TY - JOUR A1 - Wiesent, Lisa A1 - Schultheiß, Ulrich A1 - Lulla, Philipp A1 - Nonn, Aida A1 - Noster, Ulf T1 - Mechanical properties of small structures built by selective laser melting 316 L stainless steel – a phenomenological approach to improve component design JF - Materials Science & Engineering Technology JF - Materialwissenschaft und Werkstofftechnik N2 - Experimental investigations are conducted to quantify the influence of specimen thickness and orientation on the mechanical properties of selective laser melted stainless steel 316 L. The results indicate that the mechanical strength and ductility increase with increasing specimen thickness until a saturation value is reached from a specimen thickness of about 2 mm. Specimen orientation dependency is pronounced for thin specimens (<1.5 mm), whereas only small deviations in strength are observed for thicker specimens with orientations of 30°, 45° and 90° to build direction. The mechanical properties of the specimen orientation of 0° to build direction shows great deviation to the other orientations and the smallest overall strength. A reliable design of selective laser melted components should account for specimen thickness and orientation, e. g. by a correction factor. Furthermore, it is recommended to avoid loads vertical (90°) and parallel (0°) to build direction to guarantee higher ductility and strength. T2 - Mechanische Eigenschaften von kleinen Strukturen aus selektiv lasergeschmolzenem 316 L Edelstahl – ein phänomenologischer Ansatz zur Verbesserung des Bauteildesigns Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-14718 N1 - Corresponding author: Lisa Wiesent VL - 51 IS - 12 SP - 1615 EP - 1629 PB - Wiley ER - TY - JOUR A1 - Kovalev, Alexander A1 - Belyaeva, Inna A. A1 - von Hofen, Christian A1 - Gorb, Stanislav A1 - Shamonin (Chamonine), Mikhail T1 - Magnetically Switchable Adhesion and Friction of Soft Magnetoactive Elastomers JF - Advanced Engineering Materials N2 - Herein, the effect of an applied moderate (~240 mT) magnetic field on the work of adhesion (WoA) of mechanically soft (the shear modulus ~10 kPa) magnetoactive elastomer (MAE) samples with two different mass fractions (70 and 80 wt%) of carbonyl iron powder (CIP) is concerned. The unfilled elastomer sample is used for comparison. Due to some sedimentation of filling particles, the concentration of inclusions in thin (~10 μm) subsurface layers is different. It is shown that the WoA increases (up to 1.8-fold) on the particle-enriched side (PES) in the magnetic field and its value is higher for higher filler concentration. On the particle-depleted side (PDS), WoA does not depend on particle concentration and on the magnetic field. Adhesion and friction are coupled in MAEs. No statistically significant difference in the friction coefficient, determined from the extended Amontons´ law, depending on sample side, CIP concentration, or presence of magnetic field is found. However, the PDS in the magnetic field demonstrates significantly higher critical shear stress compared to that for the PES or PDS in the absence of magnetic field. Correlations between different surface properties are discussed. Obtained results are useful for the development of magnetically controllable soft robots. Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-45283 N1 - Corresponding authors: Stanislav Gorb und Mikhail Shamonin VL - 24 IS - 10 SP - 1 EP - 8 PB - WILEY-VCH ER - TY - JOUR A1 - Hornberger, Helga A1 - Kissel, Hannah A1 - Striegl, Birgit A1 - Kronseder, Matthias A1 - Vollnhals, Florian A1 - Christiansen, Silke H. T1 - Bioactivity and corrosion behavior of magnesium barrier membranes JF - Materials and Corrosion N2 - In the current research, magnesium and its alloys have been intensively studied as resorbable implant materials. Magnesium materials combine their good mechanical properties with bioactivity, which make them interesting for guided bone regeneration and for the application as barrier membranes. In this study, the in vitro degradation behavior of thin magnesium films was investigated in cell medium and simulated body fluid. Three methods were applied to evaluate corrosion rates: measurements of (i) the gaseous volume evolved during immersion, (ii) volume change after immersion, and (iii) polarization curves. In this comparison, measurements of H2 development in Dulbecco's modified Eagle's medium showed to be the most appropriate method, exhibiting a corrosion rate of 0.5 mm·year−1. Observed oxide and carbon contamination have a high impact on controlled degradation, suggesting that surface treatment of thin foils is necessary. The bioactivity test showed positive results; more detailed tests in this area are of interest. Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-24499 N1 - Corresponding author: Helga Hornberger VL - 73 IS - 1 SP - 8 EP - 19 PB - Wiley ER - TY - JOUR A1 - Melzner, Maximilian A1 - Pfeiffer, Christian A1 - Suess, Franz A1 - Dendorfer, Sebastian T1 - Musculoskeletal simulation of elbow stability for common injury patterns JF - Journal of Orthopaedic Research N2 - Elbow stability is derived from a combination of muscular, ligamentous, and bony structures. After an elbow trauma the stability of the joint is an important decision criterion for the subsequent treatment. The decision regarding non-operative/operative care depends mostly on subjective assessments of medical experts. Therefore, the aim of this study is to use musculoskeletal simulations as an objective assessment tool to investigate the extent to which failure of different stabilizers affects the elbow stability and how these observations correspond to the assessment from clinical practice. A musculoskeletal elbow simulation model was developed for this aim. To investigate the stability of the elbow, varus/valgus moments were applied under 0°, 45°and 90° flexion while the respective cubital angle was analyzed. This was performed for nine different injury scenarios, which were also evaluated for stability by clinical experts. With the results, it can be determined by which injury pattern and under which flexion angle the elbow stability is impaired regarding varus/valgus moments. The scenario with a complete failure of the medial and lateral ligaments and a fracture of the radial head was identified as having the greatest instability. The study presented a numerical determination of elbow stability against varus/valgus moments regarding clinical injury patterns, as well as a comparison of the numerical outcome with experience gained in clinical practice. The numerical predictions agree well with the assessments of the clinical specialists. Thus, the results from musculoskeletal simulation can make an important contribution to a more objective assessment of the elbow stability. KW - AnyBody KW - musculoskeletal simulation KW - elbow stability Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-54819 SN - 1554-527X N1 - Corresponding author: Maximilian Melzner VL - 41 IS - 6 SP - 1356 EP - 1364 PB - Wiley ER - TY - JOUR A1 - Sterner, Michael A1 - Bauer, Franz T1 - Power-to-X im Kontext der Energiewende und des Klimaschutzes in Deutschland JF - Chemie-Ingenieur-Technik N2 - Um den Einfluss verschiedener Power-to-X-Verfahren auf die Transformation des deutschen Energiesystems und das Erreichen der Klimaschutzziele zu überprüfen, wurde ein sektorübergreifendes Energiesystemmodel entwickelt. Die daraus gewonnenen Ergebnisse zeigen: Für eine erfolgreiche Energiewende ist der Einsatz von Power-to-X in Zukunft unverzichtbar. Vor allem in Bereichen und Sektoren, in denen hohe Energiedichten erforderlich und nur wenig andere Optionen zur Defossilisierung vorhanden sind, werden Power-to-X-Technologien zwingend notwendig. T2 - Power-to-X in Context of Energy Transition and Climate Change Mitigation in Germany KW - Power-to-Gas KW - Climate mitigation KW - Energy system KW - Modeling KW - Power-to-X KW - Klimaschutz KW - Energiewende Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-11669 SN - 0009-286X N1 - Corresponding author: Franz Bauer VL - 92 IS - 1-2 SP - 85 EP - 90 PB - Wiley ER - TY - JOUR A1 - Kravanja, Gaia A1 - Belyaeva, Inna A. A1 - Hribar, Luka A1 - Drevenšek-Olenik, Irena A1 - Jezeršek, Matija A1 - Shamonin (Chamonine), Mikhail T1 - Tunable Drop Splashing on Magnetoactive Elastomers JF - Advanced Materials Interfaces N2 - The significant effect of an external dc magnetic field on the splashing behavior of ethanol drops impacting on the unstructured (flat) surface of soft magnetoactive elastomers (MAEs) is reported. The Weber number corresponding to the transition between the deposition and the splashing regime is reduced by ≈20% in a moderate magnetic field of ≈300 mT. Alongside this effect, a two-fold increase of the initial deceleration of the ejection sheet is observed for the softest sample. The main underlying mechanism for the observed phenomena is believed to be the magnetic-field-induced stiffening of the MAEs. Further possible mechanisms are magnetically induced changes in the surface roughness and magnetic-field-induced plasticity (magnetic shape memory effect). The potential application areas are magnetically regulable wetting and magneto-responsive surfaces for controlling the drop splashing. Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-24504 N1 - Corresponding author: Mikhail Shamonin VL - 8 IS - 11 SP - 1 EP - 7 PB - Wiley ER - TY - JOUR A1 - Prem, Nina A1 - Sindersberger, Dirk A1 - Striegl, Birgit A1 - Böhm, Valter A1 - Monkman, Gareth J. T1 - Shape memory effects using magnetoactive Boron-organo-silicon oxide polymers JF - Macromolecular Chemistry and Physics N2 - Thermomechanical shape memory materials have certain disadvantages when it comes to 3D volumetric reproduction intended for rapid prototyping or robotic prehension. The need to constantly supply energy to counteract elastic retraction forces in order to maintain the required geometry, together with the inability to achieve conformal stability at elevated temperatures, limits the application of thermal shape memory polymers. Form removal also presents problems as most viscoelastic materials do not ensure demolding stability. This work demonstrates how magnetoactive boron−organo−silicon oxide polymers under the influence of an applied magnetic field can be used to achieve energy free sustainable volumetric shape memory effects over extended periods. The rheopectic properties of boron−organo−silicon oxide materials sustain form removal without mold distortion. Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-23205 N1 - Corresponding Author: Gareth J. Monkman VL - 221 IS - 15 SP - 1 EP - 8 PB - Wiley ER - TY - JOUR A1 - Monkman, Gareth J. A1 - Striegl, Birgit A1 - Prem, Nina A1 - Sindersberger, Dirk T1 - Electrical Properties of Magnetoactive Boron‐Organo‐Silicon Oxide Polymers JF - Macromolecular Chemistry and Physics N2 - The electrical properties of rheopectic magnetoactive composites comprising boron-organo-silicon oxide dielectric matrices containing carbonyl iron microparticles are presented for the first time. The increase in interfacial magnetocapacitance is seen to greatly exceed that experienced when using conventional elastomeric matrices such as polydimethylsiloxane. In addition to the increase in capacitance, a simultaneous and sharp decrease in the parallel electrical resistance over several orders of magnitude is also observed. The effects are time dependent but repeatable. Potential applications include magnetically controlled frequency dependent devices, magnetic sensor systems, weighting elements for neural networks, etc. Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-26488 N1 - Corresponding author: Gareth J. Monkman VL - 221 IS - 4 SP - 1 EP - 8 PB - Wiley ER - TY - JOUR A1 - Prem, Nina A1 - Sindersberger, Dirk A1 - Monkman, Gareth J. T1 - Infrared spectral analysis of low concentration magnetoactive polymers JF - Journal of Applied Polymer Science N2 - This work concerns an area of magnetoactive polymer (MAP) research seldom considered. Traditionally only MAP with high concentrations of magnetic filler (typically between 10 and 90 wt%) have been investigated. This article deals with a hitherto neglected aspect of research, namely MAP containing lower magnetic filler concentrations (1 to 3 wt%). This article utilizes a range of spectroscopic analysis methods (Raman and FTIR) and their applicability to MAP characterization at wavelengths ranging from 2.5 to 25 mu m. Particular attention is paid to low carbonyl iron particle (CIP) concentrations in MAP for which the emergence of capillary doublets at a critical 2 wt% concentration is revealed. This results in measurable magnetic field-dependent changes in IR absorption at a wavelength of 4.255 mu m together with a detectable CO2 susceptibility. (c) 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 48366. KW - ELASTOMERS KW - magnetism and magnetic properties KW - sensors and actuators KW - spectroscopy Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-25913 SN - 1097-4628 N1 - Corresponding author: Nina Prem VL - 137 IS - 7 SP - 1 EP - 7 PB - Wiley ER - TY - JOUR A1 - Grabinger, Lisa A1 - Hauser, Florian A1 - Mottok, Jürgen T1 - On the perception of graph layouts JF - Journal of Software: Evolution and Process N2 - In the field of software engineering, graph-based models are used for a variety of applications. Usually, the layout of those graphs is determined at the discretion of the user. This article empirically investigates whether different layouts affect the comprehensibility or popularity of a graph and whether one can predict the perception of certain aspects in the graph using basic graphical laws from psychology (i.e., Gestalt principles). Data on three distinct layouts of one causal graph is collected from 29 subjects using eye tracking and a print questionnaire. The evaluation of the collected data suggests that the layout of a graph does matter and that the Gestalt principles are a valuable tool for assessing partial aspects of a layout. KW - causal graphs KW - eye tracking KW - gestalt principles KW - graph layouts KW - modeling languages Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-62973 N1 - Corresponding author: Lisa Grabinger PB - Wiley ER - TY - JOUR A1 - Thumann, Philipp A1 - Buchner, Stefan A1 - Marburg, Steffen A1 - Wagner, Marcus T1 - A comparative study of Glinka and Neuber approaches for fatigue strength assessment on 42CrMoS4-QT specimens JF - Strain N2 - In fatigue strength assessment, the methods based on ideal elastic stresses according to Basquin and the less established method based on elastic-plastic stress quantities according to Manson, Coffin and Morrow are applied. The former calculates loads using linear-elastic stresses, the latter requires elasticplastic evaluation parameters, such as stresses and strains. These can be determined by finite element analysis (FEA) with a linear-elastic constitutive law, and subsequent conversion to elastic-plastic loads, using the macro support formula by Neuber. In this contribution, an alternative approach to approximate elastic-plastic parameters proposed by Glinka is compared to the the strain-life method using Neuber's formula, as well as the stress-life method of Basquin. Several component tests on 42CrMoS4-QT specimens are investigated. To determine the input data for the fatigue strength evaluations, the entire test setup is computed by FEA. The nodal displacements from these validated full-model simulations are used as boundary conditions for a submodel simulation of a notch, whose results serve as input for the fatigue strength assessments. It is shown that all approaches provide a reliable assessment of components. Our key result is that the strain-life method using the concept by Glinka for notch stress computation, yields improved results in fatigue strength assessments. KW - 42CrMoS4-QT KW - fatigue strength KW - stress-life method KW - Glinka KW - strain-life method Y1 - 2023 U6 - https://doi.org/10.1111/str.12470 SN - 1475-1305 N1 - Corresponding author: Marcus Wagner VL - 2023 IS - e12470 PB - Wiley ER -