@article{TimpteMeckingSchandaetal.2017, author = {Timpte, A. and Mecking, S. and Schanda, Ulrich and Rabold, A.}, title = {Stoßstellend{\"a}mm-Maße von Brettsperrholzkonstruktionen}, series = {Deutsche Gesellschaft f{\"u}r Akustik e.V. (ed.), Fortschritte der Akustik - DAGA}, journal = {Deutsche Gesellschaft f{\"u}r Akustik e.V. (ed.), Fortschritte der Akustik - DAGA}, year = {2017}, language = {de} } @inproceedings{TimpteMeckingSchandaetal.2017, author = {Timpte, A. and Mecking, S. and Schanda, Ulrich and Rabold, A.}, title = {Vibration reduction indices of CLT junctions}, series = {Proceedings of ICSV24}, booktitle = {Proceedings of ICSV24}, year = {2017}, abstract = {The multi-disciplinary research project "Vibroacoustic analysis in the planning process of timber constructions" carried out in cooperation between the University of Applied Sciences Rosenheim, the ift Rosenheim and the Technical University Munich is a comprehensive study of direct as well as flanking structure-borne and airborne sound insulation of Cross Laminated Timber (CLT) elements and their junctions. The aim is to optimize and simplify the acoustical planning process of wooden multi-storey buildings and thereby to contribute to the increase growth of timber construction industry in Europe. For a prediction of the acoustical performance of solid wood constructions, the vibration reduction index Kij is needed. The vibration reduction index can be determined i.a. of the direction-averaged junction velocity level difference and the structural reverberation time. Both quantities need to be measured according to EN ISO 10848. Alternatively, vibration reduction indices for a T- or cross-junction can be derived following the procedures described in prEN ISO 12354-1:2016. However, further knowledge and data of the sound transmission across junctions of CLT is inevitable for a reliable prediction. In this paper a collection of frequency dependent vibration reduction indices for CLT structures will be presented and compared, involving L-, T- and cross-junctions measured by six international laboratories.}, language = {de} } @techreport{RaboldSchramm2015, author = {Rabold, A. and Schramm, M.}, title = {Vibroakustik im Planungsprozess f{\"u}r Holzbauten - Modellierung, numerische Simulation, Validierung - Teilprojekt 4: Bauteilpr{\"u}fung, FEM-Modellierung und Validierung}, year = {2015}, language = {de} } @inproceedings{RaboldSchrammChateauvieuxHellwig2015, author = {Rabold, A. and Schramm, M. and Ch{\^a}teauvieux-Hellwig, C.}, title = {SEA based prediction for integrated vibroacoustical design optimization of multi-storey buildings}, series = {Proceedings of Euronoise 2015}, booktitle = {Proceedings of Euronoise 2015}, year = {2015}, language = {de} } @inproceedings{RaboldSchrammChateauvieuxHellwig2015, author = {Rabold, A. and Schramm, M. and Ch{\^a}teauvieux-Hellwig, C.}, title = {Stoßstellend{\"a}mm-Maße von Massivholzelementen f{\"u}r die SEA basierte Berechnung nach EN 12354}, series = {Deutsche Gesellschaft f{\"u}r Akustik e.V. (ed.), Fortschritte der Akustik - DAGA}, booktitle = {Deutsche Gesellschaft f{\"u}r Akustik e.V. (ed.), Fortschritte der Akustik - DAGA}, year = {2015}, language = {de} } @inproceedings{RaboldChateauvieuxHellwigMecking2017, author = {Rabold, A. and Ch{\^a}teauvieux-Hellwig, C. and Mecking, S.}, title = {Optimierung von Holzdecken in Bezug auf die DIN 4109}, series = {Forum Holzbau HBS}, booktitle = {Forum Holzbau HBS}, year = {2017}, language = {de} } @article{ChateauviexHellwigMeckingBrummeretal.2016, author = {Ch{\^a}teauviex-Hellwig, C. and Mecking, S. and Brummer, B. and Rabold, A.}, title = {Anwendung zur SEA basierten Berechnung nach EN 12354 f{\"u}r Massivholzelemente}, series = {Deutsche Gesellschaft f{\"u}r Akustik e.V. (ed.), Fortschritte der Akustik - DAGA}, journal = {Deutsche Gesellschaft f{\"u}r Akustik e.V. (ed.), Fortschritte der Akustik - DAGA}, year = {2016}, language = {de} } @incollection{RaboldCheretSchwaneretal.2013, author = {Rabold, Andreas and Cheret, P. and Schwaner, K. and Seidel, A.}, title = {Schallschutz im Holzbau}, series = {Urbaner Holzbau - Chancen und Potentiale f{\"u}r die Stadt}, booktitle = {Urbaner Holzbau - Chancen und Potentiale f{\"u}r die Stadt}, publisher = {Dom Publishers}, address = {Berlin}, publisher = {Technische Hochschule Rosenheim}, year = {2013}, abstract = {Bis in die 1990er Jahre wurde der Holzbau vornehmlich in l{\"a}ndlichen Regionen, allenfalls in stadtnahen Randgebieten gesehen. Seither hat sich viel getan. Ausgerechnet im urbanen Raum w{\"a}chst der Wunsch nach Holzbauwerken aller Art. Neben vielen Alltagsaufgaben, die der Stadtreparatur oder der Sanierung des Bestands zuzuordnen sind und bei denen sich der Holzbau unauff{\"a}llig bew{\"a}hrt, erregen neuartige Geb{\"a}ude in der Fachwelt besonderes Aufsehen. Sie zeigen nicht nur die Machbarkeit mehrgeschossiger Holzbauten in den Innenst{\"a}dten, sondern auch ihr st{\"a}dtebauliches und architektonisches Potenzial. Auf diesen Seiten untersuchen namhafte Experten die Stadtentwicklung der j{\"u}ngsten Zeit und loten in diesem Kontext die M{\"o}glichkeiten des Holzbaus aus. Neben den baurechtlichen Voraussetzungen wird der aktuelle technische Stand des Holzbaus ebenso dargestellt wie sein {\"o}kologischer und energetischer Nutzen. Die Nachhaltigkeit als 300 Jahre altes Prinzip der Forstbewirtschaftung ist nun auch Maxime f{\"u}r das Planen, Bauen und Betreiben von Geb{\"a}uden. Dass die Entwicklung der St{\"a}dte neues Potenzial f{\"u}r den Holzbau freisetzt und sich hier St{\"a}dteplaner, Architekten und Ingenieure die Vorteile des Baustoffes zu Nutze machen, belegt eine Dokumentation 22 beispielgebender Geb{\"a}ude der letzten Jahre. Mit Unterst{\"u}tzung des Landesbetriebs ForstBW und der Nachhaltigkeitsstrategie Baden-W{\"u}rttemberg - Themenfeld Zukunftsf{\"a}hige Entwicklung von St{\"a}dten und Regionen, Projekt Bauen mit Holz - wurde das Buch „Urbaner Holzbau - Chancen und Potenziale f{\"u}r die Stadt" von Peter Cheret, Kurt Schwaner und Arnim Seidel herausgegeben, dessen Inhalte hier in verk{\"u}rzter Form wiedergegeben sind.}, language = {de} } @inproceedings{RaboldDuesterRank2007, author = {Rabold, Andreas and D{\"u}ster, A. and Rank, E.}, title = {Anwendung der Finiten Elemente Methode auf die Trittschallberechnung von Holzdecken}, series = {DAGA Tagungsband}, booktitle = {DAGA Tagungsband}, year = {2007}, abstract = {Die Optimierung der tieffrequenten Trittschalld{\"a}mmung von Holzdecken kann durch Berechnungen mit der finiten Elemente Methode (FEM) effektiv gestaltet werden. Die mit der FEM berechneten Ei genwerte und Eigenmoden des Bauteils bilden hierbei die Basis, um durch die Modalanalyse R{\"u}ck schl{\"u}sse f{\"u}r die Bauteiloptim ierung ziehen zu k{\"o}nnen. In diesem Beitrag wird die im Rahmen eines aktuellen Gemeinschaft sprojektes mit dem ibp Stuttgart und dem ift Rosenheim erfolgte Anwendung der FEM zur Berechnung der Trittschalld{\"a}mmung im {\"U}berblick vorgestellt und auf die Modellierung der Anregungskraft detaillierter eingegangen.}, language = {de} } @inproceedings{RaboldDuester2008, author = {Rabold, Andreas and D{\"u}ster, A.}, title = {FEM based prediction model for the impact sound level of floors}, series = {EURONOISE 2008- Conference Proceedings}, booktitle = {EURONOISE 2008- Conference Proceedings}, year = {2008}, abstract = {Up to now the research and developmen t in the field of building acoustics is based mainly on measurements. The consequence is that the development and optimization of a new building component is a very tedious and expensive task. A considerably reduction of these costs could be achieved, if the optimization relying on measurements would be replaced - at least to some extent - by a computational prediction model. Motivated by these aspects a method is presented for using finite element techniques to estimate the impact sound level from lightweight floors. The overall approach consists of the three-dimensional modeling of the structure and the excitation source (tapping machine), the subsequent moda l- and spectral analyses an d the computation of the radiated sound from the ceiling.}, language = {en} } @inproceedings{RaboldDuesterHessingeretal.2009, author = {Rabold, Andreas and D{\"u}ster, A. and Hessinger, J. and Rank, E.}, title = {Optimization of lightweight floors in the low frequency range with a FEM based prediction model}, series = {DAGA Tagungsband}, booktitle = {DAGA Tagungsband}, year = {2009}, abstract = {The impact noise transmission at low frequencies is a well known problem of lightweight floors, which is treated in many publications. A satisfying solution, considering the different construction principles of lightweight floors, could not be found so far. To overcome this problem a FEM based prediction model for the optimization of the floor construction and the improvement of the impact sound insulation has been developed and applied in a current research project at th e TU M{\"u}nchen. The details of the prediction model were published in [1]-[3]. This contribution gives an overview of the prediction model and shows the results of the computations and the construction rules developed for optimized lightweight floors.}, language = {en} } @article{RaboldBuchschmiedDusteretal.2010, author = {Rabold, Andreas and Buchschmied, M. and Duster, A. and M{\"u}ller, G. and Rank, E.}, title = {Modelling the excitation force of a standard tapping machine on lightweight floor structures}, series = {Journal of building acustics}, journal = {Journal of building acustics}, year = {2010}, abstract = {Up to now the research and development in the field of building acoustics is based mainly on measurements. In consequence the development and optimization of a new building component is a very tedious and expensive task. A considerable reduction of these costs could be achieved, if the optimization relying on measurements would be replaced - at least to some extent - by a computational prediction model. For these models it is necessary to represent not only the component and the adjacent rooms but also the excitation in a suitable way. This paper gives an overview of models for the excitation generated by a standard tapping machine taking into account the interaction between the impacting steel cylinders of the tapping machine and the vibrating surface of the floor.}, language = {en} } @inproceedings{ChateauvieuxHellwigSchandaRaboldetal.2014, author = {Chateauvieux-Hellwig, C. and Schanda, Ulrich and Rabold, A. and Schramm, M.}, title = {Messmethodenvergleich f{\"u}r das Stoßstellend{\"a}mm-Maß von Massivholzelementen. Vibroakustik im Planungsprozess f{\"u}r Holzbauten, Teil 3.}, series = {Deutsche Gesellschaft f{\"u}r Akustik e.V. (ed.), Fortschritte der Akustik - DAGA}, booktitle = {Deutsche Gesellschaft f{\"u}r Akustik e.V. (ed.), Fortschritte der Akustik - DAGA}, year = {2014}, language = {de} } @inproceedings{Rabold2011, author = {Rabold, A.}, title = {Trittschalld{\"a}mmung richtig bewerten}, series = {1. Internationale Schall- und Akustiktage}, booktitle = {1. Internationale Schall- und Akustiktage}, year = {2011}, language = {de} } @inproceedings{RaboldSchandaHessinger2011, author = {Rabold, A. and Schanda, Ulrich and Hessinger, J.}, title = {Korrelation zwischen Geher und Norm-Hammerwerk bei der Trittschall{\"u}bertragung}, series = {Deutsche Gesellschaft f{\"u}r Akustik e.V. DAGA}, booktitle = {Deutsche Gesellschaft f{\"u}r Akustik e.V. DAGA}, year = {2011}, language = {de} } @inproceedings{RaboldWisselSchandaetal.2010, author = {Rabold, A. and Wissel, C. and Schanda, Ulrich and Hessinger, J.}, title = {Prognose der Schalld{\"a}mmung von leichten Trennw{\"a}nden}, series = {Deutsche Gesellschaft f{\"u}r Akustik e.V. DAGA}, booktitle = {Deutsche Gesellschaft f{\"u}r Akustik e.V. DAGA}, year = {2010}, language = {de} } @inproceedings{DolezalSchrammRaboldetal.2010, author = {Dolezal, F. and Schramm, M. and Rabold, A. and Schanda, Ulrich}, title = {Stoßstellen im Holzbau - Planung, Prognose und Ausf{\"u}hrung}, series = {Deutsche Gesellschaft f{\"u}r Akustik e.V. DAGA}, booktitle = {Deutsche Gesellschaft f{\"u}r Akustik e.V. DAGA}, year = {2010}, language = {de} } @inproceedings{ReicheltSchandaRabold2009, author = {Reichelt, H. and Schanda, Ulrich and Rabold, A.}, title = {Reduction of Low-frequency Vibrations of Wooden Floors by Tuned Mass Dampers}, series = {Deutsche Gesellschaft f{\"u}r Akustik e.V. DAGA}, booktitle = {Deutsche Gesellschaft f{\"u}r Akustik e.V. DAGA}, year = {2009}, language = {en} }