TY - CHAP A1 - Swidergal, Krzysztof A1 - Lubeseder, Christian A1 - Wurmb, Ingo von A1 - Meinhardt, Josef A1 - Wagner, Marcus A1 - Marburg, Steffen T1 - Vibration analysis of an automotive forming tool using coupled MBS-FEM simulation and experimental validation T2 - Proceedings of the 26th International Conference on Noise and Vibration Engineering (ISMA2014), Leuven, Belgium N2 - To improve efficiency in automotive press shops, press systems with increasingly high stroke rates are beingimplemented, raising thereby the structural dynamic load on the press and especially on the forming tool. Adetailed knowledge of the vibrations and resulting critical loads is thus essential for accurate and reliable de-signs of forming tools. In this paper, multibody simulation (MBS) of a selected automotive tool is presentedenabling the identification of the vibration of its components. Starting from a pure rigid modelling approach,the MBS model is extended by adding finite element (FE) component to allow extra flexibility in the sys-tem. As an example, a detailed vibrational analysis - both in time and frequency domain - is performed ona blankholder. Also an experimental validation of a blankholder vibration under operational load is carriedout, with test signal data gained by piezoelectric accelerometers. Y1 - 2014 UR - http://past.isma-isaac.be/downloads/isma2014/papers/isma2014_0245.pdf SP - 2931 EP - 2942 ER - TY - CHAP A1 - Swidergal, Krzysztof A1 - Lubeseder, Christian A1 - Wurmb, Ingo von A1 - Lipp, Arnulf A1 - Meinhardt, Josef A1 - Wagner, Marcus A1 - Marburg, Steffen T1 - Structural analysis of an automotive forming tool for large presses using LS-DYNA T2 - 10th European LS-DYNA Conference, Würzburg Y1 - 2015 ER - TY - CHAP A1 - Swidergal, Krzysztof A1 - Lubeseder, Christian A1 - Wurmb, Ingo von A1 - Meinhardt, Josef A1 - Wagner, Marcus A1 - Marburg, Steffen T1 - Effiziente Methode zur Bestimmung von dynamischen strukturellen Belastungen in Großpresswerkzeugen T2 - 36. EFB-Kolloquium Blechverarbeitung 2016, Fellbach Y1 - 2016 ER - TY - CHAP A1 - Swidergal, Krzysztof A1 - Thumann, Philipp A1 - Lubeseder, Christian A1 - Wurmb, Ingo von A1 - Meinhardt, Josef A1 - Wagner, Marcus A1 - Marburg, Steffen T1 - Modeling and simulation of carbon black filled elastomer damper using LS-DYNA T2 - LS-DYNA Forum 2014, Bamberg Y1 - 2014 ER - TY - THES A1 - Thumann, Philipp T1 - Lebensdauerbewertung von stoßartig belasteten Werkzeugkomponenten T1 - Durability analyses of tool components subjected to impact loading N2 - Die vorliegende Arbeit beinhaltet ein neuartiges Gesamtkonzept zur Betriebsfestigkeitsbewertung von Werkzeugkomponenten unter Berücksichtigung dynamischer Einflüsse. Es werden experimentelle Untersuchungen an Proben aus dem Vergütungsstahl 42CrMoS4-QT sowie aus den Gusseisen mit Kugelgraphit EN-GJS-600-3 und mit Lamellengraphit EN-GJL-250 durchgeführt. Die Ergebnisse aus den Versuchen dienen zum einen zur allgemeinen Validierung von Betriebsfestigkeitsrechnungen. Zum anderen wird damit die Frequenzabhängigkeit in Bezug auf stoßartige Belastungen untersucht. Neben den validierten Berechnungsmodellen resultiert aus den Versuchungen die Erkenntnis einer ausgeprägten Frequenzabhängigkeit, welche in zukünftigen Auslegungsrechnungen berücksichtigt werden muss. Bei Untersuchungen an einem Umform- und Beschneidewerkzeug wird die erarbeitete methodische Vorgehensweise aus den Versuchen angewandt. Es wird eine FE-Simulation eines Gesamtmodells erstellt, welche mit Messungen am Werkzeug validiert wird. Die Untersuchungen am Umform- und Beschneidewerkzeug liefern demnach ein validiertes FE-Simulationsmodell, das neben dem Werkzeug das Pressenmodell und die im Fertigungsprozess zu bearbeitende Platine beinhaltet. Unter Anwendung der Submodelltechnik an einer Einzelkomponente werden geeignete FE-Ergebnisse für eine Betriebsfestigkeitsrechnung generiert. Die Betriebsfestigkeitsrechnung erfolgt nach dem validierten Berechnungsmodell aus den Versuchen. Im Zuge der Analysen am Werkzeug findet das validierte Berechnungsmodell für den Gusswerkstoff EN-GJS-600-3 Anwendung. Die Berechnungsergebnisse korrelieren mit tatsächlich aufgetretenen Schäden an einem Bauteil. N2 - The present work includes a new procedure for the operational fatigue strength assessment of tool components considering dynamic influences. Experimental investigations are carried out on specimen made from the quenched and tempered steel 42CrMoS4-QT as well as from the cast iron with spheroidal graphite EN-GJS-600-3 and with lamellar graphite EN-GJL-250. The results of the tests serve on the one hand for the general validation of operational fatigue strength calculations. On the other hand, the frequency dependency in relation to impact loads is examined. In addition to the validated calculation models, the material tests result in the recognition of a pronounced frequency dependency, which must be considered in future design calculations. In investigations on a forming and cutting tool, the methodical procedure developed from the material tests is used. An FE simulation of an overall model is created, which is validated with measurements on the tool. The investigations on the forming and cutting tool provide a validated FE simulation model, which contains the tool as well as the press model and the sheet metal part to be machined in the manufacturing process. Using the submodel technique on a single component, suitable FE results are generated for an operational fatigue strength calculation. The calculation is based on the validated calculation model from the material tests. In the course of the analyzes on the tool, the validated calculation model for the cast material EN-GJS-600-3 is used. The calculation results correlate with damage that has actually occurred to a component. Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:91-diss-20210713-1554721-1-5 UR - https://mediatum.ub.tum.de/doc/1554721/1554721.pdf ER -