TY - THES A1 - Rau, Katja T1 - Impact Investments - A Performance Analysis of Impact Funds N2 - Impact investing emerged as an investment option that can bridge the gap between funding from governments and philanthropist to combat social and environmental challenges (Bugg-Levine & Goldstein, 2009, p.41). However, many skeptical voices arise regarding impact investing, because some issues hinder the growth the impact investing market (Gray et al., 2015, p.3). Regulatory intervention is needed to overcome the persisting challenges (Martin, 2013, p.18). Therefore, a literature review was undertaken in order to give an overview of existing regulatory measures and initiatives that have been implemented in different regions to foster the growth of the impact investing market, especially in the light of the taxonomy that was recently proposed by the EU. The literature review revealed that many regulations and initiatives have been established across the world, however the regulatory environment regarding impact investing is currently fragmented. Therefore, it is important that governments collaborate to uniformize regulations on a global level. Furthermore, this paper aims to find out how impact funds perform financially in comparison to conventional funds. In order to answer that question a performance analysis, using the Sharpe Ratio as a performance indicator, was conducted. The performance analysis indicated that impact funds perform slightly better than conventional funds. The result goes in line with existing studies that have analyzed the performance of impact investments. This paper indicates that impact investments can compete with conventional investments, but that there is still a lot to be done to bring the market to scale. KW - Impact investing KW - Financial performance Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-5326 ER - TY - THES A1 - van Staa, Philip T1 - Welchen Einfluss haben Foodsharing-Apps auf das Ausmaß der Lebensmittelverschwendung? N2 - Entlang der gesamten Lebensmittelwertschöpfungskette fallen Nahrungsmittelabfälle an. Die Vereinten Nationen haben mit der Agenda 2030 zu verschiedenen Nachhaltigkeitszielen aufgerufen, unter anderem die globale Lebensmittelverschwendung bis 2030 zu halbieren. Deutschland hat sich diesem Ziel mit einer nationalen Strategie zur Reduzierung der Lebensmittelabfälle angenommen. (Deutscher Bundestag 2019) Das Ziel der vorliegenden Arbeit ist es, zu untersuchen, ob Foodsharing-Apps einen signifikanten Anteil leisten, um die nationalen Lebensmittelabfälle zu verringern. Dazu wird die folgende Forschungsfrage gestellt: Welchen Einfluss haben Foodsharing-Apps auf das Ausmaß der Lebensmittelverschwendung? Um die Forschungsfrage zu beantworten, sind drei qualitative Interviews mit Experten verschiedener Unternehmen durchgeführt worden, die eine langwierige Zusammenarbeit mit der Foodsharing-App „Too Good To Go“ nachweisen können. Die Ergebnisse geben Aufschluss darüber, welchen individuellen Stellenwert die Lebensmittelvergeudung sowohl für den Endverbraucher, als auch für die teilnehmenden Betriebe hat und welchen Einfluss Foodsharing-Apps dabei einnehmen. Y1 - 2020 ER - TY - THES A1 - Schreder, Lisa Johanna T1 - Ableitung eines Handlungsleitfadens für die betriebliche Gesundheitsförderung eines Unternehmens mit Hilfe einer strategischen Analyse N2 - Digitalisierung, Globalisierung und Arbeit 4.0 prägen das heutige Arbeitsleben und sind aus diesem nicht mehr wegzudenken. Diese Neuerungen stellen sowohl die Beschäftigten als auch die Arbeitgeber vor Herausforderungen. Die Mitarbeiterinnen und Mitarbeiter werden durch diese Entwicklungen in vielen Fällen immer stärker beansprucht. Beanspruchungsfolgen der neuen Belastungen zeigen sich beispielsweise durch den Anstieg psychischer Erkrankungen, denn die Fehltage im Zusammenhang mit psychischen Erkrankungen haben sich seit 1997 verdreifacht. Um trotz allem die Beschäftigten gesund und motiviert durch das Berufsleben zu führen und die Gesundheitspotenziale der Mitarbeiterinnen und Mitarbeiter zu stärken, werden in immer mehr Betrieben unter anderem Angebote der betrieblichen Gesundheitsförderung durchgeführt. Denn auch die Unternehmen haben ein großes Interesse daran, dass ihre Beschäftigten das gesamte Arbeitsleben gesund und leistungsfähig bleiben. Doch damit die Mitarbeiterinnen und Mitarbeiter von dieser betrieblichen Gesundheitsförderung nicht nur kurzfristig profitieren, muss diese auf die neuen Herausforderungen eingestellt und daraufhin ausgerichtet werden. An diesem Punkt setzt die vorliegende Masterarbeit an. Ziel dieser Arbeit ist es, die betriebliche Gesundheitsförderung eines Unternehmens für die zukünftigen Herausforderungen aufzustellen und Handlungsfelder für die weitere Ausplanung zu identifizieren. Hierfür rückt zunächst die zentrale Fragestellung in den Fokus, welche Herausforderungen für die betriebliche Gesundheitsförderung zu bewältigen sind. Dies geschieht anhand einer externen Analyse. Diese Analyse ermittelt Einflüsse, die von außen auf die betriebliche Gesundheitsförderung einwirken und somit die Chancen und Risiken für das Unternehmen darstellen. Welche Stärken und Schwächen die betriebliche Gesundheitsförderung des Unternehmens besitzt, beantwortet die interne Analyse. Ob sich aus den neuen Herausforderungen ein individueller Handlungsbedarf für die betriebliche Gesundheitsförderung des Unternehmens ergibt, lässt sich aus der abschließenden SWOT-Analyse und Diskussion der Ergebnisse erkennen. Dafür werden Stärken, Schwächen, Chancen und Risiken gegeneinander in einer Matrix aufgetragen. Wie die betriebliche Gesundheitsförderung des Unternehmens aussehen muss, um den zukünftigen Herausforderungen gewachsen zu sein, bildet sich in dem Handlungsleitfaden für die betriebliche Gesundheitsförderung des Unternehmens ab. Der Leitfaden stellt demnach eine Aufstellung der Strategie der betrieblichen Gesundheitsförderung im Unternehmen dar, in Abhängigkeit der kommenden Herausforderungen. Y1 - 2020 ER - TY - THES A1 - Li, Shiwei T1 - Influence of long-term organic and conventional farming on soil microbial properties N2 - In order to find out how different farming system influence microbial biomass and therefore influence the long-term soil fertility and soil quality, this study analyzed the impacts of conventional integrated and organic farming systems on soil microbiological parameters using soil samples from the DOK long-term field experiment (Switzerland). Farmyard manure fertilizer is applied to bio-dynamic (D), bio-organic (O) and conventional farming system (K) with two different intensities. Besides, there are a conventional mineral fertilizer received system (M) and an unfertilized control plot (U). The chloroform fumigation extraction (CFE) method and quantitative polymerase chain reaction (qPCR) test were applied for detection and quantification of soil microbial biomass along with some other tests in physical, chemical and biological aspects. Soil pH tends to increase by applying farmyard manure. Metabolic quotient (qCO 2 ) revealed a lower level in the manured system though there was no significant difference between conventional and organic system. On one hand, D treatment achieved the highest values regarding microbial biomass carbon, nitrogen and phosphorus, and the highest gene copies number of detected microbial domains. On the other hand, higher concentration of microbial biomass sodium, potassium, manganese, silicon, nickel and zinc were found in M and K system. Contrary to expectation, the soil organic matter content between different treatments had only a little difference. In general, each tested soil quality parameter was affected by the type and quantity of fertilizer used to a different extent, among which the soil microbiological parameters showed more pronounced difference compared with soil physical parameter, pH and soil organic matter content. In short, organic farming system had greater potential to maintain soil fertility and improve soil quality than conventional farming system in the long term; while the comparison between two organic systems emphasized the beneficial influence from applying compost manure and bio-dynamic additives. Y1 - 2020 ER - TY - THES A1 - Ranganathan, Shraddha T1 - Evaluation of two methods to reduce legume-related flatulence through enzymatic digestion of flatulence factors N2 - Legumes are nutritionally equivalent to many meat products, and can be used to supplement or replace meat in daily diets. This is beneficial for a variety of reasons, such as: i) growing legumes can help to reduce acidification of soil, global warming potential and energy use; ii) livestock is taxing on the environment in terms of adding to the volume of greenhouse gases and nitrification of soil while legume crops fix soil nitrogen. Consumers can be opposed to adding legumes to their diet due to the perception of legumes causing flatulence. Intestinal gas buildup, bloating, cramps, abdominal pain and flatulence are caused by raffinose family oligosaccharides (RFOs) which cannot be digested in monogastric organisms such as humans. They are therefore broken down by microflora in the intestine; this bacterial digestion releases large volumes of hydrogen, which causes flatulence. The human body lacks the enzyme required to break down these RFOs — ⍺-galactosidase. This experiment evaluated two methods of applying ⍺-galactosidase to RFOs before they reach the intestinal microflora. The first method evaluates the effectiveness of enzymatically digesting the legumes before consumption. The second evaluates the effectiveness of the enzyme supplement Beano, which applies the enzyme to RFOs in the stomach. Experimental data showed that enzymatically digesting raw flours does significantly reduce the amount of RFOs in the legume. Similarly, Beano also reduces RFOs significantly. In 4 out of the 6 legumes sampled, there was no significant difference between the two methods. In order to consider the methods for commercial use, other factors (such as economic, logistical, etc.) must also be considered. At the outset, it appears that taking an enzyme supplement such as Beano might be more economically viable in the long term for the consumer, since processing costs for the flatulence free legumes would drive up the price of (normally cheap) legumes. There is an increase in the amount of people who are giving up meat for environmental and other reasons. For these consumers, as well as those who come from cultures that integrate legumes in their cuisine, the removal of flatulence factors from this nutrition-rich food group will be very beneficial. KW - Alpha-galactosidase KW - Bloating KW - Enzymatic assay Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-4903 ER - TY - THES A1 - Khedher, Lara T1 - Evolution of CRISPR-Cas genome editing methods: Chances and challenges in biotechnology N2 - Clustered regularly interspaced short palindromic repeats, CRISPR, are located on DNA sequences, which encode for an antiviral defense mechanism in bacteria and archaea. Together with CRISPR-associated proteins, Cas endonucleases, CRISPR-Cas has emerged into a powerful platform for editing DNA and RNA. This thesis investigates the evolution and function of this prokaryotic defense mechanism and points out the three most applied CRISPR-Cas systems in relation to current applications in biotechnology. Furthermore, chances and challenges of named systems as well as a guideline for choosing the appropriate system with Cas endonucleases is framed. Therefore, several scientific databases were screened for the most informative and influential publications around the topic. Information was collected and organized in a reference management software. The utilized literature was tabularly denoted and gives an overview of the broad scope of CRISPR-Cas. The analysis of the topic shows, that CRISPR-Cas offers a broad application range with a huge chance for genome editing. A conclusion of this thesis is, that CRISPR-Cas has an enormous potential to be implemented for human genome editing. However, its challenges should be cleared beforehand. Further research has to be done to fully understand the impact CRISPR-Cas may have in future. KW - Genome editing KW - Genetics KW - CRISPR KW - Cas Y1 - 2020 ER - TY - THES A1 - Heinen, Darlene T1 - About the change in the level of satisfaction and frustration of basic psychological needs in depressed patients after sports therapy and how autonomy support contributes to this change N2 - Depression is one of the most prevalent mental disorders. Studies reported that exercises can be as effective as pharmacotherapy or psychotherapy in the treatment of depression. However less is known about the mechanism exercise effects psychological well-being. The Basic Need Theory, a mini theory within Self-Determination Theory proposes the implication of the perceived social environment on the satisfaction of basic psychological needs, namely autonomy, competence and relatedness. The satisfaction of basic needs is essential for human well-being whereas the frustration leads to ill-being. An autonomy supportive social environment is of use in the fulfillment of basic needs. The following study examined a sample of 90 participants allocated into groups of low and high exercise intensity completing an exercise therapy of 12 weeks. The perceived satisfaction and frustration of basic psychological needs and the effect of autonomy support on the change of basic psychological needs after exercise therapy in different intensities were evaluated pre and post intervention. Results have shown an effect of exercise therapy on the change of depressive symptoms. A difference of efficacy of exercises in low or high intensity could not be verified. A path analysis has shown an effect of autonomy support on the change in depressive symptoms that is partially mediated by the frustration of the need for competence. Taking together the results maintained that exercise therapy redounds in a positive change of depressive symptoms. There is evidence for the satisfaction and frustration of basic psychological needs contributed to this change. Autonomy support needs more empirical testing to be better substantiated with regard to the basic needs. Future studies might examine how the basic psychological needs relate to other facets of ill-being (e.g., anxiety). Keywords: depression, exercise and depression, Self-Determination Theory, basic psychological needs, Basic Psychological Need Satisfaction and Frustration Scale, autonomy support KW - Depression KW - Exercise Y1 - 2020 ER - TY - THES A1 - Schiffers, Lukas T1 - Optimization of RT-PCR Assays for the Roche cobas® 6800/8800 Utility Channel: Influence of 2´-O-Methyl modified Primers on PCR efficiency N2 - Automated, high-throughput real-time PCR instruments such as the cobas® 6800/8800 from Roche have revolutionized the operation in molecular diagnostics laboratories as they provide a complete process of patient samples including all necessary steps for PCR applications from material preparation up to the calculation and evaluation of final results with a minimum of user interaction. In addition to the broad spectrum of commercially available ready-to-use reagent kits for blood screenings, virologic and microbiological assays as well as tests designed for women’s health, the cobas® 6800/8800 provides a tool which allows users to develop and implement their own tests onto the high-throughput device. Equipped with this tool, called the cobas® omni Utility Channel, these automated instruments serve a high flexibility and can be adjusted to users’ personal needs. Notwithstanding the advantages of the Utility Channel, a limited number of lab developed tests have been implemented onto the cobas® 6800/8800 so far as no guideline for the optimization and transfer of such tests onto the Utility Channel has been provided to the public yet. In the course of this bachelor thesis, four real-time PCR assays, including an allele-specific duplex test for HLA-B27, an established in-house test for the differentiation and detection of Ureaplasma urealyticum/parvum, a published assay for the detection of Chlamydia trachomatis as well as a duplex reverse-transcription assay for the detection and differentiation of norovirus genogroup one and two have been optimized for the use on Utility Channel. Furthermore, 2´-O-Methyl modified primers have been integrated into the optimization process of all assays to asses their influence on PCR efficiency. Three of these four assays have been transferred successfully onto a cobas® 6800 following a developed method which lead to the final design of a flowchart guideline for the optimization of lab developed tests for the use on a cobas® 6800/8800 system. KW - PCR efficiency KW - Modified primers KW - Methylated primers KW - Cobas KW - Molecular biology Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-4632 ER - TY - THES A1 - Wellens, Sonja T1 - Vereinbarkeit von Familie und Beruf – Erhebung und Bewertung der Erwartungen zukünftiger Arbeitnehmer und Arbeitnehmerinnen unter konkreter Betrachtung der Generationen Y und Z N2 - Diese Masterarbeit befasst sich mit dem Thema Vereinbarkeit von Familie und Beruf und untersucht die Erwartungen zukünftiger Arbeitnehmer und Arbeitnehmerinnen. Mit Hilfe einer Umfrage werden Studierende bzgl. ihrer Erwartungen an den Arbeitgeber und ihrer individuellen Einstellung zu diesem Thema befragt. Die Untersuchung betrachtet konkret die Generationen Y und Z. Wird die Altersverteilung der Personen betrachtet, die sich derzeit im Studium befinden (Middendorff et al., 2017, S. 162) zeigt sich, dass Studierende größtenteils aus eben diesen beiden genannten Generationen stammen und damit entweder zwischen 1981 und 1995 oder nach 1995 geboren sind (Klaffke, 2014, S. 59ff). Außerdem sollen weitere Faktoren wie z.B. die jeweiligen Fachbereiche, in denen die Studierenden eingeschrieben sind, sowie das Geschlecht und das Vorhandensein eigener Kinder berücksichtigt werden, um auch hier auftretende Unterschiede in den Erwartungen ermitteln zu können. Anhand der Ergebnisse sollen in Kombination mit einer zuvor durchgeführten Literaturrecherche Handlungsempfehlungen für Arbeitgeber bzgl. zu treffenden Maßnahmen für die Vereinbarkeit von Familie und Beruf entwickelt werden. Neben der Online-Umfrage besteht die Basis der Masterarbeit aus einem auf eine umfangreiche Literaturrecherche beruhenden Theorieteil, welcher u.a. in Deutschland durchgeführte Studien und Unternehmensberichte aufgreift und so die theoretischen Grundlagen für das Thema Vereinbarkeit von Familie und Beruf und den aktuellen Stand dieser Thematik darlegt. Durch die Ergebnisse dieser Arbeit soll ein interdisziplinärer Erkenntnisgewinn erzielt werden. Y1 - 2020 ER - TY - THES A1 - Silva Cabral, Catarina T1 - Evaluierung der Auswirkungen von Telearbeit und Homeoffice auf die Gesundheit der Beschäftigten mittels einer empirischen Untersuchung an der Hochschule Rhein-Waal N2 - Die Anforderungen an die Arbeitswelt sind im ständigen Wandel. Dabei spielt auch die Arbeitsgestaltung in der heutigen Zeit eine große Rolle. Es besteht der Wunsch nach einer flexiblen Arbeitsgestaltung und der Möglichkeit Familie und Beruf zu vereinbaren. Zudem bringen die zunehmende Digitalisierung, die fortschreitende Nutzung sowie Weiterentwicklung von Informations- und Kommunikationstechniken neue Arbeitsformen mit sich. Eine Arbeitsform, die sich unter anderem als Ziel setzt, familienfreundliche Arbeitsbedingungen zu schaffen, ist die Telearbeit. Unter dem Begriff Telearbeit werden Arbeitsformen zusammengefasst, bei denen Angestellte ihre Arbeit ganz oder teilweise außerhalb der Gebäude des Arbeitsgebers verrichten. Dadurch sollen eine flexible Arbeitsgestaltung und eine Vereinbarkeit von Familie und Beruf ermöglicht werden. Jedoch können sich diese Arbeitsformen auch auf die Gesundheit der Beschäftigten auswirken. Aufgezeigt werden die Auswirkungen alternierender Telearbeit und Homeoffice, insbesondere im Hinblick auf die Gesundheit der Beschäftigten. In der vorliegenden Arbeit soll untersucht werden, inwiefern sich die Telearbeit bzw. Homeoffice auf den Gesundheitszustand und das Wohlbefinden der Beschäftigten auswirkt und inwiefern die alternierende Telearbeit eine psychische Belastung für die Mitarbeitenden darstellt. Darüber hinaus stellt sich die Frage, ob die Abwesenheit von Telearbeitenden zu einer psychischen oder körperlichen Belastung der Nicht-Telearbeitenden führt. Um die Forschungsfragen zu beantworten, wurde eine Online-Befragung durchgeführt, die sich an die Beschäftigten der Technik und Verwaltung, sowie die wissenschaftlichen Mitarbeitenden der Hochschule Rhein-Waal richtet. Durch die Ergebnisse der Umfrage lassen sich Erkenntnisse schließen, um die Forschungsfragen zu beantworten. Die aus der Erhebung gewonnenen Erkenntnisse bestätigen eine verbesserte Vereinbarkeit von Beruf und Privatleben, eine Erhöhung der Leistungsfähigkeit, Motivation und Produktivität und geben keinen Anhaltspunkt für eine langfristige gesundheitliche Gefährdung. Die Beschäftigten, die nur im betrieblichen Arbeitsplatz arbeiten, weisen ein Risiko für mögliche negative Auswirkungen durch eine Mehrbelastung auf. Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-4614 ER - TY - THES A1 - Bhatti, Saad Ali T1 - Investigating the possibilities of AC GMA welding for in-situ alloying in additive manufacturing N2 - Additive manufacturing is a transformative approach of building 3D objects by layer-upon-layer method, adding digital flexibility and efficiency into the industrial production process. Different categories of materials such as plastics, metals, concrete, etc., can be used for Additive Manufacturing. At present, WAAM (Wire Arc Additive Manufacturing) is of high interest for many industries, as it allows creating large-scaled metallic components of moderate complexity with high density and good mechanical properties. In this master's Thesis, the capabilities of Gas Metal Arc (GMA) welding for in-situ alloying in multi-material WAAM are being investigated. A 6-axis FD-V6 welding robot by OTC Daihen along with Welbee W400 power supply was used to produce weldments both, with alternating current (AC), as well as pulsed direct current (DC). Two of Photron's High-Frequency cameras were used to investigate the process behavior. An All-in-one oscilloscope, Yokogawa DL850E ScopeCorder, was used to record the voltage and current signals. Single-layer, straight weldments were made to investigate the impact of different welding parameters over the weld seam shape and deposition rate. Later, the setup was extended to induce cold wire to change the chemical composition of the weld seams by in-situ alloying. Therefore, a clamp with adjustable angle, height, and distance was created to position the cold wire feeder along with the GMA welding nozzle. Cross-sections of weldments were taken to extract geometrical information related to the weld seam. In the end, combined experiments were done to investigate the process capabilities of generating weld seams of equal shape but different chemical composition by changing the wire feed speeds and the process parameters. This was the fundamental step for making the process ready for multi-material additive manufacturing. To demonstrate the process performance, two multi-material demonstrator components have been manufactured at the end of the thesis. Y1 - 2020 ER - TY - THES A1 - Marx, Clara T1 - Untersuchungen zur Hygiene in städtischen Kitas unter besonderer Berücksichtigung von Lebensmittelkontaktflächen N2 - Das Ziel dieser Arbeit war, verschiedene Faktoren zu identifizieren, die einen Einfluss auf die Keimbelastung in Küchen von Kindertagesstätten (KiTa) haben können. Dazu wurden in 28 städtischen KiTas Abklatschproben von Arbeitsoberflächen (AO) und Trockentüchern (TT) genommen, wobei TSA und MacConkey-Agar verwendet wurde. Die Proben wurden anschließend bebrütet und die Ergebnisse statistisch ausgewertet. Drei Faktoren hatten einen geringfügig signifikanten Einfluss auf die Gesamtkeimzahl (GK). Diese drei Faktoren waren das Reinigen der Arbeitsoberflächen nach jedem Arbeitsschritt (Einfluss auf GK TSA/MacConkey, AO), der Zeitpunkt der Beprobung nach 12 Uhr (Einfluss auf GK TSA, TT) und eine Waschtemperatur von über 60°C (Einfluss auf GK TSA, TT). Wobei letzterer Zusammenhang zwecks fehlender Evidenz eventuell als falsch positiv gewertet werden muss. Der Zutritt für Kinder zur Küche erwies sich als stark signifikanter Einflussfaktor (p<0,05) auf die Gesamtkeimzahl an Enterobacteriaceae (d.h. KbE auf MacConkey-Agar) auf den Arbeitsoberflächen. Durch die Ergebnisse der Arbeit konnte die Notwendigkeit für Hygiene-Schulungen unterstrichen werden, die nicht nur das Küchenpersonal, sondern auch Erzieher und vor allem Kinder mit einbeziehen. Zudem konnte gezeigt werden, dass übermäßiges Reinigen der Oberflächen eher zu einer Erhöhung der Keimzahl führt als zu einer weiteren Verringerung, was vermutlich vor allem auf einen erhöhten Eintrag von Keimen über Putzutensilien zurückzuführen ist. Alle verwendeten Materialien sollten daher bei Verwendung immer in einwandfreiem Zustand sein. KW - Lebensmittel KW - Hygiene KW - Kindergarten Y1 - 2020 ER - TY - THES A1 - Vambe, Tatenda Enara T1 - A Benchmarking Research on Effective Sales Training Methods N2 - Large organisations annually invest large amounts of money into training and training delivery tools, however, the return from these investments is very low. This study tackles the question that arose after the realization that on a mean curve, the under performing and mediocre performing sales reps take up the majority, yet the excelling sales reps are just but a small population at the end. The question is then, why doe the sales reps that receive the same tools and same training perform extremely differently? To tackle this conundrum, four main models were included in the research. KW - Traininig KW - Sales training KW - Learning transference KW - Benchmarking Y1 - 2019 ER - TY - THES A1 - Kieroth, Alexander T1 - An optimization approach for the distribution logistics using the example of the Vital Centrum Hodey KG N2 - This thesis analyses how the Travelling Salesman Problem can be solved by applying the Simplex LP and the Evolutionary Algorithm with regards to driven kilometres. Each algorithm is solved by using the Excel Solver add-in provided by Microsoft Excel. The results of the two different algorithms are compared with the results of the route planning software PTV Map&Guide Online for the purpose of having a proof that the software works efficiently. Using a cost analysis, the costs for delivering goods are calculated and compared with an external supplier who acted as the outbound logistics for the company HODEY. Now that the delivery is insourced, the costs can be reduced and HODEY gains more control over the outbound logistics. An approach on how to reduce the stop times at the customers’ homes is analysed. Thus, the analysis provides information regarding where the delivery driver wastes most of their time. Additionally, an available space calculation of the delivery vehicles is carried out for the dispatching department of the company to avoid interim loading or unloading not planned for a delivery or retrieval tour KW - Travelling salesman problem KW - Simplex LP KW - Evolutionary algorithm Y1 - 2020 ER - TY - BOOK A1 - Whitney, Cory W. A1 - Huth, Axel A1 - Kehlenbeck, Katja A1 - Hammer, Karl A1 - Gebauer, Jens T1 - Field Guide to Common Homegarden Crops of Southwestern Uganda N2 - Uganda’s homegardens are highly diverse small-scale farming systems. They provide the majority of the food consumed by local people and preserve a large number of traditional crops. This booklet provides a guide to common crops found in southwestern Uganda’s homegardens. It features descriptions and uses for 68 crops divided into four sections according to crop type (annual crops, perennial herbaceous crops, shrubs and trees). Crops are ranked according to their ethnobotanical importance. Each section begins with the most important crop. Each page has four photos of the crop and includes the most common local names (in Runyankole and Luganda), as well as the common English and botanical names. Additional information on the uses and occurrences is provided as well. We hope that this booklet will be of interest to a broad community of people interested in sustainable agriculture, food systems and food security issues: e.g. both Ugandan and international academics, non-government and government actors. KW - Uganda KW - Agroforestry KW - Africa KW - Agrobiodiversity KW - Plant genetic resources KW - Homegarden KW - Uganda KW - Agroforestry KW - Agrobiodiversity KW - Plant genetic resources Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-4510 ER - TY - THES A1 - Wiesel, Anika T1 - Das Lebenslange Lernen in der Berufswelt N2 - Die traditionelle Berufswelt, die nach der Erstausbildung geradlinig verläuft, existiert schon lange nicht mehr. Kontinuierliche Veränderungen, die geringe Haltbarkeit von Wissen und die zunehmende Komplexität der Berufswelt sorgen für die wachsende Bedeutung des Lebenslangen Lernens. Deshalb stehen Arbeitnehmer*innen heute vor der Herausforderung, in der Berufsphase zu lernen und sich neue Kompetenzen anzueignen. Obwohl es eine Vielzahl an Kompetenzmodellen für das Lebenslange Lernen gibt, beziehen sich diese meistens auf die Umsetzung in der Schule. Bezüglich des Themas Lebenslanges Lernen und Kompetenzen in der Berufswelt existiert noch eine Forschungslücke. Um diese zu schließen wird in dieser Arbeit (1) eine Einführung in die Thematik Lebenslanges Lernen und Kompetenzmodelle gegeben sowie (2) Kompetenzmodelle hinsichtlich ihrer benannten Kompetenzen analysiert und vor dem Hintergrund des Lebenslangen Lernens in der Berufswelt beurteilt. Das Ergebnis zeigt, dass die Kompetenzen Kommunikation, Kollaboration, Kreativität, kritisches Denken, Problemlösekompetenz, digitale Kompetenz, kulturelle Kompetenz, Informationsmanagement, Selbststeuerung, Flexibilität, ethisches Bewusstsein und unternehmerische Kompetenz das Lebenslange Lernen in der Berufswelt fördern. Weitere Faktoren, welche für das Lebenslange Lernen in der Berufswelt berücksichtigt werden müssen, sind: Sinnhaftigkeit, Anwendungsmöglichkeit und Motivation. Eine Einschränkung dieser Arbeit ist, dass sich nicht alle der analysierten Kompetenzmodelle auf die Berufswelt beziehen, weshalb fraglich ist, wie geeignet die verwendeten Kompetenzmodelle für die Untersuchung sind. Durch die Ergebnisse dieser Arbeit wird hervorgehoben, dass bezüglich des Themas Lebenslanges Lernen und Kompetenzen in der Berufswelt weiterhin Forschungsbedarf besteht. Zukünftige Forschung könnte die durch diese Arbeit gewonnen Ergebnisse durch noch ergänzende Untersuchungen mit anderen oder weiteren Kompetenzmodellen erweitern. N2 - The traditional professional world, which presupposes continuity of paths after initial training, has long ceased to exist. Continuous changes, the low durability of knowledge and the increasing complexity of the professional world foster the growing importance of lifelong learning. Today, employees are faced with the challenge of learning and acquiring new competences, even in the workplace. Although there are a variety of competence models for lifelong learning, these mostly relate to implementation at school. However, there is still a research gap on the subject lifelong learning and competences in the professional world. In order to bridge this gap, this essay will present (1) an introduction to the topic of lifelong learning and its competence models and (2) an analysis and assessment of the utility of these competence models in the professional world. The result shows that the competences of communication, collaboration, creativity, critical thinking, problem-solving skills, digital skills, cultural skills, information management, self-regulation, flexibility, ethical awareness and entrepreneurial skills promote lifelong learning in the professional world. Other aspects to consider regarding lifelong learning in the professional world are: Meaningfulness, possible application and motivation. These results are restricted by the fact that not all present competence models are fit for application in the professional world. Therefore, the question arises whether these competence models are suited for the investigation. Based on the outlined limitations, the essay thus calls for further research, which could expand the knowledge gained in this work by examining additional studies with other or further competence models. Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-4383 ER - TY - THES A1 - Leferink, Gemma T1 - Überprüfung der Konformität eines unternehmensinternen Umweltmanagementsystems zur Vorbereitung eines Systemwechsels auf die DIN EN ISO 14001:2015 Y1 - 2019 ER - TY - THES A1 - Chhabra, Vaibhaiv Bobby T1 - Design of a Robust Powertrain of an E-Bike Test Bench N2 - In the last few decades, environmental impacts of petroleum-based transportation have led to a renewed interest in electric transport infrastructure. E-bikes are zero-emission vehicles as they do not emit any combustion by-products. With the increasing demand for electric bikes over the past decades, the production of e-bikes has also rocketed. The purpose of this thesis is to optimize and design a robust power train of an e-bike test bench that is stationed in the Rhine-Waal University of Applied Sciences. The mechanical design of the present test bench is modular and flexible. The current test rig is susceptible to large disturbances due to vibrations in the chain drive mechanism. Due to the large segments in the chain drive, the torque results are also interrupted. These issues have been overcome by the substitution of the chain-drive mechanism to a belt-drive mechanism. The optimized power transmission system remains the same ensuring a smooth power flow in the system. In order to optimize the powertrain, three different concepts were proposed. Each concept was graded on the basis of different criteria with the help of Decision Matrix Analysis in order to choose the most promising concept. A conceptual 3D CAD model and 2D Drawings of the powertrain have been designed on SolidWorks for better reference. The substituted or the new parts that were essential for the new optimizing concept were decided with the help of a Morphological Box followed by a detailed Bill of Materials (BOM). The new powertrain was commissioned with the new parts as per the concept. The thesis further expands on the characteristics of the present test bench and the optimized test bench, the results and readings of the present test bench and the commissioning of the new powertrain. The thesis concludes with the possibility of the future work on the test bench and structural changes that are necessary for the e-bike that is to be tested. Y1 - 2020 ER - TY - THES A1 - Gerhard, Isabell T1 - „Das Ehrenamt als gesundheitliche Belastung? Eine psychische Gefährdungsbeurteilung in der Freiwilligen Feuerwehr“ N2 - Hintergrund: Freiwillige Feuerwehreinsatzkräfte sind durch ihre Arbeit vermehrt physischen und psychischen Belastungen, aber auch Gewalt ausgesetzt. Nur sehr wenige Studien beschäftigen sich mit der Komplexität der psychischen Belastungen dieser Einsatzkräfte. Besonders den freiwilligen Feuerwehreinsatzkräften wird bis dato wenig Aufmerksamkeit zu teil. Ziel der Durchführung einer psychischen Gefährdungsbeurteilung war die Identifizierung psychosozialer Arbeitsbelastungen und kurzfristiger Belastungsfolgen. Material und Methoden: In einer quantitativen Querschnittsstudie wurden freiwillige Feuerwehreinsatzkräfte aus dem Landkreis Miesbach über die psychosozialen Belastungsfaktoren bei der Arbeit sowie ihr Erleben von Gewalt im Einsatz mit Hilfe der Kurzversion des COPSOQ schriftlich befragt (71 % Rücklaufquote, n = 755). Die Antworten der Befragten wurden mit Referenzdaten der Berufsfeuerwehreinsatzkräfte aus der COPSOQ-Datenbank verglichen. Die Unterschiede zwischen beiden Gruppen wurden mittels Zweistichproben-t-Test bewertet. Ergebnisse: Freiwillige Feuerwehreinsatzkräfte bewerteten die psychosozialen Arbeitsbedingungen und Belastungsfolgen positiver als Berufsfeuerwehreinsatzkräfte. Von den 22 untersuchten Skalenmerkmalen wurden 18 von den freiwilligen Feuerwehreinsatzkräften signifikant positiver bewertet, als von den Berufsfeuerwehreinsatzkräften. Bei 4 Skalenmerkmalen konnte kein Unterschied festgestellt werden. Des Weiteren wurde im Landkreis Miesbach ein geringes Vorherrschen von Gewalt Dritter gegen freiwillige Feuerwehreinsatzkräfte festgestellt. Handlungsfelder für eine künftige Maßnahmenerarbeitung wurden für die Skalenmerkmale „Entgrenzung“, „Feedback/Rückmeldung“, „Spielraum bei Pausen und Urlaub“ sowie „Arbeitsumgebung/physische Anforderungen“ festgelegt. Diskussion: Gemäß dieser Studie weisen die freiwilligen Feuerwehreinsatzkräfte des Landkreises Miesbach im Vergleich zu den Berufsfeuerwehrkräften positivere Belastungsprofile mit geringerem Gefährdungspotenzial auf, die sich auch in einer positiveren Bewertung der Beanspruchungssituation zeigen. Insbesondere die unterschiedlichen Strukturen in den Feuerwehren scheinen für diesen Unterschied verantwortlich. Y1 - 2019 ER - TY - THES A1 - Kösters, Dominic T1 - Production and Chromatographic Analysis of Polyhydroxybutyrate from waste product streams by Azohydromonas lata N2 - As conventional plastic production receives much criticism for being harmful to both humans and the environment, this work focused on establishing a batch fermentation based on waste substrates from local industries to produce polyhydroxybutyrate (PHB) with Azohydromonas lata (A. lata). Additionally, the produced PHB was characterised by qualitative and quantitative gas chromatography coupled to a mass spectrometer (GC-MS) and gel permeation chromatography (GPC). Multiple substrates, including rhubarb waste, pea waste, and dairy industry wastewater (KAAS medium), were tested for successful fermentation. Rhubarb and pea waste could not be used as a fermentation substrate due to obstacles in upstream processing. KAAS medium was prepared by centrifugation and sterile filtration and tested in a 1 L and 4 L fermentation yielding non-competitive biomass and PHB concentrations with 0.09 g/L and 0.004 g/L, respectively. A 3 L fermentation with pure saccharose as the carbon source served as a model for comparison and analysis and resulted in a measured biomass concentration of 3.58 g/L with a PHB content of 1.43 g/L after Soxhlet extraction. The GPC analysis led to no conclusive elograms and results due to issues in non-destructively extracting and solving the PHB. The GC-MS analysis showed excellent linearity with an R2 value of 0.9906 for the standard curve and clear chromatograms, which allowed for both qualitative and quantitative analysis of PHB. Since PHB concentrations from KAAS medium were low, no quantitative analysis could be performed. Only samples from the saccharose-based fermentation could be assessed quantitatively. The found maximum PHB concentration was 2.95 g/L, which deviated from the found 1.43 g/L after Soxhlet extraction and was therefore discussed in this work. No locally available waste substrate could be found to be suitable for an industrial scale fermentation. The findings during this work led to the conclusion that semi-sterile fermentation approaches shall be investigated in future works handling waste products as they can potentially overcome upstream processing steps and, hence, make rhubarb or pea waste a potential candidate for PHB production. Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-4246 ER - TY - THES A1 - Hammond, Luciano T1 - LIDAR and RADAR Sensors in Passenger Vehicles N2 - Automotive RADAR and LIDAR are two examples of sensor technologies used to observe the environment and detect objects surrounding the host vehicle, in order to enable ADAS. Naturally, the use of sensors in order to enable systems intended to protect and support the driver or improve their comfort entails stringent requirements; not only in terms of performance, but reliability and robustness as well. This has led to the continued development of sensor technologies, with developers seeking to additionally provide more compact and cost-effective alternatives to surrounding sensing; autonomous driving being the end goal, therefore entailing stricter requirements. Although both RADAR and LIDAR sensors are used for the same purpose, i.e. measuring the radial distance towards a target and determining its velocity relative to the host vehicle, they differ with regards to their functionalities, components, operation and various other aspects, leading to individual strengths and weaknesses. For example, RADAR is known for its impressive detection range, whereas LIDAR is known for its enhanced accuracy and resolution. These contrasting characteristics therefore indicate that either sensor may be preferred over the other in certain situations; perhaps in which one may perform better than the other, or due to other factors and aspects. This paper aims to analyse and compare the two sensor technologies and their use in passenger vehicles with respect to these various factors and aspects, in order to provide an insight into different cases in which one may be more suitable than the other. In general, a single sensor cannot definitively achieve all automotive requirements within all situations. Thus, a combination of sensors is recommended, in order to benefit from their individual strengths and ensure continuous system functionality and availability to detect the surrounding environment. KW - ADAS KW - RADAR KW - LIDAR KW - ITS KW - Automotive Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-4276 ER - TY - THES A1 - Khalifeh, Amro T1 - Analysis of the Perceived Effectiveness of Design Sprints in Corporations: A Study Based on Qualitative Interviews with Practitioners from Startups and Large Enterprises N2 - Purpose — The purpose of this thesis is to evaluate the perceived effectiveness of the Design Sprint process according to practitioners in the field, and investigate optimal contexts of use as well as the limitations of the process. Design/Methodology — A qualitative study based on interviews conducted with eleven practitioners from startups and large enterprises. Data from the interviews were analyzed, interpreted, and related to the existing literature in order to answer the research questions. Findings — The hypotheses regarding the effectiveness of Design Sprint and its role in enabling efficient and effective decision-making were validated by the eleven practitioners who took part in the research. Additionally, patterns regarding optimal contexts of use of Design Sprint were identified, namely kickstarting product development initiatives and creating innovative solutions, as well as limitations of Design Sprint such as its limited use for exploring the problem space of challenge. Limitations — The research is limited by the small number of eleven participants and the lack of quantitative data. Practical Implications — The study provides useful information to researchers as well as practitioners enabling them to understand the effectiveness of Design Sprint in real-world contexts. The data from this research can be used to further investigate the topic of Design Sprint in the literature while providing practitioners with insights to help them decide in which contexts it would be best to deploy Design Sprint and gain internal support for using Design Sprint. Originality/Value — This is the first qualitative research that investigates the effectiveness of Design Sprint and academically validates its claims of value. Keywords — Design Sprint, product development, innovation, process Y1 - 2019 ER - TY - THES A1 - Oyewole, Oluwabusayomi T1 - Conversational design: the use of chatbot as an electoral information dissemination tool N2 - A steady decline in voter turnout has been recorded in many democratic countries, with young people (i.e Gen Z and Millennials) identified as a significant portion of those who don’t vote. Research has shown that one of the reasons young people do not vote is a lack of information about the electoral process, candidates and policies. Studies have also shown that preferred information dissemination medium is aligned across age groups, with older people trusting old media such as newspapers and young people leaning towards new media such as social media. With the recent advancement in machine learning, natural language interface and popularity of conversational agents such as chatbots, a new subset of new media has emerged. This study aims to investigate if chatbots could be an efficient medium for young people to access electoral information. It does this by comparing it with a website, using the EU electoral page as a case study. Based on the content of the EU electoral webpage, a chatbot was designed, trained and deployed on Telegram. Participants were randomly divided into two experimental groups (chatbot and website) and asked to find a list of crucial information, interact with the medium and then respond to the System usability scale (SUS), and a perception questionnaire. Observed data and interview notes were also taken. Analysis of the experimental data, observed data and surveys demonstrated that chatbot as a tool is inefficient as an electoral information tool because of the limitation of chatbot when out of scope questions are asked and limitation in following conversation contexts which is crucial to conversations. However, it is rated as above average on usability and joy of use, but raises questions on trust and data protection. It is recommended that the study be performed again when there are more advances to natural language processing to see if its efficiency as an electoral information medium will improve. A longitudinal study is also recommended to see if there’s a direct impact of chatbots as a tool, on young people’s motivation to vote. KW - Conversational design KW - Information KW - Chatbot KW - Election Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-4294 ER - TY - THES A1 - Gron, Alisa T1 - A comparison of the impact between recorded and classic cooking recipes employing user experience research methods N2 - This research focuses on measuring learning curves from different people while they cook with the aid from various media channels. For such purpose profile inquiries, face-to-face interviews, self-recorded assignments, and classification tests will be used. The analysis of the results intends to derive into good practices of e-learning media design. KW - UX KW - SDA-M KW - Learning media KW - Self-education KW - Cooking KW - Self-education KW - Cooking KW - SDA-M KW - Learning media KW - UX Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-3937 ER - TY - THES A1 - Ehleben, Lukas T1 - Entwicklung von Methoden zur kontinuierlichen Lagerbestandsqualitätsverbesserung durch Optimierung des Einlagerungs- und Kommissionierungsprozesses am Beispiel der Zalando SE, Standort Mönchengladbach Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-3187 ER - TY - THES A1 - Meyer zu Drewer, Johannes T1 - Soil- and Tree- Biomass Carbon as Future Farming Commodity for Smallholders in Tropics and Sub- Tropics - A Concept Review N2 - Facing prevalent soil degradation, population growth and climate change it is vital to wildly deploy versatile carbon farming practices [CF] to increase soil organic carbon [SOC] stocks and consecutive restore soils, increase their productivity and climate resilience while directly mitigating climate change through sequestration of greenhouse gas- [GHG] derivatives, such as CO₂-Carbon, in agricultural landscapes. The global aggregated mitigation potential of up to 11 GtCO₂eq yrˉ¹ (medium confidence) resulting from afforestation, SOC increment and biochar application in the land use sector can only be realised when including smallholder farmers which are in stewardship of 60% of the global arable lands. Currently soil carbon sequestration receives extensive attention, but efficient schemes to financially support smallholder transition towards carbon farming practices are lacking. Linking these smallholder structures to the global carbon markets by verifying and trading carbon offsets generated through climate smart farming practices is a new attempt to generate the required funding for transition – turning carbon into a new farming commodity for smallholders. This paper reviews approaches to SOC monitoring required for quantification and verification of offsets, based on the evaluation of methods used in the Nepalese smallholder carbon project: Forest Gardens for Closing the Global Carbon Cycle [FCGC]. Further it compares the project innovations of the FCGC with other distinguished case studies of current projects implementing carbon as a farming commodity in a tropical- subtropical smallholder context. A strong variability in SOC pattern as identified in the FCGC project, is inherent to smallholder systems, the cost of representative, direct measurements of such heterogeneous SOC distributions may be cost prohibitive. For smallholder carbon projects of aggregated scale, process-based models to determine SOC fluxes should be employed or the agricultural intervention be focused on tree- biomass- carbon which is quantifiable in a less resource demanding manners. Among the identified project innovations are: Real- time in-situ GIS applications, an innovative approach for monitoring fragmented areas under intervention; The household segment of the voluntary carbon market as a new target group to be explored; Biochar as a multifunctional soil amendment for long-term carbon sequestration; Participatory schemes for monitoring and extension services to build capacity and foster participation; and mobile money approaches to lower transaction costs and likelihood of corruption. The direct financial return from carbon- credits to the farmer is minor, thus it is imperative for the project design to utilize agricultural interventions fostering co-benefits, which are tangible to the farmer in the short to medium term and will serve as the main incentive for the adoption of CF techniques. KW - Carbon farming KW - Carbon sequestration KW - Smallholder agriculture KW - Carbon finance KW - Climate change mitigation Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-3646 ER - TY - THES A1 - Honerkamp, Jana T1 - Übertragbarkeit eines standardisierten Stufenprotokolls auf hämatoonkologisch erkrankte Patientinnen und Patienten vor Induktionstherapie N2 - Körperliche Aktivität unterstützt den Erhalt der Lebensqualität und trägt dazu bei, dass die Nebenwirkungen der Krebserkrankung und der Krebstherapie besser vertragen werden. Mit einer symptomlimitierten körperlichen Leistungsdiagnostik lässt sich die aktuelle maximale Leistungsfähigkeit einer Patientin bzw. eines Patienten bestimmen, um darauf aufbauend eine sichere und effektive Bewegungstherapie konzipieren zu können. Für eine derartige Diagnostik existieren bereits Empfehlungen für Krebspatientinnen und –patienten im Allgemeinen. Die vorliegende Bachelorarbeit überprüft, ob ein standardisiertes Stufenprotokoll auf hämatoonkologisch erkrankte Patientinnen und Patienten übertragbar ist. Dabei wird untersucht, ob das Stufenprotokoll nach den Empfehlungen durchführbar ist und wie viel Prozent der Patientinnen und Patienten am Ende des Tests ausbelastet sind. Die Ausbelastung wird angelehnt an den Kriterien des American College of Sports Medicine (ACSM) beurteilt. Außerdem wird der Frage nachgegangen, ob die objektive mit der subjektiv wahrgenommenen körperlichen Belastbarkeit korreliert. Es wurden 20 Patientinnen und 20 Patienten der Uniklinik Köln mit einer akuten Leukämie oder einem Non-Hodgkin Lymphom rekrutiert. Vor Beginn der Induktionstherapie wurde mit ihnen eine symptomlimitierte Leistungsdiagnostik mittels eines Stufenprotokolls auf einem Fahrradergometer durchgeführt. Für die Einschätzung der subjektiven körperlichen Belastungsfähigkeit diente der Fragebogen „EORTC QLQ-C30 (Version 3.0)“. Das Ergebnis besagt, dass das standardisierte Stufenprotokoll auf hämatoonkologisch erkrankte Patientinnen und Patienten vor Induktionstherapie übertragbar ist. 27,5 % von ihnen waren jedoch nach den Kriterien des ACSM nicht ausbelastet. Eine signifikante Korrelation zwischen der subjektiven und objektiven körperlichen Belastungsfähigkeit ist nicht vorhanden (p=0,055), die objektiven Ergebnisse wurden größtenteils subjektiv überschätzt. Empfehlenswert ist hier eine Spiroergometrie mit selbigem Stufenprotokoll, um genauere Ergebnisse in Bezug auf die Ausbelastung erzielen zu können oder eine submaximale Fahrradergometrie. Überdies wird eine Leistungsdiagnostik vor Beginn der Induktionstherapie empfohlen, damit die Patientinnen und Patienten schon frühzeitig mit der Bewegungstherapie beginnen können. Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-3692 ER - TY - THES A1 - Bhadouria, Devashu T1 - Synagoge of Kleve - Interactive experience in the reconstructed Synagogue of Kleve N2 - This documentation within the context of my master thesis is about my virtual reality installation called “Synagogue of Kleve”. The installation deals with the reconstruction of tangible cultural heritage in virtual reality. The installation is conceptualized to be shown in the cultural heritage institutions, including museums and historical sites in which the visitors explore the synagogue of Kleve, Germany. The result is an installation that shows the synagogue in old times, and that strives to get people interested in the history of the synagogue with the help of virtual reality that features an interactive storytelling experience. Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-4195 ER - TY - RPRT A1 - Zhang, Xianan A1 - Strauch, Marcus A1 - Sarangoo, Iderbat A1 - Schmetz, Roland T1 - Cleaning up the Spoy Canal N2 - Since the Rhein-Waal University is located at the Spoy Canal and the Spoy Canal is heavily polluted by organic matter and waste, the 2015 Technical Investment Planning course was focused on the investigation of the pollution and methods of cleaning up the canal. The following results were achieved: The pollution of the canal is not avoidable but reducible. The pollution sources are certain, the pollution from the drainage is not avoidable, but the pollution from the pedestrians is. It is important to build up a more efficient trash collection system by setting up more trash cans and more frequent daily check of the trash cans, the pollution from the city can be significantly reduced. For the existing problems like the pollution gathering at different locations in the canal, it is important to clean up these gathering once at a time, this might decrease the frequency of the pollution showing up in the city area due to wind and other influencing factors. For different solutions, after thorough research the best solution was (and is still) to purchase a boat with a front loading bucket. Because the boat height is optimal, so there are more functioning areas without loading and unloading the boat on the trailer. And it will save a lot of money in comparison to the cleaning method that was applied in 2015 (and what was applied up to late 2018). However, the investigation was a theoretical task. It was no official project with any counterparts. Therefore all results should help to create knowledge. KW - Spoy Canal KW - Pollution KW - Cleaning up Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-4224 ER - TY - THES A1 - Dascaliuc, Catalin T1 - A comprehensive study on the gearbox fault diagnosis based on vibration analysis: development of a condition monitoring system N2 - Modern industrial processes run in a continuous fashion, and unexpected shutdowns may lead to significant economic losses. Hence, sustainable maintenance practices are employed in most state-of-the-art sites. Predictive maintenance offers the possibility of mitigating breakdowns and ensures optimum usage of machines. Therefore, the development of reliable condition monitoring systems is crucial in guaranteeing reliable forecasting of machine failures and scheduling of maintenance works. However, since there is active ongoing research in the field of vibration-based condition monitoring, there is an urge to review the latest advances on this topic. Additionally, since condition monitoring is a relatively new branch of engineering, few standards and baselines exist for setting up condition monitoring systems. The current thesis aims to provide a comprehensive framework for gearbox condition monitoring. The aim is to be achieved in the form of developing a baseline GUI for bearing and gear fault analysis. A literature review is conducted to conceptualize gearbox vibration-based fault diagnosis strategies and identify the required signal processing algorithms for fault detection and diagnosis. The software development process is presented alongside the developed MATLAB-based GUI, which is deployed as a standalone application. An assessment of the implemented processing algorithms is done with various numerically generated gearbox signal models. Furthermore, the developed software is used to perform fault diagnosis on experimental data. Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-4131 ER - TY - THES A1 - Kaluza, Markus T1 - Optimierung des Reklamationsprozesses unter Einbezug der DIN ISO 10002 „Qualitätsmanagement – Kundenzufriedenheit – Leitfaden für die Behandlung von Reklamationen in Organisationen“ am Beispiel der Garlock GmbH N2 - Diese Bachelorarbeit gibt einen Überblick über die Verbesserungen und Optimierungen am erst 2018 neu aufgesetzten Reklamationsprozess sowie die daraus resultierenden Korrekturmaßnahmen unter Einbezug der DIN ISO 10002 am Beispiel der Garlock GmbH in Neuss. Hierzu wurden zunächst die Anforderungsprofile der beteiligten Parteien, was die Reklamationsbearbeitung betrifft, dargestellt. Ebenso wurde durch mehrfaches Durchlaufen des gesamten Prozesses ein Ist-Soll-Vergleich durchgeführt aus dem Korrekturmaßnahmen abgeleitet wurden. Abschließend zeigt der Autor die abgeleiteten Korrekturen und Verbesserungen am gesamten Reklamationsprozess auf, die neben einer schnelleren Abarbeitung von Reklamationen auch die Implementierung der Software QlikView zur Datenbankanalyse sowie grundsätzliche Anpassungen am ERP-System Oracle beinhaltet. KW - Reklamation KW - Reklamationsbearbeitung KW - Kundenzufriedenheit KW - Qualitätsmanagement Y1 - 2019 ER - TY - CHAP A1 - Dixon, Liza A1 - Megill, William M. A1 - Nebe, Karsten T1 - Trust in Automation: An On-Road Study of Trust in Advanced Driver Assistance Systems N2 - Appropriate user trust is critical in ensuring the acceptance and safe use of Advanced Driver Assistance Systems (ADAS). Despite the prevalence of ADAS on-road today, there is a limited understanding of how trust is affected by a user’s first contact with the system on-road. Ten participants without prior experience were introduced to a level 2 system and completed an on-road test drive session. Utilizing a mixed- methods approach including the Trust in Automation (TiA) questionnaire, verbal trust scores, and Facial Emotion Recognition (FER), trust in the system was measured at key milestones. TiA scores increased in a majority of participants, and a significant shift in the factor Reliability/Competence (p<0.05) was observed post-drive. According to FER scores, participants with a gain in TiA post-drive and those with a loss in TiA post-drive, more frequently displayed the emotions happy and angry, respectively. Results indicate that trust increases after a user’s first experience with ADAS and further that FER may be predictive of user trust in automation. KW - Advanced Driver Assistance Systems (ADAS) KW - Trust KW - Human-Machine interaction KW - Human-Automation interaction KW - Autonomous vehicles Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-4017 PB - IARIA - International Conference on Advances in Vehicular Systems, Technologies and Applications CY - Wilmington, DE, USA ER - TY - THES A1 - Salewski, Sabrina T1 - Software-Ergonomie: Ermittlung der Belastungen für Vodafone Deutschland Mitarbeiter bei der Verwendung spezieller Software N2 - Die Bachelorarbeit befasst sich mit der Ermittlung von Belastungen für Vodafone Deutschland Mitarbeiter bei der Verwendung spezieller Software. Ziel ist es, mithilfe eines eigens für die Software-Ergonomie konzipierten Fragebogens, der die verschiedenen Kriterien der Software-Ergonomie berücksichtigt, eine umfassende Benutzerbefragung durchzuführen. Mit den gewonnenen Daten werden Optimierungspotentiale ermittelt und Maßnahmen zur Reduzierung der Belastungen für die Benutzer definiert. Weiterhin wird ein Entwurf eines Lastenheftes erstellt, welches zukünftig bei der Auswahl und dem Einkauf neuer Softwares verwendet wird, um gewährleisten zu können, dass die Kriterien der Software-Ergonomie berücksichtigt werden. N2 - The bachelor thesis deals with the identification of strains for Vodafone Germany employees using special software. The purpose is to conduct a comprehensive user survey using a questionnaire specially designed for software ergonomics that takes into account the various criteria of software ergonomics. The data obtained is used to identify optimization potentials and to define measures to reduce the strain on users. Furthermore, a draft of a requirement specification is drawn up, which will be used in the future for the selection and purchase of new software in order to ensure that the criteria of software ergonomics are taken into account. Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-3990 ER - TY - THES A1 - Essa, Haya T1 - Reconstructing a Genome-scale Metabolic Model of a Chinese Hamster Ovary Cell and Analyzing its Properties N2 - This work is based on reconstructing a genome-scale metabolic model of a Chinese hamster (CHO) cell and evaluating the model’s properties and explain why it has the potential to be a great asset for future testing. It is very useful to have a mathematical model because it can be used to run simulations. These simulations would give an accurate representation of the outcome when alterations of a certain metabolic mechanism or compound are changed. The main goal is to reconstruct a working model without dead ends to be used as a teaching tool in an academic environment. It can give students, and alike, a chance to reference what a CHO cell model could resemble. Another goal is for the model to be used to run simulations. This work wants to give access to something that is currently kept under confidentiality by larger industries and allow those who wish to learn a chance to use it. The last CHO cell model was created 2 years ago, and it was never published. Therefore, this work focuses on constructing a new model with the software ‘Insilico’ by using literature, KEGG and the CHO genome database. With the aid of programs like ‘Matlab,’ ‘Excel,’ and ‘XML Notepad,’ scripts are created to be suitable for ‘Insilico.’ After many laborious trials and errors, a complete, working and full CHO cell model is reconstructed with ~1800 reactions and transporters. The FBA analysis works by showing that the model can run simulations and prove that biomass has an output. Y1 - 2019 ER - TY - THES A1 - Hannak, Sarina T1 - Betriebliches Gesundheitsmanagement – Evaluierung des Pilotprojekts „Implementierung von befit-Beauftragten“ in einem Beispielunternehmen KW - PDCA-Zyklus KW - SWOT-Analyse KW - Interview KW - Gesundheitskommunikation KW - Partizipation KW - Gesundheitsmanagement KW - Projektmanagement KW - Evaluation KW - Gesundheit KW - Gesundheitslotsen Y1 - 2019 ER - TY - THES A1 - Zlati, Felicia T1 - Production and detection of polyhydroxybutyrate by Azohydromonas lata N2 - The aim of the project was to produce, identify and quantify PHB. The bacterial strain Azohydromonas lata was cultured in multiple batch processes and the accumulation of biopolymer was observed. The following results were obtained after 50 hours of a 3L batch fermentation: a dry cell weight of 3.197 g/L, a PHB concentration of 1.939 g/L and a PHB content of 60.65%. Subsequently, the same set-up was extrapolated to an 8L batch fermentation, which yielded in a dry cell weight, PHB concentration and PHB content of 2.964 g/L, 1.090 g/L and 36.79%, respectively. The synthesized biopolymer was recovered from the bacterial cells in two ways, namely by SDS digestion and by chloroform Soxhlet extraction. Afterwards, three analytical methods were tested for detecting and quantifying the produced PHB. Fermentation samples stained with the Nile Red dye were analysed with both fluorescence microscopy and spectrofluorometry, and the presence of PHB granules could be confirmed. Both methods showed promising results, but further optimization is still necessary. Finally, the chloroform extracted PHB samples were successfully analysed using HPLC. The HPLC method proved to reliably identify and to relatively accurately quantify the recovered PHB. KW - Biopolymer Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-3905 ER - TY - RPRT A1 - Kashata, Mohamad Owis T1 - Strafrecht N2 - In diesem Arbeitspapier werden die juristischen Grundlagenbegriffe und aktuelle Fälle der Rechtsprechung zum Thema "Strafrecht" erörtert und mit Quellenangaben versehen. T3 - Studentische Arbeitspapiere im Bereich Recht - 13 KW - StGB KW - Verbrechen und Vergehen KW - Kausalitätstheorie KW - Strafgerichtsbarkeit Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-3885 ER - TY - THES A1 - Cremanns, Julie T1 - Age-Management: Eine Analyse zu Maßnahmen der Erhaltung der Gesundheit bei älteren Arbeitnehmern und Arbeitnehmerinnen und die Erstellung eines Age-Management-Konzepts N2 - Seit einigen Jahren werden die Folgen des demografischen Wandels immer wieder diskutiert. Prognosen sagen voraus, dass bis zum Jahr 2060 der Anteil der Menschen in Deutschland, die über 65 Jahre und älter sind, von etwa 21% (Jahr 2017) auf ca. 33% ansteigen soll (Pötzsch und Rößger, 2015, S. 17; Destatis, 2018e). Eine Ursache für den demografischen Wandel ist die steigende Lebenserwartung der Menschen (Felder, 2012, S. 614). In den Zwanzigerjahren lag die durchschnittliche Lebenserwartung bei etwa 58 Jahren (Destatis, 1987, S. 10). Für Kinder die im Jahr 2016 geboren wurden, wird eine Lebensdauer von durchschnittlich 80,6 Jahren prognostiziert (World Bank, 2018c). Auch hat das steigende Durchschnittsalter der Bevölkerung Deutschlands Auswirkungen auf den Arbeitsmarkt. Im Jahr 2013 gehörten 49,2 Millionen der Deutschen zu der Gruppe der Erwerbsfähigen (20 bis 64 Jahre) – im Jahr 2060 sollen es laut Prognosen 23% weniger sein (Pötzsch und Rößger, 2015, S. 6). Diese prognostizierten Entwicklungen sind zum einen eine Herausforderung für das deutsche Sozialversicherungssystem, zum anderen aber auch für die Arbeitgebenden (Adenauer, 2015a, S. 14ff). Neben dem generellen Einfluss der Gesundheit auf Krankenkassenausgaben ist sie auch von großer Bedeutung für das Rentensystem. Beschäftigte mit einem guten Gesundheitsstatus werden mit einer höheren Wahrscheinlichkeit das Renteneintrittsalter erreichen (Ferber et al., 2015, S. 14). Unternehmen wiederum müssen dem Fachkräftemangel entgegenwirken und auch bei den Arbeitskräften im erhöhten Alter eine solide Leistungsfähigkeit aufrechterhalten (Lutz, 2018, S. 73). Genau hier setzt das Age-Management an: Es bezeichnet einen ganzheitlichen, generationsübergreifenden und lebensphasenorientierten Ansatz, der einen Fokus auf die Arbeitsfähigkeit und Gesundheitserhaltung von (älteren) Beschäftigten legt (Hafkesbrink und Krause, 2017, S. 17; EU-OSHA, 2016). Um den Entwicklungen des demografischen Wandels entgegenwirken zu können, müssen Unternehmen ganzheitliche Maßnahmen ergreifen. Diese sollten es älteren Angestellten ermöglichen, länger zu arbeiten, aber dennoch motiviert, gesund und leistungsfähig zu sein (Hafkesbrink und Krause, 2017, S. 17; Lutz, 2018, S. 73). Anhand einer Literaturrecherche wurde in der hier vorliegenden Arbeit untersucht, welche Interventionen zur Verbesserung der Arbeitsfähigkeit und Gesundheit bei älteren Beschäftigten bestehen und wie sich daraus ein Age-Management-Konzept ableiten lässt. Die Erkenntnisse der Literaturrecherche zeigten auf, dass Maßnahmen und Konzepte zur Förderung des Wissenstransfers, der körperlichen Aktivität, einer gesunden Ernährung, der Gesundheitsbildung, der mentalen Gesundheit wie auch zur Gestaltung einer gesundheitsförderlichen Arbeitsorganisation, das Potenzial aufweisen einen positiven Beitrag für die Gesundheit und Arbeitsfähigkeit der älteren Arbeitnehmer zu leisten. Dennoch sind hierbei weitere Studien nötig, um eine evidenzbasierte Aussage treffen zu können. Auf Basis dieser Erkenntnisse, der aufbereiteten Theorie und ergänzender Literatur wurde ein Age-Management-Konzept entwickelt. KW - Age-Management KW - BGM KW - Gesundheitsförderung Y1 - 2019 ER - TY - THES A1 - Panahi, Nastasja T1 - Aggression am Arbeitsplatz: Ein integriertes Modell N2 - Aggression am Arbeitsplatz (workplace aggression) ist eine kontraproduktive Verhaltensweise, die sich negativ auf Individuen sowie Organisationen auswirkt. Mit der vorliegenden Arbeit wird das Ziel verfolgt, bereits vorhandene Aggressionsmodelle in einem vereinten Modell zu integrieren um erstmals ein umfassendes, auf den organisationalen Kontext ausgerichtetes Aggressionsmodell zu schaffen. Ziel ist es, die Frage zu beantworten welche persönlichen, sozialen sowie situativen Determinanten der Entstehung von Aggression am Arbeitsplatz zugrunde liegen und welche Auftretensformen Aggression annehmen. Zur Beantwortung dieser Frage wird das General Aggression Model von Anderson und Bushman (2002), das Theoretical-Model of Workplace Aggression sowie das Three-Factor Model of Workplace Aggression (Baron & Neuman, 1998) herangezogen. Darauf aufbauend wurde das integrierte Modell, Workplace Aggression Model (WAM), erstellt. Es bietet dem Anwender einen Überblick über die Thematik und liefert gleichzeitig Interventions- und Präventionsvorschläge. Schlüsselwörter: Aggression am Arbeitsplatz, General Aggression Model, Kontraproduktives Verhalten N2 - Workplace aggression is a counterproductive work behavior which has a negative impact on individuals and organizations. This thesis pursues the goal to integrate already existing aggression models in an united framework to provide a comprehensive aggression model that is oriented on the organizational context. The main goal is to answer the question which personal, social and situational determinants underlie the emergence of aggression in the workplace and demonstrate in which forms aggressive behavior occurs. To answer this question the General Aggression Model (Anderson & Bushman, 2002), the Theoretical-Model of Workplace Aggression and the Three-Factor Model of Workplace Aggression (Baron & Neuman, 1998) are used. Thereafter the integrative framework, Workplace Aggression Model (WAM), was constructed. It provides the user with an overview of the topic and at the same time delivers intervention and prevention propositions. Keywords: workplace aggression, general aggression model, counterproductive work behavior KW - Aggression am Arbeitsplatz KW - General aggression model KW - Kontraproduktives Verhalten KW - Counterproductive work behavior KW - Workplace aggression Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-3826 ER - TY - RPRT A1 - Dluzik, Jasmin T1 - Körperschaften, Anstalten und Stiftungen des Öffentlichen Rechts N2 - In diesem Arbeitspapier geht es um die Verwaltungsträger und Verwaltungen des Öffentlichen Rechts. T3 - Studentische Arbeitspapiere im Bereich Recht - 11 Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-3819 ER - TY - RPRT A1 - Salobir, Jan Michael T1 - Juristischer Gutachtenstil und Urteilsstil N2 - Es geht um den Juristischen Gutachenstil und Urteilsstil. Außerdem enthalten: Zitate aus der Rechtsprechung und wissenschaftliches Zitieren T3 - Studentische Arbeitspapiere im Bereich Recht - 10 KW - Gutachten KW - Urteil KW - Gutachtenstil KW - Urteilsstil KW - Wissenschaftliches Zitieren KW - Zitate aus der Rechtssprechung Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-3809 ER - TY - RPRT A1 - Masuri, Habil T1 - Öffentliches Recht N2 - Arbeitspapier zum Thema Öffentliches Recht und Theorien zur Differenzierung von Privatrecht und Öffentlichem Recht. T3 - Studentische Arbeitspapiere im Bereich Recht - 9 KW - Öffentliches Recht KW - Interessentheorien Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-3791 ER - TY - RPRT A1 - Walter, Phil T1 - Handeln der Verwaltung N2 - Es geht um verschiedene Handlungsformen der Verwaltung. Diese werden erklärt und untereinander verglichen. T3 - Studentische Arbeitspapiere im Bereich Recht - 8 Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-3780 ER - TY - RPRT A1 - Wiehe, Nicolas Leon T1 - Zivilrecht N2 - Dieses Arbeitspapier beinhaltet Informationen zu Zivilrecht, BGB, HGB, Familienrecht, Erbrecht und Sachenrecht. T3 - Studentische Arbeitspapiere im Bereich Recht - 7 KW - Zivilrecht KW - Privatrecht KW - Handelsgesetzbuch KW - HGB KW - Familienrecht KW - Sachenrecht KW - Erbrecht KW - Bürgerliches Gesetzbuch KW - BGB Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-3771 ER - TY - THES A1 - Atenkeng Tendong, Jean Carlos T1 - The Economic, Social and Environmental Valuation of the Hambach Forest. N2 - Forest ecosystems provide mankind with economic, social and environmental benefits called ecosystem goods and services. More often than not, some of these benefits are either mutually exclusive or come with negative impacts on the society or the environment. Hence, estimating the monetary value of these benefits is essential in decision making and policies on scarce natural resources. This thesis aims at estimating the monetary value of about 200 ha of the remaining Hambach forest which was once about 8,500 ha. In recent years, this forest has been the focus of numerous protests from environmentalists who believe that the German energy company RWE should not continue cutting down forest trees in order to extract its rich lignite reserves for electricity production. The environmentalists cite the loss of biodiversity and climate change as the base of their argument but fail to support this statement with an actual valuation study of the existing forest. On the contrary, RWE values the Hambach mine at €4 to €5 billion. In this light, this thesis makes a generous attempt at placing a monetary value on the 200 ha of Hambach forest using benefit transfer and meta-analysis as the main valuation techniques. Moreover, other techniques for a possible primary valuation project are elucidated. Besides, the social and environmental impacts of lignite mining are examined. Eventually, the obtained results are analyzed and discussed along with a concluding chapter on possible solutions and subsequent developments. KW - Hambach forest KW - Ecosystem services KW - Valuation KW - Benefit transfer KW - RWE Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-3732 ER - TY - THES A1 - Keiffenheim, Jan T1 - Die Produktion von Audiodateien und deren Einbindung in Videospiele N2 - In this paper the production of audio file will be shown with examples, and how these can be put exemplarily into a video game. For this purpose different types of programs will be presented which can produce audio file. To show a small expenditure, affordable or free programs will be used for this paper. After that the paper shows how to exemplarily record and edit music, sound and voice. Finally a game engine will be used to demonstrate the inset and programming of the created audio files. This paper is especially for newcomers (and students) to introduce them to audio and sound design. With the practical instructions in this paper they can start to produce audio files by their own. N2 - In dieser Bachelorarbeit wird anhand von Beispielen die Produktion von Audiodateien gezeigt, und wie diese beispielhaft in ein Videospiel eingefügt werden können. Hierzu werden zunächst die verschiedenen Programmtypen präsentiert, mit denen Audiodateien produziert werden können. Um einen möglichst geringen Kostenaufwand zu zeigen, werden Programme benutzt, die kostenlos oder kostengünstig erworben werden können. Danach wird an Beispielen gezeigt, wie mit den ausgewählten Programmen Stimmen, Geräusche und Musik aufgenommen und bearbeitet werden können. Abschließend wird an einer Spiele-Engine vorgeführt, wie die erstellten Audiodateien ins Spiel eingefügt und einprogrammiert werden. Durch diese Bachelorarbeit sollen vor allem Neueinsteiger (und Studenten) an Audio und Sound Design herangeführt werden, sodass sie mit den praktischen Unterweisungen in dieser Arbeit selbst Audiodateien produzieren können. KW - Audiobearbeitung KW - Kostengünstige Mittel & einfache Methoden KW - Audio Programmierung KW - Musik KW - Geräusche KW - Stimme Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-3494 ER - TY - THES A1 - Shaji, Anith T1 - The Implementation and Enhancement of Timesheet Management Process Based on Stored Procedure via .NET N2 - Stored Procedures perform a significant role in the implementation of complex business logic in the database management system. Web-based application systems that handle a large amount of data with complex calculation and transformation rules, they prove to improve the system efficiency, maintainability, data integrity and reliability to a large extent. This research will attempt to enhance a FoxPro based timesheet management system by implementing a web-driven Relational Database Management System with SQL based stored procedure and user-defined functions for faster and efficient data processing. The thesis explores the issues and the processing stages of the current timesheet management process and develops user-friendly responsive intranet online web-application portal with minimal processing steps. That accomplished by writing the processing logic using stored procedures in association with the user-defined table-valued and scalar-valued function in SQL Server and integrating them with Entity Framework three-tier web application architecture in ASP.NET MVC. The final timesheet booking data generated by the stored procedure is modified to a specific format using SpreadsheetLight, an open source spreadsheet library for the .NET framework for uploading the output booking file on SAP Business ByDesign web portal. Outcomes show that using stored procedures in a comprehensive business application can enhance the application performance by lessening the processing time and processing stages. KW - Stored procedures KW - SpreadsheetLight KW - Relational database management system KW - ASP.NET MVC KW - SAP Business ByDesign Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-3411 ER - TY - THES A1 - Vieten, Stefan T1 - Antimikrobielle Wirkung von Nanosilberzusätzen in Epoxidharzbeschichtungen N2 - In dieser Arbeit wurden Nanosilberpartikel (folgend: Ag-NP) in eine Epoxidharzmatrix eingearbeitet und die antimikrobielle Wirkung der nanosilberhaltigen Epoxidharz Glasrepliken am Wachstum von Bacillus subtilis und Saccharomyces cerevisiae untersucht. Ag-NP sind bekannt für ihre antimikrobielle Wirkung (Sotiriou & Pratsinis, 2010). Eine funktionale Oberfläche mit Ag-NP reduziert durch ihren antibakteriellen und antifungalen Charakter das Wachstum von Bakterien und Pilzen (Plachkov, 2006). B. subtilis verdeutlicht als Bakterium die antibakteriellen Eigenschaften der Ag-NP und S. cerevisiae als Hefepilz die antifungalen Eigenschaften der Ag-NP. Die antimikrobielle Wirksamkeit von Ag-NP ist weitgehend bekannt, viele Publikationen verdeutlichen die keimreduzierende Wirkung von Ag-NP oder Silber-Ionen. Der Grundlegende Unterschied dieser Arbeit zu vielen Publikationen über Ag-NP ist die Integrierung der Nanopartikel in eine Polymermatrix. Die Nanopartikel werden also in die Epoxidharzmatrix integriert und liegen nicht nur oberflächlich als Beschichtung vor. Die Integration von antimikrobiellen Additiven in eine Polymerstruktur hat gegenüber einer antimikrobiellen Beschichtung den Vorteil der Langlebigkeit und damit auch der Langzeitwirkung (Huppmann, 2014). Antimikrobielle Polymere können besonders für die Lebensmittelindustrie interessant sein. In der Lebensmittelindustrie ist die Besiedlung von Werkstoffoberflächen bekannt und wird in definierten Zeitintervallen durch Reinigungsmaßnahmen reduziert (Huppmann, 2014). Der Einsatz von antimikrobiellen Werkstoffen würde die mikrobiologische Kontamination stark reduzieren und könnte somit die Kosten für Reinigungsmaßnahmen verringern. Die hergestellten Epoxidharz Glasrepliken zeigten auf das Wachstum von B. subtilis ab einer Ag-NP-Konzentration von 20,35 μg/g eine Reduktion um eine Log10-Stufe, und ab einer Ag-NP-Konzentration von 40,53 μg/g eine Reduktion um zwei Log10-Stufen. Die Epoxidharz Glasrepliken mit 40,53 μg/g Ag-NP reduzierten die Keimzahl von B. subtilis um 97,98 %. Auf das Wachstum von S. cerevisiae zeigten die hergestellten Epoxidharz Glasrepliken ab einer Ag-NP-Konzentration von 9,1 μg/g eine Reduktion um eine Log10-Stufe. Die höchste der getesteten Ag-NP-Konzentrationen mit 40,53 μg/g zeigte auch eine Keimreduktion um eine Log10-Stufe. Jedoch bedeutet die Reduktion der Epoxidharz Glasreplik mit 40,53 μg/g Ag-NP eine Keimreduktion von S. cerevisiae um 94,52 %. Die Ergebnisse zeigen ein resistenteres Verhalten von S. cerevisiae gegen über B. subtilis. Y1 - 2018 ER - TY - THES A1 - Vespermann, Stefan T1 - Auswirkungen eines sechswöchigen Elektromyostimulationstraining (EMS) bei Rückenschmerzen überwiegend sitzender Menschen N2 - Hintergrund: Der populärwissenschaftliche Slogan „Sitzen ist das neue Rauchen“, der mit der Volkskrankheit „Rücken“ in Verbindung gebracht wird, soll kritisch auf einen wissenschaftlichen Wahrheitsgehalt überprüft werden. Sitzen soll dem Slogan nach zu einem höheren Risiko für Zivilisationskrankheiten und insbesondere Rückenschmerzen führen. Gleichzeitig werden EMS-Trainingseinrichtungen immer beliebter und versprechen maximalen Trainingserfolg mit vermindertem Zeitaufwand, vor allem hinsichtlich Prävention und Linderung von Rückenschmerzen. Im Rahmen dessen sollen die Auswirkungen eines sechswöchigen EMS-Trainings auf die Rückenschmerzen überwiegend sitzender Menschen ermittelt werden. Methode: 25 Probandinnen und Probanden, die einen überwiegend sitzenden Lebensstil und vor der Studie Kontakt mit Rückenschmerzen hatten, wurden in zwei Gruppen aufgeteilt (Interventionsgruppe (IG) = 13, Kontrollgruppe (KG) = 12). Die IG wurde zweimal die Woche mit einem GK-EMS-Trainingsprogramm für sechs Wochen lang trainiert, während die KG keiner Intervention nachging. Gemessen wurden die Veränderungen von sechs, mit der Rückengesundheit in Verbindung gebrachten, Faktoren: Muskelkraft, Mobilität, Körperkonstitution Rückenschmerz-intensität, häufigkeit und psychosoziale Faktoren. Aufgrund des geringen Männeranteils unter den Teilnehmenden, konnten nur die Messergebnisse der Probandinnen der Interventions- (n = 11) und Kontrollgruppe (n = 10) verglichen werden. Ergebnisse: Die durchgeführte Intervention bewirkte eine signifikante Reduktion der Rückenschmerzhäufigkeit, des Körperfettgehaltes und des Stresslevels, bei gleichzeitig signifikanter Erhöhung der subjektiv empfundenen Leistungsfähigkeit und Befindlichkeit. Eine signifikante Zunahme von Muskelmasse und -kraft, sowie eine Abnahme der Rückenschmerzintensität konnte wiederum nicht festgestellt werden. Der Kraftzuwachs war in der interventionslosen KG stellenweise sogar signifikant höher als in der der IG. Schlussfolgerung: Die Ergebnisse der Eigenstudie widerlegen die Annahme, dass die Rückengesundheit durch EMS-Training verbessert werden kann. Unter Berücksichtigung der Forschungsergebnisse anderer Wissenschaftler, die positive Effekte auf Muskelmasse und -kraft nachwiesen, lässt sich ein positiver Effekt von EMSTraining auf die Rückengesundheit ausmachen. Da keine andere Studie eine vergleichbare Probandenzusammensetzung und -voraussetzungen (überwiegend sitzend, Rückenschmerz-erfahrungen) aufweist, liefert die Eigenstudie neue Erkenntnisse. Die Vergleichbarkeit mit anderen Interventionsmöglichkeiten ist nicht möglich und bedarf weiterer Forschung. KW - EMS KW - Elektromyostimulationstraining KW - Rückenschmerzen KW - Sitzen Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-3364 ER - TY - THES A1 - Bravin, Luca T1 - Nanoprobe-based immuno-LAMP for Whole-pot Nucleic Acid-Antigen co-detection N2 - Point-of-Care testing (POCT) is a novel approach that aims to fill in the gaps by bringing state-of-art technologies to the field outside of the clinics. Several aspects of these novel technologies are currently challenging their real-world application as their use is often limited to centralized locations. Nevertheless, novel engineering approaches coupled with the current technological development are now working towards new platforms that could potentially serve to deliver these technologies at a decentralized level. Microfluidic platforms, LFAs, DNA microarrays and others are novel tools that are being explored for their potential impact in the development of Point-of-care (POC) technologies. These platforms altogether allow for the processing of a very small amount of sample in a semi-automated, miniaturized, portable device that requires little to no training from the user side. Furthermore, they allow to reach clinically-relevant results within the same device in a short amount of time without the need for logistic or time resources. Nevertheless, the sensitivity and accuracy offered by these methods is often of a lower degree when compared to standard laboratory tests. Therefore, new approaches are being explored which involve the integration of cutting-edge nanotechnology to POCT. In this project, the proof of concept of an assay for the dual detection of nucleic acid and protein biomarker was attempted using a DNA amplification technique also called, commonly referred to as immuno-PCR (iPCR). Although PCR is the most known and developed assay, this assay was designed to work with the LAMP assay. This novel technique allows the isothermal amplification of nucleic acid within a relative short incubation time thus making this a perfect candidate for a potential POC platform to be used in RLS. Furthermore, the use of different nanoprobes in the assay enabled the improvement of several aspects of the test which allows to achieve similar results to the current standard methods. Several constraints related to the use of this novel technology challenge the application of such tests field. Nevertheless, the integration of this test in a microarray platform could overcome these limitations, offering a platform that could potentially detect multiple diseases within the same test on a LOC format. Although iLAMP platform remains a promising alternative for the development of next-generation nucleic acid-based POCT, further research will be needed to assess the performance of this assay with clinical samples and determine the feasibility of DNA microarray-based detection Y1 - 2019 ER -