TY - JOUR A1 - Schermer, Detleff T1 - Extrem beansprucht - der Sockelbereich monolithischer Wandkonstruktionen JF - BauPlaner Special Y1 - 2020 IS - 9 SP - 6 EP - 7 PB - Schiele & Schön CY - Berlin ER - TY - JOUR A1 - Schermer, Detleff T1 - Lösungen im Bereich Statik JF - Deutsches Ingenieurblatt Y1 - 2018 VL - 25 IS - 10 SP - 6 EP - 7 PB - Schiele & Schön CY - Berlin ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Quantz, Hilmar T1 - Veränderung der Tragstrukturen von historischen Mauerwerksgewölben am Beispiel der Erschließung Wilhelmsburg in Ulm T2 - Mauerwerk-Kalender N2 - Im Rahmen der horizontalen und vertikalen Erschließung der denkmalgeschützten Wilhelmsburg als Teil der Ulmer Bundesfestung waren erhebliche Eingriffe in die historische Gewölbetragstruktur erforderlich. Hierbei mussten die Kräfte aus den in sich kurzgeschlossenen Gewölbereihen aus gebrochenem Kalksteinmauerwerk umgelagert bzw. umgeleitet werden. In dem Beitrag werden Vorgehensweise, Planung, Berechnungsmethodik und Ausführung sowie die Besonderheiten bezüglich der Gestaltungsanforderungen unter Denkmalschutz erläutert. Insbesondere wird auf die Berechnungen und Ausführungen der hier relevanten Bauzustände eingegangen. Auch die spezielleren Anforderungen an die Gründung der neuen eingebauten Bauteile mit hohen Lasten werden vertieft. KW - Gewölbe KW - Mauerwerk KW - Tragverhalten KW - Bundesfestung Ulm Y1 - 2021 SN - 978-3-433-03293-0 U6 - https://doi.org/10.1002/9783433610732.ch5 SP - 163 EP - 195 PB - Ernst&Sohn, a Wiley brand CY - Berlin ER - TY - CHAP A1 - Zilch, Konrad A1 - Niedermeier, Roland A1 - Finckh, Wolfgang T1 - Geklebte Verstärkung mit CFK-Lamellen und Stahllaschen T2 - Beton-Kalender 2021 KW - Lamelle KW - Kohlenstofffaserverstärkter Kunststoff KW - Klebeverbindung KW - Verstärkung Y1 - 2021 SN - 978-3-433-03301-2 U6 - https://doi.org/10.1002/9783433610206.ch12 SP - 1008 EP - 1105 CY - Berlin ER - TY - CHAP A1 - Schermer, Detleff ED - Zilch, Konrad ED - Diederichs, Claus Jürgen ED - Beckmann, Klaus J. ED - Gertz, Carsten ED - Malkwitz, Alexander ED - Moormann, Christian ED - Urban, Wilhelm ED - Valentin, Franz T1 - Bemessung von Mauerwerk T2 - Handbuch für Bauingenieure N2 - Die Bemessung von Mauerwerk deckt neben der Tragfähigkeit auch den Nachweis der Gebrauchstauglichkeit ab. Im Beitrag werden die Grundanforderungen und Hintergründe der Bemessung von Mauerwerk dargelegt und die Lösungen nach den aktuellen Vorschriften von Eurocode 6 und dem Nationalen Anhang erläutert. KW - Bemessung KW - Drucktragfähigkeit KW - Eurocode 6 KW - Genaueres Verfahren KW - Schnittgrößenermittlung KW - Schub KW - Spannungsblock KW - Unbewehrtes Mauerwerk KW - Vereinfachtes Verfahren Y1 - 2021 SN - 978-3-658-21749-5 U6 - https://doi.org/10.1007/978-3-658-21749-5_66-1 VL - 6 SP - 1 EP - 31 PB - Springer Fachmedien CY - Wiesbaden ER - TY - JOUR A1 - Schermer, Detleff T1 - The simplified calculation method of DIN EN 1996-3 in practice JF - Mauerwerk N2 - The design and detailing of masonry buildings was usually undertaken in the past using the simplified procedure in Section 6 of DIN 1053-1 (1996-11). With the changeover to the new European code, a new procedure has been made available with the simplified calculation method of DIN EN 1996-3, which promises similarly simple and safe handling for the user. The practical implementation of this new code has been underway for some time. The article investigates the standard design cases and explains the innovations and alterations compared to DIN 1053-1. T2 - Das vereinfachte Bemessungsverfahren von DIN EN 1996-3 in der Praxis Y1 - 2015 U6 - https://doi.org/10.1002/dama.201500682 VL - 19 IS - 6 SP - 471 EP - 478 PB - Wiley ER - TY - CHAP A1 - Obergrießer, Mathias A1 - Kraus, Michael A. ED - Schermer, Detleff ED - Brehm, Eric T1 - Digitale Transformation im Bauwesen – Von der Theorie zur Anwendung T2 - Mauerwerk-Kalender 2022: Fassadengestaltung, Bauphysik, Innovationen N2 - Dieser Beitrag führt zunächst in die digitale Transformation (DT) des Bauwesens und deren wesentliche Methoden wie BIM, digitaler Zwilling etc. ein. Zur Erzielung eines begriff‌lichen und semantischen Verständnisses werden die Definitionen zudem an Anwendungsbeispielen veranschaulicht. Neben den Gründen für die DT werden der Status quo sowie der Weg vom analogen Planen und Bauen zur Vision „Planen und Bauen~4.0“ dargestellt. Kernelemente sind verschiedene Ansatzpunkte, Entscheidungshilfen und Schlüsse zur Begegnung der technischen und adaptiven Herausforderungen der DT auf Unternehmer‑, aber auch Hochschulniveau. Insbesondere der Faktor Mensch und dessen humane wie technische Kollaborations- und Vernetzungsfähigkeit wird in diesem Beitrag Rechnung getragen. Abschließend wird neben einer Zusammenfassung der dargestellten Inhalte zudem ein Ausblick für die DT im Bauwesen bis hin zum Einsatz von Robotik und KI für den im nächsten Jahr erscheinenden zweiten Teil dieses Beitrags gegeben. Y1 - 2022 SN - 978-3-433-03356-2 U6 - https://doi.org/10.1002/9783433611029.ch16 VL - 47 SP - 499 EP - 519 PB - Ernst & Sohn CY - Berlin ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Schmitt, Alexander A1 - Zilch, Konrad T1 - Example 1: Strengthening a slab with externally bonded CFRP strips T2 - Commentary on the DAfStb guideline "Strengthening of concrete members with adhesively bonded reinforcement" with examples KW - Betonbauteil KW - Bewehrung KW - Lamelle KW - Kohlenstofffaserverstärkter Kunststoff KW - Kleben KW - Tragfähigkeit KW - Bemessung KW - Gewirke KW - Kohlenstoffaser Y1 - 2014 SN - 978-3-410-65255-7 SN - 0171-7197 SP - 47 EP - 68 PB - Beuth CY - Berlin ; Wien ; Zürich ER - TY - CHAP A1 - Finckh, Wolfgang ED - Zilch, Konrad T1 - Verstärken mit geklebter Bewehrung - Sachstand und neue Entwicklungen T2 - 13. Münchener Massivbau Seminar 2009 Y1 - 2009 PB - Förderverein Massivbau der TU München CY - München ER - TY - JOUR A1 - Schermer, Detleff T1 - Hybrid testing of masonry structures subjected to seismic loading JF - Mauerwerk N2 - The combination of experiments and numeric description in a test makes it possible to realistically investigate almost any type of system subjected to dynamic loading without requiring the extremely expensive device of a shaking table. With the numeric approach it is possible to examine the behaviour of even very large and complex structures, thus reducing the experimental investigations to the essential part of the system – for example, bracing masonry walls. This test method has proved to be very helpful, particularly for the investigation of seismic loading, and it allows the synchronous examination of several force and displacement variables (horizontal, vertical, rotational). A new laboratory is presented for the investigation of full-scale building structures up to three storeys high. Die Kombination von Experiment und numerischer Beschreibung innerhalb eines Versuches erlaubt die realitätsnahe Untersuchung annähernd beliebiger Systeme unter dynamischen Beanspruchungen, ohne den extrem hohen Aufwand von Rütteltischen zu erfordern. Durch die Numerik können auch sehr große und komplexe Strukturen mit ihrem Verhalten erfasst werden, wobei sich die versuchsmäßige Untersuchung auf den maßgebenden Teil des Systems – beispielsweise aussteifende Mauerwerkswände – beschränken kann. Insbesondere für Erdbebenbeanspruchung hat sich die Versuchsmethode sehr gut bewährt und es können mehrere Kraft- und Verschiebungsgrößen (horizontal, vertikal, Rotation) synchron behandelt werden. Für die Untersuchung an vollmaßstäblichen Gebäudestrukturen bis zu drei Geschossen wird ein neues Labor vorgestellt. T2 - Hybride Versuche an Mauerwerkskonstruktionen unter Erdbebenbeanspruchung Y1 - 2014 U6 - https://doi.org/10.1002/dama.201400625 SN - 1437-1022 SN - 1432-3427 VL - 18 IS - 3-4 SP - 206 EP - 212 PB - Ernst ; WILEY CY - Berlin ; Weinheim ER - TY - CHAP A1 - Zilch, Konrad A1 - Finckh, Wolfgang ED - Nothnagel, Reinhard ED - Twelmeier, Heiko T1 - Mechanischer Hintergrund der Wirkungsweise der aufgeklebten Bewehrung T2 - Baustoff und Konstruktion - Festschrift zum 60. Geburtstag von Harald Budelmann N2 - Die Wirkungsweise einer aufgeklebten Biegezugverstärkung kann aufgrund der umfangreichen Forschung der letzten Jahrzehnte nun gut beschrieben werden. Eine wesentliche Rolle spielt hierbei der Verbund zwischen Beton und aufgeklebter Bewehrung, welcher durch die mäßige Zugfestigkeit der oberflächennahen Betonschichten charakterisiert wird. Dieser Aufsatz gibt einen historisch orientierten Abriss der Entwicklung des derzeitigen Kenntnisstands zur mechanischen Beschreibung der Wirkungsweise der aufgeklebten Bewehrung an. Dazu wird zunächst auf das Verbundverhalten der aufgeklebten Bewehrung sowie die übertragung auf das Bauteil und danach auf den weiteren Einfluss des Verbundes auf das Bauteilverhalten eingegangen. Y1 - 2013 SN - 978-3-642-29572-0 SN - 978-3-642-29573-7 U6 - https://doi.org/10.1007/978-3-642-29573-7_26 SP - 243 EP - 261 PB - Springer CY - Wiesbaden ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Schmitt, Alexander A1 - Zilch, Konrad ED - Zilch, Konrad T1 - Beispiel 2: Verstärkung einer Platte mit in Schlitze verklebten CFK-Lamellen T2 - Erläuterungen und Beispiele zur DAfStb-Richtlinie "Verstärken von Betonbauteilen mit geklebter Bewehrung" KW - Betonbauteil KW - Bewehrung KW - Lamelle KW - Kohlenstofffaserverstärkter Kunststoff KW - Kleben KW - Tragfähigkeit KW - Bemessung KW - Gewirke KW - Kohlenstoffaser Y1 - 2013 SN - 978-3-410-65245-8 SN - 0171-7197 SP - 65 EP - 82 PB - Beuth CY - Berlin ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Schmitt, Alexander A1 - Zilch, Konrad ED - Zilch, Konrad T1 - Beispiel 1: Verstärkung einer Platte mit aufgeklebten CFK-Lamellen T2 - Erläuterungen und Beispiele zur DAfStb-Richtlinie "Verstärken von Betonbauteilen mit geklebter Bewehrung" KW - Betonbauteil KW - Bewehrung KW - Lamelle KW - Kohlenstofffaserverstärkter Kunststoff KW - Kleben KW - Tragfähigkeit KW - Bemessung KW - Gewirke KW - Kohlenstoffaser Y1 - 2013 SN - 978-3-410-65245-8 SN - 0171-7197 SP - 45 EP - 64 PB - Beuth CY - Berlin ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Niedermeier, Roland ED - Zilch, Konrad T1 - Beispiel 4: Verstärkung einer Stahlbetonstütze durch Umwicklung T2 - Erläuterungen und Beispiele zur DAfStb-Richtlinie "Verstärken von Betonbauteilen mit geklebter Bewehrung" KW - Betonbauteil KW - Bewehrung KW - Lamelle KW - Kohlenstofffaserverstärkter Kunststoff KW - Kleben KW - Tragfähigkeit KW - Bemessung KW - Gewirke KW - Kohlenstoffaser Y1 - 2013 SN - 978-3-410-65245-8 SN - 0171-7197 SP - 109 EP - 119 PB - Beuth CY - Berlin ER - TY - CHAP A1 - Zilch, Konrad A1 - Finckh, Wolfgang ED - Fuchs, Werner T1 - Erweiterung der Verbundmodelle auf eingeschlitzte Bewehrung T2 - Befestigungstechnik, Bewehrungstechnik und ... Teil 2 : Rolf Eligehausen zum 70. Geburtstag Y1 - 2012 SN - 978-3-8982-1208-3 SP - 577 EP - 590 PB - ibidem-Verl. CY - Stuttgart ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Niedermeier, Roland A1 - Schmitt, Alexander A1 - Zilch, Konrad T1 - Example 3: Strengthening a T-beam with externally bonded CFRP strips T2 - Commentary on the DAfStb guideline "Strengthening of concrete members with adhesively bonded reinforcement" with examples KW - Betonbauteil KW - Bewehrung KW - Lamelle KW - Kohlenstofffaserverstärkter Kunststoff KW - Kleben KW - Tragfähigkeit KW - Bemessung KW - Gewirke KW - Kohlenstoffaser Y1 - 2014 SN - 978-3-410-65255-7 SN - 0171-7197 SP - 115 EP - 125 PB - Beuth CY - Berlin ; Wien ; Zürich ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Schmitt, Alexander A1 - Zilch, Konrad T1 - Example 2: Strengthening a slab with near surface mounted CFRP strips T2 - Commentary on the DAfStb guideline "Strengthening of concrete members with adhesively bonded reinforcement" with examples KW - Betonbauteil KW - Bewehrung KW - Lamelle KW - Kohlenstofffaserverstärkter Kunststoff KW - Kleben KW - Tragfähigkeit KW - Bemessung KW - Gewirke KW - Kohlenstoffaser Y1 - 2014 SN - 978-3-410-65255-7 SN - 0171-7197 SP - 69 EP - 86 PB - Beuth CY - Berlin ; Wien ; Zürich ER - TY - CHAP A1 - Zilch, Konrad A1 - Niedermeier, Roland A1 - Finckh, Wolfgang ED - Bergmeister, Konrad ED - Fingerloos, Frank ED - Wörner, Johann-Dietrich T1 - Verstärken von Betonbauteilen mit geklebter Bewehrung - Erläuterungen zur DAfStb-Richtlinie T2 - Beton-Kalender 2013 : Lebensdauer und Instandsetzung, Brandschutz Y1 - 2014 SN - 978-3-433-60546-2 U6 - https://doi.org/10.1002/9783433602591.ch6 SP - 469 EP - 552 PB - Ernst & Sohn CY - Berlin ER - TY - CHAP A1 - Zilch, Konrad A1 - Niedermeier, Roland A1 - Finckh, Wolfgang ED - Oehlers, Deric John ED - Griffith, Michael C. ED - Seracino, R. T1 - Guideline for the Performance and Interpretation of Bond Tests on Concrete Specimens with Externally Bonded CFRP Strips T2 - Proceedings of the 9th International Symposium on Fibre Reinforced Polymers in Reinforced Concrete Structures (FRPRCS-9), 13.07. - 15.07.2009, Sydney, Australia Y1 - 2009 SN - 978-0-9806755-0-4 PB - [Univ ersity of Adelaide] CY - [Adelaide] ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Zilch, Konrad A1 - Niedermeier, Roland T1 - Verstärken mit Kohlenstofffaserverbundwerkstoffen T2 - DAfStb-Forschungskolloquium: Beiträge zum 50. Forschungskolloquium des DAfStb am 8./9. Oktober 2009 an der Technischen Universität München Y1 - 2009 SP - 35 EP - 44 CY - Berlin ER - TY - CHAP A1 - Zilch, Konrad A1 - Finckh, Wolfgang T1 - Verstärkung von Betonkonstruktionen mit CFK-Werkstoffen T2 - Proceedings / 53. BetonTage : building the future Y1 - 2009 SP - 174 PB - Bauverl. CY - Gütersloh ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Zilch, Konrad A1 - Ellinger, Mathias ED - Motavalli, Masoud T1 - Evaluating the bond stress relationship of externally bonded CFRP-strips at the intermediate crack element T2 - Smart monitoring, assessment and rehabilitation of civil structures : proceedings of SMAR 2011, First Middle East Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures, Dubai, UAE, 8-10 February 2011 at AUD, American University in Dubai UAE N2 - When reinforced concrete is strengthened by using externally bonded CFRP strips it is not sufficient to perform checks just for the end anchorages. The bond forces must be transferred where the load is applied. These bond forces may be transferred by the elements in between flexural cracks which are mainly influenced by the bond behavior of the internal and external reinforcing. Therefore the models which were derived from end anchorage tests must be expanded to include other effects as well. These models were first described theoretically by the differential equation of bond and a bilinear bond stress slippage relationship. To evaluate this theoretically derived relationship numerous experiments on the intermediate crack elements where conducted. In this paper, an evaluation of these experiments in two different ways is shown. The one evaluation is carried out only on the fracture force, the other analysis also takes the slippage occurred in the intermediate crack element tests into account. With both evaluations it can be shown, that besides the previously scheduled bilinear bond approach additional friction effects between the already decoupled fracture surfaces of the bonded strips occur. Y1 - 2011 UR - https://data.smar-conferences.org/SMAR_2011_Proceedings/papers/97.pdf SN - 978-3-905594-58-4 SP - 1 EP - 9 PB - EMPA CY - [Dübendorf] ET - 1 CD-ROM ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Zilch, Konrad ED - Ye, Lieping ED - Feng, Peng ED - Yue, Qingrui T1 - Evaluation of the bond behavior at the intermediate crack element with a special test procedure T2 - Advances in FRP Composites in Civil Engineering : Proceedings of the 5th International Conference on FRP Composites in Civil Engineering (CICE 2010), Sep 27-29, 2010, Beijing, China N2 - The bond behavior of externally bonded reinforcement is one main parameter for the load bearing capacity of strengthened reinforced concrete structures. Because of the low bond force transfer at the outmost bending crack, the bond forces have also been transferred to elements between the cracks in order to effectively utilize the permissible stress of the CFRP strip. Two different experimental series on the bond behavior on the intermediate crack element were carried out. Small tests on an idealized intermediate crack element were made to evaluate the bond stress increase. In the second series parts of a structural element, which had the length of an intermediate crack element were tested to find out about other effects which only occur in the structural element. Based on these experimental data and the differential equation of the sway bond a new concept for the bond behavior of externally bonded reinforcement has been found out. Y1 - 2011 SN - 978-3-642-17486-5 SN - 978-3-642-17487-2 U6 - https://doi.org/10.1007/978-3-642-17487-2_111 SP - 517 EP - 520 PB - Springer CY - Berlin ; Heidelberg ER - TY - CHAP A1 - Zilch, Konrad A1 - Niedermeier, Roland A1 - Finckh, Wolfgang ED - Motavalli, Masoud T1 - New German guideline for strengthening concrete structures with adhesive bonded reinforcement T2 - Smart monitoring, assessment and rehabilitation of civil structures, Proceedings of SMAR 2011, First Middle East Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures, Dubai, UAE, 8 - 10 February 2011 at AUD, American University in Dubai UAE Y1 - 2011 SN - 978-3-905594-58-4 PB - EMPA ET - 1 CD-ROM Ill., graph. Darst. 1 Buch (212 S.) ER - TY - CHAP A1 - Gläser, Christian A1 - Jung-Saeng, A. A1 - Finckh, Wolfgang T1 - Recent developments of spliced segmental griders using enhanced post tensioning systems T2 - Third international fib congress incorporating the PCI annual convention and bridge conference 2010, May 29-June 2, 2010, Washington, D.C. Y1 - 2010 PB - Precast/Prestressed Concrete Institute, CY - Chicago, IL ET - 1 DVD-ROM ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Zilch, Konrad T1 - Influence of the curvature on the bond force transfer of EBR T2 - 10th International Symposium on Fiber-Reinforced Polymer Reinforcement for Concrete Structures 2011 : Tampa, Florida, USA, 2 - 4 April 2011 KW - Beton KW - Faserverstärkter Kunststoff Y1 - 2011 SN - 978-1-61839-203-9 PB - Curran CY - Red Hook, NY ER -