Refine
Year of publication
Document Type
- conference proceeding (article) (25)
- Article (20)
Is part of the Bibliography
- no (45)
Keywords
- Pipeline (5)
- Deformation (4)
- Running ductile fracture (4)
- BEHAVIOR (3)
- Fracture (3)
- Plasticity (3)
- Alloy (2)
- Bruchmechanik (2)
- CO2 decompression (2)
- Crack arrest (2)
Institute
Begutachtungsstatus
- peer-reviewed (20)
Customized additively manufactured (laser powder bed fused (L-PBF)) stents could improve the treatment of complex lesions by enhancing stent-artery conformity. However, geometric irregularities inherent for L-PBF stents are expected to influence not only their mechanical behavior but also their interaction with the artery. In this study, the influence of geometrical irregularities on stent-artery interaction is evaluated within a numerical framework. Thus, computed arterial stresses induced by a reconstructed L-PBF stent model are compared to those induced by the intended stent model (also representing a stent geometry obtained from conventional manufacturing processes) and a modified CAD stent model that accounts for the increased strut thickness inherent for L-PBF stents. It was found that, similar to conventionally manufactured stents, arterial stresses are initially related to the basic stent design/topology, with the highest stresses occurring at the indentations of the stent struts. Compared to the stent CAD model, the L-PBF stent induces distinctly higher and more maximum volume stresses within the plaque and the arterial wall. In return, the modified CAD model overestimates the arterial stresses induced by the L-PBF stent due to its homogeneously increased strut thickness and thus its homogeneously increased geometric stiffness compared with the L-PBF stent. Therefore, the L-PBF-induced geometric irregularities must be explicitly considered when evaluating the L-PBF stent-induced stresses because the intended stent CAD model underestimates the arterial stresses, whereas the modified CAD model overestimates them. The arterial stresses induced by the L-PBF stent were still within the range of values reported for conventional stents in literature, suggesting that the use of L-PBF stents is conceivable in principle. However, because geometric irregularities, such as protruding features from the stent surface, could potentially damage the artery or lead to premature stent failure, further improvement of L-PBF stents is essential.
The worldwide growing energy demand with the exploration of new gas fields has promoted the development of high toughness seamless pipeline steels which should sustain the increasing demands resulting from the complex loading situations. One of the most important prerequisites for safe installation and operation of long distance gas transmission pipelines is the detailed knowledge and characterization of their fracture performance for specific applications. However, recent industry experience has revealed concerns related to the limitations and reliability of current test methods for brittle-to-ductile transition evaluation. Regarding the transition temperature evaluation, the critical issues involve Drop-Weight Tear Testing (DWTT) and full-scale West-Jefferson (WJ) test applied to the smaller pipes with diameter less than 500mm. The DWTT leads frequently to invalid results in terms of abnormal fracture appearance and inverse fracture occurrence. It is still not clear if this behavior is only owed to a testing effect, which material characteristics cause it and how far it reflects the full-scale behavior. Similar observations were made for the West-Jefferson tests, which could not be assessed in the standard manner either. Again, the question was towards testing effects and the behavior of the pipeline transporting gaseous media remains unanswered. Therefore, this paper aims at identifying open questions on basis of a literature study and own experimental results and showing possible ways forward in demonstrating safety in design against propagating fracture.
The safety assessment of flawed pressurized pipes requires the knowledge of toughness properties which are usually provided in terms of impact energy from standard full-sized CVN notch specimens. For pipes with wall thickness less than 10mm different Charpy standards allow for the application of sub-sized specimens. However, it is still not fully clear how the impact energy from sub-sized specimens can be used to evaluate the fracture resistance of the pipes and how this energy correlates to the one from the full-sized specimen. Although different empirical correlations between sub-sized and full-sized specimens exist in the literature their validity is questionable since they are based on the results for older generation of steels. In the recent years the application of damage mechanics models has been promoted to assess the fracture behavior and deformation capacity of pipelines. The main advantage of these models can be found in their capability to link the damage evolution and the underlying stress/strain condition.
In this paper damage mechanics approach is applied to describe fracture behavior of X65 pipeline material. Within the damage mechanics approach, Gurson-Tvergaard-Needleman (GTN) model is considered to be adequate for the simulation of ductile fracture. For brittle fracture, GTN model is extended by a propagation criterion which examines if the cleavage fracture stress is reached by the maximal principal stresses. The model parameters are calibrated and verified by means of load-displacement curves obtained from instrumented impact tests on different sized CVN specimens. This damage model is subsequently employed to simulate ductile-brittle transition behavior.
Challenges in fluid-structure modeling of crack propagation and arrest in modern steel pipelines
(2017)
Assessment of collapse resistance of UOE pipes – comparison of full-scale and ring collapse tests
(2014)
HE MODERN LONGITUDINALLY WELDED pipes with new generation of steel materials exhibit excellent mechanical properties due to the continuous improvements in thermomechanical controlled processing of plates (TMCP) and pipe (UOE) production processes. While the adjustment of process parameters allows for optimized design of microstructure, safe installation and operation of these pipes for long distance, gas transmission pipelines require a detailed knowledge and characterization of their deformation and fracture performance for specific application. Although the influence of texture on the material properties can be qualitatively estimated, a quantitative link between the microstructural constituents and mechanical behavior is still missing.
This paper aims to present the procedure for the development of microstructure-based model to quantitatively describe the mechanical behavior of bainitic X80 pipeline steel. In the first step, the metallographic analysis is conducted to identify the microstructural characteristics, such as volume fractions of microstructure constituents (granular and lower bainite, M-A phase) and their distributions. The strength properties in terms of flow curves are determined by tensile tests on mini-flat and round bar specimens with different sizes. Subsequently, a 2D three-phase model is developed based on the results from the quantitative analyses of microstructure with each phase modeled using the von-Mises plasticity theory. The flow curves of single phases are estimated by considering experimental findings, the chemical composition and microstructural description of each phase. This 2D FE model is then applied to predict ielding and hardening behavior. In addition to the 2D three-phase model, a 3D two-phase model is developed for the purposes of exploring the viability of using a spectral solver to analyze X80 synthetic microstructures. Here, the FFT-based approach is compared against the crystal-plastic finite-element method.
The results contribute to a better understanding of the mechanical behavior and allow a more precise microstructure design of the bainitic steels.
The present paper deals with the influence of heat affected zone (henceforth HAZ) on the fracture performance of longitudinal welded linepipes in dependence on constraint level. It has been shown that toughness values of HAZ obtained from standard fracture mechanics tests lead to uneconomic linepipe design for two reasons. The first reason is that laboratory specimens with higher constraint level generally exhibit lower fracture resistance compared to flawed linepipes. The second one has to do with a higher probability of cleavage failure occurrence in the laboratory specimen than in the linepipes due to larger areas of lower toughness (so called local brittle zones (LBZ)) intersected by crack front. In recent years numerous studies have been initiated with the objective to quantify the constraint level and thus to allow for less conservative linepipe safety assessment by applying constraint corrected toughness values. However, the main focus of these studies has hitherto been on the homogeneous materials, failing to account for the possible effects of different microstructures within the heterogeneous HAZ. This paper seeks to close this gap by reporting on results from tests on fracture mechanics specimens of a high strength X80 steel, i.e. SENB and SENT specimens as well as results from ring expansion tests. Both, deep and shallow cracks are inserted in the fracture mechanics specimens and rings targeting the fusion line (FL). By varying the initial crack size and sample type, different constraint levels are achieved and subsequently quantified using numerical methods. Besides constraint observations, post metallographic analyses are performed to identify exact HAZ microstructure involved at the crack tip. Finally, the influence of HAZ properties, flaw size and geometry on the failure behaviour of the linepipes has been demonstrated and assessed. Based on the combination of the results from constraint studies and the post metallographic analyses, the methodology is proposed which enables simple quantitative prediction of toughness values for safe and economic design of linepipes with flaws located in HAZ.
Analysis of dynamic ductile fracture propagation in pipeline steels: a damage-T IS A WELL-ESTABLISHED fact that the successful application of new generation of high-strength steel grades for long-distance gas transmission depends strongly on full understanding and appropriate characterization of fracture resistance. A damage mechanics approach has found to be a very promising tool in supporting the experimental characterization of ductile fracture propagation. The major advantage of this approach lies in the consideration of the influence of local stress and strain variables on the damage evolution and thus its capability to describe the fracture resistance of the pipelines with different stress triaxiality level by using the same set of parameters. However, the wider application of this approach has been limited due to the issues such as reliable determination of input parameters and required material properties, mesh size dependence, etc..
The objective of this paper is to characterize dynamic ductile fracture resistance of X65 and X80 pipeline materials and to demonstrate the potential of damage mechanics approach for the simulation of dynamic fracture propagation by using two damage models: (1) Cohesive Zone (CZ) model and (2) Gurson-Tvergaard-Needleman (GTN) model. In the first step, results from quasi-static and dynamic tensile tests are used to describe plasticity in terms of flow curves. The calibration of input parameters for both models is performed by using the load-deformation curves from quasi-static tests on non-standard drop-weight tear (DWT) specimens with pre-fatigued crack. b. In the next step, estimated damage model parameters are verified by means of the dynamic tests on the pressed and Chevron notch DWT specimens. Different amounts of crack growth are established by varying the drop height. The experimental fracture resistance is quantified in terms of J-integral at specific crack length. The numerical results are evaluated with respect to global load-deformation and fracture resistance behavior. Furthermore, damage simulations are applied for quantification of local stress conditions in order to identify the major factors controlling the crack propagation. The results reported here serve as a basis for better understanding of fracture performance in dependences of geometry and material properties.
Fracture propagation control in gas transmission gas pipelines belongs to the major design requirements for safe operation at high internal pressures. However, the current tests such as Drop-Weight-Tear Test (DWTT) and full-scale West-Jefferson (WJ) test reach the limits of their applicability with respect to transition temperature evaluation for seamless quenched and tempered small diameter pipes reflecting nowadays alloying concepts related to mechanical properties. Hereby, different geometry and material effects are evident which might lead to misinterpretation and unreliability of testing results. This paper aims to discuss open issues addressed in the literature and in own experimental findings with respect to reliability and transferability of testing methods, fracture parameters and their representativeness of seamless quenched and tempered pipeline behavior. By applying damage mechanics approach, it is possible to quantify the prevailing stress state and thus to understand the mechanisms controlling specific fracture appearance (ductile or brittle). Furthermore, studies were performed with objective to quantify the effect of different parameters (geometry, material and loading) on the fracture performance of the pipeline. The results from these investigations will serve as a basis for a safe pipeline design against propagating fracture.
The performance of engineering design of high-strength steel pipelines has revealed the necessity to revise current design procedures. Therefore, an improved and detailed comprehension of fracture mechanisms and development of failure prediction tools are required in order to derive new design criteria. In last decades the most successful failure prediction tools for steel structures subjected to various type of loading can be encountered in the field of damage mechanics. This paper aims to describe ductile fracture behavior of high-strength steel pipelines by applying three different damage models, Gurson-Tvergaard-Needelman (GTN), Fracture Locus Curve (FLC) and Cohesive Zone (CZ). These models are evaluated regarding their capability to estimate ductile crack propagation in laboratory specimens and linepipe components without adjusting the calibrated parameters. It can be shown that appropriate parameter sets can be identified to reproduce load-deformation and fracture resistance curves accurately. The strain rate effect on the fracture behavior is examined by dynamic tests on the BDWT specimens. Finally, the shortcomings of the applied models are pointed out with the reference to possible extensions and modifications.
The Park–Paulino–Roesler (PPR) potential-based model is a cohesive constitutive model formulated to be consistent under a high degree of mode-mixity. Herein, the PPR’s generalization to three-dimensions is detailed, its implementation in a finite element framework is discussed, and its use in single-core and high performance computing (HPC) applications is demonstrated. The PPR model is shown to be an effective constitutive model to account for crack nucleation and propagation in a variety of applications including adhesives, composites, linepipe steel, and microstructures.
Fracture behavior of seamless pipeline material X65Q acc. to API 5L has been studied both experimentally and numerically at different loading conditions (quasi-static vs. dynamic) and temperatures. The recent findings have shown difficulties in applying well established methods for determination of transition behavior or prediction of ductile crack arrest for the new generation of high-toughness steels. The irregular fracture performance (e.g. so-called "abnormal inverse fracture" appearance, significant scattering in ductile-to-brittle-transition-temperature region, etc.) suggests that the influence of pipe dimensions, loading parameters, crack initiation resistance as well as testing procedure on the fracture behavior has been neither understood nor properly described. This work aims to shed light on these questions regarding the applicability of conventional methods and to better illuminate most relevant parameters affecting fracture behavior of high toughness steels. To achieve this goal, experimental data basis for analysis of fracture behavior in transition and upper shelf regime has been established by conducting quasi-static fracture mechanics tests and dynamic tests on Battelle Drop Weight Tear (BDWT or DWT) specimens at different temperatures. The evaluation of obtained test results in upper shelf has been additionally complemented by numerical simulation of damage behavior. The results highlight the influence of stress conditions on fracture behavior with reference to pipe dimensions and loading conditions and, subsequently, may be used as a basis for revision of existing design methods.
Experiments and fracture modeling of high-strength pipelines for high and low stress triaxiality
(2012)
This paper provides results from a comprehensive study on mechanical characterization of high-strength pipeline steel, grade X100 using experimental and numerical methods. The material was characterized for anisotropic plasticity, fracture initiation for various states of stress, (pre-cracked) fracture toughness and uncracked ductility. The experimental program included tests on flat butterfly-shaped, central hole, notched and circular disk specimens for low stress triaxiality levels; as well as tests on round notched bar specimens and SENT fracture mechanics tests, for high values of stress triaxiality. This program covered a wide range of stress conditions and demonstrated its effect on the material resistance. Parallel to the experimental study, detailed numerical investigations were carried out to simulate all different experimental tests. Using an inverse method, a 3-parameter calibration was performed on the Modified Mohr-Coulomb (MMC) fracture model. Subsequently, the predictive capabilities of the MMC were evaluated by the comparison to the fracture toughness tests results, used extensively in the pipeline industry. The capabilities of the MIT fracture model have been demonstrated on an example of high strength offshore steel, X100. The outcome of this study was not only to provide, the overall characterization of the fracture behavior of this material as an example, but also to present the methodology on how to use the MMC model as a practical tool in pipeline design.
This paper focuses on the characterization of the fracture performance of X100 material in transition temperature region using both experimental and numerical methods. The ductile fracture has been analyzed using tests on round notched bar specimens and standard fracture mechanics tests performed at room temperature. In previous publications the damage model Gurson-Tvergaard-Needleman (GTN) has been applied and verified by existing experimental data to describe ductile fracture behavior. The brittle fracture and the fracture in temperature transition region have been studied by means of deep and shallow notched SENB specimens at two different temperatures T=- 80°C and -40°C. Besides elastic-plastic analyses to quantify constraint levels for different initial crack configurations at the onset of cleavage fracture, the brittle failure has been described using modified Beremin model. The influence of the stable crack growth on the cleavage failure probability in temperature transition region has been captured by coupling the ductile fracture model (GTN) with the modified Beremin model. Finally, examples have been presented for the practical application of the numerical results on the fracture assessment of the flawed high-strength pipelines.