Fakultät Maschinenbau
Refine
Document Type
- Article (2)
Language
- English (2)
Has Fulltext
- no (2)
Is part of the Bibliography
- no (2)
Keywords
- fatigue strength (2) (remove)
Institute
Begutachtungsstatus
- peer-reviewed (2)
In fatigue strength assessment, the methods based on ideal elastic stresses according to Basquin and the less established method based on elastic-plastic stress quantities according to Manson, Coffin and Morrow are applied. The former calculates loads using linear-elastic stresses, the latter requires elasticplastic evaluation parameters, such as stresses and strains. These can be determined by finite element analysis (FEA) with a linear-elastic constitutive law, and subsequent conversion to elastic-plastic loads, using the macro support formula by Neuber. In this contribution, an alternative approach to approximate elastic-plastic parameters proposed by Glinka is compared to the the strain-life method using Neuber's formula, as well as the stress-life method of Basquin. Several component tests on 42CrMoS4-QT specimens are investigated. To determine the input data for the fatigue strength evaluations, the entire test setup is computed by FEA. The nodal displacements from these validated full-model simulations are used as boundary conditions for a submodel simulation of a notch, whose results serve as input for the fatigue strength assessments. It is shown that all approaches provide a reliable assessment of components. Our key result is that the strain-life method using the concept by Glinka for notch stress computation, yields improved results in fatigue strength assessments.
This paper presents experimental fatigue tests on specially shaped specimens made from quenched and tempered steel 42CrMoS4 and nodular cast iron EN-GJS-600-3. The specimens are geometrically designed to resemble actual subcomponents of forming and cutting dies for sheet metal manufacturing. These subcomponents have failed in the past.Experiments are carried out using a fictive load-time function, which is a modification of an actually measured load curve and has variable mean and amplitude values. This first test series serves as a general validation of a subsequent fatigue analysis. A second test series is carried out with constant mean and amplitude values with a load ratio 𝑅≈0. Here, the load frequencies in the individual test runs are varied between f = 5 Hz and f = 45 Hz in order to investigate the influence of the frequency. Both series are performed on a servo-hydraulic testing machine.The experimental data is then statistically evaluated. The values for the scatter correlate with data from the literature. The data from the test series with the fictive load-time function can thus be used for subsequent validation of a fatigue calculation, which will be addressed in a future publication. Most significant are the findings from the second series of experiments with varied load frequencies, as a significant frequency influence could be detected. Furthermore, the hardening and softening behavior under cyclic loading and the fracture behavior of the materials are analyzed and compared with data from the literature.