TY - JOUR T1 - 2/2017 Erste Änderungssatzung zur Prüfungsordnung für den Bachelorstudiengang Medien- und Kommunikationsinformatik an der Fakultät Kommunikation und Umwelt der Hochschule Rhein-Waal T3 - Amtliche Bekanntmachungen der Hochschule Rhein-Waal - 2017-02 Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-10349 VL - 2017 IS - 02 ER - TY - JOUR T1 - 1/2017 Erste Änderungssatzung zur Prüfungsordnung für den Bachelorstudiengang Environment and Energy an der Fakultät Kommunikation und Umwelt T3 - Amtliche Bekanntmachungen der Hochschule Rhein-Waal - 2017-01 Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-10333 VL - 2017 IS - 01 ER - TY - JOUR A1 - Goldbach, Carina T1 - Out-migration from coastal areas in Ghana and Indonesia - The role of environmental factors JF - CESifo Economic Studies N2 - Projections of climatic and environmental changes have generated a growing effort to assess their implications for human migration. Because migration is always a multicausal phenomenon, this study aims to disentangle the impact of environmental factors from other migration-inducing factors to shed some light on the complex relationship between the environment and migration. Thus, we conducted quantitative microlevel studies in low-lying communities in two high-mobility countries - Ghana and Indonesia - that are particularly exposed to coastal hazards like erosion, land subsidence, storm surges and an increasing sea level, and are prone to flooding on a regular basis. Different measures of environmental threats were collected, ranging from individual perceptions over the household’s distance to the coast to expert opinions. We analyzed the relationships using logistic regressions and controlled for contextual factors on multiple levels. No statistically significant direct impacts of slow-onset environmental events on migration decisions could be detected. Perceptions of storms, a clearly sudden-onset event, however, were found to be significantly linked to out-migration decisions in Ghana. These findings support the hypothesis that environmental factors are generally not a primary cause of migration and their effects are rather context specific - especially for slow-onset changes. KW - Migration KW - Environmental change KW - Ghana KW - Indonesia KW - Decision Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-7168 UR - https://doi.org/10.1093/cesifo/ifx007 VL - 63 IS - 4 SP - 529 EP - 559 ER - TY - THES A1 - Hörnschemeyer, Heike T1 - Development of a Usability Capability Self-Assessment Tool for Improvement and Monitoring of Human-Centred Design in Small and Medium-Sized Companies N2 - Usability is an important quality aspect of software products. Today, companies need to be capable to develop software with good usability to stay competitive. This can be achieved by practicing human-centred design (HCD) during the development process. However, especially small and medium-sized software enterprises (SMEs) still practice HCD on a low level, if at all. This thesis explores whether and how the approach of process capability assessment can support SMEs with a systematic improvement of HCD. It is shown that a process capability assessment for usability at SMEs can only be successful, when the first steps of initiating HCD are al-ready done. Then, a process assessment approach seems to be useful to systematically improve the usability capability at SMEs. Based on this theoretical background, a usability capability self-assessment tool tailored for SMEs is developed. It has a simplified assessment procedure and uses the DIN EN ISO 9241-220 as reference model. The self-assessment tool was applied at two German software SMEs to test whether the approach is useful for SMEs and whether the reference model is suitable. The results indicate that the usability self-assessment tool is a promising approach for future SMEs as several interesting applications were identified. The chosen reference model seems to be an appropriate choice for a self-assessment; only the complex language used in the standard impedes the assessment. All in all, the thesis lays the foundation for a systematic approach to support SMEs with usability. KW - Self-assessment KW - Usability capability KW - Small and medium-sized enterprises KW - Process assessment KW - DIN EN ISO 9241-220 Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-2433 ER - TY - THES A1 - Michev, Dimitar T1 - Recrystallisation Behaviour of Extruded 3000-series Aluminium after Minor Deformation N2 - A large part of the tube elements of a conventional tube/fin heat exchanger, designated in industry under the names multi-port extrusion (MPE) or micro-multiport (MMP) tubes, are produced from aluminum of the 3XXX series. The production of that tubing commonly consists of direct chill (DC) casting of the raw material, homogenization of the billet, extrusion, coating, coiling and final dimensioning. Additionally, to being straightened and cut to the final length, those tubes undergo height and width calibration through cold forming, to meet the customer tolerances. Consequently, this critical amount of cold work done to the material leads to recrystallization followed by the growth of very coarse grains during the brazing process. This coarsening of the microstructure reduced the strength, hardness and corrosion resistance of the material. In this paper, a characterization of the behavior of the microstructure in relation to the level of deformation is done by examining multiple samples. Three different coils each having different cross-sectional profiles, two made from the same alloy AlMn0.5 and the third made from AlMn0.2Cu0.4 were examined. From each coil samples were produced and calibrated to different changes in height and width: none (Δh=Δb=0), medium (Δh=Δb=0.05) and high (Δh=Δb=0.1). The specimens were exposed to diverse temperatures and dwell times, simulating brazing conditions. Temperatures chosen, varied from 510°C to 590°C and holding times were between 3 and 10 minutes. Optical microscopy was used to inspect and quantify the fraction recrystallized microstructure of the samples in metallographically prepared cross-sections. The data gathered from the microscopic investigation was analyzed using the Johnson-Mehl-Avrami-Kolmogorov (JMAK) model. The resulting graphs showed the effects of other parameters on the recrystallized fraction/dwelling time function. An approximation of the model was used to show the percent recrystallized microstructure and temperature dependency. This allowed the determination of the temperature at which nearly 100% of the microstructure has recrystallized, hence the process is completed. KW - Aluminium KW - Recrystallization KW - MPE-tubes KW - Brazing Y1 - 2017 ER - TY - THES A1 - Prüm, Moritz T1 - Automated Hyperspectral Field Scanner for Vegetation Monitoring N2 - Vegetation monitoring is an important tool in a variety of fields, e.g. precision agriculture and plants’ phenotyping. The system design of existing non-invasive ground based systems is usually not open-source. Therefore, these systems cannot be reliably modified and thus are not suitable to advanced applications, such as prototyping of new sensors. This thesis describes the development of a ground based hyperspectral monitoring system for use in plant science and sensor testing. A well-documented and automated working prototype has been developed and initial tests show promising results. Further work in system modularity and redundancy is needed. KW - Embedded systems KW - Hyperspectral imaging KW - Low-power design KW - System integration KW - Vegetation monitoring Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-2247 ER - TY - THES A1 - Dogotari, Marcel T1 - Hardware Design and RF Performance Evaluation of a Long Range 2.4 GHz Radio Module N2 - Low–power, long–range wireless solutions are needed for transmission of environmental and industrial monitoring data from remote, battery–driven sensors. Chirp spread spectrum (CSS) modulation techniques are able to meet these requirements. A CSS–based radio module was designed to operate in the 2.4 GHz frequency band, whose advantages are worldwide availability, lack of duty–cycle restrictions and a broad spectrum. The module’s power consumption is satisfactory, but its range has to be improved. The accuracy of time-of-flight (ToF) distance estimation, an extra feature of the module, has not been evaluated. Impedance matching, transmission lines and printed circuit board design are among the practical aspects discussed, while ToF ranging and orthogonality of CSS signals are considered from a theoretical point of view. KW - Long–range radio module KW - Printed circuit board design KW - Transmission lines and impedance matching KW - Chirp spread spectrum KW - Time-of-flight ranging Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-2158 ER - TY - THES A1 - Teng, Fei T1 - Employability of Chinese Overseas Returnees N2 - In the past years, the benefits of overseas studies have brought many Chinese returnees with some advantages to enhance their employability in the Chinese labor market. However, with a large number of overseas Chinese students returning to work in recent years, some disadvantages of returnees gradually appear that the experiences of studying abroad have been unable to satisfy domestic employers’ needs. In this bachelor’s thesis, the questions on “whether overseas studies still maintain the large benefits on employability for the majority of returned Chinese overseas students, and if not, what are the reasons?” were answered to explore the employability between Chinese returnees and the local graduates. In order to get better analysis, appropriate methods (secondary analysis, literature review, questionnaire, and so forth) were implemented during the study, which questionnaire was considered as the main research measure to update the current condition. The results were somewhat different from the previous studies which indicated a more positive attitude towards the returnees’ employability. Overseas qualifications were not considered as a decisive factor for employment in the Chinese market that more comprehensive experiences were required. Overall, the thesis is possible to provide people with a clearer understanding in the current employability of Chinese students under different study background. KW - Employability KW - Chinese returnees KW - Domestic market KW - Local graduates KW - Comparison Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-1525 ER - TY - THES A1 - Mullasserimalayil, Betzy T1 - Wirkung und Bewertung von Gerüchen an Innenraumarbeitsplätzen-eine Pilot-Fragebogenstudie N2 - „Frische, saubere Luft“ ist ein Merkmal für die Qualität der Atemluft. Obwohl emissionsarme Bauprodukte verwendet werden, können Gerüche an Innenraumarbeitsplätzen auftreten (Sucker, et al., 2014, p. 426). Meistens werden sie als Belastung durch Schadstoffe interpretiert und lösen bei den Mitarbeitern Bedenken über eine mögliche gesundheitsschädliche Wirkung aus. Wenn Beschäftigte über störende Gerüche oder gesundheitliche Beschwerden wie Kopfschmerzen, brennende Augen oder Atemwegsreizungen klagen, werden im Allgemeinen Schadstoffmessungen durchgeführt und eine Bewertung anhand von Richt- oder Referenzwerten vorgenommen. Die im Gefahrstoffrecht geltenden Arbeitsplatzgrenzwerte für Luftschadstoffe werden für Innenraumarbeitsplätze nicht angewendet, da es hier keine Beschäftigung mit Gefahrstoffen gibt. Falls die ermittelten Schadstoffkonzentrationen unterhalb der Richt- oder Referenzwerte liegen, können dennoch Beschwerden über Befindlichkeitsstörungen und Geruchsbelästigungen auftreten. Bisher fehlen jedoch Vergleichswerte, um die Bedeutung dieser Befindlichkeitsstörungen und Geruchsbeschwerden zu beurteilen, d. h. ob die Beschwerdehäufigkeiten ungewöhnlich hoch sind oder im Bereich der normalen Hintergrundprävalenz liegen (Sucker, et al., 2014, p. 428). Ziel der Studie ist, mit Hilfe von Befragungen in Büroräumen ohne bekannte Innenraumprobleme die Häufigkeit von Beschwerden über das Raumklima, gesundheitliche Beschwerden und Angaben zur Geruchswahrnehmung und Geruchsbelästigung als Vergleichswerte zu ermitteln. Dazu wurde ein Fragebogen zur Erhebung der Nutzerzufriedenheit mit der Innenraumluftqualität an Büroarbeitsplätzen entwickelt. Mit Fragen zur Geruchswahrnehmung und -belästigung wurde die Geruchssituation aus Sicht der Betroffenen erfasst. Parallel zu den Befragungen wurden Messungen von VOC, Aldehyden und CO2 sowie von Lufttemperatur und -feuchte durchgeführt, um sicher zu gehen, dass keine Beeinträchtigung durch ungünstige Klimaverhältnisse oder Schadstoffbelastungen in der Raumluft vorhanden sind. Die vorliegende Arbeit stellt die Ergebnisse der Vorstudie zur Evaluation des Fragebogens dar und macht auf Basis der gewonnen Erkenntnisse Veränderungsvorschläge für den Fragebogen und die Durchführung der Datenerhebung. Y1 - 2017 ER - TY - THES A1 - Fiederer, Maylin Lisa T1 - Betriebliche Gesundheitsförderung und Konzepterstellung bedarfsgerechter Bewegungs- und Gesundheitsangebote am Beispiel eines Unternehmens der Wasserwirtschaft N2 - Heutzutage schaffen es viele Menschen nicht mehr sich ausreichend im Alltag zu bewegen. So entsteht bei vielen ein regelrechter Bewegungsmangel, der das Risiko für Erkrankungen des Muskel-Skelett-Systems, des Herz-Kreislauf-Systems und des Stoffwechsels erhöht (Blair, 2000). Um diesem Bewegungsmangel bei den Menschen zu senken, bedarf es zielgerichteter Präventionsmaßnahmen, die die Bewegung fördern. Ein Ansatzpunkt dafür ist das Setting Arbeitsplatz (Zentrale Prüfstelle Prävention, 2017, p. 87). Hier setzt die Betriebliche Gesundheitsförderung (BGF) oder auch das Betriebliche Gesundheitsmanagement (BGM) an und zielt auf die Stärkung der Gesundheitlichen Ressourcen und die Senkung von gesundheitlichen Risiken ab (Zentrale Prüfstelle Prävention, 2017, pp. 53, 87). Um im Rahmen des BGF ein neues bewegungs- und gesundheitsförderndes Angebot zu erstellen, untersucht diese wissenschaftliche Arbeit einen Teil der Mitarbeiter eines Unternehmens im Rahmen von Gesundheitscheck-ups. Dieser Check-up beinhaltet verschiedene Testungen zu den Bereichen allgemeiner Gesundheitszustand, Körperzusammensetzung, Gleichgewicht, Dehnfähigkeit und Kraftmessung der Bauch- und Rückenmuskulatur. Die so erhobenen Daten werden in dieser wissenschaftlichen Arbeit ausgewertet und speziell auf die Bereiche mit dem größten Handlungsbedarf, der Betroffenenquote von Rückenschmerzen und den Unterschieden der Geschlechter sowie der Altersgruppen hin untersucht. Auf Grundlage dieser Erkenntnisse wird dem untersuchten Unternehmen bedarfsgerechte Bewegungs- und Gesundheitsmaßnahmen empfohlen. Die Maßnahme, die den Schwerpunkt der Empfehlung für das Beispielunternehmen bildet, ist das 3K Zirkeltraining, welches in dieser wissenschaftlichen Arbeit konzipiert wird. Dieses Zirkeltraining entspricht dabei den hohen Qualitätsstandards der Zentralen Prüfstelle Prävention (ZPP) und ist sehr variabel und somit auf jeden Bedarf des Kunden anpassbar. Das 3K Zirkeltraining besteht aus dem Aufbau eines Bewegungsangebotes innerhalb des Betriebes und der Nutzung dieser in Form eines speziell dafür entwickelten Kurses. So werden sowohl verhaltens- als auch verhältnispräventive Ansätze umgesetzt. Somit kann durch das neue anpassbare Konzept dem Bewegungsmangel und dessen gesundheitlichen Folgen entgegengewirkt werden. KW - Betriebliche Gesundheitsförderung KW - Betriebliches Gesundheitsmanagement KW - Prävention Y1 - 2017 ER -