TY - CHAP A1 - Hausler, Peter A1 - Wunderlich, Lukas A1 - Fischer, Johannes A1 - Pfab, Christina A1 - Heckscher, Simon A1 - Hirsch, Thomas A1 - Bierl, Rudolf T1 - Surface plasmon resonance imaging for detection of drug metabolites in water T2 - Proceedings of SPIE, Optical Sensors 2019, 1 - 4 April 2019, Prague, Czech Republic N2 - The analysis of surface water, groundwater, drinking water as well as sewage is important to get information about the contamination of the water cycle. Currently, these time-consuming investigations require special equipment, like for example hyphenated mass spectrometry. Surface plasmon resonance (SPR) is a faster alternative as it is highly sensitive to changes in the dielectric medium next to a thin metal layer and makes it a quasi-universal detector. Therefore, and due to the labelfree nature, SPR is a widely used sensing tool for real‐time monitoring of molecular interactions of various analytes. SPR imaging (SPRi) has several advantages to standard surface plasmon resonance, as it allows to observe many analytes in parallel as well as the integration of referencing technologies. However, the homogenous illumination of a large area (several millimeters) with a small light source is challenging and demands new approaches. Allopurinol, a drug used to lower the blood concentration of urate and hence decrease the affection of gout, gets metabolized to oxipurinol in the body and dropped out almost entirely by urinary excretion. After wastewater treatment, concentrations of oxipurinol up to 21.7 μg•L-1 are detected. Further tracking of oxipurinol in the urban water cycle showed its presence in rivers and streams or even in groundwater. Therefore, the high biological stability of oxipurinol allows this molecule to be used as a marker for domestic wastewater in the environment. For the detection of oxipurinol by SPR graphene was used as receptive layer, as the analyte can bind via π-stacking to this surface. An SPRi technique was developed and compared to conventional SPR system for the detection of oxipurinol. Y1 - 2019 U6 - https://doi.org/10.1117/12.2522324 SN - 0277-786X VL - Vol. 11028 ER - TY - CHAP A1 - Hausler, Peter A1 - Roth, Carina A1 - Aumer, F. A1 - Vitzthumecker, Thomas A1 - Genslein, Christa A1 - Hirsch, Thomas A1 - Bierl, Rudolf T1 - Miniaturisiertes Sensorsystem zur Oberflächenplasmonenresonanzspektroskopie T2 - 118. Jahrestagung der deutschen Gesellschaft für angewandte Optik (DGaO), 6.-10. Juni 2017, Dresden N2 - Die Oberflächenplasmonenresonanzspektroskopie (SPR) wird aufgrund ihrer Vorzüge der zerstörungs- und markierungsfreien Messung, sowie der hohen Sensitivität sehr erfolgreich im Labormaßstab eingesetzt. Aufgrund der hohen Kosten geschieht dies bislang hauptsächlich in der Bioanalytik und dem Wirkstoffscreening. Gezeigt wird ein Ansatz, mit dem diese Technologie auf ein ultrakompaktes, kostengünstiges Sensorsystem übertragen wird, welches in der Lage ist, hoch-sensitiv Änderungen im Brechungsindex von 10-6 Einheiten (RIU) zu detektieren. Für Wasser bewirkt eine Temperaturschwankung von 1 K bereits eine Änderung von 1 mRIU. Daher wird durch ein integriertes Referenzsystem, sowie die Miniaturisierung erreicht, dass das System gegenüber Temperaturschwankungen, weitestgehend stabil ist. In dem MOEMS wird anstatt der konventionellen 1-Punkt bzw. 2-Punkt Messung ein bildgebendes Verfahren angewendet. Die Sensorfläche von 15 x 15 mm wird dabei mit einem handelsüblichen 4 Mio. Pixel CMOS Sensor ausgewertet. Um verlässliche Datenpunkte zu erhalten benötigt man eine Fläche von 10 x 10 Pixel. Demzufolge können auf dem Sensor theoretisch bis zu 40.000 Sensorspots parallel ausgewertet werden. KW - Messtechnik KW - Optische Systeme KW - Spektroskopie Y1 - 2017 ER - TY - CHAP A1 - Hausler, Peter A1 - Genslein, Christa A1 - Roth, Carina A1 - Vitzthumecker, Thomas A1 - Hirsch, Thomas A1 - Bierl, Rudolf T1 - Miniaturized Surface Plasmon Resonance based Sensor System T2 - Proceedings of the 6th International Conference on Photonics, Optics and Laser Technology - PHOTOPTICS, Funchal, Madeira, Portugal N2 - We describe the miniaturization of the Surface Plasmon Resonance (SPR) technology which mainly finds its applications in pharmaceutical screening and biotechnology so far. SPR spectroscopy is a label-free, non-destructive and highly sensitive measurement principle detecting changes in the refractive index in striking distance to a gold surface. A transfer of this technology to a miniaturized sensor will broaden the range of possible applications. A promising feature which is included in the miniaturized system is the angle-dependent recording of the SPR signals without moving parts. Commercial SPR assays are mainly working with a small number of sensing spots. In contrast, the SPR imaging system shown here will allow to use an array of many sensing spots. In combination with chemical receptors designed as an artificial nose, the simultaneous detection of many analytes is envisioned for future applications. KW - Surface Plasmon Resonance Spectroscopy KW - Sensor KW - SPR-imaging KW - Miniaturization KW - Micro-Opto-Electro-Mechanical Systems Y1 - 2018 SN - 978-989-758-286-8 U6 - https://doi.org/10.5220/0006555400630066 SP - 63 EP - 66 PB - SciTePress ER - TY - JOUR A1 - Genslein, Christa A1 - Hausler, Peter A1 - Kirchner, Eva-Maria A1 - Bierl, Rudolf A1 - Baeumner, Antje J. A1 - Hirsch, Thomas T1 - Graphene-enhanced plasmonic nanohole arrays for environmental sensing in aqueous samples JF - Beilstein Journal of Nanotechnology N2 - The label-free nature of surface plasmon resonance techniques (SPR) enables a fast, specific, and sensitive analysis of molecular interactions. However, detection of highly diluted concentrations and small molecules is still challenging. It is shown here that in contrast to continuous gold films, gold nanohole arrays can significantly improve the performance of SPR devices in angle-dependent measurement mode, as a signal amplification arises from localized surface plasmons at the nanostructures. This leads consequently to an increased sensing capability of molecules bound to the nanohole array surface. Furthermore, a reduced graphene oxide (rGO) sensor surface was layered over the nanohole array. Reduced graphene oxide is a 2D nanomaterial consisting of sp2-hybridized carbon atoms and is an attractive receptor surface for SPR as it omits any bulk phase and therefore allows fast response times. In fact, it was found that nanohole arrays demonstrated a higher shift in the resonance angle of 250–380% compared to a continuous gold film. At the same time the nanohole array structure as characterized by its diameter-to-periodicity ratio had minimal influence on the binding capacity of the sensor surface. As a simple and environmentally highly relevant model, binding of the plasticizer diethyl phthalate (DEP) via π-stacking was monitored on the rGO gold nanohole array realizing a limit of detection of as low as 20 nM. The concentration-dependent signal change was studied with the best performing rGO-modified nanohole arrays. Compared to continuous gold films a diameter-to-periodicity ratio (D/P) of 0.43 lead to a 12-fold signal enhancement. Finally, the effect of environmental waters on the sensor was evaluated using samples from sea, lake and river waters spiked with analytically relevant amounts of DEP during which significant changes in the SPR signal are observed. It is expected that this concept can be successfully transferred to enhance the sensitivity in SPR sensors. KW - diethyl phthalate KW - environmental sensing KW - nanohole array KW - nanosphere lithography KW - surface plasmon resonance Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:355-epub-398623 IS - 7 SP - 1564 EP - 1573 ER - TY - CHAP A1 - Hausler, Peter A1 - Genslein, Christa A1 - Roth, Carina A1 - Hirsch, Thomas A1 - Bierl, Rudolf T1 - Mikro-Opto-Elektro-Mechanisches Sensorsystem zur Oberflächenplasmonenresonanzspektroskopie T2 - MikroSystemTechnik Kongress 2017 : MEMS, Mikroelektronik, Systeme 23.-25. Oktober 2017 in München N2 - Gezeigt wird die Miniaturisierung eines Messsystems für Oberflächenplasmonenresonanzspektroskopie (SPR), einer markierungs-, sowie zerstörungsfreien als auch hoch sensitiven Technologie. Aufgrund der hohen Kosten klassischer SPR-Geräte wird sie bisher jedoch vornehmlich in der Bio- und Medizintechnik eingesetzt. Das Messprinzip ermöglicht die Erfassung von Brechungsindexänderungen nahe einer Oberfläche. Der Transfer dieser Technologie von Laborgeräten hin zu einem miniaturisierten Sensorsystem senkt die Kosten, macht das System robuster und ermöglicht so ein wesentlich breiteres Anwendungsspektrum. Ein sehr vielversprechendes Merkmal des hier vorgestellten Systems ist die Möglichkeit den SPR-Effekt winkelabhängig zur Lichtquelle ohne bewegliche Bauteile zu verfolgen. The miniaturization of Surface Plasmon Resonance (SPR) technology, which mainly finds its applications in pharmaceutical screening and biotechnology so far, is described. SPR spectroscopy is a label-free, non destructive and highly sensitive measurement principle which is capable of detecting changes in the refractive index in striking distance to a gold surface. A transfer of this technology to a miniaturized sensor will broaden the range of possible applications. A promising feature which is included in the miniaturized system is the angle-dependent recording of the SPR signals without moving parts. KW - Bewegungselement KW - Biotechnik KW - Brechungsindex KW - Goldoberfläche KW - Laborgerät KW - Lichtquelle KW - Medizintechnik KW - Messprinzip KW - Messsystem KW - Miniaturisierung KW - Oberflächenplasmon KW - Oberflächenplasmonenresonanzspektroskopie KW - pharmazeutisches Screening KW - Sensorsystem KW - Spektroskopie Y1 - 2017 SN - 978-3-8007-4491-6 IS - CD-ROM SP - 645 EP - 647 PB - VDE-Verlag CY - Berlin ER - TY - CHAP A1 - Genslein, Christa A1 - Hauser, Peter A1 - Kirchner, Eva-Maria A1 - Bierl, Rudolf A1 - Baeumner, Antje J. A1 - Hirsch, Thomas T1 - Detection of small molecules with surface plasmon resonance by synergistic plasmonic effects of nanostructured surfaces and graphene T2 - SPIE Proceedings, Plasmonics in Biology and Medicine XIV, 2017, San Francisco, California N2 - Surface plasmon resonance depends on the dielectric medium at the vicinity and makes it a quasi-universal detector. Therefore, and due to the label-free nature, SPR is a widely used sensing tool for real‐time monitoring molecular interactions of various analytes. However, detection of highly diluted analytes and small molecules (< 400 Da) is still challenging. Gold nanohole arrays provide plasmonic hotspots with improved surface sensitivity and 2D carbon nanomaterials enable binding near the surface. Both effects together are promising in the development of SPR sensors for the efficient determination of small molecules. Graphene is known for efficient binding of molecules with delocalized aromatic π-systems. Additionally, the electromagnetic field is locally enhanced and modulated by the interaction of graphene photonics with the plasmonics of metal nanostructures. The advantages of chemical vapor deposition (CVD) graphene over reduced graphene oxide (rGO) is illustrated by a proof of concept study. In comparison to substrates consisting of a continuous film the surface sensitivity is enhanced for a nanohole arrays and further improved for CVD graphene functionalization in contrast to rGO. The feasibility of the sensor was demonstrated for the detection of adenine down to a concentration of 0.9 μM. Y1 - 2017 U6 - https://doi.org/10.1117/12.2252256 VL - 10080 IS - 1008001F ER - TY - CHAP A1 - Hausler, Peter A1 - Holler, Sven A1 - Hirsch, Thomas A1 - Bierl, Rudolf T1 - High integrated miniaturized sensor based on Surface Plasmon Resonance T2 - International Biosensor Conference, 11th Workshop on Biosensors & Bioanalytical Microtechniques in Environmental, Food & Clinical Analysis, BBMEC 11, 26.-30. September 2015, Regensburg, Germany Y1 - 2015 ER - TY - CHAP A1 - Hausler, Peter A1 - Holler, Sven A1 - Hirsch, Thomas A1 - Bierl, Rudolf T1 - Miniaturisierte Oberflächenplasmonenresonanz Sensorplattform T2 - MEMS, Mikroelektronik, Systeme, MikroSystemTechnik Kongress 2015, 26.- 28. Oktober 2015, Karlsruhe, proceedings Y1 - 2015 SN - 978-3-8007-4100-7 PB - VDE Verlag CY - Berlin ER - TY - JOUR A1 - Pangerl, Jonas A1 - Moser, Elisabeth A1 - Müller, Max A1 - Weigl, Stefan A1 - Jobst, Simon A1 - Rück, Thomas A1 - Bierl, Rudolf A1 - Matysik, Frank-Michael T1 - A sub-ppbv-level Acetone and Ethanol Quantum Cascade Laser Based Photoacoustic Sensor– Characterization and Multi-Component Spectra Recording in Synthetic Breath JF - Photoacoustics N2 - Trace gas analysis in breath is challenging due to the vast number of different components. We present a highly sensitive quantum cascade laser based photoacoustic setup for breath analysis. Scanning the range between 8263 and 8270 nm with a spectral resolution of 48 pm, we are able to quantify acetone and ethanol within a typical breath matrix containing water and CO2. We photoacoustically acquired spectra within this region of mid-infra-red light and prove that those spectra do not suffer from non-spectral interferences. The purely additive behavior of a breath sample spectrum was verified by comparing it with the independently acquired single component spectra using Pearson and Spearman correlation coefficients. A previously presented simulation approach is improved and an error attribution study is presented. With a 3σ detection limit of 6.5 ppbv in terms of ethanol and 250 pptv regarding acetone, our system is among the best performing presented so far. KW - Acetone KW - Breath analysis KW - Photoacoustic spectroscopy KW - Quantum cascade laser KW - Spectral simulation Y1 - 2023 U6 - https://doi.org/10.1016/j.pacs.2023.100473 SN - 2213-5979 N1 - Corresponding author: Jonas Pangerl VL - 30 SP - 1 EP - 12 PB - Elsevier ER - TY - CHAP A1 - Weigl, Stefan A1 - Müller, Max A1 - Pangerl, Jonas A1 - Rück, Thomas T1 - Scopes and Limits of Photoacoustic Spectroscopy in Modern Breath Analysis T2 - Breath Analysis N2 - Photoacoustic spectroscopy is a viable tool for trace gas detection in various application fields. In recent years, this technique has been exploited more and more for modern breath analysis as well. Within this chapter, a holistic overview of photoacoustic spectroscopy is presented, while maintaining the relationship to breath analysis. Therefore, a concise description of the fundamentals of photoacoustic spectroscopy is provided. This is essential for understanding the scopes and limits of this outstanding measurement technique being described within this chapter. In the past several different types of photoacoustic measurement setups for trace gas detection have emerged, including different light sources, modulation techniques, and detection schemes. These are described shortly and advantages as well as disadvantages, especially in relation to breath analysis, are highlighted. Though being a promising sensor principle, measurement devices based on photoacoustic spectroscopy are still rare on the sensor market, especially when it comes to trace gas detection in complex gas matrices, e.g., human breath exhale. One main reason is due to possible molecular interactions influencing the relaxational behavior of the analyte altering the sensor signal. Recent results shedding light on the intricate relaxational processes within complex gas matrices are discussed in detail, providing approaches to overcome this issue. Finally, various applications of photoacoustic spectroscopy in breath analysis are described demonstrating the great potential of this technology. Y1 - 2022 SN - 978-3-031-18526-7 U6 - https://doi.org/10.1007/11663_2022_22 SP - 101 EP - 159 PB - Springer nature ER - TY - PAT A1 - Olbrich, Florian A1 - Pongratz, Christian A1 - Bierl, Rudolf A1 - Ehrlich, Ingo T1 - Method and System for Evaluating a Structural Integrity of an Aerial Vehicle T2 - Europäisches Patentblatt (09.12.2020) zur Anmeldung: OTH Regensburg, Anmeldenummer: 19179054.2, Patentnummer 1001/3748327, Veröffentlichungsnummer: 3 748 327 Y1 - 2020 SP - 395 EP - 396 ER - TY - CHAP A1 - Hausler, Peter A1 - Fischer, Johannes A1 - Wunderlich, Lukas A1 - Recum, Patrick A1 - Peller, Sebastian A1 - Hirsch, Thomas A1 - Bierl, Rudolf T1 - Miniaturisierte Sensoren basierend auf Oberflächenplasmonenresonanz, Chancen und Herausforderungen T2 - DGaO-Proceedings 2021 N2 - Derzeit gibt es zahlreiche Bereiche, wie Umwelt Monitoring und zivile Infrastruktur in denen geeignete Sensoren für die Überwachung der Systeme fehlen. SPR-basierte Sensoren haben das Potential diese Lücke zu schließen. Um für den Einsatz in der Umwelt tauglich zu werden, müssen die Sensoren noch robuster werden. Hier wird eine mögliche Lösung gezeigt. Y1 - 2021 UR - https://www.dgao-proceedings.de/download/122/122_a21.pdf PB - Dt. Gesellschaft für angewandte Optik CY - Erlangen-Nürnberg ER - TY - JOUR A1 - Moser, Elisabeth A1 - Jobst, Simon A1 - Bierl, Rudolf A1 - Jenko, Frank T1 - A Deep Learning System to Transform Cross-Section Spectra to Varying Environmental Conditions JF - Vibrational Spectroscopy N2 - Absorption cross-sections provide a basis for many gas sensing applications. Therefore, any error in molecular cross-sections caused by varying environmental conditions propagates to spectroscopic applications. Original molecular cross-sections in varying environmental conditions can only be simulated for some molecules, whereas for most multi-atom molecules, one must rely on high-precision measurements at certain environmental configurations. In this study, a deep learning system trained with simulated absorption cross-sections for predicting cross-sections at a different pressure configuration is presented. The system’s capability to transfer to measured, multi-atom cross-sections is demonstrated. Thus, it provides an alternative to (pseudo-) line lists whenever the required information for simulation is unavailable. The predictive performance of the system was evaluated on validation data via simulation, and its transfer learning capabilities were demonstrated on actual measurement chlorine nitrate data. From the comparison between the system and line lists, the system shows slightly worse performance than pseudo-line lists but its predictive quality is still deemed acceptable with less than 5% relative integral change with a highly localized error around the peak center. This opens a promising way for further research to use deep learning to simulate the effect of varying environmental conditions on absorption cross-sections. KW - Spectroscopy KW - Deep learning KW - Simulation KW - Pressure broadening KW - Pseudo-line lists KW - Transfer learning Y1 - 2022 U6 - https://doi.org/10.1016/j.vibspec.2022.103410 SN - 0924-2031 VL - 122 IS - September PB - Elsevier ER - TY - CHAP A1 - Moser, Elisabeth A1 - Pangerl, Jonas A1 - Jobst, Simon A1 - Weigl, Stefan A1 - Bierl, Rudolf T1 - Modeling the Photoacoustic Spectrum of a Quantum Cascade Laser for Human Breath T2 - Optical Sensors and Sensing Congress 2022 (AIS, LACSEA, Sensors, ES): July 11 - 15, 2022, Vancouver, British Columbia Canada N2 - A modeling approach to create a photoacoustic spectrum from synthetic data is presented and evaluated. The resulting model reaches a MAPE score of 2.7% and can be used to enable data-driven development in future work. KW - Quantenkaskadenlaser KW - Photoakustische Spektrometrie KW - Atemluft Y1 - 2022 SN - 978-1-957171-10-4 U6 - https://doi.org/10.1364/AIS.2022.ATu3G.2 PB - Optica Publishing Group ER - TY - JOUR A1 - Goldschmidt, Jens A1 - Moser, Elisabeth A1 - Nitzsche, Leonard A1 - Bierl, Rudolf A1 - Wöllenstein, Jürgen T1 - Improving the performance of artificial neural networks trained on synthetic data in gas spectroscopy – a study on two sensing approaches JF - tm - Technisches Messen N2 - Artificial neural networks (ANNs) are used in quantitative infrared gas spectroscopy to predict concentrations on multi-component absorption spectra. Training of ANNs requires vast amounts of labelled training data which may be elaborate and time consuming to obtain. Additional data can be gained by the utilization of synthetically generated spectra, but at the cost of systematic deviations to measured data. Here, we present two approaches to train ANNs with a combination of comparatively small, measured data sets and synthetically generated data. For the first approach a neural network is trained hybridly with synthetically generated infrared absorption spectra of mixtures of N2O and CO and measured zero-gas spectra, taken with a mid-infrared dual comb spectrometer. This improves the mean absolute error (MAE) of the network predictions from 0.46 to 0.01 ppmV and 0.24 to 0.01 ppmV for the concentration predictions of N2O and CO respectively for zero-gas measurements which was previously observed for training with purely synthetic data. At the same time a similar performance on spectra from gas mixtures of 0–100 ppmV N2O and 0 to 60 ppmV CO was achieved. For the second approach an ANN pre-trained on synthetic infrared spectra of mixtures of acetone and ethanol is retrained on a small dataset consisting of 26 spectra taken with a mid-infrared photoacoustic spectrometer. In this case the MAE for the concentration predictions of ethanol and acetone are improved by 45 % and 20 % in comparison to purely synthetic training. This shows the capability of using synthetically generated data to train ANNs in combination with small amounts of measured data to further improve neural networks for gas sensing and the transferability between different sensing approaches. N2 - Künstliche neuronale Netze werden in der quantitativen Infrarot-Gasspektroskopie eingesetzt, um Gaskonzentrationen in Multi-Komponenten-Absorptionsspektren vorherzusagen. Das Training von künstlichen neuronalen Netzen benötigt große Mengen an Trainingsdaten, was mit einem hohen Arbeits- und Zeitaufwand verbunden ist. Zusätzliche Trainingsdaten können durch synthetisch generierte Spektren gewonnen werden, sind jedoch mit systematischen Abweichungen zu tatsächlich gemessenen Daten verbunden. In dieser Arbeit werden zwei Ansätze präsentiert, um künstliche neuronale Netze mit einer Kombination aus vergleichsweise kleinen, gemessenen Datensätzen und synthetisch erzeugten Daten zu trainieren. Für den ersten Ansatz wird das neuronale Netz hybrid mit synthetisch erzeugten Infrarot-Absorptionsspektren von Mischungen aus N2O und CO und gemessenen Null-Gas-Spektren trainiert, welche mit einem Doppel-Kamm-Spektrometer im Mittelinfraroten aufgenommen wurden. Dieses Vorgehen verbessert den mittleren, absoluten Fehler der Netzvorhersagen von 0,46 auf 0,01 ppmV und 0,24 auf 0,01 ppmV für N2O bzw. für CO für Null-Gas-Messungen, im Vergleich zu den Vorhersagen des neuronalen Netzes, welches nur mit synthetisch erzeugten Daten trainiert wurde. Gleichzeitig zeigte das hybrid trainierte Netz eine gleichbleibende Performance für Konzentrationsvorhersagen für Spektren aus Gasmischungen von 0 bis 100 ppmV N2O und 0 bis 60 ppmV CO. Für den zweiten Ansatz wird ein neuronales Netz, welches bereits mit synthetischen erzeugten Infrarotspektren von Mischungen aus Aceton und Ethanol trainiert wurde, erneut auf einem kleinen gemessenen Datensatz bestehend aus 26 Spektren trainiert, welche mit einem photoakustischen Spektrometer im mittleren Infrarot aufgenommen wurden. In diesem Fall hat sich der mittlere absolute Fehler der Konzentrationsvorhersage für Ethanol und Aceton um 45 % bzw. 20 % im Vergleich zu einem rein synthetischen Training verbessert. Das zeigt das Potential synthetisch erzeugte Daten für das Training von künstlichen neuronalen Netzen in Kombination mit kleinen gemessenen Datensätzen zu nutzen, um neuronale Netze für den Einsatz im Bereich der Gassensorik zu verbessern und gleichzeitig die Übertragbarkeit der Methodik auf verschiedene Messansätze. Y1 - 2023 U6 - https://doi.org/10.1515/teme-2023-0051 PB - Oldenbourg Wissenschaftsverlag ET - Online veröffentlicht ER - TY - CHAP A1 - Ulreich, Fabian A1 - Moser, Elisabeth A1 - Olbrich, Florian A1 - Ebert, Martin A1 - Bierl, Rudolf A1 - Kaup, André ED - Keil, Rudolf ED - Tschorn, Jan Alexander ED - Tümler, Johannes ED - Altinsoy, Mehmet Ercan T1 - Luminance Simulation in CARLA under Cloud Coverage - Model Validation and Implications T2 - 2023 IEEE International Workshop on Metrology for Automotive (MetroAutomotive), -30 June 2023, Modena, Italy N2 - To decrease the number of kilometers driven during the development of autonomous cars or driving assistance systems, performant simulation tools are necessary. Currently, domain distance effects between simulation and reality are limiting the successful application of rendering engines in data-driven perception tasks. In order to mitigate those domain distance effects, simulation tools have to be as close to reality as possible for the given task. For optical sensors like cameras, the luminance of the scene is essential. We provide within this paper a method to measure the luminance of rendered scenes within CARLA, an often used open-source simulation environment. Thereby, it is possible to validate the environment and weather models by taking real-world measurements with photometric sensors or with the help of open-source weather data, published e.g. by the German federal service for weather data (DWD - "Deutscher Wetterdienst"). Employing our proposed luminance measurement, the domain gap resulting from the simulation can be specified, which makes it possible to evaluate the statements about the safety of the automated driving system determined within the simulation. We show that the ratio between global and diffuse radiation modeled by the default atmosphere models within CARLA are under limited conditions similar to real-world measurements taken by the DWD. Nevertheless, we show, that the ratio’s temporal variability in real-world situations is not modeled by CARLA. KW - Atmospheric measurements KW - Atmospheric modeling KW - Cameras KW - carla KW - Cloud computing KW - cloud coverage KW - Data models KW - luminance KW - meteorology KW - Simulation KW - Soft sensors KW - weather KW - Wind Y1 - 2023 SN - 979-8-3503-2187-6 U6 - https://doi.org/10.1109/MetroAutomotive57488.2023.10219098 SP - 228 EP - 233 PB - IEEE ER - TY - JOUR A1 - Müller, Max A1 - Weigl, Stefan A1 - Müller-Williams, Jennifer A1 - Lindauer, Matthias A1 - Rück, Thomas A1 - Jobst, Simon A1 - Bierl, Rudolf A1 - Matysik, Frank-Michael T1 - Comparison of photoacoustic spectroscopy and cavity ring-down spectroscopy for ambient methane monitoring at Hohenpeißenberg JF - Atmospheric Measurement Techniques N2 - With an atmospheric concentration of approximately 2000 parts per billion (ppbV, 10−9), methane (CH4) is the second most abundant greenhouse gas (GHG) in the atmosphere after carbon dioxide (CO2). The task of long-term and spatially resolved GHG monitoring to verify whether climate policy actions are effective is becoming more crucial as climate change progresses. In this paper we report the CH4 concentration readings of our photoacoustic (PA) sensor over a 5 d period at Hohenpeißenberg, Germany. As a reference device, a calibrated cavity ring-down spectrometer, Picarro G2301, from the meteorological observatory of the German Weather Service (DWD) was employed. Trace gas measurements with photoacoustic instruments promise to provide low detection limits at comparably low costs. However, PA devices are often susceptible to cross-sensitivities related to fluctuating environmental conditions, e.g. ambient humidity. The obtained results show that for PA sensor systems non-radiative relaxation effects induced by varying humidity are a non-negligible factor. Applying algorithm compensation techniques, which are capable of calculating the influence of non-radiative relaxation effects on the photoacoustic signal, increase the accuracy of the photoacoustic sensor significantly. With an average relative deviation of 1.11 % from the G2301, the photoacoustic sensor shows good agreement with the reference instrument. Y1 - 2023 U6 - https://doi.org/10.5194/amt-16-4263-2023 SN - 1867-8548 VL - 16 IS - 18 SP - 4263 EP - 4270 PB - Copernicus Publications ER - TY - INPR A1 - Pangerl, Jonas A1 - Moser, Elisabeth A1 - Müller, Max A1 - Weigl, Stefan A1 - Jobst, Simon A1 - Rück, Thomas A1 - Bierl, Rudolf A1 - Matysik, Frank-Michael T1 - A Highly Sensitive Acetone and Ethanol Quantum Cascade Laser Based Photoacoustic Sensor: Characterization and Multi-Component Spectra Recording in Synthetic Breath T2 - SSRN Electronic Journal N2 - Trace gas analysis in breath is challenging due to the vast number of different components. We present a highly sensitive quantum cascade laser based photoacoustic setup for breath analysis. Scanning the range between 8260 and 8270 nm with a spectral resolution of 48 pm, we are able to quantify acetone and ethanol within a typical breath matrix containing water and CO2. We photoacoustically acquired spectra within this region of mid-infra-red light and prove that those spectra do not suffer from non-spectral interferences. The purely additive behavior of a breath sample spectrum was verified by comparing it with the independently acquired single component spectra using Pearson and Spearman correlation coefficients. A previously presented simulation approach is improved and an error attribution study is presented. With a 3σ detection limit of 6.5 ppbV in terms of ethanol and 250 pptV regarding acetone, our system is among the best performing presented so far. KW - Photoacoustic spectroscopy KW - quantum cascade laser KW - spectral simulation KW - breath analysis KW - acetone Y1 - 2022 U6 - https://doi.org/10.2139/ssrn.4305376 PB - Elsevier ER - TY - CHAP A1 - Roth, Carina A1 - Hausler, Peter A1 - Bierl, Rudolf T1 - Einbindung eines 2D-Photodetektors in einen hochintegrierten SPR-Imaging-Sensor T2 - 7. MikroSystemTechnik Kongress "MEMS, Mikroelektronik, Systeme", 23.-25. Oktober 2017, München N2 - Die Oberflächenplasmonenresonanzspektroskopie (SPR) ist eine hochempfindliche Messmethode, die es erlaubt, Gase und Flüssigkeiten zerstörungs- und markierungsfrei in Echtzeit zu analysieren. Bisher vornehmlich im Labormaßstab in der Bioanalytik und dem Wirkstoffscreening eingesetzt, soll diese Technologie nun miniaturisiert und für weitere Anwendungsgebiete zugänglich gemacht werden. Dazu wird ein kompakter Micro-Opto-Electro-Mechanical Systems Sensor (MOEMS) entwickelt, der mit Hilfe des SPR Imaging Änderungen der chemischen Zusammensetzung verschiedener Flüssigkeiten inline messen kann. N2 - Surface plasmon resonance spectroscopy (SPR) is a highly sensitive measurement method which allows the analysis of gases and liquids in real-time in a non-destructive and marking-free manner. Presently SPR is predominantly used for pharmaceutical screening and biotechnical analysis. Now this technology is to be miniaturized and made accessible for further application areas. For this purpose, a compact micro-opto-electro-mechanical system sensor (MOEMS) is developed, which can measure changes in the chemical composition of different fluids using SPR imaging. T2 - Integration of a 2D-photodetector in a SPR-Imaging-Sensor KW - Bildsensor KW - Bioanalytik KW - chemische Zusammensetzung KW - Fotodetektor KW - Labormaßstab KW - Messmethode KW - mikrooptoelektromechanisches System KW - Oberflächenplasmon KW - Oberflächenplasmonenresonanzspektroskopie KW - pharmazeutisches Screening KW - Spektroskopie KW - Wirkstoff Y1 - 2017 SN - 978-3-8007-4491-6 SP - 848 EP - 850 PB - VDE-Verlag CY - München ER - TY - CHAP A1 - Bauer, Lukas A1 - Vitzthumecker, Thomas A1 - Bierl, Rudolf A1 - Ehrnsperger, Matthias T1 - Machine-learning-based detection and severity estimation of drought stress in plants using hyperspectral imaging data T2 - Remote Sensing for Agriculture, Ecosystems, and Hydrology XXVII N2 - Growing food demand due to population growth, coupled with increasingly frequent and severe droughts caused by climate change make water increasingly scarce. To address this, accurate assessment of plant water demand is essential for precise drought treatment and water conservation. Hyperspectral imaging (HSI) captures hypercubes, a combination of spectral and spatial data and offers promising capabilities for detection of plant stresses. However, most reported approaches only use selected spectral bands or indices, neglecting the full hypercube information. This is assumed to limit the detection accuracy. To overcome these limitations, we aim to develop a measurement pipeline to generate a comprehensive dataset comprising hypercubes of plants under varying drought stress levels along with selected physiological, environmental, and illumination data. This dataset will be used to train suitable data-driven models that enable improved drought stress detection as well as the non-invasive determination of physiological parameters based on HSI data. Y1 - 2025 U6 - https://doi.org/10.1117/12.3072011 PB - SPIE ER -