TY - CHAP A1 - Finckh, Wolfgang A1 - Niedermeier, Roland T1 - Example 4: Strengthening a reinforced concrete column by wrapping T2 - Commentary on the DAfStb guideline "Strengthening of concrete members with adhesively bonded reinforcement" with examples KW - Betonbauteil KW - Bewehrung KW - Lamelle KW - Kohlenstofffaserverstärkter Kunststoff KW - Kleben KW - Tragfähigkeit KW - Bemessung KW - Gewirke KW - Kohlenstofffaser Y1 - 2014 SN - 978-3-410-65255-7 SN - 0171-7197 SP - 115 EP - 125 PB - Beuth CY - Berlin ; Wien ; Zürich ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Niedermeier, Roland A1 - Schmitt, Alexander A1 - Zilch, Konrad ED - Zilch, Konrad T1 - Beispiel 3: Verstärkung eines Plattenbalkens mit aufgeklebten CFK-Lamellen T2 - Erläuterungen und Beispiele zur DAfStb-Richtlinie "Verstärken von Betonbauteilen mit geklebter Bewehrung" KW - Betonbauteil KW - Bewehrung KW - Lamelle KW - Kohlenstofffaserverstärkter Kunststoff KW - Kleben KW - Tragfähigkeit KW - Bemessung KW - Gewirke KW - Kohlenstoffaser Y1 - 2013 SN - 978-3-410-65245-8 SN - 0171-7197 SP - 83 EP - 108 PB - Beuth CY - Berlin ER - TY - BOOK A1 - Zilch, Konrad A1 - Niedermeier, Roland A1 - Finckh, Wolfgang T1 - Querkrafttragfähigkeit von historisch mit Betonstabstahl bewehrten und mit geklebter Bewehrung biegeverstärkten Betonbauteilen Y1 - 2012 UR - https://www.irbnet.de/daten/rswb/12059022426.pdf SN - 978-3-8167-8707-5 PB - Fraunhofer IRB Verlag CY - Stuttgart ER - TY - JOUR A1 - Finckh, Wolfgang A1 - Ignatiadis, Anett A1 - Niedermeier, Roland A1 - Wiens, Udo A1 - Zilch, Konrad T1 - Die neue DAfStb-Richtlinie "Verstärken von Betonbauteilen mit geklebter Bewehrung" [The new DAfStb-Guideline "Strengthening of concrete structures with adhesive bonded reinforcement"] JF - Beton- und Stahlbetonbau N2 - Die Verstärkung von Betonbauteilen mit geklebter Bewehrung wurde in Deutschland bisher alleinig durch allgemeine bauaufsichtliche Zulassungen und Zustimmungen im Einzelfall geregelt. Da sich das Verstärken von Betonbauteilen mit geklebter Bewehrung immer mehr zur Regelbauweise entwickelt und die europäische Harmonisierung auf diesem Gebiet voranschreitet, wurde ein neues Regelwerk für die Verstärkung von Betonbauteilen mit geklebter Bewehrung geschaffen. Dazu haben sich alle von der Themenstellung betroffenen Parteien in einem Unterausschuss des Deutschen Ausschusses für Stahlbeton zusammengefunden und sich in die Formulierung der DAfStb-Richtlinie .Verstärken von Betonbauteilen mit geklebter Bewehrung. eingebracht. Nach Abschluss des Einspruchsverfahrens und anschließender Notifizierung erscheint die Richtlinie voraussichtlich im September oder Oktober 2012. KW - Anwendungsgebiet KW - Bemessung KW - Betonbauteil KW - CFK-Lamelle KW - DAfStb-Richtlinie KW - Klebebewehrung KW - Konstruktion KW - Kraftübertragung KW - Lamellenverstärkung KW - Richtlinie KW - Stütze KW - Umschnürungsbewehrung KW - Verbundspannung KW - Verstärkung Y1 - 2012 U6 - https://doi.org/10.1002/best.201200047 VL - 107 IS - 10 SP - 711 EP - 715 ER - TY - CHAP A1 - Kraus, Michael A. A1 - Obergrießer, Mathias ED - Brehm, Detleff ED - Schermer, Eric T1 - Digitale Transformation im Bauwesen – Grundlagen zur künstlichen Intelligenz und deren Anwendung im Wohnungsbau T2 - Mauerwerk-Kalender 2023: Instandsetzung, Erdbeben, Lehmbau N2 - Dieser Beitrag führt die im Mauerwerk-Kalender 2022 begonnene Reihe zur digitalen Transformation der Planung im Bauwesen weiter. Dazu werden mit Hinblick auf die Anwendung im Wohnungsbau zunächst relevante Grundlagen der digitalen Transformation des Bauwesens in Abschnitt~2 sowie künstlicher Intelligenz (KI), maschinelles und tiefes Lernen in Abschnitt~3 eingeführt. Insbesondere verfolgt Abschnitt~3 zur KI die Erzielung eines begriff‌lichen und semantischen Verständnisses verschiedener KI-Algorithmen, Modelle und für das Arbeiten mit Daten, insbesondere für die in Abschnitt~4 und~5 betrachteten Anwendungsbeispiele und Zukunftspotenziale im Wohnungsbau. In Abschnitt~4 werden Anwendungen von KI in den Lebenszyklusphasen eines Immobilienprojekts anhand von Beispielen aufgezeigt. Dabei werden Beispiele zum generativen Design von Wohnungsgrundrissen in frühen Planungsphasen, die Unterstützung von statischen Berechnungen mit KI, der Einsatz von KI im Zuge der Bauausführung sowie im Betrieb einer Immobilie detaillierter betrachtet. Abgeschlossen wird dieser Beitrag mit einem Ausblick, welcher die Gesamtheit der dargestellten Inhalte betrachtet und bewertet, sodass ein Ableiten von Schlussfolgerungen, Implikationen und Empfehlungen für Forschung und Baupraxis bzgl. der digitalen Transformation und des Einsatzes von KI möglich wird. Y1 - 2023 SN - 978-3-433-03374-6 U6 - https://doi.org/10.1002/9783433611142.ch12 VL - 48 SP - 275 EP - 308 PB - Ernst & Sohn, a Wiley Brand CY - Berlin ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Zilch, Konrad T1 - Comparison of Guidelines for Externally Bonded Reinforcement T2 - Codes in structural engineering - Developments and needs for international practice ; joint IABSE - fib conference, Dubrovnik, Croatia, May 3 - 5, 2010 Y1 - 2010 SN - 978-9537621087 CY - Zagreb ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Zilch, Konrad T1 - Influence of member-specific effects the bond force transfer of reinforced concrete strengthened with externally bonded CFRP-strips T2 - Proceedings of the Fourth International Symposium "Bond in concrete 2012: Bond, Anchorage, Detailing" -Brescia, Italy, 17th - 20th June 2012. Volume 2: Bond in New Materials and Under Severe Conditions Y1 - 2012 SN - 978-88-907078-3-4 SN - 8890707836 PB - Publisher creation CY - Manerbio ER - TY - CHAP A1 - Wegh, Niels A1 - Wagner, Marcus A1 - Gaudlitz, Daniel A1 - Finckh, Hermann A1 - Klein, Markus T1 - Numerical Simulation of Filling Process in Resin Transfer Molding T2 - 13th International Conference on Flow Processes in Composites Materials (FPCM-13), Kyoto, Japan Y1 - 2016 UR - https://www.fose1.plymouth.ac.uk/sme/fpcm/fpcm13/Abstracts/FPCM-13_extended_abstract_21.pdf ER - TY - JOUR A1 - Zilch, Konrad A1 - Finckh, Wolfgang A1 - Niedermeier, Roland A1 - Wiens, Udo T1 - DAfStb-Richtlinie: Verstärken von Betonbauteilen mit geklebter Bewehrung – Teil 1: Bemessung und Konstruktion JF - Bauingenieur Y1 - 2011 VL - 86 IS - 5 SP - 197 EP - 206 PB - VDI-Verlag ER - TY - JOUR A1 - Zilch, Konrad A1 - Niedermeier, Roland A1 - Finckh, Wolfgang T1 - Bauteilspezifische Effekte auf die Verbundkraftübertragung von mit aufgeklebten CFK-Lamellen verstärkten Betonbauteilen JF - Bauingenieur Y1 - 2010 VL - 85 IS - 2 SP - 97 EP - 104 PB - Springer-VDI-Verlag ER - TY - JOUR A1 - Finckh, Wolfgang A1 - Zilch, Konrad T1 - Strengthening and Rehabilitation of Reinforced Concrete Slabs with Carbon-Fiber Reinforced Polymers Using a Refined Bond Model JF - Computer-Aided Civil and Infrastructure Engineering N2 - Slabs are one of the main load-bearing elements in nearly every structure. Because of additional live loads or modifications of the building structure these slabs often have to be strengthened. Using externally bonded carbon-fiber reinforced polymer (CFRP) strips to strengthen existing concrete structures has become common practice. One of the main failure modes is the loss of the composite action between the concrete and the CFRP strip making the bond force transfer very important. This bond force transfer depends on many parameters including the concrete strength, the ratio between shear force, and bending moment. A new parameter recently discovered by the Technische Universität München (TUM) is the deflection of the structural elements themselves. Because of this deflection self-inducted contact pressure occurs. This contact pressure affects a higher bond transfer. The lower effective depth of slabs compared to beams causes higher deflections. In this article, first a few principles on the strengthening with adhesive-bonded CFRP strips and the characteristics of the bond are explained. Then, the basics of the bond force transfer, at the end anchorage and in the rest of the element, are summarized. Based on these essentials, as well as numerous experiments, the change in the bond force transfer at the structural element caused by the curvature is then derived. With these findings, a complete verification concept is presented, which is ideal for computerized calculations. This verification concept is finally compared to several full-scale test results presented in pertinent literature. Y1 - 2012 U6 - https://doi.org/10.1111/j.1467-8667.2011.00752.x VL - 27 IS - 5 SP - 333 EP - 346 PB - Wiley ER - TY - THES A1 - Finckh, Wolfgang T1 - Einfluss bauteilspezifischer Effekte auf die Bemessung von mit CFK-Lamellen verstärkten Stahlbetonbauteilen N2 - Die vorliegende Arbeit beschäftigt sich mit dem Tragverhalten von mit kohlenstofffaserverstärkter Kunststoff Lamellen (CFK-Lamellen) biegeverstärkten Betonbauteilen. Ein wesentlicher Fokus dieser Arbeit liegt dabei auf dem Verbundverhalten aufgeklebter CFK-Lamellen und der damit verbundenen Verbundkraftübertragung am Bauteil. Dazu werden auf Grundlage von zahlreichen eigenen experimentellen Untersuchungen verschiedene bekannte Modelle miteinander kombiniert und um bauteilspezifische Effekte erweitert. Dadurch kann erstmals ein geschlossenes, realitätsnahes sowie vollständig mechanisch begründetes Bemessungsmodell für mit aufgeklebten CFK-Lamellen biegeverstärkte Betonbauteile angegeben werden. Im Rahmen der Arbeit wird gezeigt, dass das so entwickelte Bemessungsmodell das Tragverhalten von zahlreichen Bauteilversuchen an unterschiedlichen statischen Systemen mit unterschiedlichsten Bauteilabmessungen und Bewehrungsführungen gut beschreiben kann. Aufbauend auf dem entwickelten Bemessungsmodell werden mithilfe von Simulationen auf der sicheren Seite liegende vereinfachte Ingenieurmodelle für eine schnelle und einfache Bemessung angegeben. Neben der Verbundkraftübertragung der aufgeklebten CFK-Lamellen, welche erstmals in Abhängigkeit der Bauteilverformungen und der Querkrafteinflüsse beschrieben wird, werden in der Arbeit auch das Querkrafttragverhalten, die Rissbildung sowie die Schnittgrößenumlagerung von mit aufgeklebten und in Schlitze ver- klebten CFK-Lamellen verstärkten Betonbauteilen betrachtet. Somit steht mit dieser Arbeit ein vollständiges Bemessungskonzept für mit CFK-Lamellen biegeverstärkten Betonbauteilen unter statischer Belastung zur Verfügung. Y1 - 2012 UR - https://mediatum.ub.tum.de/doc/1083989/1083989.pdf N1 - Technische Universität München, Dissertation CY - München ER - TY - BOOK A1 - Zilch, Konrad A1 - Niedermeier, Roland A1 - Finckh, Wolfgang T1 - Verankerung von aufgeklebten Stahllaschen im Bereich von Biegemomenten mit wechselnden Vorzeichen N2 - Bei durchlaufenden verstärkten Stahlbetonkonstruktionen kann es aufgrund der ungünstigen Anordnung der Verkehrslasten im Bereich der Verankerung der aufgeklebten Bewehrung zu einem Vorzeichenwechsel des Momentes bei unterschiedlichen Lastfällen kommen. Dies führt dazu, dass die aufgeklebte Verstärkung in einem bestimmten Bereich sowohl Zug- wie auch Druckkräften ausgesetzt ist. Im Rahmen dieses Forschungsberichtes werden zunächst bisherige Untersuchungen, welche diese Problemstellung tangieren, betrachtet. Darauf aufbauend werden Verbunddruckversuche mit unterschiedlich dicken Stahllaschen durchgeführt, um das Verhalten des Verbundes unter Druckbeanspruchung zu untersuchen. Zur Verifizierung der Versuchsergebnisse sowie zur Erfassung weiterer bauteilspezifischer Effekte werden zwei Versuche an einem Durchlaufträger durchgeführt in welchem die Stahllaschen bis weit in den Druckbereich verankert waren. Aufgrund der durchgeführten experimentellen Untersuchungen werden abschließend Empfehlungen für den Umgang mit dieser Problemstellung in der Bemessung gegeben. Y1 - 2012 SN - 978-3-8167-8821-8 PB - Fraunhofer IRB Verlag CY - Stuttgart ER - TY - BOOK A1 - Fingerloos, Frank A1 - Finckh, Wolfgang A1 - Hochreither, Heinrich A1 - Ignatiadis, Anett A1 - Jenisch, Franz-Michael A1 - Landgraf, Markus A1 - Prietz, Frank A1 - Schmitt, Walter A1 - Schuster, Konrad A1 - Schwabach, Enrico T1 - Verbesserung der Praxistauglichkeit der Baunormen durch pränormative Arbeit - Teilantrag 2: Betonbau Y1 - 2015 UR - https://www.irbnet.de/daten/rswb/15089002957.pdf PB - Fraunhofer IRB Verlag CY - Stuttgart ER - TY - BOOK A1 - Zilch, Konrad A1 - Niedermeier, Roland A1 - Finckh, Wolfgang T1 - Praxisgerechte Bemessungsansätze für das wirtschaftliche Verstärken von Betonbauteilen mit geklebter Bewehrung BT - Querkrafttragfähigkeit KW - Stahlbetonbauteil KW - Bewehrung KW - Bemessung KW - Verbundverhalten KW - Kohlenstofffaserverstärkter Kunststoff KW - Tragfähigkeit KW - Lamelle Y1 - 2012 SN - 978-3-410-65205-2 PB - Beuth CY - Berlin ER - TY - BOOK A1 - Zilch, Konrad A1 - Niedermeier, Roland A1 - Finckh, Wolfgang T1 - Praxisgerechte Bemessungsansätze für das wirtschaftliche Verstärken von Betonbauteilen mit geklebter Bewehrung BT - Verbundtragfähigkeit unter statischer Belastung Y1 - 2012 SN - 978-3-410-65202-1 PB - Beuth CY - Berlin ER - TY - JOUR A1 - Schermer, Detleff T1 - Design according to Eurocode 6 in practice JF - Mauerwerk N2 - For the structural design of masonry according to Eurocode 6 with the associated German national annex, the simplified method and the further simplified calculation method in Annex A are available. These procedures provide tools that can be used in practice to design standard cases quickly and easily. One feature of the verification of masonry walls under compressive loading is that no bending moments in the walls have to be determined as part of the determination of section forces and moments since the verification of the load-bearing capacity of the wall is based solely on the acting vertical force. The effects of floor end restraint and buckling are dealt with by simple equations. One new feature of verification according to Eurocode 6 is that the effect of partially supported floors on the load-bearing capacity of the wall can be included directly. The code is compact and simple to use and the further simplified calculation method is predestined for verification by manual calculation. T2 - Bemessung nach Eurocode 6 in der Praxis KW - buckling KW - calculation method KW - construction detailing KW - Eurocode 6 KW - masonry KW - structural design KW - floor bearing depth KW - further simplified Y1 - 2017 U6 - https://doi.org/10.1002/dama.201700719 SN - 1432-3427 SN - 1437-1022 VL - 21 IS - 1 PB - Ernst & Sohn, a Wiley brand ER - TY - JOUR A1 - Schermer, Detleff T1 - Bemessungsbeispiele - Nachweisführung nach dem vereinfachten Verfahren JF - Mauerwerk N2 - Die Regelungen im vereinfachten Verfahren von Eurocode 6, Teil 3 [4] mit dem zugehörigen Nationalen Anhang erlauben es, in wenigen Schritten rechnerische Nachweise von Mauerwerksbauteilen durchzuführen. Anhand mehrerer Bauteilnachweise aus der Praxis wird im Folgenden die Nachweisführung nach dem vereinfachten Verfahren dargestellt. Es ist erkennbar, dass bei Einhaltung der Anforderungen an das vereinfachte Verfahren sich die rechnerische Nachweisführung sehr einfach gestaltet und der größte Zeitaufwand in der Lastermittlung der einzelnen Bauteile liegt. Eine weitere Vereinfachung, die jedoch etwas stärkere Einschränkungen des Anwendungsbereiches bedingt, ist durch das im Anhang A angegebene sog. stark vereinfachte Verfahren gegeben. Y1 - 2014 U6 - https://doi.org/10.1002/dama.201400638 SN - 1432-3427 VL - 18 IS - 6 SP - 365 EP - 370 PB - Ernst & Sohn, a Wiley brand ER - TY - JOUR A1 - Schermer, Detleff A1 - Nagler, Florian A1 - Schwabe, Almut T1 - Archäologisches Haus am Petriplatz – massive Außenwandkonstruktion JF - Mauerwerk N2 - Petriplatz in Berlin is one of the earliest settlement sites in Berlin dating back to the 12th century. The Archaeological House is currently being built in this area on behalf of the Berlin Senate, which will integrate the finds associated with the site and make them directly accessible to visitors. The above-ground floors will serve as archaeological workshops and collection rooms and will feature a lecture hall. The chosen construction of the seven-storey building adapts to the local boundary conditions: Thus, the foundation is made on piles to minimize the intervention in the site and at the same time to create elements for geothermal energy. The static function as well as the fire protection requirements and the protection against external noise made it necessary to design the supporting structure-solidly in reinforced concrete. As a quasi-monolithic exterior wall structure in the standard area, a new system was developed by means of a load-bearing reinforced concrete inner shell and non-load-bearing infill of highly heat-insulating plane clay brick masonry. In addition to load transfer, particular -attention had to be paid to the issues of crack resistance, -execution and the interaction of concrete and masonry. T2 - Archaeological House at Petriplatz - massive outer wall-construction KW - archaeology KW - concrete KW - crack resistance KW - execution KW - masonry KW - multi-layer Y1 - 2021 U6 - https://doi.org/10.1002/dama.202100010 SN - 1437-1022 VL - 25 IS - 4 SP - 151 EP - 155 PB - Ernst & Sohn, a Wiley Brand ER - TY - JOUR A1 - Schermer, Detleff A1 - Meyer, Udo Joachim A1 - Lutman, Marjana A1 - Triller, Petra T1 - Shear tests on highly thermal insulating clay unit masonry walls with thin layer mortar JF - Mauerwerk N2 - The paper presents the results of a series of 6 shear tests on full scale highly thermal insulating clay unit masonry walls. The walls consisted of units with large voids filled with mineral wool with a thermal conductivity of lambda= 0,07 W/(m . K). The aim of the investigations was the verification of the in-planeshear resistance of this type of thermal insulating clay unit masonry in addition to the tests reported in [1]. The current design rules for clay unit masonry in DIN EN 1996-1-1/NA are rather conservative compared to the test results for thermal insulating units. KW - clay units KW - design KW - experimental testing KW - masonry with thin layer mortar KW - shear KW - thin layer mortar Y1 - 2019 U6 - https://doi.org/10.1002/dama.201900007 SN - 1432-3427 VL - 23 IS - 3 SP - 160 EP - 169 PB - Ernst & Sohn CY - Berlin ER - TY - BOOK A1 - Zilch, Konrad A1 - Niedermeier, Roland A1 - Finckh, Wolfgang T1 - Sachstandbericht Verstärken von Betonbauteilen mit geklebter Bewehrung N2 - Das nachträgliche Verstärken von bestehenden Bauteilen ist eine häufig auftretende Problemstellung, die durch das Aufkleben von zusätzlicher Bewehrung gelöst werden kann. An der Tragweise der geklebten Bewehrung wird seit den 60er Jahren intensiv geforscht. Die erste bauaufsichtliche Zulassung wurde 1979 vom DIBt erteilt. Seit dieser Zeit hat sich die Bauweise in der Praxis etabliert und immer weitere Anwendungsmöglichkeiten, Materialien und Verfahren wurden entdeckt. An den Forschungsstellen wurden mithilfe von zahlreichen Versuchen immer bessere Modelle für die Tragweise entwickelt. Das Tragverhalten aufgeklebter Bewehrung wird durch den mäßigen Verbund zwischen der geklebten Bewehrung und dem Beton bestimmt, was besondere Bemessungsansätze nötig macht. Im Rahmen der Erstellung dieses Sachstandberichtes wurden zahlreiche Bauteil- und Verbundversuche mit geklebter Bewehrung in einer Datenbank gesammelt. Die gängigen nationalen und internationalen Modelle sowie Bemessungsvorschriften sind in diesem Sachstandbericht nach Themen geordnet aufgelistet und wurden mit den Versuchswerten aus der Datenbank gegengerechnet und verglichen. Y1 - 2011 SN - 978-3-410-65193-2 PB - Beuth CY - Berlin ER - TY - JOUR A1 - Finckh, Wolfgang A1 - Kipp, Sandra T1 - Erfahrungen bei der Planung und Ausführung von Ortbetonschachtbaugruben JF - Bauingenieur N2 - Im Rahmen der Erstellung und Nutzung von Tunnel und Leitungsbauwerken ist oft eine Planung und Ausführung von Ortbetonschachtbaugruben notwendig. Diese Ingenieurbauaufgabe erfordert aufgrund der zahlreichen Randbedingungen eine gute Interaktion zwischen Ausführenden und Planer, um allen Anforderungen aus Statik, Baubetrieb, Vortrieb, Ausbau sowie späterer Nutzung gerecht zu werden. Mit der Auswahl eines geeigneten Bauverfahrens, einer günstigen Geometrie zusammen mit einer realitätsnahen Berechnung kann für jede Schachtbaugruben eine optimale sichere und wirtschaftliche Lösung gefunden werden. Dieser Artikel gibt zahlreiche Hinweise um dieses Optimum zu erreichen. KW - Auftriebssicherheit KW - Baugrubenverbau KW - Berechnungsannahme KW - Berechnungsverfahren KW - Bohrpfahlwand KW - Entwurf KW - Finite-Elemente-Methode KW - Geometrie KW - Hydraulischer Grundbruch KW - Konstruktionselement KW - Nachweis KW - Ortbetonbauweise KW - Planung KW - Schachtbau KW - Schlitzwand KW - Verbauwand Y1 - 2014 VL - 89 IS - 1 SP - 11 EP - 19 PB - VDI Fachmedien ER - TY - GEN A1 - Schermer, Detleff ED - Schermer, Detleff ED - Brehm, Eric T1 - Mauerwerk-Kalender 2022 BT - Fassadengestaltung, Bauphysik, Innovationen KW - Mauerwerksbau KW - Mauerwerk KW - Kunststoffbauteil Y1 - 2022 SN - 978-3-433-03356-2 U6 - https://doi.org/10.1002/9783433611029 VL - 47 PB - Ernst & Sohn GmbH CY - Berlin ER - TY - GEN A1 - Schermer, Detleff ED - Schermer, Detleff ED - Brehm, Eric T1 - Mauerwerk-Kalender 2021 BT - Kunststoffverankerungen, Digitalisierung im Mauerwerksbau KW - Mauerwerksbau KW - Mauerwerk KW - Kunststoffbauteil Y1 - 2021 SN - 978-3-433-03293-0 U6 - https://doi.org/10.1002/9783433610732 VL - 2021 PB - Ernst & Sohn GmbH CY - Berlin ET - 46 ER - TY - JOUR A1 - Schermer, Detleff T1 - Bemessung nach Eurocode 6 JF - Deutsches Ingenieurblatt / Bauplaner Y1 - 2016 UR - https://www.ingenieurbau-online.de/fachartikel/artikeldetail/bemessung-nach-eurocode-6 SN - 0946-2422 SN - 2365-192X IS - 9, Supplement SP - 14 EP - 15 PB - Schiele & Schön CY - Berlin ER - TY - JOUR A1 - Schermer, Detleff T1 - Extrem beansprucht - der Sockelbereich monolithischer Wandkonstruktionen JF - BauPlaner Special Y1 - 2020 IS - 9 SP - 6 EP - 7 PB - Schiele & Schön CY - Berlin ER - TY - JOUR A1 - Schermer, Detleff T1 - Lösungen im Bereich Statik JF - Deutsches Ingenieurblatt Y1 - 2018 VL - 25 IS - 10 SP - 6 EP - 7 PB - Schiele & Schön CY - Berlin ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Quantz, Hilmar T1 - Veränderung der Tragstrukturen von historischen Mauerwerksgewölben am Beispiel der Erschließung Wilhelmsburg in Ulm T2 - Mauerwerk-Kalender N2 - Im Rahmen der horizontalen und vertikalen Erschließung der denkmalgeschützten Wilhelmsburg als Teil der Ulmer Bundesfestung waren erhebliche Eingriffe in die historische Gewölbetragstruktur erforderlich. Hierbei mussten die Kräfte aus den in sich kurzgeschlossenen Gewölbereihen aus gebrochenem Kalksteinmauerwerk umgelagert bzw. umgeleitet werden. In dem Beitrag werden Vorgehensweise, Planung, Berechnungsmethodik und Ausführung sowie die Besonderheiten bezüglich der Gestaltungsanforderungen unter Denkmalschutz erläutert. Insbesondere wird auf die Berechnungen und Ausführungen der hier relevanten Bauzustände eingegangen. Auch die spezielleren Anforderungen an die Gründung der neuen eingebauten Bauteile mit hohen Lasten werden vertieft. KW - Gewölbe KW - Mauerwerk KW - Tragverhalten KW - Bundesfestung Ulm Y1 - 2021 SN - 978-3-433-03293-0 U6 - https://doi.org/10.1002/9783433610732.ch5 SP - 163 EP - 195 PB - Ernst&Sohn, a Wiley brand CY - Berlin ER - TY - CHAP A1 - Zilch, Konrad A1 - Niedermeier, Roland A1 - Finckh, Wolfgang T1 - Geklebte Verstärkung mit CFK-Lamellen und Stahllaschen T2 - Beton-Kalender 2021 KW - Lamelle KW - Kohlenstofffaserverstärkter Kunststoff KW - Klebeverbindung KW - Verstärkung Y1 - 2021 SN - 978-3-433-03301-2 U6 - https://doi.org/10.1002/9783433610206.ch12 SP - 1008 EP - 1105 CY - Berlin ER - TY - CHAP A1 - Schermer, Detleff ED - Zilch, Konrad ED - Diederichs, Claus Jürgen ED - Beckmann, Klaus J. ED - Gertz, Carsten ED - Malkwitz, Alexander ED - Moormann, Christian ED - Urban, Wilhelm ED - Valentin, Franz T1 - Bemessung von Mauerwerk T2 - Handbuch für Bauingenieure N2 - Die Bemessung von Mauerwerk deckt neben der Tragfähigkeit auch den Nachweis der Gebrauchstauglichkeit ab. Im Beitrag werden die Grundanforderungen und Hintergründe der Bemessung von Mauerwerk dargelegt und die Lösungen nach den aktuellen Vorschriften von Eurocode 6 und dem Nationalen Anhang erläutert. KW - Bemessung KW - Drucktragfähigkeit KW - Eurocode 6 KW - Genaueres Verfahren KW - Schnittgrößenermittlung KW - Schub KW - Spannungsblock KW - Unbewehrtes Mauerwerk KW - Vereinfachtes Verfahren Y1 - 2021 SN - 978-3-658-21749-5 U6 - https://doi.org/10.1007/978-3-658-21749-5_66-1 VL - 6 SP - 1 EP - 31 PB - Springer Fachmedien CY - Wiesbaden ER - TY - JOUR A1 - Schermer, Detleff T1 - The simplified calculation method of DIN EN 1996-3 in practice JF - Mauerwerk N2 - The design and detailing of masonry buildings was usually undertaken in the past using the simplified procedure in Section 6 of DIN 1053-1 (1996-11). With the changeover to the new European code, a new procedure has been made available with the simplified calculation method of DIN EN 1996-3, which promises similarly simple and safe handling for the user. The practical implementation of this new code has been underway for some time. The article investigates the standard design cases and explains the innovations and alterations compared to DIN 1053-1. T2 - Das vereinfachte Bemessungsverfahren von DIN EN 1996-3 in der Praxis Y1 - 2015 U6 - https://doi.org/10.1002/dama.201500682 VL - 19 IS - 6 SP - 471 EP - 478 PB - Wiley ER - TY - CHAP A1 - Obergrießer, Mathias A1 - Kraus, Michael A. ED - Schermer, Detleff ED - Brehm, Eric T1 - Digitale Transformation im Bauwesen – Von der Theorie zur Anwendung T2 - Mauerwerk-Kalender 2022: Fassadengestaltung, Bauphysik, Innovationen N2 - Dieser Beitrag führt zunächst in die digitale Transformation (DT) des Bauwesens und deren wesentliche Methoden wie BIM, digitaler Zwilling etc. ein. Zur Erzielung eines begriff‌lichen und semantischen Verständnisses werden die Definitionen zudem an Anwendungsbeispielen veranschaulicht. Neben den Gründen für die DT werden der Status quo sowie der Weg vom analogen Planen und Bauen zur Vision „Planen und Bauen~4.0“ dargestellt. Kernelemente sind verschiedene Ansatzpunkte, Entscheidungshilfen und Schlüsse zur Begegnung der technischen und adaptiven Herausforderungen der DT auf Unternehmer‑, aber auch Hochschulniveau. Insbesondere der Faktor Mensch und dessen humane wie technische Kollaborations- und Vernetzungsfähigkeit wird in diesem Beitrag Rechnung getragen. Abschließend wird neben einer Zusammenfassung der dargestellten Inhalte zudem ein Ausblick für die DT im Bauwesen bis hin zum Einsatz von Robotik und KI für den im nächsten Jahr erscheinenden zweiten Teil dieses Beitrags gegeben. Y1 - 2022 SN - 978-3-433-03356-2 U6 - https://doi.org/10.1002/9783433611029.ch16 VL - 47 SP - 499 EP - 519 PB - Ernst & Sohn CY - Berlin ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Schmitt, Alexander A1 - Zilch, Konrad T1 - Example 1: Strengthening a slab with externally bonded CFRP strips T2 - Commentary on the DAfStb guideline "Strengthening of concrete members with adhesively bonded reinforcement" with examples KW - Betonbauteil KW - Bewehrung KW - Lamelle KW - Kohlenstofffaserverstärkter Kunststoff KW - Kleben KW - Tragfähigkeit KW - Bemessung KW - Gewirke KW - Kohlenstoffaser Y1 - 2014 SN - 978-3-410-65255-7 SN - 0171-7197 SP - 47 EP - 68 PB - Beuth CY - Berlin ; Wien ; Zürich ER - TY - CHAP A1 - Finckh, Wolfgang ED - Zilch, Konrad T1 - Verstärken mit geklebter Bewehrung - Sachstand und neue Entwicklungen T2 - 13. Münchener Massivbau Seminar 2009 Y1 - 2009 PB - Förderverein Massivbau der TU München CY - München ER - TY - JOUR A1 - Schermer, Detleff T1 - Hybrid testing of masonry structures subjected to seismic loading JF - Mauerwerk N2 - The combination of experiments and numeric description in a test makes it possible to realistically investigate almost any type of system subjected to dynamic loading without requiring the extremely expensive device of a shaking table. With the numeric approach it is possible to examine the behaviour of even very large and complex structures, thus reducing the experimental investigations to the essential part of the system – for example, bracing masonry walls. This test method has proved to be very helpful, particularly for the investigation of seismic loading, and it allows the synchronous examination of several force and displacement variables (horizontal, vertical, rotational). A new laboratory is presented for the investigation of full-scale building structures up to three storeys high. Die Kombination von Experiment und numerischer Beschreibung innerhalb eines Versuches erlaubt die realitätsnahe Untersuchung annähernd beliebiger Systeme unter dynamischen Beanspruchungen, ohne den extrem hohen Aufwand von Rütteltischen zu erfordern. Durch die Numerik können auch sehr große und komplexe Strukturen mit ihrem Verhalten erfasst werden, wobei sich die versuchsmäßige Untersuchung auf den maßgebenden Teil des Systems – beispielsweise aussteifende Mauerwerkswände – beschränken kann. Insbesondere für Erdbebenbeanspruchung hat sich die Versuchsmethode sehr gut bewährt und es können mehrere Kraft- und Verschiebungsgrößen (horizontal, vertikal, Rotation) synchron behandelt werden. Für die Untersuchung an vollmaßstäblichen Gebäudestrukturen bis zu drei Geschossen wird ein neues Labor vorgestellt. T2 - Hybride Versuche an Mauerwerkskonstruktionen unter Erdbebenbeanspruchung Y1 - 2014 U6 - https://doi.org/10.1002/dama.201400625 SN - 1437-1022 SN - 1432-3427 VL - 18 IS - 3-4 SP - 206 EP - 212 PB - Ernst ; WILEY CY - Berlin ; Weinheim ER - TY - CHAP A1 - Zilch, Konrad A1 - Finckh, Wolfgang ED - Nothnagel, Reinhard ED - Twelmeier, Heiko T1 - Mechanischer Hintergrund der Wirkungsweise der aufgeklebten Bewehrung T2 - Baustoff und Konstruktion - Festschrift zum 60. Geburtstag von Harald Budelmann N2 - Die Wirkungsweise einer aufgeklebten Biegezugverstärkung kann aufgrund der umfangreichen Forschung der letzten Jahrzehnte nun gut beschrieben werden. Eine wesentliche Rolle spielt hierbei der Verbund zwischen Beton und aufgeklebter Bewehrung, welcher durch die mäßige Zugfestigkeit der oberflächennahen Betonschichten charakterisiert wird. Dieser Aufsatz gibt einen historisch orientierten Abriss der Entwicklung des derzeitigen Kenntnisstands zur mechanischen Beschreibung der Wirkungsweise der aufgeklebten Bewehrung an. Dazu wird zunächst auf das Verbundverhalten der aufgeklebten Bewehrung sowie die übertragung auf das Bauteil und danach auf den weiteren Einfluss des Verbundes auf das Bauteilverhalten eingegangen. Y1 - 2013 SN - 978-3-642-29572-0 SN - 978-3-642-29573-7 U6 - https://doi.org/10.1007/978-3-642-29573-7_26 SP - 243 EP - 261 PB - Springer CY - Wiesbaden ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Schmitt, Alexander A1 - Zilch, Konrad ED - Zilch, Konrad T1 - Beispiel 2: Verstärkung einer Platte mit in Schlitze verklebten CFK-Lamellen T2 - Erläuterungen und Beispiele zur DAfStb-Richtlinie "Verstärken von Betonbauteilen mit geklebter Bewehrung" KW - Betonbauteil KW - Bewehrung KW - Lamelle KW - Kohlenstofffaserverstärkter Kunststoff KW - Kleben KW - Tragfähigkeit KW - Bemessung KW - Gewirke KW - Kohlenstoffaser Y1 - 2013 SN - 978-3-410-65245-8 SN - 0171-7197 SP - 65 EP - 82 PB - Beuth CY - Berlin ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Schmitt, Alexander A1 - Zilch, Konrad ED - Zilch, Konrad T1 - Beispiel 1: Verstärkung einer Platte mit aufgeklebten CFK-Lamellen T2 - Erläuterungen und Beispiele zur DAfStb-Richtlinie "Verstärken von Betonbauteilen mit geklebter Bewehrung" KW - Betonbauteil KW - Bewehrung KW - Lamelle KW - Kohlenstofffaserverstärkter Kunststoff KW - Kleben KW - Tragfähigkeit KW - Bemessung KW - Gewirke KW - Kohlenstoffaser Y1 - 2013 SN - 978-3-410-65245-8 SN - 0171-7197 SP - 45 EP - 64 PB - Beuth CY - Berlin ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Niedermeier, Roland ED - Zilch, Konrad T1 - Beispiel 4: Verstärkung einer Stahlbetonstütze durch Umwicklung T2 - Erläuterungen und Beispiele zur DAfStb-Richtlinie "Verstärken von Betonbauteilen mit geklebter Bewehrung" KW - Betonbauteil KW - Bewehrung KW - Lamelle KW - Kohlenstofffaserverstärkter Kunststoff KW - Kleben KW - Tragfähigkeit KW - Bemessung KW - Gewirke KW - Kohlenstoffaser Y1 - 2013 SN - 978-3-410-65245-8 SN - 0171-7197 SP - 109 EP - 119 PB - Beuth CY - Berlin ER - TY - CHAP A1 - Zilch, Konrad A1 - Finckh, Wolfgang ED - Fuchs, Werner T1 - Erweiterung der Verbundmodelle auf eingeschlitzte Bewehrung T2 - Befestigungstechnik, Bewehrungstechnik und ... Teil 2 : Rolf Eligehausen zum 70. Geburtstag Y1 - 2012 SN - 978-3-8982-1208-3 SP - 577 EP - 590 PB - ibidem-Verl. CY - Stuttgart ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Niedermeier, Roland A1 - Schmitt, Alexander A1 - Zilch, Konrad T1 - Example 3: Strengthening a T-beam with externally bonded CFRP strips T2 - Commentary on the DAfStb guideline "Strengthening of concrete members with adhesively bonded reinforcement" with examples KW - Betonbauteil KW - Bewehrung KW - Lamelle KW - Kohlenstofffaserverstärkter Kunststoff KW - Kleben KW - Tragfähigkeit KW - Bemessung KW - Gewirke KW - Kohlenstoffaser Y1 - 2014 SN - 978-3-410-65255-7 SN - 0171-7197 SP - 115 EP - 125 PB - Beuth CY - Berlin ; Wien ; Zürich ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Schmitt, Alexander A1 - Zilch, Konrad T1 - Example 2: Strengthening a slab with near surface mounted CFRP strips T2 - Commentary on the DAfStb guideline "Strengthening of concrete members with adhesively bonded reinforcement" with examples KW - Betonbauteil KW - Bewehrung KW - Lamelle KW - Kohlenstofffaserverstärkter Kunststoff KW - Kleben KW - Tragfähigkeit KW - Bemessung KW - Gewirke KW - Kohlenstoffaser Y1 - 2014 SN - 978-3-410-65255-7 SN - 0171-7197 SP - 69 EP - 86 PB - Beuth CY - Berlin ; Wien ; Zürich ER - TY - CHAP A1 - Zilch, Konrad A1 - Niedermeier, Roland A1 - Finckh, Wolfgang ED - Bergmeister, Konrad ED - Fingerloos, Frank ED - Wörner, Johann-Dietrich T1 - Verstärken von Betonbauteilen mit geklebter Bewehrung - Erläuterungen zur DAfStb-Richtlinie T2 - Beton-Kalender 2013 : Lebensdauer und Instandsetzung, Brandschutz Y1 - 2014 SN - 978-3-433-60546-2 U6 - https://doi.org/10.1002/9783433602591.ch6 SP - 469 EP - 552 PB - Ernst & Sohn CY - Berlin ER - TY - CHAP A1 - Zilch, Konrad A1 - Niedermeier, Roland A1 - Finckh, Wolfgang ED - Oehlers, Deric John ED - Griffith, Michael C. ED - Seracino, R. T1 - Guideline for the Performance and Interpretation of Bond Tests on Concrete Specimens with Externally Bonded CFRP Strips T2 - Proceedings of the 9th International Symposium on Fibre Reinforced Polymers in Reinforced Concrete Structures (FRPRCS-9), 13.07. - 15.07.2009, Sydney, Australia Y1 - 2009 SN - 978-0-9806755-0-4 PB - [Univ ersity of Adelaide] CY - [Adelaide] ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Zilch, Konrad A1 - Niedermeier, Roland T1 - Verstärken mit Kohlenstofffaserverbundwerkstoffen T2 - DAfStb-Forschungskolloquium: Beiträge zum 50. Forschungskolloquium des DAfStb am 8./9. Oktober 2009 an der Technischen Universität München Y1 - 2009 SP - 35 EP - 44 CY - Berlin ER - TY - CHAP A1 - Zilch, Konrad A1 - Finckh, Wolfgang T1 - Verstärkung von Betonkonstruktionen mit CFK-Werkstoffen T2 - Proceedings / 53. BetonTage : building the future Y1 - 2009 SP - 174 PB - Bauverl. CY - Gütersloh ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Zilch, Konrad A1 - Ellinger, Mathias ED - Motavalli, Masoud T1 - Evaluating the bond stress relationship of externally bonded CFRP-strips at the intermediate crack element T2 - Smart monitoring, assessment and rehabilitation of civil structures : proceedings of SMAR 2011, First Middle East Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures, Dubai, UAE, 8-10 February 2011 at AUD, American University in Dubai UAE N2 - When reinforced concrete is strengthened by using externally bonded CFRP strips it is not sufficient to perform checks just for the end anchorages. The bond forces must be transferred where the load is applied. These bond forces may be transferred by the elements in between flexural cracks which are mainly influenced by the bond behavior of the internal and external reinforcing. Therefore the models which were derived from end anchorage tests must be expanded to include other effects as well. These models were first described theoretically by the differential equation of bond and a bilinear bond stress slippage relationship. To evaluate this theoretically derived relationship numerous experiments on the intermediate crack elements where conducted. In this paper, an evaluation of these experiments in two different ways is shown. The one evaluation is carried out only on the fracture force, the other analysis also takes the slippage occurred in the intermediate crack element tests into account. With both evaluations it can be shown, that besides the previously scheduled bilinear bond approach additional friction effects between the already decoupled fracture surfaces of the bonded strips occur. Y1 - 2011 UR - https://data.smar-conferences.org/SMAR_2011_Proceedings/papers/97.pdf SN - 978-3-905594-58-4 SP - 1 EP - 9 PB - EMPA CY - [Dübendorf] ET - 1 CD-ROM ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Zilch, Konrad ED - Ye, Lieping ED - Feng, Peng ED - Yue, Qingrui T1 - Evaluation of the bond behavior at the intermediate crack element with a special test procedure T2 - Advances in FRP Composites in Civil Engineering : Proceedings of the 5th International Conference on FRP Composites in Civil Engineering (CICE 2010), Sep 27-29, 2010, Beijing, China N2 - The bond behavior of externally bonded reinforcement is one main parameter for the load bearing capacity of strengthened reinforced concrete structures. Because of the low bond force transfer at the outmost bending crack, the bond forces have also been transferred to elements between the cracks in order to effectively utilize the permissible stress of the CFRP strip. Two different experimental series on the bond behavior on the intermediate crack element were carried out. Small tests on an idealized intermediate crack element were made to evaluate the bond stress increase. In the second series parts of a structural element, which had the length of an intermediate crack element were tested to find out about other effects which only occur in the structural element. Based on these experimental data and the differential equation of the sway bond a new concept for the bond behavior of externally bonded reinforcement has been found out. Y1 - 2011 SN - 978-3-642-17486-5 SN - 978-3-642-17487-2 U6 - https://doi.org/10.1007/978-3-642-17487-2_111 SP - 517 EP - 520 PB - Springer CY - Berlin ; Heidelberg ER - TY - CHAP A1 - Zilch, Konrad A1 - Niedermeier, Roland A1 - Finckh, Wolfgang ED - Motavalli, Masoud T1 - New German guideline for strengthening concrete structures with adhesive bonded reinforcement T2 - Smart monitoring, assessment and rehabilitation of civil structures, Proceedings of SMAR 2011, First Middle East Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures, Dubai, UAE, 8 - 10 February 2011 at AUD, American University in Dubai UAE Y1 - 2011 SN - 978-3-905594-58-4 PB - EMPA ET - 1 CD-ROM Ill., graph. Darst. 1 Buch (212 S.) ER - TY - CHAP A1 - Gläser, Christian A1 - Jung-Saeng, A. A1 - Finckh, Wolfgang T1 - Recent developments of spliced segmental griders using enhanced post tensioning systems T2 - Third international fib congress incorporating the PCI annual convention and bridge conference 2010, May 29-June 2, 2010, Washington, D.C. Y1 - 2010 PB - Precast/Prestressed Concrete Institute, CY - Chicago, IL ET - 1 DVD-ROM ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Zilch, Konrad T1 - Influence of the curvature on the bond force transfer of EBR T2 - 10th International Symposium on Fiber-Reinforced Polymer Reinforcement for Concrete Structures 2011 : Tampa, Florida, USA, 2 - 4 April 2011 KW - Beton KW - Faserverstärkter Kunststoff Y1 - 2011 SN - 978-1-61839-203-9 PB - Curran CY - Red Hook, NY ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Zilch, Konrad A1 - Niedermeier, Roland T1 - DAfStb-Richtlinie: „Verstärken von Betonbauteilen mit geklebter Bewehrung –Bemessung T2 - 14. Münchener Massivbau Seminar 2010 Y1 - 2010 PB - Förderverein Massivbau der TU München e.V. CY - München ET - CD-ROM ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Zilch, Konrad T1 - Specific structural effects on the bond force transfer of reinforced concrete strengthened with externally bonded CFRP-strips T2 - Building Materials and Building Technology to Preserve the Built Heritage Y1 - 2011 SN - 978-3-937066-21-9 CY - Brno ER - TY - CHAP A1 - Finckh, Wolfgang T1 - Einfluss bauteilspezifischer Effekte auf die Bemessung von mit CFK-Lamellen verstärkten Stahlbetonbauteilen T2 - Beiträge zum Doktorandensymposium 2010, 51. Forschungskolloquium des DAfStb, 11.-12.11.2010, TU Kaiserslautern Y1 - 2010 PB - Deutscher Auschuss für Stahlbeton ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Zilch, Konrad T1 - Strengthening and rehabilitation of reinforced concrete slabs with CFRP T2 - International conference on high rise towers and tall building 2010, April 14-16, Munich Y1 - 2010 CY - München ER - TY - CHAP A1 - Finckh, Wolfgang T1 - EN 1992-1-1 Chapter 7.3: Crack Control – PRB Suggestions for Improvement T2 - Proceedings of the First PRB-Workshop on Contributions for the Ease of Use of the Eurocodes, 4th and 5th December 2014, Berlin Y1 - 2014 SN - 978-3-410-25201-6 SP - 79 EP - 80 PB - Praxisgerechte Regelwerke im Bauwesen e.V. CY - Berlin ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Zilch, Konrad T1 - Practical-Orientated Full-Scale Tests In Comparison With Bond Checks of Different Guidelines T2 - The Third Asia-Pacific Conference on FRP in Structures (APFIS2012), 2 to 4 February 2012, Sapporo, Japan Y1 - 2012 CY - Sapporo ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Zilch, Konrad T1 - Specific structural effects by strengthening pre-stressed concrete beams with externally bonded FRP T2 - 6th International Conference on FRP Composites in Civil Engineering; CICE 2012 Rome ; 13-15 June Y1 - 2012 PB - Sapienza Universita de Roma CY - Rom ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Zilch, Konrad T1 - Influence of shear crack offsets on the bond behavior of EBR at the intermediate crack element T2 - 6th International Conference on FRP Composites in Civil Engineering : CICE 2012 Rome ; 13-15 June Y1 - 2012 PB - Sapienza Universita de Roma CY - Rom ET - CD-ROM ER - TY - GEN A1 - Schermer, Detleff ED - Schermer, Detleff ED - Brehm, Eric T1 - Mauerwerk-Kalender 2023 BT - Schwerpunkte: Instandsetzung; Erdbeben; Lehmbau Y1 - 2023 SN - 978-3-433-03374-6 PB - Ernst & Sohn GmbH CY - Berlin ET - 48. Jahrgang ER - TY - CHAP A1 - Zilch, Konrad A1 - Finckh, Wolfgang T1 - Erweiterung der Verbundmodelle auf eingeschlitzte CFK-Bewehrung T2 - Befestigungstechnik, Bewehrungstechnik und … Y1 - 2012 SN - 978-3-8982-1208-3 PB - ibidem CY - Stuttgart ER - TY - BOOK A1 - Finckh, Wolfgang T1 - Stahlbetonkonstruktion 2 BT - Von der Bauteilberechnung über die Bemessung zur Bauwerksplanung N2 - Aufbauend auf dem ersten Teil „Stahlbetonkonstruktion“ werden in diesem Teil erweiterte Grundlagen der Stahlbetonberechnung erläutert. Neben den Torsionsnachweisen, dem genaueren Verfahren zur Durchbiegeberechnung und den Schnittgrößenumlagerungen werden vor allem besonders häufig vorkommende Stahlbetonbauteile behandelt. Zu diesen Bauteilen zählen Aussteifungssysteme, Bodenplatten, Fundamente, liniengelagerte Platten sowie Elementdecken. Hierbei werden bei diesen Bauteilen, welche nahezu in jedem Bauwerk vorkommen, sowohl die Ermittlung der Schnittgrößen wie auch die Bemessung und konstruktive Durchbildung erklärt. Zusätzlich wird in diesem Lehrbuch auch die Bemessung des Werkstoffes Stahlfaserbeton, welcher insbesondere bei Bodenplatten im Industriebau verwendet wird, erläutert. Die im Lehrbuch vorgestellten theoretischen Grundlagen werden anhand zahlreicher Abbildungen verdeutlicht. In jedem Kapitel sind zum besseren Verständnis umfangreiche Bemessungsbeispiele mit Praxisbezug enthalten. Nach der erfolgreichen Lektüre des ersten Bandes der Reihe „Stahlbetonkonstruktion“ wird in diesem zweiten Band das Wissen gefestigt und stark erweitert. Dies ermöglicht dem Lesenden einen sicheren Umgang mit dem Werkstoff Stahlbeton. KW - Stahlbetonkonstruktion KW - Stahlbetonbau KW - Torsion KW - Aussteifung KW - Fundamente KW - Verbundfugen KW - Torsionsbemessung KW - Platten KW - Aussteifung von Gebäuden KW - Bodenplatten KW - Durchbiegung KW - Schnittgrößenumlagerung KW - Stahlfaserbeton Y1 - 2024 SN - 9783658449605 U6 - https://doi.org/10.1007/978-3-658-44961-2 SN - 2524-8693 PB - Springer Fachmedien Wiesbaden CY - Wiesbaden ER - TY - BOOK A1 - Finckh, Wolfgang T1 - Verstärken von Betonbauteilen BT - Tragwerksplanung im Bestand N2 - Dieses Lehrbuch widmet sich dem Bauen im Bestand mit Betonbauteilen und den dabei häufig vorkommenden Verstärkungsmaßnahmen. Dazu wird zunächst das Sicherheitskonzept bestehender Bauteile erläutert. Darauf aufbauend wird die Analyse der Bestandsmaterialien und das Vorgehen bei einer Analyse des Tragverhaltens des Bestandsbauteils bzw. einer Nachrechnung behandelt. Die weiteren Kapitel des Buches beschäftigen sich mit dem Verstärken der bestehenden Betonbauteile. Hierbei werden alle gängigen Verstärkungen im Stahlbetonbau, wie das Verstärken mit geklebter Bewehrung, Carbonbeton, Betonschrauben und das Verstärken mittels Auf- und Spritzbeton, erklärt. Dabei werden bei allen Verfahren die Gemeinsamkeiten, die Unterschiede sowie die sinnvollsten Anwendungsgebiete herausgearbeitet. Die theoretischen Grundlagen werden anhand zahlreicher Abbildungen verdeutlicht. In jedem Kapitel sind zum besseren Verständnis umfangreiche Bemessungsbeispiele mit Praxisbezug enthalten. Die erfolgreiche Lektüre dieses Buches ermöglicht dem Lesenden, sich den tragwerksplanerischen Aufgaben von bestehenden Betonbauwerken zu stellen und Verstärkungsmaßnahmen zu berechnen. KW - Bestandsbeton KW - Bauen im Bestand KW - Bewertung KW - Verstärken KW - CFK-Lamellen KW - Carbonbeton KW - Sicherheitskonzept KW - Spritzbeton KW - Aufbeton KW - Sützenverstärkung KW - Schubverbinder KW - Betonschrauben KW - Biegeverstärkung KW - Querkraftverstärkung Y1 - 2024 SN - 9783658458560 U6 - https://doi.org/10.1007/978-3-658-45857-7 SN - 2524-8693 PB - Springer Fachmedien Wiesbaden CY - Wiesbaden ER - TY - BOOK A1 - Finckh, Wolfgang T1 - Mit Stabwerkmodellen zur Bewehrungsführung: Detailnachweise im Stahlbetonbau N2 - Aufbauend auf den Grundlagen des Stahlbetonbaus wird in diesem Lehrbuch das Konzept der Bemessung von Stahlbetonkonstruktionen mittels Stabwerkmodellen erläutert. Dieses Bemessungskonzept wird insbesondere im Bereich der Detailnachweise und bei gedrungenen Tragwerken im Stahlbetonbau benötigt. Neben der generellen Modellbildung und Nachweismethodik werden auch die üblichen Modelle und Nachweise für häufig vorkommende Details vorgestellt. Hierbei werden insbesondere Krafteinleitungsbereiche, Konsolen, ausgeklinkte Auflager, Rahmenknoten, Querschnittssprünge, Trägeröffnungen und Wandartige Träger detailliert behandelt. Die im Lehrbuch vorgestellten theoretische Grundlagen werden anhand zahlreicher Abbildungen erläuterten. In jedem Kapitel sind zum besseren Verständnis umfangreiche Bemessungsbeispiele mit Praxisbezug enthalten. KW - Abgesetzte Auflager KW - Auflager KW - Druckkräfte KW - Konsolen KW - Stabkräfte KW - Stabwerk KW - Stabwerksmodelle KW - Stegöffnungen KW - Wandartige Träger KW - Zugkräfte Y1 - 2023 SN - 978-3-658-40881-7 U6 - https://doi.org/10.1007/978-3-658-40882-4 PB - Springer Fachmedien CY - Wiesbaden ER - TY - BOOK A1 - Finckh, Wolfgang T1 - Stahlbetonkonstruktion BT - von der Bemessung über die Konstruktionsregeln zum Bewehrungsplan N2 - Die Grundlagen der Berechnung von Stahlbetonbauteilen werden in diesem Lehrbuch anhand der mechanischen Beziehungen erläutert. Ausgehend von den Nachweisen für Biegung und Querkraft werden auch die Berechnungen für die im Hochbau üblichen Stahlbetonbauteile, wie Balken, Platten, Stützen und Flachdecken erarbeitet. Neben den Nachweisen für Trag- und Gebrauchstauglichkeit werden aufbauend auf den Bemessungsergebnissen die Konstruktionsregeln und Bewehrungsführungen umfangreich dargestellt. Die im Lehrbuch vorgestellten theoretischen Grundlagen werden anhand zahlreicher Abbildungen erläutert. In jedem Kapitel sind zum besseren Verständnis umfangreiche Bemessungsbeispiele mit Praxisbezug enthalten. Um die LeserInnen für die Baupraxis vorzubereiten, werden auch die Erstellung von statischen Berechnungen, Schalplänen und von Bewehrungsplänen behandelt. Damit wird für den Hochbau eine umfassende Basis des Stahlbetonbaus vermittelt, welche einen erfolgreichen Start ins Berufsleben gewährleistet. KW - Abgesetzte Auflager KW - Bewehrung, Bewehrungsführung KW - Krafteinleitungsbereiche KW - Modellbildung KW - Rahmenknoten KW - Stabwerksmodelle KW - Stegöffnungen KW - Wandartige Träger Y1 - 2023 SN - 978-3-658-41336-1 U6 - https://doi.org/10.1007/978-3-658-41336-1 PB - Springer Fachmedien CY - Wiesbaden ER - TY - GEN A1 - Schermer, Detleff T1 - Test set-up and proposed testing procedure for the determination of masonry walls under in-plane shear loadings : Brick and Block Masonry: Trends, Innovations and Challenges T2 - Proceedings of the 16th International Brick and Block Masonry Conference (IMAC), Padova, Italy, 26-30 June 2016 Y1 - 2016 SP - 1883 EP - 1888 PB - Routledge ER - TY - JOUR A1 - Schermer, Detleff A1 - Meyer, Udo Joachim A1 - Lutman, Marjana A1 - Triller, Petra T1 - Shear tests on full scale storey-height specimens constructed with thermally insulating clay unit masonry with thin-layer mortar JF - Mauerwerk N2 - The paper presents results of a series of 6 in-plane shear tests on storey-height clay unit masonry panels [1] with thin-layer mortar, carried out in addition to previous test campaigns [2], [3], and [4]. The walls were constructed with unfilled thermally insulating clay units with a thermal conductivity of lambda = 0.09 W/(m . K). The current design rules for clay unit masonry according to DIN EN 1996-1-1/NA [5] are conservative compared to the presented test results for thermally insulating clay unit masonry. KW - clay units KW - design KW - in-plane shear KW - test methods KW - thin-layer mortar KW - WALLS Y1 - 2019 U6 - https://doi.org/10.1002/dama.201900025 SN - 1432-3427 VL - 23 IS - 6 SP - 378 EP - 386 PB - Ernst & Sohn ER - TY - JOUR A1 - Schermer, Detleff A1 - Schmalz, Jonathan A1 - Meyer, Udo Joachim A1 - Gams, Matija A1 - Lutman, Marjana A1 - Triller, Petra T1 - Shear tests on thermal insulating clay unit masonry walls with thin layer mortar JF - Mauerwerk N2 - The paper presents the results of 20 shear tests on full scale thermal insulating clay unit masonry walls. The types of units used (units with large chambers filled with mineral wool pads and units with small corings filled with mineral wool granulate) as well as the tested wall geometries and vertical loads are representative of the most common wall constructions currently used in housing in Germany. The aim of the investigations was the verification of the shear -resistance of thermal insulating clay unit masonry under realistic conditions and comparison with the design rules in the codes and national technical approvals. The current design rules for clay unit masonry in DIN EN 1996-1-1/NA are rather conservative compared to the test results for thermal insulating units. KW - design KW - experimental testing KW - high precision clay masonry units KW - masonry with thin layer mortar KW - shear KW - thin layer mortar Y1 - 2018 U6 - https://doi.org/10.1002/dama.201800028 VL - 22 IS - 6 SP - 385 EP - 398 PB - Ernst & Sohn, a Wiley brand ER - TY - CHAP A1 - Schermer, Detleff ED - Zilch, Konrad T1 - Bemessung von Mauerwerk T2 - Konstruktiver Ingenieurbau und Hochbau: Technik, Organisation, Wirtschaftlichkeit. N2 - Die Bemessung von Mauerwerk deckt neben der Tragfähigkeit auch den Nachweis der Gebrauchstauglichkeit ab. Im Beitrag werden die Grundanforderungen und Hintergründe der Bemessung von Mauerwerk dargelegt und die Lösungen nach den aktuellen Vorschriften von Eurocode 6 und dem Nationalen Anhang erläutert. Y1 - 2024 SN - 978-3-658-29498-4 U6 - https://doi.org/10.1007/978-3-658-29498-4_66 SP - 443 EP - 473 PB - Springer Fachmedien CY - Wiesbaden ER - TY - CHAP A1 - Finckh, Wolfgang A1 - Zilch, Konrad ED - Ye, Lieping ED - Feng, Peng ED - Yue, Qingrui T1 - Shear capacity of flexural strengthened reinforced concrete structures with CFRP materials T2 - Advances in FRP Composites in Civil Engineering - Proceedings of the 5th International Conference on FRP Composites in Civil Engineering (CICE 2010), Sep 27-29, 2010, Beijing, China N2 - By enlarging the flexural capacity of reinforced concrete structures with externally bonded CRFP materials the shear behavior is also affected. To evaluate this effect shear tests on flexural strengthened reinforced concrete beams were carried out. Half of the tests were done with externally bonded CFRP-strips and the other half with near surface mounted reinforcement. Based on these tests and the EC2 approach for the shear force was checked. KW - Concrete Beam KW - Shear Capacity KW - Shear Reinforcement KW - Shear Span KW - CFRP Strip Y1 - 2011 SN - 978-3-642-17486-5 SN - 978-3-642-17487-2 U6 - https://doi.org/10.1007/978-3-642-17487-2_175 PB - Springer CY - Berlin ; Heidelberg ER - TY - GEN A1 - Meißner, Jonathan A1 - Schermer, Detleff A1 - Amberger, Franziska A1 - Hofmann, Philipp ED - Milani, Gabriele ED - Ghiassi, Bahman T1 - Eccentric partial compression tests on wall test specimens T2 - 18th International Brick and Block Masonry Conference : Proceedings of IB2MaC 2024 Volume 2, 21.-24. July 2024, Birmingham N2 - Within the scope of this work, the objective was to transfer the stress situations resulting at the exterior wall-floor joint as partial area loads to wall test specimens. The actual load-bearing capacities of highly thermally insulating plane clay unit masonry are to be quantified and compared with the calculated load-bearing capacities based on the unconfined stress-strain relationship and the linear-elastic, quasi-ductile and rigid-plastic material behaviour. In order to record also the deformations and compression at cross-section level directly in the load application area as well as the curvatures at system level, the deformations of all test specimens are documented by means of optical deformation measurement (digital image correlation). In this way, not only the load-bearing capacity but also, in particular, the stress resp. Strain distribution and stress redistributions as well as the experimental moment-curvature relationship can be quantified for the further analytical considerations and evaluations. Accordingly, it can be determined for all eccentric partial area loads that, regardless of the loading situation, higher load bearing capacities are achieved both compared to the calculated bearing capacity and based on a rigid-plastic material behaviour. Especially in the case of the loading situation at the bottom of the walls with partially supported floors, the activation of the unloaded cross-sectional zone at the load transfer can be shown very well based on the photogrammetrically determined cross-sectional compression. The decoupling initiated by the local discontinuity of the stress-strain state occurs only after the rigid-plastic cross-sectional bearing capacity is reached. Y1 - 2025 SN - 978-3-031-73309-3 U6 - https://doi.org/10.1007/978-3-031-73310-9_16 VL - 2025 SP - 223 EP - 238 PB - Springer ER - TY - CHAP A1 - Hofmann, Philipp A1 - Schermer, Detleff A1 - Amberger, Franziska A1 - Meißner, Jonathan ED - Ghiassi, Bahman ED - Milani, Gabriele T1 - Experimental investigation at the exterior wall-floor joint with partially supported slabs T2 - 18th International Brick and Block Masonry Conference : Proceedings of IB2MaC 2024 Volume 2, 21.-24. July 2024, Birmingham N2 - The objective of the extensive experimental investigations at the exterior wall-floor joint on a scale of 1:1 on highly thermally insulating clay unit masonry was to record the interaction between the acting axial force and the resulting slab rotation as a result of defined slab fixed end moments. The focus of this test series was on the influence of the nonlinear system behaviour at different axial force-moment combinations caused by the gaping of the horizontal joints as well as the contact zone between slab and masonry. With knowledge of the moment-rotation interaction as a function of the axial force of the wall, a numerical model can be developed with regard to the nonlinear system behaviour. Since the angle of rotation of the slab is of major importance in this respect, the structural design of a reinforced concrete slab is dispensed with in the test and replaced by a flexurally rigid solid steel bracket. This has the decisive advantage that the rotation of the steel bracket can be precisely detected by means of optical deformation measurement (digital image correlation) and directly assigned to the existing axial force-moment combinations. The evaluation of the tests has shown that the dominant nonlinear effect is essentially due to the gaping of the horizontal joints in the exterior wall-floor joint. During the test execution, the proportionality limit between the bracket moment and the bracket rotation could be successively increased with increasing load level regardless of the previous nonlinear system behaviour. Y1 - 2025 SN - 978-3-031-73309-3 U6 - https://doi.org/10.1007/978-3-031-73310-9_18 SP - 254 EP - 265 PB - Springer CY - Cham ER - TY - CHAP A1 - Meißner, Jonathan A1 - Schermer, Detleff A1 - Amberger, Franziska A1 - Hofmann, Philipp ED - Milani, Gabriele ED - Ghiassi, Bahman T1 - Experimental investigations on the influence of eccentric load application on the load bearing capacity of clay unit masonry walls T2 - 18th International Brick and Block Masonry Conference : Proceedings of IB2MaC 2024 Volume 2, 21.-24. July 2024, Birmingham N2 - For the analysis of centric and double-eccentric wall compression tests, a comprehensive database of different highly thermally insulating clay unit types is being compiled for the first time. The objective of the analysis is, on the one hand, to characterise the load-deformation behaviour of highly thermally insulating clay unit masonry and, on the other hand, to analyse the resulting stress distribution at the cross-section level. In addition, the influence of the increasing load inclination angle with decreasing test specimen slenderness is also shown. With regard to the wall compression tests under double-eccentric loading, the effects caused by the load inclination become obvious and lead to an average reduction of the load-bearing capacity of 41% compared to the centric compression tests. Furthermore, an opposite effect can also be observed with regard to the generally known interaction between decreasing specimen slenderness and increasing load-bearing capacity. According to this, lower load-bearing capacities result with constant eccentricity and decreasing slenderness, so that a back calculation to a uniform slenderness ratio with the relevant normalisation functions is not possible. The reason for this is due to the linearly increasing load inclination angle and the resulting increasing shear stress within the transverse webs. Y1 - 2025 SN - 978-3-031-73309-3 U6 - https://doi.org/10.1007/978-3-031-73310-9_17 SP - 239 EP - 253 PB - Springer CY - Cham ER - TY - CHAP A1 - Schermer, Detleff A1 - Meißner, Jonathan A1 - Amberger, Franziska A1 - Hofmann, Philipp ED - Ghiassi, Bahman ED - Milani, Gabriele T1 - Numerical investigation for nonlinear internal forces at the exterior wall-floor joints T2 - 18th International Brick and Block Masonry Conference : Proceedings of IB2MaC 2024 Volume 2, 21.-24. July 2024, Birmingham N2 - The objective of the presented work is the analysis of the numerically determined nodal moments at the exterior wall-floor joint compared to the linear-elastic calculation of a frame section according to Annex C of Eurocode 6, Part 1–1 (EN 1996-1-1). The focus of the comparative analysis is the influence of the structural nonlinearity of the exterior wall-floor joint as well as the acting wall axial force, which are explicitly captured in the FE model in contrast to the linear-elastic frame section. In particular, the contact zone is of special importance for partially supported floor and the associated discontinuous stress distribution between the exterior wall and slab. The reason for this is the fact that the transition zone between the masonry wall and the slab behaves in a highly nonlinear manner due to the lack of tensile strength. The related eccentricity e/a required for the ultimate limit state design is thus significantly influenced by the interaction of the axial force and the resulting joint rotations. Y1 - 2025 SN - 978-3-031-73310-9 U6 - https://doi.org/10.1007/978-3-031-73310-9_19 SP - 266 EP - 279 PB - Springer CY - Cham ER - TY - CHAP A1 - Schermer, Detleff ED - Albert, Andrej T1 - Kapitel 7A: Mauerwerksbau T2 - Schneider Bautabellen für Ingenieure : mit Berechnungshinweisen und Beispielen Y1 - 2024 SN - 978-3-8462-1479-4 PB - Reguvis CY - Köln ET - 26. aktualisierte Auflage ER - TY - CHAP A1 - Hofmann, Philipp A1 - Schermer, Detleff A1 - Amberger, Franziska A1 - Meißner, Jonathan ED - Ghiassi, Bahman ED - Milani, Gabriele T1 - Substitute test method for the local load bearing capacity of masonry with partially supported slabs T2 - 18th International Brick and Block Masonry Conference : Proceedings of IB2MaC 2024 Volume 2, 21.-24. July 2024, Birmingham N2 - With increasing thermal insulation requirements and resource-efficient construction methods, demands on building exterior walls are rising. Monolithic exterior walls, devoid of additional insulation, require meticulous planning and execution of the exterior wall-floor joint. Besides addressing building physics, fire safety, and sustainable construction, this detail must meet structural analysis standards. The joint’s load-bearing capacity hinges on both the masonry wall and slab loads. Masonry walls primarily bear loads from slabs and roof structures. However, slab loads induce rotation, adding bending stress to the masonry. Bending transmission depends on structural design, material parameters, and axial force, creating parameter interactions. To scrutinize various products and design variants regarding contact stiffness, load distribution, and stress concentrations, the Laboratory for Structural Engineering at the University of Applied Sciences (OTH) in Regensburg, Germany developed specific testing methods. These methods realistically capture load redistribution effects based on perforation patterns and quantify potential loadbearing reserves. Additionally, optimising design regulations based on results can accurately describe masonry’s load-deformation behaviour. Y1 - 2025 SN - 978-3-031-73310-9 U6 - https://doi.org/10.1007/978-3-031-73310-9_21 SP - 294 EP - 307 PB - Springer CY - Cham ER - TY - CHAP A1 - Amberger, Franziska A1 - Schermer, Detleff A1 - Hofmann, Philipp A1 - Meißner, Jonathan ED - Ghiassi, Bahman ED - Milani, Gabriele T1 - Shear tests on thermal insulating clay unit masonry walls T2 - 18th International Brick and Block Masonry Conference : Proceedings of IB2MaC 2024 Volume 2, 21.-24. July 2024, Birmingham N2 - Masonry made of highly insulating clay units is a very common construction method, especially in multi-storey residential buildings. To apply this type of construction also in earthquake proven areas, the characterisation of strength and deformation properties under cyclic horizontal loads is essential. For this, a series of full-scale experimental investigations on the behaviour of walls made of thermally insulating clay unit masonry under combined loadings (N-M-V) were carried out in the Laboratory for Structural Engineering at the University of Applied Sciences Regensburg (OTH), Germany. The aim of the static-cyclic tests was to characterise the load-deformation behaviour and the failure mechanism under earthquake loadings. In conventional buildings, stiffening walls are loaded by vertical axial forces and horizontal in-plane loadings. The interaction with the concrete floor slabs leads to restraining effects in real buildings, which create counteracting bending moments. Accordingly, in the test, the loads were applied by a combined loading of bending moment and axial force. Digital image correlation documented deformations to identify failure mechanism. Results indicate that current design approaches according to DIN EN 1996-1-1 are on the safe side regarding the load-bearing capacity of the tested walls contain load-bearing capacity reserves. Based on the failure patterns from digital image correlation, it can be recognised that a strict separation of the individual failure types does not appear to make sense, as the ultimate failure of the test specimens was caused by a combination of several failure types. Y1 - 2025 SN - 978-3-031-73310-9 U6 - https://doi.org/10.1007/978-3-031-73310-9_3 SP - 31 EP - 43 PB - Springer CY - Cham ER - TY - CHAP A1 - Meißner, Jonathan A1 - Schermer, Detleff A1 - Amberger, Franziska A1 - Hofmann, Philipp ED - Schermer, Detleff ED - Brehm, Eric T1 - Experimentelle und numerische Untersuchungen am Außenwand-Decken-Knoten T2 - Mauerwerk-Kalender 2025 Y1 - 2025 SN - 978-3-433-03445-3 U6 - https://doi.org/10.1002/9783433612019.ch17 VL - 50 SP - 367 EP - 414 PB - Ernst & Sohn Verlag CY - Berlin ER -