Refine
Year of publication
Document Type
- conference proceeding (article) (25)
- Article (15)
- Part of Periodical (6)
- Report (5)
- conference talk (4)
- conference proceeding (presentation, abstract) (3)
- Part of a Book (2)
Is part of the Bibliography
- no (60)
Keywords
- Kunststoff (6)
- Laserdurchstrahlschweissen (4)
- Forschung (3)
- Forschungsbericht (3)
- Prozessüberwachung (3)
- Fließgeschwindigkeit (2)
- Laserschweissen (2)
- Pyrometrie (2)
- Schmelzen (2)
- Schweißnaht (2)
Institute
Begutachtungsstatus
- peer-reviewed (11)
Forschungsbericht 2016
(2016)
Forschungsbericht 2017
(2017)
Obwohl das Laserdurchstrahlschweißen sehr reproduzierbar arbeitet, können Fehler aus den Vorprozessen Compoundieren, Spritzgießen etc. das Schweißergebnis negativ beeinflussen. Dem Anwender steht inzwischen eine breite Palette an Prozessüberwachungsmethoden zur Verfügung, um eine gleich bleibende Produktqualität zu erzielen.
The joint strength is gaining importance in quasi -simultaneous laser transmission welds, especially in structural components. A correlation between the joint strength and a process characteristic is a basic requirement for selecting the best process parameter setting. In this work, the temperature is measured during welding polyamide 6 by using a scanner-integrated pyrometer with an InGaAs-detector. The filtering of the heat radiation in the upper joining partner is taken into account by calibrating the mea surement system. By this, the measured temperature signal represents the temperature in the joining zone. A correlation is found between the measured temperature and the resulting joint strength. Moreover, high joint strengths are also seen for welds with short welding times, as far as the temperature is sufficiently high. With this knowledge, a process window can be derived easily in order to produce welds with high strength and short welding times.
Quality and reliability are of the utmost importance for manufacturing in the optical and medical industries. Absorber-free laser transmission welding enables the precise joining of identical polymers without additives or adhesives and is well-suited to meet the demands of the aforementioned industries. To attain sufficient absorption of laser energy without absorbent additives, thulium fiber lasers, which emit in the polymers’ intrinsic absorption spectrum, are used. Focusing the laser beam with a high numerical aperture provides significant intensity gradients inside the workpiece and enables selective fusing of the internal joining zone without affecting the surface of the device. Because seam size and position are crucial, the high-quality requirements demand internal weld seam monitoring. In this work, we propose a novel method to determine weld seam location and size using optical coherence tomography. Changes in optical material properties because of melting and re-solidification during welding allow for weld seam differentiation from the injection-molded base material. Automatic processing of the optical coherence tomography data enables the identification and measurement of the weld seam geometry. The results from our technique are consistent with microscopic images of microtome sections and demonstrate that weld seam localization in polyamide 6 is possible with an accuracy better than a tenth of a millimeter.