TY - JOUR A1 - Prem, Nina A1 - Sindersberger, Dirk A1 - Striegl, Birgit A1 - Böhm, Valter A1 - Monkman, Gareth J. T1 - Shape memory effects using magnetoactive Boron-organo-silicon oxide polymers JF - Macromolecular Chemistry and Physics N2 - Thermomechanical shape memory materials have certain disadvantages when it comes to 3D volumetric reproduction intended for rapid prototyping or robotic prehension. The need to constantly supply energy to counteract elastic retraction forces in order to maintain the required geometry, together with the inability to achieve conformal stability at elevated temperatures, limits the application of thermal shape memory polymers. Form removal also presents problems as most viscoelastic materials do not ensure demolding stability. This work demonstrates how magnetoactive boron−organo−silicon oxide polymers under the influence of an applied magnetic field can be used to achieve energy free sustainable volumetric shape memory effects over extended periods. The rheopectic properties of boron−organo−silicon oxide materials sustain form removal without mold distortion. Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-23205 N1 - Corresponding Author: Gareth J. Monkman VL - 221 IS - 15 SP - 1 EP - 8 PB - Wiley ER - TY - JOUR A1 - Pangerl, Jonas A1 - Sukul, Pritam A1 - Rück, Thomas A1 - Fuchs, Patricia A1 - Weigl, Stefan A1 - Miekisch, Wolfram A1 - Bierl, Rudolf A1 - Matysik, Frank-Michael T1 - An inexpensive UV-LED photoacoustic based real-time sensor-system detecting exhaled trace-acetone JF - Photoacoustics N2 - n this research we present a low-cost system for breath acetone analysis based on UV-LED photoacoustic spectroscopy. We considered the end-tidal phase of exhalation, which represents the systemic concentrations of volatile organic compounds (VOCs) – providing clinically relevant information about the human health. This is achieved via the development of a CO2-triggered breath sampling system, which collected alveolar breath over several minutes in sterile and inert containers. A real-time mass spectrometer is coupled to serve as a reference device for calibration measurements and subsequent breath analysis. The new sensor system provided a 3σ detection limit of 8.3 ppbV and an NNEA of 1.4E-9 Wcm 1Hz 0.5. In terms of the performed breath analysis measurements, 12 out of 13 fell within the error margin of the photoacoustic measurement system, demonstrating the reliability of the measurements in the field. KW - Photoacoustic spectroscopy KW - Real-time mass-spectrometry KW - Breath analysis KW - Acetone KW - UV-LED Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-71279 SN - 2213-5979 N1 - Corresponding author der OTH Regensburg: Jonas Pangerl VL - 38 PB - Elsevier ER - TY - JOUR A1 - Maier, Robert A1 - Schlattl, Andreas A1 - Guess, Thomas A1 - Mottok, Jürgen T1 - CausalOps - Towards an industrial lifecycle for causal probabilistic graphical models JF - Information and Software Technology N2 - Context: Causal probabilistic graph-based models have gained widespread utility, enabling the modeling of cause-and-effect relationships across diverse domains. With their rising adoption in new areas, such as safety analysis of complex systems, software engineering, and machine learning, the need for an integrated lifecycle framework akin to DevOps and MLOps has emerged. Currently, such a reference for organizations interested in employing causal engineering is missing. This lack of guidance hinders the incorporation and maturation of causal methods in the context of real-life applications. Objective: This work contextualizes causal model usage across different stages and stakeholders and outlines a holistic view of creating and maintaining them within the process landscape of an organization. Method: A novel lifecycle framework for causal model development and application called CausalOps is proposed. By defining key entities, dependencies, and intermediate artifacts generated during causal engineering, a consistent vocabulary and workflow model to guide organizations in adopting causal methods are established. Results: Based on the early adoption of the discussed methodology to a real-life problem within the automotive domain, an experience report underlining the practicability and challenges of the proposed approach is discussed. Conclusion: It is concluded that besides current technical advancements in various aspects of causal engineering, an overarching lifecycle framework that integrates these methods into organizational practices is missing. Although diverse skills from adjacent disciplines are widely available, guidance on how to transfer these assets into causality-driven practices still need to be addressed in the published literature. CausalOps’ aim is to set a baseline for the adoption of causal methods in practical applications within interested organizations and the causality community. KW - Causal engineering KW - Model lifecycle KW - MLOps KW - Causal graphical models Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-73350 SN - 0950-5849 N1 - Corresponding author der OTH Regensburg: Robert Maier PB - Elsevier ER - TY - JOUR A1 - Haug, Sonja A1 - Altenbuchner, Amelie A1 - Weber, Karsten T1 - Elektronische Patientenakte und Freigabe von Gesundheitsdaten BT - Die Einstellung von Personen in Haushalten mit Kindern,The Attitude of Persons in Households with Children JF - Pädiatrie & Pädologie N2 - Hintergrund In Deutschland wird die elektronische Patientenakte (ePA) eingeführt. Fragestellung Untersucht werden Nutzungsbereitschaft der ePA, Einstellung zu Gesundheitsdaten und Datenübermittlung bei Personen mit und ohne Kinder. Methoden Telefonbefragung bei einer Zufallsstichprobe der Bevölkerung in Deutschland (2022, n = 1308). Ergebnisse Die ePA ist bei Haushalten mit Kindern mehrheitlich unbekannt. Ihre Nutzungsbereitschaft der ePA und die Zustimmung zur Speicherung von Gesundheitsdaten ist geringer, aber sie sind häufiger als Haushalte ohne Kinder bereit zur Freigabe ihrer Gesundheitsdaten für die Forschung. Schlussfolgerung Es besteht Aufklärungsbedarf über die Speicherung von Gesundheitsdaten. Gewünscht wird zunehmend eine digitale Arzt-Patienten-Kommunikation. KW - Gesundheitsregister KW - Elektronische Patientenakte KW - Forschungsdaten KW - Kommunikation im Gesundheitswesen KW - Versorgungsmanagement Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-73847 SN - 0030-9338 N1 - Corresponding author der OTH REgensburg: Sonja Haug PB - Springer ER - TY - JOUR A1 - Bauer, Franz A1 - Sterner, Michael T1 - Impacts of lifestyle changes on energy demand and greenhouse gas emissions in Germany JF - Renewable and Sustainable Energy Reviews N2 - Most energy scenario studies typically focus on technological options and fuel substitution for decarbonising future energy systems. Lifestyle changes are rarely considered, although they can significantly reduce energy demand and climate change mitigation efforts. By using an energy system model, this study shows that it is possible to reduce final energy demand in Germany by 61 % in 2050 relative to 2019 levels, resulting in an annual per capita energy demand of 44 GJ for a representative country of the Global North. This goal can be achieved through a combination of technological measures and lifestyle changes without sacrificing a decent standard of living. Societal chances can eliminate reliance on not-yet-established negative emission technologies, reduce energy dependency, and reduce the need for energy-intensive hydrogen and e-fuels. Downsizing the energy system provides an opportunity for strengthening climate change mitigation, decrease material demand and reduce land use. KW - Climate change mitigation KW - Energy system modelling KW - Sufficiency KW - Lifestyle changes KW - Climate neutrality KW - Low energy demand KW - German climate targets Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-77682 SN - 1364-0321 N1 - Corresponding author der OTH Regensburg: Franz Bauer VL - 207 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Albrecht, Sophie Viktoria A1 - Hellerbrand, Stefan A1 - Weininger, Florian A1 - Thiel, Charlotte T1 - Strategies for Minimizing Environmental Impact in Construction: A Case Study of a Cementitious 3D Printed Lost Formwork for a Staircase JF - materials N2 - The construction industry faces significant challenges, including environmental sustainability, rising material costs, and a shortage of skilled labor. Digital fabrication technologies offer innovative solutions to address these issues by reducing raw material consumption and waste generation. Among these, 3D printing technologies offer distinct advantages over traditional construction methods, particularly in handling complex geometries. However, the significant environmental impact of cement in 3D printed concrete, due to its high rheological and printability requirements, remains a concern. This study introduces a novel application of 3D printed permanent formwork in the construction of a winder staircase, assessed through an Environmental Life Cycle Assessment (LCA) from cradle to gate. By comparing the environmental impacts of various construction materials and processes, this study highlights the comparative advantages and disadvantages of conventional methods versus 3D printing. The LCA results reveal that traditional production methods, particularly those using plywood formwork, exhibit higher environmental impacts. In contrast, timber formwork performs better than most 3D printed mixtures in terms of Global Warming Potential (GWP), Acidification Potential (AP), and abiotic depletion potential (ADP). The findings of this study underscore the potential of additive manufacturing for sustainable construction, particularly through the use of low-clinker cement in 3D printed formwork, offering a promising pathway towards reducing the environmental footprint of construction activities KW - permanent formwork KW - selective cement activation (SCA) KW - 3D concrete printing (3DCP) KW - life cycle assessment (LCA) KW - additive manufacturing in construction (AMC) Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-79236 N1 - Corresponding author der OTHR: Sophie Viktoria Albrecht VL - 18 PB - MDPI ER - TY - JOUR A1 - Escher, Lukas A1 - Rück, Thomas A1 - Jobst, Simon A1 - Pangerl, Jonas A1 - Bierl, Rudolf A1 - Matysik, Frank-Michael T1 - Photodissociation-Driven Photoacoustic Spectroscopy with UV-LEDs for Ozone Detection JF - Photoacoustics N2 - This study presents the development and evaluation of a UV-LED based photoacoustic (PA) measurement system for ozone (O3) detection to demonstrate its potential for low-cost and accurate sensing while for the first time addressing the importance of photodissociation for PA signal generation for O3 in the UV range. With a detection limit of 7.9 ppbV, the system exhibits a significant advancement over state-of-the-art UV-PA O3 detection and is on par with laser-based setups. Following a novel discussion of the PA signal arising from photodissociation and its products, cross-sensitivity effects due to environmental factors such as temperature and gas composition were systematically analyzed. A digital twin driven compensation for these influences was implemented and evaluated. Despite the challenges associated with modeling the effects of H2O and CO2, the PA system shows considerable potential, though further studies in real world applications must be conducted. KW - Photoacoustic spectroscopy KW - UV-LED KW - Ozone KW - Photodissociation KW - Cross-sensitivity Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-80076 SN - 2213-5979 N1 - Corresponding author der OTH Regensburg: Lukas Escher VL - 43 PB - Elsevier BV ER - TY - JOUR A1 - Westner, Markus A1 - Reicheneder, Matthias A1 - Matschi, Markus T1 - From Captive Centers to Global Integration BT - Organizational Models and Good Practices in Information Technology Nearshoring and Offshoring JF - Information Resources Management Journal N2 - Contemporary developments in virtual work and global talent management are transforming information technology (IT) nearshoring and offshoring practices, yet research on organizational responses remains limited. Through expert interviews with 33 IT executives (76% chief information officers) from Germany's top 500 companies, this article examines organizational models, strategies, and good practices in IT nearshoring and offshoring. It reveals a shift from traditional captive centers toward fully integrated global teams, enabling high-value task delivery and reflecting increased workforce maturity. Companies are expanding their operations driven by talent needs rather than cost savings, with success factors including employee integration and robust on-site management. This study contributes to theory and practice by providing a framework for understanding organizational models in global IT delivery and offering actionable insights for executives, emphasizing workforce integration over geographical separation. KW - Offshoring KW - Informationstechnik KW - Internationale Arbeitsteilung KW - Organisationsstruktur KW - IT-Nearshoring KW - IT-Offshoring KW - Global IT-Teams KW - Organizational Models KW - Distributed Work Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-80406 SN - 1533-7979 N1 - Corresponding author der OTH Regensburg: Markus Westner VL - 38 IS - 1 PB - IGI Global ER - TY - JOUR A1 - Hausler, Peter A1 - Holzner, Lukas A1 - Ehrnsperger, Matthias A1 - Bierl, Rudolf T1 - Evaluation of the creep strength of samples produced by fused deposition modeling JF - Open Engineering N2 - Data sheets for 3D printing materials typically include softening temperature, impact strength, tensile strength, and stiffness. However, creep strength, an important parameter for components used over an extended period, is usually not included. Nevertheless, this parameter is of significant importance for components that are used over an extended period of time.This study compares the long-term creep behavior of a selection of materials that are commonly used in fused deposition modeling 3D printing. The materials under investigation are acrylonitrile butadiene styrene, acrylonitrile styrene acrylate, polylactic acid, and polycarbonate. In addition, the influence of fiber reinforcements on these materials is also examined. A simple, reproducible test procedure is proposed for users to determine and compare creep resistance of materials. This enables developers to select materials suitable for their own requirements on creep resistance and allows 3D-printing users to compare different materials. Results suggest that fiber reinforcement generally improves creep stability in 3D-printing materials, with GreenTEC Pro Carbon and add:north PC Blend HT LCF showing the most promise in this study. Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-79760 N1 - Corresponding author der OTH Regensburg: Peter Hausler VL - 14 IS - 1 PB - de Gruyter ER - TY - JOUR A1 - Kastenmeier, Andreas A1 - Siegl, Marco A1 - Ehrlich, Ingo A1 - Gebbeken, Norbert T1 - Review of elasto-static models for three-dimensional analysis of thick-walled anisotropic tubes JF - Journal of Composite Materials N2 - Most shell or beam models of anisotropic tubes under bending have no validity for thick-walled structures. As a result, the need to develop three-dimensional formulations which allow a change in the stress, strain and displacement distributions across the radial component arises. Basic formulations on three-dimensional anisotropic elasticity were made either stressor displacement-based by Lekhnitskii or Stroh on plates. Lekhnitskii also was the first to expand these analytical formulations to tubes under various loading conditions. This paper presents a review of the stress and strain analysis of tube models using three-dimensional anisotropic elasticity. The focus lies on layered structures, like fiber-reinforced plastics, under various bending loads, although the basic formulations and models regarding axisymmetric loads are briefly discussed. One section is also dedicated to the determination of an equivalent bending stiffness of tubes. KW - composite tube bending KW - layered structrues KW - anisotropy KW - Analytical modelling KW - elasticity Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-67521 N1 - Corresponding author: Andreas Kastenmeier PB - Sage ER - TY - JOUR A1 - Haug, Sonja A1 - Schnell, Rainer A1 - Raptis, Georgios A1 - Dotter, Caroline A1 - Weber, Karsten T1 - Wissen und Einstellung zur Speicherung und Nutzung von Gesundheitsdaten: Ergebnisse einer Bevölkerungsbefragung JF - Zeitschrift für Evidenz, Fortbildung und Qualität im Gesundheitswesen N2 - Hintergrund/Zielsetzung Der Beitrag befasst sich mit dem Wissenstand und der Einstellung der Bevölkerung. Betrachtet werden die Übermittlung und Verfügbarkeit von Gesundheitsdaten, Gesundheitsregister, die elektronische Patientenakte, Einwilligungsverfahren für die Übermittlung von Daten und der Zugriff auf Gesundheitsdaten zu Forschungszwecken. Methoden Die Studie basiert auf einer computergestützten Telefonbefragung (Dual-Frame) bei einer Zufallsstichprobe der Bevölkerung in Deutschland im Zeitraum 01.-27.06.2022 (n = 1.308). Ergebnisse Der Wissensstand zur Übermittlung von Gesundheitsdaten an Krankenkassen ist hoch, wohingegen das Vorhandensein zentraler Sterbe-, Impf- und Gesundheitsregister sowie der Zugriff auf Gesundheitsdaten durch behandelnde Ärztinnen und Ärzte überschätzt werden. Die Akzeptanz medizinischer Register ist sehr hoch. Die elektronische Patientenakte ist bei der Hälfte der Bevölkerung unbekannt, die Nutzungsbereitschaft ist eher gering ausgeprägt; bei der Übertragung von Daten wird eine Zustimmungsoption bevorzugt, und über achtzig Prozent würden die Daten der elektronischen Patientenakte zur Forschung freigeben. Drei Viertel würden ihre Gesundheitsdaten allgemein zur Forschung freigeben, insbesondere an Universitäten in Deutschland, wobei meist Anonymität Bedingung ist. Die Bereitschaft zur Datenfreigabe steigt mit der Höhe des Vertrauens in die Presse sowie in Universitäten und Hochschulen, und sie sinkt, wenn ein Datenleck als schwerwiegend erachtet wird. Diskussion und Schlussfolgerung In Deutschland besteht, wie in anderen europäischen Ländern, eine große Bereitschaft zur Freigabe von Gesundheitsdaten zu Forschungszwecken. Dagegen ist der Wunsch zur Nutzung der elektronischen Patientenakte eher gering. Ebenso niedrig ist die Akzeptanz einer Widerspruchsoption, die jedoch als Voraussetzung für eine erfolgreiche Einführung einer elektronischen Patientenakte gilt. Vertrauen in die Forschung und staatliche Stellen, die Gesundheitsdaten verarbeiten, sind zentrale Faktoren. T2 - Knowledge and attitudes towards sharing of health data: Results of a population survey Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-67461 SN - 1865-9217 N1 - Corresponding author: Sonja Haug N1 - Fragebogen u.d.T.: "Projekt: Privacy und Willingness to share von Gesundheitsdaten (PWG)"; auf dem Publikationsserver unter https://opus4.kobv.de/opus4-oth-regensburg/frontdoor/index/index/docId/6057 abgelegt. N1 - Preprint unter: https://opus4.kobv.de/opus4-oth-regensburg/frontdoor/index/index/docId/6144 SP - 50 EP - 58 PB - Elsevier ER - TY - JOUR A1 - Scharf, Anna A1 - Haug, Sonja A1 - Ritthaler, Markus A1 - Raptis, Georgios T1 - Chancen und Herausforderungen der Digitalisierung bei der Rehabilitation – Ergebnisse einer Befragung von Rehabilitationseinrichtungen JF - Die Rehabilitation: Zeitschrift für Praxis und Forschung in der Rehabilitation N2 - Ziel der Studie: Ziel der Studie ist die Messung des Stands der Digitalisierung und die mit einer Anbindung an die Telematikinfrastruktur verbundenen Chancen und Herausforderungen für Rehabilitationseinrichtungen. Methodik: Teilstandardisierte Online-Befragung bei Trägern von Rehabilitationseinrichtungen in Bayern (n=33). Der Fragebogen mit 36 Fragen beinhaltet eine leicht veränderte Skala auf Basis des „Electronic Medical Record Adoption Model (EMRAM)“. Ergebnisse: Der Digitalisierungsgrad wurde in 70 Prozent der Rehabilitationseinrichtungen mit Stufe 0 angegeben (Stufenmodell bis 7). Die Übermittlung patientenbezogener Daten (Eingang und Ausgang) erfolgt häufig analog, wohingegen die Verarbeitung innerhalb der Einrichtung in vielen Fällen bereits überwiegend digital ist. Beim Anschluss an die Telematikinfrastruktur wird hoher Aufwand bei der Installation, aber auch der Schulung des Personals und der Anpassung der Arbeitsorganisation gesehen. Schlussfolgerung: Durch Änderung der gesetzlich-finanziellen Lage in Deutschland eröffnen sich für Rehabilitationseinrichtungen neue Möglichkeiten einer verstärkten Digitalisierung. Hürden hängen mit Anforderungen an IT-Sicherheit, Schulung des Personals und sowie dem ebenfalls geringen Digitalisierungsstand bei Krankenhäusern und Ärzt*innen sowie Patient*innen zusammen, die eine digitale Datenübermittlung erschweren. T2 - Opportunities and Challenges of Digitalization in Rehabilitation: Results of a Survey of Rehabilitation Facilities KW - Patientenbezogene Daten KW - Digitalisierungsgrad KW - Telematikinfrastruktur KW - IT-Management Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-64726 N1 - Corresponding author: Sonja Haug VL - 62 IS - 5 SP - 299 EP - 307 PB - Thieme CY - Stuttgart ER - TY - JOUR A1 - Richter, Stefanie T1 - Erleben von Zukunftsunsicherheit, Armutsrisiken und prekären Lebenslagen im Pflegeheim JF - Zeitschrift für Gerontologie und Geriatrie N2 - Die Situation von Menschen im Pflegeheim, die besonders dem Risiko der „pflegebedingten Verarmung“ ausgesetzt sind, ist in der Forschung wenig präsent. Der Beitrag befasst sich mit dem Erleben von Unsicherheiten, Armut und prekären Lebenslagen älterer Menschen im Heim. Grundlage liefern Daten einer ethnographischen Studie zum Älterwerden und zum Leben mit chronischen Erkrankungen. Anhand von Fällen wird ein Spektrum prekärer Lebenslagen skizziert. Deutlich wird u. a.: Menschen mit diversen soziobiografischen Hintergründen können im Zuge von Hilfebedürftigkeit und Heimübergängen von Unsicherheiten, Armut und prekären Lebenslagen betroffen sein. Nicht zu wissen, ob das verfügbare Geld genügt, um Kostensteigerungen bis zum Lebensende zu decken, kennzeichnet eine häufig erlebte Zukunftsunsicherheit; drohende Armut bzw. die Abhängigkeit von Sozialhilfe können pflege- und institutionell bedingte Verlusterfahrungen von Autonomie, Teilhabe und Lebensgestaltung verschärfen und den Gesamtzustand weiter destabilisieren. Das Erleiden bleibt weitgehend unsichtbar; strukturelle Probleme werden individualisiert. N2 - The living situation of people in nursing homes, with a specific vulnerability to care-related impoverishment, is underresearched. This article deals with experiences of uncertainty, poverty and a precarious life situation of care home residents in later life. The data basis is supplied by an ethnographic study of ageing and living with chronic health conditions. A range of precarious living situations are outlined on the basis of real cases. Insights gleaned include: people with diverse sociobiographical backgrounds can be affected by insecurity, poverty and precarious life situations as a result of becoming dependent on help and the transition to care homes. Not knowing whether available funds will suffice to cover rising costs until the end of life is a common form of uncertainty about the future. The threat of poverty or becoming dependent on state benefits can exacerbate experiences of loss associated with institutional care, losing autonomy, opportunities for participation, and options for shaping oneʼs life and can further destabilize the overall condition. This anguish remains largely invisible; structural problems are individualized. KW - Altern KW - Hilfsbedürftigkeit KW - Heimübergang KW - Armut KW - Autonomie KW - aging KW - need of care KW - home transition KW - poverty KW - autonomy Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-64350 N1 - Corresponding author: Stefanie Richter SP - 1 EP - 6 PB - Springer ET - Online first ER - TY - JOUR A1 - Görtler, Michael T1 - Bildung und Zeit im Kontext der Sozialen Arbeit : Theoretische Überlegungen zur Bedeutung von Zeit für Bildungsprozesse im Kontext der Sozialen Arbeit JF - Sozial Extra N2 - Die Bedeutung von Zeit für Bildungsprozesse im Kontext der Sozialen Arbeit ist bisher wenig erforscht. Um sich dieser Fragestellung anzunähern, werden in diesem Beitrag theoretische Überlegungen im Anschluss an Diskurse zu Bildung und Zeit in der Pädagogik angestellt. Dabei wird Zeit als ermöglichender, ökonomischer und politischer Faktor diskutiert, um die Perspektive der Sozialen Arbeit auf Bildungsprozesse zu erweitern. T2 - Education and Time in the Context of Social Work : Theoretical Considerations about the Importance of Time for Educational Processes KW - Bildung und Zeit im Kontext der Sozialen Arbeit KW - Zeit als ermöglichender, ökonomischer und politischer Faktor in Bildungsprozessen KW - Education and time in the context of social work KW - Time as an enabling, economic and political factor in educational processes Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-60988 N1 - Corresponding author: Michael Görtler VL - 47 IS - 1 SP - 46 EP - 49 PB - Springer ER - TY - JOUR A1 - Pongratz, Christian A1 - Tix, Janek A1 - Wolfrum, Johannes A1 - Gerke, Steffen A1 - Ehrlich, Ingo A1 - Brünig, Michael T1 - Test Setup for Investigating the Impact Behavior of Biaxially Prestressed Composite Laminates JF - Experimental Techniques N2 - Instrumented impact testing and compression-after-impact testing are important to adequately qualify material behavior and safely design composite structures. However, the stresses to which fiber-reinforced plastic components are typically subjected in practice are not considered in the impact test methods recommended in guidelines or standards. In this paper, a test setup for investigating the impact behavior of composite specimens under plane uniaxial and biaxial preloading is presented. For this purpose, a special test setup consisting of a biaxial testing machine and a specially designed drop-weight tower was developed. The design decisions were derived from existing guidelines and standards with the aim of inducing barely visible impact damage in laminated carbon fiber-reinforced plastic specimens. Several measurement systems have been integrated into the setup to allow comprehensive observation of the impact event and specimen behavior. A feasibility test was performed with biaxially prestressed carbon fiber-reinforced plastic specimens in comparison with unstressed reference tests. The compressive-tensile prestressing resulted in lower maximum contact forces, higher maximum deflections, higher residual deflections and a different damage pattern, which was investigated by light microscopic analysis. Finally, the functionality of the experimental setup is discussed, and the results seem to indicate that the test setup and parameters were properly chosen to investigate the effect of prestresses on the impacts behavior of composite structures, in particular for barely visible subsequent damages. KW - Mechanical Engineering KW - Mechanics of Materials KW - Faserverbundwerkstoff KW - Schlagprüfung Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-70355 SN - 0732-8818 N1 - Corresponding authors: Christian Pongratz und Ingo Ehrlich PB - Springer Nature ER - TY - JOUR A1 - Grad, Marius A1 - Zentgraf, Jan A1 - Schultheiss, Ulrich A1 - Esper, Lukas A1 - Diemar, Andreas A1 - Noster, Ulf A1 - Spiess, Lothar T1 - Effect of Carbon Content on the Phase Composition, Microstructure and Mechanical Properties of the TiC Layer Formed in Hot-Pressed Titanium-Steel Composites JF - Metals N2 - During the hot pressing of pure titanium and different carbon steels in a temperature range of ϑ = 950–1050 °C, a compound layer up to dL≈10 μm thick is formed at the titanium–steel interface. With a higher carbon content of the used steel, the layer thickness increases. The carbon concentration within the layer is in the range of stoichiometry for TiC. Apart from TiC, no other phases can be detected by X-ray diffraction (XRD) measurements inside the formed layer. The calculation of the activation energy for the TiC layer formation is Q = 126.5–136.7 kJ mol−1 and is independent of the carbon content of the steel. The resulting microstructure has a grain size gradient, wherein the mechanical properties, such as hardness and Young‘s modulus, are almost constant. Statistical analysis using Response Surface Methodology (RSM) indicates that the carbon content of the steel has the most significant influence on layer thickness, followed by annealing temperature and annealing time. By selecting the appropriate carbon steel and the subsequent removal of the steel, it is possible to produce targeted TiC layers on titanium substrates, which holds enormous potential for this material in wear-intensive applications. Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-74617 SN - 2075-4701 N1 - Cooresponding author der OTH Regensburg: Marius Grad VL - 14 IS - 9 PB - MDPI AG ER - TY - JOUR A1 - Auer, Simon A1 - Schiebl, Jonas A1 - Iversen, Kristoffer A1 - Subhash Chander, Divyaksh A1 - Damsgaard, Michael A1 - Dendorfer, Sebastian T1 - Biomechanical assessment of the design and efficiency of occupational exoskeletons with the AnyBody Modeling System JF - Zeitschrift für Arbeitswissenschaften N2 - Exoskeletons were invented over 100 years ago but have only become popular in the last two decades, especially in the working industry as they can decrease work-related loads significantly. The most often used exoskeletons are for the lower back and shoulder since these are commonly affected body regions. All devices have in common that their purpose is to reduce internal loads of vulnerable body regions. Nevertheless, there is still little understanding on how biomechanical loading in the human body changes when exoskeletons are used. Therefore, further analyses are needed. A promising candidate for these are musculoskeletal models, which are based on an inverse dynamics approach and can calculate external parameters such as ground reaction forces or other interaction forces as well as internal parameters such as joint reaction forces or muscle activities. The various examples in the literature show that these models are increasingly used for assessing the biomechanical effects of exoskeletons on the human body. Furthermore, musculoskeletal models can calculate biomechanical loadings of humans with and without exoskeletons for all kinds of applications and allow an evaluation of their purpose. Practical Relevance: This article highlights the possibilities of musculoskeletal models for assessing the design and efficiency of occupational exoskeletons. Several practical use cases are described along with distinct descriptions of common implications of musculoskeletal and exoskeleton modeling. KW - Biomechanics KW - Ergonomics KW - Motion capture KW - Inverse dynamics Y1 - 2022 U6 - https://doi.org/10.1007/s41449-022-00336-4 N1 - Corresponding author: Sebastian Dendorfer VL - 76 IS - 4 SP - 440 EP - 449 PB - Springer Nature ER - TY - JOUR A1 - Melzner, Maximilian A1 - Pfeiffer, Christian A1 - Suess, Franz A1 - Dendorfer, Sebastian T1 - Musculoskeletal simulation of elbow stability for common injury patterns JF - Journal of Orthopaedic Research N2 - Elbow stability is derived from a combination of muscular, ligamentous, and bony structures. After an elbow trauma the stability of the joint is an important decision criterion for the subsequent treatment. The decision regarding non-operative/operative care depends mostly on subjective assessments of medical experts. Therefore, the aim of this study is to use musculoskeletal simulations as an objective assessment tool to investigate the extent to which failure of different stabilizers affects the elbow stability and how these observations correspond to the assessment from clinical practice. A musculoskeletal elbow simulation model was developed for this aim. To investigate the stability of the elbow, varus/valgus moments were applied under 0°, 45°and 90° flexion while the respective cubital angle was analyzed. This was performed for nine different injury scenarios, which were also evaluated for stability by clinical experts. With the results, it can be determined by which injury pattern and under which flexion angle the elbow stability is impaired regarding varus/valgus moments. The scenario with a complete failure of the medial and lateral ligaments and a fracture of the radial head was identified as having the greatest instability. The study presented a numerical determination of elbow stability against varus/valgus moments regarding clinical injury patterns, as well as a comparison of the numerical outcome with experience gained in clinical practice. The numerical predictions agree well with the assessments of the clinical specialists. Thus, the results from musculoskeletal simulation can make an important contribution to a more objective assessment of the elbow stability. KW - AnyBody KW - musculoskeletal simulation KW - elbow stability Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-54819 SN - 1554-527X N1 - Corresponding author: Maximilian Melzner VL - 41 IS - 6 SP - 1356 EP - 1364 PB - Wiley ER - TY - JOUR A1 - Reinker, Lukas A1 - Bläsing, Dominic A1 - Bierl, Rudolf A1 - Ulbricht, Sabina A1 - Dendorfer, Sebastian T1 - Correlation of Acceleration Curves in Gravitational Direction for Different Body Segments during High-Impact Jumping Exercises JF - sensors N2 - Osteoporosis is a common disease of old age. However, in many cases, it can be very well prevented and counteracted with physical activity, especially high-impact exercises. Wearables have the potential to provide data that can help with continuous monitoring of patients during therapy phases or preventive exercise programs in everyday life. This study aimed to determine the accuracy and reliability of measured acceleration data at different body positions compared to accelerations at the pelvis during different jumping exercises. Accelerations at the hips have been investigated in previous studies with regard to osteoporosis prevention. Data were collected using an IMU-based motion capture system (Xsens) consisting of 17 sensors. Forty-nine subjects were included in this study. The analysis shows the correlation between impacts and the corresponding drop height, which are dependent on the respective exercise. Very high correlations (0.83–0.94) were found between accelerations at the pelvis and the other measured segments at the upper body. The foot sensors provided very weak correlations (0.20–0.27). Accelerations measured at the pelvis during jumping exercises can be tracked very well on the upper body and upper extremities, including locations where smart devices are typically worn, which gives possibilities for remote and continuous monitoring of programs. KW - osteoporosis KW - inertial measurement units KW - wearable motion-tracking sensors KW - high-impact exercisess Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-58217 N1 - Corresponding author: Lukas Reinker N1 - This work was supported by the Bavarian Academic Forum [BayWISS-Verbundkolleg Gesundheit] and the DHZK fond for behavioral cardiovascular diseases [Behaviorale kardiovaskuläre Erkrankungen; grand number: 81Z0400105]. VL - 23 IS - 4 PB - MDPI CY - Basel ER - TY - JOUR A1 - Auer, Simon A1 - Kubowitsch, Simone A1 - Dendorfer, Sebastian T1 - Kombinierter Einfluss von psychologischen und biomechanischen Faktoren auf die muskulären Belastungen beim Fußballspielen JF - Die Orthopädie N2 - When mental stress and musculoskeletal loading interact, the risk for injury increases due to altered body kinematics and increased muscle tension. These changes can be detected with musculoskeletal models, and mental loading and stress must be analyzed at emotional, cognitive, and behavioral levels. To investigate these kinematic and loading changes under stress, competitive athletes were subjected to mental stress during highly dynamic movements, and musculoskeletal models were used to analyze the biomechanical loading. It was shown that under mental stress, independent of the subjective perception, a strong change in muscle forces can occur. Accordingly, competitive athletes should undergo screenings to assess individual movement patterns and promote general stress resilience. N2 - Für Fußballer:innen stellen muskuläre Verletzungen der unteren Extremitäten ein großes Problem dar. Ein Beispiel hierfür liefert die Nationalmannschaftsstürmerin Alexandra Popp, die aufgrund muskulärer Probleme das EM-Finale 2022 in Wembley kurzfristig verpasste. Oftmals stehen gerade hohe Anspannungssituationen in zeitlichem Zusammenhang mit Verletzungen, der Einfluss der psychischen Beanspruchung auf die biomechanischen Belastungen wird jedoch meist nur wenig beachtet. KW - Biologische Modelle KW - Biomechanik KW - Leistungssportler KW - Bewegung KW - Resilienz, psychologische KW - Biological models KW - Biomechanics KW - Elite athletes KW - Movement KW - Resilience, psychological Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-65113 N1 - Corresponding author: Sebastian Dendorfer VL - 52 IS - 11 SP - 1 EP - 6 PB - Springer ER - TY - JOUR A1 - Köck, Hannah A1 - Striegl, Birgit A1 - Kraus, Annalena A1 - Zborilova, Magdalena A1 - Christiansen, Silke H. A1 - Schäfer, Nicole A1 - Grässel, Susanne A1 - Hornberger, Helga T1 - In Vitro Analysis of Human Cartilage Infiltrated by Hydrogels and Hydrogel-Encapsulated Chondrocytes JF - Bioengineering N2 - Osteoarthritis (OA) is a degenerative joint disease causing loss of articular cartilage and structural damage in all joint tissues. Given the limited regenerative capacity of articular cartilage, methods to support the native structural properties of articular cartilage are highly anticipated. The aim of this study was to infiltrate zwitterionic monomer solutions into human OA-cartilage explants to replace lost proteoglycans. The study included polymerization and deposition of methacryloyloxyethyl-phosphorylcholine- and a novel sulfobetaine-methacrylate-based monomer solution within ex vivo human OA-cartilage explants and the encapsulation of isolated chondrocytes within hydrogels and the corresponding effects on chondrocyte viability. The results demonstrated that zwitterionic cartilage–hydrogel networks are formed by infiltration. In general, cytotoxic effects of the monomer solutions were observed, as was a time-dependent infiltration behavior into the tissue accompanied by increasing cell death and penetration depth. The successful deposition of zwitterionic hydrogels within OA cartilage identifies the infiltration method as a potential future therapeutic option for the repair/replacement of OA-cartilage extracellular suprastructure. Due to the toxic effects of the monomer solutions, the focus should be on sealing the OA-cartilage surface, instead of complete infiltration. An alternative treatment option for focal cartilage defects could be the usage of monomer solutions, especially the novel generated sulfobetaine-methacrylate-based monomer solution, as bionic for cell-based 3D bioprintable hydrogels. KW - osteoarthritis KW - human articular cartilage KW - chondrocytes KW - hydrogels KW - zwitterionic monomers KW - infiltration Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-61235 N1 - Corresponding author: Helga Hornberger VL - 10 SP - 1 EP - 21 PB - MDPI ER - TY - JOUR A1 - Hornberger, Helga A1 - Kissel, Hannah A1 - Striegl, Birgit A1 - Kronseder, Matthias A1 - Vollnhals, Florian A1 - Christiansen, Silke H. T1 - Bioactivity and corrosion behavior of magnesium barrier membranes JF - Materials and Corrosion N2 - In the current research, magnesium and its alloys have been intensively studied as resorbable implant materials. Magnesium materials combine their good mechanical properties with bioactivity, which make them interesting for guided bone regeneration and for the application as barrier membranes. In this study, the in vitro degradation behavior of thin magnesium films was investigated in cell medium and simulated body fluid. Three methods were applied to evaluate corrosion rates: measurements of (i) the gaseous volume evolved during immersion, (ii) volume change after immersion, and (iii) polarization curves. In this comparison, measurements of H2 development in Dulbecco's modified Eagle's medium showed to be the most appropriate method, exhibiting a corrosion rate of 0.5 mm·year−1. Observed oxide and carbon contamination have a high impact on controlled degradation, suggesting that surface treatment of thin foils is necessary. The bioactivity test showed positive results; more detailed tests in this area are of interest. Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-24499 N1 - Corresponding author: Helga Hornberger VL - 73 IS - 1 SP - 8 EP - 19 PB - Wiley ER - TY - JOUR A1 - Kloiber, Jessica A1 - Anetsberger, Viktoria A1 - Schultheiß, Ulrich A1 - Hornberger, Helga T1 - High quality surfaces of magnesium alloy AZ31 by adjusting appropriate electropolishing parameters JF - Electrochimica Acta Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-79298 N1 - Corresponding author der OTH Regensburg: Jessica Kloiber VL - 513 PB - Elsevier ER - TY - JOUR A1 - Kloiber, Jessica A1 - Schultheiß, Ulrich A1 - Hornberger, Helga T1 - Impact of heat treatment on the surface quality of electropolished WE43 alloy JF - Materials Letters N2 - In this study, the Mg alloy WE43 was solution annealed and precipitation hardened prior to electropolishing to evaluate the effects of different microstructures on the electropolishing result. While coarsely distributed precipitates led to surfaces showing wavy structures and dents after electropolishing, a uniform microstructure resulted in an even finish of the surface. The homogenization and refinement of the microstructure by heat treatment is a method to ensure improved electropolished surfaces of Mg materials Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-83512 SN - 0167-577X N1 - Corresponding author der OTH Regensburg: Jessica Kloiber VL - 397 PB - Elsevier BV ER - TY - JOUR A1 - Loo, Xuyan A1 - Nagaraju, Bhavana A1 - Pathivada, Sai A1 - Bartsch, Alexander A1 - Schratzenstaller, Thomas A1 - Sattler, Robert A1 - Monkman, Gareth J. T1 - Electrical properties of bisphenol-A-free magnetoactive borosilicate polymers JF - AIP Advances N2 - The recent REACH regulations require the elimination of bisphenol-A and titanium dioxide from commercially available boron-based polymers. This has led to changes in some of the mechanical characteristics, which strongly influence the properties of magnetoactive borosilicate polymers. This work delivers results on the electrical properties and discusses some implications for future research using bisphenol-A and titanium-dioxide-free substitutes. KW - Electrical components KW - Electrical properties and parameters KW - Dielectric properties KW - Electrical resistivity KW - Magnetic materials KW - Viscoelasticity KW - Polymers KW - Non Newtonian fluids KW - Magnetic fluids Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-72936 SN - 2158-3226 N1 - Corresponding author der OTH Regensburg: Gareth J. Monkman VL - 14 IS - 5 PB - AIP Publishing ER - TY - JOUR A1 - Tauwald, Sandra Melina A1 - Erzinger, Florian A1 - Quadrio, Maurizio A1 - Rütten, Markus A1 - Stemmer, Christian A1 - Krenkel, Lars T1 - Tomo-PIV in a patient-specific model of human nasal cavities: a methodological approach JF - Measurement Science and Technology N2 - The human nose serves as the primary gateway for air entering the respiratory system and plays a vital role in breathing. Nasal breathing difficulties are a significant health concern, leading to substantial healthcare costs for patients. Understanding nasal airflow dynamics is crucial for comprehending respiratory mechanisms. This article presents a detailed study using tomo-Particle Image Velocimetry (PIV) to investigate nasal airflow dynamics while addressing its accuracy. Embedded in the OpenNose project, the work described aims to provide a validation basis for different numerical approaches to upper airway flow. The study includes the manufacturing of a transparent silicone model based on a clinical CT scan, refractive index matching to minimize optical distortions, and precise flow rate adjustments based on physiological breathing cycles. This method allows for spatial high-resolution investigations in different regions of interest within the nasopharynx during various phases of the breathing cycle. The results demonstrate the accuracy of the investigations, enabling detailed analysis of flow structures and gradients. This spatial high-resolution tomo-PIV approach provides valuable insights into the complex flow phenomena occurring during the physiological breathing cycle in the nasopharynx. The study's findings contribute to advancements in non-free-of-sight experimental flow investigation of complex cavities under nearly realistic conditions. Furthermore, reliable and accurate experimental data is crucial for properly validating numerical approaches that compute this patient-specific flow for clinical purposes. Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-70393 N1 - Corresponding author: Sandra Melina Tauwald VL - 35 IS - 5 PB - IOP Publishing ER - TY - JOUR A1 - Hillebrand, Patrick A1 - Westner, Markus T1 - Success factors of long-term CIOs JF - Information Systems and e-Business Management N2 - Although the average tenure of CIOs has increased over the last years, the majority of CIOs have been in their positions for only three years or less. Nevertheless, some CIOs have been successful in their position for a long time. In this study, we use tenure as a proxy for success as a CIO. The goal of this paper is to examine factors that are critical to the success of long-term CIOs. For this purpose, we created and analyzed resumes of 384 CIOs. Out of these 384, we conducted 19 interviews with CIOs from top-tier companies and collected and analyzed both qualitative and quantitative data. In the process, we were able to identify nine factors that are critical for the success (CSF) of CIOs. These factors fall into three categories. Category “Personality” includes “Accepting and embracing change” (CSF #1), “Being perseverant to pursue long-term goals” (CSF #2), “Anticipating the future through visionary thinking” (CSF #3), and “Being empathetic to deal with uncertainty felt by co-workers” (CSF #4). The “Role Fulfilment” category includes “Cross-functional involvement and integration of the IT organization” (CSF #5), “Positioning and restructuring of the IT organization” (CSF #6), and “Well-connected and communicative leadership” (CSF #7). The “Organizational Environment” category consists of “Availability of skilled workforce” (CSF #8) and “Reporting line to the CEO” (CSF #9). CSFs 1, 2, and 3 were perceived as most important by the participating CIOs. The results may be of particular interest both to aspiring CIOs and equally their employing organizations, as they reflect what long-term CIOs value during their time in office. KW - Chief information officer KW - CIO tenure KW - Critical success factors KW - CIO roles KW - Interview-based exploratory mixed-method study Y1 - 2022 U6 - https://doi.org/10.1007/s10257-021-00546-z N1 - Corresponding Author: Markus Westner VL - 20 SP - 79 EP - 122 PB - Springer Nature ER - TY - JOUR A1 - Schoenenwald, Alexander A1 - Kern, Simon A1 - Viehhauser, Josef A1 - Schildgen, Johannes T1 - Collecting and visualizing data lineage of Spark jobs JF - Datenbank-Spektrum N2 - Metadata management constitutes a key prerequisite for enterprises as they engage in data analytics and governance. Today, however, the context of data is often only manually documented by subject matter experts, and lacks completeness and reliability due to the complex nature of data pipelines. Thus, collecting data lineage—describing the origin, structure, and dependencies of data—in an automated fashion increases quality of provided metadata and reduces manual effort, making it critical for the development and operation of data pipelines. In our practice report, we propose an end-to-end solution that digests lineage via (Py‑)Spark execution plans. We build upon the open-source component Spline, allowing us to reliably consume lineage metadata and identify interdependencies. We map the digested data into an expandable data model, enabling us to extract graph structures for both coarse- and fine-grained data lineage. Lastly, our solution visualizes the extracted data lineage via a modern web app, and integrates with BMW Group’s soon-to-be open-sourced Cloud Data Hub. Y1 - 2021 U6 - https://doi.org/10.1007/s13222-021-00387-7 N1 - Corresponding author: Johannes Schildgen VL - 21 IS - 3 SP - 179 EP - 189 PB - Springer Nature ER -