@inproceedings{DietlmeierRajanLeiteretal.2023, author = {Dietlmeier, Maximilian and Rajan, Aromal Somarajan and Leiter, Nina and Wohlschl{\"a}ger, Maximilian and Versen, Martin}, title = {Klassifizierung von Altholz durch FD-FLIM Bilder mit neuronalen Netzen}, series = {Tagungsband AALE 2023}, booktitle = {Tagungsband AALE 2023}, doi = {10.33968/2023.24}, year = {2023}, abstract = {Holz ist eine der wichtigsten erneuerbaren Ressourcen und kann recycelt werden, wobei derzeit nur unbehandeltes Holz in mehreren Lebenszyklen verwendet werden kann. Allerdings werden in Altholzsortieranlagen meist behandeltes und unbehandeltes Altholz gemischt angeliefert und es gibt keine automatische Klassifizierung zur sortenreinen Sortierung. Fr{\"u}here Studien zeigen, dass behandelte und unbehandelte Holzproben mit Hilfe von bildgebender Fluoreszenzabklingzeit Mikroskopie unterschieden werden k{\"o}nnen. Um den Prozess der Klassifizierung von Altholz anhand von Fluoreszenzabklingzeitbildern zu automatisieren, werden zwei neuronale Netzwerke (NN) evaluiert. Das erste NN ist ein MLP (Multi Layer Perceptron), das das Altholz anhand von Erwartungswert und Standardabweichung eines Fluoreszenzabklingzeitbildes klassifiziert. Das zweite untersuchte NN ist ein CNN (Convolutional Neural Network), das das Holz direkt anhand der Fluoreszenzabklingzeitbilder klassifiziert. Beide Netzwerke sind in Python implementiert, um die sp{\"a}tere Verwendung in einem automatischen Klassifizierungs- und Sortierprozess zu erleichtern. Die Evaluation der NN zeigt vielversprechende Ergebnisse zur automatisierten Klassifikation von Altholz.}, language = {de} } @inproceedings{ThomasSaleemLeiteretal.2023, author = {Thomas, Amal and Saleem, Shaif and Leiter, Nina and Dietlmeier, Maximilian and Wohlschl{\"a}ger, Maximilian and Versen, Martin and Laforsch, Christian}, title = {Development of a Neural Network for an Automated Differentiation of Plastics using Rapid-FLIM}, series = {Optica Sensing Congress 2023}, booktitle = {Optica Sensing Congress 2023}, doi = {10.1364/ES.2023.EW4E.5}, year = {2023}, abstract = {The fast classification and identification of plastics presents a significant challenge. The study assesses the suitability of a Multilayer Perceptron to classify and identify commonly found plastic types using Rapid-FLIM, achieving an accuracy of 88.33\%.}, language = {en} } @inproceedings{WohlschlaegerLeiterDietlmeieretal.2023, author = {Wohlschl{\"a}ger, Maximilian and Leiter, Nina and Dietlmeier, Maximilian and L{\"o}der, Martin G.J. and Versen, Martin and Laforsch, Christian}, title = {Comparison of Two Classification Methods Trained with FD-FLIM Data to Identify and Distinguish Plastics from Environmental Materials}, series = {2023 International Joint Conference on Neural Networks (IJCNN)}, booktitle = {2023 International Joint Conference on Neural Networks (IJCNN)}, doi = {10.1109/IJCNN54540.2023.10191054}, pages = {1 -- 9}, year = {2023}, abstract = {Previous research on identifying plastic types and differentiating plastics from environmental material is promising by utilizing the specific fluorescence lifetime, but the evaluation still has to be automated. Therefore, an automated Gaussian analysis is developed for evaluating frequency-domain fluorescence lifetime images of plastics and environmental materials. Furthermore, we applied a "Multilayer Perceptron" and "Random Forest Classifier" to the data resulting from the Gaussian analysis of the frequency domain fluorescence lifetime imaging microscopy data. The classification results show high F1-scores, whereby the best "Multilayer Perceptron" and "Random Forest Classifier" achieved an F1-score of 90\%. Thus, identifying and differentiating plastics and environmental materials is possible by applying a "Multilayer Perceptron" or "Random Forest Classifier" to the Gaussian-analyzed imaged fluorescence lifetime data.}, language = {en} } @inproceedings{LeiterDietlmeierWohlschlaegeretal.2023, author = {Leiter, Nina and Dietlmeier, Maximilian and Wohlschl{\"a}ger, Maximilian and L{\"o}der, Martin G.J. and Versen, Martin and Laforsch, Christian}, title = {Development of a Neural Network for Automatic Classification of Post-Consumer Wood Using Rapid-FLIM}, series = {2023 IEEE Sensors Applications Symposium (SAS)}, booktitle = {2023 IEEE Sensors Applications Symposium (SAS)}, doi = {10.1109/SAS58821.2023.10254174}, pages = {1 -- 6}, year = {2023}, abstract = {The economic use of wood is a growing sector, not only because of the significant advantage of wood to retain CO 2 . It is crucial to increase the material recycling of wood in several lifecycles, but currently, there is no reliable post-consumer wood sorting technique in line. This research measures 365 post-consumer wood samples of classes A1-4 four times with the frequency domain fluorescence lifetime imaging microscopy (FD-FLIM) subset method rapid fluorescence lifetime imaging microscopy (Rapid-FLIM). The data is analyzed on their statistical features. Four neural networks based on Multilayer perceptron are then trained and tested with twelve statistical features extracted from the Rapid-FLIM images. The best model for this application contains the optimizer RMSprop, the activation function SELU and the loss function binary crossentropy. The best model of this structure could achieve a false positive ratio of 4.79 \% over the ten folds.}, language = {en} } @inproceedings{LeiterWohlschlaegerDietlmeieretal.2023, author = {Leiter, Nina and Wohlschl{\"a}ger, Maximilian and Dietlmeier, Maximilian and Versen, Martin and L{\"o}der, Martin and Laforsch, Christian}, title = {Comparative Analysis of Fluorescence Properties of Post-Consumer Wood Using FD-FLIM}, series = {2023 IEEE Sensors Applications Symposium (SAS)}, booktitle = {2023 IEEE Sensors Applications Symposium (SAS)}, doi = {10.1109/SAS58821.2023.10254052}, pages = {1 -- 6}, year = {2023}, abstract = {The FD-FLIM technique has a high potential for automated post-consumer wood sorting. A problem of analysing post-consumer wood fluorescence properties is the uncertainty of the post-consumer wood category as the origin of the samples are unknown. In this study, the fluorescence properties of actual post-consumer wood is compared with prepared wood samples. The post-consumer wood samples display slightly different fluorescence intensities and lifetimes due to environmental influences and a higher sample diversity. For improved training of evaluation algorithms for post-consumer wood sorting, the prepared sample set should be extended or the post-consumer wood should be additionally analysed in the laboratory.}, language = {en} } @article{LeiterWohlschlaegerVersen2023, author = {Leiter, Nina and Wohlschl{\"a}ger, Maximilian and Versen, Martin}, title = {Analysis of the phase-dependent fluorescence decay time of treated wood using FD-FLIM}, series = {tm - Technisches Messen}, volume = {90}, journal = {tm - Technisches Messen}, number = {6}, doi = {10.1515/teme-2022-0114}, pages = {401 -- 406}, year = {2023}, abstract = {For sustainable handling of wood and high material utilization, post-consumer wood has to be sorted by post-consumer wood categories in Germany. The non-destructive FD-FLIM method could improve the wood recycling process by automatic classification of waste wood into post-consumer wood classes. Thus, the phase-dependent fluorescence decay time of treated wood is analysed in this study to obtain the impact of the treatment on the fluorescence decay time. It is shown that treated and untreated wood can be differentiated using the fluorescence decay time, although the state-of-the-art theoretical fluorescence decay time differs from the experimentally determined fluorescence decay time.}, language = {en} } @inproceedings{WohlschlaegerKhanLeiteretal.2023, author = {Wohlschl{\"a}ger, Maximilian and Khan, Yamna and Leiter, Nina and Versen, Martin and L{\"o}der, Martin and Laforsch, Christian}, title = {Combining BLOB-Detection and MLP to Detect and Identify Plastics in an Environmental Matrix}, series = {2023 IEEE Sensors Applications Symposium (SAS)}, booktitle = {2023 IEEE Sensors Applications Symposium (SAS)}, doi = {10.1109/SAS58821.2023.10254171}, pages = {1 -- 5}, year = {2023}, abstract = {Environmental pollution by plastics is an increasing problem. However, state-of-the-art methods have significant disadvantages in detecting and identifying plastics directly in an environmental matrix. In this study, we propose a blob detection algorithm in combination with a neural network for fast and automated identification of plastics and non-plastics in a single fluorescence lifetime image. Therefore an artificial environmental matrix is prepared that contains soil, grass, spruce and HDPE (high density polyethylene) particles. Several FD-FLIM (frequency domain fluorescence lifetime imaging microscopy) images are taken, and the detection algorithm and the neural network are applied. We successfully demonstrated the suitability of the thresholding algorithm and the binary classification of the HDPE particles directly in the environmental matrix.}, language = {en} } @article{ManiyattuGeegyWohlschlaegeretal.2023, author = {Maniyattu, Georgekutty Jose and Geegy, Eldho and Wohlschl{\"a}ger, Maximilian and Leiter, Nina and Versen, Martin and Laforsch, Christian}, title = {Multilayer Perceptron Development to Identify Plastics Using Fluorescence Lifetime Imaging Microscopy}, series = {EDFA Technical Articles}, volume = {25}, journal = {EDFA Technical Articles}, number = {3}, doi = {10.31399/asm.edfa.2023-3.p031}, pages = {31 -- 37}, year = {2023}, abstract = {Existing plastic analysis techniques such as Fourier transform infrared spectroscopy and Raman spectroscopy are problematic because samples must be anhydrous and identification can be hindered by additives. This article describes a new approach that has been successfully demonstrated in which plastics can be classified by neural networks that are trained, validated, and tested by frequency domain fluorescence lifetime imaging microscopy measurements.}, language = {en} } @inproceedings{WohlschlaegerKhanLeiteretal.2023, author = {Wohlschl{\"a}ger, Maximilian and Khan, Yamna and Leiter, Nina and Versen, Martin and L{\"o}der, Martin and Laforsch, Christian}, title = {Development of a BLOB-detection algorithm based on DoG to detect Plastic in an environmental matrix using FD-FLIM}, series = {Optica Sensing Congress 2023 (AIS, FTS, HISE, Sensors, ES)}, booktitle = {Optica Sensing Congress 2023 (AIS, FTS, HISE, Sensors, ES)}, doi = {10.1364/ES.2023.EW4E.4}, year = {2023}, abstract = {The direct identification of plastics in an environmental matrix is heavily researched. We successfully developed a BLOB-detection algorithm based on differences of Gaussians to identify HDPE particles in an artificial environmental matrix using FD-FLIM.}, language = {en} } @inproceedings{SchwarzWohlschlaegerLeiteretal.2023, author = {Schwarz, Jonas and Wohlschl{\"a}ger, Maximilian and Leiter, Nina and Auer, Veronika and Risse, Michael and Versen, Martin}, title = {Frequency Domain Fluorescence Lifetime Imaging Microscopy (FD-FLIM) analysis of Quercus robur samples for origin differentiation purposes}, series = {Optica Sensing Congress 2023 (AIS, FTS, HISE, Sensors, ES)}, booktitle = {Optica Sensing Congress 2023 (AIS, FTS, HISE, Sensors, ES)}, doi = {10.1364/AIS.2023.JTu4A.10}, year = {2023}, abstract = {Increasing demand for wood products requires methods to determine its harvest origin and ensure sustainable and legal sourcing. In 15 out of 21 cases, the origin of Quercus robur was differentiable in FD-FLIM studies.}, language = {en} }