Refine
Year of publication
- 2013 (6) (remove)
Document Type
- conference proceeding (article) (4)
- Article (1)
- Part of a Book (1)
Has Fulltext
- no (6)
Is part of the Bibliography
- no (6)
Keywords
- Cathodes (1)
- Gallium nitride (1)
- Iron (1)
- Light emitting diodes (1)
- Photonics (1)
- Surface texture (1)
- Surface waves (1)
Institute
Advanced Si-based semiconductor technology is most suitable to fabricate uniform nanostructures as integrated field emitter arrays for novel vacuum electronic devices. In order to improve the field emission homogeneity and stability of p-type silicon tip arrays for pulsed sensor applications, the authors have systematically studied the influence of the fabrication parameters on the tip shape and on the specific operating conditions. Based on detailed design calculations of the field enhancement, they have fabricated two series of hexagonal arrays of B-doped Si-tips in a triangular arrangement. The first (second) type contains three (four) patches with different number of tips (1, 91, 547 and 1, 19, 1027, 4447 for the first and second type, respectively) of about 1 (2.5) μm height, ∼20 (20) nm apex radius, and 20 (10) μm pitch. The field emission properties of both individual tips and complete arrays were investigated with a field emission scanning microscope at a pressure of 10−9 mbar. The current plateau of these tips typically occurs at about 10 (3) nA and around 65 (25) V/μm field level. In this carrier saturation range, single tips provide the highest current stability (<5%) and optical current switching ratio (∼2.5). Fairly homogeneous emission of the tip arrays leads to an undershooting of the expected linear scaling of the mean plateau current as well as to a much improved current stability (<1%).
The performance of free electron lasers depends on the brilliance of the electron source. Nowadays photo-cathodes (e.g. Cs2Te) are used despite of their high emittance. To develop robust and more brilliant cathodes we have built up an UHV system which enables systematic photoemission (PE) measurements with a tunable pulsed laser (hv) at high electric fields (E). First results on Au and Ag crystals revealed only low quantum efficiency (QE) due to fast electron relaxation. Hence, we have started QE(hv,E) investigations on n- and p-Si wafers. Resonant PE was observed above as well as below the work function O, which can be assigned to optical transitions in the electronic band structure or explained by thermally excited states at the bottom of the conduction band. As expected, only low QE values were achieved even for n-Si probably due to surface oxide. Moreover, a significant rise of the QE peaks above O were obtained for n-Si at E >8 MV/m but limited by the occurrence of parasitic field emission from dust particles.
We report on the field emission properties of GaN LED surfaces. The textured extraction facet acts both as light scattering layer in order to increase the light extraction efficiency of the LED as well as nanostructured cathode surface for the field emission (FE) of electrons. The LED emits blue light with a peak wavelength of around 450 nm. The FE properties were investigated by a scanning microscope. Integral measurements as well as regulated voltage scans for 1 nA FE current over an area of 400 * 400 µm2were used to investigate both overall and local FE properties. A high number of well-distributed emitters with an average field enhancement factor ß of 85 and stable integral emission currents up to 100 µA at an electric field of 80 V/µm (Øanode= 880 µm) were found. Photo-field-emission spectroscopy (PFES) using a tunable pulsed laser revealed an enhanced photo absorption of the InGaN/GaN quantum well structures near the emission wavelength of the LED (<3.5 eV), whereas at high photon energies (>4.1 eV) photoemission from the GaN surface was observed.
Feldemissionselektronenquellen sind aufgrund ihrer prinzipiellen Vorteile gegenüber Glühkathoden bereits seit längerer Zeit Gegenstand der Forschung und werden bisher nur in einigen Spezialanwendungen erfolgreich eingesetzt. Hierbei werden Einzelspitzen mit Spannungen im kV-Bereich und Strömen im nA-Bereich betrieben. Dagegen werden für miniaturisierte Sensorsysteme eher Spannungen von ca. 100 V und Ströme von ca. 1 mA benötigt. Dazu wurden bisher meist Feldemissionskathoden mit CNTs vorgeschlagen, welche für Anwendungen in der Halbleiterindustrie aufgrund des Kohlenstoffanteils nicht erwünscht sind. Ziel unserer Arbeit ist es, Si-basierte Elektronenquellen zu realisieren, die mit anderen miniaturisierten Vakuumsensoren auf einem Chip integrierbar sind. Mithilfe eines optimierten Herstellungsprozesses konnten wir p-Si-Spitzenarrays mit Spitzenradien von wenigen nm realisieren [1]. Messungen an diesen Strukturen zeigen ein sehr homogenes Emissionsverhalten, das vor allem im Sättigungsbereich bei Emissionsströmen von ca. 10 nA pro Spitze zeitlich stabil (Schwankungen < 5 %) und optisch schaltbar (Faktor > 2.5) ist [2].