• Treffer 71 von 74
Zurück zur Trefferliste

Laser Micromachining of Magnetoactive Elastomers as Enabling Technology for Magnetoresponsive Surfaces

  • A simple method for structuring of the surface of a magnetoactive elastomer (MAE) on the tens of micrometers scale, which capabilities extend beyond conventional mold-based polymer casting, is reported. The method relies on the ablation of the material by absorption of nanosecond infrared pulses from a commercial laser. It is shown that it is possible to fabricate parallel lamellar structures with a high aspect ratio (up to 6:1) as well as structures with complex scanning trajectories. The method is fast (fabrication time for the 7 × 7 mm2 is about 60 s), and the results are highly reproducible. To illustrate the capabilities of the fabrication method, both orthogonal to the MAE surface and tilted lamellar structures are fabricated. These magnetosensitive lamellae can be easily bent by ±45° using an external magnetic field of about 230 mT. It is demonstrated that this bending allows one to control the sliding angle of water droplets in a great range between a sticky (>90°) and a sliding state (<20°). Perspectives on employing this fabrication technology for magnetosensitive smart surfaces in microfluidic devices and soft robotics are discussed.

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar Anzahl der Zugriffe auf dieses Dokument
Metadaten
Verfasserangaben:Gaia Kravanja, Inna A. Belyaeva, Luka Hribar, Irena Drevenšek-OlenikORCiD, Mikhail Shamonin (Chamonine)ORCiDGND, Matija Jezeršek
DOI:https://doi.org/10.1002/admt.202101045
Titel des übergeordneten Werkes (Englisch):Advanced Materials Technologies
Verlag:Wiley
Dokumentart:Artikel aus einer Zeitschrift/Zeitung
Sprache der Veröffentlichung:Englisch
Jahr der Veröffentlichung:2021
Datum der Freischaltung:27.01.2022
Jahrgang:7
Ausgabe / Heft:5
Aufsatznummer:2101045
Erste Seite:1
Letzte Seite:8
Fakultäten / Institute / Einrichtungen:Fakultät Elektro- und Informationstechnik
Fakultät Elektro- und Informationstechnik / Labor Intelligente Materialien und Strukturen
Begutachtungsstatus:peer-reviewed
Forschungsschwerpunkt:Produktion und Systeme
OpenAccess Publikationsweg:Hybrid Open Access - OA-Veröffentlichung in einer Subskriptionszeitschrift/-medium
Lizenz (Deutsch):Creative Commons - CC BY-NC-SA - Namensnennung - Nicht kommerziell - Weitergabe unter gleichen Bedingungen 4.0 International