@techreport{BietzHuberMeckingetal.2020, author = {Bietz, Heinrich and Huber, Anton and Mecking, Simon and Rabold, Andreas and Schmelzer, Martin and Sgrieß, Daniel and Wittstock, Volker}, title = {Mehr als nur D{\"a}mmung - Zusatznutzen von D{\"a}mmstoffen aus nachwachsenden Rohstoffen (NawaRo-D{\"a}mmstoffe), Schlussbericht zum Arbeitsbereich 2 Schallschutz}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:861-opus4-31201}, pages = {397}, year = {2020}, abstract = {Der Arbeitsbereich 2 des Verbundvorhabens hatte als Ziel, die Anwendbarkeit von D{\"a}mmstoffen aus nachwachsenden Rohstoffen unter dem Aspekt des Schallschutzes deutlich zu erh{\"o}hen. Ein zentrales technisches Ergebnis des Projektes stellt der erweiterte Bauteilkatalog f{\"u}r Holzbauteile dar, der eine umfangreiche Sammlung an Planungsdaten bietet. Dieser wurde auf Basis der Analyse und Aufbereitung vorhandener Messdaten sowie der im Projekt durchgef{\"u}hrten Pr{\"u}fungen erstellt. Innerhalb des Projektes wurden • 45 Deckenaufbauten und • 10 Wandkonstruktionen hinsichtlich ihrer schalltechnischen Eigenschaften untersucht. Dabei wurden Holztafelkonstruktionen und Massivholzkonstruktionen ber{\"u}cksichtigt. Die ermittelten Werte zeigen, dass mit den Deckenaufbauten beim Einsatz von Holzfaser-Trittschalld{\"a}mmplatten sehr gute Ergebnisse erreichbar sind. Bei entsprechender Gesamtkonstruktion k{\"o}nnen somit auch mit steiferen NawaRo-D{\"a}mmplatten die Zielwerte f{\"u}r Trenndecken eingehalten werden. Neben der Entwicklung dieser speziell f{\"u}r NawaRo-D{\"a}mmstoffe optimierten Aufbauten, konnte f{\"u}r den gesamten Bauteilkatalog eine {\"O}ffnung f{\"u}r Hohlraumd{\"a}mmstoffe aus nachwachsenden Rohstoffen erreicht werden. NawaRo-D{\"a}mmstoffe zur Hohlraumd{\"a}mpfung sollten dabei einen l{\"a}ngenbezogenen Str{\"o}mungswiderstand zwischen 5 kPa s/m² und 50 kPa s/m² und eine offene Porosit{\"a}t gr{\"o}ßer als 0,9 (entspricht bei den meisten untersuchten D{\"a}mmstoffen etwa einer Rohdichte ≤ 130 kg/m³) aufweisen. Zus{\"a}tzliche Messungen mit h{\"o}herer fl{\"a}chenbezogener Masse der Unterdecke zeigten den positiven Einfluss von brandschutz-technisch erforderlichen Zusatzbeplankungen gerade bei den besonders interessierenden tiefen Frequenzen. Ein wissenschaftliches Ergebnis des Projektes ist in der Weiterentwicklung der Simulationsmodelle f{\"u}r die Schall{\"u}bertragung zu sehen. Hierzu konnten die semianalytischen Modelle f{\"u}r die Ber{\"u}cksichtigung der Materialeigenschaften unterschiedlicher Hohlraumd{\"a}mmstoffe erweitert werden. Als zweites Simulationsmodell wurde die Finite-Elemente-Methode f{\"u}r die Berechnung der Schalld{\"a}mmung eingesetzt. F{\"u}r die Simulation wurde ein Massivholz-Wandelement mit W{\"a}rmed{\"a}mm-Verbund-System als Außenwand modelliert. Diese Außenwandkonstruktion ist von besonderem Interesse, da sie im mehrgeschossigen Wohnungsbau gerne verwendet wird, aber sowohl im Brandschutz als auch im Schallschutz noch Optimierungsbedarf aufweist.}, language = {de} } @misc{MeckingSchoenwaldSchanda2018, author = {Mecking, Simon and Schoenwald, Stefan and Schanda, Ulrich}, title = {Material characterisation of Cross Laminated Timber using experimental wave velocities}, series = {Proceedings of Euronoise 2018}, journal = {Proceedings of Euronoise 2018}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:861-opus4-25448}, year = {2018}, abstract = {In multi story buildings the use of Cross Laminated Timber (CLT) is increasing. Therefore, sound insulation requirements have to be met and the prediction of sound insulation for this construction type is necessary. With the exception of low frequencies, Statistical Energy Analysis (SEA) is used in building acoustics for this purpose, which requires material properties as input data. The material characterisation of Cross Laminated Timber is a challenge. On the one hand, the composite material consists of several layers of boards; on the other hand, wood itself is inhomogeneous, anisotropic and has a low shear modulus. Differences in the manufacturing process such as the use of glue and grooves also have an impact on the overall rigidity of the plate. A characterisation based on thin plate theory is insufficient for the frequency range of building acoustics. One possibility to address this challenge is the experimental determination of frequency dependent phase velocities of bending waves in a plate that account for the above-mentioned effects. From the wave velocities the modal density used in SEA can be calculated very efficiently. This contribution focus on the time-of-flight method and phase difference method to determine phase velocities. In a case study, the direction-dependent global stiffness parameters were determined using first shear deformation theory. The measurement conditions and evaluation procedures are discussed.}, language = {en} } @inproceedings{ChateauvieuxHellwigMeckingBrummeretal.2016, author = {Ch{\^a}teauvieux-Hellwig, Camille and Mecking, Simon and Brummer, Benjamin and Rabold, Andreas}, title = {Anwendung zur SEA basierten Berechnung nach EN 12354 f{\"u}r Massivholzelemente}, series = {Fortschritte der Akustik - DAGA}, booktitle = {Fortschritte der Akustik - DAGA}, organization = {Deutsche Gesellschaft f{\"u}r Akustik e.V.}, year = {2016}, language = {de} } @techreport{RaboldWohlmuthHorgeretal.2018, author = {Rabold, Andreas and Wohlmuth, Barbara and Horger, Thomas and Rank, Ernst and Kollmannsberger, Stefan and Frischmann, Felix and Paolini, Alexander and Schanda, Ulrich and Mecking, Simon and Kruse, Tobias and Ch{\^a}teauvieux-Hellwig, Camille and Schramm, Markus and M{\"u}ller, Gerhard and Buchschmid, Martin and Winter, Christoph}, title = {Vibroakustik im Planungsprozess f{\"u}r Holzbauten: Modellierung, numerische Simulation, Validierung: Dachbericht zum Forschungsvorhaben}, year = {2018}, language = {de} } @techreport{HuberMeckingRaboldetal.2019, author = {Huber, Anton and Mecking, Simon and Rabold, Andreas and Wittstock, Volker}, title = {Verbundvorhaben: Mehr als nur D{\"a}mmung - Zusatznutzen von D{\"a}mmstoffen aus nachwachsenden Rohstoffen (NawaRo-D{\"a}mmstoffe): Teilvorhaben 3 und 6 - Arbeitsbericht 2 Schallschutz: Zwischenbericht 3}, year = {2019}, language = {de} } @inproceedings{RaboldChateauvieuxHellwigMecking2019, author = {Rabold, Andreas and Ch{\^a}teauvieux-Hellwig, Camille and Mecking, Simon}, title = {Flanking transmission of solid wood elements in multi-storey timber buildings - input data and prediction models for airborne and impact sound excitation -}, series = {Proceedings of Inter-Noise 2019}, booktitle = {Proceedings of Inter-Noise 2019}, year = {2019}, language = {en} } @article{MeckingRaboldHuber2019, author = {Mecking, Simon and Rabold, Andreas and Huber, Anton}, title = {Insulation materials made of renewable raw materials for the sound insulation prognosis of building components}, series = {Proceedings of ICA 2019}, journal = {Proceedings of ICA 2019}, year = {2019}, language = {en} } @inproceedings{MeckingRaboldHuber2019, author = {Mecking, Simon and Rabold, Andreas and Huber, Anton}, title = {D{\"a}mmstoffe aus nachwachsenden Rohstoffen in der Bauteilprognose}, series = {Fortschritte der Akustik - DAGA}, booktitle = {Fortschritte der Akustik - DAGA}, organization = {Deutsche Gesellschaft f{\"u}r Akustik e.V.}, isbn = {978-3-939296-14-0}, year = {2019}, language = {de} } @inproceedings{HuberRaboldMecking2020, author = {Huber, Anton and Rabold, Andreas and Mecking, Simon}, title = {D{\"a}mmstoffe aus nachwachsenden Rohstoffen in der Bauteilprognose mittels der Finiten-Elemente-Methode}, series = {Fortschritte der Akustik - DAGA}, booktitle = {Fortschritte der Akustik - DAGA}, organization = {Deutsche Gesellschaft f{\"u}r Akustik e.V.}, year = {2020}, language = {de} } @inproceedings{RaboldMeckingHuber2022, author = {Rabold, Andreas and Mecking, Simon and Huber, Anton}, title = {Schalltechnische Aspekte bei NaWaRo-D{\"a}mmstoffen: Details aus dem Inneren}, series = {Bauphysik \& Geb{\"a}udetechnik}, booktitle = {Bauphysik \& Geb{\"a}udetechnik}, organization = {Forum Holzbau}, isbn = {978-3-906226-41-5}, year = {2022}, language = {de} }