TY - GEN A1 - Schermer, Detleff ED - Schermer, Detleff ED - Brehm, Eric T1 - Mauerwerk-Kalender 2021 BT - Kunststoffverankerungen, Digitalisierung im Mauerwerksbau KW - Mauerwerksbau KW - Mauerwerk KW - Kunststoffbauteil Y1 - 2021 SN - 978-3-433-03293-0 U6 - https://doi.org/10.1002/9783433610732 VL - 2021 PB - Ernst & Sohn GmbH CY - Berlin ET - 46 ER - TY - GEN A1 - Schermer, Detleff ED - Schermer, Detleff ED - Brehm, Eric T1 - Mauerwerk-Kalender 2022 BT - Fassadengestaltung, Bauphysik, Innovationen KW - Mauerwerksbau KW - Mauerwerk KW - Kunststoffbauteil Y1 - 2022 SN - 978-3-433-03356-2 U6 - https://doi.org/10.1002/9783433611029 VL - 47 PB - Ernst & Sohn GmbH CY - Berlin ER - TY - JOUR A1 - Schermer, Detleff A1 - Meyer, Udo A1 - Lutman, Marjana A1 - Triller, Petra T1 - Shear tests on full scale storey-height specimens constructed with thermally insulating clay unit masonry with thin-layer mortar JF - Mauerwerk N2 - The paper presents results of a series of 6 in-plane shear tests on storey-height clay unit masonry panels [1] with thin-layer mortar, carried out in addition to previous test campaigns [2], [3], and [4]. The walls were constructed with unfilled thermally insulating clay units with a thermal conductivity of lambda = 0.09 W/(m . K). The current design rules for clay unit masonry according to DIN EN 1996-1-1/NA [5] are conservative compared to the presented test results for thermally insulating clay unit masonry. KW - clay units KW - design KW - in-plane shear KW - test methods KW - thin-layer mortar KW - WALLS Y1 - 2019 U6 - https://doi.org/10.1002/dama.201900025 SN - 1432-3427 VL - 23 IS - 6 SP - 378 EP - 386 PB - Ernst & Sohn ER - TY - JOUR A1 - Schermer, Detleff A1 - Meyer, Udo Joachim A1 - Lutman, Marjana A1 - Triller, Petra T1 - Shear tests on highly thermal insulating clay unit masonry walls with thin layer mortar JF - Mauerwerk N2 - The paper presents the results of a series of 6 shear tests on full scale highly thermal insulating clay unit masonry walls. The walls consisted of units with large voids filled with mineral wool with a thermal conductivity of lambda= 0,07 W/(m . K). The aim of the investigations was the verification of the in-planeshear resistance of this type of thermal insulating clay unit masonry in addition to the tests reported in [1]. The current design rules for clay unit masonry in DIN EN 1996-1-1/NA are rather conservative compared to the test results for thermal insulating units. KW - clay units KW - design KW - experimental testing KW - masonry with thin layer mortar KW - shear KW - thin layer mortar Y1 - 2019 U6 - https://doi.org/10.1002/dama.201900007 SN - 1432-3427 VL - 23 IS - 3 SP - 160 EP - 169 PB - Ernst & Sohn CY - Berlin ER - TY - JOUR A1 - Schermer, Detleff T1 - Design according to Eurocode 6 in practice JF - Mauerwerk N2 - For the structural design of masonry according to Eurocode 6 with the associated German national annex, the simplified method and the further simplified calculation method in Annex A are available. These procedures provide tools that can be used in practice to design standard cases quickly and easily. One feature of the verification of masonry walls under compressive loading is that no bending moments in the walls have to be determined as part of the determination of section forces and moments since the verification of the load-bearing capacity of the wall is based solely on the acting vertical force. The effects of floor end restraint and buckling are dealt with by simple equations. One new feature of verification according to Eurocode 6 is that the effect of partially supported floors on the load-bearing capacity of the wall can be included directly. The code is compact and simple to use and the further simplified calculation method is predestined for verification by manual calculation. T2 - Bemessung nach Eurocode 6 in der Praxis KW - buckling KW - calculation method KW - construction detailing KW - Eurocode 6 KW - masonry KW - structural design KW - floor bearing depth KW - further simplified Y1 - 2017 U6 - https://doi.org/10.1002/dama.201700719 SN - 1432-3427 SN - 1437-1022 VL - 21 IS - 1 PB - Ernst & Sohn, a Wiley brand ER - TY - JOUR A1 - Schermer, Detleff T1 - Bemessungsbeispiele - Nachweisführung nach dem vereinfachten Verfahren JF - Mauerwerk N2 - Die Regelungen im vereinfachten Verfahren von Eurocode 6, Teil 3 [4] mit dem zugehörigen Nationalen Anhang erlauben es, in wenigen Schritten rechnerische Nachweise von Mauerwerksbauteilen durchzuführen. Anhand mehrerer Bauteilnachweise aus der Praxis wird im Folgenden die Nachweisführung nach dem vereinfachten Verfahren dargestellt. Es ist erkennbar, dass bei Einhaltung der Anforderungen an das vereinfachte Verfahren sich die rechnerische Nachweisführung sehr einfach gestaltet und der größte Zeitaufwand in der Lastermittlung der einzelnen Bauteile liegt. Eine weitere Vereinfachung, die jedoch etwas stärkere Einschränkungen des Anwendungsbereiches bedingt, ist durch das im Anhang A angegebene sog. stark vereinfachte Verfahren gegeben. Y1 - 2014 U6 - https://doi.org/10.1002/dama.201400638 SN - 1432-3427 VL - 18 IS - 6 SP - 365 EP - 370 PB - Ernst & Sohn, a Wiley brand ER - TY - JOUR A1 - Schermer, Detleff T1 - The simplified calculation method of DIN EN 1996-3 in practice JF - Mauerwerk N2 - The design and detailing of masonry buildings was usually undertaken in the past using the simplified procedure in Section 6 of DIN 1053-1 (1996-11). With the changeover to the new European code, a new procedure has been made available with the simplified calculation method of DIN EN 1996-3, which promises similarly simple and safe handling for the user. The practical implementation of this new code has been underway for some time. The article investigates the standard design cases and explains the innovations and alterations compared to DIN 1053-1. T2 - Das vereinfachte Bemessungsverfahren von DIN EN 1996-3 in der Praxis Y1 - 2015 U6 - https://doi.org/10.1002/dama.201500682 VL - 19 IS - 6 SP - 471 EP - 478 PB - Wiley ER - TY - JOUR A1 - Schermer, Detleff A1 - Schmalz, Jonathan A1 - Meyer, Udo A1 - Gams, Matija A1 - Lutman, Marjana A1 - Triller, Petra T1 - Shear tests on thermal insulating clay unit masonry walls with thin layer mortar JF - Mauerwerk N2 - The paper presents the results of 20 shear tests on full scale thermal insulating clay unit masonry walls. The types of units used (units with large chambers filled with mineral wool pads and units with small corings filled with mineral wool granulate) as well as the tested wall geometries and vertical loads are representative of the most common wall constructions currently used in housing in Germany. The aim of the investigations was the verification of the shear -resistance of thermal insulating clay unit masonry under realistic conditions and comparison with the design rules in the codes and national technical approvals. The current design rules for clay unit masonry in DIN EN 1996-1-1/NA are rather conservative compared to the test results for thermal insulating units. KW - design KW - experimental testing KW - high precision clay masonry units KW - masonry with thin layer mortar KW - shear KW - thin layer mortar Y1 - 2018 U6 - https://doi.org/10.1002/dama.201800028 VL - 22 IS - 6 SP - 385 EP - 398 PB - Ernst & Sohn, a Wiley brand ER - TY - CHAP A1 - Zilch, Konrad A1 - Niedermeier, Roland A1 - Finckh, Wolfgang T1 - Geklebte Verstärkung mit CFK-Lamellen und Stahllaschen T2 - Beton-Kalender 2021 KW - Lamelle KW - Kohlenstofffaserverstärkter Kunststoff KW - Klebeverbindung KW - Verstärkung Y1 - 2021 SN - 978-3-433-03301-2 U6 - https://doi.org/10.1002/9783433610206.ch12 SP - 1008 EP - 1105 CY - Berlin ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Quantz, Hilmar T1 - Veränderung der Tragstrukturen von historischen Mauerwerksgewölben am Beispiel der Erschließung Wilhelmsburg in Ulm T2 - Mauerwerk-Kalender N2 - Im Rahmen der horizontalen und vertikalen Erschließung der denkmalgeschützten Wilhelmsburg als Teil der Ulmer Bundesfestung waren erhebliche Eingriffe in die historische Gewölbetragstruktur erforderlich. Hierbei mussten die Kräfte aus den in sich kurzgeschlossenen Gewölbereihen aus gebrochenem Kalksteinmauerwerk umgelagert bzw. umgeleitet werden. In dem Beitrag werden Vorgehensweise, Planung, Berechnungsmethodik und Ausführung sowie die Besonderheiten bezüglich der Gestaltungsanforderungen unter Denkmalschutz erläutert. Insbesondere wird auf die Berechnungen und Ausführungen der hier relevanten Bauzustände eingegangen. Auch die spezielleren Anforderungen an die Gründung der neuen eingebauten Bauteile mit hohen Lasten werden vertieft. KW - Gewölbe KW - Mauerwerk KW - Tragverhalten KW - Bundesfestung Ulm Y1 - 2021 SN - 978-3-433-03293-0 U6 - https://doi.org/10.1002/9783433610732.ch5 SP - 163 EP - 195 PB - Ernst&Sohn, a Wiley brand CY - Berlin ER - TY - JOUR A1 - Schermer, Detleff T1 - Lösungen im Bereich Statik JF - Deutsches Ingenieurblatt Y1 - 2018 VL - 25 IS - 10 SP - 6 EP - 7 PB - Schiele & Schön CY - Berlin ER - TY - JOUR A1 - Schermer, Detleff T1 - Hybrid testing of masonry structures subjected to seismic loading JF - Mauerwerk N2 - The combination of experiments and numeric description in a test makes it possible to realistically investigate almost any type of system subjected to dynamic loading without requiring the extremely expensive device of a shaking table. With the numeric approach it is possible to examine the behaviour of even very large and complex structures, thus reducing the experimental investigations to the essential part of the system – for example, bracing masonry walls. This test method has proved to be very helpful, particularly for the investigation of seismic loading, and it allows the synchronous examination of several force and displacement variables (horizontal, vertical, rotational). A new laboratory is presented for the investigation of full-scale building structures up to three storeys high. Die Kombination von Experiment und numerischer Beschreibung innerhalb eines Versuches erlaubt die realitätsnahe Untersuchung annähernd beliebiger Systeme unter dynamischen Beanspruchungen, ohne den extrem hohen Aufwand von Rütteltischen zu erfordern. Durch die Numerik können auch sehr große und komplexe Strukturen mit ihrem Verhalten erfasst werden, wobei sich die versuchsmäßige Untersuchung auf den maßgebenden Teil des Systems – beispielsweise aussteifende Mauerwerkswände – beschränken kann. Insbesondere für Erdbebenbeanspruchung hat sich die Versuchsmethode sehr gut bewährt und es können mehrere Kraft- und Verschiebungsgrößen (horizontal, vertikal, Rotation) synchron behandelt werden. Für die Untersuchung an vollmaßstäblichen Gebäudestrukturen bis zu drei Geschossen wird ein neues Labor vorgestellt. T2 - Hybride Versuche an Mauerwerkskonstruktionen unter Erdbebenbeanspruchung Y1 - 2014 U6 - https://doi.org/10.1002/dama.201400625 SN - 1437-1022 SN - 1432-3427 VL - 18 IS - 3-4 SP - 206 EP - 212 PB - Ernst ; WILEY CY - Berlin ; Weinheim ER - TY - JOUR A1 - Schermer, Detleff T1 - Bemessung nach Eurocode 6 JF - Deutsches Ingenieurblatt / Bauplaner Y1 - 2016 UR - https://www.ingenieurbau-online.de/fachartikel/artikeldetail/bemessung-nach-eurocode-6 SN - 0946-2422 SN - 2365-192X IS - 9, Supplement SP - 14 EP - 15 PB - Schiele & Schön CY - Berlin ER - TY - CHAP A1 - Wegh, Niels A1 - Wagner, Marcus A1 - Gaudlitz, Daniel A1 - Finckh, Hermann A1 - Klein, Markus T1 - Numerical Simulation of Filling Process in Resin Transfer Molding T2 - 13th International Conference on Flow Processes in Composites Materials (FPCM-13), Kyoto, Japan Y1 - 2016 UR - https://www.fose1.plymouth.ac.uk/sme/fpcm/fpcm13/Abstracts/FPCM-13_extended_abstract_21.pdf ER - TY - CHAP A1 - Schermer, Detleff ED - Zilch, Konrad ED - Diederichs, Claus Jürgen ED - Beckmann, Klaus J. ED - Gertz, Carsten ED - Malkwitz, Alexander ED - Moormann, Christian ED - Urban, Wilhelm ED - Valentin, Franz T1 - Bemessung von Mauerwerk T2 - Handbuch für Bauingenieure N2 - Die Bemessung von Mauerwerk deckt neben der Tragfähigkeit auch den Nachweis der Gebrauchstauglichkeit ab. Im Beitrag werden die Grundanforderungen und Hintergründe der Bemessung von Mauerwerk dargelegt und die Lösungen nach den aktuellen Vorschriften von Eurocode 6 und dem Nationalen Anhang erläutert. KW - Bemessung KW - Drucktragfähigkeit KW - Eurocode 6 KW - Genaueres Verfahren KW - Schnittgrößenermittlung KW - Schub KW - Spannungsblock KW - Unbewehrtes Mauerwerk KW - Vereinfachtes Verfahren Y1 - 2021 SN - 978-3-658-21749-5 U6 - https://doi.org/10.1007/978-3-658-21749-5_66-1 VL - 6 SP - 1 EP - 31 PB - Springer Fachmedien CY - Wiesbaden ER - TY - JOUR A1 - Schermer, Detleff T1 - Extrem beansprucht - der Sockelbereich monolithischer Wandkonstruktionen JF - BauPlaner Special Y1 - 2020 IS - 9 SP - 6 EP - 7 PB - Schiele & Schön CY - Berlin ER - TY - JOUR A1 - Schermer, Detleff A1 - Nagler, Florian A1 - Schwabe, Almut T1 - Archäologisches Haus am Petriplatz – massive Außenwandkonstruktion JF - Mauerwerk N2 - Petriplatz in Berlin is one of the earliest settlement sites in Berlin dating back to the 12th century. The Archaeological House is currently being built in this area on behalf of the Berlin Senate, which will integrate the finds associated with the site and make them directly accessible to visitors. The above-ground floors will serve as archaeological workshops and collection rooms and will feature a lecture hall. The chosen construction of the seven-storey building adapts to the local boundary conditions: Thus, the foundation is made on piles to minimize the intervention in the site and at the same time to create elements for geothermal energy. The static function as well as the fire protection requirements and the protection against external noise made it necessary to design the supporting structure-solidly in reinforced concrete. As a quasi-monolithic exterior wall structure in the standard area, a new system was developed by means of a load-bearing reinforced concrete inner shell and non-load-bearing infill of highly heat-insulating plane clay brick masonry. In addition to load transfer, particular -attention had to be paid to the issues of crack resistance, -execution and the interaction of concrete and masonry. T2 - Archaeological House at Petriplatz - massive outer wall-construction KW - archaeology KW - concrete KW - crack resistance KW - execution KW - masonry KW - multi-layer Y1 - 2021 U6 - https://doi.org/10.1002/dama.202100010 SN - 1437-1022 VL - 25 IS - 4 SP - 151 EP - 155 PB - Ernst & Sohn, a Wiley Brand ER - TY - JOUR A1 - Finckh, Wolfgang A1 - Ignatiadis, Anett A1 - Niedermeier, Roland A1 - Wiens, Udo A1 - Zilch, Konrad T1 - Die neue DAfStb-Richtlinie "Verstärken von Betonbauteilen mit geklebter Bewehrung" [The new DAfStb-Guideline "Strengthening of concrete structures with adhesive bonded reinforcement"] JF - Beton- und Stahlbetonbau N2 - Die Verstärkung von Betonbauteilen mit geklebter Bewehrung wurde in Deutschland bisher alleinig durch allgemeine bauaufsichtliche Zulassungen und Zustimmungen im Einzelfall geregelt. Da sich das Verstärken von Betonbauteilen mit geklebter Bewehrung immer mehr zur Regelbauweise entwickelt und die europäische Harmonisierung auf diesem Gebiet voranschreitet, wurde ein neues Regelwerk für die Verstärkung von Betonbauteilen mit geklebter Bewehrung geschaffen. Dazu haben sich alle von der Themenstellung betroffenen Parteien in einem Unterausschuss des Deutschen Ausschusses für Stahlbeton zusammengefunden und sich in die Formulierung der DAfStb-Richtlinie .Verstärken von Betonbauteilen mit geklebter Bewehrung. eingebracht. Nach Abschluss des Einspruchsverfahrens und anschließender Notifizierung erscheint die Richtlinie voraussichtlich im September oder Oktober 2012. KW - Anwendungsgebiet KW - Bemessung KW - Betonbauteil KW - CFK-Lamelle KW - DAfStb-Richtlinie KW - Klebebewehrung KW - Konstruktion KW - Kraftübertragung KW - Lamellenverstärkung KW - Richtlinie KW - Stütze KW - Umschnürungsbewehrung KW - Verbundspannung KW - Verstärkung Y1 - 2012 U6 - https://doi.org/10.1002/best.201200047 VL - 107 IS - 10 SP - 711 EP - 715 ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Zilch, Konrad T1 - Comparison of Guidelines for Externally Bonded Reinforcement T2 - Codes in structural engineering - Developments and needs for international practice ; joint IABSE - fib conference, Dubrovnik, Croatia, May 3 - 5, 2010 Y1 - 2010 SN - 978-9537621087 CY - Zagreb ER - TY - BOOK A1 - Fingerloos, Frank A1 - Finckh, Wolfgang A1 - Hochreither, Heinrich A1 - Ignatiadis, Anett A1 - Jenisch, Franz-Michael A1 - Landgraf, Markus A1 - Prietz, Frank A1 - Schmitt, Walter A1 - Schuster, Konrad A1 - Schwabach, Enrico T1 - Verbesserung der Praxistauglichkeit der Baunormen durch pränormative Arbeit - Teilantrag 2: Betonbau Y1 - 2015 UR - https://www.irbnet.de/daten/rswb/15089002957.pdf PB - Fraunhofer IRB Verlag CY - Stuttgart ER -