TY - THES A1 - Lumbers, Brock T1 - Mathematical Modelling and Simulation of Catalyst Deactivation for the Continuous Thermo-Catalytic Decomposition of Methane N2 - A clean energy future based on a hydrogen economy has been proposed as a feasible alternative to the current combustion of fossil fuels to reduce CO2 and other greenhouse gas (GHG) emissions. However, hydrogen’s “clean” reputation is questionable due to its main production method of steam methane reforming (SMR), which produces large quantities of CO2 emissions. To abide by recent international regulations, the production of hydrogen needs an immediate transition to low-emission production methods. A promising solution is the thermo-catalytic decomposition of methane (TCMD), which thermally decomposes methane into hydrogen gas and solid carbon without any direct GHG emissions. The problem with this process is that the catalyst deactivates quickly and therefore must be replaced periodically for sustained hydrogen yields. This results in high catalyst turnover costs, which is the main bottleneck in the successful commercialisation of this process. By developing a simplified model using the most commercially viable parameters and linking the turnover costs with the deactivation of the catalyst, this study aimed to accelerate the adoption of the TCMD process by better enabling companies to analyse the feasibility of their potential low-emission TCMD solutions. The most commercially viable solution featured the use of a fluidised bed reactor (FBR) for continuous operation with an iron-based catalyst due to their low-cost. Catalyst regeneration was found to be ineffective and the best method for mitigating catalyst deactivation was the optimisation of the process conditions. A simplified mathematical model was then constructed to enable this adjustment to maximise the production of hydrogen and minimise the turnover costs. This model was based on the ideal continuous stirred tank reactor but incorporated the fluidising behaviour through several variables including the development of the novel “Fluidisation Factor”. An optimisation ratio was also developed to quantify the simulation results and obtain the optimal conditions. The results showed that the ideal conditions for this process was at the highest temperature before the catalyst starts to sinter (≈950ºC) and at the maximum pressure. The largest catalyst particle size of 150 𝜇m and the maximum amount of catalyst was found to allow for higher fluidisation velocities and to delay the deactivation time respectively. The inlet gas velocity and the catalyst activity limit were found to be highly dependent on the hydrogen production rate and therefore due to the conditions used in this study the optimum inlet gas velocity was 10% of the fluidisation velocity range (and composed of pure methane), whilst the optimum activity limit was at 22% activity. Lastly, a comparison of the heating method found that controlled heating was more suitable than constant heating due to the stable temperatures during deactivation, which prevent catalyst sintering. Comparing the optimised results from this study with the SMR production method found that the estimated catalyst turnover costs were 10¢/kg H2 and 18¢/kg H2 respectively. This demonstrates that the simplified model developed in this work can better enable companies to optimise and assess the feasibility of their proposed TCMD solutions and help transition their hydrogen production processes to cleaner alternatives. KW - Low-Emission hydrogen KW - Thermo-Catalytic Methane Decomposition KW - Methane pyrolysis KW - Catalyst deactivation KW - Modelling and simulation Y1 - 2020 ER - TY - THES A1 - Meisen, Sabrina T1 - Modellierung von Ertrag und Wassergehalt von Bienenhonig aus meteorologischen und geographischen Parametern N2 - Die Witterung nimmt Einfluss auf Volkentwicklung, Ausmaß des Befalls mit Varroamilben (V. destructor) und Überwinterungserfolg von Bienenvölkern, sowie auf die Blüte nektarsekretierender Pflanzen. Inwiefern der Honigertrag pro Bienenvolk und der relative Wassergehalt des Honigs in Deutschland davon betroffen sind, ist weitestgehend unbekannt. Jährliche (2012 - 2019) und saisonale (Früh- und Spättracht) Schwankungen im Ertrag und Wassergehalt wurden mittels Varianzanalyse (ANOVA) und Multivariater Varianzanalyse (MANOVA) nachgewiesen. Ebenso wurde eine Abnahme der Erträge pro Volk der jährlichen Frühtrachternten und eine Zunahme der Erträge der Sommertrachternten 2018 und 2019 in zunehmender Höhenlage gefunden. Unterschiede zwischen Jahren, Trachten und Höhenlagen konnten durch Recherche auf Witterungsverhältnisse zurückgeführt werden. Besonders Niederschlag, Solarstrahlung und Temperatur wirken sich in erster Linie auf das Sammelverhalten der Bienen und damit auf den Ertrag aus. Dabei stieg der Ertrag pro Volk bei höherer Solarstrahlung und Temperatur, wohingegen er bei hohen Niederschlagsmengen geringer ausfiel. Des Weiteren sind jährliche Schwankungen im Wassergehalt gegenläufig zu denen des Ertrags. Bienenvolk bezogene Erträge in Großstädten fallen im Durchschnitt höher aus. Dies konnte auf ein vielfältigeres Nahrungsangebot in Städten zurückgeführt werden. Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6001 ER - TY - THES A1 - Taduri, Ajay Kumar T1 - Meso-FE Modeling of Woven Fabric to Establish the Effects of Frictional Contact between Yarns N2 - Meso scale modeling has enormous impact on outcome of final composite material. For better understanding, immense research is carried, and state of the art literature review is presented in this thesis. For geometric modeling, a meso scale model of 2x2 Twill weave pattern is imported from TexGen software. Hypo elastic constitutive model is developed for material modeling of the yarn. Inter-yarn frictional behavior is thoroughly analyzed to explore the effects of different frictional models and contact types, to produce a cost-effective process on the outcome of final composite product. For an efficient investigation, a meso-finite elemental analysis is performed by replicating picture frame test virtually in Abaqus/Explicit solver. Suitable contact formulation and multiple friction models are used to input the frictional parameters on meso scale model. Finally, the simulation results are then validated by comparing between corresponding contact algorithms and frictional models. Objective of this thesis: The main objective is to determine the mechanical properties, concentrating on effects of friction of a Twill pattern weave by performing virtual simulations by replicating picture frame test (PFT). Solution process: Adequate literature research is accomplished for better understanding of concepts of simulation. In material modeling, hypo elastic material is defined for material properties is imported through VUMAT. Multiple frictional models, including VFRIC and VFRICTION are added to the model to define frictional behavior. In-plane shear deformations are calculated by numerical simulations virtually in Abaqus/Explicit solver and then results are examined. Key Results: Satisfied simulation results are obtained as expected. The frictional behavior between yarns is sensitive to contact algorithms and friction models, and quality of material modeling. The shear locking phenomenon is captured beyond 55-degree shear angle and observed that regardless of value of coefficient of friction yarns, the type of frictional models influences simulation results and force values. KW - Meso scale modeling KW - Woven textiles KW - 2x2 Twill model KW - Inter-yarn friction KW - Periodic boundary conditions KW - Contact algorithm Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-5931 ER - TY - THES A1 - Klose, Marian T1 - Optimierung der Krebstherapie durch Inhibition von MDR1 N2 - MDR1 (Multidrug Resistance Protein 1) stellt ein Membranprotein dar, welches das Ziel hat, den Körper vor Toxinen und Xenobiotika zu schützen. Dieser Schutzmechanismus kann sich allerdings erheblich auf die Chemotherapie auswirken, indem Wirkstoffe aus der Zielzelle heraustransportiert werden. Da der Effekt von MDR1 in einigen Fällen unerwünscht ist, kommt es zum Einsatz von Inhibitoren. Diese lassen sich je nach Toxizität und Herkunft in verschiedene Kategorien einteilen. Diese Arbeit gibt zunächst einen wissenschaftlichen Hintergrund. Zuerst werden Multiwirkstoffresistenzen im allgemeinen beschrieben, bevor MDR1 genauer beleuchtet wird. Danach werden verschiedene Bereiche der Krebserkrankung erläutert, um im Anschluss die unterschiedlichen Klassen der Inhibitoren vorzustellen. Die Diskussion schildert schlussendlich sowohl Chancen als auch Risiken der Inhibition und setzt diese in ein Verhältnis. Zusammenfassend lässt sich sagen, dass es in der Chemotherapie vermehrt zu Wirkstoffresistenzen kommt. Krebszellen adaptieren und ändern ihre Genexpression, sodass altbewährte Medikamente nicht mehr greifen. Die Inhibition könnte dies umkehren, bringt aber zusätzliche Nebenwirkungen mit sich, sodass sich keine klare Empfehlung zugunsten der Inhibition von MDR1 geben lässt. KW - Krebs KW - MDR1 KW - P-Glykoprotein KW - Optimierung Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-4427 ER - TY - THES A1 - Hartmann, Sören T1 - Regulation of dendritic migration in response to BCG N2 - As tuberculosis is still the number one leading cause of death in humans due to a single infectious agent, prevention of infection is a key tactic in fighting it. Even though the vaccine BCG exists for tuberculosis since the beginning of the 20thcen-tury, it lacks efficacy and does not provide sustainable protection. An important step to develop a long-term immunity is the expansion of antigen-specific T cells in the lymph node. For T-cell priming to occur, the pathogen and/or its antigen has to be transported from the site of infection to the T-cell zone of the draining lymph node. This step is done by migratory Dendritic cells (DCs). DCs reside as sentinels in tis-sue, where after pathogen encounter, internalize the pathogen, process its antigens and migrate to the draining lymph node. Using a modified protocol, developed by Bollampali et al. (2015), during a previous study done Dr. Rothfuchs team, we investigated the mechanisms involved in the migration of DCs after injection of BCG. For this we injected mice with different inhibitors and recep-tor antagonists. It is worth mentioning that in a yet unpublished previous work we in-hibited the enzymes COX-1 and COX-2 systemically, using indomethacin, and showed a decreased number of DCs migrating to the draining popliteal lymph node after BCG in-jection compared to mice not injected with the inhibitor. Following our experiment, we decided to investigate the receptors of one of the down-stream products of COX, PGE2 and the corresponding receptors EP2 and EP4. Based on other studies two of the four receptors of PGE2, EP2 and EP4, are important for the mi-gration of DCs. We then injected mice with antagonists for these two either separate or simultaneously. Even though their affinities and the sustainability of the reaction caus-ing PGE2signalling are different, both receptors were able to compensate for each other, but a decreased number of DCs were found in the lymph node when both antagonists were injected. This and the results of the COX inhibition suggest a role for PGE2 on DC migration. Based on these results we decided to look at MMP-9, a molecule regulated by PGE2 sig-nalling. However, inhibition of MMP-9 in our model did not impact on DC migration. It is unclear if treatment with the MMP-9 inhibitor used failed or if MMP-9 is indeed not important in BCG-triggered DC migration. In conclusion in this thesis we show a role for EP2 and EP4 on DC migration after BCG injection but failed to show the same for MMP-9. Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-4969 ER - TY - THES A1 - Hoffmann, Annika T1 - Prüfung eines Anlagenreinigungsprozesses in der Kosmetikindustrie und vergleichende Analyse der Wirksamkeit der eingesetzten Reinigungsmittel und Desinfektionsmittel N2 - Kosmetika haben einen hohen Stellenwert in unserer heutigen Gesellschaft und der pro Kopf Konsum der immer vielfältiger werdenden Produkte wächst stetig an. Um einen hohen Sicherheits- und Qualitätsstandard des Kosmetikums zu gewährleisten, ist die Sauberkeit der Produktionsanlage fundamental [IKW, 2019; DIN EN ISO 22716: 2008]. Die chemischen und mikrobiologischen Parameter, welche das Reinigungsergebnis beeinflussen, wurden am Beispiel der Tubenabfüllanlage der bb med. product GmbH untersucht und bewertet. Die chemische Rückstandsanalyse, welche mittels pH-Wert Messung der letzten Spülflotte durchgeführt wurde, diente dem Nachweis von Peressigsäurerückständen. Die Messergebnisse lieferten keinen Verdacht auf gesundheitsgefährdende Rückstände in der Produktionsanlage. Der mikrobiologische Zustand der Anlagenoberflächen wurde mittels Tupferverfahren überprüft. Die Auswertung zeigte, dass die Oberflächenkeimzahl gegenüber dem Richtwert um ein Vielfaches erhöht war. Die Wirksamkeit der eingesetzten Prozesschemikalien wurde in praxisnahen Versuchen ermittelt, bei denen Polyvinylchlorid-Oberflächen und Edelstahloberflächen artifiziell mit verschiedenen Matrices aus Sheabutter und Rinderblutserum kontaminiert wurden, in welche die Prüfkeime Staphylococcus aureus und Pseudomonas aeruginosa eingebettet wurden. Die Simulation verschiedener Anwendungsbedingungen zeigte signifikante Korrelationen zwischen dem Reduktionsfaktor, der Beschaffenheit des Oberflächenmaterials und der Art der Anschmutzung. Auf Edelstahl ließen sich konstant höhere Reduktionen erzielen als auf den PVC-Oberflächen. Des Weiteren konnte die fetthaltige Sheabutter Kontamination mit einer verminderten Wirksamkeit der Reinigungsmittel und insbesondere der Desinfektionsmittel assoziiert werden. Der zusätzliche Einfluss mechanischer Energie trug nicht eindeutig zur Steigerung der Reduktionsleistung bei. Zwischen den geprüften Desinfektionsmitteln auf der Basis von Glutaraldehyd, Isopropanol und Peressigsäure konnten keine signifikanten Wirkungsunterschiede festgestellt werden. Das alkalische Reinigungsmittel, welches auf Alkohol- und Alkoholethoxylatbasiert, wies in einigen Versuchsreigen mit P. aeruginosa eine signifikant höhere Wirksamkeit als Sodium-Laureth-Sulfat und Sodium-Coco-Sulfat auf. Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-5378 ER - TY - THES A1 - Gondokusumo, Jasmine T1 - The Impact of Commoditization on Competitor Landscapes and Measures to Win the Power Play (A case study of vitamin D3 industry) N2 - Synthetic vitamin industry is commoditizing. Vitamin companies should be aware of the commoditization phenomenon in order to stay competitive. By knowing the right strategy, vitamin producers can retain market share and still maintain profit in a commoditizing market. There is an increasing competition from the new entrants. Most of them are coming from Asian countries with the advantage of lower production cost. As a result, they oversupply the market with lower price products and change the product value proposition. They take incumbents’ market share gradually, starting from the mass market. This thesis utilized qualitative approach to examine the problem. The author conducted interviews with representatives from BASF to provide internal perspectives, and BASF’s customer to provide external perspective. In order to assess the countermeasure that has been done by other companies, comparative case studies was deployed. Vitamin C industry case study was used as a base to understand the commoditization in vitamin D3 industry. As a result, similar commoditization pattern can be seen in vitamin D3 industry. However, vitamin D3 industry is not commoditizing at the same pace as vitamin C industry due to different market size and complexity of production. In the formulation stage, commoditization rate of vitamin D3 product depends on the product form. The strategies to face commoditization revolved around the aspects of positioning, relationship, image, efficiency, pricing and innovation. KW - Commoditization Y1 - 2020 ER - TY - THES A1 - Samuel Varghese, Bitty T1 - Development of a Self Learning Agent to control a Gas Network Simulator N2 - Natural gas is an indispensable source of energy for industrial and domestic purposes, hence distribution and trade demands competition. In gas distribution, optimizing is a crucial task involving control decision on the network elements with respect to trader’s demand at the boundary nodes. The application of artificial intelligence is becoming popular in diverse domains, making its role in gas transport networks more and more interesting. The opposite interest of the players in the network is the reason behind the thought of establishing a game analogy here. The agents as players act on the basis of the opponent’s action. Since both agents perform actions from different space, a neural network model is designed for the dispatcher agent to learn to make decisions for active elements based on its experience from the sample gas transport network. Behavior of the network and its elements is depicted using an optimized gas network simulator. The representation of the gas transport network and its state is digitally transformed so that it is able to extract the features by an artificial neural network representing the environment and its rules. With the help of the trained neural network, the dispatcher agent decides the control decisions with less accumulated penalties. The results and findings of the proposed method are subjected to a comparison with the interval halving method. The results of the study will open the door for further research possibilities. KW - Gas transport network simulator KW - Trader agent KW - Dispatcher agent KW - Deep reinforcement learning KW - Interval halving KW - Monte-Carlo tree search Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-8025 ER - TY - THES A1 - Jistel, Roland T1 - Male Refugees & Prostitution in Germany: Applying Bourdieu's Theory of The Forms of Capital on Sex Work to Analyze Refugees' Integration in German Society N2 - Due to the influx of refugee men into Germany over the past years, there is a growing interest in studying how integration can be achieved. This paper joins this conversation on how we can try to measure and understand integration in the context of which possibilities are offered by sex work. Analysing through the lens of Bourdieu’s forms of capital, and illustrating how refugee men use sex work to initiate upward social movement. For this paper seven MRSW (Male Refugee Sex Workers) were interviewed. The collected data was evaluated by the method of qualitative content analysis and by taking various important analytical categories (motivations, identity, practice) supported by the existing literature, into consideration. The findings show that MRSW use sex work in diverse ways, in order to generate different kinds of profits: While raising economic capital served as the main motivation, cultural and social capitals were generated as well. Language skills, peer bonding, and being able to understand German culture served as the greatest outcomes of sex work. As the motive, we can see that financial instability drives MRSW to sex work, but that social media plays a huge role in making sex work appear as a efficient and feasible option. For the interviewed MRSW in this research, sex work did show to have a positive impact on their ability and capability to integrate into German society. KW - Migration KW - Integration KW - Sex Work KW - Qualitative research KW - Refugees Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-8106 ER - TY - THES A1 - Zerwas, Marvin T1 - Financial Stability of Football Clubs: Theoretical Background and Empirical Analysis of Selected European Clubs N2 - Professional football's economic attractiveness is enormous due to its popularity and broad anchoring in society. Consequently, the conditions for clubs have also changed. Today it is not only important to be successful in sports, but also to do business in a solid and sustainable way. Nevertheless, many clubs are still not able to do so. This is due on the one hand to a lack of experience and deficits in the management and control systems and on the other hand to the mindset to buy sporting success by all means. This frequently leads to clubs operating beyond their means and regularly posting high losses. Sustainable investments and future growth are often disregarded. That is why UEFA decided to introduce the Financial Fair play regulations in the year 2013. The rule is in place to avoid debt and to ensure healthy business operations over the long term. The analysis shows that in 2018 clubs will be more focused on using less debt to finance their activities and will be able to pay more debt than in 2012. KW - Football clubs KW - UEFA KW - Financial Fairplay KW - Ratio analysis KW - Financing Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6322 ER - TY - THES A1 - Babenko, Anastasiia T1 - Development of an ESI-MS/MS-based method for the quantification of acylcarnitines in murine tissue N2 - Acylcarnitines serve as transporters of activated fatty acids into mitochondria for β-oxidation - the major source of the cell’s energy and are considered as indicative markers for various metabolic disorders. The investigation of acylcarnitines in cell and tissue samples is a particularly complicated task due to their low abundance and high heterogeneity. This requires applications of sophisticated lipid separation methods. The purpose of this work was the development of an ESI-MS/MS method for the quantification of acylcarnitines with high specificity and reliability for the identification of low abundant acylcarnitine species in complex samples. General aspects of acylcarnitine analysis, including several types of solid-phase extraction, and derivatization with liquid extraction were investigated using commercially available acylcarnitine standards. The established experimental workflows, including an optimized cation-exchange extraction and derivatization with liquid extraction, were successfully applied to quantify acylcarnitine species in samples of biological origin. Consequently, murine brain tissue samples were quantitatively analyzed using two extraction procedures. The method developed in the study can be used for the qualitative and quantitative analysis of acylcarnitines in different biological samples. Y1 - 2020 ER - TY - THES A1 - Schneider, Mike T1 - Untersuchung der zeitaufgelösten Orangenölausbeute am Beispiel einer Wasserdampfdestillation im Technikumsmaßstab N2 - Bei der industriellen Saftherstellung fallen große Mengen an Orangenschalen als Abfallprodukte an. Hierbei stellt sich die Frage: Wie können diese Stoffe wirtschaftlich und ökologisch zur Ölgewinnung verwertet werden, sodass ein nutzbares Endprodukt entsteht? Das Ziel ist es, ein Orangenöl herzustellen, mit einem hohen Einzelstoffvorkommen an Limonen, mithilfe der Wasserdampfdestillation und einer speziellen eigenen Trennmethodik zu entwickeln. Die Trennung von fluiden Stoffen wird erläutert und sichtbar dargestellt. Während des Destillationsprozesses entstehen unterschiedliche Heizleistungen, die im Verlauf dieser Arbeit zur Ölausbeute zum Zeitfaktor angepasst werden. Die erstellten Diagramme geben Aufschluss über die Dauer und die unterschiedlichen Heizleistungseinstellungen. Eine Trennung der Phasen während des Destillierprozesses wird detailliert dargestellt. Das hier verwendete Trennverfahren könnte zu weiteren Forschungsansätzen dienen und weiter ausgebaut werden. Das bedeutet, dass die Destillationszeit anhand des verwendeten Verfahrens eingegrenzt werden kann. Die verminderte Destillationszeit, führt zu Prozessoptimierung, welches durch die Energieeinsparung Produktionskosten senken könnte. Die gewonnene Ölausbeute in finanzieller und ökologischer Sichtweise könnte einen industriellen Nutzen darstellen. KW - Orangenschalen KW - Destillation KW - Destillationszeiten KW - Limonen KW - Bestimmung der Destillationsausbeute Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6374 ER - TY - THES A1 - Raza, Adil T1 - Technological Implementation According to the Market Needs in the Elderly Care Industry N2 - In Germany, there are almost 15,000 nursing care services that collect information about people in need of care on a daily basis. At present, elderly homes use manual processes for data collection, which leads to poor data quality, considerable inefficiency and burden on the caregiving staff. This thesis describes the current market situation and proposes a technological solution on how to improve the quality, effectivity, and efficiency of the elderly care sector by using data collection and utilisation techniques. Moreover, it justifies the advantages of technological usage, which assists the caregiving staff in relieving the burden of daily tasks and, importantly, helps to collect high-quality data that could be used to do predictive analysis and automate the monotonous processes involved in the elderly homes. A well-documented fully functional digital application prototype was developed and tested by the elderly health industry related individuals of different age groups. The digitisation of the data collection process played a significant role in the collection of high-quality data. Furthermore, the results indicate that usage of that data has a direct correlation with the emergency response time, which could be reduced by almost half. However, further research is required to improve the predictive analysis system and the user experience of the application. KW - Nursing homes KW - Caregiving staff KW - Doctors KW - Automation KW - Predictive analysis KW - Data collection KW - Data utilisation KW - Digital application Y1 - 2020 ER - TY - THES A1 - Medvedeva, Olga T1 - What Marketing Strategies Are Used in the Shipping Industry? N2 - This work is dedicated to marketing strategies used in the shipping industry. During a collection of current data about the strategies of four maritime companies from Germany, Sweden, Russia and Turkey, an empirical study with a qualitative research method of one-on-one interviews was applied. The results of the work demonstrate an active use of both traditional and digital marketing strategies such as direct mail, printed media in a form of catalogues and magazines, telemarketing, trade shows, sales promotions, face-to-face communication, email marketing, website, SEM (Search Engine Marketing), SMM (Social Media Marketing), blogging and video marketing in all the interviewed enterprises. Brand creation is important in the shipping industry and is the main reason for an implementation of marketing strategies by maritime firms due to a great amount of advantages a strong brand brings. When measuring the effectiveness of the success of implied marketing strategies, non-financial metrics are more important for shipping firms than the financial ones due to their ability to measure some elements that are related to both a brand and a shipping enterprise such as market share, customer counts, take rate, churn rate, retention rate, customer satisfaction, occupancy of a shipping enterprise with orders, delivery time and variation order. KW - Business-to-Business Marketing KW - Brand creation KW - Marketing strategies KW - Shipping industry Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6920 ER - TY - THES A1 - Giebel, Alice T1 - Cloning Of Human Secretory Gelsolin In Pichia Pastoris N2 - The production of recombinant proteins plays an important part in biotechnology for over 30 years. Their applications range from pharmaceutical practice up to industrial (non-medical) purposes and, therefore, show great importance in today´s life. Most recombinant proteins are being produced by genetic modification of microorganisms to either generate those intracellularly or to secrete the desired protein into their surroundings. Dependent of the expression mechanism, the production can be influenced and improved to achieve high yields and protein purity. One aim of this study was to determine and optimise the most favorable cloning strategy for the expression and secretion of the plasma form of the actin binding protein gelsolin from Pichia pastoris. Gelsolin has two isoforms of which one of them gained particular attention due to its application in research projects concerning the current COVID-19 pandemic. For this project, a variety of oligonucleotide primers were designed to amplify the whole sequences and various parts of both gelsolin isoforms during PCR approaches. The accuracy and efficacy of primers is determined by several factors such as their length and exact structure. Also, many factors depending on the sequence of interest are influencing the outcome of the PCR. Therefore, the second aim of this study was to design and validate primer pairs with most preferable conditions to amplify the sequence for the expression of gelsolin and optimise the PCR conditions for this purpose. Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6585 ER - TY - THES A1 - Rzodeczko, Jessica T1 - Gesundheitsfördernde Hochschulen - Eine qualitative Inhaltsanalyse zur lebensweltbezogenen Gesundheitsförderung an Hochschulen in Nordrhein-Westfalen N2 - Als Forschungsinstitutionen und Arbeitsstätten stehen Hochschulen in der sozialen Verantwortung, das Wohlbefinden und die Gesundheit der Hochschulgemeinschaft zu sichern und zukünftige Entscheidungsträger*innen sowie Multiplikatoren für die Gesundheitsförderung zu sensibilisieren. Durch die repräsentative Untersuchung „Gesundheitsförderung an deutschen Hochschulen“ von Michel et. al (2018) wurde deutlich, dass deutsche Hochschulen trotz der langjährigen Thematisierung von Gesundheitsförderung durch Expert*innen auf politischer wie wissenschaftlicher Ebene, nach wie vor Defizite aufweisen. Mit dem Rahmenvertrag „Gute Beschäftigungsbedingungen für das Hochschulpersonal“ setzte NRW bundesweit einen hohen Maßstab. Seine Auswirkungen auf die Beschäftigungsbedingungen waren zu diesem Zeitpunkt noch nicht absehbar und gaben mit den Erkenntnissen von Michel et. al (2018) den Anlass, das Thema innerhalb NRWs neu zu untersuchen. Das Ziel der Masterarbeit besteht darin herauszufinden, wie sich aktuell die Arbeit von Gesundheitsbeauftragten, Gesundheitsmanager*innen und Gesundheitskoordinatoren an Hochschulen in Nordrhein-Westfalen gestaltet, woran sie sich bei der Weiterentwicklung ihrer Berufspraxis orientieren und wie sie den zunehmenden psychischen Belastungsfaktoren ihrer Hochschulgemeinschaft begegnen. Um die Thematik hinreichend zu bearbeiten, wurden sechs Expert*inneninterviews mit Verantwortlichen in NRW geführt. Der Leitfaden zu den Interviews wurde auf Grundlage der zehn Gütekriterien des AGH sowie der Ergebnisse der repräsentativen Erhebung von Michel et. al (2018) konzipiert. Auf Basis des generierten Datenmaterials wurde unter Zuhilfenahme eines erstellten Kategoriensystems anschließend eine qualitative Inhaltsanalyse nach Mayring (2015) und den Modifikationen nach Steigleder (2008) angefertigt, um „einen Querschnitt durch das Material zu legen“ (Mayring, 2015: 67) und den Umsetzungsstand an den Hochschulen darstellen zu können. Gemessen an den zehn Gütekriterien des AGH und den Ausführungen der Expert*innen haben die jeweiligen untersuchten Hochschulen noch einen langen Weg vor sich, um sich als „Gesundheitsfördernde Hochschule“ bezeichnen zu können. Hinsichtlich der Umsetzung lebensweltbezogener Gesundheitsförderung und im Vergleich zum bisher dokumentierten Stand durch Michel et. al (2018) können jedoch positive Entwicklungen verzeichnet werden, die zeigen, dass Gesundheitsförderung zunehmend in der Handlungspraxis der Hochschulen in NRW anzukommen scheint. KW - Gesundheitsfördernde Hochschulen KW - Gesundheitsförderung an Hochschulen KW - Hochschulische Gesundheitsförderung KW - Hochschulisches Gesundheitsmanagement KW - Betriebliches Gesundheitsmanagement KW - Gesundheitsfördernde Hochschulen KW - Gesundheitsförderung an Hochschulen KW - Hochschulische Gesundheitsförderung KW - Hochschulisches Gesundheitsmanagement KW - Betriebliches Gesundheitsmanagement Y1 - 2020 ER - TY - RPRT A1 - Neuberger, Sabine A1 - Darr, Dietrich T1 - Unterstützung von Innovationsprozessen in der deutsch-niederländischen Grenzregion N2 - Das Projekt Food Pro-tec-ts wurde initiiert um hochklassige, technologische Innovationen in den deutsch-niederländischen Wirtschaftsraum zu bringen. Im Projekt kooperierten Unternehmen beider Länder mit Innovationsexpertinnen und -experten innerhalb verschiedener Technologiecluster unter der Zielvorgabe, neue und neuartige Technologien gemeinsam zu entwickeln und ihre Handhabung zu erlernen. (Mehr Informationen zum Projekt finden Sie unter: https://www.foodprotects.eu/ ) Im Rahmen des Projekts wurden Unternehmen während des Innovationsprozesses untersucht. Dabei fiel auf, dass an Innovationen arbeitende Unternehmen häufig nicht wissen, welche Ansprechpartner Ihnen im Rahmen dieser Prozesse zur Verfügung stehen. Ein Grund dafür ist, dass Unternehmen oft nicht entsprechende Mittel zur Verfügung haben, sich intensiv mit einer Suche nach Ansprechpersonen zu beschäftigen. Ein weiterer Grund ist, dass das Angebot im Internet oft unübersichtlich ist und die Suche nach geeigneten Experten viel Zeit kostet. Erste Anlaufstelle vieler Unternehmen auf der Suche nach Unterstützung ist das Internet. Doch es ist nicht so einfach, schnell die gesuchten Informationen zu finden –zu groß ist bereits die Anzahl der gezeigten Ergebnisse um herausfiltern zu können, welche Unterstützungsinstrumente noch aktuell sind. Um Unternehmen diesen Suchprozess zu erleichtern, wurde diese Untersuchung durchgeführt und Webseiten entsprechend ihrer Angebote analysiert. KW - Innovationsprozesse Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6696 ER - TY - JOUR T1 - 30/2020 Dritte Änderungssatzung zur Ordnung zur Kompensation der Folgen der Coronavirus SARS-CoV-2-Epidemie für Studium und Lehre an der Hochschule Rhein-Waal T3 - Amtliche Bekanntmachungen der Hochschule Rhein-Waal - 2020-30 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6518 VL - 2020 IS - 30 ER - TY - THES A1 - Mulani, Arshad T1 - Modelling and Multi-Objective Optimization of a Building Heating Generation System: A case study of Hechingen, Germany N2 - Nowadays, the world is facing major environmental problems such as climate change and energy scarcity. If we consider only European countries, Heating and cooling industry accounts for more than half of the total EU’s energy consumption. And about 75% of the heat is generated by using fossil fuels. Therefore, the major non-renewable energy sources are depleting at the rapid rate and at the same time also producing the climate-changing greenhouse gases. To achieve the climate change objectives, optimised and efficient use of the energy and the decarbonisation of the heating systems are some of the critical steps. The investigation process in this thesis involves the modelling and modifying the case study heating system by using Energy Plus and Design-Builder whole building energy simulation software. It also includes the investigation of the three different possible renewable and non-renewable solutions to optimize the current heating system and analyse their effects in terms of total energy consumption (Gas and Electricity consumption) Economic benefits, environmental and other benefits. With the detail and adequate data inputs modelling and desired modifications has been done to the heating system and the building properties. The annual simulation has been performed to all the three cases and the results have been analysed. The outcome of the analysis of the results shows a significant improvement in overall energy and electricity consumption. Also provides a detailed insight into the total economical investment needed in all three cases and simple payback periods for the investments. And Most importantly the results replicate the environmental benefits such as a considerable reduction in the overall emissions of greenhouse and other toxic gases. Y1 - 2020 ER - TY - JOUR T1 - 29/2020 Erste Änderungssatzung zur Wahlordnung zu den Gremien und Organen der Hochschule Rhein-Waal T3 - Amtliche Bekanntmachungen der Hochschule Rhein-Waal - 2020-29 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6506 VL - 2020 IS - 29 ER - TY - JOUR T1 - 28/2020 Ordnung zur Feststellung der studiengangsbezogenen künstlerisch-gestalterischen Eignung für den Masterstudiengang Design and Interaction der Fakultät Kommunikation und Umwelt an der Hochschule Rhein-Waal T3 - Amtliche Bekanntmachungen der Hochschule Rhein-Waal - 2020-28 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6489 VL - 2020 IS - 28 ER - TY - JOUR T1 - 27/2020 Prüfungsordnung für den Masterstudiengang Design and Interaction der Fakultät Kommunikation und Umwelt an der Hochschule Rhein-Waal T3 - Amtliche Bekanntmachungen der Hochschule Rhein-Waal - 2020-27 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6462 VL - 2020 IS - 27 ER - TY - JOUR T1 - 26/2020 Prüfungsordnung für den Bachelorstudiengang Communication and Information Engineering der Fakultät Kommunikation und Umwelt an der Hochschule Rhein-Waal T3 - Amtliche Bekanntmachungen der Hochschule Rhein-Waal - 2020-26 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6454 VL - 2020 IS - 26 ER - TY - JOUR T1 - 25/2020 Verschiebung der Wahlen zu Gremien und Organen der Hochschule Rhein-Waal und Festsetzung des Wahltermins T3 - Amtliche Bekanntmachungen der Hochschule Rhein-Waal - 2020-25 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6431 VL - 2020 IS - 25 ER - TY - JOUR T1 - 24/2020 Verschiebung der Wahl zum Allgemeinen Studierendenausschuss der Hochschule Rhein-Waal T3 - Amtliche Bekanntmachungen der Hochschule Rhein-Waal - 2020-24 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6429 VL - 2020 IS - 24 ER - TY - JOUR T1 - 23/2020 Verschiebung der Wahlen zu den Gremien der Studierendenschaft der Hochschule Rhein-Waal T3 - Amtliche Bekanntmachungen der Hochschule Rhein-Waal - 2020-23 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6413 VL - 2020 IS - 23 ER - TY - THES A1 - Meger, Moritz T1 - Einfluss von Schichtarbeit auf die Gesundheit - Analyse des Gesundheitszustands von Pflegekräften in einem Krankenhaus mit präventiven Handlungsempfehlungen N2 - Im Gesundheitswesen, im Handel und Gastgewerbe, sowie vielen weiteren Branchen,arbeiten zahlreiche Beschäftigte in einer 24-Stunden-Arbeits- und -Dienstleistungswelt (Deutsche Gesetzliche Unfallversicherung e. V. (DGUV), 2012, S. 11). Am Beispiel der Gesundheitsversorgung wird deutlich, wie unumgänglich Schichtarbeit ist. Die Versorgung von Patienten in Krankenhäusern muss hierfür rund um die Uhr gegeben sein (Beermann, 2008, S. 2). Es weisen zahlreiche Studien auf gesundheitliche Beeinträchtigungen aufgrund von Schichtarbeit hin. Durch Schichtarbeit kann es zu einer physiologischen Desynchronisation kommen, das heißt, dass der Körper gegen seine „innere Uhr“ arbeiten muss. Somit ist die Arbeit kurzfristig mit einer erhöhten körperlichen und psychischen Beanspruchung verbunden und kann langfristig zu einem höheren Risiko für gravierende Erkrankungen führen. Infolgedessen kann es z.B. zu Schlafstörungen, gastrointestinalen Beschwerden, kardiovaskulären Störungen und zur Beeinflussung des Wohlbefindens kommen (Angerer, 2017, S. 404ff, Beermann, 2008, S. 4). Die vorliegende Arbeit untersucht den Einfluss von Schichtarbeit auf die Gesundheit von Pflegekräften. Ziel ist es, zunächst eine Erkenntnis darüber zu gewinnen, wie sich Schichtarbeit auf die Gesundheit von Pflegekräften auswirkt und welche Faktoren die Gesundheit beeinflussen. Dazu wurden Pflegekräfte von Krankenhäusern des Katholischen-Karl-Leisner Klinikums zu ihrem aktuellen Gesundheitszustand befragt. Insgesamt nahmen daran 83 Pflegekräfte teil. Die Stichprobe wurde dabei in zwei Gruppen aufgeteilt, in die Gruppe der Tagarbeiter (n= 13) und die Gruppe der Nachtarbeiter (n= 70). Dabei zeigte sich, dass sich Nachtarbeiter signifikant stärker von kurzen Schichtwechseln und vom Umgang mit Kollegen belastet fühlen. Auch die gesundheitlichen Beeinträchtigungen „Erhöhte Tagesschläfrigkeit“, „Kopfschmerzen“, „Konzentrationsstörungen“, „Energielosigkeit“, „Erschöpfung“ und „Bauch-, Magenschmerzen“ sowie „Stimmungsschwankungen“ waren signifikant stärker bei den Nachtarbeitern ausgeprägt. Anhand der Ergebnisse wurden präventive Handlungsempfehlungen abgeleitet. Auf Grundlage der Ergebnisse, ist es empfehlenswert, den Mitarbeitern präventive Maßnahmen zu ermöglichen. Das Betriebliche Gesundheitsmanagement bietet dafür einen Ansatz und sollte die Thematik Schichtarbeit besonders berücksichtigen. Als Präventionsmaßnahmen werden verhaltenspräventive Maßnahmen, wie zum Beispiel ein erholsamer Schlaf, aber auch verhältnispräventive Maßnahmen, wie die Optimierung des Schichtplans, genannt. KW - Schichtarbeit Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-5996 ER - TY - THES A1 - Schwab, Valentina T1 - Welche Faktoren erleben Fachkräfte, die im Ambulant Betreuten Wohnen (ABW) für Menschen mit Behinderung tätig sind, im Rahmen ihrer Arbeit als belastend? N2 - Betrachtet man den Forschungsstand zu der Mitarbeitendenbelastung in der Heil-/ Rehabilitations- bzw. Behindertenpädagogik, wird deutlich, dass vor allem die Mitarbeitendenbelastung in der ambulanten Unterstützung von Menschen mit Behinderung bisher kaum beforscht wurde. Da auch die Arbeit mit Menschen mit Behinderung hohe Anforderungen an die Professionellen stellt, ist es notwendig, potenziell belastende Arbeitsfaktoren zu identifizieren, um in einem nächsten Schritt geeignete Maßnahmen zum Schutz der Mitarbeitendengesundheit entwickeln zu können. Im Rahmen dieser Forschungsarbeit wird mit teilstandardisierten Interviews erhoben, welche Faktoren Fachkräfte, die im Ambulant Unterstützten Wohnen für Menschen mit Behinderung tätig sind, als belastend empfinden. Gewonnen wurden diese Erkenntnisse durch die Befragung pädagogischer Fachkräfte, welche zum Untersuchungszeitpunkt bei zwei verschiedenen Einrichtungen im Stadtgebiet Dortmund angestellt waren. KW - Ambulant Betreutes Wohnen KW - Mitarbeitergesundheit KW - Menschen mit Behinderung KW - Arbeitsbelastung KW - Pädagogische Fachkräfte Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-5571 ER - TY - THES A1 - Vögerl, Jakob T1 - Assessing the effect of N-fertilisation on biomass development and plant interactions in the ancient Milpa compared to pure stands and its potential to reduce fertiliser inputs in traditional small-scale farming N2 - Over the past years, nitrogen (N) fertilisation has been identified as an issue that has a major negative impact on the environment. Therefore, sustainable agricultural practices aim to reduce external fertiliser inputs and focus more on naturally available resources and sustainable cropping practices. One example of that is the ancient milpa polyculture which is practised by traditional small-scale farmers in Central America. It consists of climbing bean (Phaseolus vulgaris var. vulgaris), maize (Zea mays), and squash (Cucurbita moschata) that are said to represent a holistic symbiosis in which beans assume the task to accumulate additional nitrogen via N2-fixation and subsequently transfer it to its companions. The potential of intercropping, and thus nitrogen transfer to level out and reduce nitrogen fertiliser inputs compared to monocultures has not been assessed yet and little is known about the resulting practical implementation for small-scale farmers. Therefore, a pot trial with monoculture treatments (100 kg N/ha) of each crop and milpa treatments with varying levels of nitrogen fertilisation (0, 25, 50, 75, and 100 kg N/ha) was established. The intercropped beans were labelled with the 15N isotope using the cotton wick method to track nitrogen transfer in the system. Further, the Land Equivalent Ratio (LER) was used to determine the productivity of the system. Results showed that all polyculture treatments performed similarly or significantly better than the pure stands in terms of total dry matter content per pot. Milpas provided with 100 and 25% of the recommended nitrogen rate were most productive and achieved a total LER of 1.25 and 1.30, respectively. Also, the non-fertilised milpa was still as productive as the respective plants grown in a monoculture. Due to external reasons, the importance of nitrogen transfer and the related microorganisms could not be evaluated. However, growing a milpa instead of monocultures enables farmers to greatly reduce N fertiliser inputs and provides higher yields in the growing season, while other intercropping benefits are also present. It further has the potential to maintain yields and enhance natural nutrient cycling even if no fertiliser is applied. KW - Milpa KW - Three sisters KW - Nitrogen transfer KW - Intercropping Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6214 ER - TY - THES A1 - Hirle, Yasmin T1 - Arbeit 4.0: Die Auswirkungen der Digitalisierung auf die Arbeitsplatzunsicherheit in Organisationen N2 - Die heutige Gesellschaft ist eine Erwerbsgesellschaft. Arbeit sichert die soziale und materielle Integration der Bürger (Korte und Weidenfeld 2001). Die Globalisierung und die Digitalisierung des westeuropäischen Arbeitsmarktes führt unter Beschäftigten zu Unsicherheitswahrnehmungen bezüglich des Fortbestandes des Arbeitsplatzes (Sverke et al. 2006). Der digitale Wandel revolutioniert Geschäftsmodelle und Branchen und führt zur Entstehung neuer Produktions- und Logistikketten sowie neuer Produkte und Dienstleistungen. Zudem findet der digitale Wandel weltweit statt, wodurch der globale Wettbewerb und die internationale Arbeitsteilung zunehmen. Im Zuge der Digitalisierung sind in den vergangenen Jahren insbesondere mittlere Tätigkeiten mit hohem Routine Grad zurückgegangen (BMAS 2015). Das zunehmende Substituierbarkeitspotential verschiedener Tätigkeiten führt zu einer signifikanten Verstärkung der Wahrnehmung von Arbeitsplatzunsicherheit unter den Erwerbstätigen. Arbeitsplatzunsicherheit birgt zahlreiche negative Auswirkungen. So hat z.B. eine sich schnell wandelnde, unsichere Arbeitsumgebung nicht nur Auswirkungen auf das Wohlergehen der Mitarbeiter*innen, sondern auf die gesamte Organisation (Ashford et al. 1989). Zu den Folgen von Arbeitsplatzunsicherheit gehören psychische und physische Belastungen und eine erhöhte Kündigungsabsicht der Beschäftigten. Zudem besteht ein signifikanter Zusammenhang zwischen Arbeitsplatzunsicherheit und Arbeitszufriedenheit. In Zeiten der fortschreitenden Digitalisierung stellt die Prävention von Arbeitsplatzunsicherheit und die Reduktion ihrer Folgen eine zentrale Managementaufgabe für Organisationen dar. Mittels einer systematischen Literaturrecherche werden in der vorliegenden Arbeit Indikatoren für die Entstehung der Arbeitsplatzunsicherheit identifiziert. Dazu gehört nicht nur der drohende Verlust des Arbeitsplatzes, sondern auch der drohende Verlust geschätzter Merkmale der ausgeübten Tätigkeit. Nach der Analyse der Ursachen und Auswirkungen von Arbeitsplatzunsicherheit werden Handlungsempfehlungen für Organisationen entwickelt, um der Entstehung von Arbeitsplatzunsicherheit vorzubeugen oder die Folgen von Arbeitsplatzunsicherheit weitestgehend zu reduzieren. Die Ergebnisse zeigen, dass besonders in Zeiten der zunehmenden Digitalisierung der Arbeitswelt Maßnahmen wie eine frühzeitige und offene Kommunikation über bevorstehende Veränderungsprozesse, soziale Unterstützung, Partizipation der Mitarbeiter*innen und Förderungsangebote für die Belegschaft von zentraler Bedeutung sind, um die Effektivität der Organisation aufrecht zu erhalten. KW - Digitalisierung KW - Arbeit 4.0 KW - Industrie 4.0 KW - Arbeitsplatzunsicherheit KW - Organisation Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6032 ER - TY - THES A1 - Lambach, Laura Maximiliane T1 - Gender pay gap and women's representation in managerial positions - The cases of Australian and German managers' remuneration and gender allocation N2 - Women in managerial positions are still underrepresented and receive lower remuneration than male managers. The thesis aims at identifying factors which have an impact on managers' unbalanced gender presence and pay. A comparative country case study examines the situation in Australia and Germany. Results show that women's high share in part-time employment, tradition, their choice of profession and behavior (influenced by stereotypes) have a significant impact on women's earnings and career advancement. Existing policies in both countries that demand equal treatment of genders in the work environment are criticized for lack of effectiveness. Although measures combating gender inequality have been improving female managers' situation, a balanced share of women and men in management and equal pay can only be achieved if the perception of societies with regard to gender roles and stereotypes conduct a structural change towards an egalitarian gender role concept. Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-5838 ER - TY - JOUR T1 - 22/2020 Zweite Änderungssatzung zur Ordnung zur Kompensation der Folgen der Coronavirus SARS-CoV-2-Epidemie für Studium und Lehre an der Hochschule Rhein-Waal vom 15.10.2020 T3 - Amtliche Bekanntmachungen der Hochschule Rhein-Waal - 2020-22 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6308 VL - 2020 IS - 22 ER - TY - JOUR T1 - 1/2020 Korrektur der Prüfungsordnung für den Bachelorstudiengang Agribusiness der Fakultät LifeSciences an der Hochschule Rhein-Waal vom 28.11.2018 T3 - Amtliche Bekanntmachungen der Hochschule Rhein-Waal - 2020-01 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6278 VL - 2020 IS - 01 ER - TY - JOUR T1 - 2/2020 Korrektur der Prüfungsordnung für den Bachelorstudiengang Bio Science and Health der Fakultät LifeSciences an der Hochschule Rhein-Waal vom 28.11.2018 T3 - Amtliche Bekanntmachungen der Hochschule Rhein-Waal - 2020-02 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6268 VL - 2020 IS - 02 ER - TY - JOUR T1 - 3/2020 Korrektur der Prüfungsordnung für den Bachelorstudiengang Bioengineering der Fakultät LifeSciences an der Hochschule Rhein-Waal vom 28.11.2018 T3 - Amtliche Bekanntmachungen der Hochschule Rhein-Waal - 2020-03 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6258 VL - 2020 IS - 03 ER - TY - JOUR T1 - 4/2020 Vierte Änderungssatzung zur Prüfungsordnung für den Bachelorstudiengang International Business Administration der Fakultät Kommunikation und Umwelt an der Hochschule Rhein-Waal T3 - Amtliche Bekanntmachungen der Hochschule Rhein-Waal - 2020-04 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6245 VL - 2020 IS - 04 ER - TY - JOUR T1 - 5/2020 Erste Änderungssatzung zur Sozialordnung der Studierendenschaft der Hochschule Rhein-Waal T3 - Amtliche Bekanntmachungen der Hochschule Rhein-Waal - 2020-05 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6237 VL - 2020 IS - 05 ER - TY - JOUR T1 - 6/2020 Prüfungsordnung für den Bachelorstudiengang Gender and Diversity der Fakultät Gesellschaft und Ökonomie an der Hochschule Rhein-Waal T3 - Amtliche Bekanntmachungen der Hochschule Rhein-Waal - 2020-06 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6226 VL - 2020 IS - 06 ER - TY - JOUR T1 - 7/2020 Erste Änderungssatzung zur Prüfungsordnung für den Bachelorstudiengang Verwaltungsinformatik – E-Government der Fakultät Kommunikation und Umwelt an der Hochschule Rhein-Waal T3 - Amtliche Bekanntmachungen der Hochschule Rhein-Waal - 2020-07 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6209 VL - 2020 IS - 07 ER - TY - JOUR T1 - 8/2020 Prüfungsordnung für den Bachelorstudiengang Kindheitspädagogik der Fakultät Gesellschaft und Ökonomie an der Hochschule Rhein-Waal T3 - Amtliche Bekanntmachungen der Hochschule Rhein-Waal - 2020-08 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6191 VL - 2020 IS - 08 ER - TY - JOUR T1 - 9/2020 Praktikumsordnung für den Bachelorstudiengang Kindheitspädagogik der Fakultät Gesellschaft und Ökonomie an der Hochschule Rhein-Waal T3 - Amtliche Bekanntmachungen der Hochschule Rhein-Waal - 2020-09 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6183 VL - 2020 IS - 09 ER - TY - JOUR T1 - 10/2020 Ordnung der Hochschule Rhein-Waal für die Durchführung der Zugangsprüfung und des Probestudiums für beruflich qualifizierte Bewerberinnen und Bewerber vom 11.10.2019 (Zugangsprüfungsordnung – BBHZVO T3 - Amtliche Bekanntmachungen der Hochschule Rhein-Waal - 2020-10 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6172 VL - 2020 IS - 10 ER - TY - JOUR T1 - 11/2020 Ordnung zur Kompensation der Folgen der Coronavirus SARS-CoV-2-Epidemie für Studium und Lehre an der Hochschule Rhein-Waal T3 - Amtliche Bekanntmachungen der Hochschule Rhein-Waal - 2020-11 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6161 VL - 2020 IS - 11 ER - TY - JOUR T1 - 12/2020 Prüfungsordnung für den Masterstudiengang International Management and Psychology an der Hochschule Rhein-Waal T3 - Amtliche Bekanntmachungen der Hochschule Rhein-Waal - 2020-12 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6150 VL - 2020 IS - 12 ER - TY - JOUR T1 - 13/2020 Erste Änderungssatzung zur Prüfungsordnung für den Bachelorstudiengang Biomaterials Science der Fakultät Technologie und Bionik an der Hochschule Rhein-Waal T3 - Amtliche Bekanntmachungen der Hochschule Rhein-Waal - 2020-13 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6146 VL - 2020 IS - 13 ER - TY - JOUR T1 - 14/2020 Erste Änderungssatzung zur Prüfungsordnung für den Bachelorstudiengang Electrical and Electronics Engineering der Fakultät Technologie und Bionik an der Hochschule Rhein-Waal T3 - Amtliche Bekanntmachungen der Hochschule Rhein-Waal - 2020-14 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6135 VL - 2020 IS - 14 ER - TY - JOUR T1 - 15/2020 Erste Änderungssatzung zur Prüfungsordnung für den Bachelorstudiengang Industrial Engineering der Fakultät Technologie und Bionik an der Hochschule Rhein-Waal T3 - Amtliche Bekanntmachungen der Hochschule Rhein-Waal - 2020-15 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6120 VL - 2020 IS - 15 ER - TY - JOUR T1 - 16/2020 Ordnung über die Auslaufplanung der Bachelorstudiengänge „Science Communication & Bionics B.A” und „Science Communication & Bionics B.Sc.”der Fakultät Technologie und Bionik an der Hochschule Rhein-Waal T3 - Amtliche Bekanntmachungen der Hochschule Rhein-Waal - 2020-16 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6087 VL - 2020 IS - 16 ER - TY - JOUR T1 - 17/2020 Erste Änderungssatzung zur Prüfungsordnung für den Bachelorstudiengang Mechanical Engineering der Fakultät Technologie und Bionik an der Hochschule Rhein-Waal T3 - Amtliche Bekanntmachungen der Hochschule Rhein-Waal - 2020-17 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6076 VL - 2020 IS - 17 ER - TY - JOUR T1 - 18/2020 Erste Änderungssatzung zur Prüfungsordnung für den Bachelorstudiengang Mechatronic Systems Engineering der Fakultät Technologie und Bionik an der Hochschule Rhein-Waal T3 - Amtliche Bekanntmachungen der Hochschule Rhein-Waal - 2020-18 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6064 VL - 2020 IS - 18 ER - TY - JOUR T1 - 19/2020 Erste Änderungssatzung zur Ordnung zur Kompensation der Folgen der Coronavirus SARS-CoV-2-Epidemie für Studium und Lehre an der Hochschule Rhein-Waal T3 - Amtliche Bekanntmachungen der Hochschule Rhein-Waal - 2020-19 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-6051 VL - 2020 IS - 19 ER - TY - JOUR T1 - 20/2020 Zweite Änderungssatzung zur Grundordnung der Hochschule Rhein-Waal T3 - Amtliche Bekanntmachungen der Hochschule Rhein-Waal - 2020-20 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-5985 VL - 2020 IS - 20 ER - TY - JOUR T1 - 21/2020 Korrektur der ersten Änderungssatzung zur Prüfungsordnung für den Bachelorstudiengang Mechanical Engineering der Fakultät Technologie und Bionik an der Hochschule Rhein-Waal T3 - Amtliche Bekanntmachungen der Hochschule Rhein-Waal - 2020-21 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-5886 VL - 2020 IS - 21 ER - TY - RPRT A1 - Hansohm, Nele A1 - Jansen, Lennart A1 - Mandala, Kennedy A1 - Kandiado, Peter A1 - Meinhold, Kathrin A1 - Darr, Dietrich A1 - Wichern, Florian A1 - Gebauer, Jens T1 - Instruction Manual of Baobab Cultivation – Based on Experiences in Mangochi, Malawi N2 - Based on experiences in Mangochi, Malawi an instruction manual on how to best cultivate baobab seedlings has been developed. The manual covers all steps from seed and field preparation, how to manage the seedlings e.g. with regard to irrigation and pests, up to harvest of leaves and root tubers – which can be used as a food source. KW - Baobab KW - Horticulture KW - Malawi KW - Plant genetic resources KW - Vegetable Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-5859 ER - TY - RPRT A1 - Schlüter, Esther T1 - What is the legal role of the European Central Bank (ECB) in monetary policy? T2 - Arbeitspapier N2 - In this working paper, which was created at the Faculty of Communication and Environment of the Rhine-Waal University of Applied Sciences, the legal role of the European Central Bank (ECB) in monetary policy is discussed, and exact sources are given. KW - ECB KW - European Central Bank KW - Monetary policy Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-5645 ER - TY - RPRT A1 - Schlüter, Esther T1 - The seven "quality tools" and their usage T2 - Arbeitspapier N2 - In this working paper, which was created at the Faculty of Communication and Environment of the Rhine-Waal University of Applied Sciences, the seven quality tools and their use are discussed, and exact sources are given. KW - Quality tools Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-5625 ER - TY - THES A1 - Muzipova, Zarina T1 - Forewarned is forearmed: Einfluss der Copingstrategien auf das Niveau der Gesundheitskompetenz N2 - Gesundheitskompetenz wird als ein kompetenter Umgang mit gesundheitsrelevanten Informationen definiert, welcher gewisse Fähigkeiten, Motivation und Wissen umfasst, um im alltäglichen Leben gesundheitsförderliche Entscheidungen treffen zu können. Studien (Schaeffer, Vogt, Berens, & Hurrelmann, 2016; Sørensen, et al., 2012) konzentrieren sich auf Einflüsse verschiedener sozial-demografischer Determinanten zur Förderung der Gesundheitskompetenz. Diese Arbeit untersucht den Einfluss der persönlichen Determinanten, wie Coping, auf die esundheitskompetenz. Es nahmen 131 deutschsprachige Studierende an der Online-Befragung teil. Neben der subjektiven Einschätzung der eigenen Gesundheitskompetenz sowie dem Niveau des proaktiven und präventiven Copings wurden ebenfalls sozio-demografische Merkmale erhoben. Die Ergebnisse zeigen, dass sich zwischen der Gesundheitskompetenz und präventivem Coping (r(129) = .321***, p < .001) eine höhere Korrelation als zwischen der Gesundheitskompetenz und dem proaktiven Coping (r(129) = .271**, p = .002) ergibt. Darüber hinaus wurde festgestellt, dass der überwiegende Anteil der Befragten (n = 92; 70,2%) über eine limitierte Gesundheitskompetenz verfügt. Schwierigkeiten bereiten den Versuchspersonen Informationen aus dem Bereich Gesundheitsförderung zu verarbeiten und bei den Bearbeitungsschritten wie das Finden der gesundheitsbezogenen Informationen sowie das Beurteilen der gewonnen Informationen. KW - Gesundheitskompetenz KW - Proaktives Coping KW - Präventive Bewältigung KW - HLSEU-Q47 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-5529 ER - TY - THES A1 - Kurtz, Lara T1 - Erinnerung an Zukünftiges: Kann Achtsamkeitspraxis das prospektive Gedächtnis verbessern? Ein experimenteller Gruppenvergleich N2 - Die vorliegende Arbeit untersuchte durch einen experimentellen Gruppenvergleich die Auswirkung einer 10-minütigen Achtsamkeitspraxis auf die prospektive Gedächtnisleistung. Hierbei wurde sowohl eine fokale als auch eine nonfokale PM-Aufgabe getestet, da für letztere die Notwendigkeit eines stärkeren Einsatzes strategischer Überwachungs- und Kontrollprozesse angenommen wird. Basierend auf Befunden, dass diese exekutiven Funktionen durch eine Achtsamkeitspraxis unterstützt werden können, wurde die Annahme überprüft, dass Meditierende im Vergleich zur Kontrollgruppe eine verbesserte Leistung in der nonfokalen Bedingung zeigen. In beiden Gruppen wurden jeweils 12 Studierende in 45-minütigen Einzelsitzungen getestet. Die statistische Analyse der Reaktionszeiten und Genauigkeiten dieses Between-Within Designs zeigte keine signifikanten Effekte der Gruppenzugehörigkeit und/oder Aufgaben-Bedingung. Auch die erfasste Achtsamkeitsausprägung über die gesamte Stichprobe hinweg, welche mit dem Freiburger Fragebogen zur Achtsamkeit erhoben wurde, zeigte keinen signifikanten Zusammenhang zu der prospektiven Gedächtnisleistung oder den Reaktionszeiten. In der Diskussion werden mögliche Gründe für diese Befunde aufgezeigt sowie vor allem die Limitationen des Versuchsaufbaus kritisch betrachtet. Hervorgehoben werden die hypothesenunterstützenden Tendenzen der Daten, welche auf die Notwendigkeit weiterer Erforschung des erstmals untersuchten Zusammenhangs zwischen Achtsamkeit und prospektiven Gedächtnis hinweisen. Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-4478 ER - TY - RPRT A1 - Horsch, Robin T1 - Staatsmerkmale N2 - In diesem Arbeitspapier, das an der Fakultät für Kommunikation und Umwelt der Hochschule Rhein-Waal entstanden ist, werden die juristischen Grundlagen und aktuelle Fälle der Rechtsprechung, zum Thema Staatsmerkmale, erörtert und mit genauen Quellenangaben versehen. T3 - Studentische Arbeitspapiere im Bereich Recht - 17 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-5439 ER - TY - RPRT A1 - Thomas, Tobias T1 - Versammlungsfreiheit in der Verfassung N2 - Die Versammlungsfreiheit und ihre Rechte. Folgend auch die Auswirkungen der Versammlungsfreiheit während der Covid-19 Pandemie. T3 - Studentische Arbeitspapiere im Bereich Recht - 16 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-5423 ER - TY - RPRT A1 - Hoefs, Phillip T1 - Verwaltungsrecht N2 - In diesem Arbeitspapier, das an der Fakultät für Kommunikation und Umwelt der Hochschule Rhein-Waal entstanden ist, werden die juristischen Grundlagen und aktuelle Fälle der Rechtsprechung erörtert und mit genauen Quellenangaben versehen. T3 - Studentische Arbeitspapiere im Bereich Recht - 14 KW - Verwaltungshandeln KW - Realhandeln KW - Verwaltungsinterne Maßnahmen KW - Verwaltungsakte KW - Verwaltungsvorschriften Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-5419 ER - TY - THES A1 - Koch, Alexander David T1 - Collective Action Opportunities for Upgrading the Value Chain of Small-scale Wooden Furniture Enterprise in Hawassa, Ethiopia N2 - Ethiopia is challenged with a widening domestic wood supply gap and concurrent rapid population growth. Along with these developments, the population’s growing purchasing power is driving the demand for wooden furniture. The majority of this demand is satisfied by small-scale enterprises. Adding to the domestic wood supply uncertainty, such enterprises are exposed to various challenges, such as infrastructural limitations, unfavourable market conditions, weak government support, or skill gaps, thereby hindering their development and often situating them in a subsistent and poor survival state. A development opportunity comes to light when considering that small-scale wooden furniture enterprises are linked to a critical natural resource base, exposed to growing markets, and mostly consist of individuals with an entrepreneurial vision. If guided effectively, this sector has the potential to drive an economic environment of innovative entrepreneurship, create skilful employment, and disseminate propulsive market signals towards wood suppliers. Collective action is a frequently discussed upgrading option for countering development barriers in the context of emerging economies and therefore, is explored as a potential upgrading mechanism. This study aims to develop a potential institutional model of collective action among small-scale enterprises in Hawassa, Ethiopia. The study follows the general procedure of a value chain analysis and frames the collective action model as a potential value chain upgrading strategy. As the target actor is poorly studied, an explorative and descriptive research approach is applied. In-depth interviews were conducted with 54 wooden furniture enterprises to gain insight into their value chain position and condition, cost structures, network ties, as well as challenges. Then, individual enterprises were asked to envision a desired collective action upgrading scenario. Several key informant interviews were also conducted with direct (internal) and indirect (external) value chain actors to forge a holistic value chain structure as well as to triangulate data. The situation for small-scale furniture enterprises was found to be highly unfavourable. The most substantial issue is the limited access to adequate factors of production, especially regarding the production site, physical capital and financial capital. With markets failing to provide these, enterprises were often observed to engage in social network ties with other furniture enterprise to enable access to resources. In addition, the government’s role in supporting these enterprises was found to be weak and poorly organized. Access to support services was observed to be obstructed by ethno-centrism as well as a high labour turnover amongst development agents. Promised trainings and access to factors of production were either rarely fulfilled or qualitatively low. To counter these issues, an institutional collective action in the form of a business association is recommended. On the basis of a literature review, empirical evidence on the status quo of the target enterprises, as well as their perception on upgrading scenarios, the study develops a model association, describing its form, purpose, institutional arrangements as well as the characteristics of participating actors and potential members. It is purposed to facilitate stable network ties and act as a collective voice for improving the condition of small-scale furniture producers. It especially serves to lower transaction costs with authoritative entities, supports the access to improved business development services, such as microfinances or trainings, and advocates for improved market conditions. In the long run, the association will help small-scale enterprises collectively develop into innovative and resource efficient businesses, thereby driving and improving local forest-based markets. Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-5346 ER - TY - THES A1 - Hock, Maximilian T1 - Vorbeugung, Reduzierung und Bewältigung psychischer Fehlbelastungen zur Prävention von Folgeerkrankungen am Arbeitsplatz N2 - Scientific findings indicate that mental stress in the working environment has risen sharply in recent years and will continue to develop. An imbalance between coping opportunities and mental stress can lead to health problems, up to including mental illnesses such as depression and anxiety disorders. Therefore, it is essential for companies to recognise psychological stress and secondary diseases as well as the integrate of interventions into work structures with the help of corporate health management. The present study aims to take a detailed look at mental stress at the workplace and to identify existing interventions for the prevention of mental stress. The effectiveness of the interventions in terms of psychological stress and secondary diseases, depression and anxiety disorder, will also be presented. Recommendations for measures are then to be made available to companies to prevent mental stress and secondary diseases. With the help of scientific literature, the basics of psychological stress at the workplace have been presented. Through a systematic literature search, existing interventions could be identified, which can have a preventive effect on psychological stress and secondary diseases, depression and anxiety disorders. A systematic meta-review served as a basis and was supplemented by further reviews. Results can provide recommendations for measures in corporate health management to help employers to prevent mental stress and secondary diseases. The results of this work showed that there are various intervention approaches that can achieve positive effects in the prevention of psychological stress and secondary diseases, depression and anxiety disorders. Intervention options such as physical activity, mindfulness-based interventions and cognitive behavioural therapy have shown a high evidence of effectiveness. Recommendations for measures can be implemented in companies with the help of the action concept within a psychological risk assessment. N2 - Wissenschaftliche Erkenntnisse deuten darauf hin, dass psychische Belastungen der Arbeitswelt in den letzten Jahren stark angestiegen sind und sich weiter ausprägen werden. Ein Ungleichgewicht zwischen Bewältigungsmöglichkeiten und psychischen Belastungen kann zu gesundheitlichen Problemen, bis hin zu psychischen Erkrankungen wie Depression und Angststörung führen. Deshalb ist es für Unternehmen essenziell, psychische Fehlbelastungen und Folgeerkrankungen zu erkennen und Interventionen mit Hilfe des betrieblichen Gesundheitsmanagements (BGM) in Arbeitsstrukturen einzubinden. Die vorliegende Arbeit setzt sich zum Ziel, psychische Belastungen am Arbeitsplatz detailliert zu betrachten sowie bestehende Interventionen zur Prävention von psychischen Fehlbelastungen zu ermitteln. Auch soll die Wirksamkeit der Interventionen hinsichtlich psychischer Fehlbelastungen und Folgeerkrankungen, Depression und Angststörung, dargelegt werden. Maßnahmenempfehlungen sollen anschließend zur Prävention psychischer Fehlbelastungen und Folgeerkrankungen für Unternehmen bereitgestellt werden. Mit Hilfe wissenschaftlicher Fachliteratur wurden Grundlagen psychischer Belastungen am Arbeitsplatz dargelegt. Durch eine systematische Literaturrecherche konnten bestehende Interventionen ermittelt werden, welche präventiv auf psychische Fehlbelastungen und Folgeerkrankungen, Depression und Angststörung, wirken können. Ein systematisches Meta-Review diente hierbei als Grundlage und wurde durch weitere Reviews ergänzt. Ergebnisse können Maßnahmenempfehlungen für das BGM darbieten, um Arbeitgebern eine Hilfestellung zur Prävention von psychischen Fehlbelastungen und Folgeerkrankungen zu ermöglichen. Ergebnisse dieser Arbeit zeigten, dass vielfältige Interventionsansätze bestehen, welche positive Effekte zur Prävention von psychischen Fehlbelastungen und Folgeerkrankungen, Depression und Angststörung, erzielen können. Interventionsmöglichkeiten wie beispielsweise körperliche Aktivität, achtsamkeitsbasierte Interventionen und kognitive Verhaltenstherapie konnten eine hohe Evidenz der Wirksamkeit verzeichnen. Maßnahmenempfehlungen können mit Hilfe des Handlungskonzepts im Rahmen einer psychischen Gefährdungsbeurteilung in Unternehmen umgesetzt werden. KW - Health KW - Prevention KW - Workplace KW - BGM KW - Psychische Fehlbelastungen KW - Arbeitsplatz KW - Prävention KW - Depression Y1 - 2020 ER - TY - RPRT A1 - Topp, Patrick T1 - Wehrdienst und Ersatzdienst im Grundgesetz N2 - Dieses Arbeitspapier befasst sich mit dem Wehr- und Ersatzdienst im Grundgesetz. T3 - Studentische Arbeitspapiere im Bereich Recht - 15 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-5391 ER - TY - RPRT A1 - Gooren, Lutz T1 - Verwaltungsrecht N2 - In diesem Arbeitspapier, das an der Fakultät für Kommunikation und Umwelt der Hochschule Rhein-Waal entstanden ist, werden die juristischen Grundlagen und aktuelle Fälle der Rechtsprechung erörtert und mit genauen Quellenangaben versehen. T3 - Studentische Arbeitspapiere im Bereich Recht - 12 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-5388 ER - TY - THES A1 - Wissigkeit, Tobias T1 - Motivating children to eat vegetables by enhancing meals with digital media N2 - Digital media is finding its way into all parts of life, even eating. The gamification of food is experimented with, mainly for recreational purposes. But it could also be used to achieve a different goal. In this work, an approach to motivating children to eat and like vegetables more is explored. First, the basic perception of vegetables by children is examined and various ideas for games are explored with Cooperative Inquiry. These can be grouped into three categories: building, challenge and randomness. Possible prototypes have been discussed in form of text. A building game has been tested and it had a positive effect on the perception of vegetables of the participating children. However, only few children were available to work with, making further studies necessary. KW - Cooperative inquiry KW - Gastroludology KW - Vegetables KW - Human-Food interaction KW - Gamification Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-4708 ER - TY - THES A1 - Rau, Katja T1 - Impact Investments - A Performance Analysis of Impact Funds N2 - Impact investing emerged as an investment option that can bridge the gap between funding from governments and philanthropist to combat social and environmental challenges (Bugg-Levine & Goldstein, 2009, p.41). However, many skeptical voices arise regarding impact investing, because some issues hinder the growth the impact investing market (Gray et al., 2015, p.3). Regulatory intervention is needed to overcome the persisting challenges (Martin, 2013, p.18). Therefore, a literature review was undertaken in order to give an overview of existing regulatory measures and initiatives that have been implemented in different regions to foster the growth of the impact investing market, especially in the light of the taxonomy that was recently proposed by the EU. The literature review revealed that many regulations and initiatives have been established across the world, however the regulatory environment regarding impact investing is currently fragmented. Therefore, it is important that governments collaborate to uniformize regulations on a global level. Furthermore, this paper aims to find out how impact funds perform financially in comparison to conventional funds. In order to answer that question a performance analysis, using the Sharpe Ratio as a performance indicator, was conducted. The performance analysis indicated that impact funds perform slightly better than conventional funds. The result goes in line with existing studies that have analyzed the performance of impact investments. This paper indicates that impact investments can compete with conventional investments, but that there is still a lot to be done to bring the market to scale. KW - Impact investing KW - Financial performance Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-5326 ER - TY - THES A1 - van Staa, Philip T1 - Welchen Einfluss haben Foodsharing-Apps auf das Ausmaß der Lebensmittelverschwendung? N2 - Entlang der gesamten Lebensmittelwertschöpfungskette fallen Nahrungsmittelabfälle an. Die Vereinten Nationen haben mit der Agenda 2030 zu verschiedenen Nachhaltigkeitszielen aufgerufen, unter anderem die globale Lebensmittelverschwendung bis 2030 zu halbieren. Deutschland hat sich diesem Ziel mit einer nationalen Strategie zur Reduzierung der Lebensmittelabfälle angenommen. (Deutscher Bundestag 2019) Das Ziel der vorliegenden Arbeit ist es, zu untersuchen, ob Foodsharing-Apps einen signifikanten Anteil leisten, um die nationalen Lebensmittelabfälle zu verringern. Dazu wird die folgende Forschungsfrage gestellt: Welchen Einfluss haben Foodsharing-Apps auf das Ausmaß der Lebensmittelverschwendung? Um die Forschungsfrage zu beantworten, sind drei qualitative Interviews mit Experten verschiedener Unternehmen durchgeführt worden, die eine langwierige Zusammenarbeit mit der Foodsharing-App „Too Good To Go“ nachweisen können. Die Ergebnisse geben Aufschluss darüber, welchen individuellen Stellenwert die Lebensmittelvergeudung sowohl für den Endverbraucher, als auch für die teilnehmenden Betriebe hat und welchen Einfluss Foodsharing-Apps dabei einnehmen. Y1 - 2020 ER - TY - THES A1 - Schreder, Lisa Johanna T1 - Ableitung eines Handlungsleitfadens für die betriebliche Gesundheitsförderung eines Unternehmens mit Hilfe einer strategischen Analyse N2 - Digitalisierung, Globalisierung und Arbeit 4.0 prägen das heutige Arbeitsleben und sind aus diesem nicht mehr wegzudenken. Diese Neuerungen stellen sowohl die Beschäftigten als auch die Arbeitgeber vor Herausforderungen. Die Mitarbeiterinnen und Mitarbeiter werden durch diese Entwicklungen in vielen Fällen immer stärker beansprucht. Beanspruchungsfolgen der neuen Belastungen zeigen sich beispielsweise durch den Anstieg psychischer Erkrankungen, denn die Fehltage im Zusammenhang mit psychischen Erkrankungen haben sich seit 1997 verdreifacht. Um trotz allem die Beschäftigten gesund und motiviert durch das Berufsleben zu führen und die Gesundheitspotenziale der Mitarbeiterinnen und Mitarbeiter zu stärken, werden in immer mehr Betrieben unter anderem Angebote der betrieblichen Gesundheitsförderung durchgeführt. Denn auch die Unternehmen haben ein großes Interesse daran, dass ihre Beschäftigten das gesamte Arbeitsleben gesund und leistungsfähig bleiben. Doch damit die Mitarbeiterinnen und Mitarbeiter von dieser betrieblichen Gesundheitsförderung nicht nur kurzfristig profitieren, muss diese auf die neuen Herausforderungen eingestellt und daraufhin ausgerichtet werden. An diesem Punkt setzt die vorliegende Masterarbeit an. Ziel dieser Arbeit ist es, die betriebliche Gesundheitsförderung eines Unternehmens für die zukünftigen Herausforderungen aufzustellen und Handlungsfelder für die weitere Ausplanung zu identifizieren. Hierfür rückt zunächst die zentrale Fragestellung in den Fokus, welche Herausforderungen für die betriebliche Gesundheitsförderung zu bewältigen sind. Dies geschieht anhand einer externen Analyse. Diese Analyse ermittelt Einflüsse, die von außen auf die betriebliche Gesundheitsförderung einwirken und somit die Chancen und Risiken für das Unternehmen darstellen. Welche Stärken und Schwächen die betriebliche Gesundheitsförderung des Unternehmens besitzt, beantwortet die interne Analyse. Ob sich aus den neuen Herausforderungen ein individueller Handlungsbedarf für die betriebliche Gesundheitsförderung des Unternehmens ergibt, lässt sich aus der abschließenden SWOT-Analyse und Diskussion der Ergebnisse erkennen. Dafür werden Stärken, Schwächen, Chancen und Risiken gegeneinander in einer Matrix aufgetragen. Wie die betriebliche Gesundheitsförderung des Unternehmens aussehen muss, um den zukünftigen Herausforderungen gewachsen zu sein, bildet sich in dem Handlungsleitfaden für die betriebliche Gesundheitsförderung des Unternehmens ab. Der Leitfaden stellt demnach eine Aufstellung der Strategie der betrieblichen Gesundheitsförderung im Unternehmen dar, in Abhängigkeit der kommenden Herausforderungen. Y1 - 2020 ER - TY - THES A1 - Li, Shiwei T1 - Influence of long-term organic and conventional farming on soil microbial properties N2 - In order to find out how different farming system influence microbial biomass and therefore influence the long-term soil fertility and soil quality, this study analyzed the impacts of conventional integrated and organic farming systems on soil microbiological parameters using soil samples from the DOK long-term field experiment (Switzerland). Farmyard manure fertilizer is applied to bio-dynamic (D), bio-organic (O) and conventional farming system (K) with two different intensities. Besides, there are a conventional mineral fertilizer received system (M) and an unfertilized control plot (U). The chloroform fumigation extraction (CFE) method and quantitative polymerase chain reaction (qPCR) test were applied for detection and quantification of soil microbial biomass along with some other tests in physical, chemical and biological aspects. Soil pH tends to increase by applying farmyard manure. Metabolic quotient (qCO 2 ) revealed a lower level in the manured system though there was no significant difference between conventional and organic system. On one hand, D treatment achieved the highest values regarding microbial biomass carbon, nitrogen and phosphorus, and the highest gene copies number of detected microbial domains. On the other hand, higher concentration of microbial biomass sodium, potassium, manganese, silicon, nickel and zinc were found in M and K system. Contrary to expectation, the soil organic matter content between different treatments had only a little difference. In general, each tested soil quality parameter was affected by the type and quantity of fertilizer used to a different extent, among which the soil microbiological parameters showed more pronounced difference compared with soil physical parameter, pH and soil organic matter content. In short, organic farming system had greater potential to maintain soil fertility and improve soil quality than conventional farming system in the long term; while the comparison between two organic systems emphasized the beneficial influence from applying compost manure and bio-dynamic additives. Y1 - 2020 ER - TY - THES A1 - Ranganathan, Shraddha T1 - Evaluation of two methods to reduce legume-related flatulence through enzymatic digestion of flatulence factors N2 - Legumes are nutritionally equivalent to many meat products, and can be used to supplement or replace meat in daily diets. This is beneficial for a variety of reasons, such as: i) growing legumes can help to reduce acidification of soil, global warming potential and energy use; ii) livestock is taxing on the environment in terms of adding to the volume of greenhouse gases and nitrification of soil while legume crops fix soil nitrogen. Consumers can be opposed to adding legumes to their diet due to the perception of legumes causing flatulence. Intestinal gas buildup, bloating, cramps, abdominal pain and flatulence are caused by raffinose family oligosaccharides (RFOs) which cannot be digested in monogastric organisms such as humans. They are therefore broken down by microflora in the intestine; this bacterial digestion releases large volumes of hydrogen, which causes flatulence. The human body lacks the enzyme required to break down these RFOs — ⍺-galactosidase. This experiment evaluated two methods of applying ⍺-galactosidase to RFOs before they reach the intestinal microflora. The first method evaluates the effectiveness of enzymatically digesting the legumes before consumption. The second evaluates the effectiveness of the enzyme supplement Beano, which applies the enzyme to RFOs in the stomach. Experimental data showed that enzymatically digesting raw flours does significantly reduce the amount of RFOs in the legume. Similarly, Beano also reduces RFOs significantly. In 4 out of the 6 legumes sampled, there was no significant difference between the two methods. In order to consider the methods for commercial use, other factors (such as economic, logistical, etc.) must also be considered. At the outset, it appears that taking an enzyme supplement such as Beano might be more economically viable in the long term for the consumer, since processing costs for the flatulence free legumes would drive up the price of (normally cheap) legumes. There is an increase in the amount of people who are giving up meat for environmental and other reasons. For these consumers, as well as those who come from cultures that integrate legumes in their cuisine, the removal of flatulence factors from this nutrition-rich food group will be very beneficial. KW - Alpha-galactosidase KW - Bloating KW - Enzymatic assay Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-4903 ER - TY - THES A1 - Khedher, Lara T1 - Evolution of CRISPR-Cas genome editing methods: Chances and challenges in biotechnology N2 - Clustered regularly interspaced short palindromic repeats, CRISPR, are located on DNA sequences, which encode for an antiviral defense mechanism in bacteria and archaea. Together with CRISPR-associated proteins, Cas endonucleases, CRISPR-Cas has emerged into a powerful platform for editing DNA and RNA. This thesis investigates the evolution and function of this prokaryotic defense mechanism and points out the three most applied CRISPR-Cas systems in relation to current applications in biotechnology. Furthermore, chances and challenges of named systems as well as a guideline for choosing the appropriate system with Cas endonucleases is framed. Therefore, several scientific databases were screened for the most informative and influential publications around the topic. Information was collected and organized in a reference management software. The utilized literature was tabularly denoted and gives an overview of the broad scope of CRISPR-Cas. The analysis of the topic shows, that CRISPR-Cas offers a broad application range with a huge chance for genome editing. A conclusion of this thesis is, that CRISPR-Cas has an enormous potential to be implemented for human genome editing. However, its challenges should be cleared beforehand. Further research has to be done to fully understand the impact CRISPR-Cas may have in future. KW - Genome editing KW - Genetics KW - CRISPR KW - Cas Y1 - 2020 ER - TY - THES A1 - Heinen, Darlene T1 - About the change in the level of satisfaction and frustration of basic psychological needs in depressed patients after sports therapy and how autonomy support contributes to this change N2 - Depression is one of the most prevalent mental disorders. Studies reported that exercises can be as effective as pharmacotherapy or psychotherapy in the treatment of depression. However less is known about the mechanism exercise effects psychological well-being. The Basic Need Theory, a mini theory within Self-Determination Theory proposes the implication of the perceived social environment on the satisfaction of basic psychological needs, namely autonomy, competence and relatedness. The satisfaction of basic needs is essential for human well-being whereas the frustration leads to ill-being. An autonomy supportive social environment is of use in the fulfillment of basic needs. The following study examined a sample of 90 participants allocated into groups of low and high exercise intensity completing an exercise therapy of 12 weeks. The perceived satisfaction and frustration of basic psychological needs and the effect of autonomy support on the change of basic psychological needs after exercise therapy in different intensities were evaluated pre and post intervention. Results have shown an effect of exercise therapy on the change of depressive symptoms. A difference of efficacy of exercises in low or high intensity could not be verified. A path analysis has shown an effect of autonomy support on the change in depressive symptoms that is partially mediated by the frustration of the need for competence. Taking together the results maintained that exercise therapy redounds in a positive change of depressive symptoms. There is evidence for the satisfaction and frustration of basic psychological needs contributed to this change. Autonomy support needs more empirical testing to be better substantiated with regard to the basic needs. Future studies might examine how the basic psychological needs relate to other facets of ill-being (e.g., anxiety). Keywords: depression, exercise and depression, Self-Determination Theory, basic psychological needs, Basic Psychological Need Satisfaction and Frustration Scale, autonomy support KW - Depression KW - Exercise Y1 - 2020 ER - TY - THES A1 - Schiffers, Lukas T1 - Optimization of RT-PCR Assays for the Roche cobas® 6800/8800 Utility Channel: Influence of 2´-O-Methyl modified Primers on PCR efficiency N2 - Automated, high-throughput real-time PCR instruments such as the cobas® 6800/8800 from Roche have revolutionized the operation in molecular diagnostics laboratories as they provide a complete process of patient samples including all necessary steps for PCR applications from material preparation up to the calculation and evaluation of final results with a minimum of user interaction. In addition to the broad spectrum of commercially available ready-to-use reagent kits for blood screenings, virologic and microbiological assays as well as tests designed for women’s health, the cobas® 6800/8800 provides a tool which allows users to develop and implement their own tests onto the high-throughput device. Equipped with this tool, called the cobas® omni Utility Channel, these automated instruments serve a high flexibility and can be adjusted to users’ personal needs. Notwithstanding the advantages of the Utility Channel, a limited number of lab developed tests have been implemented onto the cobas® 6800/8800 so far as no guideline for the optimization and transfer of such tests onto the Utility Channel has been provided to the public yet. In the course of this bachelor thesis, four real-time PCR assays, including an allele-specific duplex test for HLA-B27, an established in-house test for the differentiation and detection of Ureaplasma urealyticum/parvum, a published assay for the detection of Chlamydia trachomatis as well as a duplex reverse-transcription assay for the detection and differentiation of norovirus genogroup one and two have been optimized for the use on Utility Channel. Furthermore, 2´-O-Methyl modified primers have been integrated into the optimization process of all assays to asses their influence on PCR efficiency. Three of these four assays have been transferred successfully onto a cobas® 6800 following a developed method which lead to the final design of a flowchart guideline for the optimization of lab developed tests for the use on a cobas® 6800/8800 system. KW - PCR efficiency KW - Modified primers KW - Methylated primers KW - Cobas KW - Molecular biology Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-4632 ER - TY - THES A1 - Wellens, Sonja T1 - Vereinbarkeit von Familie und Beruf – Erhebung und Bewertung der Erwartungen zukünftiger Arbeitnehmer und Arbeitnehmerinnen unter konkreter Betrachtung der Generationen Y und Z N2 - Diese Masterarbeit befasst sich mit dem Thema Vereinbarkeit von Familie und Beruf und untersucht die Erwartungen zukünftiger Arbeitnehmer und Arbeitnehmerinnen. Mit Hilfe einer Umfrage werden Studierende bzgl. ihrer Erwartungen an den Arbeitgeber und ihrer individuellen Einstellung zu diesem Thema befragt. Die Untersuchung betrachtet konkret die Generationen Y und Z. Wird die Altersverteilung der Personen betrachtet, die sich derzeit im Studium befinden (Middendorff et al., 2017, S. 162) zeigt sich, dass Studierende größtenteils aus eben diesen beiden genannten Generationen stammen und damit entweder zwischen 1981 und 1995 oder nach 1995 geboren sind (Klaffke, 2014, S. 59ff). Außerdem sollen weitere Faktoren wie z.B. die jeweiligen Fachbereiche, in denen die Studierenden eingeschrieben sind, sowie das Geschlecht und das Vorhandensein eigener Kinder berücksichtigt werden, um auch hier auftretende Unterschiede in den Erwartungen ermitteln zu können. Anhand der Ergebnisse sollen in Kombination mit einer zuvor durchgeführten Literaturrecherche Handlungsempfehlungen für Arbeitgeber bzgl. zu treffenden Maßnahmen für die Vereinbarkeit von Familie und Beruf entwickelt werden. Neben der Online-Umfrage besteht die Basis der Masterarbeit aus einem auf eine umfangreiche Literaturrecherche beruhenden Theorieteil, welcher u.a. in Deutschland durchgeführte Studien und Unternehmensberichte aufgreift und so die theoretischen Grundlagen für das Thema Vereinbarkeit von Familie und Beruf und den aktuellen Stand dieser Thematik darlegt. Durch die Ergebnisse dieser Arbeit soll ein interdisziplinärer Erkenntnisgewinn erzielt werden. Y1 - 2020 ER - TY - THES A1 - Silva Cabral, Catarina T1 - Evaluierung der Auswirkungen von Telearbeit und Homeoffice auf die Gesundheit der Beschäftigten mittels einer empirischen Untersuchung an der Hochschule Rhein-Waal N2 - Die Anforderungen an die Arbeitswelt sind im ständigen Wandel. Dabei spielt auch die Arbeitsgestaltung in der heutigen Zeit eine große Rolle. Es besteht der Wunsch nach einer flexiblen Arbeitsgestaltung und der Möglichkeit Familie und Beruf zu vereinbaren. Zudem bringen die zunehmende Digitalisierung, die fortschreitende Nutzung sowie Weiterentwicklung von Informations- und Kommunikationstechniken neue Arbeitsformen mit sich. Eine Arbeitsform, die sich unter anderem als Ziel setzt, familienfreundliche Arbeitsbedingungen zu schaffen, ist die Telearbeit. Unter dem Begriff Telearbeit werden Arbeitsformen zusammengefasst, bei denen Angestellte ihre Arbeit ganz oder teilweise außerhalb der Gebäude des Arbeitsgebers verrichten. Dadurch sollen eine flexible Arbeitsgestaltung und eine Vereinbarkeit von Familie und Beruf ermöglicht werden. Jedoch können sich diese Arbeitsformen auch auf die Gesundheit der Beschäftigten auswirken. Aufgezeigt werden die Auswirkungen alternierender Telearbeit und Homeoffice, insbesondere im Hinblick auf die Gesundheit der Beschäftigten. In der vorliegenden Arbeit soll untersucht werden, inwiefern sich die Telearbeit bzw. Homeoffice auf den Gesundheitszustand und das Wohlbefinden der Beschäftigten auswirkt und inwiefern die alternierende Telearbeit eine psychische Belastung für die Mitarbeitenden darstellt. Darüber hinaus stellt sich die Frage, ob die Abwesenheit von Telearbeitenden zu einer psychischen oder körperlichen Belastung der Nicht-Telearbeitenden führt. Um die Forschungsfragen zu beantworten, wurde eine Online-Befragung durchgeführt, die sich an die Beschäftigten der Technik und Verwaltung, sowie die wissenschaftlichen Mitarbeitenden der Hochschule Rhein-Waal richtet. Durch die Ergebnisse der Umfrage lassen sich Erkenntnisse schließen, um die Forschungsfragen zu beantworten. Die aus der Erhebung gewonnenen Erkenntnisse bestätigen eine verbesserte Vereinbarkeit von Beruf und Privatleben, eine Erhöhung der Leistungsfähigkeit, Motivation und Produktivität und geben keinen Anhaltspunkt für eine langfristige gesundheitliche Gefährdung. Die Beschäftigten, die nur im betrieblichen Arbeitsplatz arbeiten, weisen ein Risiko für mögliche negative Auswirkungen durch eine Mehrbelastung auf. Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-4614 ER - TY - THES A1 - Bhatti, Saad Ali T1 - Investigating the possibilities of AC GMA welding for in-situ alloying in additive manufacturing N2 - Additive manufacturing is a transformative approach of building 3D objects by layer-upon-layer method, adding digital flexibility and efficiency into the industrial production process. Different categories of materials such as plastics, metals, concrete, etc., can be used for Additive Manufacturing. At present, WAAM (Wire Arc Additive Manufacturing) is of high interest for many industries, as it allows creating large-scaled metallic components of moderate complexity with high density and good mechanical properties. In this master's Thesis, the capabilities of Gas Metal Arc (GMA) welding for in-situ alloying in multi-material WAAM are being investigated. A 6-axis FD-V6 welding robot by OTC Daihen along with Welbee W400 power supply was used to produce weldments both, with alternating current (AC), as well as pulsed direct current (DC). Two of Photron's High-Frequency cameras were used to investigate the process behavior. An All-in-one oscilloscope, Yokogawa DL850E ScopeCorder, was used to record the voltage and current signals. Single-layer, straight weldments were made to investigate the impact of different welding parameters over the weld seam shape and deposition rate. Later, the setup was extended to induce cold wire to change the chemical composition of the weld seams by in-situ alloying. Therefore, a clamp with adjustable angle, height, and distance was created to position the cold wire feeder along with the GMA welding nozzle. Cross-sections of weldments were taken to extract geometrical information related to the weld seam. In the end, combined experiments were done to investigate the process capabilities of generating weld seams of equal shape but different chemical composition by changing the wire feed speeds and the process parameters. This was the fundamental step for making the process ready for multi-material additive manufacturing. To demonstrate the process performance, two multi-material demonstrator components have been manufactured at the end of the thesis. Y1 - 2020 ER - TY - THES A1 - Marx, Clara T1 - Untersuchungen zur Hygiene in städtischen Kitas unter besonderer Berücksichtigung von Lebensmittelkontaktflächen N2 - Das Ziel dieser Arbeit war, verschiedene Faktoren zu identifizieren, die einen Einfluss auf die Keimbelastung in Küchen von Kindertagesstätten (KiTa) haben können. Dazu wurden in 28 städtischen KiTas Abklatschproben von Arbeitsoberflächen (AO) und Trockentüchern (TT) genommen, wobei TSA und MacConkey-Agar verwendet wurde. Die Proben wurden anschließend bebrütet und die Ergebnisse statistisch ausgewertet. Drei Faktoren hatten einen geringfügig signifikanten Einfluss auf die Gesamtkeimzahl (GK). Diese drei Faktoren waren das Reinigen der Arbeitsoberflächen nach jedem Arbeitsschritt (Einfluss auf GK TSA/MacConkey, AO), der Zeitpunkt der Beprobung nach 12 Uhr (Einfluss auf GK TSA, TT) und eine Waschtemperatur von über 60°C (Einfluss auf GK TSA, TT). Wobei letzterer Zusammenhang zwecks fehlender Evidenz eventuell als falsch positiv gewertet werden muss. Der Zutritt für Kinder zur Küche erwies sich als stark signifikanter Einflussfaktor (p<0,05) auf die Gesamtkeimzahl an Enterobacteriaceae (d.h. KbE auf MacConkey-Agar) auf den Arbeitsoberflächen. Durch die Ergebnisse der Arbeit konnte die Notwendigkeit für Hygiene-Schulungen unterstrichen werden, die nicht nur das Küchenpersonal, sondern auch Erzieher und vor allem Kinder mit einbeziehen. Zudem konnte gezeigt werden, dass übermäßiges Reinigen der Oberflächen eher zu einer Erhöhung der Keimzahl führt als zu einer weiteren Verringerung, was vermutlich vor allem auf einen erhöhten Eintrag von Keimen über Putzutensilien zurückzuführen ist. Alle verwendeten Materialien sollten daher bei Verwendung immer in einwandfreiem Zustand sein. KW - Lebensmittel KW - Hygiene KW - Kindergarten Y1 - 2020 ER - TY - THES A1 - Kieroth, Alexander T1 - An optimization approach for the distribution logistics using the example of the Vital Centrum Hodey KG N2 - This thesis analyses how the Travelling Salesman Problem can be solved by applying the Simplex LP and the Evolutionary Algorithm with regards to driven kilometres. Each algorithm is solved by using the Excel Solver add-in provided by Microsoft Excel. The results of the two different algorithms are compared with the results of the route planning software PTV Map&Guide Online for the purpose of having a proof that the software works efficiently. Using a cost analysis, the costs for delivering goods are calculated and compared with an external supplier who acted as the outbound logistics for the company HODEY. Now that the delivery is insourced, the costs can be reduced and HODEY gains more control over the outbound logistics. An approach on how to reduce the stop times at the customers’ homes is analysed. Thus, the analysis provides information regarding where the delivery driver wastes most of their time. Additionally, an available space calculation of the delivery vehicles is carried out for the dispatching department of the company to avoid interim loading or unloading not planned for a delivery or retrieval tour KW - Travelling salesman problem KW - Simplex LP KW - Evolutionary algorithm Y1 - 2020 ER - TY - BOOK A1 - Whitney, Cory W. A1 - Huth, Axel A1 - Kehlenbeck, Katja A1 - Hammer, Karl A1 - Gebauer, Jens T1 - Field Guide to Common Homegarden Crops of Southwestern Uganda N2 - Uganda’s homegardens are highly diverse small-scale farming systems. They provide the majority of the food consumed by local people and preserve a large number of traditional crops. This booklet provides a guide to common crops found in southwestern Uganda’s homegardens. It features descriptions and uses for 68 crops divided into four sections according to crop type (annual crops, perennial herbaceous crops, shrubs and trees). Crops are ranked according to their ethnobotanical importance. Each section begins with the most important crop. Each page has four photos of the crop and includes the most common local names (in Runyankole and Luganda), as well as the common English and botanical names. Additional information on the uses and occurrences is provided as well. We hope that this booklet will be of interest to a broad community of people interested in sustainable agriculture, food systems and food security issues: e.g. both Ugandan and international academics, non-government and government actors. KW - Uganda KW - Agroforestry KW - Africa KW - Agrobiodiversity KW - Plant genetic resources KW - Homegarden KW - Uganda KW - Agroforestry KW - Agrobiodiversity KW - Plant genetic resources Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-4510 ER - TY - THES A1 - Wiesel, Anika T1 - Das Lebenslange Lernen in der Berufswelt N2 - Die traditionelle Berufswelt, die nach der Erstausbildung geradlinig verläuft, existiert schon lange nicht mehr. Kontinuierliche Veränderungen, die geringe Haltbarkeit von Wissen und die zunehmende Komplexität der Berufswelt sorgen für die wachsende Bedeutung des Lebenslangen Lernens. Deshalb stehen Arbeitnehmer*innen heute vor der Herausforderung, in der Berufsphase zu lernen und sich neue Kompetenzen anzueignen. Obwohl es eine Vielzahl an Kompetenzmodellen für das Lebenslange Lernen gibt, beziehen sich diese meistens auf die Umsetzung in der Schule. Bezüglich des Themas Lebenslanges Lernen und Kompetenzen in der Berufswelt existiert noch eine Forschungslücke. Um diese zu schließen wird in dieser Arbeit (1) eine Einführung in die Thematik Lebenslanges Lernen und Kompetenzmodelle gegeben sowie (2) Kompetenzmodelle hinsichtlich ihrer benannten Kompetenzen analysiert und vor dem Hintergrund des Lebenslangen Lernens in der Berufswelt beurteilt. Das Ergebnis zeigt, dass die Kompetenzen Kommunikation, Kollaboration, Kreativität, kritisches Denken, Problemlösekompetenz, digitale Kompetenz, kulturelle Kompetenz, Informationsmanagement, Selbststeuerung, Flexibilität, ethisches Bewusstsein und unternehmerische Kompetenz das Lebenslange Lernen in der Berufswelt fördern. Weitere Faktoren, welche für das Lebenslange Lernen in der Berufswelt berücksichtigt werden müssen, sind: Sinnhaftigkeit, Anwendungsmöglichkeit und Motivation. Eine Einschränkung dieser Arbeit ist, dass sich nicht alle der analysierten Kompetenzmodelle auf die Berufswelt beziehen, weshalb fraglich ist, wie geeignet die verwendeten Kompetenzmodelle für die Untersuchung sind. Durch die Ergebnisse dieser Arbeit wird hervorgehoben, dass bezüglich des Themas Lebenslanges Lernen und Kompetenzen in der Berufswelt weiterhin Forschungsbedarf besteht. Zukünftige Forschung könnte die durch diese Arbeit gewonnen Ergebnisse durch noch ergänzende Untersuchungen mit anderen oder weiteren Kompetenzmodellen erweitern. N2 - The traditional professional world, which presupposes continuity of paths after initial training, has long ceased to exist. Continuous changes, the low durability of knowledge and the increasing complexity of the professional world foster the growing importance of lifelong learning. Today, employees are faced with the challenge of learning and acquiring new competences, even in the workplace. Although there are a variety of competence models for lifelong learning, these mostly relate to implementation at school. However, there is still a research gap on the subject lifelong learning and competences in the professional world. In order to bridge this gap, this essay will present (1) an introduction to the topic of lifelong learning and its competence models and (2) an analysis and assessment of the utility of these competence models in the professional world. The result shows that the competences of communication, collaboration, creativity, critical thinking, problem-solving skills, digital skills, cultural skills, information management, self-regulation, flexibility, ethical awareness and entrepreneurial skills promote lifelong learning in the professional world. Other aspects to consider regarding lifelong learning in the professional world are: Meaningfulness, possible application and motivation. These results are restricted by the fact that not all present competence models are fit for application in the professional world. Therefore, the question arises whether these competence models are suited for the investigation. Based on the outlined limitations, the essay thus calls for further research, which could expand the knowledge gained in this work by examining additional studies with other or further competence models. Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-4383 ER - TY - THES A1 - Chhabra, Vaibhaiv Bobby T1 - Design of a Robust Powertrain of an E-Bike Test Bench N2 - In the last few decades, environmental impacts of petroleum-based transportation have led to a renewed interest in electric transport infrastructure. E-bikes are zero-emission vehicles as they do not emit any combustion by-products. With the increasing demand for electric bikes over the past decades, the production of e-bikes has also rocketed. The purpose of this thesis is to optimize and design a robust power train of an e-bike test bench that is stationed in the Rhine-Waal University of Applied Sciences. The mechanical design of the present test bench is modular and flexible. The current test rig is susceptible to large disturbances due to vibrations in the chain drive mechanism. Due to the large segments in the chain drive, the torque results are also interrupted. These issues have been overcome by the substitution of the chain-drive mechanism to a belt-drive mechanism. The optimized power transmission system remains the same ensuring a smooth power flow in the system. In order to optimize the powertrain, three different concepts were proposed. Each concept was graded on the basis of different criteria with the help of Decision Matrix Analysis in order to choose the most promising concept. A conceptual 3D CAD model and 2D Drawings of the powertrain have been designed on SolidWorks for better reference. The substituted or the new parts that were essential for the new optimizing concept were decided with the help of a Morphological Box followed by a detailed Bill of Materials (BOM). The new powertrain was commissioned with the new parts as per the concept. The thesis further expands on the characteristics of the present test bench and the optimized test bench, the results and readings of the present test bench and the commissioning of the new powertrain. The thesis concludes with the possibility of the future work on the test bench and structural changes that are necessary for the e-bike that is to be tested. Y1 - 2020 ER - TY - THES A1 - Kösters, Dominic T1 - Production and Chromatographic Analysis of Polyhydroxybutyrate from waste product streams by Azohydromonas lata N2 - As conventional plastic production receives much criticism for being harmful to both humans and the environment, this work focused on establishing a batch fermentation based on waste substrates from local industries to produce polyhydroxybutyrate (PHB) with Azohydromonas lata (A. lata). Additionally, the produced PHB was characterised by qualitative and quantitative gas chromatography coupled to a mass spectrometer (GC-MS) and gel permeation chromatography (GPC). Multiple substrates, including rhubarb waste, pea waste, and dairy industry wastewater (KAAS medium), were tested for successful fermentation. Rhubarb and pea waste could not be used as a fermentation substrate due to obstacles in upstream processing. KAAS medium was prepared by centrifugation and sterile filtration and tested in a 1 L and 4 L fermentation yielding non-competitive biomass and PHB concentrations with 0.09 g/L and 0.004 g/L, respectively. A 3 L fermentation with pure saccharose as the carbon source served as a model for comparison and analysis and resulted in a measured biomass concentration of 3.58 g/L with a PHB content of 1.43 g/L after Soxhlet extraction. The GPC analysis led to no conclusive elograms and results due to issues in non-destructively extracting and solving the PHB. The GC-MS analysis showed excellent linearity with an R2 value of 0.9906 for the standard curve and clear chromatograms, which allowed for both qualitative and quantitative analysis of PHB. Since PHB concentrations from KAAS medium were low, no quantitative analysis could be performed. Only samples from the saccharose-based fermentation could be assessed quantitatively. The found maximum PHB concentration was 2.95 g/L, which deviated from the found 1.43 g/L after Soxhlet extraction and was therefore discussed in this work. No locally available waste substrate could be found to be suitable for an industrial scale fermentation. The findings during this work led to the conclusion that semi-sterile fermentation approaches shall be investigated in future works handling waste products as they can potentially overcome upstream processing steps and, hence, make rhubarb or pea waste a potential candidate for PHB production. Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-4246 ER - TY - THES A1 - Hammond, Luciano T1 - LIDAR and RADAR Sensors in Passenger Vehicles N2 - Automotive RADAR and LIDAR are two examples of sensor technologies used to observe the environment and detect objects surrounding the host vehicle, in order to enable ADAS. Naturally, the use of sensors in order to enable systems intended to protect and support the driver or improve their comfort entails stringent requirements; not only in terms of performance, but reliability and robustness as well. This has led to the continued development of sensor technologies, with developers seeking to additionally provide more compact and cost-effective alternatives to surrounding sensing; autonomous driving being the end goal, therefore entailing stricter requirements. Although both RADAR and LIDAR sensors are used for the same purpose, i.e. measuring the radial distance towards a target and determining its velocity relative to the host vehicle, they differ with regards to their functionalities, components, operation and various other aspects, leading to individual strengths and weaknesses. For example, RADAR is known for its impressive detection range, whereas LIDAR is known for its enhanced accuracy and resolution. These contrasting characteristics therefore indicate that either sensor may be preferred over the other in certain situations; perhaps in which one may perform better than the other, or due to other factors and aspects. This paper aims to analyse and compare the two sensor technologies and their use in passenger vehicles with respect to these various factors and aspects, in order to provide an insight into different cases in which one may be more suitable than the other. In general, a single sensor cannot definitively achieve all automotive requirements within all situations. Thus, a combination of sensors is recommended, in order to benefit from their individual strengths and ensure continuous system functionality and availability to detect the surrounding environment. KW - ADAS KW - RADAR KW - LIDAR KW - ITS KW - Automotive Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-4276 ER - TY - THES A1 - Oyewole, Oluwabusayomi T1 - Conversational design: the use of chatbot as an electoral information dissemination tool N2 - A steady decline in voter turnout has been recorded in many democratic countries, with young people (i.e Gen Z and Millennials) identified as a significant portion of those who don’t vote. Research has shown that one of the reasons young people do not vote is a lack of information about the electoral process, candidates and policies. Studies have also shown that preferred information dissemination medium is aligned across age groups, with older people trusting old media such as newspapers and young people leaning towards new media such as social media. With the recent advancement in machine learning, natural language interface and popularity of conversational agents such as chatbots, a new subset of new media has emerged. This study aims to investigate if chatbots could be an efficient medium for young people to access electoral information. It does this by comparing it with a website, using the EU electoral page as a case study. Based on the content of the EU electoral webpage, a chatbot was designed, trained and deployed on Telegram. Participants were randomly divided into two experimental groups (chatbot and website) and asked to find a list of crucial information, interact with the medium and then respond to the System usability scale (SUS), and a perception questionnaire. Observed data and interview notes were also taken. Analysis of the experimental data, observed data and surveys demonstrated that chatbot as a tool is inefficient as an electoral information tool because of the limitation of chatbot when out of scope questions are asked and limitation in following conversation contexts which is crucial to conversations. However, it is rated as above average on usability and joy of use, but raises questions on trust and data protection. It is recommended that the study be performed again when there are more advances to natural language processing to see if its efficiency as an electoral information medium will improve. A longitudinal study is also recommended to see if there’s a direct impact of chatbots as a tool, on young people’s motivation to vote. KW - Conversational design KW - Information KW - Chatbot KW - Election Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:1383-opus4-4294 ER -