TY - JOUR A1 - Lindner, Matthias A1 - Pipa, Andrei V. A1 - Karpen, Norbert A1 - Hink, Rüdiger A1 - Berndt, Dominik A1 - Foest, Rüdiger A1 - Bonaccurso, Elmar A1 - Weichwald, Robert A1 - Friedberger, Alois A1 - Caspari, Ralf A1 - Brandenburg, Ronny A1 - Schreiner, Rupert T1 - Icing Mitigation by MEMS-Fabricated Surface Dielectric Barrier Discharge JF - Applied Sciences N2 - Avoiding ice accumulation on aerodynamic components is of enormous importance to flight safety. Novel approaches utilizing surface dielectric barrier discharges (SDBDs) are expected to be more efficient and effective than conventional solutions for preventing ice accretion on aerodynamic components. In this work, the realization of SDBDs based on thin-film substrates by means of micro-electro-mechanical-systems (MEMS) technology is presented. The anti-icing performance of the MEMS SDBDs is presented and compared to SDBDs manufactured by printed circuit board (PCB) technology. It was observed that the 35 mu m thick electrodes of the PCB SDBDs favor surface icing with an initial accumulation of supercooled water droplets at the electrode impact edges. This effect was not observed for 0.3 mu m thick MEMS-fabricated electrodes indicating a clear advantage for MEMS-technology SDBDs for anti-icing applications. Titanium was identified as the most suitable material for MEMS electrodes. In addition, an optimization of the MEMS-SDBDs with respect to the dielectric materials as well as SDBD design is discussed. KW - aerospace engineering KW - anti-icing KW - DBD PLASMA ACTUATORS KW - EXCITATION KW - FLOW-CONTROL KW - low-temperature plasma KW - MEMS KW - SEPARATION CONTROL KW - SDBD Y1 - 2021 U6 - https://doi.org/10.3390/app112311106 N1 - Corresponding author: Matthias Lindner VL - 11 IS - 23 SP - 1 EP - 17 PB - MDPI CY - Basel ER - TY - JOUR A1 - Gamisch, Bernd A1 - Huber, Lea A1 - Gaderer, Matthias A1 - Dawoud, Belal T1 - On the Kinetic Mechanisms of the Reduction and Oxidation Reactions of Iron Oxide/Iron Pellets for a Hydrogen Storage Process JF - Energies N2 - This work aims at investigating the kinetic mechanisms of the reduction/oxidation (redox) reactions of iron oxide/iron pellets under different operating conditions. The reaction principle is the basis of a thermochemical hydrogen storage system. To simulate the charging phase, a single pellet consisting of iron oxide (90% Fe2O3, 10% stabilising cement) is reduced with different hydrogen (H2) concentrations at temperatures between 600 and 800 °C. The discharge phase is initiated by the oxidation of the previously reduced pellet by water vapour (H2O) at different concentrations in the same temperature range. In both reactions, nitrogen (N2) is used as a carrier gas. The redox reactions have been experimentally measured in a thermogravimetric analyser (TGA) at a flow rate of 250 mL/min. An extensive literature review has been conducted on the existing reactions’ kinetic mechanisms along with their applicability to describe the obtained results. It turned out that the measured kinetic results can be excellently described with the so-called shrinking core model. Using the geometrical contracting sphere reaction mechanism model, the concentration- and temperature-dependent reduction and oxidation rates can be reproduced with a maximum deviation of less than 5%. In contrast to the reduction process, the temperature has a smaller effect on the oxidation reaction kinetics, which is attributed to 71% less activation energy (Ea,Re=56.9 kJ/mol versus Ea,Ox=16.0 kJ/mol). The concentration of the reacting gas showed, however, an opposite trend: namely, to have an almost twofold impact on the oxidation reaction rate constant compared to the reduction rate constant. Y1 - 2022 U6 - https://doi.org/10.3390/en15218322 N1 - Corresponding author: Belal Dawoud VL - 15 IS - 21 PB - MDPI ER - TY - JOUR A1 - Käss, Sebastian A1 - Strahringer, Susanne A1 - Westner, Markus T1 - A Multiple Mini Case Study on the Adoption of Low Code Development Platforms in Work Systems JF - IEEE Access N2 - Although adopting Low Code Development Platforms (LCDPs) promises significant efficiency and effectiveness improvements for application development, its adoption still needs further empirical research. This paper uses a combinatorial approach to research LCDP adoption and presents the results of a multiple mini case study with 36 cases on LCDP adoption. A combination of the Socio-Technical Systems theory and the Technology-Organisational-Environment model is used as a theoretical lens. In this paper, we show that LCDP adoption is a multifaceted phenomenon and identify three archetypes for LCDP adoption (i.e., IT Resource Shortage Mitigators, Application Development Democratisers, and Synergy Realisers) and one archetype for LCDP non-adoption (i.e., Intricacy Adversaries). Each archetype can be interpreted as an individual path towards LCDP (non-)adoption. Based on these archetypes, we derive seven starting points for practitioners to adopt LCDPs in work systems. Moreover, by using the theoretical lenses, the paper shows that for an LCDP adoption to occur, an optimisation of the social and technical sub-systems is required. KW - Low Code Development Platform KW - Adoption KW - Case study Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-65634 SN - 2169-3536 N1 - Corresponding author: Markus Westner SP - 118762 EP - 118786 PB - IEEE ER - TY - JOUR A1 - Kriegl, Raphael A1 - Kravanja, Gaia A1 - Hribar, Luka A1 - Čoga, Lucija A1 - Drevenšek‐Olenik, Irena A1 - Jezeršek, Matija A1 - Kalin, Mitjan A1 - Shamonin (Chamonine), Mikhail T1 - Microstructured Magnetoactive Elastomers for Switchable Wettability JF - Polymers N2 - We demonstrate the control of wettability of non-structured and microstructured magnetoactive elastomers (MAEs) by magnetic field. The synthesized composite materials have a concentration of carbonyl iron particles of 75 wt.% (≈27 vol.%) and three different stiffnesses of the elastomer matrix. A new method of fabrication of MAE coatings on plastic substrates is presented, which allows one to enhance the response of the apparent contact angle to the magnetic field by exposing the particle-enriched side of MAEs to water. A magnetic field is not applied during crosslinking. The highest variation of the contact angle from (113 ± 1)° in zero field up to (156 ± 2)° at about 400 mT is achieved in the MAE sample with the softest matrix. Several lamellar and pillared MAE structures are fabricated by laser micromachining. The lateral dimension of surface structures is about 50 µm and the depth varies between 3 µm and 60 µm. A systematic investigation of the effects of parameters of laser processing (laser power and the number of passages of the laser beam) on the wetting behavior of these structures in the absence and presence of a magnetic field is performed. In particular, strong anisotropy of the wetting behavior of lamellar structures is observed. The results are qualitatively discussed in the framework of the Wenzel and Cassie-Baxter models. Finally, directions of further research on magnetically controlled wettability of microstructured MAE surfaces are outlined. The obtained results may be useful for the development of magnetically controlled smart surfaces for droplet-based microfluidics. Y1 - 2022 U6 - https://doi.org/10.3390/polym14183883 N1 - Corresponding authors: Raphael Kriegl und Mikhail Shamonin VL - 14 IS - 18 SP - 1 EP - 21 PB - MDPI ER - TY - JOUR A1 - Lehrer, Tobias A1 - Kaps, Arne A1 - Lepenies, Ingolf A1 - Duddeck, Fabian A1 - Wagner, Marcus T1 - 2S-ML: A simulation-based classification and regression approach for drawability assessment in deep drawing JF - International Journal of Material Forming N2 - New structural sheet metal parts are developed in an iterative, time-consuming manner. To improve the reproducibility and speed up the iterative drawability assessment, we propose a novel low-dimensional multi-fidelity inspired machine learning architecture. The approach utilizes the results of low-fidelity and high-fidelity finite element deep drawing simulation schemes. It hereby relies not only on parameters, but also on additional features to improve the generalization ability and applicability of the drawability assessment compared to classical approaches. Using the machine learning approach on a generated data set for a wide range of different cross-die drawing configurations, a classifier is trained to distinguish between drawable and non-drawable setups. Furthermore, two regression models, one for drawable and one for non-drawable designs are developed that rank designs by drawability. At instantaneous evaluation time, classification scores of high accuracy as well as regression scores of high quality for both regressors are achieved. The presented models can substitute low-fidelity finite element models due to their low evaluation times while at the same time, their predictive quality is close to high-fidelity models. This approach may enable fast and efficient assessments of designs in early development phases at the accuracy of a later design phase in the future. KW - One-step KW - Deep drawing KW - Drawability KW - Meta-modeling KW - Machine learning Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-64664 N1 - Corresponding author: Tobias Lehrer VL - 16 SP - 1 EP - 17 PB - Springer ER - TY - JOUR A1 - Mikhaeil, Makram A1 - Nowak, Sebastian A1 - Palomba, Valeria A1 - Frazzica, Andrea A1 - Gaderer, Matthias A1 - Dawoud, Belal T1 - Experimental and analytical investigation of applying an asymmetric plate heat exchanger as an evaporator in a thermally driven adsorption appliance JF - Applied Thermal Engineering N2 - This communication presents an experimental and analytical study on the evaporation mechanism in a closed-structured asymmetric plate heat exchanger (PHE) employed as a stagnant water evaporator for the application in an adsorption heat transformation appliance. To this aim, an experimental unit is constructed, which comprises two identical PHEs, one acting as an vaporator/condenser and the second, as an adsorber/desorber. Two endoscopes are mounted inside the investigated evaporator to visualize the evaporation mechanism when performing adsorption-evaporation processes under different boundary conditions. It turned out that the evaporation mechanism is a partially covered, thin film evaporation. A heat transfer analysis is performed to evaluate the heat transfer coefficient of the thin film evaporation () inside the investigated evaporator, resulting in -values between 1330 and 160 [W∙m−2∙K−1] over the investigated adsorption-evaporation time. Correlating the obtained () to the film thickness and the wetted area results in -values between 0.34 and 0.78 [mm] and wetted to total area ratios of 0.78 to 0.16. Besides, an analytical model has been developed and introduced to correlate the overall evaporator heat transfer coefficient with the adsorption potential and the time rate of change of the water uptake. KW - Adsorption-evaporation KW - Evaporator KW - Plate heat exchanger KW - Thin film evaporation Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-61115 N1 - Corresponding author: Belal Dawoud IS - 228 PB - Elsevier ER - TY - CHAP A1 - Karamara, Merve A1 - Bogdanski, Moritz-Ole A1 - Zöller, Raphael A1 - Albrecht, Sophie Viktoria A1 - Linner, Thomas A1 - Bock, Thomas A1 - Braml, Thomas T1 - Increasing efficiency and sustainability: A comparative analysis of concrete 3D printing and traditional methods based on case studies T2 - MATEC Web of Conferences N2 - At the forthcoming Concrete Solutions 2025 conference, the subject of concrete 3D printing will be explored in the “Case Studies” category, with a comparison to traditional methods. Concrete 3D printing offers several significant advantages, including the ability to create complex geometries, increased material efficiency, faster build times and cost savings. These are particularly important in the context of the current skilled labour shortage and emphasis on resource efficiency in construction. Nevertheless, challenges persist in the areas of machine reliability, process integration, and material adaptation to meet the requirements of 3D printing. The case studies will present modular and design-engineering-based strategies for the development of efficient, scalable automation solutions that integrate 3D printing into existing processes and allow for project-specific customisation through selective automation. These findings provide a robust framework for industrial applications that enhance efficiency and adaptability. By comparing concrete 3D printing to conventional methods, the insights offer a foundation for advancing automated production in construction, promoting scalable, resource-efficient, and economically sustainable practices that address the industry’s evolving demands. Y1 - 2025 U6 - https://doi.org/10.1051/matecconf/202540913005 N1 - Corresponding author der OTH Regensburg: Merve Karamara VL - 409 PB - EDP Sciences ER - TY - JOUR A1 - Franke, Markus A1 - Wagner, Marcus A1 - Krause, Tom Janis T1 - Data-driven model order reduction with surrogate elements for transient simulations JF - Engineering Computations : International journal for computer-aided engineering and software N2 - Purpose – The purpose of this study is to introduce surrogate elements for static and transient finite element simulations. These elements are designed to replace regions of several conventional solid elements with a single artificial element that possesses a reduced number of degrees of freedoms (dofs). A notable advantage of our surrogate elements is their seamless integration into standard finite element meshes. Design/methodology/approach – The construction of the surrogate elements stiffness and mass matrices is achieved through an optimization process wherein displacements serve as the optimization objective. Moreover, the matrices are designed to possess properties analogous to those of standard finite elements. A particular focus is placed on ensuring that the artificial stiffness matrices are positive semi-definite. Furthermore, artificial degrees of freedom are introduced. Findings – The efficacy of the proposed technique is demonstrated through its application to two different use cases. It is demonstrated that, despite being trained on examples comprising a single surrogate element, the surrogate elements can be employed multiple times within complex and practical models. The degree of accuracy achieved in these applications is noteworthy. Moreover, the proposed method is considerably faster than the fully discretized models. Originality/value – The study expands the field of substructuring and model order reduction by incorporating artificial surrogate elements built by neural networks, which enables seamless integration with standard finite element analysis via positive semi-definite matrices. Furthermore, the introduction of artificial degrees of freedom, which are detached from the computational domain, is proposed. Once trained, the surrogate elements can be utilised in load and support independent scenarios. Y1 - 2025 U6 - https://doi.org/10.1108/EC-06-2024-0511 VL - 2025 PB - Emerald Publishing CY - Leeds ER - TY - JOUR A1 - Hillebrand, Patrick A1 - Westner, Markus A1 - Matschi, Markus T1 - Schlüsselfaktoren erfolgreicher CIOs JF - HMD Praxis der Wirtschaftsinformatik N2 - Die vorliegende Studie untersucht Schlüsselfaktoren erfolgrei- cher CIOs in deutschen Großunternehmen. Mit einer mittleren Verweildauer (Median) von 4,0 Jahren weisen deutsche CIOs, die mit 43 % noch überwiegend an den CFO berichten, im Vergleich zu anderen C-Level-Positionen eine deutlich kürzere Verweildauer im Amt auf. Die Ergebnisse aus 60 Interviews mit erfolgreichen deutschsprachigen CIOs, die primär über eine überdurchschnittlich lange Verweildauer verfügen, lassen verschiedene Schlüsselfaktoren für den Erfolg erkennen: Grundvoraussetzung ist stets die Gewährleistung eines sicheren und effizienten IT-Betriebs. Über effektive und innovative Change-Projekte machen die interviewten CIOs den IT-Mehrwert transparent und agieren als Brückenbauer zwischen IT und Fachbereichen. Dadurch wirken sie positiv auf die Firmenkultur ein und etablieren die IT nachhaltig in den Fachbereichen als Erfolgsfaktor. Erfolgreiche CIOs selbst sind keine „Techies“, sondern zeichnen sich durch hohe Führungskompetenz und ein hohes Geschäftsverständnis, gepaart mit visionärem Denken aus. Dadurch gelingt es ihnen, die IT zukunftsorientiert auszurichten und Anforderungen und Potenziale für und aus den Fachbereichen frühzeitig zu antizipieren. Die zukünftige Entwicklung der CIO-Organisation und der Paradigmen in der IT wird durch die Studienteilnehmer hingegen teilweise kontrovers diskutiert – so gibt es beispielsweise bei der Beurteilung der Sinnhaftigkeit und Relevanz der CDO-Position noch kein einheitliches Meinungsbild. Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-33751 N1 - Corresponding author: Markus Westner VL - 59 SP - 762 EP - 779 PB - Springer Nature ER - TY - JOUR A1 - Thumann, Philipp A1 - Buchner, Stefan A1 - Marburg, Steffen A1 - Wagner, Marcus T1 - A comparative study of Glinka and Neuber approaches for fatigue strength assessment on 42CrMoS4-QT specimens JF - Strain N2 - In fatigue strength assessment, the methods based on ideal elastic stresses according to Basquin and the less established method based on elastic-plastic stress quantities according to Manson, Coffin and Morrow are applied. The former calculates loads using linear-elastic stresses, the latter requires elasticplastic evaluation parameters, such as stresses and strains. These can be determined by finite element analysis (FEA) with a linear-elastic constitutive law, and subsequent conversion to elastic-plastic loads, using the macro support formula by Neuber. In this contribution, an alternative approach to approximate elastic-plastic parameters proposed by Glinka is compared to the the strain-life method using Neuber's formula, as well as the stress-life method of Basquin. Several component tests on 42CrMoS4-QT specimens are investigated. To determine the input data for the fatigue strength evaluations, the entire test setup is computed by FEA. The nodal displacements from these validated full-model simulations are used as boundary conditions for a submodel simulation of a notch, whose results serve as input for the fatigue strength assessments. It is shown that all approaches provide a reliable assessment of components. Our key result is that the strain-life method using the concept by Glinka for notch stress computation, yields improved results in fatigue strength assessments. KW - 42CrMoS4-QT KW - fatigue strength KW - stress-life method KW - Glinka KW - strain-life method Y1 - 2023 U6 - https://doi.org/10.1111/str.12470 SN - 1475-1305 N1 - Corresponding author: Marcus Wagner VL - 2023 IS - e12470 PB - Wiley ER - TY - JOUR A1 - Schuhegger, Lukas A1 - Kara, Sinan A1 - Galka, Stefan A1 - Dünnweber, Jan A1 - Meißner, Sebastian T1 - Umzugsplanung mit Fabrikdatenmodellen und Virtual Reality JF - Zeitschrift für wirtschaftlichen Fabrikbetrieb N2 - Angesichts eines dynamischen industriellen Umfelds müssen produzierende Unternehmen flexibel bleiben und sich kontinuierlich anpassen, um ihre Wettbewerbsfähigkeit zu erhalten. Eine effektive Planung von Restrukturierungen in Produktionssystemen, oft als Umzugsplanung bezeichnet, ist entscheidend, um Verzögerungen zu vermeiden und Stillstandszeiten zu minimieren. Die Identifikation von Umzugsfällen, welche den Umfang umzuziehender Ressourcen wie Maschinen, Anlagen, Ausrüstungen und Arbeitsplätzen beschreiben und die Definition zugehöriger Aufgaben sind essenzielle Schritte der Umzugsplanung. Dieser Beitrag stellt eine Vorgehensweise zur Bestimmung von Umzugsfällen mittels eines Fabrikdatenmodells vor, ergänzt durch eine Visualisierung in Virtual Reality, um Planende bei der Umzugsplanung zu unterstützen. N2 - Given a dynamic industrial environment, manufacturing companies must remain flexible and continuously adapt to maintain their competitiveness. Effective planning of restructuring efforts in production systems, often referred to as reconfiguration planning, is crucial to avoid delays and minimize downtime. Identifying reconfiguration cases, which describe the scope of resources to be relocated, such as machines, equipment, and workstations, and defining the associated tasks are essential steps in reconfiguration planning. This paper presents an approach for determining reconfiguration cases using a factory data model, complemented by visualization in virtual reality, to support planners in the reconfiguration process. KW - Fabrikdatenmodel KW - Virtual Reality KW - Umzugsplanung KW - Restrukturierung KW - Umstellung KW - Factory Data Model KW - Reconfiguration Planning KW - Restructuring KW - Relocation KW - Virtual Reality Y1 - 2024 U6 - https://doi.org/10.1515/zwf-2024-1154 SN - 2511-0896 SN - 0947-0085 N1 - Corresponding author der OTH Regensburg: Lukas Schuhegger VL - 119 IS - 11 SP - 799 EP - 804 PB - de Gruyter ER - TY - JOUR A1 - Schmidbauer, Simon A1 - Becker, Maria A1 - Haug, Sonja T1 - Online Political Participation of Refugees in Germany: Analysis of a Survey in Bavaria JF - Sage Online N2 - New media are an important resource for the political participation of marginalized groups. However, there is still a lack of knowledge about the factors that influence whether this opportunity is used. Influencing factors emerge from both the Civic Voluntarism Model and previous research on migrants’ political activity. Using data collected in 2019/2020 from 486 refugees living in Bavaria, we estimate linear probability models to investigate facilitating factors for the use of new media for political participation. The analysis shows that refugees in Germany who inform themselves about politics online tend to be predominantly male, higher educated, and politically involved. Language skills and the duration of stay also appear to be important. For the expression of one’s political opinion online, gender and language skills have an impact, but informing oneself about German politics, political interest, and offline political activity in Germany are the most relevant factors. This indicates that there is a close link between on- und offline activity. However, using the internet requires particular resources, so that people with lower language skills, for example, are particularly disadvantaged. KW - political participation KW - internet use KW - refugees KW - political online participation Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-77671 N1 - Corresponding author der OTH Regensburg: Sonja Haug PB - Sage CY - Thousand Oaks ER - TY - JOUR A1 - Grad, Marius A1 - Schultheiß, Ulrich A1 - Diemar, Andreas A1 - Spieß, Lothar A1 - Noster, Ulf T1 - Preparation methodology for the microstructural characterization of diffusion layers in a titanium/steel composite JF - Practical Metallography N2 - Hot pressing of titanium and carbon steel leads to the formation of a diffusion layer at the interface. Depending on the carbon content of the steel used, it either exclusively contains TiC or additional other phases. In the case of steel with a medium carbon concentration (0.67 wt.% C), a pure TiC layer forms. A preparation methodology was developed to make statements about functional and microstructural properties of the respective layers such as layer thickness, porosity, or grain size. However, apart from the diffusion layer’s microstructure, it also reveals the microstructure of the two base substrates. A comparison based on electron backscatter diffraction (EBSD) examinations yields similar results in terms of microstructure. A micrograph analysis based on the new preparation methodology also allows confirming the element distribution measurement by glow discharge optical emission spectroscopy (GDOES). The methodology therefore provides a way of quickly and reliably controlling the layer formation during the hot pressing process of titanium and carbon steel. N2 - Beim Heißpressen von Titan und Kohlenstoffstahl entsteht an der Grenzfläche eine Diffusionsschicht, welche abhängig vom Kohlenstoffgehalt des verwendeten Stahls entweder ausschließlich TiC oder zusätzliche andere Phasen enthält. Im Fall eines Stahls mit mittlerer Kohlenstoffkonzentration (0,67 wt.-% C) bildet sich eine reine TiC-Schicht. Um eine Aussage über die funktionalen und mikrostrukturellen Eigenschaften, wie Schichtdicke, Porosität oder Korngröße, entsprechender Schichten treffen zu können, wurde eine Präparationsmethodik entwickelt. Hierbei wird jedoch nicht nur das Gefüge der Diffusionsschicht, sondern auch das der beiden Grundsubstrate entwickelt. Ein Vergleich mit Elektronenrückstreubeugungs-Untersuchungen (EBSD) liefert hinsichtlich der Mikrostruktur vergleichbare Ergebnisse. Auch die Messung der Elementverteilung durch Glimmentladungsspektroskopie (GDOES) kann durch eine Schliffbildanalyse unter Anwendung der neuen Präparationsmethodik belegt werden. Die Methodik stellt also eine Möglichkeit zur schnellen und sicheren Kontrolle der Schichtbildung beim Heißpressen von Titan und Kohlenstoffstahl dar. T2 - Präparationsmethodik zur mikrostrukturellen Charakterisierung von Diffusionsschichten eines Titan-Stahl-Verbunds KW - Diffusion layers KW - TiC KW - microstructure KW - preparation methodology KW - EBSD KW - GDOES Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-78346 SN - 2195-8599 N1 - Corresponding author der OTH Regensburg: Marius Grad VL - 61 IS - 12 SP - 938 EP - 946 PB - Walter de Gruyter GmbH ER -