TY - CHAP A1 - Finckh, Wolfgang T1 - Einfluss bauteilspezifischer Effekte auf die Bemessung von mit CFK-Lamellen verstärkten Stahlbetonbauteilen T2 - Beiträge zum Doktorandensymposium 2010, 51. Forschungskolloquium des DAfStb, 11.-12.11.2010, TU Kaiserslautern Y1 - 2010 PB - Deutscher Auschuss für Stahlbeton ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Zilch, Konrad T1 - Strengthening and rehabilitation of reinforced concrete slabs with CFRP T2 - International conference on high rise towers and tall building 2010, April 14-16, Munich Y1 - 2010 CY - München ER - TY - CHAP A1 - Finckh, Wolfgang T1 - EN 1992-1-1 Chapter 7.3: Crack Control – PRB Suggestions for Improvement T2 - Proceedings of the First PRB-Workshop on Contributions for the Ease of Use of the Eurocodes, 4th and 5th December 2014, Berlin Y1 - 2014 SN - 978-3-410-25201-6 SP - 79 EP - 80 PB - Praxisgerechte Regelwerke im Bauwesen e.V. CY - Berlin ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Zilch, Konrad T1 - Practical-Orientated Full-Scale Tests In Comparison With Bond Checks of Different Guidelines T2 - The Third Asia-Pacific Conference on FRP in Structures (APFIS2012), 2 to 4 February 2012, Sapporo, Japan Y1 - 2012 CY - Sapporo ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Zilch, Konrad T1 - Specific structural effects by strengthening pre-stressed concrete beams with externally bonded FRP T2 - 6th International Conference on FRP Composites in Civil Engineering; CICE 2012 Rome ; 13-15 June Y1 - 2012 PB - Sapienza Universita de Roma CY - Rom ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Zilch, Konrad T1 - Influence of shear crack offsets on the bond behavior of EBR at the intermediate crack element T2 - 6th International Conference on FRP Composites in Civil Engineering : CICE 2012 Rome ; 13-15 June Y1 - 2012 PB - Sapienza Universita de Roma CY - Rom ET - CD-ROM ER - TY - GEN A1 - Schermer, Detleff ED - Schermer, Detleff ED - Brehm, Eric T1 - Mauerwerk-Kalender 2023 BT - Schwerpunkte: Instandsetzung; Erdbeben; Lehmbau Y1 - 2023 SN - 978-3-433-03374-6 PB - Ernst & Sohn GmbH CY - Berlin ET - 48. Jahrgang ER - TY - CHAP A1 - Zilch, Konrad A1 - Finckh, Wolfgang T1 - Erweiterung der Verbundmodelle auf eingeschlitzte CFK-Bewehrung T2 - Befestigungstechnik, Bewehrungstechnik und … Y1 - 2012 SN - 978-3-8982-1208-3 PB - ibidem CY - Stuttgart ER - TY - BOOK A1 - Finckh, Wolfgang T1 - Stahlbetonkonstruktion 2 BT - Von der Bauteilberechnung über die Bemessung zur Bauwerksplanung N2 - Aufbauend auf dem ersten Teil „Stahlbetonkonstruktion“ werden in diesem Teil erweiterte Grundlagen der Stahlbetonberechnung erläutert. Neben den Torsionsnachweisen, dem genaueren Verfahren zur Durchbiegeberechnung und den Schnittgrößenumlagerungen werden vor allem besonders häufig vorkommende Stahlbetonbauteile behandelt. Zu diesen Bauteilen zählen Aussteifungssysteme, Bodenplatten, Fundamente, liniengelagerte Platten sowie Elementdecken. Hierbei werden bei diesen Bauteilen, welche nahezu in jedem Bauwerk vorkommen, sowohl die Ermittlung der Schnittgrößen wie auch die Bemessung und konstruktive Durchbildung erklärt. Zusätzlich wird in diesem Lehrbuch auch die Bemessung des Werkstoffes Stahlfaserbeton, welcher insbesondere bei Bodenplatten im Industriebau verwendet wird, erläutert. Die im Lehrbuch vorgestellten theoretischen Grundlagen werden anhand zahlreicher Abbildungen verdeutlicht. In jedem Kapitel sind zum besseren Verständnis umfangreiche Bemessungsbeispiele mit Praxisbezug enthalten. Nach der erfolgreichen Lektüre des ersten Bandes der Reihe „Stahlbetonkonstruktion“ wird in diesem zweiten Band das Wissen gefestigt und stark erweitert. Dies ermöglicht dem Lesenden einen sicheren Umgang mit dem Werkstoff Stahlbeton. KW - Stahlbetonkonstruktion KW - Stahlbetonbau KW - Torsion KW - Aussteifung KW - Fundamente KW - Verbundfugen KW - Torsionsbemessung KW - Platten KW - Aussteifung von Gebäuden KW - Bodenplatten KW - Durchbiegung KW - Schnittgrößenumlagerung KW - Stahlfaserbeton Y1 - 2024 SN - 9783658449605 U6 - https://doi.org/10.1007/978-3-658-44961-2 SN - 2524-8693 PB - Springer Fachmedien Wiesbaden CY - Wiesbaden ER - TY - BOOK A1 - Finckh, Wolfgang T1 - Verstärken von Betonbauteilen BT - Tragwerksplanung im Bestand N2 - Dieses Lehrbuch widmet sich dem Bauen im Bestand mit Betonbauteilen und den dabei häufig vorkommenden Verstärkungsmaßnahmen. Dazu wird zunächst das Sicherheitskonzept bestehender Bauteile erläutert. Darauf aufbauend wird die Analyse der Bestandsmaterialien und das Vorgehen bei einer Analyse des Tragverhaltens des Bestandsbauteils bzw. einer Nachrechnung behandelt. Die weiteren Kapitel des Buches beschäftigen sich mit dem Verstärken der bestehenden Betonbauteile. Hierbei werden alle gängigen Verstärkungen im Stahlbetonbau, wie das Verstärken mit geklebter Bewehrung, Carbonbeton, Betonschrauben und das Verstärken mittels Auf- und Spritzbeton, erklärt. Dabei werden bei allen Verfahren die Gemeinsamkeiten, die Unterschiede sowie die sinnvollsten Anwendungsgebiete herausgearbeitet. Die theoretischen Grundlagen werden anhand zahlreicher Abbildungen verdeutlicht. In jedem Kapitel sind zum besseren Verständnis umfangreiche Bemessungsbeispiele mit Praxisbezug enthalten. Die erfolgreiche Lektüre dieses Buches ermöglicht dem Lesenden, sich den tragwerksplanerischen Aufgaben von bestehenden Betonbauwerken zu stellen und Verstärkungsmaßnahmen zu berechnen. KW - Bestandsbeton KW - Bauen im Bestand KW - Bewertung KW - Verstärken KW - CFK-Lamellen KW - Carbonbeton KW - Sicherheitskonzept KW - Spritzbeton KW - Aufbeton KW - Sützenverstärkung KW - Schubverbinder KW - Betonschrauben KW - Biegeverstärkung KW - Querkraftverstärkung Y1 - 2024 SN - 9783658458560 U6 - https://doi.org/10.1007/978-3-658-45857-7 SN - 2524-8693 PB - Springer Fachmedien Wiesbaden CY - Wiesbaden ER - TY - BOOK A1 - Finckh, Wolfgang T1 - Mit Stabwerkmodellen zur Bewehrungsführung: Detailnachweise im Stahlbetonbau N2 - Aufbauend auf den Grundlagen des Stahlbetonbaus wird in diesem Lehrbuch das Konzept der Bemessung von Stahlbetonkonstruktionen mittels Stabwerkmodellen erläutert. Dieses Bemessungskonzept wird insbesondere im Bereich der Detailnachweise und bei gedrungenen Tragwerken im Stahlbetonbau benötigt. Neben der generellen Modellbildung und Nachweismethodik werden auch die üblichen Modelle und Nachweise für häufig vorkommende Details vorgestellt. Hierbei werden insbesondere Krafteinleitungsbereiche, Konsolen, ausgeklinkte Auflager, Rahmenknoten, Querschnittssprünge, Trägeröffnungen und Wandartige Träger detailliert behandelt. Die im Lehrbuch vorgestellten theoretische Grundlagen werden anhand zahlreicher Abbildungen erläuterten. In jedem Kapitel sind zum besseren Verständnis umfangreiche Bemessungsbeispiele mit Praxisbezug enthalten. KW - Abgesetzte Auflager KW - Auflager KW - Druckkräfte KW - Konsolen KW - Stabkräfte KW - Stabwerk KW - Stabwerksmodelle KW - Stegöffnungen KW - Wandartige Träger KW - Zugkräfte Y1 - 2023 SN - 978-3-658-40881-7 U6 - https://doi.org/10.1007/978-3-658-40882-4 PB - Springer Fachmedien CY - Wiesbaden ER - TY - BOOK A1 - Finckh, Wolfgang T1 - Stahlbetonkonstruktion BT - von der Bemessung über die Konstruktionsregeln zum Bewehrungsplan N2 - Die Grundlagen der Berechnung von Stahlbetonbauteilen werden in diesem Lehrbuch anhand der mechanischen Beziehungen erläutert. Ausgehend von den Nachweisen für Biegung und Querkraft werden auch die Berechnungen für die im Hochbau üblichen Stahlbetonbauteile, wie Balken, Platten, Stützen und Flachdecken erarbeitet. Neben den Nachweisen für Trag- und Gebrauchstauglichkeit werden aufbauend auf den Bemessungsergebnissen die Konstruktionsregeln und Bewehrungsführungen umfangreich dargestellt. Die im Lehrbuch vorgestellten theoretischen Grundlagen werden anhand zahlreicher Abbildungen erläutert. In jedem Kapitel sind zum besseren Verständnis umfangreiche Bemessungsbeispiele mit Praxisbezug enthalten. Um die LeserInnen für die Baupraxis vorzubereiten, werden auch die Erstellung von statischen Berechnungen, Schalplänen und von Bewehrungsplänen behandelt. Damit wird für den Hochbau eine umfassende Basis des Stahlbetonbaus vermittelt, welche einen erfolgreichen Start ins Berufsleben gewährleistet. KW - Abgesetzte Auflager KW - Bewehrung, Bewehrungsführung KW - Krafteinleitungsbereiche KW - Modellbildung KW - Rahmenknoten KW - Stabwerksmodelle KW - Stegöffnungen KW - Wandartige Träger Y1 - 2023 SN - 978-3-658-41336-1 U6 - https://doi.org/10.1007/978-3-658-41336-1 PB - Springer Fachmedien CY - Wiesbaden ER - TY - GEN A1 - Schermer, Detleff T1 - Test set-up and proposed testing procedure for the determination of masonry walls under in-plane shear loadings : Brick and Block Masonry: Trends, Innovations and Challenges T2 - Proceedings of the 16th International Brick and Block Masonry Conference (IMAC), Padova, Italy, 26-30 June 2016 Y1 - 2016 SP - 1883 EP - 1888 PB - Routledge ER - TY - JOUR A1 - Schermer, Detleff A1 - Meyer, Udo Joachim A1 - Lutman, Marjana A1 - Triller, Petra T1 - Shear tests on full scale storey-height specimens constructed with thermally insulating clay unit masonry with thin-layer mortar JF - Mauerwerk N2 - The paper presents results of a series of 6 in-plane shear tests on storey-height clay unit masonry panels [1] with thin-layer mortar, carried out in addition to previous test campaigns [2], [3], and [4]. The walls were constructed with unfilled thermally insulating clay units with a thermal conductivity of lambda = 0.09 W/(m . K). The current design rules for clay unit masonry according to DIN EN 1996-1-1/NA [5] are conservative compared to the presented test results for thermally insulating clay unit masonry. KW - clay units KW - design KW - in-plane shear KW - test methods KW - thin-layer mortar KW - WALLS Y1 - 2019 U6 - https://doi.org/10.1002/dama.201900025 SN - 1432-3427 VL - 23 IS - 6 SP - 378 EP - 386 PB - Ernst & Sohn ER - TY - JOUR A1 - Schermer, Detleff A1 - Schmalz, Jonathan A1 - Meyer, Udo Joachim A1 - Gams, Matija A1 - Lutman, Marjana A1 - Triller, Petra T1 - Shear tests on thermal insulating clay unit masonry walls with thin layer mortar JF - Mauerwerk N2 - The paper presents the results of 20 shear tests on full scale thermal insulating clay unit masonry walls. The types of units used (units with large chambers filled with mineral wool pads and units with small corings filled with mineral wool granulate) as well as the tested wall geometries and vertical loads are representative of the most common wall constructions currently used in housing in Germany. The aim of the investigations was the verification of the shear -resistance of thermal insulating clay unit masonry under realistic conditions and comparison with the design rules in the codes and national technical approvals. The current design rules for clay unit masonry in DIN EN 1996-1-1/NA are rather conservative compared to the test results for thermal insulating units. KW - design KW - experimental testing KW - high precision clay masonry units KW - masonry with thin layer mortar KW - shear KW - thin layer mortar Y1 - 2018 U6 - https://doi.org/10.1002/dama.201800028 VL - 22 IS - 6 SP - 385 EP - 398 PB - Ernst & Sohn, a Wiley brand ER - TY - CHAP A1 - Schermer, Detleff ED - Zilch, Konrad T1 - Bemessung von Mauerwerk T2 - Konstruktiver Ingenieurbau und Hochbau: Technik, Organisation, Wirtschaftlichkeit. N2 - Die Bemessung von Mauerwerk deckt neben der Tragfähigkeit auch den Nachweis der Gebrauchstauglichkeit ab. Im Beitrag werden die Grundanforderungen und Hintergründe der Bemessung von Mauerwerk dargelegt und die Lösungen nach den aktuellen Vorschriften von Eurocode 6 und dem Nationalen Anhang erläutert. Y1 - 2024 SN - 978-3-658-29498-4 U6 - https://doi.org/10.1007/978-3-658-29498-4_66 SP - 443 EP - 473 PB - Springer Fachmedien CY - Wiesbaden ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Zilch, Konrad ED - Ye, Lieping ED - Feng, Peng ED - Yue, Qingrui T1 - Shear capacity of flexural strengthened reinforced concrete structures with CFRP materials T2 - Advances in FRP Composites in Civil Engineering - Proceedings of the 5th International Conference on FRP Composites in Civil Engineering (CICE 2010), Sep 27-29, 2010, Beijing, China N2 - By enlarging the flexural capacity of reinforced concrete structures with externally bonded CRFP materials the shear behavior is also affected. To evaluate this effect shear tests on flexural strengthened reinforced concrete beams were carried out. Half of the tests were done with externally bonded CFRP-strips and the other half with near surface mounted reinforcement. Based on these tests and the EC2 approach for the shear force was checked. KW - Concrete Beam KW - Shear Capacity KW - Shear Reinforcement KW - Shear Span KW - CFRP Strip Y1 - 2011 SN - 978-3-642-17486-5 SN - 978-3-642-17487-2 U6 - https://doi.org/10.1007/978-3-642-17487-2_175 PB - Springer CY - Berlin ; Heidelberg ER - TY - GEN A1 - Meißner, Jonathan A1 - Schermer, Detleff A1 - Amberger, Franziska A1 - Hofmann, Philipp ED - Milani, Gabriele ED - Ghiassi, Bahman T1 - Eccentric partial compression tests on wall test specimens T2 - 18th International Brick and Block Masonry Conference : Proceedings of IB2MaC 2024 Volume 2, 21.-24. July 2024, Birmingham N2 - Within the scope of this work, the objective was to transfer the stress situations resulting at the exterior wall-floor joint as partial area loads to wall test specimens. The actual load-bearing capacities of highly thermally insulating plane clay unit masonry are to be quantified and compared with the calculated load-bearing capacities based on the unconfined stress-strain relationship and the linear-elastic, quasi-ductile and rigid-plastic material behaviour. In order to record also the deformations and compression at cross-section level directly in the load application area as well as the curvatures at system level, the deformations of all test specimens are documented by means of optical deformation measurement (digital image correlation). In this way, not only the load-bearing capacity but also, in particular, the stress resp. Strain distribution and stress redistributions as well as the experimental moment-curvature relationship can be quantified for the further analytical considerations and evaluations. Accordingly, it can be determined for all eccentric partial area loads that, regardless of the loading situation, higher load bearing capacities are achieved both compared to the calculated bearing capacity and based on a rigid-plastic material behaviour. Especially in the case of the loading situation at the bottom of the walls with partially supported floors, the activation of the unloaded cross-sectional zone at the load transfer can be shown very well based on the photogrammetrically determined cross-sectional compression. The decoupling initiated by the local discontinuity of the stress-strain state occurs only after the rigid-plastic cross-sectional bearing capacity is reached. Y1 - 2025 SN - 978-3-031-73309-3 U6 - https://doi.org/10.1007/978-3-031-73310-9_16 VL - 2025 SP - 223 EP - 238 PB - Springer ER - TY - CHAP A1 - Hofmann, Philipp A1 - Schermer, Detleff A1 - Amberger, Franziska A1 - Meißner, Jonathan ED - Ghiassi, Bahman ED - Milani, Gabriele T1 - Experimental investigation at the exterior wall-floor joint with partially supported slabs T2 - 18th International Brick and Block Masonry Conference : Proceedings of IB2MaC 2024 Volume 2, 21.-24. July 2024, Birmingham N2 - The objective of the extensive experimental investigations at the exterior wall-floor joint on a scale of 1:1 on highly thermally insulating clay unit masonry was to record the interaction between the acting axial force and the resulting slab rotation as a result of defined slab fixed end moments. The focus of this test series was on the influence of the nonlinear system behaviour at different axial force-moment combinations caused by the gaping of the horizontal joints as well as the contact zone between slab and masonry. With knowledge of the moment-rotation interaction as a function of the axial force of the wall, a numerical model can be developed with regard to the nonlinear system behaviour. Since the angle of rotation of the slab is of major importance in this respect, the structural design of a reinforced concrete slab is dispensed with in the test and replaced by a flexurally rigid solid steel bracket. This has the decisive advantage that the rotation of the steel bracket can be precisely detected by means of optical deformation measurement (digital image correlation) and directly assigned to the existing axial force-moment combinations. The evaluation of the tests has shown that the dominant nonlinear effect is essentially due to the gaping of the horizontal joints in the exterior wall-floor joint. During the test execution, the proportionality limit between the bracket moment and the bracket rotation could be successively increased with increasing load level regardless of the previous nonlinear system behaviour. Y1 - 2025 SN - 978-3-031-73309-3 U6 - https://doi.org/10.1007/978-3-031-73310-9_18 SP - 254 EP - 265 PB - Springer CY - Cham ER - TY - CHAP A1 - Meißner, Jonathan A1 - Schermer, Detleff A1 - Amberger, Franziska A1 - Hofmann, Philipp ED - Milani, Gabriele ED - Ghiassi, Bahman T1 - Experimental investigations on the influence of eccentric load application on the load bearing capacity of clay unit masonry walls T2 - 18th International Brick and Block Masonry Conference : Proceedings of IB2MaC 2024 Volume 2, 21.-24. July 2024, Birmingham N2 - For the analysis of centric and double-eccentric wall compression tests, a comprehensive database of different highly thermally insulating clay unit types is being compiled for the first time. The objective of the analysis is, on the one hand, to characterise the load-deformation behaviour of highly thermally insulating clay unit masonry and, on the other hand, to analyse the resulting stress distribution at the cross-section level. In addition, the influence of the increasing load inclination angle with decreasing test specimen slenderness is also shown. With regard to the wall compression tests under double-eccentric loading, the effects caused by the load inclination become obvious and lead to an average reduction of the load-bearing capacity of 41% compared to the centric compression tests. Furthermore, an opposite effect can also be observed with regard to the generally known interaction between decreasing specimen slenderness and increasing load-bearing capacity. According to this, lower load-bearing capacities result with constant eccentricity and decreasing slenderness, so that a back calculation to a uniform slenderness ratio with the relevant normalisation functions is not possible. The reason for this is due to the linearly increasing load inclination angle and the resulting increasing shear stress within the transverse webs. Y1 - 2025 SN - 978-3-031-73309-3 U6 - https://doi.org/10.1007/978-3-031-73310-9_17 SP - 239 EP - 253 PB - Springer CY - Cham ER - TY - CHAP A1 - Schermer, Detleff A1 - Meißner, Jonathan A1 - Amberger, Franziska A1 - Hofmann, Philipp ED - Ghiassi, Bahman ED - Milani, Gabriele T1 - Numerical investigation for nonlinear internal forces at the exterior wall-floor joints T2 - 18th International Brick and Block Masonry Conference : Proceedings of IB2MaC 2024 Volume 2, 21.-24. July 2024, Birmingham N2 - The objective of the presented work is the analysis of the numerically determined nodal moments at the exterior wall-floor joint compared to the linear-elastic calculation of a frame section according to Annex C of Eurocode 6, Part 1–1 (EN 1996-1-1). The focus of the comparative analysis is the influence of the structural nonlinearity of the exterior wall-floor joint as well as the acting wall axial force, which are explicitly captured in the FE model in contrast to the linear-elastic frame section. In particular, the contact zone is of special importance for partially supported floor and the associated discontinuous stress distribution between the exterior wall and slab. The reason for this is the fact that the transition zone between the masonry wall and the slab behaves in a highly nonlinear manner due to the lack of tensile strength. The related eccentricity e/a required for the ultimate limit state design is thus significantly influenced by the interaction of the axial force and the resulting joint rotations. Y1 - 2025 SN - 978-3-031-73310-9 U6 - https://doi.org/10.1007/978-3-031-73310-9_19 SP - 266 EP - 279 PB - Springer CY - Cham ER - TY - CHAP A1 - Schermer, Detleff ED - Albert, Andrej T1 - Kapitel 7A: Mauerwerksbau T2 - Schneider Bautabellen für Ingenieure : mit Berechnungshinweisen und Beispielen Y1 - 2024 SN - 978-3-8462-1479-4 PB - Reguvis CY - Köln ET - 26. aktualisierte Auflage ER - TY - CHAP A1 - Hofmann, Philipp A1 - Schermer, Detleff A1 - Amberger, Franziska A1 - Meißner, Jonathan ED - Ghiassi, Bahman ED - Milani, Gabriele T1 - Substitute test method for the local load bearing capacity of masonry with partially supported slabs T2 - 18th International Brick and Block Masonry Conference : Proceedings of IB2MaC 2024 Volume 2, 21.-24. July 2024, Birmingham N2 - With increasing thermal insulation requirements and resource-efficient construction methods, demands on building exterior walls are rising. Monolithic exterior walls, devoid of additional insulation, require meticulous planning and execution of the exterior wall-floor joint. Besides addressing building physics, fire safety, and sustainable construction, this detail must meet structural analysis standards. The joint’s load-bearing capacity hinges on both the masonry wall and slab loads. Masonry walls primarily bear loads from slabs and roof structures. However, slab loads induce rotation, adding bending stress to the masonry. Bending transmission depends on structural design, material parameters, and axial force, creating parameter interactions. To scrutinize various products and design variants regarding contact stiffness, load distribution, and stress concentrations, the Laboratory for Structural Engineering at the University of Applied Sciences (OTH) in Regensburg, Germany developed specific testing methods. These methods realistically capture load redistribution effects based on perforation patterns and quantify potential loadbearing reserves. Additionally, optimising design regulations based on results can accurately describe masonry’s load-deformation behaviour. Y1 - 2025 SN - 978-3-031-73310-9 U6 - https://doi.org/10.1007/978-3-031-73310-9_21 SP - 294 EP - 307 PB - Springer CY - Cham ER -