@incollection{Versen2011, author = {Versen, Martin}, title = {DRAM Failure Analysis and Defect Localization Techniques, Microelectronics Failure Analysis}, series = {Desk Reference Sixth Edition}, booktitle = {Desk Reference Sixth Edition}, publisher = {ASM International}, address = {Ohio}, publisher = {Technische Hochschule Rosenheim}, year = {2011}, abstract = {Comprehensive guide to the process and test methods used for electronic device failure analysis. Contains dozens of articles—contributed by industry experts—covering a wide range of topics involving the failure analysis of microelectronics. It places the most important and up-to-date information on this subject at your fingertips.  Topic coverage includes:  Failure Analysis Process Flow Failure Verification  Failure Modes and Failure Classification  Special Devices (MEMS, Optoelectronics, Passives)  Fault Localization Techniques: Package Level (NDT)  Die Level (Depackaging, Photon Emission, Microthermography, Laser-Based Methods, Particle Beam Methods)  Deprocessing \& Imaging Techniques: Deprocessing  General Imaging Techniques  Local Deprocessing \& Imaging  Circuit Edit and Design Modification  Material Analysis Techniques  Reference Information: Important Topics for Semiconductor Devices  Failure Analysis Techniques Roadmap  Failure Analysis Operations and Management  Appendices: Failure Analysis Terms, Definitions, and Acronyms  Industry Standards}, language = {en} } @inproceedings{Versen2011, author = {Versen, Martin}, title = {Worst Case Test Conditions for Defect Localization in DRAM Devices}, series = {Microelectronics Seminar of the ISTFA 2011}, booktitle = {Microelectronics Seminar of the ISTFA 2011}, year = {2011}, language = {en} } @inproceedings{Zentgraf2017, author = {Zentgraf, Peter}, title = {ANALYTICAL ATTITUDE DETERMINATION FROM A SPECIFIC RATE PROFILE}, series = {40th ANNUAL AAS GUIDANCE AND CONTROL CONFERENCE, Breckenridge, Colorado, USA}, booktitle = {40th ANNUAL AAS GUIDANCE AND CONTROL CONFERENCE, Breckenridge, Colorado, USA}, year = {2017}, abstract = {The problem dealt with in this paper is the analytical determination of the attitude of a rigid body which undergoes a given rate profile. Usually the attitude is determined by solving the kinematic differential equation numerically. For long lasting movements the outcome can cost computation time plus encountered losses in accuracy, which can be disturbing especially in optimization problems. This contribution solves the kinematic differential equation for certain rate profiles exactly and compares the results in accuracy and computation time with the standard procedures.}, language = {en} } @article{SchittenhelmBerndt2000, author = {Schittenhelm, Wolfgang and Berndt, T.}, title = {OPC - die Schnittstelle des PC f{\"u}r die Automatisierungstechnik}, series = {Rosenheimer Hochschulhefte 1981 - 2007 (Zeitschrift der Fachhochschule Rosenheim)}, volume = {2000}, journal = {Rosenheimer Hochschulhefte 1981 - 2007 (Zeitschrift der Fachhochschule Rosenheim)}, organization = {Fachhochschule Rosenheim}, year = {2000}, language = {de} } @article{Schittenhelm2001, author = {Schittenhelm, Wolfgang}, title = {WEBROB - Ein Roboter im Internet}, series = {Rosenheimer Hochschulhefte 1981 - 2007 (Zeitschrift der Fachhochschule Rosenheim)}, volume = {2001}, journal = {Rosenheimer Hochschulhefte 1981 - 2007 (Zeitschrift der Fachhochschule Rosenheim)}, organization = {Fachhochschule Rosenheim}, year = {2001}, language = {de} } @inproceedings{SchittenhelmKarlingerOberauer2013, author = {Schittenhelm, Wolfgang and Karlinger, Peter and Oberauer, Josef}, title = {Energieeffiziente Regelung der L{\"u}ftung und Klimatisierung eines Reinraumes f{\"u}r die Kunststoffproduktion}, series = {Tagungsband AALE (Angewandte Automatisierungstechnik in Lehre und Entwicklung), 10. Fachkonferenz, 28. Februar - 1. M{\"a}rz 2013, Stralsund.}, booktitle = {Tagungsband AALE (Angewandte Automatisierungstechnik in Lehre und Entwicklung), 10. Fachkonferenz, 28. Februar - 1. M{\"a}rz 2013, Stralsund.}, publisher = {Deutscher Industrieverlag}, address = {M{\"u}nchen}, isbn = {978-3-8356-3364-3}, pages = {143 -- 153}, year = {2013}, language = {de} } @article{SchittenhelmFischer1998, author = {Schittenhelm, Wolfgang and Fischer, K.}, title = {SEPP: ein studentisches Projekt der Elektrotechnik}, series = {Rosenheimer Hochschulhefte 1981 - 2007 (Zeitschrift der Fachhochschule Rosenheim)}, volume = {1998}, journal = {Rosenheimer Hochschulhefte 1981 - 2007 (Zeitschrift der Fachhochschule Rosenheim)}, organization = {Fachhochschule Rosenheim}, year = {1998}, language = {de} } @article{SchittenhelmKoenig2000, author = {Schittenhelm, Wolfgang and K{\"o}nig, Andreas}, title = {Studentische Projektarbeit im Labor Automatisierungstechnik}, series = {Rosenheimer Hochschulhefte 1981 - 2007 (Zeitschrift der Fachhochschule Rosenheim)}, volume = {2000}, journal = {Rosenheimer Hochschulhefte 1981 - 2007 (Zeitschrift der Fachhochschule Rosenheim)}, organization = {Fachhochschule Rosenheim}, year = {2000}, language = {de} } @inproceedings{ZentgrafReggio2009, author = {Zentgraf, Peter and Reggio, D.}, title = {MAGNETIC RATE DAMPING FOR SATELLITES IN LEO}, series = {32nd ANNUAL AAS GUIDANCE AND CONTROL CONFERENCE}, booktitle = {32nd ANNUAL AAS GUIDANCE AND CONTROL CONFERENCE}, year = {2009}, abstract = {This article deals with the topic of damping the rates of a satellite after separation from the launcher by sensing the rates with magnetometers or gyroscopes and actually damping it with torquerods or thrusters. In literature problems of this kind are treated by linearization which is not adequate here due to the high nonlinearity of the problem caused by the high gyroscopic torque. This paper addresses the observability and controllability of the rate dynamics for symmetric satellite bodies. Furthermore, robust stability of any bodies is investigated by means of the Krasovskii-LaSalle principle which is a variant of Ljapunov's Second Method. It is found that - apart from one exception - the system is robustly stable for certain conditions depending only on the gain matrix and not depending on the orbit, moments of inertia or initial conditions. The exception is that of the intuitive case of an equator type orbit, in which the satellite rotates around the magnetic field lines, in this case the satellite's rate cannot be damped. Several design configurations are analysed with respect to their performance and cost: Rate damping with magnetometers or gyroscopes as sensors, and torquerods and thrusters as actuators. The results are evaluated with respect to the time to reach the desired rate, the propellant and the power equivalent battery mass used. The goal is to use the results to allow an AOCS equipment and architecture trade-off at an early project phase. The design of the rate damping control of the SWARM project is presented as an example and demonstrated with simulations.}, language = {en} } @article{PiepenbrinkSchittenhelm2003, author = {Piepenbrink, A. and Schittenhelm, Wolfgang}, title = {Pneumatiksystem im Selbstbau}, series = {Zeitschrift fluid}, journal = {Zeitschrift fluid}, number = {Nr. 9 + 10/2003}, publisher = {Verlag moderne Industrie}, address = {Landsberg am Lech}, year = {2003}, language = {de} } @inproceedings{VersenKipfelsberger2014, author = {Versen, Martin and Kipfelsberger, S.}, title = {Introduction to microcomputer technology with the MSP430 Launch Pad in remote labs}, series = {Global Engineering Education Conference (EDUCON), 2014 IEEE}, booktitle = {Global Engineering Education Conference (EDUCON), 2014 IEEE}, year = {2014}, abstract = {Texas Instruments' MSP430 Launch Pad is used as a key component for remote labs that complement an introduction course to microcomputer technology in the bachelor program Mechatronic at the University of Applied Sciences in Rosenheim. The remote labs use breakout boards and include a timer experiment with generation of pulse width modulation signals, I2C communication and analog to digital conversion.}, language = {en} } @inproceedings{VersenKipfelsbergerSoekmen2016, author = {Versen, Martin and Kipfelsberger, F. and Soekmen, F.}, title = {Model-Based Reference Design Projects with MathWorks' HDL Workflow Advisor for Custom-Specific Electronics with the Zedboard}, series = {ANALOG 2016; 15. ITG/GMM-Symposium, Bremen, Germany}, booktitle = {ANALOG 2016; 15. ITG/GMM-Symposium, Bremen, Germany}, year = {2016}, abstract = {Reference design projects are implemented to the Xilinx Zynq on the Zedboard which is extended by user defined electronic hardware connected through the Zedboard's FMC (FPGA Mezzanine Card) connector. The implementation method with HDL Workflow Advisor includes constraint definitions for modified reference design projects for use with digital input and outputs and Zynq's XADC (Analog-Digital converter) which is characterized and compared to its data sheet. The bandwidth of the Zynq's internal AXI (Advanced eXtensible Interface) bus connected to the Simulink host PC is determined.}, language = {en} } @article{Karlinger2014, author = {Karlinger, Peter}, title = {R{\"u}ckblick auf die Benediktbeurer Reinraumtage 2014 Schriftliches Interview}, series = {Cleanroom Magazin}, journal = {Cleanroom Magazin}, number = {2/2014}, year = {2014}, language = {de} } @inproceedings{Karlinger2014, author = {Karlinger, Peter}, title = {Einfluss der Verarbeitung auf die Bauteilqualit{\"a}t}, series = {4. VDI-Fachkonferenz Kunststoffe in optischen Systemen}, booktitle = {4. VDI-Fachkonferenz Kunststoffe in optischen Systemen}, year = {2014}, language = {de} } @inproceedings{SpaethKarlinger2017, author = {Sp{\"a}th, Michael and Karlinger, Peter}, title = {Optimierungspotenziale beim Spritzgießen durch Prozess{\"u}berwachung und moderne Regelmethoden}, series = {Spritzgießertagung Baden-Baden}, booktitle = {Spritzgießertagung Baden-Baden}, year = {2017}, language = {de} } @techreport{KarlingerMercadoColmeneroRubioParamioetal.2017, author = {Karlinger, Peter and Mercado-Colmenero, Jorge Manuel and Rubio-Paramio, Miguel Angel and Martin-Do{\~n}ate, Cristina}, title = {A new procedure for calculating cycle time in injection molding based on plastic part geometry recognition}, year = {2017}, language = {en} } @inproceedings{SchemmeMichanicklKarlinger2015, author = {Schemme, Markus and Michanickl, Andreas and Karlinger, Peter}, title = {Neue Naturfaser - Kunststoffverfahren und - werkstoffe f{\"u}r den Fahrzeug-, Holz- und M{\"o}belbau}, series = {2. Kooperationsforum „Holz als neuer Werkstoff" Regensburg}, booktitle = {2. Kooperationsforum „Holz als neuer Werkstoff" Regensburg}, year = {2015}, language = {de} } @inproceedings{Karlinger2016, author = {Karlinger, Peter}, title = {Internationales Kunststoffsymposium S{\~a}o Paulo MODERA{\c{C}}{\~A}O}, series = {Vis{\~a}o Geral - 4.0 Aktueller Stand und Entwicklung}, booktitle = {Vis{\~a}o Geral - 4.0 Aktueller Stand und Entwicklung}, year = {2016}, language = {de} } @techreport{Karlinger2014, author = {Karlinger, Peter}, title = {Prozessoptimierung und Energieeffizienz: Forschung an Reinr{\"a}umen in der Kunststoffproduktion}, year = {2014}, language = {de} } @inproceedings{Karlinger2014, author = {Karlinger, Peter}, title = {Kunststoffe f{\"u}r Produkte in Reinraumanwendungen}, series = {17. Expertentage - Innovationen}, booktitle = {17. Expertentage - Innovationen}, year = {2014}, language = {de} } @techreport{SchemmeMichanicklKarlinger2017, author = {Schemme, M. and Michanickl, A. and Karlinger, Peter}, title = {Kompetenz-Zentrum Holz-Kunststoff, Partnering-Veranstaltung f{\"u}r Holz- und biobasierte Werkstoffe und Verbundwerkstoffe}, year = {2017}, language = {de} } @inproceedings{SchefflerGehdeSpaethetal.2017, author = {Scheffler, T. and Gehde, M. and Sp{\"a}th, M. and Karlinger, Peter}, title = {Determination of the flow and curing behavior of highly filled phenolic injection molding compounds by means of spiral mold}, series = {PPS Chemnitz}, booktitle = {PPS Chemnitz}, year = {2017}, language = {en} } @article{KarlingerSchwachulla2017, author = {Karlinger, Peter and Schwachulla, T.}, title = {Multifunktionale Naturfaser-Kunststoff-Composites}, series = {Firmenzeitschrift Motan}, journal = {Firmenzeitschrift Motan}, number = {4.Quartal 2017}, year = {2017}, language = {de} } @inproceedings{SpaethZillmerKarlingeretal.2017, author = {Sp{\"a}th, Michael and Zillmer, Markus and Karlinger, Peter and Schemme, Michael and Gehde, Michael}, title = {Einfluss des zeitabh{\"a}ngigen Materialzustands beim Spritzgießen von rieself{\"a}higen, duromeren Formmassen auf den Prozess und die Bauteileigenschaften}, series = {Technomer Chemnitz}, booktitle = {Technomer Chemnitz}, year = {2017}, language = {de} } @article{KarlingerSchadhauserMartinetal.2017, author = {Karlinger, Peter and Schadhauser, M. and Martin, J. and W{\"u}rtele, M. and Modler, N.}, title = {Homogenit{\"a}t ist der Schl{\"u}ssel}, series = {Kunststoffe}, journal = {Kunststoffe}, number = {9/2017}, year = {2017}, language = {de} } @misc{Karlinger2008, author = {Karlinger, Peter}, title = {Spritzgießmaschinen und Spritzgießen}, editor = {Karlinger, Peter}, year = {2008}, language = {de} } @inproceedings{Karlinger2013, author = {Karlinger, Peter}, title = {Kunststoff-Fertigung unter quasi Reinraumbedingungen, eine Produktionsumgebung f{\"u}r aktuelle und neue Technologien Bitte partikelfrei!}, series = {Technische Sauberkeit in der Kunststoff-Fertigung}, booktitle = {Technische Sauberkeit in der Kunststoff-Fertigung}, year = {2013}, language = {de} } @techreport{Karlinger2014, type = {Working Paper}, author = {Karlinger, Peter}, title = {Kunststoff-Fertigung unter quasi Reinraumbedingungen Vortrag zum Clustertreffen Medizintechnik.}, series = {Clustertreffen Medizintechnik}, journal = {Clustertreffen Medizintechnik}, year = {2014}, language = {de} } @inproceedings{KarlingerDittelBuerkle2015, author = {Karlinger, Peter and Dittel, G. and B{\"u}rkle, E.}, title = {Benedigtbeuerer Reinraumtage}, series = {Benedigtbeuerer Reinraumtage, Tagungshandb{\"u}cher, 2002 - 2015.}, booktitle = {Benedigtbeuerer Reinraumtage, Tagungshandb{\"u}cher, 2002 - 2015.}, year = {2015}, language = {de} } @incollection{Karlinger2006, author = {Karlinger, Peter}, title = {Werkzeugkonstruktion}, series = {: Werkzeugbau in der Kunststoffverarbeitung}, booktitle = {: Werkzeugbau in der Kunststoffverarbeitung}, publisher = {Carl Hanser Verlag}, address = {M{\"u}nchen}, publisher = {Technische Hochschule Rosenheim}, year = {2006}, language = {de} } @inproceedings{VersenHayn2014, author = {Versen, Martin and Hayn, M.}, title = {Introduction to Verification and Test Using a 4-Bit Arithmetic Logic Unit Including a Failure Module in a Xilinx XC9572XL CPLD}, series = {Proceedings of the 40th ISTFA 2014}, booktitle = {Proceedings of the 40th ISTFA 2014}, year = {2014}, language = {en} } @inproceedings{HoellthalerHagl2017, author = {H{\"o}llthaler, Julia and Hagl, Rainer}, title = {Plattformunabh{\"a}ngige modellbasierte Entwicklung von hochdynamischen Antriebsregelungen}, series = {MATLAB EXPO 2017 Deutschland, M{\"u}nchen, 27. Juni 2017}, booktitle = {MATLAB EXPO 2017 Deutschland, M{\"u}nchen, 27. Juni 2017}, year = {2017}, language = {de} } @inproceedings{StubenrauchWittmannKiermayeretal.2017, author = {Stubenrauch, Franz and Wittmann, Josef and Kiermayer, Alexander and Seliger, Norbert and Hagl, Rainer and Schmitt-Landsiedel, Doris and Kennel, Ralph}, title = {FPGA-based High Dynamic Servo Drive Control with a 200kHz Gallium Nitride Inverter}, series = {2017 19th European Conference on Power Electronics and Applications (EPE'17 ECCE Europe), Warsaw, Poland}, booktitle = {2017 19th European Conference on Power Electronics and Applications (EPE'17 ECCE Europe), Warsaw, Poland}, year = {2017}, abstract = {Increased productivity in industrial processes can be achieved by dynamic and accurate positioning of servo drives. Therefore, improvement of servo drive dynamics using latest technologies in the key components such as inverter, control system and position measuring device are investigated. Using Gallium Nitride (GaN) or Silicon Carbide (SiC) semiconductors for motor inverters enables energy efficient operation up to pulse width modulation (PWM) frequencies of 500 kHz. This allows motor filters with small component sizes. As a result, high motor efficiency, low torque ripple, high control bandwidth and almost ideal sinusoidal output voltages are achieved. Experiments on a 200 kHz Gallium Nitride inverter with sine wave motor filter show a current control loop bandwidth of 3.2 kHz and almost ideal sinusoidal phase voltages. The achieved bandwidths of the speed and position control loops are 318 Hz and 106 Hz, respectively.}, language = {en} } @article{HartmannKarlingerWuertele2015, author = {Hartmann, Markus and Karlinger, Peter and W{\"u}rtele, Martin}, title = {Optimieren durch Simulieren}, series = {Kunststoffe}, journal = {Kunststoffe}, number = {11/2015}, publisher = {Carl Hanser Verlag}, year = {2015}, language = {de} } @inproceedings{WittmannHaglKennel2017, author = {Wittmann, Josef and Hagl, Rainer and Kennel, Ralph}, title = {Hybrid Current and Acceleration Control of Servo Drives}, series = {PCIM Europe 2017 - International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, N{\"u}rnberg}, booktitle = {PCIM Europe 2017 - International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, N{\"u}rnberg}, year = {2017}, abstract = {A hybrid current and acceleration control is presented and shown to improve the load disturbance behavior of servo drives significantly without additional sensor effort. The feedback signal of the acceleration control loop is calculated from the position data of the motor encoder. Hence, position measuring errors influence this control loop and lead to speed ripple. Therefore, the presented design of the acceleration control loop considers both load sensitivity and position measuring errors.}, language = {en} } @inproceedings{WittmannHagl2016, author = {Wittmann, Josef and Hagl, Rainer}, title = {Gleichlaufschwankungen in Servoantrieben}, series = {Fortschritte in der Antriebs- und Automatisierungstechnik (FAA), Stuttgart}, booktitle = {Fortschritte in der Antriebs- und Automatisierungstechnik (FAA), Stuttgart}, year = {2016}, language = {de} } @inproceedings{WittmannHaglKennel2016, author = {Wittmann, Josef and Hagl, Rainer and Kennel, Ralph}, title = {Influence of Position Measuring Errors on Speed Ripple in Servo Drives}, series = {2016 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM, Capri, Italy}, booktitle = {2016 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM, Capri, Italy}, year = {2016}, abstract = {Position measuring devices with sinusoidal measuring signals are widely used in position-controlled servo drives in industrial automation, e.g., for machine tools or semiconductor production machines. Usually, the feedback signal for the speed or velocity controller is calculated from the measured position. Therefore, position measuring errors affect these control loops. This study presents an analytic error model that considers non-ideal sinusoidal measuring signals with basic deviations (amplitude differences, offset errors, and phase shift) as well as signal harmonics. The model was used to systematically investigate the influence of signal quality and the number of signal periods from position measuring devices on speed ripple, across a wide range of speeds. A test stand with a high-resolution reference angle measuring device was used to confirm the results.}, language = {en} } @article{WittmannHagl2016, author = {Wittmann, Josef and Hagl, Rainer}, title = {Positionsmessfehler in Servoantrieben}, series = {Antriebstechnik}, volume = {2016}, journal = {Antriebstechnik}, number = {1-2}, year = {2016}, language = {de} } @article{KarlingerZillmerZentgrafetal.2016, author = {Karlinger, Peter and Zillmer, Markus and Zentgraf, Peter and W{\"u}rtele, Martin and Grimm, G{\"u}nther}, title = {Neue Regler f{\"u}r Plastizfierungen an Spritzgießmaschinen}, series = {Zeitschrift Kunststoffe}, journal = {Zeitschrift Kunststoffe}, year = {2016}, language = {de} } @inproceedings{VersenTreichlKalteneckeretal.2018, author = {Versen, Martin and Treichl, R. and Kaltenecker, M. and El Shahawy, H. and Thomas, T. T.}, title = {Differentielle LVDS Schnittstelle f{\"u}r modellbasierte Entw{\"u}rfe mit MathWorks HDL Coder}, series = {15. AALE Konferenz zu Cyberphysischen Produktionssystemen, 2018}, booktitle = {15. AALE Konferenz zu Cyberphysischen Produktionssystemen, 2018}, publisher = {VDE-Verlag}, address = {Berlin}, isbn = {978-3-8007-4522-7}, year = {2018}, language = {de} } @article{VersenErnstGulati2017, author = {Versen, Martin and Ernst, W. and Gulati, P.}, title = {A row hammer pattern analysis of DDR2 SDRAM}, series = {Microelectronics Reliability}, volume = {76-77}, journal = {Microelectronics Reliability}, pages = {64 -- 67}, year = {2017}, abstract = {A DDR2 SDRAM test setup implemented on the Griffin III ATE test system from HILEVEL Technologies is used to analyse the row hammer bug. Row hammer pattern experiments are compared to standard retention tests. The analysis confirms that the row hammer effect is caused by a charge excitation process depending on the number of stress activation cycles. The stress has to occur in the local neighborhood of the cells under test. Shallow impurity levels support the responsible charge carrier transport process in the used DDR2 SDRAM technology}, language = {en} } @article{VersenErnstGulatietal.2015, author = {Versen, Martin and Ernst, W. and Gulati, P. and Singh, G.}, title = {Test setup for reliability studies of DDR2 SDRAM}, series = {Microelectronics Reliability}, journal = {Microelectronics Reliability}, year = {2015}, abstract = {A DDR2 DRAM test setup is developed and implemented on the Griffin III ATE test system from HILEVEL Technologies. The test system provides a raw platform for performing various mixed signal and digital tests. In order to configure patterns easily in a vector format, a software platform is developed to manage test patterns according to the user's analysis needs. As examples, retention test patterns with disabled self-refresh are applied to 2 Gbit DDR2 SDRAM of two different DRAM vendors. The devices are characterized in respect to their intrinsic leakage and data retention behavior under the influence of stress conditions such as temperature or access algorithm. The tests are automated and test data is logged for an off-line data analysis. Data is recorded before and after solder simulation steps in order to observe a retention time degradation.}, language = {en} } @misc{ZentgrafErb2009, author = {Zentgraf, Peter and Erb, S.}, title = {IMPACT OF ELECTRIC PROPULSION UNCERTAINTY ON ORBIT PREDICTION}, editor = {Zentgraf, Peter}, year = {2009}, abstract = {This paper analyses the achievable performance of the orbit prediction for a geostationary satellite using clusters of electrical propulsion (EP) thrusters for station-keeping and a star tracker based attitude control system. The challenge in the orbit prediction is that the real electrical propulsion thrust is known with limited accuracy only. In combination with thrust pointing errors, these inaccuracies can accumulate to large orbit position errors during long low thrust burn arcs. The discrepancy between real and predicted satellite position is determined in terms of probability and as a worst case scenario.}, language = {en} } @inproceedings{EbenKarlingerGehde2013, author = {Eben, J. and Karlinger, Peter and Gehde, M.}, title = {"Bitte nicht St{\"o}ren" - Analyse des St{\"o}rgr{\"o}ßeneinflusses auf Prozess und Qualit{\"a}t}, series = {23. Fachtagung TECHNOMER 2013 14./15. November 2013}, booktitle = {23. Fachtagung TECHNOMER 2013 14./15. November 2013}, year = {2013}, language = {de} } @book{KarlingerBuerkleWobbe2013, author = {Karlinger, Peter and B{\"u}rkle, and Wobbe,}, title = {Reinraumtechnik in der Kunststoffverarbeitung}, publisher = {Carl Hanser Verlag}, address = {M{\"u}nchen}, isbn = {ISBN 978-3-446-43,428-8}, publisher = {Technische Hochschule Rosenheim}, year = {2013}, language = {de} } @inproceedings{VersenBernhardtHeigletal.2012, author = {Versen, Martin and Bernhardt, and Heigl, M. and Viehhauser, P. and Zentgraf, P.}, title = {System for real-time data acquisition and processing on a hail-fighter aeroplane}, series = {Proceedings of the 5th European DSP Education and Research Conference}, booktitle = {Proceedings of the 5th European DSP Education and Research Conference}, year = {2012}, abstract = {The System HAILsens implements a device for Real-Time sensor data processing, running on a Texas Instruments Concerto M3 core. An I2C interface is used for sensor communications. Ethernet with UDP on a custom developed three layered frame organisation of sensor data serves as a link to the main system on board of an aeroplane. For backing up the acquired data, all frames are locally stored on an SD Card. To have the possibility of easily checking the current system status, an LCD module and a push-button provide a minimal user interface.}, language = {en} } @inproceedings{VersenShankarEnimidisettyetal.2011, author = {Versen, Martin and Shankar, S. and Enimidisetty, S. and Bernhardt, A. and Srinivasan, B.}, title = {Setup for Locating PV-Cell Surface Defects Through ISC Measurements}, series = {Proceedings of the 37th ISTFA 2011}, booktitle = {Proceedings of the 37th ISTFA 2011}, year = {2011}, language = {en} } @inproceedings{ZentgrafBergeChassetetal.2010, author = {Zentgraf, Peter and Berge, S. and Chasset, C. and Filippi, H. and Gottzein, E. and Guti{\´e}rrez-Ca{\~n}as, I. and Hartrampf, M. and Krauss, P. A. and Kuehl, C. and L{\"u}bke- Ossenbeck, B. and Mittnacht, M. and Montenbruck, O. and M{\"u}ller, C. and Rueda Boldo, P. and Truffi, A.}, title = {PREPARING THE GPS-EXPERIMENT FOR THE SMALL GEO MISSION}, series = {33rd ANNUAL AAS GUIDANCE AND CONTROL CONFERENCE}, booktitle = {33rd ANNUAL AAS GUIDANCE AND CONTROL CONFERENCE}, editor = {American Astronautical Society,}, year = {2010}, abstract = {This paper deals with the preparation of the Small GEO mission and the accommodation of a GPS receiver as an experiment. The expected benefits of using the GPS receiver for Small GEO are explained. The feasibility of using GPS for position determination is investigated by simulation using a MosaicGNSS receiver, which was stimulated by a Spirent RF signal generator. A procedure, how to evaluate flight data on ground is outlined. Success criteria of the experiment and the minimal size of the downlink stream required and reserved for the receiver TM are presented.}, language = {en} } @article{KarlingerHartmannBarthetal.2016, author = {Karlinger, Peter and Hartmann, Markus and Barth, Simon and Schemme, Michael and Michanickl, Andreas}, title = {Holzoberfl{\"a}chen an Kunststoffteilen}, series = {Zeitschrift Kunststoffe}, journal = {Zeitschrift Kunststoffe}, year = {2016}, language = {de} } @article{KarlingerBarthHartmannetal.2016, author = {Karlinger, Peter and Barth, Simon and Hartmann, Markus and Michanickl, Andreas and Schemme, Michael}, title = {Einen Bund eingehen}, series = {Bauen mit Holz}, journal = {Bauen mit Holz}, year = {2016}, language = {de} }