Refine
Year of publication
Document Type
Is part of the Bibliography
- no (82)
Keywords
- magnetoactive elastomer (9)
- magnetoactive elastomers (7)
- magnetostriction (7)
- BEHAVIOR (6)
- hysteresis (6)
- magnetoelectric effect (6)
- magnetorheological elastomer (6)
- MICROSTRUCTURE (5)
- composites (5)
- Garnet films (3)
Institute
- Fakultät Elektro- und Informationstechnik (81)
- Labor Intelligente Materialien und Strukturen (81)
- Mechatronics Research Unit (MRU) (8)
- Fakultät Angewandte Natur- und Kulturwissenschaften (1)
- Fakultät Informatik und Mathematik (1)
- Labor Faserverbundtechnik (LFT) (1)
- Labor Informationssicherheit und Complience (ISC) (1)
- Labor Mikrosensorik (1)
- Labor Optische Übertragungssysteme (1)
- Labor Smart Embedded Systems (1)
Begutachtungsstatus
- peer-reviewed (82) (remove)
Significant deformations of bodies made from compliant magnetoactive elastomers (MAE) in magnetic fields make these materials promising for applications in magnetically controlled actuators for soft robotics. Reported experimental research in this context was devoted to the behaviour in the quasi-static magnetic field, but the transient dynamics are of great practical importance. This paper presents an experimental study of the transient response of apparent longitudinal and transverse strains of a family of isotropic and anisotropic MAE cylinders with six different aspect ratios in time-varying uniform magnetic fields. The time dependence of the magnetic field has a trapezoidal form, where the rate of both legs is varied between 52 and 757 kA/(s·m) and the maximum magnetic field takes three values between 153 and 505 kA/m. It is proposed to introduce four characteristic times: two for the delay of the transient response during increasing and decreasing magnetic field, as well as two for rise and fall times. To facilitate the comparison between different magnetic field rates, these characteristic times are further normalized on the rise time of the magnetic field ramp. The dependence of the normalized characteristic times on the aspect ratio, the magnetic field slew rate, maximum magnetic field values, initial internal structure (isotropic versus anisotropic specimens) and weight fraction of the soft-magnetic filler are obtained and discussed in detail. The normalized magnetostrictive hysteresis loop is introduced, and used to explain why the normalized delay times vary with changing experimental parameters.
Commercially available contact angle (CA) measuring devices usually do not allow for the application of magnetic fields to the sample under test. A setup for measuring the CA of liquids on magnetosensitive surfaces has been developed specifically for investigating the surfaces of magnetoactive elastomers (MAEs). The addition of a programmable linear stage, which moves a permanent magnet, allows for fine control of the magnetic field applied to the MAE without the need for large and power-consuming electromagnets. Paired with a custom control and evaluation software, this measurement setup operates semiautomatically, limiting operator error and increasing precision, speed, as well as repeatability of static and dynamic CA measurements for different magnetoactive materials. The software is equipped with robust droplet fitting algorithms to avoid experimental challenges arising with soft magnetoactive materials, such as the curling of sample edges or diffuse non-reflective surfaces. Several application examples on MAE surfaces, both processed and unprocessed, are presented.
In a three-guide coupler with multimode central waveguide, more than two modes of the entire structure participate in the coupling between the outer waveguides. Using a three-mode approximation we found simple conditions for complete power transfer between the outer waveguides: the device length has to match certain multiples of the con- ventionally defined coupling length. The specific form of the relevant modes allows us to design a magneto-optic isolator or circulator with significantly reduced device length (as compared to the conventional nonreciprocal coupler). The performance of the proposed devices is simulated by propagating-mode calculations. Estimates for admissible fabrication tolerances for the layer thicknesses are presented.
Each particular implementation of the beam propagation method (BPM) requires a special procedure allowing for radiation to leave the computational window. We propose a new approach to constructing the finite difference schemes of the BPM at the boundary of the computational window. These schemes are independent of the computed fields and allow for a similar treatment of both interior and boundary points. The new approach can be further improved by correcting the field values at the boundary points according to Hadley's method. The algorithm is easy to implement for both two- and three-dimensional structures. The new method considerably reduces computation times because the propagation matrices remain constant in longitudinally invariant sections, thus avoiding repeated LU-decompositions. The basic idea-establishing the finite difference scheme such that locally exact, approximate, or plausible solutions are recovered-may be of interest for other efforts to solve partial differential equations by the finite difference method.
Effective coupling between two remote optical waveguides without branching sections can be achieved in a three-guide system with multimode central waveguide. We investigate the nonlinear power switching of c.w. laser radiation by such radiatively coupled waveguides. It is shown that effective all-optical switches with spatially well separated input/output channels can be realized although the influence of multimode interference on the switching characteristics becomes more pronounced for increasing thickness of the central guide. Different coupling regimes are specified, and the changes in switching characteristics during the transformation from one regime to another is studied. Numerical calculations for the critical power are compared with an approximate analytical expression. It is also shown that, at a moderate input power, a small number of modes determines the switching behavior.
Efficient transportation of droplets (∽10 ¹ ̶̶̶̶ 10 ² µl) and small solid objects (∽10 ¹ ̶ 10 ² mm ³ ) have important applications in many fields, such as microfluidics, lab‐on‐a‐chip devices, drug delivery, etc. A novel multifunctional surface consisting of a periodic array of micro‐lamellae from a soft magnetoactive elastomer (MAE) on a plastic substrate is reported for these purposes. The physical origin of the propulsion is the bending of soft magnetic lamellae in non‐uniform magnetic fields, which is also observed in uniform magnetic fields. The magnetoactive surface is fabricated using a facile and rapid method of laser ablation. The propulsion of items is realized using a four‐pole rotating magnet. This results in a cyclic lamellar fringe motion over the micro‐structured surface and brings an advantage of easy reciprocation of transport by rotation reversal. Two modes of object transportation are identified: “pushing” mode for precise control of droplet and solid positioning and “bouncing” mode for heavier solid objects transportation. A water droplet of 5 μl or a glass sphere with a 2.1 mm diameter can be moved at a maximum speed of 60 mm s ⁻¹ . The multifunctionality of the proposed mechatronic platform is demonstrated on the examples of selective solid‐liquid separation and droplet merging.
It is shown that the advancing (ACA) and receding (RCA) contact angles of water on extremely soft (shear modulus of the order of 10 kPa) magnetoactive elastomer (MAE) films significantly depend on the applied magnetic field. The difference between these angles, known as the contact angle hysteresis, is examined. The roles of the filler concentration and material softness are elaborated. The highest change in the contact angle hysteresis (CAH) from 34° in the absence of magnetic field to 76° in a magnetic field of 0.4 T is achieved for the softest sample with the lowest mass fraction of iron particles (70 wt%). The dependence of the CAH on magnetization history (“magnetic hysteresis”) is observed. This magnetic hysteresis is clearly pronounced for the ACA and has little effect on the RCA. Magnetic field-induced changes of the surface roughness exhibit qualitatively the same hysteresis behavior with regard to the external magnetic field as the ACA. The results are promising for the development of smart surfaces for applications where the dynamic wetting has to be controlled.
An effective method for on-demand control over the impact dynamics of droplets on a magnetoresponsive surface is reported. The surface is comprised of micrometer-sized lamellas from a magnetoactive elastomer on a copper substrate. The surface itself is fabricated using laser micromachining. The orientation of the lamellae is switched from edge-on (orthogonal to the surface) to face-on (parallel to the surface) by changing the direction of a moderate (<250 mT) magnetic field. This simple actuation technique can significantly change the critical velocities of droplet rebound, deposition, and splashing. Rebound and deposition regimes can be switched up to Weber number We < 13 ± 3, while deposition and splashing can be switched in the range of 32 < We < 52. Because a permanent magnet is used, no permanent power supply is required for maintaining the particular regime of droplet impact. The presented technology is highly flexible and enables selective fabrication and actuation of microstructures on complex devices. It has great potential for applications in soft robotics, microfluidics, and advanced thermal management.
Magnetoactive elastomers (MAEs) are promising materials for realization of magnetic field-controlled soft actuators. Herein, a systematic investigation of magnetic field-induced macroscopic deformations of soft MAE cylinders with a diameter of 15 mm in uniform quasi-static magnetic fields directed parallel to the cylinder’s axis is reported. The measurements were based on image processing. Thirty-six MAE samples differing in the weight fraction of the iron filler (70 wt%, 75 wt% and 80 wt%), alignment of filling particles, and the aspect ratio (0.2, 0.4, 0.6, 0.8, 1.0 and 1.2) were fabricated. MAE cylinders exhibited high relative change in height (up to 35% in the field of 485 kA/m) and lateral contraction. The dependence of the maximum extensional strain on the aspect ratio was obtained and compared with theoretical considerations. A concave dent was formed on the free circular base in magnetic fields. This concavity was characterized experimentally. A significant volumetric strain of the order of magnitude of 10% was calculated in MAEs for the first time. In consequently repeated magnetization cycles, the remanent extensional strain significantly increased after each cycle. The results are qualitatively discussed in the framework of the modern views on the magnetically induced macroscopic deformations of MAEs. The directions of further research are outlined.
Stimuli responsive materials are key ingredients for any application that requires dynamically tunable or on-demand responses. In this work we report experimental and theoretical investigation of magnetic-field driven modifications of soft-magnetic elastomers whose surface was processed by laser ablation into lamellar microstructures that can be manipulated by a uniform magnetic field. We present a minimal hybrid model that elucidates the associated deflection process of the lamellae and explains the lamellar structure frustration in terms of dipolar magnetic forces arising from the neighbouring lamellae. We experimentally determine the magnitude of the deflection as a function of magnetic flux density and explore the dynamic response of lamellae to fast changes in a magnetic field. A relationship between the deflection of lamellae and modifications of the optical reflectance of the lamellar structures is resolved.