Refine
Document Type
Language
- English (5)
Has Fulltext
- no (5)
Is part of the Bibliography
- no (5) (remove)
Keywords
- Distributed feedback devices (3)
- Laser feedback (3)
- Optical coupling (3)
- Etching (2)
- Gratings (2)
- Nickel (2)
- Optical device fabrication (2)
- Bandwidth (1)
- CMOS (1)
- Fiber lasers (1)
Institute
Begutachtungsstatus
- peer-reviewed (2)
Self-assembled and coherently strained Ge dots were grown on a Si/SiGe superlattice, which was deposited on a flat Si(001) substrate surface patterned with a regular array of straight trenches. The superlattice translates the surface modulation of the substrate into a strain-field modulation, which causes the Ge dots on its surface to form along straight lines above the buried trenches. This approach provides self-assembled Ge dots with excellent lateral periodicity, which might be useful for fabricating dot-based field-effect-transistors (DotFETs). Here, we propose the concept of a modulation-doped p-channel DotFET (p-MOD-DotFET). The p-MOD-DotFET relies on embedded Ge-rich nanostructures, which provide p-channels through the Ge-rich dots. A high Ge concentration in the dots is desirable in order to exploit the high hole mobility of Ge-rich material. We show that the commonly observed Si–Ge intermixing during Si capping of Ge dots can be suppressed by overgrowing the islands at low temperature.
We present a new method for fabrication of tunable InGaAsP-InP single mode lasers without epitaxial overgrowth. These devices show the advantage of a considerably simplified fabrication process compared to conventional tunable laser types. The lasers comprise an active Bragg reflector integrated with an uncorrugated separately pumped gain region. To overcome the extensive and expensive overgrowth step we realized a surface grating on both sides of the ridge mesa, which provides DFB operation. By adjusting the current through the Bragg reflector, the wavelength can be tuned between 1590.8 nm and 1595.2 nm. A maximum of 11 wavelength channels with an average spacing of ~0.5 nm and a constant optical output power of ~0.5 mW are addressable.
A new method for fabrication of tunable InGaAsP-InP single-mode lasers without epitaxial overgrowth is reported. These devices show the advantage of a considerably simplified fabrication process compared to conventional tunable laser types. The lasers comprise an active Bragg reflector integrated with an uncorrugated separately pumped gain region. By adjusting the current through the Bragg reflector, the wavelength can be tuned between 1590.8 and 1595.2 nm.
Laterally coupled distributed feedback lasers with self-aligned ohmic contacts show the advantage of a considerably simplified fabrication process. These lasers exhibit superior spectral properties with full benefit from the gain coupling mechanism. Side-mode suppression ratios up to 55- and 3-dB bandwidths beyond 15 GHz were obtained for these devices.