Influence of temperature gradients on the part properties for the simultaneous laser beam melting of polymers
- By Laser Beam Melting of polymers (LBM), parts with almost any geometry can be built directly out of CAD files without the need for additional tools. Thus, prototypes or parts in small series production can be generated within short times. Up to now, no multi-material parts have been built by LBM, which is a major limitation of the technology. To realize multi-material parts, new mechanisms for depositing different polymer powders as well as a new irradiation strategy are needed, by which polymers with different melting temperatures can be warmed to their specific preheating temperatures and be molten simultaneously. This is achieved by simultaneous laser beam melting (SLBM). In the process, two different materials are deposited next to each other and preheated a few degrees below their melting temperatures by infrared emitters and laser radiation (λ = 10.60 µm), before in the last step the two preheated powders are molten simultaneously by an additional laser (λ = 1.94 µm). So far, multi-material tensile bars have been realized and analyzed regarding their boundary zone between both materials. The experiments showed that the temperature gradients in the boundary zone and along the building direction seem to be of great importance for the process stability and the resulting part properties. Therefore, a detailed analysis of the occurring temperature gradients during the process is needed to identify adequate process adjustments regarding the temperature controlling. To analyze the temperature gradients, thermocouples positioned inside the powder bed are used. By varying the temperature of the building platform, the influence of different temperature gradients on the resulting part properties is shown.
Author: | Tobias LaumerORCiDGND, Michael Schmidt, Thomas Stichel |
---|---|
URL / DOI: | https://www.wlt.de/lim/Proceedings/Stick/PDF/Contribution241_final.pdf |
Parent Title (English): | Proceedings of Laser in Manfacturing Conference 2015, June 22 - June 25, 2015 Munich, Germany |
Document Type: | conference proceeding (article) |
Language: | English |
Year of first Publication: | 2015 |
Creating Corporation: | German Scientific Laser Society (WLT e.V.) |
Release Date: | 2022/11/25 |
Tag: | additive manufacturing; laser beam melting of polymers; multi-material parts |
Institutes: | Fakultät Maschinenbau |
Fakultät Maschinenbau / Labor Additive and Intelligent Manufacturing for Sustainability (AIMS) | |
Publication: | Externe Publikationen |
research focus: | Produktion und Systeme |
Licence (German): | Keine Lizenz - Es gilt das deutsche Urheberrecht: § 53 UrhG |