Refine
Document Type
Has Fulltext
- no (5)
Is part of the Bibliography
- no (5)
Institute
Begutachtungsstatus
- peer-reviewed (2)
The average strain state of Ge films grown on Si(111) by surfactant mediated epitaxy has been compared to the ordering of the interfacial misfit dislocation network. Surprisingly, a smaller degree of average lattice relaxation was found in films grown at higher temperature. On the other hand, these films exhibit a better ordered dislocation network. This effect energetically compensates the higher strain at higher growth temperature, leading to the conclusion that, apart from the formation of misfit dislocations, their ordering represents an important channel for lattice-strain energy relaxation.
For a characterization of interface and “bulk” properties of Ge films grown on Si(111) by Sb surfactant-mediated epitaxy, grazing incidence x-ray diffraction and transmission electron microscopy have been used. The interface roughness, defect structure, and strain state have been investigated in dependence of film thickness and growth temperature. For all growth parameters, atomically smooth interfaces are observed. For thin Ge layers, about 75% of the strain induced by the lattice mismatch is relaxed by misfit dislocations at the Ge/Si interface. Only a slight increase of the degree of relaxation is found for thicker films. At growth temperatures below about 600 °C, the formation of twins is observed, which can be avoided at higher temperatures.
In this contribution, field-induced interactions of magnetizable particles embedded into a soft elastomer matrix are analyzed with regard to the resulting mechanical deformations. By comparing experiments for two-, three- and four-particle systems with the results of finite element simulations, a fully coupled continuum model for magneto-active elastomers is validated with the help of real data for the first time. The model under consideration permits the investigation of magneto-active elastomers with arbitrary particle distances, shapes and volume fractions as well as magnetic and mechanical properties of the individual constituents. It thus represents a basis for future studies on more complex, realistic systems. Our results show a very good agreement between experiments and numerical simulations—the deformation behavior of all systems is captured by the model qualitatively as well as quantitatively. Within a sensitivity analysis, the influence of the initial particle positions on the systems' response is examined. Furthermore, a comparison of the full three-dimensional model with the often used, simplified two-dimensional approach shows the typical overestimation of resulting interactions in magneto-active elastomers.