@article{HoeslSchupfingerKlichetal.2023, author = {H{\"o}sl, Matthias and Schupfinger, Alexander and Klich, Luisa and Geest, Linda and Bauer, Petra and V. Bonfert, Michaela and Afifi, Faik K. and Nader, Sean and Berweck, Steffen}, title = {Relationship between kinematic gait quality and caregiver-reported everyday mobility in children and youth with spastic Cerebral Palsy}, series = {European Journal of Paediatric Neurology}, volume = {42}, journal = {European Journal of Paediatric Neurology}, pages = {88 -- 96}, year = {2023}, abstract = {Background: 3D gait analysis (3DGA) is a common assessment in Cerebral Palsy (CP) to quantify the extent of movement abnormalities. Yet, 3DGA is performed in laboratories and may thus be of debatable significance to everyday life. Aim The aim was to assess the relationship between kinematic gait abnormality and everyday mobility in ambulatory children and youth with spastic CP. Methods: 73 paediatric and juvenile patients with uni- or bilateral spastic CP (N = 21 USCP, N = 52, BSCP, age: 4-20 y, GMFCS I-III) underwent a 3DGA, while the MobQues47 Questionnaire quantified caregiver-reported mobility. We calculated the Gait Profile Score (GPS), a metric that summarizes how far the lower limb joint angles during walking deviate from those of matched controls. Results: The GPS correlated well with indoor and outdoor mobility (rho = -0.69 and -0.70, both p < 0.001) and the relationships were not significantly different for USCP and BSCP. Still, mobility was lower in BSCP (p < 0.001) and more compromised outdoors (p = 0.002). Indoor mobility could be predicted by walking speed, GPS and age (adj. R2 = 0.62). Outdoor mobility was best predicted by walking speed and GPS (adj. R2 = 0.60). The additive explained variance by the GPS was even higher outdoors than indoors (17.1\% vs. 11.4\%). Conclusions: Measuring movement deviations with 3DGA seems equally meaningful in uni- and bilaterally affected children and has considerable relevance for real-life ambulation, particurlarly outdoors, where children with spastic CP typically face greater difficulties. Therapeutic strategies that achieve faster walking and reduction of kinematic deviations may increase outdoor mobility.}, language = {en} } @inproceedings{HorstmannshoffKieselBorchersetal.2023, author = {Horstmannshoff, Caren and Kiesel, Theresia and Borchers, Peggy and D{\"o}ringer, Tobias and Bauer, Petra and Voigt, Karen and M{\"u}ller, Martin}, title = {Wirksamkeit und Sicherheit eines evidenzbasierten Versorgungspfades zur Verbesserung von Mobilit{\"a}t und Partizipation f{\"u}r {\"a}ltere Patient*innen mit Schwindel und Gleichgewichtsst{\"o}rungen (VDB) in der Prim{\"a}rversorgung: Eine multizentrische cluster-randomisierte kontrollierte Studie}, series = {Tag der Forschung TH Rosenheim}, booktitle = {Tag der Forschung TH Rosenheim}, year = {2023}, language = {de} } @inproceedings{KieselBreitwieserBrettneretal.2023, author = {Kiesel, Theresia and Breitwieser, Anita and Brettner, Stephanie and Schmidle, Stephanie and Bursch, Theresa and Freise, Laura and Schneider, Elena and K{\"o}lzer, Brigitte and Hammerschmidt, Thomas and Robert, Sebastian and Ittlinger, Sabine and Bauer, Petra}, title = {HERO - HEalth University @ TH ROsenheim F{\"o}rderkonzept zur Gewinnung und Entwicklung von wissenschaftlichem, insbesondere professoralem Personal}, series = {Tag der Forschung TH Rosenheim}, booktitle = {Tag der Forschung TH Rosenheim}, year = {2023}, language = {de} } @article{BotzumNeumaier2023, author = {Botzum, Edeltraud and Neumaier, Stefanie}, title = {K{\"u}nstliche Intelligenz und digitale Transformationsprozesse in der Lehre Sozialer Arbeit}, series = {Jugendhilfe}, volume = {61}, journal = {Jugendhilfe}, number = {5}, publisher = {Luchterhand}, address = {K{\"o}ln}, pages = {388 -- 394}, year = {2023}, language = {de} } @article{HorstmannshoffSkudlikPetermannetal.2023, author = {Horstmannshoff, Caren and Skudlik, Stefanie and Petermann, Jenny and Kiesel, Theresia and D{\"o}ringer, Tobias and Crispin, Alexander and Hermsd{\"o}rfer, Joachim and K{\"o}berlein‑Neu, Juliane and Jahn, Klaus and Sch{\"a}dler, Stefan and Bauer, Petra and Voigt, Karen and M{\"u}ller, Martin}, title = {Effectiveness of an evidence-based care pathway to improve mobility and participation in older patients with vertigo and balance disorders in primary care (MobilE-PHY2): study protocol for a multicentre cluster-randomised controlled trial}, series = {BMC Trials}, volume = {24}, journal = {BMC Trials}, pages = {91}, year = {2023}, abstract = {Background Vertigo, dizziness or balance disorders (VDB) are common leading symptoms in older people, which can have a negative impact on their mobility and participation in daily live, yet, diagnosis is challenging and specific treatment is often insufficient. An evidence-based, multidisciplinary care pathway (CPW) in primary care was developed and pilot tested in a previous study. The aim of the present study is to evaluate the effectiveness and safety of the CPW in terms of improving mobility and participation in community-dwelling older people with VDB in primary care. Methods For this multicentre cluster randomised controlled clinic trial, general practitioners (GP) will be recruited in two regions of Germany. A total of 120 patients over 60 years old with VDB will be included. The intervention is an algorithmized CPW. GPs receive a checklist for standardise clinical decision making regarding diagnostic screening and treatment of VDB. Physiotherapists (PT) receive a decision tree for evidence-based physiotherapeutic clinical reasoning and treatment of VDB. Implementation strategies comprises educational trainings as well as a workshop to give a platform for exchange for the GPs and PTs, an information meeting and a pocket card for home care nurses and informal caregivers and telephone peer counselling to give all participants the capability, opportunity and the motivation to apply the intervention. In order to ensure an optimised usual care in the control group, GPs get an information meeting addressing the national guideline. The primary outcome is the impact of VDB on participation and mobility of patients after 6 month follow-up, assessed using the Dizziness Handicap Inventory (DHI) questionnaire. Secondary outcomes are physical activity, static and dynamic balance, falls and fear of falling as well as quality of life. We will also evaluate safety and health economic aspects of the intervention. Behavioural changes of the participants as well as barriers, facilitating factors and mechanisms of impact of the implementation will be investigated with a comprehensive process evaluation in a mixed-methods design. Discussion With our results, we aim to improve evidence-based health care of community-dwelling older people with VDB in primary care.}, language = {en} } @article{BorchersHorstmannshoffKatzenbergeretal.2023, author = {Borchers, Peggy and Horstmannshoff, Caren and Katzenberger, Benedict and Petermann, Jenny and Bauer, Petra and Kiesel, Theresia and M{\"u}ller, Martin and Sanftenberger, Linda and Voigt, Karen}, title = {Verordnung und Inanspruchnahme von Physiotherapie bei Schwindel und/oder Gleichgewichtsst{\"o}rungen: Eine Sekund{\"a}ranalyse aus der Kohortenstudie MobilE-TRA (Versorgungspfade und ihre Auswirkung auf Mobilit{\"a}t, soziale Teilhabe und Lebensqualit{\"a}t bei Schwindel und Gleichgewichtsst{\"o}rungen sowie Gelenkerkrankungen)}, series = {Physioscience}, journal = {Physioscience}, year = {2023}, abstract = {Hintergrund Schwindel und/oder Gleichgewichtsst{\"o}rungen (S/G) sind komplexe Gesundheitsprobleme bei {\"a}lteren Menschen und h{\"a}ufige Beratungsanl{\"a}sse in der Hausarztpraxis. Physiotherapie kann einen positiven Einfluss auf das Gleichgewicht und Sturzrisiko bei Patient*innen mit S/G haben. In der S3-DEGAM-Leitlinie „Akuter Schwindel in der Hausarztpraxis" werden Empfehlungen f{\"u}r Physiotherapie bei bestimmten Schwindeldiagnosen gegeben. Ob haus{\"a}rztliche Physiotherapieverordnungen den Empfehlungen der Leitlinie entsprechen, ist nicht bekannt. Bisher liegen keine Daten vor, wie h{\"a}ufig diese Physiotherapieverordnungen tats{\"a}chlich durch Patient*innen in Anspruch genommen werden. Ziel Ermittlung von Anteil und Inanspruchnahme haus{\"a}rztlich verordneter Physiotherapie bei {\"a}lteren Patient*innen mit S/G innerhalb der Kohortenstudie MobilE-TRA und Untersuchung, ob diese den Empfehlungen der S3-DEGAM-Leitlinie entsprechen. Methode Die Sekund{\"a}ranalyse beruht auf Daten der Kohortenstudie MobilE-TRA, in der Patient*innen ab 65 Jahren mit S/G in 17 Hausarztpraxen in Bayern und Sachsen befragt wurden. Die Datenerhebung fand von 09/2017-10/2019 statt. Die haus{\"a}rztliche Verordnung und patientenseitige Inanspruchnahme von Physiotherapie wurden mittels validierten sowie selbstentwickelten Frageb{\"o}gen erhoben. Die Daten wurden deskriptiv (Mittelwerte, H{\"a}ufigkeiten) und Verteilungsunterschiede mittels exaktem Test nach Fisher analysiert. Ergebnisse Die Stichprobe umfasste 158 Patient*innen mit S/G. 16 \% der Patient*innen hatten aufgrund von S/G Physiotherapie verordnet bekommen. Dabei entsprachen 14,2 \% der Physiotherapieverordnungen den Empfehlungen der S3-DEGAM-Leitlinie. 32 \% (Bayern 53,8 \%; Sachsen 8,3 \%) der Patient*innen hatten die Physiotherapie nicht in Anspruch genommen. Dabei lag ein signifikanter regionaler Verteilungsunterschied (p = 0,030; Phi = 0,487 [95 \% KI = 0,129-0,846]) vor. Schlussfolgerung Mit 16 \% ist die H{\"a}ufigkeit haus{\"a}rztlicher Physiotherapieverordnungen bei S/G in der Altersgruppe der {\"u}ber 65-J{\"a}hrigen vergleichsweise hoch. Die Gr{\"u}nde f{\"u}r die Nichtinanspruchnahme wurden nicht erfasst, weshalb nur Vermutungen bez{\"u}glich des regionalen Unterschiedes angestellt werden konnten (z. B. Verf{\"u}gbarkeit von Physiotherapie). Im Sinne der Planung einer adh{\"a}renten Therapie und zur Vermeidung von Versorgungsunterschieden scheint es sinnvoll, sich zuk{\"u}nftig auch mit Gr{\"u}nden einer Nichtinanspruchnahme von Therapien zu besch{\"a}ftigen.}, language = {de} } @article{EikoetterReinersmann2023, author = {Eik{\"o}tter, Mirko and Reinersmann, Annika}, title = {Wirkung und Wirksamkeit am Beispiel des LWL-Budgets f{\"u}r Arbeit - Qualitative und quantitative Daten. Teil 2.}, series = {NDV}, volume = {103}, journal = {NDV}, number = {5}, publisher = {Verlag des Deutschen Vereins f{\"u}r {\"o}ffentliche und private F{\"u}rsorge e.V.}, address = {Berlin}, pages = {214 -- 220}, year = {2023}, language = {de} } @article{Eikoetter2023, author = {Eik{\"o}tter, Mirko}, title = {Die unbestimmten Rechtsbegriffe Wirkung und Wirksamkeit am Beispiel des Budgets f{\"u}r Arbeit - Ergebnisse einer qualitativen Befragung.}, series = {br}, volume = {62}, journal = {br}, number = {2}, publisher = {Boorberg}, address = {M{\"u}nchen}, pages = {34 -- 44}, year = {2023}, language = {de} } @techreport{vonBlumenthalHeHauptetal.2023, author = {von Blumenthal, Astrid and He, Miaomiao and Haupt, Thomas and Jungwirth, Johannes and Nemeth, Isabell and Stopper, Jochen}, title = {Optimierung der sektor{\"u}bergreifenden, regenerativen Energieversorgung in Quartieren - am Beispiel der Alfons-Bayerer-Straße in Regensburg}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:861-opus4-23649}, year = {2023}, language = {de} } @inproceedings{SeligerHonsa2023, author = {Seliger, Norbert and Honsa, Johannes}, title = {Time-variable Mutual Inductance for Enhanced Inductive Power Transmission}, series = {Proceedings International Symposium on Fundamentals of Electrical Engineering 2023 (ISFEE 2023)}, booktitle = {Proceedings International Symposium on Fundamentals of Electrical Engineering 2023 (ISFEE 2023)}, publisher = {IEEE}, address = {Bucharest, Romania}, isbn = {tbd}, pages = {5}, year = {2023}, abstract = {Enhanced inductive power transmission (IPT) between coaxially arranged circular coils is introduced by time-modulation of the mutual inductance. This modulation is accomplished by coherent switching of the short circuit current induced in a third loop. An analytical circuit model supporting the design for future time-modulated IPT systems is derived. We demonstrate an increase in load rms-voltage by 13\% (28\% gain in power) compared to an unmodulated transfer on an experimental system operating at fundamental frequencies ranging from 40kHz to 500kHz.}, language = {en} } @incollection{BotzumBornRauchenecker2023, author = {Botzum, Edeltraud and Born-Rauchenecker, Eva}, title = {Betreuung von Kleinstkindern. Qualit{\"a}t von Anfang an in Krippe, Kindergarten und Kita. 43. Lieferung, Naturerleben und naturwissenschaftliche Bildung f{\"u}r die Kleinsten, mit Impulsen zur Menschenrechtsbildung.}, series = {Betreuung von Kleinstkindern. Qualit{\"a}t von Anfang an in Krippe, Kindergarten und Kita.}, booktitle = {Betreuung von Kleinstkindern. Qualit{\"a}t von Anfang an in Krippe, Kindergarten und Kita.}, publisher = {Carl Link}, address = {K{\"o}ln/ Kronach}, publisher = {Technische Hochschule Rosenheim}, year = {2023}, language = {de} } @article{BotzumEmmerichLinsser2023, author = {Botzum, Edeltraud and Emmerich, Johannes and Linßer, Janine}, title = {Soziale Arbeit dual studieren. Doppelt gut oder Gefahr der Deprofessionalisierung?}, series = {Duales Studium. Personal in Hochschule und Betrieb gemeinsam entwickeln}, journal = {Duales Studium. Personal in Hochschule und Betrieb gemeinsam entwickeln}, number = {1(4)}, editor = {Arens-Fischer, Wolfgang and Dinkelborg-Ripperda, Katrin}, publisher = {Franz Steiner Verlag}, address = {Stuttgart}, pages = {43 -- 52}, year = {2023}, language = {de} } @article{EikoetterReinersmann2023, author = {Eik{\"o}tter, Mirko and Reinersmann, Annika}, title = {Wirkung und Wirksamkeit am Beispiel des LWL-Budgets f{\"u}r Arbeit - Qualitative und quantitative Daten. Teil 1.}, series = {NDV}, volume = {103}, journal = {NDV}, number = {4}, publisher = {Verlag des Deutschen Vereins f{\"u}r {\"o}ffentliche und private F{\"u}rsorge e.V.}, address = {Berlin}, pages = {156 -- 161}, year = {2023}, language = {de} } @incollection{BotzumEikoetter2023, author = {Botzum, Edeltraud and Eik{\"o}tter, Mirko}, title = {Betreuung von Kleinstkindern. Qualit{\"a}t von Anfang an in Krippe, Kindergarten und Kita. 42. Lieferung, Rechtsgrundlagen und Arbeitsrecht in der Kita}, series = {Betreuung von Kleinstkindern. Qualit{\"a}t von Anfang an in Krippe, Kindergarten und Kita}, booktitle = {Betreuung von Kleinstkindern. Qualit{\"a}t von Anfang an in Krippe, Kindergarten und Kita}, publisher = {Carl Link}, address = {K{\"o}ln/ Kronach}, publisher = {Technische Hochschule Rosenheim}, year = {2023}, language = {de} } @misc{OPUS4-2151, title = {KiTa aktuell spezial 2/2023: Personalpolitik in der Kita}, volume = {2023}, number = {2}, editor = {Botzum, Edeltraud and Eik{\"o}tter, Mirko}, publisher = {Carl Link}, address = {K{\"o}ln/ Kronach}, year = {2023}, language = {de} } @misc{OPUS4-2362, title = {Personalpolitik im Kindergarten}, series = {KiTa aktuell {\"O}sterreich}, volume = {11.}, journal = {KiTa aktuell {\"O}sterreich}, number = {03/2023}, editor = {Botzum, Edeltraud and Eik{\"o}tter, Mirko}, publisher = {Carl Link}, address = {K{\"o}ln/ Kronach}, pages = {38}, year = {2023}, language = {de} } @book{ErnstSchmidtBeneken2023, author = {Ernst, Hartmut and Schmidt, Jochen and Beneken, Gerd}, title = {Grundkurs Informatik: Grundlagen und Konzepte f{\"u}r die erfolgreiche IT-Praxis - Eine umfassende, praxisorientierte Einf{\"u}hrung}, edition = {8}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {9783658417789}, doi = {10.1007/978-3-658-41779-6}, publisher = {Technische Hochschule Rosenheim}, pages = {915}, year = {2023}, abstract = {Das Buch bietet eine umfassende und praxisorientierte Einf{\"u}hrung in die wesentlichen Grundlagen und Konzepte der Informatik. Es umfasst den Stoff, der typischerweise in den ersten Semestern eines Informatikstudiums vermittelt wird, vertieft Zusammenh{\"a}nge, die dar{\"u}ber hinausgehen und macht sie verst{\"a}ndlich. Die Themenauswahl orientiert sich an der langfristigen Relevanz f{\"u}r die praktische Anwendung. Praxisnah und aktuell werden die Inhalte f{\"u}r Studierende der Informatik und verwandter Studieng{\"a}nge sowie f{\"u}r im Beruf stehende Praktiker vermittelt.}, language = {de} } @book{Schmidt2023, author = {Schmidt, Jochen}, title = {Grundkurs Informatik - Das {\"U}bungsbuch: 163 Aufgaben mit L{\"o}sungen}, edition = {3}, publisher = {Springer Vieweg}, address = {Wiesbaden}, isbn = {978-3658434427}, doi = {10.1007/978-3-658-43443-4}, publisher = {Technische Hochschule Rosenheim}, pages = {216}, year = {2023}, abstract = {Das Buch richtet sich an Studierende der Informatik oder verwandter Studieng{\"a}nge und enth{\"a}lt {\"U}bungsaufgaben mit L{\"o}sungen aus Gebieten, die typischerweise in den ersten Semestern als Grundlagen behandelt werden. Ausgenommen ist der Bereich des Programmierens. Das Buch erg{\"a}nzt den Grundkurs Informatik mit {\"U}bungen zu ausgew{\"a}hlten Kapiteln, ist aber auch in Kombination mit anderen Lehrb{\"u}chern verwendbar.}, language = {de} } @article{Fieber2023, author = {Fieber, Andreas}, title = {Nachhaltigkeitsberichterstattung - Mut zur L{\"u}cke}, series = {UmweltBriefe}, volume = {2023}, journal = {UmweltBriefe}, number = {M{\"a}rz}, publisher = {WALHALLA Fachverlag}, address = {Regensburg}, pages = {8}, year = {2023}, abstract = {Die Nachhaltigkeitsziele der Bundesregierung, die sie in der Deutschen Nachhaltigkeitsstrategie 2021 formuliert hat, sind ohne die Kommunen hierzulande nicht zu erreichen. Als eine der ersten bayerischen Kommunen unter 5 000 Einwohner hat nun die Gemeinde Pfaffing einen Nachhaltigkeitsbericht ver{\"o}ffentlicht. Die l{\"a}ndlich gepr{\"a}gte Gemeinde im Landkreis Rosenheim erstreckt sich auf einer Fl{\"a}che von 35 km². Die Kommune gliedert sich auf in die drei gr{\"o}ßeren Orte Pfaffing, Forsting und Rettenbach - insgesamt gibt es 71 Ortsteile. Ein Praxisbericht}, language = {de} } @article{WerningSchaper2023, author = {Werning, Hanno and Schaper, Jens}, title = {"Nichttragende Brandw{\"a}nde" - Zuordnung und Nachweism{\"o}glichkeiten unter MVV TB}, series = {Bauprodukte Aktuell}, volume = {7}, journal = {Bauprodukte Aktuell}, number = {6}, publisher = {RM Rudolf M{\"u}ller Medien GmbH \& Co.KG}, address = {K{\"o}ln}, pages = {1 -- 8}, year = {2023}, abstract = {Der Beitrag behandelt den Umgang mit sogenannten "nichttragenden Brandw{\"a}nden" im deutschen Bauordnungsrecht. Mit der Umstellung von der fr{\"u}heren Bauregelliste (BRL) auf die (Muster) Verwaltungsvorschrift Technische Baubestimmungen (MVV TB) wurde diesen die Grundlage f{\"u}r die Erteilung allgemeiner bauaufsichtlicher Pr{\"u}fzeugnisse und die erforderliche Zuordnung der bauaufsichtlichen Anforderungen zu Leistungsangaben in Anwendbarkeitsnachweisen entzogen. Es wird die M{\"o}glichkeit der "Verzichtserkl{\"a}rung" der obersten Bauaufsichtsbeh{\"o}rden vorgestellt.}, language = {de} } @article{Werning2023, author = {Werning, Hanno}, title = {Ge{\"a}nderte Zuordnungstabellen f{\"u}r Brandverhalten „nichtbrennbar" und „schwerentflammbar"}, series = {FeuerTrutz Magazin}, volume = {2023}, journal = {FeuerTrutz Magazin}, number = {4}, publisher = {RM Rudolf M{\"u}ller Medien GmbH \& Co.KG}, address = {K{\"o}ln}, pages = {24 -- 29}, year = {2023}, abstract = {Der Artikel stellt die tats{\"a}chlichen {\"A}nderungen der Zuordnungstabellen f{\"u}r das Brandverhalten von Baustoffen bei Klassifizierung nach EN 13501-1 seit MVV TB 2023/1 vor. Insbesondere wird auf die neue Begrenzung des Wertes TSP 600s bei Klassifizierung auf Grundlage von EN 13823 Ausgabe 2020 oder j{\"u}nger bei den bauaufsichtlichen Anforderungen "nichtbrennbar" oder "schwerentflammbar und geringer Rauchentwicklung" eingegangen.}, language = {de} } @article{WerningStich2023, author = {Werning, Hanno and Stich, Florian}, title = {Nachhaltigkeitsbewertung von Bauprodukten und Bauwerken - „Zuwachs" bei der CE-Kennzeichnung}, series = {Bauprodukte Aktuell}, volume = {7}, journal = {Bauprodukte Aktuell}, number = {5}, publisher = {RM Rudolf M{\"u}ller Medien GmbH \& Co.KG}, address = {K{\"o}ln}, pages = {1 -- 10}, year = {2023}, abstract = {Der Beitrag geht auf den Umgang mit der Grundanforderung (BWR) 7 "Nachhaltige Nutzung nat{\"u}rlicher Ressourcen" der BauPVO in der CE-Kennzeichnung von Bauprodukten ein und zeigt die Verbindung zwischen den Nachhaltigkeitskennwerten der Bauprodukte mit der Nachhaltigkeitsbewertung von Bauwerken auf.}, language = {de} } @article{Werning2023, author = {Werning, Hanno}, title = {{\"A}nderungen der Zuordnungstabellen f{\"u}r Brandverhalten - Folgen f{\"u}r die Technische Isolierung}, series = {TI Technische Isolierung}, volume = {5}, journal = {TI Technische Isolierung}, number = {4}, publisher = {RM Rudolf M{\"u}ller Medien GmbH \& Co.KG}, address = {K{\"o}ln}, pages = {14 -- 19}, year = {2023}, abstract = {Der Artikel beschreibt die {\"A}nderungen der Zuordnungstabellen f{\"u}r das Brandverhalten von Baustoffen bei Klassifizierung nach EN 13501-1, speziell aus dem Blick der Technischen Isolierung. Hierbei ist insbesondere zwischen "linearen Rohrd{\"a}mmstoffen" und D{\"a}mmstoffen als "sonstige Bauprodukte" zu unterscheiden.}, language = {de} } @article{Werning2023, author = {Werning, Hanno}, title = {Flussidagramm f{\"u}r Zuordnung des Brandverhaltens zu „nichtbrennbar" f{\"u}r EN 13501-1 seit MVV TB 2023/1}, series = {Bauprodukte Aktuell}, volume = {7}, journal = {Bauprodukte Aktuell}, number = {5}, publisher = {RM Rudolf M{\"u}ller Medien GmbH \& Co.KG}, address = {K{\"o}ln}, pages = {11 -- 12}, year = {2023}, abstract = {Der Beitrag zeigt eine M{\"o}glichkeit zu einer systematischen Vorgehensweise zur Zuordnung des Brandverhaltens von Baustoffen zur bauaufsichtlichen Anforderung "Nichtbrennbar" bei Klassifizierung des Brandverhaltens nach EN 13501-1 seit MVV TB 2023/1 auf.}, language = {de} } @incollection{BotzumEikoetter2023, author = {Botzum, Edeltraud and Eik{\"o}tter, Mirko}, title = {Kinderschutz - Rechtliche Grundlagen f{\"u}r die Kita-Leitung, 44. Lieferung}, series = {Betreuung von Kleinstkindern. Qualit{\"a}t von Anfang an in Krippe, Kindergarten und Kita}, booktitle = {Betreuung von Kleinstkindern. Qualit{\"a}t von Anfang an in Krippe, Kindergarten und Kita}, publisher = {Carl Link}, address = {K{\"o}ln/ Kronach}, publisher = {Technische Hochschule Rosenheim}, year = {2023}, language = {de} } @article{BahlBerger2023, author = {Bahl, Eva and Berger, Yvonne}, title = {Processes of South-South Migration in Their Historical Context: Biographical Case Studies from Brazil and China}, series = {Historical Social Research / Historische Sozialforschung}, volume = {48}, journal = {Historical Social Research / Historische Sozialforschung}, number = {4}, publisher = {GESIS -Leibniz Institute for the Social Sciences}, doi = {10.12759/hsr.48.2023.47}, pages = {248 -- 282}, year = {2023}, abstract = {This article examines interweaving collective histories in different formerly colonized regions of the world: 1. Migratory movements from the territory of the former Ottoman Empire to the Americas, specifically to Brazil, and 2. transregional migration between different regions within China. On the basis of empirical data, we discuss sociological biographical research as an approach to analyzing migration and social mobility as transgenerational processes. In the case of Syrians in Brazil who have fled from the civil war, these processes are reflected in transnational family structures, transgenerational mandates, and knowledge transmission. In the case of domestic migration within China, the "mission" that families give their children is social advancement through education (e.g., Crabb 2010; Fong 2004). In the context of anti-Western discourses in China, it can be demonstrated that postcolonial discourses are functional in the effort to regain former international strength and national prosperity, and that discourses on "becoming a modern citizen" pervade family aspirations. The article is intended as a plea for i) taking a closer look at historical and contemporary South-South relations, and ii) situating current migration movements historically. It ties into global historical and sociological debates on "shared/common histories" and "intertwined histories."}, language = {en} } @article{KunklerKellner2023, author = {Kunkler, Jan and Kellner, Florian}, title = {Sustainable City Evaluation Using the Database for Estimation of Road Network Performance}, series = {Sustainability}, volume = {15}, journal = {Sustainability}, number = {1}, doi = {10.3390/su15010733}, pages = {733}, year = {2023}, abstract = {This article introduces the Database for Estimation of Road Network Performance (DERNP) to enable wide-scale estimation of relevant Road Network Performance (RNP) factors for major German cities. The methodology behind DERNP is based on a randomized route sampling procedure that utilizes the Worldwide Harmonized Light Vehicles Test Procedure (WLTP) in combination with the tile-based HERE Maps Traffic API v7 and a digital elevation model provided by the European Union's Earth Observation Programme Copernicus to generate a large set of independent and realistic routes throughout OpenStreetMap road networks. By evaluating these routes using the PHEMLight5 framework, a comprehensive list of RNP parameters is estimated and translated into polynomial regression models for general usage. The applicability of these estimations is demonstrated based on a case study of four major German cities. This case study considers network characteristics in terms of detours, infrastructure, traffic congestion, fuel consumption, and CO2 emissions. Our results show that DERNP and its underlying randomized route sampling methodology overcomes major limitations of previous wide-scale RNP approaches, enabling efficient, easy-to-use, and region-specific RNP comparisons.}, language = {en} } @inproceedings{Stanzel2023, author = {Stanzel, Silke}, title = {Analyse studentischer Fehlvorstellungen mittels des Force Concept Inventory - Item Response Curves im internationalen Vergleich}, series = {PhyDid B - Didaktik der Physik - Beitr{\"a}ge zur DPG-Fr{\"u}hjahrstagung 2023, Hannover}, booktitle = {PhyDid B - Didaktik der Physik - Beitr{\"a}ge zur DPG-Fr{\"u}hjahrstagung 2023, Hannover}, number = {1}, pages = {51 -- 57}, year = {2023}, abstract = {Das Force Concept Inventory ist ein international etabliertes Diagnoseinstrument f{\"u}r das Konzeptverst{\"a}ndnis der Newtonschen Mechanik. Wir haben {\"u}ber einen Zeitraum von zehn Jahren von knapp 5000 Studierenden der Ingenieurwissenschaften an der TH Rosenheim zu Studienbeginn Testdaten erhoben. Die Auswertung mittels Item Response Curves erlaubt f{\"u}r jede Frage die Analyse sowohl der richtigen als auch aller falschen Antwortoptionen. Insbesondere lassen sich auf diese Weise Distraktoren identifizieren, die g{\"a}ngige Fehlvorstellungen widerspiegeln. Es zeigt sich, dass die am h{\"a}ufigsten gew{\"a}hlten Distraktoren auf der Annahme beruhen, jeder Bewegung m{\"u}sse eine Kraft in Bewegungsrichtung zu Grunde liegen. Daten von Universit{\"a}ten der USA zeigen ein vergleichbares Ergebnis. Die vorgestellte Analyse dient als Grundlage zur Verbesserung von Lehrsequenzen.}, language = {de} } @incollection{HagemannHenslerFigueiredoeSilvaetal.2023, author = {Hagemann, Steffen and Hensler, Ana-Sophie and Figueiredo e Silva, Rosaline Cristina and Tsikos, Harilaos}, title = {Light Stable Isotope (O, H, C) Signatures of BIF-Hosted Iron Ore Systems: Implications for Genetic Models and Exploration Targeting}, series = {Isotopes in Economic Geology, Metallogenesis and Exploration}, booktitle = {Isotopes in Economic Geology, Metallogenesis and Exploration}, editor = {Huston, David and Gutzmer, Jens}, publisher = {Springer}, address = {Cham}, doi = {10.1007/978-3-031-27897-6_12}, publisher = {Technische Hochschule Rosenheim}, pages = {373 -- 397}, year = {2023}, abstract = {Stable isotope data from hypogene (i.e., below the line of weathering) iron oxides and gangue minerals from BIF-hosted iron ore deposits in Australia, South Africa, and Brazil have significantly assisted in constraining different hydrothermal fluid sources and fluid flow models during the upgrade of BIF to iron ore. The δ18O values on iron oxides from BIF and different paragenetic stages of enrichment display a consistent decrease from unenriched BIF (4-9 per mille) to as low as -10 per mille for high-grade iron ore. This large shift in oxygen isotope values is interpreted as evidence for enormous incursion of 'ancient' meteoric water into fault and fracture zones at the time of iron enrichment during the Archean and Paleoproterozoic time. The δ18Ofluid values of paragenetically early iron oxides of > 4 per mille suggest the involvement of magmatic fluids in greenstone belt-hosted Caraj{\´a}s-type iron ore deposits, and basinal brines in basin-hosted Hamersley-type deposits. In contrast, the paragenetically late stage iron oxides in the metamorphosed, basin hosted iron ore deposits of the Quadril{\´a}tero Ferr{\´i}fero display δ18Ofluid values > 6 per mille. This reflects the renewed deep crustal, hypogene (metamorphic or magmatic) fluid influx. Carbon and oxygen isotope data on carbonates in BIF and hydrothermally altered iron ore indicate that carbon in the latter is not derived from BIF units, but represents either magmatic carbon in the case of the Caraj{\´a}s-type deposits or carbon within the underlying basin stratigraphy as in the case of the Hamersley-type iron deposits. The systematic decrease of δ18O values in iron oxides from the early to late paragenetic stages and from the distal to proximal alteration zone, including the ore zone, may be used as a geochemical vector. In this case, oxygen isotope analyses on iron oxides provide a potential exploration tool, particularly for targeting the extension of iron ore bodies or entirely concealed high-grade iron ore deposits, in which hematite/magnetite are frequently the only mineral that can be readily analysed.}, language = {en} } @article{BleyHeindl2023, author = {Bley, Sandra and Heindl, Johanna}, title = {Ingenieurp{\"a}dagogik an der Technischen Hochschule Rosenheim. - eine Laufbahn im beruflichen Lehramt die mit der Liebe zum Holz beginnt}, series = {BAG Report}, volume = {2023}, journal = {BAG Report}, number = {02}, organization = {BAG Bau-Holz-Farbe e.V.}, pages = {20 -- 29}, year = {2023}, abstract = {Die Technische Hochschule Rosenheim ist {\"u}berregional bekannt f{\"u}r Ihre Expertise im Fachbereich Holz und Bau. Nach dem Vorbild des kooperativen Modells der Hochschule Landshut in Kooperation mit der TU M{\"u}nchen implementierte die TH Rosenheim im Jahr 2020 den Studiengang Ingenieurp{\"a}dagogik f{\"u}r den Fachbereich Bautechnik mit der Option Holztechnik als Unterrichtsfach. Der Beitrag skizziert Motive, Strukturelemente sowie erste Entwicklungen. Dabei lassen erste deskriptive Ergebnisse die Hoffnung zu, dass sich {\"u}ber das Modell neue Zielgruppen f{\"u}r eine Karriere im Lehramt an beruflichen Schulen generieren lassen. Besonders auff{\"a}llig f{\"u}r das Rosenheimer Modell ist die Bedeutsamkeit der Polyvalenz sowie das Interesse an einer praxisnahen Ausbildung rund um den Werk- und Baustoff Holz.}, language = {de} } @inproceedings{BotzumBleyHolzetal.2023, author = {Botzum, Edeltraud and Bley, Sandra and Holz, Sybille and Neumaier, Stefanie and D{\"o}rr, M.}, title = {Projektbasiert lehren - kompetenzorientiert pr{\"u}fen: Implementierung von E-Portfolios als Pr{\"u}fungsleistung am Beispiel interdisziplin{\"a}rer studentischer Projekte.}, series = {Analog | Digital | Integriert: Kompetenzorientiertes Pr{\"u}fen der Zukunft.}, booktitle = {Analog | Digital | Integriert: Kompetenzorientiertes Pr{\"u}fen der Zukunft.}, year = {2023}, language = {de} } @inproceedings{KortuemBoehm2023, author = {Kort{\"u}m, Christian and B{\"o}hm, Stefan-Andreas}, title = {Holistic approach for geometric and technological similarity search in the production for profiled elements in the wood working industry for a more efficient production}, series = {Proceedings of the 25th International Wood Machining Seminar}, booktitle = {Proceedings of the 25th International Wood Machining Seminar}, editor = {Schajer, Gary}, pages = {9}, year = {2023}, abstract = {In the whole field of woodworking, from carpentry to industry, new products are created and designed every day and manufacturers wonder if similar workpieces have already been produced in the company and if corresponding drawings, information, tools, jigs, etc. can be reused. Under certain circumstances, considerable duplication of work can be avoided and a more efficient production is possible. In order to find similar workpieces, it must be clarified what exactly is meant by similarity. The different fields of knowledge do not provide a clear definition. However, similarities are always used to compare objects. In woodworking, objects can be a wide variety of components and products, such as carcase sides, furniture fronts, fittings, tools or profile strips. The search for similar profiled elements - related to the potential, data structure and algorithms - is the focus of this paper. There is a wide range of different profiled elements, which are used constructively as well as decoratively, e.g. for baseboards, door frames, window frames or decorative moulding profiles. These profiles are manufactured in a multi-stage production process in which the workpieces are first machined with profiled tools before surface finishing takes place. Along this production chain, tools, machine settings and, in some cases, fixtures are used that are adapted to the respective profile and can be reused for the same or similar jobs. Inheritance of information offers the greatest potential of similarity search. Inheritance means that existing knowledge in the form of drawings, CNC programs, process parameters and setup specifications, etc., is transferred from existing profiles to a new profile. By inheriting existing information, for example, the effort required for process setting can be reduced by adopting spindle positions, positions of guides and stops, or feed and cutting speeds. However, this can only be done if the process knowledge and other technological information concerning a profile are sufficiently documented. This is the only way how all information is made available for the similarity search and inheritance, and also for setting the processes when the profile is manufactured once again. The profile data must therefore be stored in a meaningful structure without loss of information. Therefore, a holistic product data model was developed that combines the geometrical with the technological profile data. The developed model allows a combined search for geometrically and e.g. materially similar products - also with a weighted evaluation of the individual criteria. The research has shown that data modelling is the essential foundation for the implementation of modern AI algorithms to enable similarity search. In conclusion, the use of a search system for geometrically and technologically similar profiles represents a real innovation for wood processing companies. This paper presents a holistic approach for geometrical and technological similarity search presenting different algorithms}, language = {en} } @inproceedings{BoehmKortuem2023, author = {B{\"o}hm, Stefan-Andreas and Kort{\"u}m, Christian}, title = {Machining Feature Recognition in Furniture Parts based on a Graph Neural Network}, series = {Proceedings of the 25th International Wood Machining Seminar}, booktitle = {Proceedings of the 25th International Wood Machining Seminar}, editor = {Schajer, Gary}, pages = {8}, year = {2023}, abstract = {Due to the increasing customer demands, companies face the challenge of adapting their manufacturing facilities to produce batch size one parts. In this context, each component comes with specific customer requirements, significantly increasing the complexity of its manufacturing process. Traditional process planning done by employees is no longer feasible in the face of the growing complexity and diversity of batch size one parts. Therefore, there is a need for novel computer-aided process planning methods capable of autonomously learning and identifying the necessary machining features of these parts. We propose a configurable automated feature recognition framework tailored to batch size one parts to address this need. This framework comprises two main components. First, a customizable data generator is developed to create a dataset of computer-aided design models incorporating user-specific machining features. Second, a graph neural network is employed to learn these user-specific machining features by leveraging the graph structure represented by the vertices and edges in each computer-aided design model. We evaluate the effectiveness of our framework using a real-world example from the furniture industry. Specifically, we construct a dataset comprising over 7000 computer-aided design models of wooden boards using our framework's data generator. Each wooden board contains up to 30 randomly placed machining features for the application of connectors and fittings, randomly selected from 14 standard machining features commonly used in the furniture industry. An optimization algorithm adapts a graph neural network for classifying these specific machining features. The results demonstrate that our framework addresses the automated feature recognition problem without requiring data conversions, such as pixels or voxels, as other approaches often do. By introducing this configurable automated feature recognition framework, we solve the challenges posed by batch size one manufacturing. The framework's effectiveness and accuracy are demonstrated through extensive testing on the example of the furniture industry, showcasing its potential for enhancing manufacturing processes in various domains}, language = {en} } @inproceedings{BinningerKortuemScholz2023, author = {Binninger, Karsten and Kort{\"u}m, Christian and Scholz, Frieder}, title = {Investigation of tool wear of the trimming unit and resulting quality in the edgebanding process}, series = {Proceedings of the 25th International Wood Machining Seminar}, booktitle = {Proceedings of the 25th International Wood Machining Seminar}, editor = {Schajer, Gary}, pages = {9}, year = {2023}, abstract = {The edgebanding process, i.e. the covering of the raw edge of the laminated particleboard by means of decorative plastic or real wood veneer bands, is an important process step in the manufacture of furniture components. The quality of the final product is significantly influenced by this production step. The manufacturing process step within the edgebanding machine begins with the milling of the raw edge. The quality of the edgebanding process is determined by a large number of process input variables, such as the tool used and the cutting geometry, the type of laminate used for the wood-based material, adhesives, etc. The quality of the edgebanding process is also determined by the type of material processed. Particularly with regard to the materials, the increased use of recycled wood in the particleboard sector and different types of adhesives (with reduced formaldehyde emissions) results in increased demands on the milling process. Due to this developments, most of the earlier investigations (in the years 1990 - 2000) are not comparable with today's general conditions. The mechanical and optical properties of the edge applied to the end product are decisively influenced by the quality of this joint. The milling technology used, as well as the tool used for this purpose and its condition, is a decisive influencing factor in the formation of quality. Tests on the indication of various influencing variables in the edgebanding process at the Rosenheim Technical University of Applied Sciences showed that in the case of chipboard milling, a decrease in the electrical power required for the cutting process can take place with increasing tool wear. It was also demonstrated that previous process steps in furniture production, such as panel dividing by means of sawing or milling/nesting, generally have a significantly different influence on the subsequent joining process during edge banding process. Furthermore, a direct correlation was determined between the mechanical properties of the end product and the condition of the tool used, which can be used as a measurable indicator. In addition to the effect of the tool condition on the mechanical properties of the edge banding, this also has an impact on the optical quality characteristics. Accordingly, it could be demonstrated here that an increase in the size and number of chippings takes place in the laminate of the board material to be processed.}, language = {en} } @inproceedings{LeiterDietlmeierWohlschlaegeretal.2023, author = {Leiter, Nina and Dietlmeier, Maximilian and Wohlschl{\"a}ger, Maximilian and L{\"o}der, Martin G.J. and Versen, Martin and Laforsch, Christian}, title = {Development of a Neural Network for Automatic Classification of Post-Consumer Wood Using Rapid-FLIM}, series = {2023 IEEE Sensors Applications Symposium (SAS)}, booktitle = {2023 IEEE Sensors Applications Symposium (SAS)}, doi = {10.1109/SAS58821.2023.10254174}, pages = {1 -- 6}, year = {2023}, abstract = {The economic use of wood is a growing sector, not only because of the significant advantage of wood to retain CO 2 . It is crucial to increase the material recycling of wood in several lifecycles, but currently, there is no reliable post-consumer wood sorting technique in line. This research measures 365 post-consumer wood samples of classes A1-4 four times with the frequency domain fluorescence lifetime imaging microscopy (FD-FLIM) subset method rapid fluorescence lifetime imaging microscopy (Rapid-FLIM). The data is analyzed on their statistical features. Four neural networks based on Multilayer perceptron are then trained and tested with twelve statistical features extracted from the Rapid-FLIM images. The best model for this application contains the optimizer RMSprop, the activation function SELU and the loss function binary crossentropy. The best model of this structure could achieve a false positive ratio of 4.79 \% over the ten folds.}, language = {en} } @inproceedings{ThomasSaleemLeiteretal.2023, author = {Thomas, Amal and Saleem, Shaif and Leiter, Nina and Dietlmeier, Maximilian and Wohlschl{\"a}ger, Maximilian and Versen, Martin and Laforsch, Christian and Schwarz, Jonas and Auer, Veronika and Risse, Michael}, title = {Frequency Domain Fluorescence Lifetime Imaging Microscopy (FD-FLIM) analysis of Quercus robur samples for origin differentiation purposes}, series = {Optica Sensing Congress 2023}, booktitle = {Optica Sensing Congress 2023}, year = {2023}, abstract = {The fast classification and identification of plastics presents a significant challenge. The study assesses the suitability of a Multilayer Perceptron to classify and identify commonly found plastic types using Rapid-FLIM, achieving an accuracy of 88.33\%. @inproceedingsSchwarz:23, Increasing demand for wood products requires methods to determine its harvest origin and ensure sustainable and legal sourcing. In 15 out of 21 cases, the origin of Quercus robur was differentiable in FD-FLIM studies.}, language = {en} } @inproceedings{WohlschlaegerKhanLeiteretal.2023, author = {Wohlschl{\"a}ger, Maximilian and Khan, Yamna and Leiter, Nina and Versen, Martin and L{\"o}der, Martin and Laforsch, Christian}, title = {Combining BLOB-Detection and MLP to Detect and Identify Plastics in an Environmental Matrix}, series = {2023 IEEE Sensors Applications Symposium (SAS)}, booktitle = {2023 IEEE Sensors Applications Symposium (SAS)}, doi = {10.1109/SAS58821.2023.10254171}, pages = {1 -- 5}, year = {2023}, abstract = {Environmental pollution by plastics is an increasing problem. However, state-of-the-art methods have significant disadvantages in detecting and identifying plastics directly in an environmental matrix. In this study, we propose a blob detection algorithm in combination with a neural network for fast and automated identification of plastics and non-plastics in a single fluorescence lifetime image. Therefore an artificial environmental matrix is prepared that contains soil, grass, spruce and HDPE (high density polyethylene) particles. Several FD-FLIM (frequency domain fluorescence lifetime imaging microscopy) images are taken, and the detection algorithm and the neural network are applied. We successfully demonstrated the suitability of the thresholding algorithm and the binary classification of the HDPE particles directly in the environmental matrix.}, language = {en} } @article{ManiyattuGeegyWohlschlaegeretal.2023, author = {Maniyattu, Georgekutty Jose and Geegy, Eldho and Wohlschl{\"a}ger, Maximilian and Leiter, Nina and Versen, Martin and Laforsch, Christian}, title = {Multilayer Perceptron Development to Identify Plastics Using Fluorescence Lifetime Imaging Microscopy}, series = {EDFA Technical Articles}, volume = {25}, journal = {EDFA Technical Articles}, number = {3}, doi = {10.31399/asm.edfa.2023-3.p031}, pages = {31 -- 37}, year = {2023}, abstract = {Existing plastic analysis techniques such as Fourier transform infrared spectroscopy and Raman spectroscopy are problematic because samples must be anhydrous and identification can be hindered by additives. This article describes a new approach that has been successfully demonstrated in which plastics can be classified by neural networks that are trained, validated, and tested by frequency domain fluorescence lifetime imaging microscopy measurements.}, language = {en} } @inproceedings{SchwarzWohlschlaegerLeiteretal.2023, author = {Schwarz, Jonas and Wohlschl{\"a}ger, Maximilian and Leiter, Nina and Auer, Veronika and Risse, Michael and Versen, Martin}, title = {Frequency Domain Fluorescence Lifetime Imaging Microscopy (FD-FLIM) analysis of Quercus robur samples for origin differentiation purposes}, series = {Optica Sensing Congress 2023 (AIS, FTS, HISE, Sensors, ES)}, booktitle = {Optica Sensing Congress 2023 (AIS, FTS, HISE, Sensors, ES)}, doi = {10.1364/AIS.2023.JTu4A.10}, year = {2023}, abstract = {Increasing demand for wood products requires methods to determine its harvest origin and ensure sustainable and legal sourcing. In 15 out of 21 cases, the origin of Quercus robur was differentiable in FD-FLIM studies.}, language = {en} } @inproceedings{LeiterWohlschlaegerDietlmeieretal.2023, author = {Leiter, Nina and Wohlschl{\"a}ger, Maximilian and Dietlmeier, Maximilian and Versen, Martin and L{\"o}der, Martin and Laforsch, Christian}, title = {Comparative Analysis of Fluorescence Properties of Post-Consumer Wood Using FD-FLIM}, series = {2023 IEEE Sensors Applications Symposium (SAS)}, booktitle = {2023 IEEE Sensors Applications Symposium (SAS)}, doi = {10.1109/SAS58821.2023.10254052}, pages = {1 -- 6}, year = {2023}, abstract = {The FD-FLIM technique has a high potential for automated post-consumer wood sorting. A problem of analysing post-consumer wood fluorescence properties is the uncertainty of the post-consumer wood category as the origin of the samples are unknown. In this study, the fluorescence properties of actual post-consumer wood is compared with prepared wood samples. The post-consumer wood samples display slightly different fluorescence intensities and lifetimes due to environmental influences and a higher sample diversity. For improved training of evaluation algorithms for post-consumer wood sorting, the prepared sample set should be extended or the post-consumer wood should be additionally analysed in the laboratory.}, language = {en} } @inproceedings{ThomasSaleemLeiteretal.2023, author = {Thomas, Amal and Saleem, Shaif and Leiter, Nina and Dietlmeier, Maximilian and Wohlschl{\"a}ger, Maximilian and Versen, Martin and Laforsch, Christian}, title = {Development of a Neural Network for an Automated Differentiation of Plastics using Rapid-FLIM}, series = {Optica Sensing Congress 2023}, booktitle = {Optica Sensing Congress 2023}, doi = {10.1364/ES.2023.EW4E.5}, year = {2023}, abstract = {The fast classification and identification of plastics presents a significant challenge. The study assesses the suitability of a Multilayer Perceptron to classify and identify commonly found plastic types using Rapid-FLIM, achieving an accuracy of 88.33\%.}, language = {en} } @inproceedings{WohlschlaegerLeiterDietlmeieretal.2023, author = {Wohlschl{\"a}ger, Maximilian and Leiter, Nina and Dietlmeier, Maximilian and L{\"o}der, Martin G.J. and Versen, Martin and Laforsch, Christian}, title = {Comparison of Two Classification Methods Trained with FD-FLIM Data to Identify and Distinguish Plastics from Environmental Materials}, series = {2023 International Joint Conference on Neural Networks (IJCNN)}, booktitle = {2023 International Joint Conference on Neural Networks (IJCNN)}, doi = {10.1109/IJCNN54540.2023.10191054}, pages = {1 -- 9}, year = {2023}, abstract = {Previous research on identifying plastic types and differentiating plastics from environmental material is promising by utilizing the specific fluorescence lifetime, but the evaluation still has to be automated. Therefore, an automated Gaussian analysis is developed for evaluating frequency-domain fluorescence lifetime images of plastics and environmental materials. Furthermore, we applied a "Multilayer Perceptron" and "Random Forest Classifier" to the data resulting from the Gaussian analysis of the frequency domain fluorescence lifetime imaging microscopy data. The classification results show high F1-scores, whereby the best "Multilayer Perceptron" and "Random Forest Classifier" achieved an F1-score of 90\%. Thus, identifying and differentiating plastics and environmental materials is possible by applying a "Multilayer Perceptron" or "Random Forest Classifier" to the Gaussian-analyzed imaged fluorescence lifetime data.}, language = {en} } @inproceedings{WohlschlaegerKhanLeiteretal.2023, author = {Wohlschl{\"a}ger, Maximilian and Khan, Yamna and Leiter, Nina and Versen, Martin and L{\"o}der, Martin and Laforsch, Christian}, title = {Development of a BLOB-detection algorithm based on DoG to detect Plastic in an environmental matrix using FD-FLIM}, series = {Optica Sensing Congress 2023 (AIS, FTS, HISE, Sensors, ES)}, booktitle = {Optica Sensing Congress 2023 (AIS, FTS, HISE, Sensors, ES)}, doi = {10.1364/ES.2023.EW4E.4}, year = {2023}, abstract = {The direct identification of plastics in an environmental matrix is heavily researched. We successfully developed a BLOB-detection algorithm based on differences of Gaussians to identify HDPE particles in an artificial environmental matrix using FD-FLIM.}, language = {en} } @book{HaglKingZentgraf2023, author = {Hagl, Rainer and King, Frank A. and Zentgraf, Peter}, title = {Ingenieurinformatik}, edition = {2}, publisher = {Carl Hanser Verlag GmbH \& Co. KG}, address = {M{\"u}nchen}, doi = {10.3139/9783446477308}, publisher = {Technische Hochschule Rosenheim}, pages = {410}, year = {2023}, abstract = {Umfassende Programmierkenntnisse werden f{\"u}r Ingenieur:innen immer wichtiger, vor allem im Bereich der Produktentwicklung. Die Autoren erkl{\"a}ren die Grundlagen der Ingenieurinformatik beispielhaft anhand von MATLAB, Simulink und Stateflow. Neben den Grundkenntnissen lernen Leser:innen auch die Vorteile von MATLAB im Vergleich zu anderen Programmiersprachen kennen und anzuwenden. Die dabei vorgestellten Zusammenh{\"a}nge und Prinzipien sind allgemeing{\"u}ltig und lassen sich daher auch problemlos auf andere Programmiersprachen {\"u}bertragen. Konkrete Beispiele und Problemstellungen aus der Ingenieurpraxis werden vorgestellt und L{\"o}sungsans{\"a}tze aufgezeigt. Das Lehrbuch richtet sich an Studierende aller ingenieurwissenschaftlichen Studieng{\"a}nge. Es eignet sich besonders f{\"u}r die Bachelorausbildung in den Studienschwerpunkten Elektro- und Informationstechnik, Mechatronik, Maschinenbau, Automatisierungstechnik sowie Energie- und Geb{\"a}udetechnik. F{\"u}r die zweite Auflage wurde das Lehrbuch umfassend {\"u}berarbeitet und an die aktuellen Programmversionen angepasst. Weitere {\"U}bungen mit L{\"o}sungen sowie Hinweise zur Erstellung eigener Apps und Programmbeispiele stehen auf plus.hanser-fachbuch.de zur Verf{\"u}gung. Der auf dem Cover abgebildete Programmcode und die animierte Rakete wurden im Projekt „water rocket" an der Technischen Hochschule Rosenheim im Jahr 2021 unter der Leitung von Prof. Zentgraf entwickelt. Die Projekt-Unterlagen und der zugeh{\"o}rige Filmbeitrag k{\"o}nnen unter www.th-rosenheim.de/rt-WaterRocket eingesehen werden.}, language = {de} } @inproceedings{SchoepferMayrSchandaetal.2023, author = {Sch{\"o}pfer, Fabian and Mayr, Andreas R. and Schanda, Ulrich and Bayer, Jeremias}, title = {Analysis of measured transmission functions in timber buildings}, series = {Proceedings of Forum Acusticum 2023}, booktitle = {Proceedings of Forum Acusticum 2023}, year = {2023}, language = {en} } @article{RaboldMarxtSchanda2023, author = {Rabold, Andreas and Marxt, Michaela and Schanda, Ulrich}, title = {Geeignete Beurteilungsgr{\"o}ßen f{\"u}r die Luftschalld{\"a}mmung von Haustrennw{\"a}nden - Bewertung der Schalld{\"a}mmung bei {\"u}blichen Wohnger{\"a}uschen}, series = {Bauphysik}, volume = {45}, journal = {Bauphysik}, number = {1}, doi = {10.1002/bapi.202200038}, pages = {21 -- 34}, year = {2023}, language = {de} } @inproceedings{SchandaHoffbauerLachenmayr2023, author = {Schanda, Ulrich and Hoffbauer, Elias and Lachenmayr, Winfried}, title = {Detektion von Flatterechos mittels der Autokorrelationsfunktion der Raumimpulsantwort}, series = {Fortschritte der Akustik - DAGA}, booktitle = {Fortschritte der Akustik - DAGA}, organization = {Deutsche Gesellschaft f{\"u}r Akustik e.V.}, year = {2023}, language = {de} } @inproceedings{SchandaDullinger2023, author = {Schanda, Ulrich and Dullinger, Sandra}, title = {Variationen raumakustischer Messungen in einem Unterrichtsraum}, series = {Fortschritte der Akustik - DAGA}, booktitle = {Fortschritte der Akustik - DAGA}, organization = {Deutsche Gesellschaft f{\"u}r Akustik e.V.}, year = {2023}, language = {de} } @inproceedings{ParzingerSchanda2023, author = {Parzinger, Michael and Schanda, Ulrich}, title = {Analysis of spectra for sound insulation using methods of mathematical statistics and AI - first approaches}, series = {Proceedings of Forum Acusticum 2023}, booktitle = {Proceedings of Forum Acusticum 2023}, year = {2023}, abstract = {Within the framework of a research focus at the TH Rosenheim on prediction methods for sound and impact sound insulation in timber constructions, methods of mathematical statistics and artificial intelligence are applied to sound insulation. To estimate the potential of those methods, one-third octave band spectra of measured sound insulation of sand-lime brickwork have been analyzed first. On selected data sets for certain building constructions, physically based calculation approaches according to the \backslashDIN{} series of standards, are compared with purely statistical methods such as GAMLSS (Generalized Additive Models for Location, Scale and Shape Parameters). The parameters derived from these procedures can be used for prediction purposes. The interval estimators resulting from these methods are compared. In addition, methods to classify the separating construction based on measurements are discussed. Thereby, in situ, measurements are used in addition to laboratory measurements.}, language = {en} } @inproceedings{KruseSchoepferSchandaetal.2023, author = {Kruse, Tobias and Sch{\"o}pfer, Fabian and Schanda, Ulrich and Mayr, Andreas R.}, title = {Input data for the prediction of noise from technical equipment using a heat pump}, series = {Proceedings of Forum Acusticum 2023}, booktitle = {Proceedings of Forum Acusticum 2023}, year = {2023}, language = {en} } @inproceedings{KruseMayrSchoepferetal.2023, author = {Kruse, Tobias and Mayr, Andreas R. and Sch{\"o}pfer, Fabian and Schanda, Ulrich}, title = {Kennwerte f{\"u}r die schalltechnische Prognose von geb{\"a}udetechnischen Anlagen am Beispiel einer W{\"a}rmepumpe}, series = {Fortschritte der Akustik - DAGA}, booktitle = {Fortschritte der Akustik - DAGA}, organization = {Deutsche Gesellschaft f{\"u}r Akustik e.V.}, year = {2023}, language = {de} } @inproceedings{HierlSchandaSchoepferetal.2023, author = {Hierl, Robin and Schanda, Ulrich and Sch{\"o}pfer, Fabian and Weise, Yvonne}, title = {Experimental development of a timber floor system with improved impact sound insulation in the low-frequency range}, series = {Proceedings of Forum Acusticum 2023}, booktitle = {Proceedings of Forum Acusticum 2023}, year = {2023}, language = {en} } @inproceedings{ParzingerSchanda2023, author = {Parzinger, Michael and Schanda, Ulrich}, title = {Analyse von Spektren zur Schalld{\"a}mmung mittels Methoden der KI - erste Ans{\"a}tze}, series = {Fortschritte der Akustik - DAGA}, booktitle = {Fortschritte der Akustik - DAGA}, organization = {Deutsche Gesellschaft f{\"u}r Akustik e.V.}, year = {2023}, language = {de} } @article{WerningUdoJoachim2024, author = {Werning, Hanno and Udo-Joachim, Meyer}, title = {Brandschutztechnische Einstufung von Mauerwerk}, series = {Bauprodukte Aktuell}, volume = {8}, journal = {Bauprodukte Aktuell}, number = {1}, publisher = {RM Rudolf M{\"u}ller Medien GmbH \& Co.KG}, address = {K{\"o}ln}, pages = {1 -- 12}, year = {2024}, abstract = {Der Artikel behandelt die Nachweisf{\"u}hrung zum Feuerwiderstand von Mauerwerks-Bauteilen. Es werden die m{\"o}glichen bauaufsichtlichen Anforderungen an Standsicherheit und/oder Raumabschluss im Brandfall, die m{\"o}gliche Nachweisf{\"u}hrung {\"u}ber Bauarten als technische Baubestimmungen oder Bauarten mit Anwendbarkeitsnachweis, die Zuordnung der bauaufsichtlichen Anforderungen zu den Leistungsangaben in den Nachweisen und die Grundlagen der brandschutztechnischen Bemessung von Mauerwerksbauteilen diskutiert.}, language = {de} } @misc{OPUS4-2374, title = {KiTa aktuell spezial 1/2024: Resilienz im Fokus: Kinder f{\"o}rdern, Teams st{\"a}rken}, volume = {2024}, number = {1}, editor = {Botzum, Edeltraud and Neumann, Susanne}, publisher = {Carl Link}, address = {K{\"o}ln/ Kronach}, year = {2024}, language = {de} } @misc{Hoepfl2024, author = {H{\"o}pfl, Felix}, title = {Ideenwerkstatt: KI in der Hochschullehre - Persona-Konzept mit bildgebender KI in der Vorlesung}, editor = {H{\"o}pfl, Felix}, doi = {10.13140/RG.2.2.29379.00808}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:861-opus4-23833}, pages = {1 -- 13}, year = {2024}, abstract = {Beitrag zur Ideenwerkstatt Hochschullehre der Virtuellen Hochschule Bayern (VHB) zum Themenkomplex "KI in der Hochschullehre". Gegenstan des Beitrages ist die Verwendung bildgebender KI im unmittelbaren Unterrichtsgeschehen in dem ein Persona-Konzept (Design-Thinking) durch ein KI-generiertes Portr{\"a}t pers{\"o}nlicher und wirksamer wird. Die Veranstaltung fand am 29.02.2024 online im Rahmen des bundesweiten Projekts "Konzertierte Weiterbildungen zu k{\"u}nstlicher Intelligenz in der Hochschullehre" des Netzwerks Landeseinrichtungen f{\"u}r digitale Hochschullehre (NeL) statt und wurde von der Stiftung Innovation in der Hochschullehre gef{\"o}rdert. Das Video kann auch auf Youtube abgerufen werden: https://youtu.be/JCaUWryiEjs}, subject = {KI; Persona; Design-Thinking}, language = {de} } @article{AslanKubik2024, author = {Aslan, Alp and Kubik, Veit}, title = {Buildup and Release from Proactive Interference: The Forward Testing Effect in Children's Spatial Memory}, series = {Journal of Experimental Child Psychology}, volume = {240}, journal = {Journal of Experimental Child Psychology}, publisher = {Elsevier}, doi = {10.1016/j.jecp.2023.105838}, year = {2024}, abstract = {Previous work has indicated that testing can enhance memory for subsequently studied new information by reducing proactive interference from previously studied information. Here, we examined this forward testing effect in children's spatial memory. Kindergartners (5-6 years) and younger (7-8 years) and older (9-10 years) elementary school children studied four successively presented 3 x 3 arrays, each composed of the same 9 objects. The children were asked to memorize the locations of the objects that differed across the four arrays. Following presentation of each of the first three arrays, memory for the object locations of the respective array was tested (testing condition) or the array was re-presented for additional study (restudy condition). Results revealed that testing Arrays 1 to 3 enhanced children's object location memory for Array 4 relative to restudying. Moreover, children in the testing condition were less likely to confuse Array 4 locations with previous locations, suggesting that testing reduces the buildup of proactive interference. Both effects were found regardless of age. Thus, the current findings indicate that testing is an effective means to resolve proactive interference and, in this way, to enhance children's learning and remembering of spatial information even before the time of school entry.}, language = {en} } @inproceedings{SeligerHelmbrecht2024, author = {Seliger, Norbert and Helmbrecht, Cordula}, title = {A high-frequency performance and degradation study of adhesive conductive EMI shielding tapes during High-Temperature Storage}, series = {Proccedings CIPS 2024 - 13th International Conference on Integrated Power Electronics Systems}, booktitle = {Proccedings CIPS 2024 - 13th International Conference on Integrated Power Electronics Systems}, publisher = {VDE VERLAG GMBH}, address = {D{\"u}sseldorf}, isbn = {978-3-8007-6288-0}, issn = {0341-3934}, pages = {297 -- 303}, year = {2024}, abstract = {The variation of the contact impedance of adhesive conductive EMI shielding tapes under high temperature storage (HTS) of 110degC is investigated. The adhesive tapes under test are implemented as signal return paths in microstrip lines. Changes in the ground plane impedance by adhesive deterioration are analyzed by S-parameter measurements from 1MHz to 3GHz. A circuit model for contact impedance degradation is proposed and applied in simulation of board level shielding. Contact resistance and contact capacitance are found to increase significantly after 2400h, causing a declined magnetic field shielding effectiveness by 30 dB below 500 MHz.}, language = {en} } @book{Huber2024, author = {Huber, Johannes}, title = {Kinder brauchen Bindung}, edition = {1. Auflage}, publisher = {Kohlhammer}, address = {Stuttgart}, isbn = {978-3-17-037990-9}, publisher = {Technische Hochschule Rosenheim}, year = {2024}, abstract = {Eine stabile, sichere Bindung zwischen Kindern und ihren Bezugspersonen, seien es Mutter, Vater, Großeltern oder p{\"a}dagogische Fachkr{\"a}fte, ist grundlegend f{\"u}r ihre Entwicklung. Welche Faktoren f{\"u}r eine sichere Bindungsbeziehung ausschlaggebend sind und wie Bezugspersonen die Grundbed{\"u}rfnisse nach Beziehung, Bindung und Kontrolle in den ersten Lebensjahren erf{\"u}llen k{\"o}nnen, zeigt das Buch: Wie gehe ich feinf{\"u}hlig mit meinem Kind um, das noch nicht sprechen kann? Kann sich der Vater genauso gut um einen S{\"a}ugling k{\"u}mmern wie die Mutter? Schadet eine Betreuung in der Krippe? Der Band bietet Grundlagenwissen aus der internationalen Entwicklungsforschung sowie Beispiele und Reflexionsimpulse f{\"u}r die Umsetzung im Erziehungsalltag. Abgeschlossen wird er mit einer {\"U}bersicht zu bindungstheoretischen Pr{\"a}ventionsprogrammen in Familienbildung und Fr{\"u}hen Hilfen.}, language = {de} } @article{BotzumHeinzBornRauchenecker2024, author = {Botzum, Edeltraud and Heinz, Jana and Born-Rauchenecker, Eva}, title = {Die Zukunftsstudie Kita-Management aus Expertinnensicht}, series = {Zukunftsstudie Kita-Management 2024 - Digitalisierung im Leitungsalltag}, journal = {Zukunftsstudie Kita-Management 2024 - Digitalisierung im Leitungsalltag}, publisher = {Wolters Kluwer}, pages = {15 -- 21}, year = {2024}, language = {de} } @article{SchmiedtCramer2024, author = {Schmiedt, Anja Bettina and Cramer, Erhard}, title = {Generalized Ng-Kundu-Chan model of adaptive progressive Type-II censoring and related inference}, series = {Naval Research Logistics (NRL)}, volume = {71}, journal = {Naval Research Logistics (NRL)}, number = {3}, doi = {10.1002/nav.22152}, pages = {389 -- 415}, year = {2024}, abstract = {The model of adaptive progressive Type-II censoring introduced by Ng et al. (2009) (referred to as Ng-Kundu-Chan model) is extended to allow switching from a given initial censoring plan to any arbitrary given plan of the same length. In this generalized model, the joint distribution of the failure times and the corresponding likelihood function is derived. It is illustrated that the computation of maximum likelihood and Bayesian estimates are along the same lines as for standard progressive Type-II censoring. However, the distributional properties of the estimators will usually be different since the censoring plan actually applied in the (generalized) Ng-Kundu-Chan model is random. As already mentioned in Cramer and Iliopoulos (2010), we directly show that the normalized spacings are independent and identically exponentially distributed. However, it turns out that the spacings themselves are generally dependent with mixtures of exponential distributions as marginals. These results are used to study linear estimators. Finally, we propose an algorithm for generating random numbers in the generalized Ng-Kundu-Chan model and present some simulation results. The results obtained also provide new findings in the original Ng-Kundu-Chan model; the corresponding implications are highlighted.}, language = {en} } @article{SchmiedtWeiss2024, author = {Schmiedt, Anja Bettina and Weiß, Christian}, title = {The pair correlation function of multi-dimensional low-discrepancy sequences with small stochastic error terms}, series = {Journal of Number Theory}, volume = {259}, journal = {Journal of Number Theory}, doi = {10.1016/j.jnt.2023.12.011}, pages = {422 -- 437}, year = {2024}, abstract = {In any dimension d≥2, there is no known example of a low-discrepancy sequence which possesses Poisssonian pair correlations. This is in some sense rather surprising, because low-discrepancy sequences always have β-Poissonian pair correlations for all 0<β<1/d and are therefore arbitrarily close to having Poissonian pair correlations (which corresponds to the case β=1/d). In this paper, we further elaborate on the closeness of the two notions. We show that d-dimensional Kronecker sequences for badly approximable vectors α→ with an arbitrary small uniformly distributed stochastic error term generically have β=1/d-Poissonian pair correlations.}, language = {en} } @techreport{Seidlmeier2024, author = {Seidlmeier, Heinrich}, title = {Process organization design by networks}, doi = {10.13140/RG.2.2.12369.13920}, pages = {24}, year = {2024}, abstract = {Organizational mining, a sub-discipline of process mining, introduced social networks based on business processes. However, process mining has only half-heartedly pursued this line of development. In particular, the well-founded results of interdisciplinary social network analysis have hardly been taken up. This article shows how the explanation and design of the phenomenon "organization" can benefit from the further development of this network view of business processes. To this end, the basic idea of social process networks is presented and the current state of research is outlined. Furthermore, social networks are presented as a new component of organization design. An interesting, far-reaching new field of research is expected. This paper presents three novel findings that could be the starting point for further research, but can also be used in practice today.}, language = {en} } @incollection{BotzumEikoetter2024, author = {Botzum, Edeltraud and Eik{\"o}tter, Mirko}, title = {Kinderrechte und Kinderschutz: Praxisnahe Einblicke und Handlungsimpulse f{\"u}r das Kita-Team, 45. Lieferung}, series = {Betreuung von Kleinstkindern. Qualit{\"a}t von Anfang an in Krippe, Kindergarten und Kita}, booktitle = {Betreuung von Kleinstkindern. Qualit{\"a}t von Anfang an in Krippe, Kindergarten und Kita}, publisher = {Carl Link}, address = {K{\"o}ln/ Kronach}, publisher = {Technische Hochschule Rosenheim}, year = {2024}, language = {de} } @article{FischerMichalkHardtetal.2024, author = {Fischer, Markus and Michalk, Wibke and Hardt, Cornelius and Bogenberger, Klaus}, title = {Bill It Right: Evaluating Public Charging Station Usage Behavior under the Presence of Different Pricing Policies}, series = {World Electric Vehicle Journal}, volume = {15}, journal = {World Electric Vehicle Journal}, number = {4}, doi = {10.3390/wevj15040175}, year = {2024}, abstract = {This study investigates for the first time how public charging infrastructure usage differs under the presence of diverse pricing models. About 3 million charging events from different European countries were classified according to five different pricing models (cost-free, flat-rate, time-based, energy-based, and mixed) and evaluated using various performance indicators such as connection duration; transferred energy volumes; average power; achievable revenue; and the share of charging and idle time for AC, DC, and HPC charging infrastructure. The study results show that the performance indicators differed for the classified pricing models. In addition to the quantitative comparison of the performance indicators, a Kruskal-Wallis one-way analysis of variance and a pairwise comparison using the Mann-Whitney-U test were used to show that the data distributions of the defined pricing models were statistically significantly different. The results are discussed from various perspectives on the efficient design of public charging infrastructure. The results show that time-based pricing models can improve the availability of public charging infrastructure, as the connection duration per charging event can be roughly halved compared to other pricing models. Flat-rate pricing models and AC charging infrastructure can support the temporal shift of charging events, such as shifting demand peaks, as charging events usually have several hours of idle time per charging process. By quantifying various performance indicators for different charging technologies and pricing models, the study is relevant for stakeholders involved in the development and operation of public charging infrastructure.}, language = {en} } @article{NiemannSchanda2024, author = {Niemann, Anne and Schanda, Ulrich}, title = {Einfach Bauen und Schallschutz - ein Konflikt?}, series = {Bauphysik}, volume = {46}, journal = {Bauphysik}, number = {2}, doi = {10.1002/bapi.202400011}, pages = {84 -- 94}, year = {2024}, abstract = {In der Diskussion um bezahlbares Bauen werden aktuell die Standards im Wohnungsbau hinterfragt, darunter auch die Schallschutzanforderungen. Die Wahrnehmung von Schallschutz ist subjektiv und wird von verschiedenen Faktoren wie Alter und individuellen Empfindlichkeiten beeinflusst. Nachbarschaftsl{\"a}rm kann zu Schlafst{\"o}rungen und Bel{\"a}stigungen f{\"u}hren, w{\"a}hrend Verkehrsl{\"a}rm nachweislich Gesundheitsprobleme verursacht. Das Konzept „Einfach Bauen" zielt darauf ab, das Bauen zu vereinfachen und nachhaltiger zu gestalten. Drei Forschungsh{\"a}user, die diesem Konzept folgen, wurden auf Schallschutz {\"u}berpr{\"u}ft. Dabei erf{\"u}llten Wohnungstrennw{\"a}nde und -decken die Anforderungen. Die Untersuchung der Bewohnerzufriedenheit durch Befragungen in diesen H{\"a}usern zeigt, dass die Wahrnehmung von L{\"a}rm stark variiert. Die Zufriedenheit wird durch die Kommunikation mit den Nachbarn beeinflusst. Das Fallbeispiel verdeutlicht, dass Schallschutzanforderungen oft nicht den individuellen L{\"a}rmempfinden gerecht werden, da nicht-akustische Faktoren eine starke Rolle spielen. Die Erwartung eines reduzierten Schallschutzes bei „Einfach Bauen" kann zu Fehlvorstellungen f{\"u}hren, wie der Auszug von Bewohnern aus Schallschutzgr{\"u}nden zeigt. Die derzeitigen Mindestanforderungen an den Schallschutz erweisen sich f{\"u}r sehr empfindsame Menschen als unzureichend. Es ist wichtig, dass die Bewohner {\"u}ber den zu erwartenden Schallschutz informiert werden, um ein harmonisches Zusammenleben zu erm{\"o}glichen.}, language = {de} } @incollection{LueftlKardasKerresetal.2024, author = {L{\"u}ftl, Katharina and Kardas, Leopold and Kerres, Andrea and Wissing, Christiane}, title = {Anleitungsmethodik f{\"u}r die praktische Pflegeausbildung. Ist-Stand und Bedarfe f{\"u}r eine pflegedidaktische Fundierung}, series = {Handbuch Pflegedidaktik I}, booktitle = {Handbuch Pflegedidaktik I}, editor = {Br{\"u}he, Roland and von Gahlen-Hoops, Wolfgang}, publisher = {UTB}, address = {Stuttgart}, publisher = {Technische Hochschule Rosenheim}, pages = {39 -- 59}, year = {2024}, abstract = {Dieser Beitrag konzentriert sich auf Methoden der Praxisanleitung. Da im deutschsprachigen Raum eine Tendenz zur Methodeneinseitigkeit bzw. zur schwerpunktm{\"a}ßigen Anwendung der Instruktion anzutreffen ist, wird zun{\"a}chst pflegedidaktisch der Bedarf nach einem Methodenmix sowie der Bedarf nach Methoden zur F{\"o}rderung selbst{\"a}ndigen Probleml{\"o}sens begr{\"u}ndet. Dann wird der Frage nachgegangen, welche Methoden f{\"u}r die Praxisanleitung im deutschsprachigen Raum und international in der Literatur beschrieben werden. Diese werden jeweils in einem Mehrebenenmodell der Methodik systematisiert und verglichen. Vor diesem Hintergrund werden pflegedidaktische Forschungsdesiderate und weitere Empfehlungen formuliert, um die Praxisanleitung im deutschsprachigen Raum methodisch weiterzuentwickeln und dadurch Lernende bestm{\"o}glich f{\"u}r die professionelle Bew{\"a}ltigung der Anforderungen pflegerischer Praxis vorzubereiten.}, language = {de} } @misc{SkudlikLueftlZaglacheretal.2024, author = {Skudlik, Stefanie and L{\"u}ftl, Katharina and Zaglacher, Regina and Zaglacher, Melina and M{\"u}ller, Martin}, title = {Der {\"U}bergang von Zuhause ins Pflegeheim aus der Perspektive der Versorgungstriade. Interviewergebnisse als Grundlage f{\"u}r eine Interventionsentwicklung. Vortrag f{\"u}r den EbM-Kongress in Berlin am 14. M{\"a}rz 2024}, year = {2024}, language = {de} } @misc{ThalhammerLueftl2024, author = {Thalhammer, Regina and L{\"u}ftl, Katharina}, title = {„Da wird bis zur letzten Sekunde gewartet". Das Erleben von {\"U}bergangsprozessen im Kontext von Pflegebed{\"u}rftigkeit aus der Perspektive der Gesundheitsberufe. Eine Grounded Theory Studie. Poster f{\"u}r den EbM Kongress in Berlin am 13.M{\"a}rz 2024}, year = {2024}, language = {de} } @article{KraftQuaysonKellner2024, author = {Kraft, Sarah Katharina and Quayson, Matthew and Kellner, Florian}, title = {Assessing the German Act on Corporate Due Diligence Obligations in Supply Chains: a perspective from the smallholder cocoa farmer}, series = {Frontiers in Sustainability}, volume = {5}, journal = {Frontiers in Sustainability}, doi = {10.3389/frsus.2024.1376619}, year = {2024}, abstract = {This research examines the potential outputs, outcomes, and impacts of the German Act on Corporate Due Diligence Obligations in Supply Chains (LkSG) on the smallholder cocoa farmers in West Africa. The study primarily relies on a literature review and an impact pathway to conduct a systematic analysis to identify the potential effects of the LkSG on smallholder cocoa farmers. The findings indicate that some, but not all of the risks addressed by the LkSG align with those faced by smallholder cocoa farmers and their families. Additionally, the research also reveals weaknesses, particularly in managing environmental risks, which the LkSG does not adequately cover. Our findings show that in the short- and medium-term, the LkSG has no potential effects on smallholder cocoa farmers. Furthermore, the potential positive impacts of the law on smallholder cocoa farmers will take a long time to realize, as the LkSG considers primarily tier-1 suppliers. Companies in Germany might reassess their supply chains to strive for an LkSG-risk-free supply chain, which could in the long term have sustained impacts on smallholder cocoa farmers. However, we recommend a comprehensive risk analysis of the cocoa supply chain to enhance the human rights of cocoa farmers.}, language = {en} } @book{LukeschKellner2024, author = {Lukesch, Maximilian and Kellner, Florian}, title = {{\"U}bungsbuch Produktionswirtschaft}, edition = {3}, publisher = {Springer Gabler}, address = {Berlin, Heidelberg}, doi = {10.1007/978-3-662-68672-0}, publisher = {Technische Hochschule Rosenheim}, pages = {281}, year = {2024}, abstract = {Dieses Buch bietet Studierenden {\"u}ber 80 {\"U}bungsaufgaben und f{\"u}nf Fallstudien inklusive ausf{\"u}hrlicher L{\"o}sungen zu ausgew{\"a}hlten Themen der Produktionswirtschaft und Industrie 4.0. Jedes Kapitel enth{\"a}lt eine kurze Einleitung sowie zu erreichende Lernziele. Querverweise auf das Lehrbuch „Produktionswirtschaft" von Kellner/Lienland/Lukesch erleichtern das Selbststudium und erm{\"o}glichen eine optimale Pr{\"u}fungsvorbereitung. Die 3. Auflage wurde redigiert und um neue Rechenaufgaben sowie eine weitere Fallstudie zum Themenbereich Industrie 4.0 erg{\"a}nzt.}, language = {de} } @incollection{WissingKerresDorotheaetal.2024, author = {Wissing, Christiane and Kerres, Andrea and Dorothea, Thurner and L{\"u}ftl, Katharina}, title = {Pflegedidaktische {\"U}berlegungen zur Implementierung von Fallbesprechungen im Rahmen der Lernortkooperation im Pflegebildungssystem}, series = {Handbuch Pflegedidaktik II}, booktitle = {Handbuch Pflegedidaktik II}, editor = {Br{\"u}he, Roland and von Gahlen-Hoops, Wolfgang}, publisher = {UTB}, address = {Stuttgart}, publisher = {Technische Hochschule Rosenheim}, pages = {93 -- 117}, year = {2024}, abstract = {Eine Lernortkooperation (LOK) kann die Lehr-Lern-Prozesse in der Pflegebildung verbessern (vgl. Briese 2018: 7). Allerdings besteht eine LOK nicht nur aus dem theoretischen und den praktischen Lernorten, sondern auch aus {\"u}bergreifenden Lernorten, wie beispielsweise der sogenannte dritte Lernort. Um die LOK zu st{\"a}rken und ein gemeinsames Bildungsver-st{\"a}ndnis zu erlangen, m{\"o}chten wir die Methode der Fallbesprechung nutzen. Anhand dieser Methode stellen wir pflegedidaktische {\"U}berlegungen an, wie eine zielgruppengerechte Umsetzung auf allen Ebenen der LOK - Information, Abstimmung und Kooperation (vgl. Dehnbostel 2022: 97) - gelingen k{\"o}nnte.}, language = {de} } @misc{KardasLueftl2024, author = {Kardas, Leopold and L{\"u}ftl, Katharina}, title = {DaheimLeben4.0. Technisch unterst{\"u}tztes Leben zuhause - Lernangebot f{\"u}r die generalistische Pflegeausbildung. Workshop beim Bremer Pflegekongress am 16.5.2024}, year = {2024}, language = {de} } @misc{KardasNickLueftl2024, author = {Kardas, Leopold and Nick, Carola and L{\"u}ftl, Katharina}, title = {Strategien der Patienten- und Familienedukation zur F{\"o}rderung des selbstbestimmten Lebens daheim. Vortrag beim Bremer Pflegekongress am 16.5.2024}, year = {2024}, language = {de} } @article{SchwarzOrtlerLindner2024, author = {Schwarz, B. and Ortler, M. C. and Lindner, J. A.}, title = {Rotational speed change and reverse mixing to avoid baffles in dispersing processes}, series = {Chemical Engineering Research and Design}, volume = {206}, journal = {Chemical Engineering Research and Design}, doi = {10.1016/j.cherd.2024.05.004}, pages = {302 -- 309}, year = {2024}, abstract = {Stirring is used for mass and heat transfer, particle suspending or similar processes. It is commonly conducted in a steady operation mode. This paper targets on performing the stirring process dynamically by reversing the rotation direction to introduce additional turbulences and hence accelerating the dispersing processes. The power introduced into the fluid as well as mixing kinetics performing dynamic mixing were studied based on the rotational acceleration, blade pitch angle, liquid volume and duration of the rotational speed direction interval for a vessel equipped with a turbine agitator with and without baffles. Experiments show that baffles are not necessary if reverse mixing is performed at a specific frequency.}, language = {en} } @article{WohlschlaegerVersenLoederetal.2024, author = {Wohlschl{\"a}ger, Maximilian and Versen, Martin and L{\"o}der, Martin G. J. and Laforsch, Christian}, title = {Identification of different plastic types and natural materials from terrestrial environments using fluorescence lifetime imaging microscopy.}, series = {Analytical and Bioanalytical Chemistry}, journal = {Analytical and Bioanalytical Chemistry}, doi = {10.1007/s00216-024-05305-w}, year = {2024}, abstract = {Environmental pollution by plastics is a global issue of increasing concern. However, microplastic analysis in complex environmental matrices, such as soil samples, remains an analytical challenge. Destructive mass-based methods for microplastic analysis do not determine plastics' shape and size, which are essential parameters for reliable ecological risk assessment. By contrast, nondestructive particle-based methods produce such data but require elaborate, time-consuming sample preparation. Thus, time-efficient and reliable methods for microplastic analysis are needed. The present study explored the potential of frequency-domain fluorescence lifetime imaging microscopy (FD-FLIM) for rapidly and reliably identifying as well as differentiating plastics and natural materials from terrestrial environments. We investigated the fluorescence spectra of ten natural materials from terrestrial environments, tire wear particles, and eleven different transparent plastic granulates <5 mm to determine the optimal excitation wavelength for identification and differentiation via FD-FLIM under laboratory conditions. Our comparison of different excitation wavelengths showed that 445 nm excitation exhibited the highest fluorescence intensities. 445 nm excitation was also superior for identifying plastic types and distinguishing them from natural materials from terrestrial environments with a high probability using FD-FLIM. We could demonstrate that FD-FLIM analysis has the potential to contribute to a streamlined and time-efficient direct analysis of microplastic contamination. However, further investigations on size-, shape-, color-, and material-type detection limitations are necessary to evaluate if the direct identification of terrestrial environmental samples of relatively low complexity, such as a surface inspection soil, is possible.}, language = {en} } @article{WohlschlaegerVersenLoederetal.2024, author = {Wohlschl{\"a}ger, Maximilian and Versen, Martin and L{\"o}der, Martin G. J. and Laforsch, Christian}, title = {A promising method for fast identification of microplastic particles in environmental samples: A pilot study using fluorescence lifetime imaging microscopy}, series = {Heliyon}, volume = {10}, journal = {Heliyon}, number = {3}, doi = {10.1016/j.heliyon.2024.e25133}, year = {2024}, abstract = {Microplastic pollution of the environment has been extensively studied, with recent studies focusing on the prevalence of microplastics in the environment and their effects on various organisms. Identification methods that simplify the extraction and analysis process to the point where the extraction can be omitted are being investigated, thus enabling the direct identification of microplastic particles. Currently, microplastic samples from environmental matrices can only be identified using time-consuming extraction, sample processing, and analytical methods. Various spectroscopic methods are currently employed, such as micro Fourier-transform infrared, attenuated total reflectance, and micro Raman spectroscopy. However, microplastics in environmental matrices cannot be directly identified using these spectroscopic methods. Investigations using frequency-domain fluorescence lifetime imaging microscopy (FD-FLIM) to identify and differentiate plastics from environmental materials have yielded promising results for directly identifying microplastics in an environmental matrix. Herein, two artificially prepared environmental matrices that included natural soil, grass, wood, and high-density polyethylene were investigated using FD-FLIM. Our first results showed that we successfully identified one plastic type in the two artificially prepared matrices using FD-FLIM. However, further research must be conducted to improve the FD-FLIM method and explore its limitations for directly identifying microplastics in environmental samples.}, language = {en} } @inproceedings{PueschelCraemerKipfelsbergeretal.2024, author = {P{\"u}schel, B. Eng M. and Cr{\"a}mer, Dipl-Ing and Kipfelsberger, S. and Versen, Prof Dr-Ing M.}, title = {Embedded Sensor System mit EtherCAT f{\"u}r Messungen des Raumklimas}, series = {Tagungsband AALE 2024}, booktitle = {Tagungsband AALE 2024}, doi = {10.33968/2024.59}, pages = {291 -- 296}, year = {2024}, language = {de} } @inproceedings{PueschelCraemerKipfelsbergeretal.2024, author = {P{\"u}schel, M. and Cr{\"a}mer, P. and Kipfelsberger, S. and Versen, M.}, title = {Embedded Sensor System mit EtherCAT zur Bestimmung der Raumluftqualit{\"a}t}, series = {Tagungsband 4. Symposium Elektronik und Systemintegration, Landshut 2024}, booktitle = {Tagungsband 4. Symposium Elektronik und Systemintegration, Landshut 2024}, year = {2024}, language = {de} } @article{KraftQuaysonKellner2024, author = {Kraft, Sarah Katharina and Quayson, Matthew and Kellner, Florian}, title = {Assessing the German Act on Corporate Due Diligence Obligations in Supply Chains: a perspective from the smallholder cocoa farmer}, series = {Frontiers in Sustainability}, volume = {5}, journal = {Frontiers in Sustainability}, doi = {10.3389/frsus.2024.1376619}, year = {2024}, abstract = {This research examines the potential outputs, outcomes, and impacts of the German Act on Corporate Due Diligence Obligations in Supply Chains (LkSG) on the smallholder cocoa farmers in West Africa. The study primarily relies on a literature review and an impact pathway to conduct a systematic analysis to identify the potential effects of the LkSG on smallholder cocoa farmers. The findings indicate that some, but not all of the risks addressed by the LkSG align with those faced by smallholder cocoa farmers and their families. Additionally, the research also reveals weaknesses, particularly in managing environmental risks, which the LkSG does not adequately cover. Our findings show that in the short- and medium-term, the LkSG has no potential effects on smallholder cocoa farmers. Furthermore, the potential positive impacts of the law on smallholder cocoa farmers will take a long time to realize, as the LkSG considers primarily tier-1 suppliers. Companies in Germany might reassess their supply chains to strive for an LkSG-risk-free supply chain, which could in the long term have sustained impacts on smallholder cocoa farmers. However, we recommend a comprehensive risk analysis of the cocoa supply chain to enhance the human rights of cocoa farmers.}, language = {en} } @inproceedings{HerzLorenzMuscatetal.2024, author = {Herz, Jonas and Lorenz, Katharina and Muscat, Dirk and Str{\"u}bbe, Nicole}, title = {Polymeric core-shell and mono-material fibers for concrete reinforcement}, series = {AIP Conference Proceedings}, volume = {3158}, booktitle = {AIP Conference Proceedings}, number = {1}, organization = {38th International Conference of the Polymer Processing Society (PPS-38)}, doi = {10.1063/5.0204946}, year = {2024}, abstract = {A reinforcement of concrete structures is needed because of the low tensile strength of concrete. Corrosion of the usually used steel reinforcments cause issues during time. Therfore, alternative reinforcements produced from non-corosive materials - like polymer fibers - become more interesting. A polymer fiber has to reach high mechanical properties and a good bonding ability to concrete. Both properties can be influenced by the selection of polymer and the used production process. Two polymers, polypropylene and aliphatic polyketone are tested within this study. First mono-material fibers of each material are produced and tested, later the materials are combined in a core-shell fiber. All fibers are produced by standard extrusion or coextrusion and a later drawing process. The mechanical properties are determined by tensile tests. The calculation of interfacial shear strength from single fiber pull-out tests allows an evaluation of the bonding ability. Additionally, fiber surface before and after pull-out is examined using reflected light microscopy. Contact angle measurements are done to evaluate possible influences of the surface energy and polarity. Density measurements are used to compare weight potential of the different mono-material and core-shell fibers. The results show good mechanical properties for all fiber materials. The interfacial shear strength is ≈ 2-3 times higher for fibers with polyketone compared to the ones with polypropylene at the fibers surface, which can be explained by higher surface energy and polarity of the polyketone compared to polypropylene and different surface deformation during pull-out. Lower densities are reached by fibers containing polypropylene.}, language = {en} } @book{LukeschKellner2024, author = {Lukesch, Maximilian and Kellner, Florian}, title = {{\"U}bungsbuch Produktionswirtschaft}, edition = {3}, publisher = {Springer Gabler}, address = {Berlin, Heidelberg}, doi = {10.1007/978-3-662-68672-0}, publisher = {Technische Hochschule Rosenheim}, pages = {XVIII, 281}, year = {2024}, abstract = {Dieses Buch bietet Studierenden {\"u}ber 80 {\"U}bungsaufgaben und f{\"u}nf Fallstudien inklusive ausf{\"u}hrlicher L{\"o}sungen zu ausgew{\"a}hlten Themen der Produktionswirtschaft und Industrie 4.0. Jedes Kapitel enth{\"a}lt eine kurze Einleitung sowie zu erreichende Lernziele. Querverweise auf das Lehrbuch „Produktionswirtschaft" von Kellner/Lienland/Lukesch erleichtern das Selbststudium und erm{\"o}glichen eine optimale Pr{\"u}fungsvorbereitung. Die 3. Auflage wurde redigiert und um neue Rechenaufgaben sowie eine weitere Fallstudie zum Themenbereich Industrie 4.0 erg{\"a}nzt.}, language = {de} } @unpublished{BoehmZagarRissetal.2024, author = {B{\"o}hm, Stefan-Andreas and Zagar, Bare Luka and Riß, Fabian and Kort{\"u}m, Christian and Knoll, Alois Christian}, title = {Automated Feature Recognition in Surface Cad Models Based on Graph Neural Networks}, doi = {10.2139/ssrn.4772779}, year = {2024}, abstract = {Driven by increasing customer demands, manufacturing processes encompass increasingly intricate workflows. The industry relies on computer-aided process planning software to effectively manage the intricacies of these complex manufacturing processes. This software is crucial to analyze computer-aided design data for a product and determining the required machining steps. However, a notable challenge arises, particularly in the case of custom products, where the machining steps can significantly vary depending on the available machinery and the employees' preferences.This study introduces a configurable automated feature recognition framework based on expert knowledge. Experts can encode their insights and expertise within this framework using a configurable synthetic data generator. Modern graph neural networks learn from the data generated by this data generator, achieving an average recognition accuracy up to 80\% (F1-score) with a runtime performance of 21.98 milliseconds per model. Importantly, it accomplishes this even when confronted with highly intersecting machining features without requiring data conversion into alternative formats, such as voxel or pixel representations.}, language = {en} } @article{FuchsSchwingenheuerSteineggeretal.2024, author = {Fuchs, A. and Schwingenheuer, M. and Steinegger, E. and Voglmaier, T.}, title = {On an Interaction Model of General Language Change}, series = {Journal of Quantitative Linguistics}, volume = {31}, journal = {Journal of Quantitative Linguistics}, number = {2}, doi = {10.1080/09296174.2024.2344946}, pages = {107 -- 138}, year = {2024}, abstract = {In the following article, we construct an interaction model of general language change. This contributes in particular to quantitative studies on reversible language change initiated by G. Altmann by adding explanatory character in tracing global features of general language change back to the individual interaction of speakers. Although the corresponding coupled differential equations are (presumably) non-integrable, we use methods from the theory of dynamical systems to deduce the long-term behaviour (depending on four interaction parameters) of the model for any given initial constellation of speakers. Subsequent numerical analysis of real data on language change is used to justify the relevance of the constructed model for the practicing quantitative linguist. We show how data-fitting methods can be used to determine the four interaction parameters and predict from them the long-term behaviour of the system, i.e. if complete language change or reversible language change will take place.}, language = {en} } @misc{Berger2024, author = {Berger, Yvonne}, title = {Doing transnational biographies in the PRC - Educational upward mobility, social stratification and family}, editor = {Berger, Yvonne}, year = {2024}, abstract = {In the 1990s, China implemented educational reforms to expand access to education. However, the focus on neoliberal ideologies and educational success has led to significant social implications in the context of social strata. As a result, students now face pressure to perform in the educational system to achieve success and therefore social upward mobility. Families encourage their children to pursue education as a means of social advancement, and this has become a defining feature of Chinese society to have or not have social quality (suzhi). In this presentation, I will discuss how this focus on education impacts the social upward mobility and biographical orientations of elite students in China. I will discuss social mobility and stratification through the lens of habitus theory. According to P. Bourdieu, this theoretical perspective suggests that achievement in the context of social mobility is not solely dependent on economic capital but also on cultural capital. Biographically, this is highly interesting, as families represent the essential point of reference for educational decisions and impact making. Families play a crucial role in shaping educational decisions and aspirations; if individuals lack the necessary economic, social and cultural capital, they may seek opportunities in transnational contexts as a form of outsourcing and even biographical illusion.}, language = {en} } @inproceedings{Seliger2024, author = {Seliger, Norbert}, title = {Reconfigurable Polygonal Planar Inductor with Bistable Snapping Mechanism}, series = {2024 IEEE Open Conference of Electrical, Electronic and Information Sciences (eStream), Vilnius, Lithuania}, booktitle = {2024 IEEE Open Conference of Electrical, Electronic and Information Sciences (eStream), Vilnius, Lithuania}, isbn = {979-8-3503-5241-2}, issn = {2690-8506}, doi = {10.1109/eStream61684.2024.10542595}, pages = {1 -- 6}, year = {2024}, abstract = {A mechanically tunable planar single-turn inductor in air is proposed. The bistable flexible deflection of axially compressed wire segments is used for variation of the loop area of regular polygonal loop inductors. We present analytical expressions for the loop inductance and confirm the theoretical findings by magneto-quasi-static field simulation on exemplary polygonal circuits.}, language = {en} } @misc{NiemannResch2024, author = {Niemann, Anne and Resch, Judith-Elisabeth}, title = {Landlabor: Neues Leben f{\"u}r die alte G{\"a}rtnerei. Projektdokumentation Entwerfen 3, WS 2023-24}, editor = {IAD - Technische Hochschule Rosenheim,}, organization = {Technische Hochschule Rosenheim}, url = {http://nbn-resolving.de/urn:nbn:de:bvb:861-opus4-24631}, pages = {53}, year = {2024}, abstract = {Die G{\"a}rtnerei Demmel in dem knapp 3.000 Einwohner großen Ort Seeshaupt am Starnberger See blickt auf eine {\"u}ber 100-j{\"a}hrige Geschichte zur{\"u}ck. 1902 gegr{\"u}ndet, wird das Unternehmen in Familienbesitz von drei Generationen betrieben. 2002 wurde die G{\"a}rtnerei an einen langj{\"a}hrigen Mitarbeiter verpachtet, doch 2020 endete die Pacht, um das Gel{\"a}nde weiterentwickeln zu k{\"o}nnen. Studierende des 3. Semesters Architektur entwickeln Vorschl{\"a}ge f{\"u}r eine Revitalisierung des Gel{\"a}ndes. Die Aufgabe ist der Entwurf eines neuen Geb{\"a}udes im Eingangsbereich. Es markiert den Zugang zum Gel{\"a}nde und steht beispielhaft f{\"u}r die Verbindung von Tradition und Moderne. Das Konzept basiert auf den suffizienten Prinzipien von „Einfach Bauen": der Reduktion auf das Wesentliche und dem Verzicht auf alles {\"U}berfl{\"u}ssige.}, subject = {Bauen}, language = {de} } @inproceedings{FluegelTubachWeinzierletal.2024, author = {Fl{\"u}gel, Lucy and Tubach, Larissa and Weinzierl, Julia and Schunk, Michaela and Hammerschmidt, Thomas}, title = {Neugestaltung von BIPAM und RKI: Internationaler Vergleich von Public Health-Instituten}, series = {8. Nationale Impfkonferenz, 13.-14.06.2024, Rostock Warnem{\"u}nde ; Programm, Abstractband}, booktitle = {8. Nationale Impfkonferenz, 13.-14.06.2024, Rostock Warnem{\"u}nde ; Programm, Abstractband}, pages = {63 -- 64}, year = {2024}, abstract = {Zielsetzung Zur St{\"a}rkung der gesundheitlichen Resilienz der Bev{\"o}lkerung in Deutschland soll der {\"o}ffentliche Gesundheitsdienst ({\"O}GD) neu strukturiert werden. Die Pr{\"a}vention nicht-{\"u}bertragbarer Erkrankungen soll am Bundesinstitut f{\"u}r Pr{\"a}vention und Aufkl{\"a}rung in der Medizin angesiedelt werden, in dem auch die Bundeszentrale f{\"u}r gesundheitliche Aufkl{\"a}rung aufgeht, w{\"a}hrend das Robert Koch-Institut f{\"u}r Infektionskrankheiten zust{\"a}ndig bleibt. Vor diesem Hintergrund soll durch den Vergleich von L{\"a}ndern mit einer guten pr{\"a}ventiven Versorgung untersucht werden, welche Strukturen und Maßnahmen f{\"u}r die Impfpr{\"a}vention f{\"o}rderlich sind. Material \& Methoden Durch eine systematische Literaturrecherche wurden L{\"a}nder mit hohen Impfquoten gegen Influenza identifiziert. F{\"u}r den L{\"a}ndervergleich wurden ein staatliches Gesundheitssystem sowie je eines mit sozialem bzw. privatem Krankenversicherungssystem herangezogen. Die Organisation der Public Health-Institutionen, ihre Aufgaben, Maßnahmen und Effizienz bei der Versorgung mit Schutzimpfungen wurden in dem jeweiligen Land analysiert und miteinander verglichen. Ergebnisse Großbritannien (GB), die Niederlande (NL) und die USA wurden in den Vergleich auf Grund ihrer Impfquoten gegen Influenza (81\%, 73,\%, 73\% (OECD 2023)) eingeschlossen. In diesen L{\"a}ndern unterstehen die Beh{\"o}rden dem nationalen Gesundheitsministerium, wobei sie in NL und den USA weisungsungebunden sind. In GB sind die Zust{\"a}ndigkeiten f{\"u}r infekti{\"o}se und nicht-infekti{\"o}se Erkrankungen auf zwei Beh{\"o}rden verteilt. Deutliche Unterschiede sind zwischen den Gesundheitssystemen in GB und NL und dem System der USA bei der Durchf{\"u}hrung von Pr{\"a}ventionsmaßnahmen erkennbar: Die starke Vernetzung zwischen dem {\"O}GD und der medizinischen Prim{\"a}rversorgung in GB und NL, Maßnahmen wie die Implementierung von Impfregistern, der Versand von Einladungen und Erinnerungen (NL) oder der „No-Reply-SMS-Service" mit angeschlossenem digitalen Terminmanagement (GB) erm{\"o}glichen eine b{\"u}rgernahe und gezielte Information {\"u}ber Impfungen. In der f{\"o}deralen Struktur der USA liegt die Verantwortung f{\"u}r den Gesundheitsschutz zum Teil bei den Bundesstaaten bzw. den B{\"u}rgern. Die Aufgaben der Bundesbeh{\"o}rde beschr{\"a}nkt sich auf die {\"U}berwachung von Erkrankungen, der Gesundheitsdatenanalyse, Entwicklung von Pr{\"a}ventionsstrategien und Durchf{\"u}hrung von Aufkl{\"a}rungskampagnen. Zusammenfassung und Diskussion Aus der Organisationsform der Gesundheitsbeh{\"o}rden l{\"a}sst sich der Erfolg von Impfmaßnahmen in den untersuchten L{\"a}ndern nicht ableiten. Vielmehr scheinen der Grad der Zusammenarbeit der Akteure, die Verf{\"u}gbarkeit von Surveillancedaten, die wirksame Aufkl{\"a}rung der Bev{\"o}lkerung sowie die klare Zuweisung von Verantwortlichkeiten eine wesentliche Rolle zu spielen.}, language = {de} } @article{RoessleFleischmannRoessle2024, author = {Roessle, Felix and Fleischmann, Carolin and Roessle, Kathrin}, title = {Gender diversity and financial performance in executive positions in German companies}, series = {Problems and Perspectives in Management}, volume = {22}, journal = {Problems and Perspectives in Management}, number = {2}, doi = {10.21511/ppm.22(2).2024.44}, pages = {571 -- 581}, year = {2024}, abstract = {An underrepresentation of women in executive positions has persisted for decades. This paper aims to analyze the financial impact of women in executive positions in German companies by examining the economic value added and exploring the effects of Environmental, Social, and Governance (ESG) factors and female supervisory board members on female board members. The results indicate that in the 200 largest German companies, the share of female executives increased between 2018 and 2022. Regardless of industry, female executives started at very low levels at around 4\% in 2018; in 2022, this figure reached around 11\%. Thereby, the financial sector showed the highest share of female executives at around 14\% in 2022, and the industrial sector at around 9\%. A closer look reveals that large companies have higher shares of female executives than smaller companies. Large companies show an average of 17\% compared to small ones, and in 2022, only 8\%. There is a positive correlation between the share of female supervisory board members and female executives, arguing that female supervisory board members seem to hire more female executives. Companies with more female executives tend to have lower ESG controversy scores, and companies with more female executives, measured by the economic value added, perform better financially than companies with few or no women. Companies with female executives show about 2 percentage points higher economic value added than those with the lowest share of females (no or few female executives). Thus, it seems that female executives matter and make a difference in companies.}, language = {en} } @inproceedings{FleischmannLogemannHeidewaldetal.2024, author = {Fleischmann, Carolin and Logemann, Minna and Heidewald, Jeanette and Cardon, Peter and Aritz, Jolanta and Swartz, Stephanie}, title = {Fostering GenAI Literacy in Higher Education for Future Workplace Preparedness: A Mixed-Methods Study}, series = {ECIS 2024 Proceedings}, booktitle = {ECIS 2024 Proceedings}, pages = {1859}, year = {2024}, abstract = {As generative AI (GenAI) becomes increasingly integrated into the professional workplace, offering significant productivity gains according to emerging research evidence, professionals and students need to build competencies to thrive in this new environment. In higher education, curricula must incorporate GenAI literacy to help students engage with this important and evolving technology. This research introduces results from a mixed-method study conducted among organisational practitioners, with the goal of creating an understanding of GenAI literacy needs across broad organisational contexts. We develop a Diamond Model of GenAI literacy for higher education to support curricular transformations needed to help students entering the GenAI-infused workplace. The suggested Diamond Model advocates for refining educational approaches to equip graduates with the capabilities to apply GenAI, maintain accountability, ensure authenticity and exercise agency in GenAI-driven workplaces.}, language = {en} } @inproceedings{WiedlObermeierKarlingeretal.2024, author = {Wiedl, Sebastian and Obermeier, Frederik and Karlinger, Peter and M{\"u}ller, Norbert}, title = {Holzbasierte Bio{\"o}konomie und Kunststofftechnik: Nachwachsende Rohstoffe f{\"u}r technische Bauteile}, series = {PIAE Europe 2024}, booktitle = {PIAE Europe 2024}, number = {2435}, publisher = {VDI Verlag GmbH}, address = {D{\"u}sseldorf}, isbn = {978-3-18-092435-9}, pages = {413 -- 427}, year = {2024}, language = {de} } @inproceedings{SchoepferMayrSchandaetal.2024, author = {Sch{\"o}pfer, Fabian and Mayr, Andreas R. and Schanda, Ulrich and Nusser, Bernd and Arnold, J{\"o}rg and Vogel, Albert and V{\"o}lker, Conrad}, title = {Entwicklungen bei der Prognose von Ger{\"a}uschen aus geb{\"a}udetechnischen Anlagen}, series = {12. Bauphysiktage 2024}, booktitle = {12. Bauphysiktage 2024}, organization = {Bauhaus-Universit{\"a}t, Weimar}, year = {2024}, language = {de} } @inproceedings{RaboldBacherGriesshammeretal.2024, author = {Rabold, Andreas and Bacher, Stefan and Grießhammer, Stefan and Pfattheicher, Silas}, title = {Schallschutz von Geb{\"a}uden in Holzmodulbauweise Teil I - Ermittlung von Planungsdaten f{\"u}r Trennbauteile}, series = {Fortschritte der Akustik - DAGA}, booktitle = {Fortschritte der Akustik - DAGA}, organization = {Deutsche Gesellschaft f{\"u}r Akustik e.V.}, year = {2024}, language = {de} } @inproceedings{PfattheicherDehmSchanda2024, author = {Pfattheicher, Silas and Dehm, Maximilian and Schanda, Ulrich}, title = {Bibliotheksaal Augustiner-Chorherrenstift Herrenchiemsee - Optimierung der Raumakustik}, series = {Fortschritte der Akustik - DAGA}, booktitle = {Fortschritte der Akustik - DAGA}, organization = {Deutsche Gesellschaft f{\"u}r Akustik e.V.}, year = {2024}, language = {de} } @inproceedings{ChateauvieuxHellwigWeise2024, author = {Ch{\^a}teauvieux-Hellwig, Camille and Weise, Yvonne}, title = {BIM und Schallschutz - kommerzielle Tools und die Zukunft}, series = {Bauphysik \& Geb{\"a}udetechnik}, booktitle = {Bauphysik \& Geb{\"a}udetechnik}, organization = {Forum Holzbau}, year = {2024}, language = {de} } @inproceedings{Schoepfer2024, author = {Sch{\"o}pfer, Fabian}, title = {{\"U}bertragungsfunktionen - einfache Prognose des L{\"a}rms bei geb{\"a}udetechnischen Anlagen}, series = {Bauphysik \& Geb{\"a}udetechnik}, booktitle = {Bauphysik \& Geb{\"a}udetechnik}, organization = {Forum Holzbau}, year = {2024}, language = {de} } @inproceedings{KruseWirnsberger2024, author = {Kruse, Tobias and Wirnsberger, Markus}, title = {Str{\"o}mungs- und Ger{\"a}uschanalyse eines dezentralen L{\"u}ftungsger{\"a}tes mit PIV und akustischer Kamera}, series = {Bauphysik \& Geb{\"a}udetechnik}, booktitle = {Bauphysik \& Geb{\"a}udetechnik}, organization = {Forum Holzbau}, year = {2024}, language = {de} } @inproceedings{Griesshammer2024, author = {Grießhammer, Stefan}, title = {Schallschutz von Geb{\"a}uden in Holzmodulbauweise Teil II - Messung und Simulation der Stoßstellen}, series = {Fortschritte der Akustik - DAGA}, booktitle = {Fortschritte der Akustik - DAGA}, organization = {Deutsche Gesellschaft f{\"u}r Akustik e.V.}, year = {2024}, language = {de} } @inproceedings{MarxtSchandaKrueger2024, author = {Marxt, Michaela and Schanda, Ulrich and Kr{\"u}ger, Jan}, title = {Einfluss von visuellem Umfeld und Beleuchtung auf die L{\"a}stigkeit von L{\"a}rm in H{\"o}rversuchen}, series = {Fortschritte der Akustik - DAGA}, booktitle = {Fortschritte der Akustik - DAGA}, organization = {Deutsche Gesellschaft f{\"u}r Akustik e.V.}, year = {2024}, language = {de} } @inproceedings{ParzingerSchanda2024, author = {Parzinger, Michael and Schanda, Ulrich}, title = {Analyse der Schalld{\"a}mmung mit Methoden der mathematischen Statistik und der KI}, series = {Fortschritte der Akustik - DAGA}, booktitle = {Fortschritte der Akustik - DAGA}, organization = {Deutsche Gesellschaft f{\"u}r Akustik e.V.}, year = {2024}, language = {de} }