- Networked control systems as e.g., battery management systems, smart grids or vehicular systems, consist of sensors, actuators and controllers with a communication network in the control loop. The data rate and the reliability of the underlying communication network are key factors since delays or message losses directly affect the system control. In addition, the processor load caused by the communication is significant as it influences the calculation of system states and the setting of control parameters. The power consumption of the communication network has a further impact on the energy efficiency of the respective application. In this paper, the communication technologies Controller Area Network (CAN), Controller Area Network Flexible Data-rate (CAN FD) and Ethernet are compared in the context of networked control systems with focus on a decentralized battery management system. First, the message processing time and the processor load are measured. With regard to energy efficiency, the maximum power consumption is determined. The Bit Error Rates (BER) and the Residual Error Rates (RER) are calculated to evaluate the reliability. Finally, the receive FIFO load under high traffic conditions is examined. Index Terms—Networked control systems, decentralized battery management system, microcontrollers, communication systems, Ethernet, Controller Area Network (CAN), Controller Area Network Flexible Data-rate (CAN FD) energy efficiency, energy consumption, bit error rate, residual error rate, processor load.