Refine
Document Type
- Article (17)
- conference proceeding (article) (11)
- Report (8)
- Part of a Book (7)
Is part of the Bibliography
- no (43)
Keywords
- Construction robotics (3)
- On-site (3)
- Robotics (3)
- Systems engineering (3)
- automation (3)
- prefabrication (3)
- COVID-19 (2)
- Construction 4.0 (2)
- Construction technology (2)
- Gerontechnology (2)
Institute
Begutachtungsstatus
- peer-reviewed (25)
Digital Twins (DT) implementation in the Built Environment (BE) industry is still in its early stages. Aiming to increase the knowledge about DT, this study analyzes how DT can be understood in the BE sector and investigates its different potential benefits and expected challenges. To do so, the Systematic Literature Review (SLR) approach was employed. Using 228 publications, the current study presents a proposed definition and structure for DT systems. The proposed structure is based on four main layers: physical, digital, application, and user layers. The study also classified the applications of DT into six groups: sustainability and environmental, facility management, safety, health, and risk management, structural performance, construction management, and architectural and urban-related applications. The challenges of DT implementation were also grouped based on industry-related, social and organizational, economic, technological, and political and legal challenges. Based on the results, future research directions and practical recommendations were presented to support the successful deployment of the technology.
The construction industry, supported by the materials industry, is a major user of natural resources. Automation and robotics have the potential to play a key role in the development of circular construction by increasing productivity, reducing waste, increasing safety, and mitigating labor shortages. Starting with a brief synopsis of the history of construction robotics and the concept of robot-oriented design, this article presents exemplary case studies of research projects and entrepreneurial activities in which the authors have participated that have contributed to the advancement of concrete construction. The activities of the authors have systematically led to spin-offs and start-ups, especially in recent years (e.g., CREDO Robotics GmbH, ARE23 GmbH, KEWAZO GmbH, ExlenTec Robotics GmbH, etc.), which shows that the use of construction robots is becoming an important part of the construction industry. With the use of automation and robotics in the built environment especially for concrete construction, current challenges such as the housing shortage can be addressed using the leading machinery and robot technology in Germany and other parts of the world. The knowledge and know-hows gained in these endeavors will lay the groundwork for the next frontier of construction robotics beyond the construction sites.
Bauautomatisierung und Robotik im Betonbau: Fallstudien zu Forschung, Entwicklung und Innovation
(2023)
The use of robotics in construction projects is still in its infancy despite the opportunities that robots can present for the improvement of construction practices. One of the strategies to effectively increase the reliance on robots in construction is increasing the knowledge and improving the educational programs about robotics for university students. This paper contributes to the ongoing efforts worldwide to improve the teaching methods about construction robotics through the presentation of a novel method called “Imagine and Make”, in which students learn how to integrate robotics in different aspects and practices in construction projects. The method has been applied at Centrale Lille in France since 2018. The results of the application of “Imagine and Make” in the first semester of 2021–2022, evaluation by students, and teaching outcomes are reported in this paper.
Beton ist das am meisten verwendete Baumaterial weltweit. CO2-Emissionen, die bei der Zement- und Betonherstellung an-fallen, müssen reduziert, Produktionsmethoden verbessert und Betonzusammensetzungen angepasst werden. Zudem steigt die Nachfrage nach Beton, während fossile Brennstoffreserven und die Verfügbarkeit von mineralischen Rohstoffen abnehmen. Hinzu kommt, dass bei der Betonherstellung neue mineralogi-sche Phasen entstehen, was ein echtes Recycling erschwert. Die Implementierung kreislaufkonformer Strategien wie der Verlängerung der Nutzungsphase ist ein wichtiger Hebel, um Umweltwirkungen im Bauwesen zu reduzieren, und erfordert die ganzheitliche Betrachtung des Bauwerks. Besonders großes Potenzial liefern hier die digital vernetzte und modellba-sierte Planung sowie die darauf aufbauende robotergestützte Fertigung der Bauteile, mit der sich leicht lösbare Verbindun-gen, einfach rückbaubare, multifunktionale, flexible sowie bzgl. Dauerhaftigkeit optimierte Strukturen ökologisch und kosten-effizient generieren lassen. Technisch wären bereits viele Pro-jekte in der Praxis umsetzbar, allerdings müssen hierzu die rechtlichen Rahmenbedingungen verbessert und bürokratische Hürden abgebaut werden. Dieser Beitrag hat das Ziel, das Be-wusstsein für den nötigen Wechsel von der Linear- zur Kreis-laufwirtschaft im Betonbau und den korrespondierenden Daten zu erhöhen und dem Planer einfache Grundsätze für den Ent-wurf, die Ausschreibung und Umsetzung mitzugeben, um jetzt schon einen wichtigen Beitrag zum verantwortungsvollen Um-gang mit immer knapper werdenden Ressourcen zu leisten.
Digital workflows in the Architecture, Engineering and Construction (AEC) industry have been working with a wide range of software solutions trying to enable a Design-to-Production (DtP) end-to-end data flow. Thereby, state-of-the-art software solutions attempt to streamline the design and production processes accordingly.
However, most digital workflows lack in terms of adequate sequential data preparation, agglomeration, and interfacing capabilities for consecutive design phases. These issues result in long, tedious correction loops, a wide range of software solutions and extensions to mitigate the issues. In addition, many digital workflows do not consider or integrate construction, production and machine relevant data holistically (respectively geometry and semantics). In this context, the production relevant data in from of human-centered work process data referring to digital human models (DHM), derived human abilities, safety and ergonomic criteria are often neglected. However, this is essential to interface the construction, human and machine relevant data in a holistic manner.
This paper therefore proposes a DtP-workflow which is intended to solve some of the issues by interfacing relevant software solutions incorporating construction, production (including DHM and more) and machine relevant data in a holistic manner using a Building Information Modeling (BIM)-approach (based on the IFC schema). In this regard, the DtP-workflow aims to reverse common top-down digital workflows by considering and integrating the relevant data for consecutive design phases from the beginning. Subsequently, the DtP-workflow should achieve a reduction in planning effort.
Um den zunehmenden Anforderungen an die Beherrschung digitaler Techniken und an die Fähigkeit zur interdisziplinären Zusammenarbeit an Studierende aller Fachrichtungen zu begegnen wurde das interdisziplinäre Lehrformat Digitalisierungskollegs für Studierende entwickelt. Das in vielen Fachbereichen ausbaufähige Angebot von Digitalthemen in der Hoch- schullehre wird hiermit dauerhaft erweitert. Ein Digitalisierungskolleg besteht aus einer Vorlesungs- reihe mit angrenzendem Seminar, in denen Studierende interdisziplinäre Lösungen für Fragen der digitalen Transformation entwickeln. Geleitet werden sie von etablierten Wissenschaftlerinnen und Wissenschaftlern, aktiv betreut und ausgestaltet von ein bis zwei Coaches. Kernelement sowohl des Kollegs als auch der einzelnen Projekte ist die Interdisziplinarität. Eine*r der beteiligten Projekt- leiter*innen hat einen direkten Bezug zur Technik und kommt aus der Informatik, der Wirtschafts- informatik, der Elektrotechnik oder vergleichbaren Disziplinen. Zielgruppe der Projekte sind Studierende verschiedener Disziplinen im Masterstudium oder in den letzten Semestern eines Bachelorstudiums. Durch die Teilnahme erwerben auch Studierende aus digitalisierungsfernen Fächern frühzeitig umfangreiche IT-Kenntnisse. Als Begleiteffekt der umfangreichen Vernetzung zwischen den Digitalisierungskollegs (Studierende, Coaches und Projektleitende) entsteht bereits zu Beginn einer wissenschaftlichen Karriere eine große digitale Community. Alle Teilnehmenden lernen frühzeitig die interdisziplinäre Zusammenarbeit und verbessern erheblich ihre Karriere- chancen innerhalb und außerhalb der Wissenschaft.
The use of robotics in construction projects is still in its infancy despite the opportunities that robots can present to the improvement of construction practices. One of the strategies to effectively increase the reliance on robots in construction is increasing the knowledge and improving the educational programs about robotics for university students. This paper contributes to the ongoing efforts around the world to improve the teaching methods about construction robotics through the presentation of a novel method that is called “Imagine and Make”, in which students learn how to integrate robotics in different aspects and practices in construction projects. The method has been applied at Centrale Lille in France since 2018. The results of the application of “Imagine and Make” in the first semester in 2021-2022, evaluation by students, and teaching outcomes are reported in this paper. Keywords – Robotics, Construction management techniques, Construction 4.0, Robotics teaching, France
A cable-driven parallel robot (CDPR) was developed for the installation of curtain wall modules (CWM). The research addressed the question of whether the CDPR was capable installing CWMs with sufficient accuracy while being competitive compared to conventional manual methods. In order to develop and test such a system, a conceptual framework that consisted of three sub-systems was defined. The tests, carried out in two close-to-real demonstration buildings, revealed an absolute accuracy of the CWM installation of 4 to 23 mm. The working time for installing a CWM was reduced to 0.51 h. The results also show that the system is competitive for a workspace greater than 96 m2 compared to conventional manual methods. However, improvements such as reducing the hours for setting up the CDPR on the one hand and achieving a faster and more robust MEE on the other hand will be still necessary in the future.
In recent years, there has been an increase in robots that perform activities in the built environment. In this chapter, projects were featured as case studies to demonstrate the potential of using automation and robotic technologies to facilitate building façade installation tasks. The Building Energy Renovation Through Timber-Prefabricated Modules (BERTIM) and the Highly automatEd PHysical Achievements and performancES using cable roboTs Unique Systems (HEPHAESTUS) research projects consist of researching, developing and prototyping different automated solutions for the handling of building envelopes in various processes of the installation sequence. The BERTIM research project focuses on building envelope upgrading, automated building façade manufacturing, while the HEPHAESTUS research project is focused on the cable-driven parallel robot for the installation of curtain wall modules. Both projects have proved the potential use of new technologies for the installation of prefabricated envelopes and reduced working time and costs during installation.
Due to a constantly growing interest in construction robots, guidance on the design and management for its development process is needed to employ the best practice know-how and accelerate efficient development and marketisation. The development of construction robots usually involves stakeholders from the construction sector, non-construction sectors, and investors. A systematic design management method can help to integrate the needs and aims of different stakeholders and team members during the development process. Therefore, a procedure model for the development of construction robots is proposed as an integrative guidance on how to systematically conceptualise engineer requirements and to design, develop, implement, evaluate, manage, and mature the designs of construction robots. Several recent projects have been used by the authors to test and verify parts of the proposed cyclic method. In addition, the authors explain how the proposed model has been composed of an adapted set of proven principles and methodologies from the systems engineering and management field and highlight the specific concepts for developing and testing the construction robots. The application of the procedure model revealed that the concept and method are feasible and, in principle, can provide a comprehensive and practical guide on the steps forward. A unique characteristic of the proposed procedure model is the core principle which allows the evolvement over time with each cycle of use. In addition, interchangeable elements can be inserted into the procedure model depending on the region, type of robot, and technical readiness level.
Special issue ISARC 2021
(2022)
The research filed of construction robotics broadens increasingly in terms of complexity, approaches, technologies used, active stakeholders, and application areas. Worldwide labour and resource shortages, the need to increase circularity and resource efficiency, new materials and the increasing utilisation of digital construction tools in the planning and construction industry massively spur the uptake of robotic solutions for on-site construction.
The initial boom of construction robots happened in the 1970s, driven by the Japanese construction industry. In the 1980s, a combination with parallel developments was supposed to achieve complete, integrated robotic on-site factories. From the mid-1980s onwards, the global interest in construction robots decreased gradually. Bulky and expensive systems, complex on-site navigation and logistics approaches, a narrow scope of tasks, inflexibility, incompatibility with on-site work organisation and professional qualification, low usability and insufficient inter-robot coordination capabilities revealed the immaturity of the systems. Only a few organisations predominantly situated in Asia such as Takenaka, Obayashi, Kajima Corporation, Nihon Bisho Co., Samsung, and Hitachi maintained development activities.
However, since the mid-2010s, development activities are gaining traction again. On the application side, this is mainly driven by trends such as the need to upgrade the energy performance of buildings in Europe, a global necessity to remove asbestos from existing structures, and a demand for enormous quantities of high-rise buildings all over East Asia. On the system side, the renewed interest stems from major advances in physical–mechanical robot technology in other automation-driven industries such as the automotive industry. Robots became lighter, more flexible, their parts modular and interchangeable, more user friendly as well as significantly cheaper. On the digital side, the BIM-to-Robot pipeline was subject of intensive reserach and development. More and more methods and tools help to increase the usability of robots and facilitate the simulation and optimisation of robot-driven construction processes.
In the last 4–5 years, the worldwide growing need and interest in construction robotics became highly evident. More than 200 robot systems are pushed by start-ups and spin-offs and their investors to the market. This is backed by an enormous number of activities and projects carried out in the academic area pushing to the boundaries of what is technologically possible.
Major associations and their conferences increase significantly in popularity such as ISARC (International Association for Automation and Robotics in Construction), EC3 (European Council of Computing in Construction), and Robots in Architecture. Competency in digital construction, automation and robotics becomes a key for all stakeholders in the construction industry and many universities worldwide launch dedicated interdisciplinary programs. Powerful governments (China) and major funding programs such as Horizon Europe (Europe) massively request and fund the development of robotic solutions for construction such as drones, mobile robots, 3D-printing solutions, cable-driven robots, and exoskeletons. Regulators and standardisation organisation start to develop the first certification and standardisation schemes for construction robots and large software companies make attempts to allow to simulate and program robotic construction processes efficiently and robustly based on digital building and construction data.
To showcase the diversity of cutting-edge research in the area, this special issue invited eight extended versions of selected papers from the ISARC 2021 conference. As such, this issue covers digital approaches to embed fabrication and robot information in BIM and IFC and program robots directly from digital building models. New robot systems spur novel robotic production processes, and machine learning enable novel logistics approaches for building components that may ultimately lead to robotic cranes and other robotic on-site logistics and handling solutions (including autonomous construction machines). In parallel, systematic evaluation and robot development methods are developed that allow to shed light on their performance in the construction process.
As use of digital fabrication increases in architecture, engineering and construction, the industry seeks appropriate management and processes to enable the adoption during the design/planning phase. Many enablers have been identified across various studies; however, a comprehensive synthesis defining the enablers of design for digital fabrication does not yet exist. This work conducts a systematic literature review of 59 journal articles published in the past decade and identifies 140 enablers under eight categories: actors, resources, conditions, attributes, processes, artefacts, values and risks. The enablers' frequency network is illustrated using an adjacency matrix. Through the lens of actor-network theory, the work creates a relational ontology to demonstrate the linkages between different enablers. Three examples are presented using onion diagrams: circular construction focus, business model focus and digital twin in industrialisation focus. Finally, this work discusses the intersection of relational ontology with process modelling to design future digital fabrication work routines.
As use of digital fabrication increases in architecture, engineering and construction, the industry seeks appropriate management and processes to enable the adoption during the design/planning phase. Many enablers have been identified across various studies; however, a comprehensive synthesis defining the enablers of design for digital fabrication does not yet exist. This work conducts a systematic literature review of 59 journal articles published in the past decade and identifies 140 enablers under eight categories: actors, resources, conditions, attributes, processes, artefacts, values and risks. The enablers’ frequency network is illustrated using an adjacency matrix. Through the lens of actor-network theory, the work creates a relational ontology to demonstrate the linkages between different enablers. Three examples are presented using onion diagrams: circular construction focus, business model focus and digital twin in industrialisation focus. Finally, this work discusses the intersection of relational ontology with process modelling to design future digital fabrication work routines.
Population aging is one of the major challenges facing the world. In particular, the advent of China's aging society caused by various factors will be a major threat to its future development. Therefore, serious measures need to be taken to achieve its demographic sustainability. Smart furniture can be considered as a novel subcategory of gerontechnology. One of the main outcomes of the EU-funded REACH project was a variety of smart furniture named Personalized Intelligent Interior Units (PI2Us) which served as the key component of a distributed intelligent home to promote the health and activity level of older adults. This outcome can potentially be a solution to mitigate the consequences caused by population aging. In order to understand the attitudes and opinions of Chinese older adults towards the relevant technologies, the authors conducted an opinion survey using the PI2Us as an example, which sampled more than 380 older adults in 26 out of 34 provincial-level administrative divisions of China. The survey showed that Chinese older adults in general have a highly positive attitude towards smart furniture and smart home technologies. Several other insights also can be revealed from the survey. Based on further analyses, the paper summarized why the elderly-oriented smart furniture and distributed intelligent home has the potential to thrive in China's market soon. Finally, a three-year project action plan for implementing localized solutions in cooperation with a large Chinese furniture manufacturer was presented.
COVID-19 and the ageing workforce: global perspectives on needs and solutions across 15 countries
(2021)
BACKGROUND: COVID-19 has a direct impact on the employment of older people. This adds to the challenge of ageism. The World Health Organization has started a worldwide campaign to combat ageism and has called for more research and evidence-based strategies that have the potential to be scaled up. This study specifically aims to identify solutions to combat the adverse effects of COVID-19 on the global ageing workforce.
METHODS: We present 15 case studies from different countries and report on what those countries are doing or not doing to address the impact of COVID-19 on ageing workers.
RESULTS: We provide examples of how COVID-19 influences older people's ability to work and stay healthy, and offer case studies of what governments, organizations or individuals can do to help ensure older people can obtain, maintain and, potentially, expand their current work. Case studies come from Australia, Austria, Canada, China, Germany, Israel, Japan, Nigeria, Romania, Singapore, Sweden, South Korea, Thailand, United Kingdom (UK), and the United States (US). Across the countries, the impact of COVID-19 on older workers is shown as widening inequalities. A particular challenge has arisen because of a large proportion of older people, often with limited education and working in the informal sector within rural areas, e.g. in Nigeria, Thailand and China. Remedies to the particular disadvantage experienced by older workers in the context of COVID are presented. These range from funding support to encouraging business continuity, innovative product and service developments, community action, new business models and localized, national and international actions. The case studies can be seen as frequently fitting within strategies that have been proven to work in reducing ageism within the workplace. They include policy and laws that have increased benefits to workers during lockdowns (most countries); educational activities such as coaching seniorpreneurship (e,g, Australia); intergenerational contact interventions such as younger Thai people who moved back to rural areas and sharing their digital knowledge with older people and where older people reciprocate by teaching the younger people farming knowledge.
CONCLUSION: Global sharing of this knowledge among international, national and local governments and organizations, businesses, policy makers and health and human resources experts will further understanding of the issues that are faced by older workers. This will facilitate the replication or scalability of solutions as called for in the WHO call to combat ageism in 2021. We suggest that policy makers, business owners, researchers and international organisations build on the case studies by investing in evidence-based strategies to create inclusive workplaces. Such action will thus help to challenge ageism, reduce inequity, improve business continuity and add to the quality of life of older workers.
Guest Editorial Introduction to the Focused Section on Mechatronics and Automation for Constructions
(2021)
Rapid advances in modern technologies have completely revolutionized many industries in recent years. It is anticipated that mechatronic and automation technologies would play an important role in transforming the construction industry to embrace for the fourth industrial revolution. However, construction automation problems bring up new research challenges that diverge from traditional methods. Unlike the factory environment, which is typically structured and predictable, construction sites are dynamic places where the working environment is unstructured and always changing. Due to lack of skilled labor, time and cost overruns, quality deficiencies, and the recent pandemics, mechatronic and automation technologies offer solutions for future safe, rapid, performative, prize worthy, and digitally protocolled construction projects. The coexistence of human workers, heavy vehicles, varying environmental conditions, and automated mechatronic systems also make safe human–machine interaction an important issue. Beyond expertise in a specific discipline, construction automation also requires multidisciplinary expertise to integrate with various fields, such as Internet of Things (IOT), robotics and its construction oriented subsystems, adaptive/robust control, machine vision, sensing technologies, artificial intelligence (AI), and building/construction/process information modeling (BIM/CIM/PIM) for automated construction process management and design. The main aims of this focused section in the IEEE/ASME Transactions on Mechatronics (TMECH) are to document the current state of the art in mechatronics and automation for constructions, and to present new results in several emerging research areas.