Corresponding author der OTH Regensburg
Refine
Year of publication
Document Type
- Article (67)
- conference proceeding (article) (1)
- Review (1)
Has Fulltext
- yes (69) (remove)
Is part of the Bibliography
- no (69)
Keywords
- Power-to-Gas (4)
- Biomechanics (2)
- Electrolysis (2)
- Multibody dynamics (2)
- Photoacoustic spectroscopy (2)
- Power-to-X (2)
- magnetoactive elastomer (2)
- magnetoelectric effect (2)
- magnetostriction (2)
- methanation (2)
Institute
- Fakultät Maschinenbau (24)
- Fakultät Elektro- und Informationstechnik (17)
- Fakultät Informatik und Mathematik (16)
- Fakultät Angewandte Sozial- und Gesundheitswissenschaften (12)
- Regensburg Center of Biomedical Engineering - RCBE (8)
- Regensburg Center of Health Sciences and Technology - RCHST (8)
- Institut für Sozialforschung und Technikfolgenabschätzung (IST) (6)
- Forschungsstelle für Energienetze und Energiespeicher (FENES) / Forschungsgruppe Energiespeicher (5)
- Labor Empirische Sozialforschung (5)
- Regensburg Strategic IT Management (ReSITM) (5)
- Fakultät Angewandte Natur- und Kulturwissenschaften (4)
- Labor Biomechanik (LBM) (4)
- Labor Faserverbundtechnik (LFT) (4)
- Labor Intelligente Materialien und Strukturen (4)
- Labor Werkstoffrandschichtanalytik (4)
- Mechatronics Research Unit (MRU) (4)
- Sensorik-Applikationszentrum (SappZ) (4)
- Technologie-Campus Parsberg-Lupburg (4)
- Labor Biomaterialien (3)
- Labor für Technikfolgenabschätzung und Angewandte Ethik (LaTe) (3)
- Regensburg Medical Image Computing (ReMIC) (3)
- Labor Medizinprodukte (2)
- Technologie-Campus Neustadt an der Donau (2)
- Computational Mechanics and Materials Lab (CMM) (1)
- Fakultät Architektur (1)
- Fakultät Bauingenieurwesen (1)
- Forschungsstelle für Energienetze und Energiespeicher (FENES) / Forschungsgruppe Energienetze (1)
- Labor Biofluidmechanik (1)
- Labor Datenkommunikation (1)
- Labor Elektrische Maschinen und Antriebstechnik (1)
- Labor Finite-Elemente-Methode (FEM) (1)
- Labor Optische Übertragungssysteme (1)
- Labor Sorptionsprozesse (1)
- Labor für Baustoffe (1)
- Labor für Digitalisierung (LFD) (1)
Begutachtungsstatus
- peer-reviewed (67)
Im Betrieb von Förderbändern auftretende Phänomene sind das Bandwandern in Achsrichtung der Walzen und die Bandverformung in der Bandebene [1, S. 142]. Das Bandwandern ist bisher detailliert untersucht [2–4], während die Bandverformung Gegenstand weniger Veröffentlichungen ist. Deshalb wird in diesem Artikel eine Methode zur Berechnung der sich im dynamischen Betrieb einstellenden Verformung eines elastischen Förderbandes vorgestellt. Dazu wird ein Mehrkörpersimulations-Modell basierend auf der Lumped-Mass-Modellierung verwendet. Als Untersuchungsbeispiel dient ein Zwei-Walzensystem mit flexiblen und zylindrischen Walzen, sowie ein flexibles Förderband. Es zeigt sich, dass mit der Lumped-Mass-Modellierung eine dynamische Bandverformung, die von der gewählten Diskretisierung abhängt, berechnet werden kann. Aufgrund dieser Abhängigkeit ist es notwendig eine Konvergenzanalyse durchzuführen. Zusätzlich ist darauf zu achten, dass die künstliche Anregung aufgrund der Lumped-Mass-Modellierung nicht mit einer Eigenfrequenz des Modells zusammenfällt.
Transient surrogate modeling of modally reduced structures with discontinuous loads and damping
(2024)
In this work, a surrogate model for structural, transient and discontinuously excited finite element method simulations is developed. This allows to reduce the computational effort of repeated calculations of identical models under different load cases. The architecture of the surrogate combines fully connected neural network layers with long short-term memory layers. For the reproduction of different damping ratios, a categorical variable is added to the continuous input data. Based on a recursive flow of the predicted data back to the input layer, long-term dependencies do not vanish due to short-input sequences. The system dimension is reduced by applying the model-order reduction technique for modal decomposition. The high accuracy of the surrogate and the reduction of computational costs are shown on an academic example of a cantilever beam and a real-world example of a robot. The advantages of our approach are illustrated in comparison with state-of-the-art surrogates for transient finite element analysis. By using the surrogate proposed in this study, oscillations due to discontinuous excitation of mechanical structures can be reproduced. For this purpose, only short-input sequences are necessary since the excitation of the oscillations does not have to be part of the input sequence during the whole duration of the oscillations. Due to the categorical variable for the damping ratio, the surrogate can account for the influence of different damping in parameter studies.
AbstractRegularized static friction models have been used successfully for many years. However, they are unable to maintain static friction in detail. For this reason, dynamic friction models have been developed and published in the literature. However, commercial multibody simulation packages such as Adams, RecurDyn, and Simpack have developed their own specific stick-slip models instead of adopting one of the public domain approaches. This article introduces the fundamentals of these commercial models and their behavior from a practical point of view. The stick-slip models were applied to a simple test model and a more sophisticated model of a festoon cable system using their standard parameters.
An inexpensive UV-LED photoacoustic based real-time sensor-system detecting exhaled trace-acetone
(2024)
n this research we present a low-cost system for breath acetone analysis based on UV-LED photoacoustic spectroscopy. We considered the end-tidal phase of exhalation, which represents the systemic concentrations of volatile organic compounds (VOCs) – providing clinically relevant information about the human health. This is achieved via the development of a CO2-triggered breath sampling system, which collected alveolar breath over several minutes in sterile and inert containers. A real-time mass spectrometer is coupled to serve as a reference device for calibration measurements and subsequent breath analysis. The new sensor system provided a 3σ detection limit of 8.3 ppbV and an NNEA of 1.4E-9 Wcm 1Hz 0.5. In terms of the performed breath analysis measurements, 12 out of 13 fell within the error margin of the photoacoustic measurement system, demonstrating the reliability of the measurements in the field.
Significant deformations of bodies made from compliant magnetoactive elastomers (MAE) in magnetic fields make these materials promising for applications in magnetically controlled actuators for soft robotics. Reported experimental research in this context was devoted to the behaviour in the quasi-static magnetic field, but the transient dynamics are of great practical importance. This paper presents an experimental study of the transient response of apparent longitudinal and transverse strains of a family of isotropic and anisotropic MAE cylinders with six different aspect ratios in time-varying uniform magnetic fields. The time dependence of the magnetic field has a trapezoidal form, where the rate of both legs is varied between 52 and 757 kA/(s·m) and the maximum magnetic field takes three values between 153 and 505 kA/m. It is proposed to introduce four characteristic times: two for the delay of the transient response during increasing and decreasing magnetic field, as well as two for rise and fall times. To facilitate the comparison between different magnetic field rates, these characteristic times are further normalized on the rise time of the magnetic field ramp. The dependence of the normalized characteristic times on the aspect ratio, the magnetic field slew rate, maximum magnetic field values, initial internal structure (isotropic versus anisotropic specimens) and weight fraction of the soft-magnetic filler are obtained and discussed in detail. The normalized magnetostrictive hysteresis loop is introduced, and used to explain why the normalized delay times vary with changing experimental parameters.
The human nose serves as the primary gateway for air entering the respiratory system and plays a vital role in breathing. Nasal breathing difficulties are a significant health concern, leading to substantial healthcare costs for patients. Understanding nasal airflow dynamics is crucial for comprehending respiratory mechanisms. This article presents a detailed study using tomo-Particle Image Velocimetry (PIV) to investigate nasal airflow dynamics while addressing its accuracy. Embedded in the OpenNose project, the work described aims to provide a validation basis for different numerical approaches to upper airway flow. The study includes the manufacturing of a transparent silicone model based on a clinical CT scan, refractive index matching to minimize optical distortions, and precise flow rate adjustments based on physiological breathing cycles. This method allows for spatial high-resolution investigations in different regions of interest within the nasopharynx during various phases of the breathing cycle. The results demonstrate the accuracy of the investigations, enabling detailed analysis of flow structures and gradients. This spatial high-resolution tomo-PIV approach provides valuable insights into the complex flow phenomena occurring during the physiological breathing cycle in the nasopharynx. The study's findings contribute to advancements in non-free-of-sight experimental flow investigation of complex cavities under nearly realistic conditions. Furthermore, reliable and accurate experimental data is crucial for properly validating numerical approaches that compute this patient-specific flow for clinical purposes.
Test Setup for Investigating the Impact Behavior of Biaxially Prestressed Composite Laminates
(2024)
Instrumented impact testing and compression-after-impact testing are important to adequately qualify material behavior and safely design composite structures. However, the stresses to which fiber-reinforced plastic components are typically subjected in practice are not considered in the impact test methods recommended in guidelines or standards. In this paper, a test setup for investigating the impact behavior of composite specimens under plane uniaxial and biaxial preloading is presented. For this purpose, a special test setup consisting of a biaxial testing machine and a specially designed drop-weight tower was developed. The design decisions were derived from existing guidelines and standards with the aim of inducing barely visible impact damage in laminated carbon fiber-reinforced plastic specimens. Several measurement systems have been integrated into the setup to allow comprehensive observation of the impact event and specimen behavior. A feasibility test was performed with biaxially prestressed carbon fiber-reinforced plastic specimens in comparison with unstressed reference tests. The compressive-tensile prestressing resulted in lower maximum contact forces, higher maximum deflections, higher residual deflections and a different damage pattern, which was investigated by light microscopic analysis. Finally, the functionality of the experimental setup is discussed, and the results seem to indicate that the test setup and parameters were properly chosen to investigate the effect of prestresses on the impacts behavior of composite structures, in particular for barely visible subsequent damages.
In the field of computer- and robot-assisted minimally invasive surgery, enormous progress has been made in recent years based on the recognition of surgical instruments in endoscopic images and videos. In particular, the determination of the position and type of instruments is of great interest. Current work involves both spatial and temporal information, with the idea that predicting the movement of surgical tools over time may improve the quality of the final segmentations. The provision of publicly available datasets has recently encouraged the development of new methods, mainly based on deep learning. In this review, we identify and characterize datasets used for method development and evaluation and quantify their frequency of use in the literature. We further present an overview of the current state of research regarding the segmentation and tracking of minimally invasive surgical instruments in endoscopic images and videos. The paper focuses on methods that work purely visually, without markers of any kind attached to the instruments, considering both single-frame semantic and instance segmentation approaches, as well as those that incorporate temporal information. The publications analyzed were identified through the platforms Google Scholar, Web of Science, and PubMed. The search terms used were “instrument segmentation”, “instrument tracking”, “surgical tool segmentation”, and “surgical tool tracking”, resulting in a total of 741 articles published between 01/2015 and 07/2023, of which 123 were included using systematic selection criteria. A discussion of the reviewed literature is provided, highlighting existing shortcomings and emphasizing the available potential for future developments.
Although magnesium and its alloys are promising candidates as biodegradable implant materials, the tendency for localized corrosion mechanism in physiological environment limit their biomedical application. Electropolishing is an attractive strategy for improving the corrosion behaviour of metals, but it is still largely unexplored in magnesium materials. In this study, the characterization of electropolished surfaces of AM50 and pure magnesium was performed, focussing on their in vitro degradation behaviour in cell medium. Corrosion rates were evaluated using potentiodynamic polarisation. The surface morphology before and after the onset of corrosion was investigated by scanning electron microscopy and confocal laser scanning microscopy. The presented electropolishing process led to improved surface performances, observable by significantly lower corrosion rates (0.08 mm·year-1 in Dulbecco's modified Eagle's medium), lower arithmetical mean height (0.05 µm), lower water contact angle (25-35°) and lower micro hardness (35-50 HV 0.1) compared to mechanically and chemically treated surfaces. MgO/Mg(OH)2 could be detected on electropolished surfaces. The localized corrosion mode could be reduced, but not entirely prevented. Electropolishing shows great potential as post-treatment of magnesium-based components, but detailed tests of the long-term corrosion behaviour are an important area of future research.
Review of elasto-static models for three-dimensional analysis of thick-walled anisotropic tubes
(2023)
Most shell or beam models of anisotropic tubes under bending have no validity for thick-walled structures. As a result, the need to develop three-dimensional formulations which allow a change in the stress, strain and displacement distributions across the radial component arises. Basic formulations on three-dimensional anisotropic elasticity were made either stressor displacement-based by Lekhnitskii or Stroh on plates. Lekhnitskii also was the first to expand these analytical formulations to tubes under various loading conditions. This paper presents a review of the stress and strain analysis of tube models using three-dimensional anisotropic elasticity. The focus lies on layered structures, like fiber-reinforced plastics, under various bending loads, although the basic formulations and models regarding axisymmetric loads are briefly discussed. One section is also dedicated to the determination of an equivalent bending stiffness of tubes.
Following a ban on many materials containing bisphenol-A, new bisphenol-free Boron silicates have been found as substitutes. The purpose of this study is to describe the mechanical properties of these bisphenol-free magnetoactive borosilicate polymers containing hard magnetic particles. Samples of 0%, 33% and 66% by wt. were loaded for compression using a universal testing machine. The maximum forces occurring for different travel speeds were compared before and after post-magnetization treatments. The post-magnetization included 2 stages. In addition, the change in mechanical properties within 24 hours after the post-magnetization process was investigated. Furthermore, the influence of speed and particle content were investigated. In general, there is a correlation between the required compressive force and, the level of post-magnetization stress, the increase in travel speed and particle content in the boron silicate. Comparison of the non-post-magnetized and post-magnetized samples using two-tailed t-tests shows that the p-values for all weight fraction changes in NdPrFeB particles and travel speeds are less than 0.001. Also, a comparison between tests in which the traverse speed was varied also showed significant changes in the resulting compression forces. The same is valid for changes in the weight ratio of the NdPrFeB particles in the samples. For post-magnetized samples, no significant difference can be observed in the first 24 hours following magnetization. In summary, the material presents viscoelastic, plastic force-displacement behavior, which can be well recognized by its bi-linear curve shape.
The investigation shows that borosilicate polymers based on NdPrFeB can have their mechanical behavior modified and controlled by post-magnetization processes. This opens new possibilities for many future applications.
Hintergrund/Zielsetzung
Der Beitrag befasst sich mit dem Wissenstand und der Einstellung der Bevölkerung. Betrachtet werden die Übermittlung und Verfügbarkeit von Gesundheitsdaten, Gesundheitsregister, die elektronische Patientenakte, Einwilligungsverfahren für die Übermittlung von Daten und der Zugriff auf Gesundheitsdaten zu Forschungszwecken.
Methoden
Die Studie basiert auf einer computergestützten Telefonbefragung (Dual-Frame) bei einer Zufallsstichprobe der Bevölkerung in Deutschland im Zeitraum 01.-27.06.2022 (n = 1.308).
Ergebnisse
Der Wissensstand zur Übermittlung von Gesundheitsdaten an Krankenkassen ist hoch, wohingegen das Vorhandensein zentraler Sterbe-, Impf- und Gesundheitsregister sowie der Zugriff auf Gesundheitsdaten durch behandelnde Ärztinnen und Ärzte überschätzt werden. Die Akzeptanz medizinischer Register ist sehr hoch. Die elektronische Patientenakte ist bei der Hälfte der Bevölkerung unbekannt, die Nutzungsbereitschaft ist eher gering ausgeprägt; bei der Übertragung von Daten wird eine Zustimmungsoption bevorzugt, und über achtzig Prozent würden die Daten der elektronischen Patientenakte zur Forschung freigeben. Drei Viertel würden ihre Gesundheitsdaten allgemein zur Forschung freigeben, insbesondere an Universitäten in Deutschland, wobei meist Anonymität Bedingung ist. Die Bereitschaft zur Datenfreigabe steigt mit der Höhe des Vertrauens in die Presse sowie in Universitäten und Hochschulen, und sie sinkt, wenn ein Datenleck als schwerwiegend erachtet wird.
Diskussion und Schlussfolgerung
In Deutschland besteht, wie in anderen europäischen Ländern, eine große Bereitschaft zur Freigabe von Gesundheitsdaten zu Forschungszwecken. Dagegen ist der Wunsch zur Nutzung der elektronischen Patientenakte eher gering. Ebenso niedrig ist die Akzeptanz einer Widerspruchsoption, die jedoch als Voraussetzung für eine erfolgreiche Einführung einer elektronischen Patientenakte gilt. Vertrauen in die Forschung und staatliche Stellen, die Gesundheitsdaten verarbeiten, sind zentrale Faktoren.
LuGre or not LuGre
(2023)
The LuGre model is widely used in the analysis and control of systems with friction. Recently, it has even been made available in the commercial multibody dynamics simulation software system Adams. However, the LuGre model exhibits well-known drawbacks like too low and force rate-dependent break-away forces, drift problems during sticking periods, and significant differences in non-stationary situations between the pre-defined friction law and the one produced by the LuGre model. In the present literature, these problems are supposed to come from the model dynamics or its nonlinear nature. However, most of these drawbacks are not simple side effects of a dynamic friction model but are caused in the LuGre approach, as shown here, by a too simple and inconsistent model of the bristle dynamics. Standard examples and a more practical application demonstrate that the LuGre model is not a “what you see is what you get” approach. A dynamic friction model with accurate bristle dynamics and consistent friction force is set up here. It provides insight into the physical basis of the LuGre model dynamics. However, it results in a nonlinear and implicit differential equation, whose solution will not be easy because of the ambiguity of the friction characteristics. The standard workaround, a static model based on simple regularized characteristics, produces reliable and generally satisfactory results but definitely cannot maintain a stick. The paper presents a second-order dynamic friction model, which may serve as an alternative. It can maintain a stick and produces realistic and reliable results.
Titanium is used in many areas due to its excellent mechanical, biological and corrosion-resistant properties. Implants often have thin and filigree structures, providing an ideal application for fine cutting with laser. In the literature, the main focus is primarily on investigating and optimizing the parameters for titanium sheets with thicknesses greater than 1 mm. Hence, in this study, the basic manufacturing parameters of laser power, cutting speed and laser pulse of a 200 W modulated fiber laser are investigated for 0.15 mm thick grade 2 titanium sheets. A reproducible, continuous cut could be achieved using 90 W laser-power and 2 mm/s cutting-speed. Pulse pause variations between 85 and 335 μs in 50 μs steps and a fixed pulse width of 50 μs show that a minimum kerf width of 23.4 μm, as well as a minimum cut edge roughness Rz of 3.59 μm, is achieved at the lowest pulse pause duration. An increase in roughness towards the laser exit side, independent of the laser pulse pause duration, was found and discussed. The results provide initial process parameters for cutting thin titanium sheets and thus provide the basis for further investigations, such as the influence of cutting gas pressure and composition on the cut edge.
Although adopting Low Code Development Platforms (LCDPs) promises significant efficiency and effectiveness improvements for application development, its adoption still needs further empirical research. This paper uses a combinatorial approach to research LCDP adoption and presents the results of a multiple mini case study with 36 cases on LCDP adoption. A combination of the Socio-Technical Systems theory and the Technology-Organisational-Environment model is used as a theoretical lens. In this paper, we show that LCDP adoption is a multifaceted phenomenon and identify three archetypes for LCDP adoption (i.e., IT Resource Shortage Mitigators, Application Development Democratisers, and Synergy Realisers) and one archetype for LCDP non-adoption (i.e., Intricacy Adversaries). Each archetype can be interpreted as an individual path towards LCDP (non-)adoption. Based on these archetypes, we derive seven starting points for practitioners to adopt LCDPs in work systems. Moreover, by using the theoretical lenses, the paper shows that for an LCDP adoption to occur, an optimisation of the social and technical sub-systems is required.
Für Fußballer:innen stellen muskuläre Verletzungen der unteren Extremitäten ein großes Problem dar. Ein Beispiel hierfür liefert die Nationalmannschaftsstürmerin Alexandra Popp, die aufgrund muskulärer Probleme das EM-Finale 2022 in Wembley kurzfristig verpasste. Oftmals stehen gerade hohe Anspannungssituationen in zeitlichem Zusammenhang mit Verletzungen, der Einfluss der psychischen Beanspruchung auf die biomechanischen Belastungen wird jedoch meist nur wenig beachtet.
Die Situation von Menschen im Pflegeheim, die besonders dem Risiko der „pflegebedingten Verarmung“ ausgesetzt sind, ist in der Forschung wenig präsent. Der Beitrag befasst sich mit dem Erleben von Unsicherheiten, Armut und prekären Lebenslagen älterer Menschen im Heim. Grundlage liefern Daten einer ethnographischen Studie zum Älterwerden und zum Leben mit chronischen Erkrankungen. Anhand von Fällen wird ein Spektrum prekärer Lebenslagen skizziert. Deutlich wird u. a.: Menschen mit diversen soziobiografischen Hintergründen können im Zuge von Hilfebedürftigkeit und Heimübergängen von Unsicherheiten, Armut und prekären Lebenslagen betroffen sein. Nicht zu wissen, ob das verfügbare Geld genügt, um Kostensteigerungen bis zum Lebensende zu decken, kennzeichnet eine häufig erlebte Zukunftsunsicherheit; drohende Armut bzw. die Abhängigkeit von Sozialhilfe können pflege- und institutionell bedingte Verlusterfahrungen von Autonomie, Teilhabe und Lebensgestaltung verschärfen und den Gesamtzustand weiter destabilisieren. Das Erleiden bleibt weitgehend unsichtbar; strukturelle Probleme werden individualisiert.
Ziel der Studie:
Ziel der Studie ist die Messung des Stands der Digitalisierung und die mit einer Anbindung an die Telematikinfrastruktur verbundenen Chancen und Herausforderungen für Rehabilitationseinrichtungen.
Methodik:
Teilstandardisierte Online-Befragung bei Trägern von Rehabilitationseinrichtungen in Bayern (n=33). Der Fragebogen mit 36 Fragen beinhaltet eine leicht veränderte Skala auf Basis des „Electronic Medical Record Adoption Model (EMRAM)“.
Ergebnisse:
Der Digitalisierungsgrad wurde in 70 Prozent der Rehabilitationseinrichtungen mit Stufe 0 angegeben (Stufenmodell bis 7). Die Übermittlung patientenbezogener Daten (Eingang und Ausgang) erfolgt häufig analog, wohingegen die Verarbeitung innerhalb der Einrichtung in vielen Fällen bereits überwiegend digital ist. Beim Anschluss an die Telematikinfrastruktur wird hoher Aufwand bei der Installation, aber auch der Schulung des Personals und der Anpassung der Arbeitsorganisation gesehen.
Schlussfolgerung:
Durch Änderung der gesetzlich-finanziellen Lage in Deutschland eröffnen sich für Rehabilitationseinrichtungen neue Möglichkeiten einer verstärkten Digitalisierung. Hürden hängen mit Anforderungen an IT-Sicherheit, Schulung des Personals und sowie dem ebenfalls geringen Digitalisierungsstand bei Krankenhäusern und Ärzt*innen sowie Patient*innen zusammen, die eine digitale Datenübermittlung erschweren.
New structural sheet metal parts are developed in an iterative, time-consuming manner. To improve the reproducibility and speed up the iterative drawability assessment, we propose a novel low-dimensional multi-fidelity inspired machine learning architecture. The approach utilizes the results of low-fidelity and high-fidelity finite element deep drawing simulation schemes. It hereby relies not only on parameters, but also on additional features to improve the generalization ability and applicability of the drawability assessment compared to classical approaches. Using the machine learning approach on a generated data set for a wide range of different cross-die drawing configurations, a classifier is trained to distinguish between drawable and non-drawable setups. Furthermore, two regression models, one for drawable and one for non-drawable designs are developed that rank designs by drawability. At instantaneous evaluation time, classification scores of high accuracy as well as regression scores of high quality for both regressors are achieved. The presented models can substitute low-fidelity finite element models due to their low evaluation times while at the same time, their predictive quality is close to high-fidelity models. This approach may enable fast and efficient assessments of designs in early development phases at the accuracy of a later design phase in the future.
The study is based on a German single-topic population survey on vaccination willingness against COVID-19 (VWC) by the authors (2020, n = 2014). The single-topic survey allowed us to test several competing explanations for VWC, as discussed in the literature. The VWC in the sample was 67.3%. Logistic regression was used to identify factors affecting VWC. Being at high risk from COVID-19 and having received flu vaccination have a positive impact on VWC. Perceived VWC of friends has a strong positive effect on respondents’ VWC. Bivariate relationships of gender, age, and level of education with VWC were no longer significant in a multivariate analysis. Trust in alternative medicine and belief in conspiracy theories have a negative effect on VWC.