TY - GEN A1 - Schermer, Detleff ED - Schermer, Detleff ED - Brehm, Eric T1 - Mauerwerk-Kalender 2021 BT - Kunststoffverankerungen, Digitalisierung im Mauerwerksbau KW - Mauerwerksbau KW - Mauerwerk KW - Kunststoffbauteil Y1 - 2021 SN - 978-3-433-03293-0 U6 - https://doi.org/10.1002/9783433610732 VL - 2021 PB - Ernst & Sohn GmbH CY - Berlin ET - 46 ER - TY - GEN A1 - Schermer, Detleff ED - Schermer, Detleff ED - Brehm, Eric T1 - Mauerwerk-Kalender 2022 BT - Fassadengestaltung, Bauphysik, Innovationen KW - Mauerwerksbau KW - Mauerwerk KW - Kunststoffbauteil Y1 - 2022 SN - 978-3-433-03356-2 U6 - https://doi.org/10.1002/9783433611029 VL - 47 PB - Ernst & Sohn GmbH CY - Berlin ER - TY - JOUR A1 - Schermer, Detleff A1 - Meyer, Udo A1 - Lutman, Marjana A1 - Triller, Petra T1 - Shear tests on full scale storey-height specimens constructed with thermally insulating clay unit masonry with thin-layer mortar JF - Mauerwerk N2 - The paper presents results of a series of 6 in-plane shear tests on storey-height clay unit masonry panels [1] with thin-layer mortar, carried out in addition to previous test campaigns [2], [3], and [4]. The walls were constructed with unfilled thermally insulating clay units with a thermal conductivity of lambda = 0.09 W/(m . K). The current design rules for clay unit masonry according to DIN EN 1996-1-1/NA [5] are conservative compared to the presented test results for thermally insulating clay unit masonry. KW - clay units KW - design KW - in-plane shear KW - test methods KW - thin-layer mortar KW - WALLS Y1 - 2019 U6 - https://doi.org/10.1002/dama.201900025 SN - 1432-3427 VL - 23 IS - 6 SP - 378 EP - 386 PB - Ernst & Sohn ER - TY - JOUR A1 - Schermer, Detleff A1 - Meyer, Udo Joachim A1 - Lutman, Marjana A1 - Triller, Petra T1 - Shear tests on highly thermal insulating clay unit masonry walls with thin layer mortar JF - Mauerwerk N2 - The paper presents the results of a series of 6 shear tests on full scale highly thermal insulating clay unit masonry walls. The walls consisted of units with large voids filled with mineral wool with a thermal conductivity of lambda= 0,07 W/(m . K). The aim of the investigations was the verification of the in-planeshear resistance of this type of thermal insulating clay unit masonry in addition to the tests reported in [1]. The current design rules for clay unit masonry in DIN EN 1996-1-1/NA are rather conservative compared to the test results for thermal insulating units. KW - clay units KW - design KW - experimental testing KW - masonry with thin layer mortar KW - shear KW - thin layer mortar Y1 - 2019 U6 - https://doi.org/10.1002/dama.201900007 SN - 1432-3427 VL - 23 IS - 3 SP - 160 EP - 169 PB - Ernst & Sohn CY - Berlin ER - TY - JOUR A1 - Schermer, Detleff T1 - Design according to Eurocode 6 in practice JF - Mauerwerk N2 - For the structural design of masonry according to Eurocode 6 with the associated German national annex, the simplified method and the further simplified calculation method in Annex A are available. These procedures provide tools that can be used in practice to design standard cases quickly and easily. One feature of the verification of masonry walls under compressive loading is that no bending moments in the walls have to be determined as part of the determination of section forces and moments since the verification of the load-bearing capacity of the wall is based solely on the acting vertical force. The effects of floor end restraint and buckling are dealt with by simple equations. One new feature of verification according to Eurocode 6 is that the effect of partially supported floors on the load-bearing capacity of the wall can be included directly. The code is compact and simple to use and the further simplified calculation method is predestined for verification by manual calculation. T2 - Bemessung nach Eurocode 6 in der Praxis KW - buckling KW - calculation method KW - construction detailing KW - Eurocode 6 KW - masonry KW - structural design KW - floor bearing depth KW - further simplified Y1 - 2017 U6 - https://doi.org/10.1002/dama.201700719 SN - 1432-3427 SN - 1437-1022 VL - 21 IS - 1 PB - Ernst & Sohn, a Wiley brand ER - TY - JOUR A1 - Schermer, Detleff T1 - Bemessungsbeispiele - Nachweisführung nach dem vereinfachten Verfahren JF - Mauerwerk N2 - Die Regelungen im vereinfachten Verfahren von Eurocode 6, Teil 3 [4] mit dem zugehörigen Nationalen Anhang erlauben es, in wenigen Schritten rechnerische Nachweise von Mauerwerksbauteilen durchzuführen. Anhand mehrerer Bauteilnachweise aus der Praxis wird im Folgenden die Nachweisführung nach dem vereinfachten Verfahren dargestellt. Es ist erkennbar, dass bei Einhaltung der Anforderungen an das vereinfachte Verfahren sich die rechnerische Nachweisführung sehr einfach gestaltet und der größte Zeitaufwand in der Lastermittlung der einzelnen Bauteile liegt. Eine weitere Vereinfachung, die jedoch etwas stärkere Einschränkungen des Anwendungsbereiches bedingt, ist durch das im Anhang A angegebene sog. stark vereinfachte Verfahren gegeben. Y1 - 2014 U6 - https://doi.org/10.1002/dama.201400638 SN - 1432-3427 VL - 18 IS - 6 SP - 365 EP - 370 PB - Ernst & Sohn, a Wiley brand ER - TY - JOUR A1 - Schermer, Detleff T1 - The simplified calculation method of DIN EN 1996-3 in practice JF - Mauerwerk N2 - The design and detailing of masonry buildings was usually undertaken in the past using the simplified procedure in Section 6 of DIN 1053-1 (1996-11). With the changeover to the new European code, a new procedure has been made available with the simplified calculation method of DIN EN 1996-3, which promises similarly simple and safe handling for the user. The practical implementation of this new code has been underway for some time. The article investigates the standard design cases and explains the innovations and alterations compared to DIN 1053-1. T2 - Das vereinfachte Bemessungsverfahren von DIN EN 1996-3 in der Praxis Y1 - 2015 U6 - https://doi.org/10.1002/dama.201500682 VL - 19 IS - 6 SP - 471 EP - 478 PB - Wiley ER - TY - JOUR A1 - Schermer, Detleff A1 - Schmalz, Jonathan A1 - Meyer, Udo A1 - Gams, Matija A1 - Lutman, Marjana A1 - Triller, Petra T1 - Shear tests on thermal insulating clay unit masonry walls with thin layer mortar JF - Mauerwerk N2 - The paper presents the results of 20 shear tests on full scale thermal insulating clay unit masonry walls. The types of units used (units with large chambers filled with mineral wool pads and units with small corings filled with mineral wool granulate) as well as the tested wall geometries and vertical loads are representative of the most common wall constructions currently used in housing in Germany. The aim of the investigations was the verification of the shear -resistance of thermal insulating clay unit masonry under realistic conditions and comparison with the design rules in the codes and national technical approvals. The current design rules for clay unit masonry in DIN EN 1996-1-1/NA are rather conservative compared to the test results for thermal insulating units. KW - design KW - experimental testing KW - high precision clay masonry units KW - masonry with thin layer mortar KW - shear KW - thin layer mortar Y1 - 2018 U6 - https://doi.org/10.1002/dama.201800028 VL - 22 IS - 6 SP - 385 EP - 398 PB - Ernst & Sohn, a Wiley brand ER - TY - CHAP A1 - Zilch, Konrad A1 - Niedermeier, Roland A1 - Finckh, Wolfgang T1 - Geklebte Verstärkung mit CFK-Lamellen und Stahllaschen T2 - Beton-Kalender 2021 KW - Lamelle KW - Kohlenstofffaserverstärkter Kunststoff KW - Klebeverbindung KW - Verstärkung Y1 - 2021 SN - 978-3-433-03301-2 U6 - https://doi.org/10.1002/9783433610206.ch12 SP - 1008 EP - 1105 CY - Berlin ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Quantz, Hilmar T1 - Veränderung der Tragstrukturen von historischen Mauerwerksgewölben am Beispiel der Erschließung Wilhelmsburg in Ulm T2 - Mauerwerk-Kalender N2 - Im Rahmen der horizontalen und vertikalen Erschließung der denkmalgeschützten Wilhelmsburg als Teil der Ulmer Bundesfestung waren erhebliche Eingriffe in die historische Gewölbetragstruktur erforderlich. Hierbei mussten die Kräfte aus den in sich kurzgeschlossenen Gewölbereihen aus gebrochenem Kalksteinmauerwerk umgelagert bzw. umgeleitet werden. In dem Beitrag werden Vorgehensweise, Planung, Berechnungsmethodik und Ausführung sowie die Besonderheiten bezüglich der Gestaltungsanforderungen unter Denkmalschutz erläutert. Insbesondere wird auf die Berechnungen und Ausführungen der hier relevanten Bauzustände eingegangen. Auch die spezielleren Anforderungen an die Gründung der neuen eingebauten Bauteile mit hohen Lasten werden vertieft. KW - Gewölbe KW - Mauerwerk KW - Tragverhalten KW - Bundesfestung Ulm Y1 - 2021 SN - 978-3-433-03293-0 U6 - https://doi.org/10.1002/9783433610732.ch5 SP - 163 EP - 195 PB - Ernst&Sohn, a Wiley brand CY - Berlin ER -