@inproceedings{VersenTreichlKalteneckeretal.2018, author = {Versen, Martin and Treichl, R. and Kaltenecker, M. and El Shahawy, H. and Thomas, T. T.}, title = {Differentielle LVDS Schnittstelle f{\"u}r modellbasierte Entw{\"u}rfe mit MathWorks HDL Coder}, series = {15. AALE Konferenz zu Cyberphysischen Produktionssystemen, 2018}, booktitle = {15. AALE Konferenz zu Cyberphysischen Produktionssystemen, 2018}, publisher = {VDE-Verlag}, address = {Berlin}, isbn = {978-3-8007-4522-7}, year = {2018}, language = {de} } @article{VersenErnstGulati2017, author = {Versen, Martin and Ernst, W. and Gulati, P.}, title = {A row hammer pattern analysis of DDR2 SDRAM}, series = {Microelectronics Reliability}, volume = {76-77}, journal = {Microelectronics Reliability}, pages = {64 -- 67}, year = {2017}, abstract = {A DDR2 SDRAM test setup implemented on the Griffin III ATE test system from HILEVEL Technologies is used to analyse the row hammer bug. Row hammer pattern experiments are compared to standard retention tests. The analysis confirms that the row hammer effect is caused by a charge excitation process depending on the number of stress activation cycles. The stress has to occur in the local neighborhood of the cells under test. Shallow impurity levels support the responsible charge carrier transport process in the used DDR2 SDRAM technology}, language = {en} } @article{VersenErnstGulatietal.2015, author = {Versen, Martin and Ernst, W. and Gulati, P. and Singh, G.}, title = {Test setup for reliability studies of DDR2 SDRAM}, series = {Microelectronics Reliability}, journal = {Microelectronics Reliability}, year = {2015}, abstract = {A DDR2 DRAM test setup is developed and implemented on the Griffin III ATE test system from HILEVEL Technologies. The test system provides a raw platform for performing various mixed signal and digital tests. In order to configure patterns easily in a vector format, a software platform is developed to manage test patterns according to the user's analysis needs. As examples, retention test patterns with disabled self-refresh are applied to 2 Gbit DDR2 SDRAM of two different DRAM vendors. The devices are characterized in respect to their intrinsic leakage and data retention behavior under the influence of stress conditions such as temperature or access algorithm. The tests are automated and test data is logged for an off-line data analysis. Data is recorded before and after solder simulation steps in order to observe a retention time degradation.}, language = {en} } @misc{ZentgrafErb2009, author = {Zentgraf, Peter and Erb, S.}, title = {IMPACT OF ELECTRIC PROPULSION UNCERTAINTY ON ORBIT PREDICTION}, editor = {Zentgraf, Peter}, year = {2009}, abstract = {This paper analyses the achievable performance of the orbit prediction for a geostationary satellite using clusters of electrical propulsion (EP) thrusters for station-keeping and a star tracker based attitude control system. The challenge in the orbit prediction is that the real electrical propulsion thrust is known with limited accuracy only. In combination with thrust pointing errors, these inaccuracies can accumulate to large orbit position errors during long low thrust burn arcs. The discrepancy between real and predicted satellite position is determined in terms of probability and as a worst case scenario.}, language = {en} } @inproceedings{EbenKarlingerGehde2013, author = {Eben, J. and Karlinger, Peter and Gehde, M.}, title = {"Bitte nicht St{\"o}ren" - Analyse des St{\"o}rgr{\"o}ßeneinflusses auf Prozess und Qualit{\"a}t}, series = {23. Fachtagung TECHNOMER 2013 14./15. November 2013}, booktitle = {23. Fachtagung TECHNOMER 2013 14./15. November 2013}, year = {2013}, language = {de} } @book{KarlingerBuerkleWobbe2013, author = {Karlinger, Peter and B{\"u}rkle, and Wobbe,}, title = {Reinraumtechnik in der Kunststoffverarbeitung}, publisher = {Carl Hanser Verlag}, address = {M{\"u}nchen}, isbn = {ISBN 978-3-446-43,428-8}, publisher = {Technische Hochschule Rosenheim}, year = {2013}, language = {de} } @inproceedings{VersenBernhardtHeigletal.2012, author = {Versen, Martin and Bernhardt, and Heigl, M. and Viehhauser, P. and Zentgraf, P.}, title = {System for real-time data acquisition and processing on a hail-fighter aeroplane}, series = {Proceedings of the 5th European DSP Education and Research Conference}, booktitle = {Proceedings of the 5th European DSP Education and Research Conference}, year = {2012}, abstract = {The System HAILsens implements a device for Real-Time sensor data processing, running on a Texas Instruments Concerto M3 core. An I2C interface is used for sensor communications. Ethernet with UDP on a custom developed three layered frame organisation of sensor data serves as a link to the main system on board of an aeroplane. For backing up the acquired data, all frames are locally stored on an SD Card. To have the possibility of easily checking the current system status, an LCD module and a push-button provide a minimal user interface.}, language = {en} } @inproceedings{VersenShankarEnimidisettyetal.2011, author = {Versen, Martin and Shankar, S. and Enimidisetty, S. and Bernhardt, A. and Srinivasan, B.}, title = {Setup for Locating PV-Cell Surface Defects Through ISC Measurements}, series = {Proceedings of the 37th ISTFA 2011}, booktitle = {Proceedings of the 37th ISTFA 2011}, year = {2011}, language = {en} } @inproceedings{ZentgrafBergeChassetetal.2010, author = {Zentgraf, Peter and Berge, S. and Chasset, C. and Filippi, H. and Gottzein, E. and Guti{\´e}rrez-Ca{\~n}as, I. and Hartrampf, M. and Krauss, P. A. and Kuehl, C. and L{\"u}bke- Ossenbeck, B. and Mittnacht, M. and Montenbruck, O. and M{\"u}ller, C. and Rueda Boldo, P. and Truffi, A.}, title = {PREPARING THE GPS-EXPERIMENT FOR THE SMALL GEO MISSION}, series = {33rd ANNUAL AAS GUIDANCE AND CONTROL CONFERENCE}, booktitle = {33rd ANNUAL AAS GUIDANCE AND CONTROL CONFERENCE}, editor = {American Astronautical Society,}, year = {2010}, abstract = {This paper deals with the preparation of the Small GEO mission and the accommodation of a GPS receiver as an experiment. The expected benefits of using the GPS receiver for Small GEO are explained. The feasibility of using GPS for position determination is investigated by simulation using a MosaicGNSS receiver, which was stimulated by a Spirent RF signal generator. A procedure, how to evaluate flight data on ground is outlined. Success criteria of the experiment and the minimal size of the downlink stream required and reserved for the receiver TM are presented.}, language = {en} } @article{KarlingerHartmannBarthetal.2016, author = {Karlinger, Peter and Hartmann, Markus and Barth, Simon and Schemme, Michael and Michanickl, Andreas}, title = {Holzoberfl{\"a}chen an Kunststoffteilen}, series = {Zeitschrift Kunststoffe}, journal = {Zeitschrift Kunststoffe}, year = {2016}, language = {de} } @article{KarlingerBarthHartmannetal.2016, author = {Karlinger, Peter and Barth, Simon and Hartmann, Markus and Michanickl, Andreas and Schemme, Michael}, title = {Einen Bund eingehen}, series = {Bauen mit Holz}, journal = {Bauen mit Holz}, year = {2016}, language = {de} } @article{HummelKnorrKarlingeretal.2017, author = {Hummel, Sabine and Knorr, Ludwig and Karlinger, Peter and Schemme, Michael}, title = {Eine Frage der Haftung}, series = {Kunststoffe}, journal = {Kunststoffe}, number = {07/2017}, publisher = {Carl Hanser Verlag GmbH \& Co. KG}, address = {M{\"u}nchen}, year = {2017}, abstract = {Dieser Artikel gibt ein Einblick in Hinblick auf die Verarbeitung von endlosverst{\"a}rkten Faserhalbzeuge, sogenannten Organobleche, in Kombination mit dem Spritzgießverfahren. Ein Schwerpunkt stellt die Verbundhaftung zwischen den beiden Komponenten dar. Neue Ergebnisse sollen die Gestaltungsrichtlinien der angespritzten Funktionselementen f{\"u}r derartige Bauteile f{\"u}hren. Die Verbundfestigkeit h{\"a}ngt von vielen Einflussfaktoren ab.}, language = {de} } @inproceedings{HummelSchemmeKarlinger2017, author = {Hummel, Sabine and Schemme, Michael and Karlinger, Peter}, title = {Haftungsuntersuchungen f{\"u}r Leichtbauanwendungen}, series = {Technomer 2017 - 25. Fachtagung {\"u}ber Verarbeitung und Anwendung von Polymeren}, booktitle = {Technomer 2017 - 25. Fachtagung {\"u}ber Verarbeitung und Anwendung von Polymeren}, year = {2017}, abstract = {Die Verst{\"a}rkung von Spritzgussteilen mit Faserhalbzeugen gewinnt immer mehr an Bedeutung. F{\"u}r die Einsatztauglichkeit derartiger Bauteile ist die Verbundhaftung zwischen den angespritzten Strukturen und den Faserhalbzeugen essentiell. Der Vortrag befasst sich mit den {\"a}ußeren und prozesstechnischen Einfl{\"u}ssen zu Erh{\"o}hung der Verbundhaftung auf Faserhalbzeugen. Zudem wird ein Einblick in die Pr{\"u}f-und Anlagentechnik in diesem Bereich gegeben.}, language = {de} }