@article{WiedlKarlingerSchemmeetal.2022, author = {Wiedl, Sebastian and Karlinger, Peter and Schemme, Michael and List, Manuela and Ruckd{\"a}schel, Holger}, title = {Comparison of Melting Processes for WPC and the Resulting Differences in Thermal Damage, Emissions and Mechanics}, series = {Materials}, volume = {15}, journal = {Materials}, number = {9}, publisher = {MDPI}, address = {Basel}, doi = {10.3390/ma15093393}, pages = {13}, year = {2022}, abstract = {The necessity for resource-efficient manufacturing technologies requires new developments within the field of plastic processing. Lightweight design using wood fibers as sustainable reinforcement for thermoplastics might be one solution. The processing of wood fibers requires special attention to the applied thermal load. Even at low processing temperatures, the influence of the dwell time, temperature and shear force is critical to ensure the structural integrity of fibers. Therefore, this article compares different compounding rates for polypropylene with wood fibers and highlights their effects on the olfactory, visual and mechanical properties of the injection-molded part. The study compares one-step processing, using an injection-molding compounder (IMC), with two-step processing, using a twin-scew-extruder (TSE), a heating/cooling mixer (HCM) and an internal mixer (IM) with subsequent injection molding. Although the highest fiber length was achieved by using the IMC, the best mechanical properties were achieved by the HCM and IM. The measured oxidation induction time and volatile organic compound content indicate that the lowest amount of thermal damage occurred when using the HCM and IM. The advantage of one-time melting was evened out by the dwell time. The reinforcement of thermoplastics by wood fibers depends more strongly on the structural integrity of the fibers compared to their length and homogeneity}, language = {en} } @inproceedings{BleyHommel2022, author = {Bley, Sandra and Hommel, Mandy}, title = {Ingenieurp{\"a}dagogik in Bayern- ein Portrait der Standorte}, series = {7. Technikdidaktik-Symposium des Journals of Technical Education (JOTED 2022)}, booktitle = {7. Technikdidaktik-Symposium des Journals of Technical Education (JOTED 2022)}, year = {2022}, language = {de} } @inproceedings{HeindlBleySchuetz2022, author = {Heindl, Johanna and Bley, Sandra and Sch{\"u}tz, Markus}, title = {Freie fachspezifische digitale Lernmedien f{\"u}r die Bau- /Holztechnik (OER) - Studierende konzeptionieren, produzieren und teilen Gamifications und Erkl{\"a}rvideos.}, series = {7. Technikdidaktik-Symposium des Journals of Technical Education}, booktitle = {7. Technikdidaktik-Symposium des Journals of Technical Education}, year = {2022}, language = {de} } @inproceedings{Boehm2022, author = {B{\"o}hm, Stefan-Andreas}, title = {Adaptable Machining Process Identification based on Expert Knowledge and Artificial Intelligence}, series = {Organic Computing Doctoral Dissertation Colloquium 2021}, booktitle = {Organic Computing Doctoral Dissertation Colloquium 2021}, editor = {Tomforde, Sven and Krupitzer, Christian}, publisher = {kassel university press}, address = {Kassel}, doi = {10.17170/kobra-202202215780}, pages = {1 -- 14}, year = {2022}, abstract = {The demand for product individuality increased enormously in recent years and thus affects directly manufacturers and their employees. Due to the increasing demand for batch-size-one production, every product needs specific manufacturing processes. Usually, employees determine these manufacturing steps with provided product data. This research proposal aims to contribute to the extraction of machining processes from product data and their assignment to suitable machinery. We plan to develop an organic computing system based on artificial intelligence methods to solve these problems by including customer-specific designs and employee expertise. The overall objective is to support employees in manufacturing facilities by simplifying the manufacturer and customer interaction.}, language = {en} } @inproceedings{Rabold2022, author = {Rabold, Andreas}, title = {Schallschutz und Schalld{\"a}mmung im Holzbau - Vorplanung und Nachweisverfahren}, series = {Fortschritte der Akustik - DAGA}, booktitle = {Fortschritte der Akustik - DAGA}, organization = {Deutsche Gesellschaft f{\"u}r Akustik e.V.}, year = {2022}, language = {de} } @inproceedings{RaboldMeckingHuber2022, author = {Rabold, Andreas and Mecking, Simon and Huber, Anton}, title = {Schalltechnische Aspekte bei NaWaRo-D{\"a}mmstoffen: Details aus dem Inneren}, series = {Bauphysik \& Geb{\"a}udetechnik}, booktitle = {Bauphysik \& Geb{\"a}udetechnik}, organization = {Forum Holzbau}, isbn = {978-3-906226-41-5}, year = {2022}, language = {de} } @inproceedings{Schanda2022, author = {Schanda, Ulrich}, title = {Schallschutzprognose mit Methoden der KI - erste Gedanken}, series = {Fortschritte der Akustik - DAGA}, booktitle = {Fortschritte der Akustik - DAGA}, organization = {Deutsche Gesellschaft f{\"u}r Akustik e.V.}, year = {2022}, language = {de} } @inproceedings{SchoepferKruseMayretal.2022, author = {Sch{\"o}pfer, Fabian and Kruse, Tobias and Mayr, Andreas R. and Schanda, Ulrich}, title = {Erfahrungen mit der DIN EN 15657:2017-10 und dem Empfangsplattenpr{\"u}fstand an der TH Rosenheim}, series = {Fortschritte der Akustik - DAGA}, booktitle = {Fortschritte der Akustik - DAGA}, organization = {Deutsche Gesellschaft f{\"u}r Akustik e.V.}, year = {2022}, language = {de} } @inproceedings{SchoepferKruseWeinzierletal.2022, author = {Sch{\"o}pfer, Fabian and Kruse, Tobias and Weinzierl, Johanna and Mayr, Andreas R. and Schanda, Ulrich}, title = {Experiences with source characterization methods within and beyond the scope of EN 15657}, series = {Proceedings of Inter-Noise 2022}, booktitle = {Proceedings of Inter-Noise 2022}, year = {2022}, language = {en} } @inproceedings{WeberSchandaSchoepfer2022, author = {Weber, Katharina and Schanda, Ulrich and Sch{\"o}pfer, Fabian}, title = {Lautheit als Messgr{\"o}ße f{\"u}r die Trittschall{\"u}bertragung}, series = {Fortschritte der Akustik - DAGA}, booktitle = {Fortschritte der Akustik - DAGA}, organization = {Deutsche Gesellschaft f{\"u}r Akustik e.V.}, year = {2022}, language = {de} } @inproceedings{WeinzierlKruseMayretal.2022, author = {Weinzierl, Johanna and Kruse, Tobias and Mayr, Andreas R. and Sch{\"o}pfer, Fabian and Schanda, Ulrich}, title = {Leistungsvergleich geb{\"a}ude{\"a}hnlicher Strukturen bei in-plane und out-of-plane Anregung}, series = {Fortschritte der Akustik - DAGA}, booktitle = {Fortschritte der Akustik - DAGA}, organization = {Deutsche Gesellschaft f{\"u}r Akustik e.V.}, year = {2022}, language = {de} } @inproceedings{BayerSchoepferMayretal.2022, author = {Bayer, Jeremias and Sch{\"o}pfer, Fabian and Mayr, Andreas R. and Schanda, Ulrich}, title = {Prognoseverfahren f{\"u}r Installationsger{\"a}usche im Holzbau}, series = {Fortschritte der Akustik - DAGA}, booktitle = {Fortschritte der Akustik - DAGA}, organization = {Deutsche Gesellschaft f{\"u}r Akustik e.V.}, year = {2022}, language = {de} } @inproceedings{ChateauvieuxHellwig2022, author = {Ch{\^a}teauvieux-Hellwig, Camille}, title = {Schallschutzplanung und BIM im Holzbau: ein Zwischenstand}, series = {Bauphysik \& Geb{\"a}udetechnik}, booktitle = {Bauphysik \& Geb{\"a}udetechnik}, organization = {Forum Holzbau}, isbn = {978-3-906226-41-5}, year = {2022}, language = {de} } @inproceedings{MeckingMutterRabold2022, author = {Mecking, Simon and Mutter, Tobias and Rabold, Andreas}, title = {Verbesserung des Schalld{\"a}mm-Maßes durch Vorsatzschalen im Holzmassivbau}, series = {Bauphysik \& Geb{\"a}udetechnik}, booktitle = {Bauphysik \& Geb{\"a}udetechnik}, organization = {Forum Holzbau}, isbn = {978-3-906226-41-5}, year = {2022}, language = {de} } @inproceedings{PfattheicherSchoepferSchandaetal.2022, author = {Pfattheicher, Silas and Sch{\"o}pfer, Fabian and Schanda, Ulrich and Rabold, Andreas}, title = {Untersuchung des Einflusses von Vorsatzschalen vor Massivholzelementen auf das Stoßstellend{\"a}mm-Maß}, series = {Fortschritte der Akustik - DAGA}, booktitle = {Fortschritte der Akustik - DAGA}, organization = {Deutsche Gesellschaft f{\"u}r Akustik e.V.}, year = {2022}, language = {de} } @inproceedings{JosifovskiMalmirKlarmannetal.2022, author = {Josifovski, Josip and Malmir, Mohammadhossein and Klarmann, Noah and Žagar, Bare Luka and Navarro-Guerrero, Nicol{\´a}s and Knoll, Alois}, title = {Analysis of Randomization Effects on Sim2Real Transfer in Reinforcement Learning for Robotic Manipulation Tasks}, series = {2022 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), Kyoto, Japan}, booktitle = {2022 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), Kyoto, Japan}, doi = {10.1109/IROS47612.2022.9981951}, pages = {10193 -- 10200}, year = {2022}, abstract = {Randomization is currently a widely used approach in Sim2Real transfer for data-driven learning algorithms in robotics. Still, most Sim2Real studies report results for a specific randomization technique and often on a highly customized robotic system, making it difficult to evaluate different randomization approaches systematically. To address this problem, we define an easy-to-reproduce experimental setup for a robotic reach-and-balance manipulator task, which can serve as a benchmark for comparison. We compare four randomization strategies with three randomized parameters both in simulation and on a real robot. Our results show that more randomization helps in Sim2Real transfer, yet it can also harm the ability of the algorithm to find a good policy in simulation. Fully randomized simulations and fine-tuning show differentiated results and translate better to the real robot than the other approaches tested}, language = {en} } @inproceedings{BrunnerHagl2022, author = {Brunner, Christian and Hagl, Rainer}, title = {High accuracy torque measurement with position measuring devices}, series = {2022 IEEE Sensors Applications Symposium (SAS)}, booktitle = {2022 IEEE Sensors Applications Symposium (SAS)}, doi = {10.1109/SAS54819.2022.9881385}, pages = {1 -- 6}, year = {2022}, abstract = {The measurement of torque is often based on a measured deformation, which results from a torsional load acting on the sensor. Strain gauges are standard devices for quantifying the deformation. In this paper, a device determining the torque based on a measured relative distortion of a torsional flexible body is presented. Two position measuring devices are used to determine the relative distortion. The design criteria for the flexible body of the sensor are discussed. A prototype using the proposed measurement principle was built up and analyzed regarding the achievable accuracy of the torque measurement at pure torsional loads and also under disturbing loads. The results show a high accuracy in the torque measurement with a linearity error in the range of 0.11\% of the maximum torque. The influence of disturbing loads on the torque measurement can be neglected, which is an advantage compared to other torque sensors.}, language = {en} } @misc{WeeOttCheah2022, author = {Wee, K.E. and Ott, Holly C. and Cheah, S.M.}, title = {ProGlove Smart Gloves: Let's Save Four Million Dollars a Day!}, publisher = {Harvard Business Publishing}, pages = {11}, year = {2022}, language = {en} } @misc{BoehmOestreichHodeketal.2022, author = {B{\"o}hm, Janna and Oestreich, Claudia and Hodek, Claudia and Ittlinger, Sabine}, title = {Physiotherapeutische Bewegungsbef{\"a}higung im h{\"a}uslichen Umfeld.}, year = {2022}, language = {de} } @misc{BoehmOestreichHodeketal.2022, author = {B{\"o}hm, Janna and Oestreich, Claudia and Hodek, Claudia and Ittlinger, Sabine}, title = {Physiotherapeutische Bewegungsbef{\"a}higung im h{\"a}uslichen Umfeld. Zwischenergebnisse eines Teilprojektes von DeinHaus4.0 Oberbayern.}, year = {2022}, language = {de} }