Refine
Year of publication
Document Type
- Article (19)
- conference proceeding (article) (18)
- Part of Periodical (4)
Is part of the Bibliography
- no (41)
Keywords
- additive manufacturing (8)
- Forschung (3)
- Forschungsbericht (3)
- Multi-Material Parts (3)
- material qualification (3)
- Laser-based hot-melt bonding (2)
- Polymers (2)
- laser beam melting (2)
- laser beam melting of polymers (2)
- Additive manufacturing (1)
Institute
- Fakultät Maschinenbau (31)
- Labor Additive and Intelligent Manufacturing for Sustainability (AIMS) (26)
- Technologie-Campus Parsberg-Lupburg (8)
- Fakultät Angewandte Natur- und Kulturwissenschaften (6)
- Labor Laser-Materialbearbeitung (LMP) (6)
- Labor Nanoanalytik und Halbleiterchemie (Nanochem) (5)
- Hochschulleitung/Hochschulverwaltung (4)
- Institut für Angewandte Forschung und Wirtschaftskooperationen (IAFW) (3)
- Labor Maschinendynamik und Strukturanalyse (LMS) (1)
- Labor Mikrosensorik (1)
Begutachtungsstatus
- peer-reviewed (17)
Forschungsbericht 2016
(2016)
Purpose – The purpose of this paper is to demonstrate the processability of cohesive PE-HD particles in laser beam melting processes (LBM) of polymers. Furthermore, we present a characterization method for polymer particles, which can predict the quality of the powder deposition via LBM processes. Design/methodology/approach – This study focuses on the application of dry particle coating processes to increase flowability and bulk density of PE-HD particles. Both has been measured and afterwards validated via powder deposition of PE-HD particles in a LBM machine. Findings – For efficient coating in a dry particle coating process, the PE-HD particles and the attached nanoparticles need to show similar surface chemistry, i.e. both need to behave either hydrophobic or hydrophilic. It is demonstrated that dry particle coating is appropriate to enhance flowability and bulk density of PE-HD particles and hence considerably improves LBM processes and the resulting product quality. Originality/value – At present, in LBM processes mainly polyamide (PA), 12 particles are used, which are so far quite expensive in comparison to, for example, PE-HD particles. This work provides a unique and versatile method for nanoparticulate surface modification which may be applied to a wide variety of materials. After the coating, the particles are applicable for the LBM process. Our results provide a correlation between flowability and bulk density and the resulting product quality.
Im Rahmen dieses Beitrags wird das Schmelzeemulgieren als Verfahren zur Herstel-lung von Polymermikropartikeln vorgestellt. In diesem Prozess wird zunächst ein Polymergranulat in einer kontinuierlichen Phase in Gegenwart geeigneter Additive in einem Rührbehälter aufgeschmolzen, die Rohemulsion in einer Rotor-Stator-Einheit feinemulgiert und anschließend zu einer Suspension abgekühlt. Der Einfluss von Prozessparametern und Systemzusam-mensetzung auf das Emulgierergebnis wird diskutiert und die Anwendbarkeit des Verfahrens für polymere Mikropartikeln anhand von Polypropylen (PP) und Polyethylen (PE-HD) dargestellt. Die erhaltenen Suspensionen werden zur Überführung in Pulverform sprühgetrocknet und die Fließeigenschaften des Pulvers analysiert. Durch trockenes Beschichten mit pyrogener Kieselsäure kann die Fließfähigkeit der erhaltenen Partikeln weiter verbessert werden. Das Verfahren bietet somit einen neuen Zugang zur Herstellung neuer Ausgangsmaterialien für die Additive Fertigung.
Forschung 2019
(2019)
Forschung 2018
(2018)
In the paper first results regarding the realisation of gradient and multi-material parts manufactured by Laser Beam Melting in powder bed of metals and polymers are published. Gradient properties of additively manufactured metal parts can be achieved by varying the composition of alloying components in the powder and adapting process strategies. As an alternative to atomizing pre-alloyed materials, mixtures of different powders are investigated. For realizing multi-material-parts from polymers, at first relevant material properties concerning compatibility have to be analysed. Therefore the paper shows the main requirements for compatibility between different materials and also first results regarding the compatibility of polymer powders and possible combinations for the manufacturing of multi-material components by laser beam melting of polymers.
Neue Prozessstrategien zur Herstellung von Multi- Material-Bauteilen und Gradientenwerkstoffen
(2012)
Das additive Fertigungsverfahren, dem gemeinhin die größten Potentiale zugesprochen werden, ist das Laserstrahlschmelzen im Pulverbett von Kunststoffen (LSS-K) und von Metallen (LSS-M). Wie bei anderen Techniken der additiven Fertigung werden Bauteile direkt aus CAD-Dateien ohne zusätzliche Werkzeuge bei enormer konstruktiver Freiheit gefertigt. Die resultierenden Werkstoffeigenschaften sind vergleichbar mit konventionelleren Prozessrouten wie etwa dem Spritzgießen thermoplastischer Polymere beziehungsweise auf der Seite der Metalle dem Schmieden oder Gießen. Derzeit wird der Einsatz des LSS zur Fertigung von Endprodukten in kleinen Stückzahlen erschwert von nicht ausreichender Prozessstabilität und, insbesondere bei Kunststoffen, von der eingeschränkten Werkstoffauswahl. Bisher werden für beide Werkstoffklassen Bauteile aus jeweils einem einzigen Ausgangsmaterial hergestellt. Näherungsweise erzeugt LSS also einheitliche Materialeigenschaften über das gesamte Bauteil hinweg. Ein Ansatz, der in den Teilprojekten A5 und B6 des Sonderforschungsbereichs 814 verfolgt wird, ist die Realisierung von Multi-Material-Bauteilen mittels LSS-K beziehungsweise LSS-M.
First results regarding the realisation of multi-material components manufactured by Laser Beam Melting of polymers and metals are published. For realising composite structures from polymer powders by additive manufacturing, at first relevant material properties regarding compatibility have to be analysed. The paper shows the main requirements for compatibility between different materials and offers first results in form of a compatibility matrix of possible combinations for composite structures.For achieving gradient properties of additively manufactured metal parts by using composite materials the composition of alloying components in the powder and adapted process strategies are varied. As an alternative to atomizing pre-alloyed materials, mixtures of different powders are investigated.
The joint strength is gaining importance in quasi -simultaneous laser transmission welds, especially in structural components. A correlation between the joint strength and a process characteristic is a basic requirement for selecting the best process parameter setting. In this work, the temperature is measured during welding polyamide 6 by using a scanner-integrated pyrometer with an InGaAs-detector. The filtering of the heat radiation in the upper joining partner is taken into account by calibrating the mea surement system. By this, the measured temperature signal represents the temperature in the joining zone. A correlation is found between the measured temperature and the resulting joint strength. Moreover, high joint strengths are also seen for welds with short welding times, as far as the temperature is sufficiently high. With this knowledge, a process window can be derived easily in order to produce welds with high strength and short welding times.
Quality and reliability are of the utmost importance for manufacturing in the optical and medical industries. Absorber-free laser transmission welding enables the precise joining of identical polymers without additives or adhesives and is well-suited to meet the demands of the aforementioned industries. To attain sufficient absorption of laser energy without absorbent additives, thulium fiber lasers, which emit in the polymers’ intrinsic absorption spectrum, are used. Focusing the laser beam with a high numerical aperture provides significant intensity gradients inside the workpiece and enables selective fusing of the internal joining zone without affecting the surface of the device. Because seam size and position are crucial, the high-quality requirements demand internal weld seam monitoring. In this work, we propose a novel method to determine weld seam location and size using optical coherence tomography. Changes in optical material properties because of melting and re-solidification during welding allow for weld seam differentiation from the injection-molded base material. Automatic processing of the optical coherence tomography data enables the identification and measurement of the weld seam geometry. The results from our technique are consistent with microscopic images of microtome sections and demonstrate that weld seam localization in polyamide 6 is possible with an accuracy better than a tenth of a millimeter.
Simultaneous Laser Beam Melting of polymers (SLBM) allows the generation of multi-material components,consisting of different thermoplastic polymers, within one additive building process. Besides the common advantagesof conventional Laser Beam Melting (LBM), multi-material components built by SLBM can fulfill different productrequirements like different chemical resistances or haptic material properties within a single part. To achieve suchparts, different powder materials are deposited next to each other and preheated a few degrees below their meltingtemperatures by infrared emitters and laser radiation (λ = 10.60 μm), before in the last step the preheated powdersare molten simultaneously by an additional laser source (λ = 1.94 μm). In this paper, different polymer powders likepolypropylene (PP) and polyamide 12 (PA12) are used for the generation of multi-material specimens. By varyingdifferent building parameters according to a specified design of experiments, their influence on the part properties isanalyzed. Important building parameters are the intensity and the irradiation time of the laser beam used for meltingthe preheated powders. Besides using tensile tests to determine the tensile strength and the elongation at break, theaverage part height in dependence of the energy input is analyzed. The overall aim is to specify the correlationbetween different building parameters regarding the energy deposition on the resulting part properties.
Powder based Additive Manufacturing technologies offer huge potential for building parts with almost no geometrical restrictions, but both the process controlling as well as the part properties are strongly dependent on different material characteristics of the material, like the flowability. In this work, different weight percentages of nano-scaled silica dioxide particles (Aerosil®) are admixed to pure polyethylene and polypropylene powder and the resulting flowability is determined. Besides using the Hausner ratio as standardized value, the degree of coverage is introduced as a new characteristic to quantify the powder flowability. The degrees of coverage are compared to the Hausner ratios to allow a discussion and evaluation about the different characteristic values. Additionally, tensile bars consisting of polypropylene are generated to determine the porosity by cross sections and the mechanical part properties by tensile testing. As mechanical part properties, the tensile strength and elongation at break are determined and the effects of different powder flowability on these properties are analyzed.
The mechanical properties of polymer parts built by Selective Laser Sintering are strongly related to the internal microstructure which differs with the applied production parameters. The paper focuses on the back tracing of the pore morphology of laser sintered polyamide-12 samples to the process parameters. Therefore, a data base is used which is supplied by a Round Robin initiative and includes mechanical tensile tests and the microstructural analysis of the pore morphology of several different sample charges built with different machines. The pore morphologies (porosity, pore density, pore shape and pore arrangement) measured by X-ray computed tomography are compared and discussed regarding the employed parameters and the resulting mechanical properties. The investigations point out that pore density is a superior indicator than porosity for mechanical issues. This is especially valid along the build direction since pore morphology has shown to be strongly anisotropic. Moreover, the analysis revealed that pore density is strongly affected by the process temperature, which is proved to be essential for the fabrication of mechanical robust parts using Selective Laser Sintering.
By Laser Beam Melting of polymers (LBM), parts with almost any geometry can be built directly out of CAD files without the need for additional tools. Thus, prototypes or parts in small series production can be generated within short times. Up to now, no multi-material parts have been built by LBM, which is a major limitation of the technology. To realize multi-material parts, new mechanisms for depositing different polymer powders as well as a new irradiation strategy are needed, by which polymers with different melting temperatures can be warmed to their specific preheating temperatures and be molten simultaneously. This is achieved by simultaneous laser beam melting (SLBM). In the process, two different materials are deposited next to each other and preheated a few degrees below their melting temperatures by infrared emitters and laser radiation (λ = 10.60 µm), before in the last step the two preheated powders are molten simultaneously by an additional laser (λ = 1.94 µm). So far, multi-material tensile bars have been realized and analyzed regarding their boundary zone between both materials. The experiments showed that the temperature gradients in the boundary zone and along the building direction seem to be of great importance for the process stability and the resulting part properties. Therefore, a detailed analysis of the occurring temperature gradients during the process is needed to identify adequate process adjustments regarding the temperature controlling. To analyze the temperature gradients, thermocouples positioned inside the powder bed are used. By varying the temperature of the building platform, the influence of different temperature gradients on the resulting part properties is shown.
In this paper, first results regarding the realization of multi-material parts by Simultaneous Laser Beam Melting (SLBM) of polymers are presented. This new approach allows the layerwise generation of parts consisting of different polymer materials within one building process. Besides the typical advantages of additive manufacturing technologies, such parts can fulfill different product requirements concomitant and therefore could enlarge the overall field of application. The powder materials used for this paper are polyethylene (PE) and a polyamide based thermoplastic elastomer (TPE). After depositing the powder materials next to each other, infrared-emitters heat the lower melting polymer and a CO2 laser provides the preheating temperature of the higher melting polymer. In the last step, a thulium fibre laser melts the two preheated powders simultaneously. The realized specimens are characterized by cross sections and their tensile strengths are determined. Additionally, the new approach of the simultaneous energy irradiation is investigated using a Finite Element Analysis in order to gain a more profound process understanding. In that sense, the influence of the size of the exposure area on the reachable maximum temperatures inside that area was analyzed by the simulation and compared to experimental studies.
By simultaneous laser beam melting (SLBM), parts consisting of different polymer powders can be additively manufactured within one building process. Besides the advantages of conventional LBM, e.g., not needing additional tools and being able to realize parts with almost any geometry, different product requirements can be achieved within a single part. Product requirements may be different chemical resistances or haptic material properties. Therefore, SLBM enlarges the application field for additive manufacturing in general. In the process, two different materials are deposited on the building platform and preheated a few degrees below the melting temperature of the lower melting polymer by infrared emitters. Afterward, a CO2 laser (λ = 10.6 μm) provides the energy for the temperature difference between the preheating temperatures of both materials. Finally, a digital light processing chip is used to achieve simultaneous and flexible energy deposition for melting both preheated polymers. By illuminating the chip with a laser, parts of the beam can be flexibly guided onto the powder bed or into a beam trap. As laser, a single mode thulium laser (λ = 1.94 μm) is used. After melting the layer, a new layer is deposited and the process starts anew. In this paper, polypropylene and polyamide 12 are used as materials. After analyzing the material and melting behavior during the process by a high-resolution thermal imaging system, the parts are qualified regarding their material compatibility at the boundary zone and porosity by cross sections.
By selective laser sintering (SLS), polymer powders are molten layer by layer to build conventional prototypes or parts in small series with geometrical freedom that cannot be achieved by other manufacturing technologies. The SLS process is mainly defined by the beam–matter interaction between powder material, laser radiation and different material characteristics by itself. However the determination of these different material characteristics is problematic because powder material imposes certain requirements that cannot sufficiently be provided by conventional measurement methods. Hence new fundamental investigation methods to determine the optical and thermal material characteristics like the thermal diffusivity, thermal conductivity, or the influence of different heating rates on the melting behavior are presented in this paper. The different analysis methods altogether improve the process of understanding to allow recommendations for the future process controlling.
By simultaneous laser beam melting (SLBM), different polymer powders can be processed to multi-material parts, which offers the potential to enlarge the field of application for conventional LBM. In a SLBM process, a powder bed consisting of different polymers and therefore with different melting and crystallization temperatures is deposited. Besides the use of infrared emitters for preheating the lower melting polymer, a CO2 laser distributes the necessary preheating temperature of the higher melting polymer. In the last step, a thulium fibre laser distributes the energy necessary for melting the two preheated powders simultaneously. In order to analyze the temperature gradients of the process on the powder surface and in deeper layers, a high-resolution thermal imaging system and thermocouples are used.