@inproceedings{SchoepferHopkinsMayretal.2017, author = {Sch{\"o}pfer, Fabian and Hopkins, Carl and Mayr, Andreas R. and Schanda, Ulrich}, title = {Prediction of noise from machinery in timber-frame buildings using transmission functions}, series = {Proceedings of ICSV24}, booktitle = {Proceedings of ICSV24}, isbn = {978-1-906913-27-4}, year = {2017}, language = {en} } @inproceedings{SchoepferHopkinsMayretal.2017, author = {Sch{\"o}pfer, Fabian and Hopkins, Carl and Mayr, Andreas R. and Schanda, Ulrich}, title = {Ans{\"a}tze zur Prognose des Installationspegels im Holz-Leichtbau}, series = {Fortschritte der Akustik - DAGA}, booktitle = {Fortschritte der Akustik - DAGA}, organization = {Deutsche Gesellschaft f{\"u}r Akustik e.V.}, isbn = {978-3-939296-12-6}, year = {2017}, language = {de} } @inproceedings{Schoepfer2017, author = {Sch{\"o}pfer, Fabian}, title = {K{\"o}rperschall{\"u}bertragung im Holzbau: {\"U}bertragungsfunktionen}, series = {8. HolzBauSpezial}, booktitle = {8. HolzBauSpezial}, organization = {Forum Holzbau}, year = {2017}, language = {de} } @techreport{SchandaMayrSchoepfer2017, author = {Schanda, Ulrich and Mayr, Andreas R. and Sch{\"o}pfer, Fabian}, title = {FHprofUnt 2012: Nachhaltiger Schallschutz geb{\"a}udetechnischer Anlagen in energetisch optimierten Geb{\"a}uden: Teilprojekt 2: Schlussbericht}, year = {2017}, language = {de} } @inproceedings{HummelKarlingerSchemme2017, author = {Hummel, Sabine and Karlinger, Peter and Schemme, Michael}, title = {Haftungsuntersuchungen f{\"u}r Leichtbauanwendungen}, series = {Technomer 2017}, booktitle = {Technomer 2017}, publisher = {Technische Universit{\"a}t Chemnitz}, address = {Chemnitz}, isbn = {978-3-939382-13-3}, pages = {1 -- 11}, year = {2017}, abstract = {Die Verst{\"a}rkung von Spritzgussteilen mit Faserhalbzeugen gewinnt immer mehr an Bedeutung. F{\"u}r die Einsatztauglichkeit derartiger Bauteile ist die Verbundhaftung zwischen den angespritzten Strukturen und den Faserhalbzeugen essentiell. Der Vortrag befasst sich mit den {\"a}ußeren und prozesstechnischen Einfl{\"u}ssen zu Erh{\"o}hung der Verbundhaftung auf Faserhalbzeugen. Zudem wird ein Einblick in die Pr{\"u}f und Anlagentechnik in diesem Bereich gegeben.}, language = {de} } @article{LienlandZengMayrocketal.2017, author = {Lienland, Bernhard and Zeng, Li and Mayrock, Michael and Kellner, Florian}, title = {Operations Research im Controlling}, series = {Controlling: Zeitschrift f{\"u}r erfolgsorientierte Unternehmenssteuerung}, volume = {29}, journal = {Controlling: Zeitschrift f{\"u}r erfolgsorientierte Unternehmenssteuerung}, number = {2}, doi = {10.15358/0935-0381-2017-2}, pages = {55 -- 57}, year = {2017}, language = {de} } @article{KellnerOttoBrabaender2017, author = {Kellner, Florian and Otto, Andreas and Brab{\"a}nder, Christian}, title = {Bringing infrastructure into pricing in road freight transportation ? A measuring concept based on navigation service data}, series = {Transportation Research Procedia}, volume = {25}, journal = {Transportation Research Procedia}, doi = {10.1016/j.trpro.2017.05.458}, pages = {794 -- 805}, year = {2017}, abstract = {Differences in road infrastructure, such as capacity, congestion, speed limits affect the productivity and the costs of short-distance freight operations. This article introduces a novel methodology that is based on navigation service data to measure the effects in terms of cost per kilometer using navigation and shipment data. The methodology is applied to five terminals of a forwarding cooperation and has been able to document significant differences in cost per kilometer across the terminals. The research results can be used by logistics service providers to better understand how productivity and thus profitability is affected by the quality of the transportation infrastructure in the particular areas they operate in. Furthermore, the insights will help these companies for better, i.e. cost-based pricing and will allow to document why and where prices need to be adapted.}, language = {en} } @incollection{KellnerLukesch2017, author = {Kellner, Florian and Lukesch, Maximilian}, title = {Logistik nachhaltig gestalten: Die Bestimmung von CO2-Emissionen im Straßeng{\"u}tertransport}, series = {Praxishandbuch Logistik: Erfolgreiche Logistik in Industrie, Handel und Dienstleistungsunternehmen}, booktitle = {Praxishandbuch Logistik: Erfolgreiche Logistik in Industrie, Handel und Dienstleistungsunternehmen}, editor = {Pradel, Uwe-H. and S{\"u}ssenguth, Wolfram and Piontek, Jochem and Schwolgin, Armin F.}, publisher = {Fachverlag Deutscher Wirtschaftsdienst}, address = {K{\"o}ln}, year = {2017}, language = {de} } @article{IglKellner2017, author = {Igl, Johannes and Kellner, Florian}, title = {Exploring greenhouse gas reduction opportunities for retailers in Fast Moving Consumer Goods distribution networks}, series = {Transportation Research Part D: Transport and Environment}, volume = {50}, journal = {Transportation Research Part D: Transport and Environment}, doi = {10.1016/j.trd.2016.10.008}, pages = {55 -- 69}, year = {2017}, abstract = {This research explores logistics-related leverages in the responsibility of retailers for improving the environmental performance of a Fast Moving Consumer Goods (FMCG) distribution network. We examine opportunities for modifying the network carbon footprint by changing network design variables. To do so, a quantitative distribution network model is established, and 150 scenarios are calculated by modifying real-world shipment data from an existing multinational FMCG manufacturer. Four distribution variables are identified for a many-to-many and a hub-and-spoke network structure. Two variables affect the distribution network and two interfere in the shipment structure by manipulating weight and/or the delivery date. This research sheds light on the extent of the changes in greenhouse gas (GHG) emissions of the distribution network that result from modifications in the logistics variables. The greatest effect on the quantity of GHG emissions can be observed when an anticipation horizon for orders is introduced. When shipments are consolidated and delivered only weekly or biweekly from the manufacturer to the retailers, GHG emissions drop significantly. Another opportunity for retailers to cut down GHG emissions is based on the concept of minimum order quantities where shipments to a retailer location are bundled until a certain weight is reached. Additionally, total GHG emissions of distribution may be reduced by raising the tonnage limit, thereby triggering direct shipments between the manufacturer's facilities and the retailer locations, or by raising the tonnage limit, which triggers direct shipments in the logistics service provider network. The extent of GHG reduction is assessed for all investigated variables.}, language = {en} } @inproceedings{Kellner2017, author = {Kellner, Florian}, title = {Supplier portfolio optimization}, series = {Ipsera Conference Hungary 2017}, booktitle = {Ipsera Conference Hungary 2017}, year = {2017}, language = {en} } @inproceedings{Kellner2017, author = {Kellner, Florian}, title = {Multi-objective supplier portfolio configuration under supply risk and sustainability considerations}, series = {International Conference on Operations Research (OR2017)}, booktitle = {International Conference on Operations Research (OR2017)}, year = {2017}, language = {en} } @inproceedings{Kellner2017, author = {Kellner, Florian}, title = {Visual decision support for the multi-objective supplier selection problem}, series = {International Conference on Multiple Objective Programming and Goal Programming (MOPGP)}, booktitle = {International Conference on Multiple Objective Programming and Goal Programming (MOPGP)}, year = {2017}, language = {en} } @article{KellnerChristinaGoerkLienland2017, author = {Kellner, Florian and Christina Goerk, Anna and Lienland, Bernhard}, title = {Mit CO₂-Kennzahlen die {\"O}kobilanz verbessern}, series = {Controlling \& Management Review}, volume = {61}, journal = {Controlling \& Management Review}, number = {9}, doi = {10.1007/s12176-017-0118-z}, pages = {58 -- 64}, year = {2017}, language = {de} } @misc{MuscatVoitHefenbrock2017, author = {Muscat, Dirk and Voit, Johann and Hefenbrock, Sophia}, title = {Patentschrift DE102015014912B4}, year = {2017}, abstract = {Beschichtung f{\"u}r ein medizinisches In­strument, das nach seinem Einf{\"u}hren in einen menschlichen oder tierischen K{\"o}rper mit dessen K{\"o}rperfl{\"u}ssigkeit in Kon­takt gelangt, umfassend eine Materialzusammensetzung, die wenigstens ein Phosphorylcholin umfassendes Polymer enth{\"a}lt, dadurch gekennzeichnet, dass die Materialzusam­mensetzung f{\"u}r ein medizinisches Instrument, das auf sei­ner Oberfl{\"a}che Polyurethan enth{\"a}lt oder das daraus g{\"a}nzlich besteht, eine auf das medizinische Instrument aufbringba­re Haftungsvernetzungsschicht aus einem chemischen Haft­vermittler und einem mit diesem vernetzten Alkohol, min­destens einem zweiwertigen Alkohol mit zwei prim{\"a}ren OH­Gruppen, und das wenigstens eine Phosphorylcholin um­fassende Polymer enth{\"a}lt, welches auf der Haftungsvernet­zungsschicht als gesonderte Schicht aufgebracht sowie auf dieser und gegebenenfalls mit dieser vernetzt ist.}, language = {de} } @incollection{BaeumlAslanAbel2017, author = {B{\"a}uml, Karl-Heinz T. and Aslan, Alp and Abel, Magdalena}, title = {Chapter Five - The Two Faces of Selective Memory Retrieval—Cognitive, Developmental, and Social Processes}, series = {Psychology of Learning and Motivation}, booktitle = {Psychology of Learning and Motivation}, editor = {Ross, Brian H.}, publisher = {Academic Press}, address = {London, Oxford, Boston, New York, San Diego}, publisher = {Technische Hochschule Rosenheim}, pages = {167 -- 209}, year = {2017}, abstract = {Numerous studies from the past five decades have shown that selective retrieval of some studied items can impair recall of other items. This chapter reviews more recent work, in which it is demonstrated that selective memory retrieval has two faces and that it can both impair and improve recall of other items. In this recent work, participants' access to study context during selective retrieval was experimentally manipulated and it was examined whether such manipulation influences the effects of selective retrieval. Access to study context was manipulated using listwise directed forgetting, context-dependent forgetting and time-dependent forgetting. The results consistently showed that selective retrieval impairs recall of other memories if access to study context during retrieval is largely maintained, but that selective retrieval can improve recall if study context access is impaired. The findings are explained by a two-factor account, which claims that, in general, selective retrieval does not only trigger inhibition and blocking but also triggers context reactivation processes. The proposal is that primarily inhibition and blocking operate when study context access during selective retrieval is largely maintained, whereas primarily context reactivation processes operate when study context access is impaired. Current findings on the two faces of selective retrieval are well consistent with this theoretical view.}, language = {en} } @article{Frank2017, author = {Frank, Ludwig}, title = {The Binomial and Negative Binomial Distribution in Discrete Time Markov Chains}, series = {Markov Processes And Related Fields}, volume = {23}, journal = {Markov Processes And Related Fields}, number = {3}, pages = {377 -- 400}, year = {2017}, abstract = {The classical results of the binomial and negative binomial probability distribution are generalized by means of homogeneous Discrete Time Markov Chains to series of stochastically independent random trials. These have not only two possible outcomes but two groups of them -- different kinds of successes and failures with occurrence probabilities depending on the outcome of the previous trial. This generalization allows a uniform view of occupation time, first passage time and recurrence time. Our results are consequently derived and presented in matrix form, the probabilities as well as the moments. They can be applied to all Discrete Time Markov Chains, especially in computer capacity planning, performability and economics.}, language = {en} } @article{MaderebnerGerhaherFlachetal.2017, author = {Maderebner, R. and Gerhaher, U. and Flach, M. and Hirschm{\"u}ller, Sebastian}, title = {Load carrying capacity of screwed CLT wall-ceiling joints with and without elastic supports}, series = {BAUINGENIEUR}, volume = {92}, journal = {BAUINGENIEUR}, pages = {495 -- 502}, year = {2017}, abstract = {Due to the application of elastic interlayers for acoustic decoupling, wood screws to connect timber elements are stressed beneath axial and shear loads additionally by a bending moment. The equations to calculate the load carrying capacity of wood-wood-connections according to the Eurocode 5, lose their validity in case of application of interlayers with low shear resistance. Furthermore, the increasing flexibilities of the joints should be considered for a realistic static modelling. Aim of the present work is to analyze the mechanical load bearing characteristics of wall-ceiling-connections of cross laminated timber with and without elastic interlayers. On the basis of experiments as well as analytical approaches, the load-deformation-behavior is discussed and contrasted to the current standards.}, language = {en} } @article{FilippoupolitisHopkinsVoeltletal.2017, author = {Filippoupolitis, M. and Hopkins, C. and V{\"o}ltl, R. and Schanda, Ulrich and Mahn, J. and Krajči, L.}, title = {Structural dynamics of a dowelled-joist timber floor in the low-frequency range modelled using finite element simulation}, series = {Engineering Structures}, volume = {148}, journal = {Engineering Structures}, pages = {602 -- 620}, year = {2017}, abstract = {This paper concerns the development and validation of Finite Element Methods (FEM) to simulate the dynamic response of a dowelled-joist timber floor. This is a solid floor comprised of timber joists connected using timber dowels with individual assemblies connected using inclined metal screws. The focus is on the structural dynamics in the low-frequency range up to 200 Hz which is the relevant range for impact sound insulation and vibration serviceability. Dowel connections between the joists that formed each assembly were modelled using either rigid or spring connectors in the FEM models. The validation against experimental modal analysis showed that both approaches were valid in terms of the eigenfrequencies, Modal Assurance Criterion (MAC) and the spatial-average velocity with point excitation. Whilst the FEM model with spring connectors had a higher number of correlated modes in the MAC analysis, this required removal of many spurious modes before predicting the response. The validated models were used to demonstrate the potential in predicting assessment parameters for vibration serviceability that are contained in EN 1995-1-1 (Eurocode 5). This predictive approach to the evaluation of vibration serviceability has the advantage in that it can be used for non-standard timber floors with non-standard boundary conditions or floor plans.}, language = {en} } @inproceedings{StubenrauchSeligerSchmittLandsiedel2017, author = {Stubenrauch, Franz and Seliger, Norbert and Schmitt-Landsiedel, Doris}, title = {Design and Performance of a 200 kHz GaN Motor Inverter with Sine Wave Filter}, series = {PCIM Europe 2017 - International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, N{\"u}rnberg}, booktitle = {PCIM Europe 2017 - International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, N{\"u}rnberg}, pages = {9}, year = {2017}, abstract = {Gallium Nitride (GaN) semiconductor devices are promised to be a good alternative to Silicon (Si) semiconductors in future motor inverters for variable frequency drives (VFDs). They combine low on state resistance and low switching losses with a high blocking voltage capability. Compared to actual inverters based on insulated gate bipolar transistors (IGBTs) the pulse width modulation (PWM) frequency for efficient operation can be increased by a factor of 5 to 10, extending the PWM frequency range up to 500 kHz. This allows the use of motor filters with small component size. As a result, high motor efficiency, low torque ripple, high control bandwidth and nearly ideal sinusoidal output voltages are achieved. Therefore this inverters can be used for high speed spindle motors and dynamic servo drives. This paper focus on the design of a hybrid sine wave filter consisting of an analog and a digital part. The filter is optimized to achieve low power loss and high current control bandwidth. A 3-phase GaN motor inverter operating at 200 kHz PWM frequency at 400 V DC-link voltage verifies the system design.}, language = {en} } @inproceedings{SeligerStubenrauchBrendeletal.2017, author = {Seliger, Norbert and Stubenrauch, Franz and Brendel, Christian and Schmitt-Landsiedel, Doris}, title = {Impact of Circuit Carrier Technologies on MHz-switching of GaN Half-Bridge Circuits}, series = {PCIM Europe 2017 - International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy, N{\"u}rnberg}, booktitle = {PCIM Europe 2017 - International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy, N{\"u}rnberg}, pages = {1407 -- 1415}, year = {2017}, abstract = {Increasing the switching frequency has been one of the most beneficial advancements in modern power electronics. This trend has been enabled by progress in power semiconductors resulting in increased power densities, efficiencies and control dynamics. The aim of this study is to analyze the influence of three different circuit carrier technologies on switching power loss of 650 V hardswitching GaN devices. Limitations and solutions for half-bridge circuits operating at MHz-switching are investigated by modeling and experiments on a prototype.}, language = {en} } @inproceedings{Schemme2017, author = {Schemme, Michael}, title = {Faserverbundkunststoffe Kompakt - Der Einstieg in die Technologie der FVK}, series = {FVK Kompakt - Grundlagen Faserverbundkunststoffe, Frankfurt}, booktitle = {FVK Kompakt - Grundlagen Faserverbundkunststoffe, Frankfurt}, year = {2017}, language = {de} } @inproceedings{BuerkleDittelKarlinger2017, author = {B{\"u}rkle, Erwin and Dittel, Gernod and Karlinger, Peter}, title = {Einf{\"u}hrung und Tagungsleitung}, series = {15. Benediktbeurer Reinraumtage}, booktitle = {15. Benediktbeurer Reinraumtage}, address = {Benediktbeuern}, year = {2017}, language = {de} } @techreport{AuerBenekenBrummeretal.2017, author = {Auer, Veronika and Beneken, Gerd and Brummer, Benjamin and Ch{\^a}teauvieux-Hellwig, Camille and Engler, Benjamin and Gilly, Alexander and Hagl, Rainer and Hummel, Felix and Hummel, Sabine and Karlinger, Peter and Knorr, Ludwig and K{\"o}ster, Heinrich and Kucich, Martin and Mecking, Simon and Rabold, Andreas and Sandor, Viktor and Schalk, Daniel and Schanda, Ulrich and Schemme, Michael and Schiffner, Ivonne and Schmidt, Jochen and Schugmann, Reinhard and Seidlmeier, Heinrich and Sigg, Ferdinand and Stauss, Kilian and Sussmann, Monika and Wellisch, Ulrich and Wenninger, Marc and Wittmann, Josef and Zscheile, Matthias}, title = {Jahresbericht 2016, Forschung - Entwicklung - Innovation}, organization = {Hochschule Rosenheim}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:861-opus4-12282}, pages = {68}, year = {2017}, abstract = {Mit dem j{\"a}hrlich erscheinenden Forschungsbericht m{\"o}chte die Hochschule Rosenheim einen Einblick in ihre vielf{\"a}ltigen Projekte und Aktivit{\"a}ten der angewandten Forschung und Entwicklung geben. Im Jahresbericht 2016 wird {\"u}ber Vorhaben im Jahr 2016 berichtet.}, language = {de} } @incollection{SchutterSchwedaMoeller2017, author = {Schutter, Sabina and Schweda-M{\"o}ller, Anna}, title = {Wo Risiken zusammentreffen: Bildungsbenachteiligung in Einelternfamilien}, series = {Bildung und Ungleichheit in Deutschland}, booktitle = {Bildung und Ungleichheit in Deutschland}, editor = {Baader, Meike Sophia and Freytag, Tatjana}, publisher = {Springer VS}, address = {Wiesbaden}, isbn = {978-3-658-14999-4}, publisher = {Technische Hochschule Rosenheim}, pages = {139 -- 154}, year = {2017}, language = {de} } @techreport{SpindlerWambsganssKagerletal.2017, author = {Spindler, Uli and Wambsganß, Mathias and Kagerl, Andreas and Zauner, Johannes and Schakib-Ekbatan, Karin}, title = {Abschlussbericht: Monitoring eines Niedrigst-Energie-Hotels in der Sanierung - Teilvorhaben: Messung und wissenschaftliche Analyse}, year = {2017}, abstract = {Im vom BMWi gef{\"o}rderten Forschungsprojekt Niedrigst-Energie-Hotel wurde ein Bestandsgeb{\"a}ude mithilfe eines umfassenden Sanierungskonzeptes zu einem energiesparenden Nur-Strom-Geb{\"a}ude entwickelt. Eine h{\"o}chst w{\"a}rmeged{\"a}mmte H{\"u}lle, komplett neue Anlagentechnik und intelligente Verkn{\"u}pfung der Anlagenteile versprechen niedrigen Energiebedarf bei gleichzeitig hohem Komfort. Doch mit steigender Komplexit{\"a}t der Anlagen steigt auch das Risiko, dass Bestandteile nicht optimal zusammenarbeiten oder sich sogar gegenseitig negativ beeinflussen. Beim energetischen Monitoring werden diese Anlagen und ihre Bestandteile {\"u}berwacht und deren Energiestr{\"o}me gemessen. Dieses Wissen erlaubt schließlich die detaillierte Bewertung des innovativen Energiekonzepts in der Anwendung und in gewissem Umfang auch die Optimierung der Anlagen. Zur Auswertung der umfangreichen Datens{\"a}tze wird das am Karlsruher Institut f{\"u}r Technologie (Fachgebiet Bauphysik \& Technischer Ausbau) entwickelte Werkzeug MoniSoft verwendet. Durch die plattformunabh{\"a}ngige Software werden das Monitoring und die Betriebsanalyse vereinfacht. Seit 2013 wird die Software an der Hochschule Rosenheim maßgeblich mit weiterentwickelt. Projektziele - Durch das energetische Monitoring k{\"o}nnen folgende Ziele erreicht werden: Beurteilung des Betriebs der komplexen Geb{\"a}udetechnik unter realen Bedingungen, Vergleich der Messergebnisse mit den Erwartungen der Planer, Erarbeitung von Optimierungsm{\"o}glichkeiten in der Geb{\"a}udetechnik}, language = {de} } @inproceedings{ZellerHoefigSchwinn2017, author = {Zeller, Marc and H{\"o}fig, Kai and Schwinn, Jean-Pascal}, title = {ArChes—Automatic generation of component fault trees from continuous function charts}, series = {2017 IEEE 15th International Conference on Industrial Informatics (INDIN), July 2017, Emden, Germany.}, booktitle = {2017 IEEE 15th International Conference on Industrial Informatics (INDIN), July 2017, Emden, Germany.}, year = {2017}, abstract = {The growing size and complexity of software in embedded systems poses new challenges to the safety assessment of embedded control systems. In industrial practice, the control software is mostly treated as a black box during the system's safety analysis. The appropriate representation of the failure propagation of the software is a pressing need in order to increase the accuracy of safety analyses. However, it also increase the effort for creating and maintaining the safety analysis models (such as fault trees) significantly. In this work, we present a method to automatically generate Component Fault Trees from Continuous Function Charts. This method aims at generating the failure propagation model of the detailed software specification. Hence, control software can be included into safety analyses without additional manual effort required to construct the safety analysis models of the software. Moreover, safety analyses created during early system specification phases can be verified by comparing it with the automatically generated one in the detailed specification phased.}, language = {en} } @inproceedings{MoehrleBizikZelleretal.2017, author = {M{\"o}hrle, Felix and Bizik, Kai and Zeller, Marc and H{\"o}fig, Kai and Rothfelder, Martin and Liggesmeyer, Peter}, title = {A Formal Approach for Automating Compositional Safety Analysis Using Flow Type Annotations In Component Fault Trees}, series = {Proceedings of the 27th European Safety and Reliability Conference (ESREL): Safety and Reliability - Theory and Applications., Portorož, Slovenia: Taylor \& Francis (CRC Press).}, booktitle = {Proceedings of the 27th European Safety and Reliability Conference (ESREL): Safety and Reliability - Theory and Applications., Portorož, Slovenia: Taylor \& Francis (CRC Press).}, year = {2017}, abstract = {Safety assurance is a major challenge in the design of modern embedded systems that has become increasingly difficult in recent years. Growing system sizes and the rise of Cyber-Physical systems confront safety engineers with large sets of configurations to be analyzed. Current approaches are usually carried out at design time and do not address the need for automated assessments in the field. With Component Fault Trees (CFTs) there exists a component-based methodology that enables an efficient modular composition of safety artifacts. The combined model is a system-level CFT that can be analyzed by means of popular Fault Tree Analysis techniques that are widely accepted in the industry. However, when composing models, their interfacing elements must be connected manually which impedes the automation of the procedure. In this work, we introduce the notion of flow types that represent a particular kind of component interaction and define a taxonomy of related failure behavior. By annotating CFTs with types, a machine-readable vocabulary is provided that allows for an automated interconnection of their interfaces. This way, the automatic composition of models according to system architecture is enabled, allowing for automated safety assessments on system-level. We demonstrate the feasibility of our approach using an example ethylene vaporization unit.}, language = {en} } @book{LaskKriechbaum2017, author = {Lask, Joachim E. and Kriechbaum, Ralph}, title = {Gute Eltern sind bessere Mitarbeiter}, publisher = {Springer-Verlag}, address = {Berlin Heidelberg}, isbn = {978-3-642-34808-2}, publisher = {Technische Hochschule Rosenheim}, year = {2017}, abstract = {Ihr doppelter Gewinn des Buches: Eltern k{\"o}nnen ihre Kompetenzen in Worte fassen und bieten diese selbstbewusst auf dem Arbeitsmarkt an. Unternehmen gewinnen mit der Entdeckung des Kompetenzcenters Familie den effektivsten Bildungsort f{\"u}r Mitarbeiter und F{\"u}hrungskr{\"a}fte und das mit geringem Aufwand. Wirtschaft und Eltern werden Partner! Haben auch Sie schon davon geh{\"o}rt, dass erfolgreiche Pers{\"o}nlichkeiten Ihre F{\"a}higkeiten im Umgang mit Menschen in der eigenen Familie gelernt haben? In diesem Buch erfahren Sie, dass wissenschaftlich gesicherte Erkenntnisse dies best{\"a}tigen und dass informelles Lernen bei der Kompetenzbildung den gr{\"o}ßten Einfluss hat. {\"U}berzeugend und anschaulich verdeutlichen die Autoren, wie Arbeitgeber und Unternehmen „ihre Eltern" daf{\"u}r besonders sch{\"a}tzen k{\"o}nnen, dass diese sich im „Kompetenzcenter Familie" fort- und weiterbilden, etwa in Ambiguit{\"a}tstoleranz, Sozialer und Emotionaler Intelligenz, Change Management, Zielbildung, Konfliktf{\"a}higkeit oder leistungsf{\"o}rderndem Feedback. Halbstrukturierte Interviews mit prominenten Pers{\"o}nlichkeiten und erfolgreichen F{\"u}hrungskr{\"a}ften illustrieren dies beispielhaft und verst{\"a}ndlich. Geleitworte von bekannten Pers{\"o}nlichkeiten wie beispielsweise von Jesper Juul geben dem Buch eine besondere Note. Durch dieses Buch werden Eltern, Personal- und Organisationsentwickler entdecken, dass der informelle Bildungsort Familie die beste Kompetenzbildung f{\"u}r moderne Arbeitspl{\"a}tze bietet.}, language = {de} } @article{Pfau2017, author = {Pfau, Jochen}, title = {Fremde oder Freunde? Verantwortung des Planers bei Brandschutzmaßnahmen im Trockenbau}, series = {DBZ - Deutsche BauZeitschrift}, journal = {DBZ - Deutsche BauZeitschrift}, number = {10/2017}, publisher = {Bauverlag}, address = {G{\"u}tersloh}, year = {2017}, language = {de} } @inproceedings{Mayr2017, author = {Mayr, Andreas}, title = {Schallschutz mit der neuen DIN 4109, Was hat sich im Bauteilkatalog Trockenbau ge{\"a}ndert?}, series = {Das Forum 2017 - Zukunft Trockenbau Ausbau, Berlin, Deutschland, September 2017.}, booktitle = {Das Forum 2017 - Zukunft Trockenbau Ausbau, Berlin, Deutschland, September 2017.}, year = {2017}, abstract = {Die DIN 4109 regelt die Anforderungen an den Schallschutz in Geb{\"a}uden sowie den Nachweis der Einhaltung dieser Anforderungen. Im Juli 2016 erschien die komplett {\"u}berarbeitete und neu strukturierte „neue" DIN 4109. Im Vortrag werden wesentliche {\"A}nderungen, die neuen Rechenverfahren und die relevanten Bauteilkataloge kurz erl{\"a}utert. {\"A}nderungen, die sich speziell f{\"u}r die schalltechnische Planung und Ausf{\"u}hrung des Trockenbaus ergeben, werden anhand von praktischen Beispielen aufgezeigt. Damit soll ein Gef{\"u}hl f{\"u}r M{\"o}glichkeiten und Grenzen in der Anwendung der neuen Norm vermittelt werden.}, language = {de} } @article{Schlosser2017, author = {Schloßer, Philipp}, title = {Schadensersatzanspr{\"u}che und Regressm{\"o}glichkeiten der Krankenkassen bei Behandlungsfehlern - die Rechtslage in Deutschland}, series = {Soziale Sicherheit}, volume = {2017}, journal = {Soziale Sicherheit}, pages = {365}, year = {2017}, language = {de} } @article{SchlosserHeppekausen2017, author = {Schloßer, Philipp and Heppekausen, Christoph}, title = {Vertr{\"a}ge zur Anwendungsbeobachtungen pr{\"u}fen im Lichte von \S 299a und b StGB}, series = {Pflege- und Krankenhausrecht}, volume = {2017}, journal = {Pflege- und Krankenhausrecht}, number = {3}, pages = {78}, year = {2017}, language = {de} } @misc{Lueftl2017, author = {L{\"u}ftl, Katharina}, title = {Kinder und Demenz. Altersgerechte Zug{\"a}nge, um mit Kindern {\"u}ber Demenz ins Gespr{\"a}ch zu kommen. M{\"u}hldorfer Generationengespr{\"a}ch. M{\"u}hldorf a. Inn am 25.07.2017}, editor = {L{\"u}ftl,}, year = {2017}, language = {de} } @misc{Lueftl2017, author = {L{\"u}ftl, Katharina}, title = {Praxisauftr{\"a}ge f{\"u}r Studierende. 2. Forum Praxisanleitung im Studiengang Pflege der Hochschule Rosenheim. M{\"u}hldorf a. Inn am 21.02.2017}, editor = {L{\"u}ftl,}, year = {2017}, language = {de} } @misc{Lueftl2017, author = {L{\"u}ftl, Katharina}, title = {Ziele ausbildungsintegrierender Bachelorstudieng{\"a}nge in der Pflege. Forum Berufliche Einm{\"u}ndung im Studiengang Pflege der Hochschule Rosenheim. M{\"u}hldorf a. Inn am 9.02.2017}, editor = {L{\"u}ftl,}, year = {2017}, language = {de} } @article{DupasMusolffJawitzetal.2017, author = {Dupas, R. and Musolff, A. and Jawitz, J. W. and Rao, P. S. C. and J{\"a}ger, Christoph G. and Fleckenstein, J. H. and Rode, M. and Borchardt, D.}, title = {Carbon and nutrient export regimes from headwater catchments to downstream reaches}, series = {Biogeosciences}, volume = {14}, journal = {Biogeosciences}, number = {18}, pages = {4391 -- 4407}, year = {2017}, abstract = {Excessive amounts of nutrients and dissolved organic matter in freshwater bodies affect aquatic ecosystems. In this study, the spatial and temporal variability in nitrate (NO3-), dissolved organic carbon (DOC) and soluble reactive phosphorus (SRP) was analyzed in the Selke (Germany) river continuum from three headwaters draining 1-3 km2 catchments to two downstream reaches representing spatially integrated signals from 184-456 km2 catchments. Three headwater catchments were selected as archetypes of the main landscape units (land use  ×  lithology) present in the Selke catchment. Export regimes in headwater catchments were interpreted in terms of NO3-, DOC and SRP land-to-stream transfer processes. Headwater signals were subtracted from downstream signals, with the differences interpreted in terms of in-stream processes and contributions from point sources. The seasonal dynamics for NO3- were opposite those of DOC and SRP in all three headwater catchments, and spatial differences also showed NO3- contrasting with DOC and SRP. These dynamics were interpreted as the result of the interplay of hydrological and biogeochemical processes, for which riparian zones were hypothesized to play a determining role. In the two downstream reaches, NO3- was transported almost conservatively, whereas DOC was consumed and produced in the upper and lower river sections, respectively. The natural export regime of SRP in the three headwater catchments mimicked a point-source signal (high SRP during summer low flow), which may lead to overestimation of domestic contributions in the downstream reaches. Monitoring the river continuum from headwaters to downstream reaches proved effective to jointly investigate land-to-stream and in-stream transport, and transformation processes.}, language = {en} } @article{JaegerHagemannBorchardt2017, author = {J{\"a}ger, Christoph G. and Hagemann, J. and Borchardt, D.}, title = {Can nutrient pathways and biotic interactions control eutrophication in riverine ecosystems? Evidence from a model driven mesocosm experiment}, series = {Water Research}, volume = {115}, journal = {Water Research}, pages = {162 -- 171}, year = {2017}, abstract = {Ecological theory predicts that the relative importance of benthic to planktonic primary production usually changes along the rivers' continuum from a predomination of benthic algae in lower stream orders to a predomination of planktonic algae at higher orders. Underlying mechanisms driving the interaction between algae in these habitats, its controlling factors and consequences for riverine ecosystems are, however, only partly understood. We present a mechanistic analysis of the governing ecological processes using a simplified, numerical model and examine how abiotic factors and biotic interactions influence benthic and planktonic algae by changing resource competition. We compare the outcome of the model with the results of a factorial mesocosm experiment mimicking the parameter spaces of the model. The results show a remarkable similarity with regard to the temporal development of benthic and pelagic algal biomass and shifting dominance patterns. In particular we analyse the effects of the pathways of nutrient supply (upwelling from the hyporheic zone, direct supply to the surface water, or via both pathways) and grazing in a gradient of river depths. Our results show that detachment of benthic algae, sinking of planktonic algae and the pathway of nutrient supply are key processes determining the respective algal biomass distributions particularly in shallow and intermediate deep systems. Increasing nutrient supply increases algal biomasses, but does not change the general pattern of the interactions. Decreasing light supply decreases the dominance of planktonic algae, but increases dissolved nutrients. At intermediate to high grazing rates algal biomass can be controlled by grazers, but however, at high grazing rates, dissolved nutrients accumulate in the surface water. Our results indicate that nutrient pathways, resource competition and internal control by grazing need to be considered explicitly for the understanding and explanation of eutrophication phenomena in riverine ecosystems. As a consequence, ecologically effective eutrophication management of running water systems has to go beyond the control of nutrient emissions or the achievement of limiting threshold values in the receiving waters, but requires the consideration of the nutrient pathways (surface water versus groundwater) and the shifting biological controls from lower to higher order stream ecosystems.}, language = {en} } @incollection{Werning2017, author = {Werning, Hanno}, title = {Nichttragende innere Trennw{\"a}nde; Ein Wegweiser durch die formalen Regelungen - von der materiellen Anforderung bis zur Leistungserkl{\"a}rung mit den wesentlichen Merkmalen}, series = {Bauprodukte Aktuell}, booktitle = {Bauprodukte Aktuell}, number = {7/2017}, editor = {Krause-Czeranka, Thomas}, publisher = {FeuerTRUTZ Network GmbH}, address = {K{\"o}ln}, pages = {2 -- 11}, year = {2017}, abstract = {Der Beitrag zeigt die bauordnungsrechtlichen Anforderungen allgemein uns speziell hinsichtlich des Brandschutzes an nichttragende innere Trennw{\"a}nde auf. Dazu werden formalen Randbedingungen f{\"u}r die Nachweisf{\"u}hrung, insbesondere mit Blick auf nach der EU-Bauprodukte-Verordnung CE-gekennzeichnete Produkte und Baus{\"a}tze f{\"u}r Trennw{\"a}nde dargestellt.}, language = {de} } @inproceedings{Rabold2017, author = {Rabold, Andreas}, title = {Mehrgeschosser in Massivholzbauweise - Schalltechnische Planung und Ausf{\"u}hrung}, series = {Bauphysik Forum 2017, 8. INTERNATIONALER HOLZ[BAU]PHYSIK KONGRESS, Bad Ischl}, booktitle = {Bauphysik Forum 2017, 8. INTERNATIONALER HOLZ[BAU]PHYSIK KONGRESS, Bad Ischl}, year = {2017}, abstract = {Zum Schutz gegen unzumutbare Bel{\"a}stigungen aus fremden Wohnbereichen werden in der DIN 4109 Anforderungen an die Schalld{\"a}mmung der Trennbauteile zwischen den Wohnbereichen gestellt. Diese Anforderungen k{\"o}nnen von heute {\"u}blichen Konstruktionen bei fehlerfreier Ausf{\"u}hrung sowohl in Holzbauweise als auch in Massivbauweise problemlos eingehalten werden. Dies spiegelt sich auch bei G{\"u}tepr{\"u}fungen der Luft -und Trittschall-d{\"a}mmung am Bau wider. Bei Umfragen unter den Bewohnern von Mehrfamilienh{\"a}usern wird jedoch h{\"a}ufig die Trittschall{\"u}bertragung der Trenndecke als st{\"o}rendeGer{\"a}uschquelle genannt. Die Beurteilung der Trittschall{\"u}bertragung von Trenndecken anhand des bewerteten Norm - Trittschallpegels im Bau als alleinige Bewertungsgr{\"o}ße scheint somit unabh{\"a}ngig von der Bauweise nich t ausreichend zu sein, um dem subjektiven Empfinden des Bewohners gerecht zu werden. Als Voraussetzung f{\"u}r die Auswahl geeigneter Deckenkonstruktionen immehrgeschossigen Holzbau wird deshalb in Abschnitt 2 zun{\"a}chst ein zutreffendes Beurteilungskriterium f{\"u}r die Trittschall{\"u}bertragung gew{\"a}hlt und Wege zur konstruktiven Umsetzung aufgezeigt. Bei der Luftschalld{\"a}mmung von Trennw{\"a}nden und Trenndecken in der Geschossbauweise spielt der Anteil der Flanken{\"u}bertragung eine wesentliche Rolle, wie die Beispiele ausgef{\"u}hrter Objekte in Abschnitt 3 zeigen. Um diese Anteile der Flanken{\"u}bertragung genauer ber{\"u}cksichtigen zu k{\"o}nnen und eine wirtschaftlichere Planung zu erm{\"o}glichen wird ein Forschungsprojekt durchgef{\"u}hrt, auf dessen Inhalte in Abschnitt 4 vorgestellt werden.}, language = {de} } @inproceedings{Rabold2017, author = {Rabold, Andreas}, title = {Schallschutz von Massivholzkonstruktionen und Prognose von Trittschallpegeln an Holzbalkendecken}, series = {Forum Dach- und Holzbau 2017 K{\"u}mmersbruck}, booktitle = {Forum Dach- und Holzbau 2017 K{\"u}mmersbruck}, year = {2017}, language = {de} } @inproceedings{RaboldChateauvieuxHellwigMecking2017, author = {Rabold, Andreas and Ch{\^a}teauvieux-Hellwig, C. and Mecking, S.}, title = {Optimierung von Holzdecken in Bezug auf die DIN 4109}, series = {HolzBauSpezial Bauphysik 2017, Bad W{\"o}rishofen}, booktitle = {HolzBauSpezial Bauphysik 2017, Bad W{\"o}rishofen}, year = {2017}, language = {de} } @inproceedings{GottschalkPflaumSchneideretal.2017, author = {Gottschalk, L. and Pflaum, D. and Schneider, S. and Schulze, Achim and Becker, F. and Queck, M. and H{\"u}ttl, B.}, title = {Evaluation of a compehensive IV- Outdoor Characterization Method for Photovoltaik Modules}, series = {Proceedings of the 33rd EU-PVSEC}, booktitle = {Proceedings of the 33rd EU-PVSEC}, year = {2017}, language = {en} } @inproceedings{AuerZscheile2017, author = {Auer, Veronika and Zscheile, Mathias}, title = {Designing the beech wood supply chain. Vortrag auf der BioEconomy Conference 11. Mai 2017 in Halle/Saale.}, series = {BioEconomy Conference. Sciences Campus Halle, BioEconomy Cluster. Halle/Saale, 11.05.2017}, booktitle = {BioEconomy Conference. Sciences Campus Halle, BioEconomy Cluster. Halle/Saale, 11.05.2017}, year = {2017}, abstract = {Bio-based products show a great potential to reduce the dependence on fossil resources. Germany currently has a forerunner role in the EU, using biomass as the same resource base for material and energetic utilisation. Beech wood is hyped in both ways: In material usage directly e.g., in the building sector to balance the possible scarcity of soft wood in the future, as well as indirectly as a feedstock for biorefineries, representing a long-term alternative to the fossil-based industry, and secondly, as energetic use due to its excellent burning quality. The BIOECONOMY CLUSTER sees itself as an actor in a difficult tension field within implementation of the wood-based Bioeconomy. With a total stocking volume of about 635 million m3, beech is the most abundant hardwood tree species in Germany. Nevertheless, beech wood-based biorefineries compete in a difficile tension field. One crucial factor is the reliable supply of raw materials - a consistent biomass quality, season-independent availability and efficient logistics of the raw material. However, the production processes are technically feasible; thus, finally, there is no guarantee for selling the bio-based products to the obtained price. How to overcome the strong tension field in the beech-based Bioeconomy? Different selected examples show possible approaches. To manage the wood-based Bioeconomy and the beech wood supply chain effectively, the influencing of factors and the managing of the same is crucial.}, language = {en} } @misc{AuerKeilZscheile2017, author = {Auer, Veronika and Keil, Philipp and Zscheile, Mathias}, title = {Optimierung der Nutzungspfade in der holzbasierten Bio{\"o}konomie (Posterbeitrag). auf der Tagung Biobasierte Chemie im Fluss.}, editor = {Auer, Veronika}, year = {2017}, language = {de} } @inproceedings{Zentgraf2017, author = {Zentgraf, Peter}, title = {ANALYTICAL ATTITUDE DETERMINATION FROM A SPECIFIC RATE PROFILE}, series = {40th ANNUAL AAS GUIDANCE AND CONTROL CONFERENCE, Breckenridge, Colorado, USA}, booktitle = {40th ANNUAL AAS GUIDANCE AND CONTROL CONFERENCE, Breckenridge, Colorado, USA}, year = {2017}, abstract = {The problem dealt with in this paper is the analytical determination of the attitude of a rigid body which undergoes a given rate profile. Usually the attitude is determined by solving the kinematic differential equation numerically. For long lasting movements the outcome can cost computation time plus encountered losses in accuracy, which can be disturbing especially in optimization problems. This contribution solves the kinematic differential equation for certain rate profiles exactly and compares the results in accuracy and computation time with the standard procedures.}, language = {en} } @article{Schutter2017, author = {Schutter, Sabina}, title = {Die Erziehung der Jugend: Vom Wandel der Erziehungsziele im Kinder- und Jugendhilferecht}, series = {{\"O}stereichische Zeitschrift f{\"u}r Soziologie}, volume = {42}, journal = {{\"O}stereichische Zeitschrift f{\"u}r Soziologie}, number = {4}, pages = {367 -- 386}, year = {2017}, abstract = {Das deutsche Kinder- und Jugendhilferecht normiert in seinem \S 1 Deutsches Sozialgesetz, Achtes Buch (SGB VIII) ein Recht auf Erziehung, das mit spezifischen Erziehungszielen verbunden ist. Der vorliegende Artikel zeichnet die historische Entwicklung und Ver{\"a}nderung dieser Erziehungsziele nach und zeigt anhand einer Diskursanalyse neuerer Verhandlungen um das Kinder- und Jugendhilferecht, wie Erziehung und ihre Ziele mit Blick auf das generationale Ordnen verhandelt werden.}, language = {de} } @inproceedings{MayrEinigRabold2017, author = {Mayr, Andreas R. and Einig, Jens and Rabold, Andreas}, title = {Bauteilkatalog Leichtbau nach DIN 4109}, series = {10. Europ{\"a}ischer Kongress EBH 2017, K{\"o}ln, Deutschland}, booktitle = {10. Europ{\"a}ischer Kongress EBH 2017, K{\"o}ln, Deutschland}, year = {2017}, language = {de} } @inproceedings{Schoepfer2017, author = {Sch{\"o}pfer, F.}, title = {K{\"o}rperschall{\"u}bertragung im Holzbau. {\"U}bertragungsfunktionen}, series = {Forum Holzbau HBS}, booktitle = {Forum Holzbau HBS}, year = {2017}, language = {de} } @inproceedings{Rabold2017, author = {Rabold, Andreas}, title = {Mehrgeschosser in Massivholzbauweise - Schalltechnische Planung und Ausf{\"u}hrung}, series = {Bauphysikertreffen, Hochschule f{\"u}r Technik Stuttgart, November 2017}, booktitle = {Bauphysikertreffen, Hochschule f{\"u}r Technik Stuttgart, November 2017}, pages = {3 -- 11}, year = {2017}, language = {de} } @article{Ott2017, author = {Ott, Robert}, title = {Gibt es Buchf{\"u}hrung auch in spannend?}, series = {Konferenzband CARF Luzern 2017, Schriften aus dem Institut f{\"u}r Finanzdienstleistungen Zug IFZ}, volume = {2017}, journal = {Konferenzband CARF Luzern 2017, Schriften aus dem Institut f{\"u}r Finanzdienstleistungen Zug IFZ}, number = {43}, editor = {Nadig, Linard and Egle, Ulrich}, publisher = {Verlag IFZ  - Hochschule Luzern - Wirtschaft}, address = {Luzern}, pages = {487 -- 502}, year = {2017}, language = {de} } @article{ProdingerO'ConnorStuckietal.2017, author = {Prodinger, Birgit and O'Connor, R.J. and Stucki, G. and Tennant, A.}, title = {Establishing score equivalence of the Functional Independence Measure (FIM™) motor scale and the Barthel Index, utilising the International Classification of Functioning, Disability and Health (ICF) and Rasch Measurement Theory}, series = {Journal of Rehabilitation Medicine}, volume = {49}, journal = {Journal of Rehabilitation Medicine}, number = {5}, pages = {416 -- 422}, year = {2017}, abstract = {Introduction: Two widely used outcome measures to assess functioning in neurological rehabilitation are the Functional Independence Measure (FIM™) and the Barthel Index. The current study aims to establish the equivalence of the total score of the FIM™ motor scale and the Barthel Index through the application of the International Classification of Functioning, Disability and Health, and Rasch measurement theory. Methods: Secondary analysis of a large sample of patients with stroke, spinal cord injury, and multiple sclerosis, undergoing rehabilitation was conducted. All patients were assessed at the same time on both the FIM™ and the Barthel Index. The International Classification of Functioning, Disability and Health Linking Rules were used to establish conceptual coherency between the 2 scales, and the Rasch measurement model to establish an exchange of the total scores. Results: Using the FIM™ motor scale, items from both scales linked to the International Classification of Functioning, Disability and Health d4 Mobility or d5 Self-care chapters. Their co-calibration satisfied the assumptions of the Rasch model for each of 3 diagnostic groups. A ceiling effect was observed for the Barthel Index when contrasted against the FIM™ motor scale. Conclusion: Having a Rasch interval metric to transform scores between the FIM™ motor scale and Barthel Index is valuable for monitoring functioning, meta-analysis, quality audits and hospital benchmarking.}, language = {en} } @article{TimpteMeckingSchandaetal.2017, author = {Timpte, A. and Mecking, S. and Schanda, Ulrich and Rabold, A.}, title = {Stoßstellend{\"a}mm-Maße von Brettsperrholzkonstruktionen}, series = {Deutsche Gesellschaft f{\"u}r Akustik e.V. (ed.), Fortschritte der Akustik - DAGA}, journal = {Deutsche Gesellschaft f{\"u}r Akustik e.V. (ed.), Fortschritte der Akustik - DAGA}, year = {2017}, language = {de} } @inproceedings{TimpteMeckingSchandaetal.2017, author = {Timpte, A. and Mecking, S. and Schanda, Ulrich and Rabold, A.}, title = {Vibration reduction indices of CLT junctions}, series = {Proceedings of ICSV24}, booktitle = {Proceedings of ICSV24}, year = {2017}, abstract = {The multi-disciplinary research project "Vibroacoustic analysis in the planning process of timber constructions" carried out in cooperation between the University of Applied Sciences Rosenheim, the ift Rosenheim and the Technical University Munich is a comprehensive study of direct as well as flanking structure-borne and airborne sound insulation of Cross Laminated Timber (CLT) elements and their junctions. The aim is to optimize and simplify the acoustical planning process of wooden multi-storey buildings and thereby to contribute to the increase growth of timber construction industry in Europe. For a prediction of the acoustical performance of solid wood constructions, the vibration reduction index Kij is needed. The vibration reduction index can be determined i.a. of the direction-averaged junction velocity level difference and the structural reverberation time. Both quantities need to be measured according to EN ISO 10848. Alternatively, vibration reduction indices for a T- or cross-junction can be derived following the procedures described in prEN ISO 12354-1:2016. However, further knowledge and data of the sound transmission across junctions of CLT is inevitable for a reliable prediction. In this paper a collection of frequency dependent vibration reduction indices for CLT structures will be presented and compared, involving L-, T- and cross-junctions measured by six international laboratories.}, language = {de} } @article{SchutterLueftlLoehe2017, author = {Schutter, S. and L{\"u}ftl, Katharina and L{\"o}he, J.}, title = {Studieren, wo der Mensch z{\"a}hlt}, series = {Die neue Hochschule}, journal = {Die neue Hochschule}, number = {46(5)}, year = {2017}, language = {de} } @article{Lueftl2017, author = {L{\"u}ftl, Katharina}, title = {Aus Praxissituationen Ziele einer Lehrveranstaltung entwickeln: Wie die Pflegedidaktik die Lehre in dualen Pflegestudieng{\"a}ngen bereichern kann}, series = {Kemser J.; Kerres A. (Hg.): Lehrkompetenz lehren}, journal = {Kemser J.; Kerres A. (Hg.): Lehrkompetenz lehren}, publisher = {De Gruyter}, address = {Oldenbourg}, year = {2017}, language = {de} } @inproceedings{MeckingScheibengraberKruseetal.2017, author = {Mecking, Simon and Scheibengraber, Markus and Kruse, Tobias and Schanda, Ulrich and Wellisch, Ulrich}, title = {Energiebestimmung an Brettsperrholzbauteilen im Holzmassivbau}, series = {Deutsche Gesellschaft f{\"u}r Akustik e.V. (ed.): Fortschritte der Akustik - DAGA 2017, 43. Deutsche Jahrestagung f{\"u}r Akustik, Kiel, Deutschland}, booktitle = {Deutsche Gesellschaft f{\"u}r Akustik e.V. (ed.): Fortschritte der Akustik - DAGA 2017, 43. Deutsche Jahrestagung f{\"u}r Akustik, Kiel, Deutschland}, year = {2017}, abstract = {Ein Ziel des DFG-AiF-Clusterforschungsvorhabens Vibroakustik im Planungsprozess f{\"u}r Holzbauten ist die Reduktion des schalltechnischen Planungsaufwandes bei der Holzmassivbauweise. Hierzu soll das Prognoseverfahren der DIN EN 12354 angepasst werden. Darin ist ein vereinfachter SEA-Ansatz zugrunde gelegt, welcher diffuse K{\"o}rperschallfelder in den Bauteilen sowie deren schwache Kopplung voraussetzt. Tats{\"a}chlich trifft die Annahme diffuser K{\"o}rperschallfelder nur bei Bauteilen mit geringer Ausbreitungsd{\"a}mpfung zu. Um ein Maß f{\"u}r die Kopplung der Bauteile zu erhalten, wird ein Energieverh{\"a}ltnis aus den Bauteilschnellen gebildet. In der DIN EN ISO 10848-1 wird eine Vorschrift f{\"u}r die Messung der mittleren Bauteilschnelle beschrieben. Daraus wird ein {\"o}rtlich und zeitlich gemittelter Schnellepegel je Bauteil berechnet, mit dem die Energie des Bauteils bestimmt wird. In diesem Beitrag werden Messergebnisse von K{\"o}rperschallfeldern an Brettsperrholzelementen im Hinblick auf die Energiebestimmung diskutiert. Bei der statistischen Auswertung werden die Anzahl der Anregepositionen und der Messpositionen auf dem direkt und indirekt angeregten Bauteil analysiert. In einem weiteren Schritt werden die erforderlichen Messpositionen durch eine geeignete Auswahl reduziert und mit den pauschalen, geometrischen Vorgaben der Messvorschrift aus der DIN EN ISO 10848-1 verglichen. Die Erkenntnisse werden zur Bewertung von Messergebnissen und f{\"u}r Empfehlungen an die Durchf{\"u}hrung zuk{\"u}nftiger Messungen herangezogen.}, language = {de} } @article{MeckingScheibengraberKruseetal.2017, author = {Mecking, Simon and Scheibengraber, Markus and Kruse, Tobias and Schanda, Ulrich and Wellisch, Ulrich}, title = {Experimentally based statistical analysis of the vibrational energy of CLT building elements}, series = {24th International Congress on Sound and Vibration, ICSV24, London, United Kingdom, July 2017}, journal = {24th International Congress on Sound and Vibration, ICSV24, London, United Kingdom, July 2017}, year = {2017}, abstract = {The method is based on a simplified Statistical Energy Analysis(SEA) approach. The energy ratios of various subsystems are the main quantities to predict sound transmission. The method has proven to work sufficiently accurate for masonry and concrete buildings, where the building components like walls, floors etc. can be regarded as rather homogeneous structures. To adapt this method for solid timber constructions it is necessary to prove that basic SEA requirements are fullfilled by orthotropic materials and heterogeneous structures that occur in these building types. In a case study, an isolated T-junction formed by Cross Laminated Timber(CLT) elements is experimentally investigated. The buildings elements are subdivided in segments with typical screwed connections. In the experiments the diffusivity of the vibration field is investigated, using point excitation with a shaker at several positions and many, randomly chosen response positions. MONTE-CARLO simulations are conducted for random but fix-sized subsets of the measured response positions to find the necessary number of response positions for an accurate determination of the vibrational energy. As a result the distribution of the mean velocity levels can be approximated. In a second approach a multiple linear regression model based on the least absolute shrinkage and selection operator(LASSO)is applied, because for lower frequency bands multicollinearity is expected. In the context of linear regression modelling, data-driven methods are used to select optimal subsets of response positions, to get an estimating equation.}, language = {en} } @techreport{MeckingKruseWinteretal.2017, author = {Mecking, Simon and Kruse, Tobias and Winter, Christoph and Schanda, Ulrich}, title = {Teilprojekt 3: Parameterentwicklung und SEA-Modellierung}, series = {ift-Forschungsbericht (Hsg.): Vibroakustik im Planungsprozess f{\"u}r Holzbauten - Modellierung, numerische Simulation, Validierung}, journal = {ift-Forschungsbericht (Hsg.): Vibroakustik im Planungsprozess f{\"u}r Holzbauten - Modellierung, numerische Simulation, Validierung}, year = {2017}, abstract = {Auf Basis empirischer Daten wurde die Diffusit{\"a}t des K{\"o}rperschallfeldes von Brettsperrholz-Bauteilen in realistischer Gr{\"o}ße beschrieben und Verteilungssch{\"a}tzungen in Abh{\"a}ngigkeit der verwendeten Antwortanzahl durchgef{\"u}hrt. Ein n{\"a}herungsweise diffuses K{\"o}rperschallfeld liegt im Beispiel nur in einigen Terzb{\"a}ndern im mittleren Frequenzbereich vor. Damit ist eine Energiebestimmung mit wenigen Antwortpositionen nur dort m{\"o}glich. Die Energiebestimmung {\"u}ber die Schnelle ist bei tiefen Frequenzen f{\"u}r einige Frequenzb{\"a}nder ohne Moden nicht geeignet, da hier die Voraussetzung nicht gegeben ist, dass die kinetische gleich der potenziellen Energie ist. Hochfrequent hat der Krafteinleitungsort bezogen auf die Elementst{\"o}ße Einfluss auf die Antwortstreuungen. Dar{\"u}ber hinaus ist bei tiefen wie auch bei sehr hohen Frequenzen eine hohe Antwortanzahl notwendig.}, language = {de} } @article{WissingKerresLueftl2017, author = {Wissing, C. and Kerres, A. and L{\"u}ftl, Katharina}, title = {Das Pr{\"u}fungsformat OSCE (Teil 3). Injektionen, Verbandswechsel, Thromboseprophylaxe und Soor- und Parotitisprophylaxe}, series = {Pflegezeitschrift}, journal = {Pflegezeitschrift}, number = {70(7)}, year = {2017}, abstract = {Studierende des Bachelorstudiengangs Pflegep{\"a}dagogik an der KSH M{\"u}nchen haben im Rahmen eines Studienprojektes f{\"u}r echte Pr{\"u}fungssituationen in der Gesundheits- und Krankenpflegeausbildung, der Altenpflegeausbildung oder des dualen Pflegestudiums OSCE-Pr{\"u}fungen entwickelt und durchgef{\"u}hrt. In dieser Ausgabe gibt es ein Pr{\"u}fungsbeispiel, das die Studierenden f{\"u}r die Berufsfachschule f{\"u}r Krankenpflege Maria Regina entwickelt haben}, language = {de} } @article{KerresLueftlWissing2017, author = {Kerres, A. and L{\"u}ftl, Katharina and Wissing, C.}, title = {Das Pr{\"u}fungsformat OSCE (Teil 2). K{\"o}rperpflege, Vitalzeichen, Bewegen/Lagern sowie Thrombose- und Kontrakturenprophylaxe}, series = {Pflegezeitschrift}, journal = {Pflegezeitschrift}, number = {70(6)}, year = {2017}, language = {de} } @article{WissingKerresLueftl2017, author = {Wissing, C. and Kerres, A. and L{\"u}ftl, Katharina}, title = {Das Pr{\"u}fungsformat OSCE im Pflegep{\"a}dagogikstudium erlernen (Teil 1)}, series = {Pflegezeitschrift}, journal = {Pflegezeitschrift}, number = {70(5)}, year = {2017}, abstract = {Der vorliegende Beitrag ist Auftakt einer Serie von OSCE-Pr{\"u}fungen, die Studierende des Bachelorstudiengangs Pflegep{\"a}dagogik an der KSH M{\"u}nchen im Rahmen eines Studienprojektes f{\"u}r echte Pr{\"u}fungssituationen in der Gesundheits- und Krankenpflegeausbildung, der Altenpflegeausbildung oder des dualen Pflegestudiums entwickelt und durchgef{\"u}hrt haben. Zun{\"a}chst wird das Konzept der OSCE-Pr{\"u}fung und der Aufbau des Studienprojektes vorgestellt. In den n{\"a}chsten Ausgaben folgen Ausz{\"u}ge aus den Pr{\"u}fungen und kurze Erfahrungsberichte. Abgeschlossen wird mit einer Evaluation durch alle beteiligten Lernenden und Lehrenden.}, language = {de} } @inproceedings{SpaethKarlinger2017, author = {Sp{\"a}th, Michael and Karlinger, Peter}, title = {Optimierungspotenziale beim Spritzgießen durch Prozess{\"u}berwachung und moderne Regelmethoden}, series = {Spritzgießertagung Baden-Baden}, booktitle = {Spritzgießertagung Baden-Baden}, year = {2017}, language = {de} } @article{WissingLueftlKerres2017, author = {Wissing, C. and L{\"u}ftl, Katharina and Kerres, A.}, title = {Das Pr{\"u}fungsformat OSCE (Teil 7). Evaluationsergebnisse aus dem Projekt der KSH M{\"u}nchen in Kooperation mit der HS Rosenheim und vier Berufsfachschulen f{\"u}r Gesundheits- und Krankenpflege oder Altenpflege in M{\"u}nchen}, series = {Pflegezeitschrift}, journal = {Pflegezeitschrift}, number = {70(11)}, year = {2017}, language = {de} } @article{WissingKerresLueftl2017, author = {Wissing, C. and Kerres, A. and L{\"u}ftl, Katharina}, title = {Das Pr{\"u}fungsformat OSCE (Teil 6). Infusionen mit Zusatz, subkutane und intramuskul{\"a}re Injektion, Legen eines Blasenkatheters}, series = {Pflegezeitschrift}, journal = {Pflegezeitschrift}, number = {70(10)}, year = {2017}, language = {de} } @article{WissingKerresLueftl2017, author = {Wissing, C. and Kerres, A. and L{\"u}ftl, Katharina}, title = {Das Pr{\"u}fungsformat OSCE (Teil 5). Alte Menschen personen- und situationsbezogen pflegen}, series = {Pflegezeitschrift}, journal = {Pflegezeitschrift}, number = {70(9)}, year = {2017}, language = {de} } @article{LueftlWissingKerres2017, author = {L{\"u}ftl, Katharina and Wissing, C. and Kerres, A.}, title = {Das Pr{\"u}fungsformat OSCE (Teil 4). Kommunikationstheorien im dualen Bachelorstudiengang Pflege}, series = {Pflegezeitschrift}, journal = {Pflegezeitschrift}, number = {70(8)}, year = {2017}, language = {de} } @techreport{KarlingerMercadoColmeneroRubioParamioetal.2017, author = {Karlinger, Peter and Mercado-Colmenero, Jorge Manuel and Rubio-Paramio, Miguel Angel and Martin-Do{\~n}ate, Cristina}, title = {A new procedure for calculating cycle time in injection molding based on plastic part geometry recognition}, year = {2017}, language = {en} } @inproceedings{SchefflerGehdeSpaethetal.2017, author = {Scheffler, T. and Gehde, M. and Sp{\"a}th, M. and Karlinger, Peter}, title = {Nutzung von Werkzeug und Maschinendaten zur Ermittlung des Fließerhaltens}, series = {Technomer Chemnitz}, booktitle = {Technomer Chemnitz}, year = {2017}, language = {de} } @techreport{SchemmeMichanicklKarlinger2017, author = {Schemme, M. and Michanickl, A. and Karlinger, Peter}, title = {Kompetenz-Zentrum Holz-Kunststoff, Partnering-Veranstaltung f{\"u}r Holz- und biobasierte Werkstoffe und Verbundwerkstoffe}, year = {2017}, language = {de} } @inproceedings{SchefflerGehdeSpaethetal.2017, author = {Scheffler, T. and Gehde, M. and Sp{\"a}th, M. and Karlinger, Peter}, title = {Determination of the flow and curing behavior of highly filled phenolic injection molding compounds by means of spiral mold}, series = {PPS Chemnitz}, booktitle = {PPS Chemnitz}, year = {2017}, language = {en} } @article{KarlingerSchwachulla2017, author = {Karlinger, Peter and Schwachulla, T.}, title = {Multifunktionale Naturfaser-Kunststoff-Composites}, series = {Firmenzeitschrift Motan}, journal = {Firmenzeitschrift Motan}, number = {4.Quartal 2017}, year = {2017}, language = {de} } @inproceedings{SpaethZillmerKarlingeretal.2017, author = {Sp{\"a}th, Michael and Zillmer, Markus and Karlinger, Peter and Schemme, Michael and Gehde, Michael}, title = {Einfluss des zeitabh{\"a}ngigen Materialzustands beim Spritzgießen von rieself{\"a}higen, duromeren Formmassen auf den Prozess und die Bauteileigenschaften}, series = {Technomer Chemnitz}, booktitle = {Technomer Chemnitz}, year = {2017}, language = {de} } @article{KarlingerSchadhauserMartinetal.2017, author = {Karlinger, Peter and Schadhauser, M. and Martin, J. and W{\"u}rtele, M. and Modler, N.}, title = {Homogenit{\"a}t ist der Schl{\"u}ssel}, series = {Kunststoffe}, journal = {Kunststoffe}, number = {9/2017}, year = {2017}, language = {de} } @article{HautMeckingSchanda2017, author = {Haut, Sandra and Mecking, Simon and Schanda, Ulrich}, title = {Experimentelle Bestimmung des Abstrahlgrades und des inneren Verlustfaktors orthotroper Platten}, series = {Deutsche Gesellschaft f{\"u}r Akustik e.V. (ed.): Fortschritte der Akustik - DAGA 2017, 43. Deutsche Jahrestagung f{\"u}r Akustik, Kiel, Deutschland}, journal = {Deutsche Gesellschaft f{\"u}r Akustik e.V. (ed.): Fortschritte der Akustik - DAGA 2017, 43. Deutsche Jahrestagung f{\"u}r Akustik, Kiel, Deutschland}, year = {2017}, language = {de} } @article{SchoepferHopkinsMayretal.2017, author = {Sch{\"o}pfer, F. and Hopkins, C. and Mayr, A. R. and Schanda, Ulrich}, title = {Ans{\"a}tze zur Prognose des Installationspegels im HolzLeichtbau}, series = {Deutsche Gesellschaft f{\"u}r Akustik e.V. (ed.), Fortschritte der Akustik - DAGA}, journal = {Deutsche Gesellschaft f{\"u}r Akustik e.V. (ed.), Fortschritte der Akustik - DAGA}, year = {2017}, language = {de} } @article{SchoepferHopkinsMayretal.2017, author = {Sch{\"o}pfer, Fabian and Hopkins, Carl and Mayr, Andreas R. and Schanda, Ulrich}, title = {Measurement of transmission functions in lightweight buildings for the prediction of structure-borne sound transmission from machinery}, series = {Acta Acustica united with Acustica}, volume = {2017}, journal = {Acta Acustica united with Acustica}, number = {103}, pages = {451 -- 464}, year = {2017}, language = {en} } @article{SchoepferHopkinsMayretal.2017, author = {Sch{\"o}pfer, F. and Hopkins, C. and Mayr, A. and Schanda, Ulrich}, title = {Prediction of noise from machinery in timber-frame buildings using transmission functions}, series = {Proceedings of ICSV24}, journal = {Proceedings of ICSV24}, year = {2017}, abstract = {To ensure that building regulations are satisfied, the sound pressure level due to machinery has to be predicted at the design stage of a new building. With the increasing popularity of multistory timber dwellings, prediction becomes an important issue for designers and consultants. At present previous project experience is often used when considering the design of wall and floor constructions and the mounting positions for machinery. Simple tools to calculate the sound pressure levels in rooms based on machinery data and construction details are not currently available. The approach involves two stages: firstly the description of the source and secondly the prediction of vibration transmission across the building and sound radiation into the rooms. In this paper a simple empirical model is proposed for the second stage. This approach is based on measured transmission functions that are defined as the average sound pressure level in a receiving room relative to the injected structure-borne sound power. This is a logical extension of approaches to characterize structure-borne sound sources that also use a power based descriptor (e.g. prEN15657:2016-02: Acoustic properties of building elements and of buildings - Laboratory measurement of structure-borne sound from building service equipment for all installation conditions) and provides a simple method to estimate the sound pressure level in a room.}, language = {en} } @inproceedings{HoellthalerHagl2017, author = {H{\"o}llthaler, Julia and Hagl, Rainer}, title = {Plattformunabh{\"a}ngige modellbasierte Entwicklung von hochdynamischen Antriebsregelungen}, series = {MATLAB EXPO 2017 Deutschland, M{\"u}nchen, 27. Juni 2017}, booktitle = {MATLAB EXPO 2017 Deutschland, M{\"u}nchen, 27. Juni 2017}, year = {2017}, language = {de} } @inproceedings{StubenrauchWittmannKiermayeretal.2017, author = {Stubenrauch, Franz and Wittmann, Josef and Kiermayer, Alexander and Seliger, Norbert and Hagl, Rainer and Schmitt-Landsiedel, Doris and Kennel, Ralph}, title = {FPGA-based High Dynamic Servo Drive Control with a 200kHz Gallium Nitride Inverter}, series = {2017 19th European Conference on Power Electronics and Applications (EPE'17 ECCE Europe), Warsaw, Poland}, booktitle = {2017 19th European Conference on Power Electronics and Applications (EPE'17 ECCE Europe), Warsaw, Poland}, year = {2017}, abstract = {Increased productivity in industrial processes can be achieved by dynamic and accurate positioning of servo drives. Therefore, improvement of servo drive dynamics using latest technologies in the key components such as inverter, control system and position measuring device are investigated. Using Gallium Nitride (GaN) or Silicon Carbide (SiC) semiconductors for motor inverters enables energy efficient operation up to pulse width modulation (PWM) frequencies of 500 kHz. This allows motor filters with small component sizes. As a result, high motor efficiency, low torque ripple, high control bandwidth and almost ideal sinusoidal output voltages are achieved. Experiments on a 200 kHz Gallium Nitride inverter with sine wave motor filter show a current control loop bandwidth of 3.2 kHz and almost ideal sinusoidal phase voltages. The achieved bandwidths of the speed and position control loops are 318 Hz and 106 Hz, respectively.}, language = {en} } @inproceedings{WittmannHaglKennel2017, author = {Wittmann, Josef and Hagl, Rainer and Kennel, Ralph}, title = {Hybrid Current and Acceleration Control of Servo Drives}, series = {PCIM Europe 2017 - International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, N{\"u}rnberg}, booktitle = {PCIM Europe 2017 - International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, N{\"u}rnberg}, year = {2017}, abstract = {A hybrid current and acceleration control is presented and shown to improve the load disturbance behavior of servo drives significantly without additional sensor effort. The feedback signal of the acceleration control loop is calculated from the position data of the motor encoder. Hence, position measuring errors influence this control loop and lead to speed ripple. Therefore, the presented design of the acceleration control loop considers both load sensitivity and position measuring errors.}, language = {en} } @incollection{HackerHolzmeier2017, author = {Hacker, Bernd and Holzmeier, Maximilian}, title = {Kommentierung zu \S\S 311 und 312}, series = {Bilanzrecht-Kommentar}, booktitle = {Bilanzrecht-Kommentar}, editor = {Hachmeister, Dirk and Kahle, Holger and Mock, Sebastian and Sch{\"u}ppen, Matthias}, edition = {1}, publisher = {Verlag Dr. Otto Schmidt}, address = {K{\"o}ln}, publisher = {Technische Hochschule Rosenheim}, pages = {1481 -- 1530}, year = {2017}, language = {de} } @article{HackerKamlage2017, author = {Hacker, Bernd and Kamlage, Franziska}, title = {Empirische Untersuchung zur Anwendung der Equity-Methode bei Joint Ventures nach IFRS in Deutschland}, series = {IRZ - Zeitschrift f{\"u}r Internationale Rechnungslegung}, volume = {2017}, journal = {IRZ - Zeitschrift f{\"u}r Internationale Rechnungslegung}, number = {12/2017}, publisher = {C.H.BECK in Gemeinschaft mit den Verlagen Franz Vahlen/M{\"u}nchen, Linde/Wien und St{\"a}mpfli/Bern}, pages = {81 -- 89}, year = {2017}, language = {de} } @article{HombGuigouCarterRabold2017, author = {Homb, Anders and Guigou-Carter, Catherine and Rabold, Andreas}, title = {Impact sound insulation of cross-laminated timber/massive wood floor constructions. Collection of laboratory measurements and result evaluation}, series = {Building Acoustics}, volume = {2017}, journal = {Building Acoustics}, number = {24/1}, pages = {35 -- 52}, year = {2017}, abstract = {Wooden building systems, including cross-laminated timber elements, are becoming more common. The last few years have seen new developments and documentation of innovative types of cross-laminated timber floor assemblies. Regarding impact sound associated to walking persons, running or jumping children, such floor assemblies can be regarded as a weak part. So far, there are no reliable standardized calculation models available, for prediction of impact sound in the entire frequency range. Therefore the design is always based upon previous experiences and available measurements. This article presents the results of a number of well controlled sound insulation measurements of cross-laminated timber/massive wood floor constructions conducted in laboratories. The collection of data and results analysis highlight some basic phenomena. For instance, how structural differences related to the grouping of the constructions change the frequency distribution of the impact sound level and the single number quantities. Another significant result is the influence of the dynamic stiffness of the resilient interlayer of floating floor systems and the mass per unit area of the floors. Based on this analysis, the aim is to identify similarities and carry out simplifications. The data will be further processed and used in the development of prediction models and optimization process of cross-laminated timber floor assemblies.}, language = {de} } @inproceedings{WenningerSchmidtGoeller2017, author = {Wenninger, Marc and Schmidt, Jochen and Goeller, Toni}, title = {Appliance Usage Prediction for the Smart Home with an Application to Energy Demand Side Management - And Why Accuracy is not a Good Performance Metric for this Problem.}, series = {6th International Conference on Smart Cities and Green ICT Systems (SMARTGREENS)}, booktitle = {6th International Conference on Smart Cities and Green ICT Systems (SMARTGREENS)}, year = {2017}, abstract = {Shifting energy peak load is a subject that plays a huge role in the currently changing energy market, where renewable energy sources no longer produce the exact amount of energy demanded. Matching demand to supply requires behavior Changes on the customerside, which can be achieved by incentives suchas Real-Time-Pricing (RTP). Various studies show that such incentives cannot be utilized without a complexity reduction, e.g., by smart home automation systems that inform the customer about possible savings or automatically schedule appliances to off-peak load phases. We propose a probabilistic appliance usage prediction based on historical energy data that can be used to identify the times of day where an appliance will be used and therefore make load shift recommendations that suite the customer's usage profile. A huge issue is how to provide a valid performance evaluation for this particular problem. We will argue why the commonly used accuracy metric is not suitable, and suggest to use other metrics like the area under the Receiver Operating Characteristic (ROC) curve, Matthews Correlation Coefficient (MCC) or F1-Score instead.}, language = {en} } @article{VersenErnstGulati2017, author = {Versen, Martin and Ernst, W. and Gulati, P.}, title = {A row hammer pattern analysis of DDR2 SDRAM}, series = {Microelectronics Reliability}, volume = {76-77}, journal = {Microelectronics Reliability}, pages = {64 -- 67}, year = {2017}, abstract = {A DDR2 SDRAM test setup implemented on the Griffin III ATE test system from HILEVEL Technologies is used to analyse the row hammer bug. Row hammer pattern experiments are compared to standard retention tests. The analysis confirms that the row hammer effect is caused by a charge excitation process depending on the number of stress activation cycles. The stress has to occur in the local neighborhood of the cells under test. Shallow impurity levels support the responsible charge carrier transport process in the used DDR2 SDRAM technology}, language = {en} } @article{ProdingerScheelSailerEscorpizoetal.2017, author = {Prodinger, Birgit and Scheel-Sailer, A. and Escorpizo, R. and Stucki, G.}, title = {UEMS-PRM ICF workshop moderators and rapporteurs. (2017) European initiative for the application of the International Classification of Functioning, Disability and Health: Development of Clinical Assessment Schedules for specified rehabilitation services}, series = {European Journal of physical and rehabilitation medicine}, volume = {53}, journal = {European Journal of physical and rehabilitation medicine}, number = {2}, pages = {319 -- 332}, year = {2017}, abstract = {Clinical assessment schedule (CLAS) is a core part of the ICF-based implementation of functioning reporting across health conditions and along the continuum of care. The Physical and Rehabilitation Medicine Section and Board of the European Union of Medical Specialists (UEMS PRM) workshop held in January 2016 aimed to develop and specify a CLAS within the context of rehabilitation services. UEMS PRM Workshop in Nottwil, Switzerland, January 2016.PRM physicians representatives from 12 European countries, as well as Israel and Japan, mostly delegates of UEMS PRM Section and Board, and experts with other rehabilitation professional backgrounds.Participants were divided into 6 working groups and asked to specify what functioning aspects would be essential to document using the available ICF sets for the identified rehabilitation services contained in the newly developed service classification (ICSO-R): acute, post-acute and long-term rehabilitation services. The 7 ICF Generic and 23 Rehabilitation Set categories were confirmed as well as specific health condition categories for acute rehabilitation services (mobile team), for postacute rehabilitation services (general outpatient rehabilitation, musculoskeletal and neurological rehabilitation, as well as specialized SCI rehabilitation), and for long-term rehabilitation services (day clinic and rehabilitation provided in the community). While general principles of the CLAS were defined, the need to align the CLAS for a specific service, as well as across services along the continuum of care was highlighted. All groups deliberated on this topic; however, no conclusive statement was presented yet.The groups recognized a need for a systematic effort to identify data collection tools currently used.CLASs will serve in the future to ensure that functioning information is systematically and consistently collected across services, and thus respond also to various global reports and initiatives which stress the need for improving data collection on people's functioning.}, language = {en} } @techreport{ChateauviexHellwigRaboldSchramm2017, author = {Ch{\^a}teauviex-Hellwig, Camille and Rabold, Andreas and Schramm, M.}, title = {Teilprojekt 4: Bauteilpr{\"u}fung, FEM Modellierung und Validierung.}, series = {ift-Forschungsbericht (Hsg.): Vibroakustik im Planungsprozess f{\"u}r Holzbauten - Modellierung, numerische Simulation, Validierung}, volume = {2017}, journal = {ift-Forschungsbericht (Hsg.): Vibroakustik im Planungsprozess f{\"u}r Holzbauten - Modellierung, numerische Simulation, Validierung}, year = {2017}, language = {de} } @inproceedings{RaboldChateauvieuxHellwigMecking2017, author = {Rabold, A. and Ch{\^a}teauvieux-Hellwig, C. and Mecking, S.}, title = {Optimierung von Holzdecken in Bezug auf die DIN 4109}, series = {Forum Holzbau HBS}, booktitle = {Forum Holzbau HBS}, year = {2017}, language = {de} } @article{PaoliniKollmannsbergerWinteretal.2017, author = {Paolini, Alexander and Kollmannsberger, Stefan and Winter, Christoph and Buchschmid, Martin and M{\"u}ller, Gerhard and Rabold, Andreas and Mecking, Simon and Schanda, Ulrich and Rank, Ernst}, title = {A high-order finite element model for vibration analysis of cross-laminated timber assemblies}, series = {Building Acoustics}, volume = {2017}, journal = {Building Acoustics}, number = {3}, edition = {24}, pages = {135 -- 158}, year = {2017}, abstract = {The vibration behavior of cross-laminated timber components in the low-frequency range can be predicted with high accuracy by the finite element method. However, the modeling of assembled cross-laminated timber components has been studied only scarcely. The three-dimensional p-version of the finite element method, which is characterized by hierarchic high-order shape functions, is well suited to consider coupling and support conditions. Furthermore, a small number of degrees of freedom can be obtained in case of thin-walled structures using p-elements with high aspect ratios and anisotropic ansatz spaces. In this article, a model for cross-laminated timber assemblies made of volumetric high-order finite elements is presented. Two representative types of connections are investigated, one with an elastomer between the cross-laminated timber components and the other without. The model is validated, and suitable ranges for the stiffness parameters of the finite elements which represent the junctions are identified.}, language = {en} } @techreport{SchutterBraun2017, author = {Schutter, Sabina and Braun, Magdalena}, title = {Herausforderungen von Kindertageseinrichtungen in einer vielf{\"a}ltigen Gesellschaft}, year = {2017}, abstract = {Zuwanderung, demografische Ver{\"a}nderungen und familialer Wandel betreffen alle gesellschaftlichen Bereiche und Akteure. Kindertageseinrichtungen als erste und wichtigste Bildungs- und Sozialisationsinstanzen nach den Eltern sind davon nicht ausgenommen. Im Gegenteil: Kinderarmut, Zeitknappheit von Familien, Migration und soziale Ungleichheiten kommen hier zuallererst an und stellen die Einrichtungen vor neue Herausforderungen. Hinzu kommen gesellschaftliche Bewegungen, wie der neu erstarkte Rechtspopulismus, gruppenbezogene Menschenfeindlichkeit und Abwertung bis zu Rechtsextremismus. Ein Ph{\"a}nomen, das in ostdeutschen Bundesl{\"a}ndern pr{\"a}senter ist. Die vorliegende Untersuchung hat deshalb 94 Leitungen von Kindertageseinrichtungen in Sachsen und Th{\"u}ringen nach ihren Umgangsweisen mit gesellschaftlicher Vielfalt gefragt. Hierzu wurde spezifisch der Umgang mit benachteiligten Gruppen und mit Diversit{\"a}t untersucht. 10 qualitative ExpertInneninterviews mit Einrichtungsleitungen wurden erg{\"a}nzend dazu durchgef{\"u}hrt, um spezifischen und sensiblen Fragestellungen auf den Grund zu gehen. Die wichtigsten Mittel gegen menschenfeindliche Tendenzen sind Demokratief{\"o}rderung, Demokratiebildung und Partizipation. Die Untersuchung hat deshalb einen Schwerpunkt auf die Untersuchung der Umsetzung und Hindernisse sowie der Bedarfe mit Blick auf Partizipation gelegt.}, language = {de} } @misc{Botzum2017, author = {Botzum, Edeltraud}, title = {Informierst du noch - oder l{\"a}sst du schon mitbestimmen? Ein Stufenmodell partizipativen Arbeitens.}, series = {Festakt der Hochschule Rosenheim zum Studienstart "Soziale Arbeit", Dezember 2017.}, journal = {Festakt der Hochschule Rosenheim zum Studienstart "Soziale Arbeit", Dezember 2017.}, year = {2017}, language = {de} } @incollection{BotzumEhlertHaeselerBestmannetal.2017, author = {Botzum, Edeltraud and Ehlert, Gudrun and H{\"a}seler-Bestmann, Sarah and Reimer, Julia}, title = {Warum Geschlecht z{\"a}hlt. Geschlechtsbezogene Aspekte im Promotionsprozess}, series = {Forschen und Promovieren in der Sozialen Arbeit, Band 15 der Reihe "Theorie, Forschung und Praxis der Sozialen Arbeit"}, booktitle = {Forschen und Promovieren in der Sozialen Arbeit, Band 15 der Reihe "Theorie, Forschung und Praxis der Sozialen Arbeit"}, editor = {Ehlert, Gudrun and Gahleitner, Silke Birgitta and K{\"o}ttig, Michaela and Sauer, Stefanie and Riemann, Gerhard and Schmitt, Rudolf and V{\"o}lter, Bettina}, edition = {1}, publisher = {Verlag Barbara Budrich}, address = {Berlin}, publisher = {Technische Hochschule Rosenheim}, pages = {102 -- 112}, year = {2017}, language = {de} } @article{BotzumKlaes2017, author = {Botzum, Edeltraud and Klaes, Sophie}, title = {Sozialr{\"a}umliches Lernen. Handlungsr{\"a}ume nutzen und einbeziehen.}, series = {KiTa aktuell NRW. Fachzeitschrift f{\"u}r Leitungen, Fachkr{\"a}fte und Tr{\"a}ger}, volume = {2017}, journal = {KiTa aktuell NRW. Fachzeitschrift f{\"u}r Leitungen, Fachkr{\"a}fte und Tr{\"a}ger}, number = {26/5}, publisher = {Carl Link Verlag}, address = {Kronach (Oberfranken)}, pages = {118 -- 120}, year = {2017}, abstract = {Zur Methodik einer zielgerichteten Evaluation der Vernetzung im Sozialraum: Zum Ausbau der sozialr{\"a}umlichen Vernetzung m{\"u}ssen Kitas zun{\"a}chst neben dem aktuellen Stand auch ermitteln, an welchen Stellen Verbesserungsbedarf besteht. Maßgebend f{\"u}r eine gewinnbringende Evaluation ist neben der Auswahl geeigneter Evaluationsmethoden die genaue Kl{\"a}rung der Evaluationsziele. Im Kita-Bereich erf{\"a}hrt Evaluation zunehmend an Bedeutung - aus politischen und professionsbezogenen Gr{\"u}nden. Theoretische Vor{\"u}berlegungen und Grundlagen sind weitgehend bekannt, sodass im folgenden Beitrag die Anwendung von Evaluation im sozialr{\"a}umlichen Arbeiten von Kitas fokussiert wird.}, language = {de} } @article{SelbGimiglianoProdingeretal.2017, author = {Selb, M. and Gimigliano, F. and Prodinger, Birgit and Stucki, G. and Pestelli, G. and Iocco, M. and Boldrini, P.}, title = {Toward an International Classification of Functioning, Disability and Health clinical data collection tool: The Italian experience of developing simple, intuitive descriptions of the Rehabilitation Set categories}, series = {European Journal of Physical and Rehabilitation Medicine}, volume = {53}, journal = {European Journal of Physical and Rehabilitation Medicine}, number = {2}, pages = {290 -- 298}, year = {2017}, abstract = {As part of international efforts to develop and implement national models including the specification of ICF-based clinical data collection tools, the Italian rehabilitation community initiated a project to develop simple, intuitive descriptions of the ICF Rehabilitation Set, highlighting the core concept of each category in user-friendly language. This paper outlines the Italian experience in developing simple, intuitive descriptions of the ICF Rehabilitation Set as an ICF-based clinical data collection tool for Italy.Consensus process.Expert conference. Multidisciplinary group of rehabilitation professionals.The first of a two-stage consensus process involved developing an initial proposal for simple, intuitive descriptions of each ICF Rehabilitation Set category based on descriptions generated in a similar process in China. Stage two involved a consensus conference. Divided into three working groups, participants discussed and voted (vote A) whether the initially proposed descriptions of each ICF Rehabilitation Set category was simple and intuitive enough for use in daily practice. Afterwards the categories with descriptions considered ambiguous i.e. not simple and intuitive enough, were divided among the working groups, who were asked to propose a new description for the allocated categories. These proposals were then voted (vote B) on in a plenary session. The last step of the consensus conference required each working group to develop a new proposal for each and the same categories with descriptions still considered ambiguous. Participants then voted (final vote) for which of the three proposed descriptions they preferred.Nineteen clinicians from diverse rehabilitation disciplines from various regions of Italy participated in the consensus process. Three ICF categories already achieved consensus in vote A, while 20 ICF categories were accepted in vote B. The remaining 7 categories were decided in the final vote.The findings were discussed in light of current efforts toward developing strategies for ICF implementation, specifically for the application of an ICF-based clinical data collection tool, not only for Italy but also for the rest of Europe. Promising as minimal standards for monitoring the impact of interventions and for standardized reporting of functioning as a relevant outcome in rehabilitation.}, language = {en} } @article{BotzumKlaes2017, author = {Botzum, Edeltraud and Klaes, Sophie}, title = {Evaluation im Kontext sozialr{\"a}umlichen Arbeitens}, series = {KiTa aktuell NRW. Fachzeitschrift f{\"u}r Leitungen, Fachkr{\"a}fte und Tr{\"a}ger}, volume = {2017}, journal = {KiTa aktuell NRW. Fachzeitschrift f{\"u}r Leitungen, Fachkr{\"a}fte und Tr{\"a}ger}, number = {26/9}, editor = {Jasmund, Christina}, publisher = {Carl Link Verlag}, address = {Kronach (Oberfranken)}, pages = {182 -- 185}, year = {2017}, language = {de} } @incollection{BoeningBotzum2017, author = {B{\"o}ning, Sarah-Lena and Botzum, Edeltraud}, title = {Was kann die Gesundheitswirtschaft von der Sozialen Arbeit lernen?}, series = {Neuvermessung der Gesundheitswirtschaft}, booktitle = {Neuvermessung der Gesundheitswirtschaft}, editor = {Matusiewicz, David and Muhrer-Schwaiger, Marco}, publisher = {Springer Gabler Verlag}, address = {Wiesbaden}, publisher = {Technische Hochschule Rosenheim}, pages = {231 -- 240}, year = {2017}, abstract = {Soziale Arbeit leistet einen Beitrag zu mehr sozialer Gerechtigkeit und zum Abbau sozialer Ungleichheit in der Gesellschaft, gleichzeitig gewinnt Gesundheit als Dimension sozialer Ungleichheit zunehmend an Bedeutung. Als Beispiele hierf{\"u}r k{\"o}nnen chronische Erkrankungen, Behinderung und Pflegebed{\"u}rftigkeit genannt werden, die h{\"a}ufig eine gleichberechtigte Teilhabe an der Gesellschaft erschweren, wodurch gesundheitliche Ungleichheit zu sozialer Ungleichheit f{\"u}hrt beziehungsweise diese verst{\"a}rkt. Fragestellungen zu Themen der Gesundheit haben demnach in vielf{\"a}ltiger Hinsicht auch Bezug auf Soziale Arbeit.}, language = {de} } @article{FeketePostBickenbachetal.2017, author = {Fekete, C. and Post, M. and Bickenbach, J. and Middleton, J. and Prodinger, Birgit and Selb, M. and Stucki, G.}, title = {A structured approach to capture the lived experience of spinal cord injury: Data model and questionnaire of the International Spinal Cord Injury Community Survey (InSCI)}, series = {American Journal of physical and rehabilitation medicine}, volume = {96}, journal = {American Journal of physical and rehabilitation medicine}, number = {2}, pages = {S5 -- S16}, year = {2017}, abstract = {The International Spinal Cord Injury (InSCI) community survey has been developed to collect internationally comparable data on the lived experience of persons with spinal cord injury (SCI) in all 6 WHO regions. The InSCI survey provides a crucial first step to generate evidence on functioning, health maintenance, and subjective well-being in persons with SCI globally. A major challenge in setting up the InSCI community survey was to develop a data model and questionnaire that comprehensively captures what matters to people and, at the same time, is feasible and parsimonious in terms of participant's burden. This paper outlines the components of the InSCI data model and presents the question selection to operationalize the data model along the 4 guiding principles of efficiency, feasibility, comparability, and truth and discrimination. The data model consists of 6 components operationalized with 125 questions including functioning (n = 28 body functions and structures; n = 42 activities and participation), contextual factors (n = 26 environmental; n = 19 personal factors), lesion characteristics (n = 2), and appraisal of health and well-being (n = 8). The InSCI questionnaire presents an efficient and feasible solution with satisfying comparability to other populations; however, its validity and reliability still needs to be confirmed.}, language = {en} } @article{SaalBeutnerBogunskietal.2017, author = {Saal, Susanne and Beutner, Katrin and Bogunski, Julia and Oberm{\"u}ller, Kathrin and M{\"u}ller, Martin and Grill, Eva and Meyer, Gabriele}, title = {Interventions for the prevention and treatment of disability due to acquired joint contractures in older people: a systematic review}, series = {Age and Ageing}, journal = {Age and Ageing}, number = {46}, editor = {Oxford Academic,}, year = {2017}, abstract = {Background acquired joint contractures have significant effects on quality of life and functioning. Objective to determine the effects of interventions to prevent and treat disabilities in older people with acquired joint contractures. Methods systematic search (last 8/2016) via Cochrane Library, PubMed, EMBASE, PEDro, CINAHL, trial registries, reference lists of retrieved articles and scientific congress pamphlets. Controlled and randomised controlled trials in English or German comparing an intervention with another intervention or standard care were included. Two independent researchers performed the selection of publications, data extraction and critical appraisal. Results seventeen studies with 992 participants met the inclusion criteria: 16 randomised controlled trials and 1 controlled trial (nursing homes = 4, community settings = 13). The methodological quality of the studies varied. Splints were examined in four studies, stretching exercises in nine studies, and ultrasound, passive movement therapy, bed-positioning and group exercise were each examined in one study. Studies on splints revealed inconclusive results regarding joint mobility or spasticity. Five of seven studies that assessed active stretching programmes for healthy older people reported statistically significant effects on joint mobility in favour of the intervention. Pain, quality of life, activity limitations and participation restrictions were rarely assessed. Conclusion the evidence for the effectiveness of interventions to prevent and treat disability due to joint contractures is weak, particularly for established nursing interventions such as positioning and passive movement. Better understanding is required regarding the delivery of interventions, such as their intensity and duration. In addition to functional issues, activities and social participation should also be studied as outcomes.}, language = {en} } @article{StuckiProdingerBickenbach2017, author = {Stucki, G. and Prodinger, Birgit and Bickenbach, J.}, title = {Four steps to follow when documenting functioning with the International Classification of Functioning, Disability and Health}, series = {European Journal of physical and rehabilitation medicine}, volume = {53}, journal = {European Journal of physical and rehabilitation medicine}, number = {1}, pages = {144 -- 149}, year = {2017}, abstract = {In this methodological note on applying the ICF in rehabilitation, we introduce suitable tools that allow us to document comprehensively and systematically the lived experience of health to guide clinical practice, the management of services, evidence-informed policy and scientific inquiry. The objective of this methodological note is to present the currently available tools with respect to four questions: 1) what ICF domains to document; 2) what perspective to take; 3) what data collection tools to apply; and 4) which approach to use for reporting. The application of these tools is illustrated using the Swiss Spinal Cord Injury (SwiSCI) Cohort Study. Existing ICF Sets provide a practical approach for identifying the domains to document. One can document from the perspective of biological health, lived health, and appraised health. For identifying suitable data collection tools, either existing tools can be linked to the ICF or available ICF-based data collection tools can be used. For reporting, an interval scale metric is suggested. The four step approach presented provides users with a logical sequence to follow when planning the documentation of functioning using the ICF as a health information reference system in practice and research.}, language = {de} } @article{AuerHusmannGillyetal.2017, author = {Auer, Veronika and Husmann, Kai and Gilly, Alexander and Zscheile, Matthias and Blendermann, Hans-Heinrich and Beitzen-Heineke, Ingrid}, title = {Bewertung der Buchenholz-Bereitstellungslogistik. Forschungsprojekt verdeutlicht Vorteile branchen{\"u}bergreifender Zusammenarbeit in der Holzbereitstellungskette.}, series = {Holz-Zentralblatt}, journal = {Holz-Zentralblatt}, year = {2017}, language = {de} }