Refine
Year of publication
- 2018 (9) (remove)
Document Type
- Article (9)
Language
- English (9)
Has Fulltext
- no (9)
Is part of the Bibliography
- no (9)
Keywords
- additive manufacturing (2)
- FLM-Printing (1)
- Laser assisted processes (1)
- Optical properties (1)
- PA12 (1)
- Polymers (1)
- Preheating (1)
- injection molding (1)
- laser absorption (1)
- laser additive manufacturing (1)
Institute
Begutachtungsstatus
- peer-reviewed (9) (remove)
Due to the growing number of applications for Additive Manufacturing (AM), an increasing need for enhanced quality control methods exists. Here optical measurement techniques are often used for in-situ monitoring in AM. There is a great potential to standardize and improve applications of optical measurement devices in accordance to the increasing requirements of measuring tasks. Beside the optical material qualifications, especially process-oriented changes in optical effects are of great relevance for in-situ evaluations. The optical modifications may be attributed to aggregate specific phase transitions coming along with variable emitted wavelengths. A measuring setup with two integrations spheres and a heated process chamber have been developed to analyze the optical interactions of laser radiation and visual illumination with the powder. The process oriented analysis for selective laser sintering lead to improved operating conditions in the field of in-situ measurements in combination with an accurate evaluation of the absorption ratio of the examined powder.
The mechanical properties of polymer parts built by Selective Laser Sintering are strongly related to the internal microstructure which differs with the applied production parameters. The paper focuses on the back tracing of the pore morphology of laser sintered polyamide-12 samples to the process parameters. Therefore, a data base is used which is supplied by a Round Robin initiative and includes mechanical tensile tests and the microstructural analysis of the pore morphology of several different sample charges built with different machines. The pore morphologies (porosity, pore density, pore shape and pore arrangement) measured by X-ray computed tomography are compared and discussed regarding the employed parameters and the resulting mechanical properties. The investigations point out that pore density is a superior indicator than porosity for mechanical issues. This is especially valid along the build direction since pore morphology has shown to be strongly anisotropic. Moreover, the analysis revealed that pore density is strongly affected by the process temperature, which is proved to be essential for the fabrication of mechanical robust parts using Selective Laser Sintering.
Conventional Selective Laser Sintering of polymers is restricted to the processing of single materials. The fabrication of components consisting of different material regions is a challenge which cannot be realized by standard coating devices basing on blades or rollers. Thus, advanced coating and deposition techniques are needed which enable the precise and reliable control over very small powder quantities in order to prepare arbitrary powder patterns with high accuracy and repeatability. In this report, the delivery of polymer powder by vibrating nozzles inside laser sintering machines is investigated. Therefore, a steel nozzle attached to a piezo actuator is integrated into a machine, whereas the nozzle itself features internal channels which allow the precise control over the powder temperature using heat transfer oil. The setup is used to study the influence of different system configurations on the powder deposition characteristics as resolution and layer surface roughness. The results show that temperature influences the mass flow depending on the material used and that a precise deposition of powder pattern with microscale resolution is possible with optimized parameters. Finally, the multimaterial powder pattern is fused by a new illumination strategy of laser sintering which is called Simultaneous Intensity-Selective Laser Sintering in order to demonstrate the potential of this new approach.
In order to understand the absorption characteristic, a ray trace model is developed by taking into account the reflection, absorption and refraction. The ray paths are resolved on a sub-powder grid. For validation, the simulation results are compared to analytic solutions of the irradiation of the laser beam onto a plain surface. In addition, the absorptance, reflectance and transmittance of PA12 powder layers measured by an integration sphere setup are compared with the numerical results of our model. It is shown that the effective penetration depth can be lower than the penetration depth in bulk material for polymer powders and, therefore, can increase the energy density at the powder bed surface. The implications for modeling of the selective laser sintering (SLS) process and the processability of fine powder distributions and high powder bed densities are discussed.
In this paper, the use of electrophotographic polymer powder transfer for the preparation of multi-material layers is discussed with respect to the application in powder bed-based additive manufacturing technologies as selective laser sintering (SLS). Therefore, the challenges of this task are considered verifying the critical process steps in order to develop a concept for an electrophotograhic laser sintering machine. On that basis, an experimental setup with a two-chamber design is realized which enables the investigation of the electrophotographic powder transfer at typical process conditions of SLS. Using this setup, transfer tests of polypropylene powder patterns were performed and qualitatively analyzed by photographic imaging. The results confirm the high potential of the application of electrophotography for multi-material powder deposition and show how a residual electrophotographic powder deposition can be achieved in general, which is independent from the already produced part height, in order to build up three-dimensional multi-material components.
Comparison between the optical properties of injection molded and additive manufactured components
(2018)
Fused Layer Manufacturing (FLM) is an additive technology based on polymer material extrusion. Due to variations in temperature during the manufacturing process and the resulting stress between the stacked layers, the final parts show anisotropic mechanical properties. One possible approach for their reduction is the immediate local preheating of the surface via laser radiation. At first, our research examines the influence of laser parameters as wavelength, power, velocity and area of impact for the preheating of the surface. In addition, an overview of possible parameter combinations is given based on the selection of raw materials, its colors, thicknesses and the manufacturing process. Initially, the absorption level of the materials regarding the emitted wavelength is detected using a spectrophotometer. Subsequently, preheating tests are conducted with different laser types while the temperature is determined by a thermal camera. The selected laser type is planned to get mounted on a prototype-machine for further in-situ preheating experiments on FLM parts during the manufacturing process.
Laser transmission welding is a well-known joining technology for welding thermoplastics. Although the process is already used industrially, fundamental process-structure-property relationships are not fully understood and are therefore the subject of current research. One aspect of these mentioned process-structure-property relationships is the interaction between the temperature field during the welding process, the weld seam morphology of semi-crystalline thermoplastics, and the weld seam strength. In this study, the influence of the line energy on the weld seam morphology of polypropylenes is analyzed. For this purpose, the size of spherulites in the weld seam is investigated, as well as different occurring phases of polypropylene (a- and b-phase). It is shown that both the spherulite size of the a-phase and the amount of b-phase increase with increasing line energy. For the explanation and discussion of the results, a temperature-dependent thermal simulation model is used to derive characteristic attributes of the temperature field (maximum temperatures, cooling rates, temperature gradients).
Laser transmission welding is a non-contact and efficient process technology for joining thermoplastic polymers. In the conventional process, laser sources in the wavelength range of 1 μm are usually used. Therefore, most of the laser radiation is transmitted through the upper joining partner and absorbed only in the lower joining partner. As a result, the possibilities to influence the temperature field especially in the upper joining partner are limited. To overcome these limitations, an additional thulium fiber-laser with a wavelength of 1.94 μm is used in this study and coaxially aligned with a diode laser. The use of an additional thulium fiber-laser leads to a significant absorption in the upper joining partner. Through this approach, it is shown that the temperature field and the weld seam geometry can be influenced by using these two different discrete laser wavelengths. Depending on the intensity distribution of both lasers, an increase of the size of the heat affected zone in the upper joining partner can be observed. In order to develop a better process understanding, a thermal finite element model is built up and verified by comparing the calculated size of the heat affected zone for different process parameters with the experimental data. The model is able to represent the influence of both laser sources on the temperature field and is used to calculate characteristics of the temperature field, such as maximum temperatures or cooling rates. The characteristics are then used to explain the weld seam morphology, such as occurrence and size of spherulitic structures in the weld seam.
A new approach to coat PA12 powders with laser-generated nanoparticles for selective laser sintering
(2018)
The modification of selective laser sintering (SLS) powder materials by nanoadditives offers the possibility to adapt the powder properties to the laser sintering process or the resulting part properties. To avoid agglomeration of the nanofiller, a new approach in which surfactant-free laser-generated colloidal nanoparticles are adsorbed onto the polymer surface directly in an aqueous solution is demonstrated. Based on this novel approach, polyamide 12 (PA12) powders are decorated with metal and oxide nanoparticles and processed via SLS. Electron microscopy and confocal laser scanning imaging are utilized to analyze the dispersion of the filler.