TY - JOUR A1 - Burdin, Dmitrii A. A1 - Ekonomov, Nikolai A. A1 - Chashin, Dmitri V. A1 - Fetisov, Leonid Y. A1 - Fetisov, Yuri K. A1 - Shamonin (Chamonine), Mikhail T1 - Temperature Dependence of the Resonant Magnetoelectric Effect in Layered Heterostructures JF - Materials N2 - The dependence of the resonant direct magnetoelectric effect on temperature is studied experimentally in planar composite structures. Samples of rectangular shapes with dimensions of 5 mm x 20 mm employed ferromagnetic layers of either an amorphous (metallic glass) alloy or nickel with a thickness of 20-200 m and piezoelectric layers of single crystalline langatate material or lead zirconate titanate piezoelectric ceramics with a thickness of 500 m. The temperature of the samples was varied in a range between 120 and 390 K by blowing a gaseous nitrogen stream around them. It is shown that the effective characteristics of the magnetoelectric effectsuch as the mechanical resonance frequency f(r), the quality factor Q and the magnitude of the magnetoelectric coefficient (E) at the resonance frequencyare contingent on temperature. The interrelations between the temperature changes of the characteristics of the magnetoelectric effect and the temperature variations of the following material parametersYoung's modulus Y, the acoustic quality factor of individual layers, the dielectric constant epsilon, the piezoelectric modulus d of the piezoelectric layer as well as the piezomagnetic coefficients ((n)) of the ferromagnetic layerare established. The effect of temperature on the characteristics of the nonlinear magnetoelectric effect is observed for the first time. The results can be useful for designing magnetoelectric heterostructures with specified temperature characteristics, in particular, for the development of thermally stabilized magnetoelectric devices. KW - acoustic quality factor KW - composite structure KW - linear KW - magnetoelectric effect KW - magnetoelectric heterostructure KW - magnetostriction KW - nonlinear KW - piezoelectric KW - temperature dependence Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-32185 N1 - corresponding author: Mikhail Shamonin VL - 10 IS - 10 PB - MDPI ER - TY - JOUR A1 - Monkman, Gareth J. A1 - Sindersberger, Dirk A1 - Prem, Nina T1 - Magnetically enhanced photoconductive high voltage control JF - ISSS Journal of Micro and Smart Systems N2 - The recent surge of interest in electrostatic actuators, particularly for soft robotic applications, has placed increasing demands on high voltage control technology. In this respect, optoelectronic bidirectional switching and analogue regulation of high voltages is becoming increasingly important. One common problem is the leakage current due to dark resistance of the material or device used. Another is the physical size of such elements. However, their ability to provide galvanic separation makes them a very attractive alternative to conventional (wired) semiconductor elements. This paper gives an overview of available methods and devices before introducing a concept based on the combination of photoresistive and magnetoresistive effects in Gallium Arsenide that are potentially applicable to other semiconductor materials. KW - GaAs KW - High voltage actuators KW - Magnetoresistance KW - Opto-sensors KW - Photoconduction KW - Soft robotics Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-30606 N1 - Corresponding author: Gareth J. Monkman VL - 11 SP - 317 EP - 328 PB - Springer Nature ER - TY - CHAP A1 - Diehl, Andreas A1 - Wolff, Lilli A1 - Fuhrmann, Thomas A1 - Niemetz, Michael A1 - Mörtlbauer, Stefanie A1 - Dirnberger, Sandra T1 - Compact Freshmen Welcome Seminar for Engineering Students T2 - Procedia - Social and Behavioral Sciences N2 - The Faculty of Electrical Engineering and Information Technology of the OTH Regensburg developed and implemented a compact freshmen seminar for the afternoon of the first day of study. The intention of this seminar is to help the freshmen during their transition between school and study without losing lecture time in the first semester. The concept was tested with one small study group at the beginning of the summer semester 2015. To rate the impact of the seminar and to find aspects for continuous improvement an evaluation method was developed and used. Due to the good student resonance during the first run, this introduction seminar was held again in the winter semester 2015/16. It is planned to integrate this seminar as a regular session for all freshmen of the faculty curriculum and monitor the long-term effects of student motivation and success. KW - Engineering Education KW - Freshmen Seminar Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-31034 N1 - Corresponding author: Thomas Fuhrmann IS - 228 SP - 45 EP - 52 PB - Elsevier ER - TY - JOUR A1 - Sterner, Michael A1 - Specht, Michael T1 - Power-to-Gas and Power-to-X-The History and Results of Developing a New Storage Concept JF - Energies N2 - Germany's energy transition, known as 'Energiewende', was always very progressive. However, it came technically to a halt at the question of large-scale, seasonal energy storage for wind and solar, which was not available. At the end of the 2000s, we combined our knowledge of both electrical and process engineering, imitated nature by copying photosynthesis and developed Power-to-Gas by combining water electrolysis with CO2-methanation to convert water and CO2 together with wind and solar power to synthetic natural gas. Storing green energy by coupling the electricity with the gas sector using its vast TWh-scale storage facility was the solution for the biggest energy problem of our time. This was the first concept that created the term 'sector coupling' or 'sectoral integration'. We first implemented demo sites, presented our work in research, industry and ministries, and applied it in many macroeconomic studies. It was an initial idea that inspired others to rethink electricity as well as eFuels as an energy source and energy carrier. We developed the concept further to include Power-to-Liquid, Power-to-Chemicals and other ways to 'convert' electricity into molecules and climate-neutral feedstocks, and named it 'Power-to-X'at the beginning of the 2010s. KW - 100% renewable energy scenarios KW - CARBON RECYCLING SYSTEM KW - CO2 KW - eFuels KW - electric fuels KW - energy transition KW - hydrogen KW - methanation KW - METHANOL KW - Power-to-Gas KW - Power-to-Hydrogen KW - Power-to-Methane KW - Power-to-X KW - sector coupling KW - sectoral integration KW - TRANSPORTATION Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-26202 N1 - Corresponding author: Michael Sterner VL - 14 IS - 20 PB - MDPI ER - TY - JOUR A1 - Schiek, Roland T1 - Excitation of nonlinear beams: from the linear Talbot effect through modulation instability to Akhmediev breathers JF - Optics express N2 - The smooth transition between stable, Talbot-effect-dominated and modulationally unstable nonlinear optical beam propagation is described as the superposition of oscillating, growing and decaying eigenmodes of the common linearized theory of modulation instability. The saturation of the instability in form of breather maxima is embedded between eigenmode growth and decay. This explains well the changes of beam characteristics when the input intensity increases in experiments on modulation instability and breather excitation in spatial-spatial experimental platforms. An increased accuracy of instability gain measurements, a variety of interesting nonlinear beam scenarios and a more selective and well-directed breather excitation are demonstrated experimentally. KW - DYNAMICS KW - FIBER KW - GENERATION KW - PEREGRINE SOLITON KW - SPATIAL SOLITONS KW - WAVE-GUIDE Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-26049 N1 - Corresponding author: Roland Schiek VL - 29 IS - 10 SP - 15830 EP - 15851 PB - Optica Publishing Group CY - Washington, DC, USA ER - TY - JOUR A1 - Monkman, Gareth J. A1 - Striegl, Birgit A1 - Prem, Nina A1 - Sindersberger, Dirk T1 - Electrical Properties of Magnetoactive Boron‐Organo‐Silicon Oxide Polymers JF - Macromolecular Chemistry and Physics N2 - The electrical properties of rheopectic magnetoactive composites comprising boron-organo-silicon oxide dielectric matrices containing carbonyl iron microparticles are presented for the first time. The increase in interfacial magnetocapacitance is seen to greatly exceed that experienced when using conventional elastomeric matrices such as polydimethylsiloxane. In addition to the increase in capacitance, a simultaneous and sharp decrease in the parallel electrical resistance over several orders of magnitude is also observed. The effects are time dependent but repeatable. Potential applications include magnetically controlled frequency dependent devices, magnetic sensor systems, weighting elements for neural networks, etc. Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-26488 N1 - Corresponding author: Gareth J. Monkman VL - 221 IS - 4 SP - 1 EP - 8 PB - Wiley ER - TY - JOUR A1 - Prem, Nina A1 - Sindersberger, Dirk A1 - Monkman, Gareth J. T1 - Infrared spectral analysis of low concentration magnetoactive polymers JF - Journal of Applied Polymer Science N2 - This work concerns an area of magnetoactive polymer (MAP) research seldom considered. Traditionally only MAP with high concentrations of magnetic filler (typically between 10 and 90 wt%) have been investigated. This article deals with a hitherto neglected aspect of research, namely MAP containing lower magnetic filler concentrations (1 to 3 wt%). This article utilizes a range of spectroscopic analysis methods (Raman and FTIR) and their applicability to MAP characterization at wavelengths ranging from 2.5 to 25 mu m. Particular attention is paid to low carbonyl iron particle (CIP) concentrations in MAP for which the emergence of capillary doublets at a critical 2 wt% concentration is revealed. This results in measurable magnetic field-dependent changes in IR absorption at a wavelength of 4.255 mu m together with a detectable CO2 susceptibility. (c) 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 48366. KW - ELASTOMERS KW - magnetism and magnetic properties KW - sensors and actuators KW - spectroscopy Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-25913 SN - 1097-4628 N1 - Corresponding author: Nina Prem VL - 137 IS - 7 SP - 1 EP - 7 PB - Wiley ER - TY - JOUR A1 - Gärtner, Sebastian A1 - Marx-Schubach, Thomas A1 - Gaderer, Matthias A1 - Schmitz, Gerhard A1 - Sterner, Michael T1 - Techno-Economic Analysis of Carbon Dioxide Separation for an Innovative Energy Concept towards Low-Emission Glass Melting JF - energies N2 - The currently still high fossil energy demand is forcing the glass industry to search for innovative approaches for the reduction in CO2 emissions and the integration of renewable energy sources. In this paper, a novel power-to-methane concept is presented and discussed for this purpose. A special focus is on methods for the required CO2 capture from typical flue gases in the glass industry, which have hardly been explored to date. To close this research gap, process simulation models are developed to investigate post-combustion CO2 capture by absorption processes, followed by a techno-economic evaluation. Due to reduced flue gas volume, the designed CO2 capture plant is found to be much smaller (40 m3 absorber column volume) than absorption-based CO2 separation processes for power plants (12,560 m3 absorber column volume). As there are many options for waste heat utilization in the glass industry, the waste heat required for CO2 desorption can be generated in a particularly efficient and cost-effective way. The resulting CO2 separation costs range between 41 and 42 EUR/t CO2, depending on waste heat utilization for desorption. These costs are below the values of 50–65 EUR/t CO2 for comparable industrial applications. Despite these promising economic results, there are still some technical restrictions in terms of solvent degradation due to the high oxygen content in flue gas compositions. The results of this study point towards parametric studies for approaching these issues, such as the use of secondary and tertiary amines as solvents, or the optimization of operating conditions such as stripper pressure for further cost reductions potential. KW - economic evaluation KW - CO2-separation KW - glass industry KW - oxyfuel KW - methanation KW - power-to-gas Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-53627 N1 - Corresponding author: Sebastian Gärtner VL - 16 IS - 5 SP - 1 EP - 25 PB - MDPI CY - Basel ER - TY - JOUR A1 - Prem, Nina A1 - Sindersberger, Dirk A1 - Striegl, Birgit A1 - Böhm, Valter A1 - Monkman, Gareth J. T1 - Shape memory effects using magnetoactive Boron-organo-silicon oxide polymers JF - Macromolecular Chemistry and Physics N2 - Thermomechanical shape memory materials have certain disadvantages when it comes to 3D volumetric reproduction intended for rapid prototyping or robotic prehension. The need to constantly supply energy to counteract elastic retraction forces in order to maintain the required geometry, together with the inability to achieve conformal stability at elevated temperatures, limits the application of thermal shape memory polymers. Form removal also presents problems as most viscoelastic materials do not ensure demolding stability. This work demonstrates how magnetoactive boron−organo−silicon oxide polymers under the influence of an applied magnetic field can be used to achieve energy free sustainable volumetric shape memory effects over extended periods. The rheopectic properties of boron−organo−silicon oxide materials sustain form removal without mold distortion. Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-23205 N1 - Corresponding Author: Gareth J. Monkman VL - 221 IS - 15 SP - 1 EP - 8 PB - Wiley ER - TY - JOUR A1 - Maier, Robert A1 - Schlattl, Andreas A1 - Guess, Thomas A1 - Mottok, Jürgen T1 - CausalOps - Towards an industrial lifecycle for causal probabilistic graphical models JF - Information and Software Technology N2 - Context: Causal probabilistic graph-based models have gained widespread utility, enabling the modeling of cause-and-effect relationships across diverse domains. With their rising adoption in new areas, such as safety analysis of complex systems, software engineering, and machine learning, the need for an integrated lifecycle framework akin to DevOps and MLOps has emerged. Currently, such a reference for organizations interested in employing causal engineering is missing. This lack of guidance hinders the incorporation and maturation of causal methods in the context of real-life applications. Objective: This work contextualizes causal model usage across different stages and stakeholders and outlines a holistic view of creating and maintaining them within the process landscape of an organization. Method: A novel lifecycle framework for causal model development and application called CausalOps is proposed. By defining key entities, dependencies, and intermediate artifacts generated during causal engineering, a consistent vocabulary and workflow model to guide organizations in adopting causal methods are established. Results: Based on the early adoption of the discussed methodology to a real-life problem within the automotive domain, an experience report underlining the practicability and challenges of the proposed approach is discussed. Conclusion: It is concluded that besides current technical advancements in various aspects of causal engineering, an overarching lifecycle framework that integrates these methods into organizational practices is missing. Although diverse skills from adjacent disciplines are widely available, guidance on how to transfer these assets into causality-driven practices still need to be addressed in the published literature. CausalOps’ aim is to set a baseline for the adoption of causal methods in practical applications within interested organizations and the causality community. KW - Causal engineering KW - Model lifecycle KW - MLOps KW - Causal graphical models Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-73350 SN - 0950-5849 N1 - Corresponding author der OTH Regensburg: Robert Maier PB - Elsevier ER - TY - JOUR A1 - Bauer, Franz A1 - Sterner, Michael T1 - Impacts of lifestyle changes on energy demand and greenhouse gas emissions in Germany JF - Renewable and Sustainable Energy Reviews N2 - Most energy scenario studies typically focus on technological options and fuel substitution for decarbonising future energy systems. Lifestyle changes are rarely considered, although they can significantly reduce energy demand and climate change mitigation efforts. By using an energy system model, this study shows that it is possible to reduce final energy demand in Germany by 61 % in 2050 relative to 2019 levels, resulting in an annual per capita energy demand of 44 GJ for a representative country of the Global North. This goal can be achieved through a combination of technological measures and lifestyle changes without sacrificing a decent standard of living. Societal chances can eliminate reliance on not-yet-established negative emission technologies, reduce energy dependency, and reduce the need for energy-intensive hydrogen and e-fuels. Downsizing the energy system provides an opportunity for strengthening climate change mitigation, decrease material demand and reduce land use. KW - Climate change mitigation KW - Energy system modelling KW - Sufficiency KW - Lifestyle changes KW - Climate neutrality KW - Low energy demand KW - German climate targets Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-77682 SN - 1364-0321 N1 - Corresponding author der OTH Regensburg: Franz Bauer VL - 207 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Diermeier, Andreas A1 - Sindersberger, Dirk A1 - Krenkel, Lars A1 - Rosell, X. C. A1 - Monkman, Gareth J. T1 - Controllable Magnetoactive Polymer Conduit JF - The Open Mechanical Engineering Journal N2 - Objective: Magneto-active Polymers (MAP) are smart materials whose mechanical characteristics, such as elastic and shear moduli, may be controllable by means of an externally applied magnetic field. Methods: Various additives may be used to influence the characteristics of the polymer matrix whilst a suspension of soft and/or hard magnetic particles determine the magnetic properties of the composite. Both pre-cure and post-cure magnetization is possible. Results: A range of control strategies have been investigated for evaluation of the system using fluids of differing kinematic viscosity. Conclusion: Depending on the degree of magnetic field homogeneity, magneto-deformation and magnetostriction contribute to MAP actuation. This paper presents a novel application in the form of a peristaltic MAP tube system, applicable to flow control and pumping of hemorheological fluids in blood circulatory systems for biomedical research purposes. Y1 - 2018 UR - https://www.benthamopen.com/ABSTRACT/TOMEJ-12-192 N1 - Corresponding authro: Gareth J. Monkman VL - 12 IS - 1 SP - 192 EP - 200 PB - Bentham ER - TY - JOUR A1 - Kriegl, Raphael A1 - Krenkel, Lars A1 - Shamonin (Chamonine), Mikhail T1 - Preservation of wetting ridges using field-induced plasticity of magnetoactive elastomers JF - Journal of Colloid and Interface Science N2 - Hypothesis. The presence of a wetting ridge is crucial for many wetting phenomena on soft substrates. Conventional experimental observations of a wetting ridge require permanent presence of a droplet. The magnetic field-induced plasticity effect (FIPE) of soft magnetoative elastomers (MAEs) allows one to overcome this limitation. Depositing a droplet onto an MAE surface and applying a magnetic field fixes the wetting ridge in place due to the FIPE. The droplet can be removed to investigate the ridge with ease using conventional optical methods. Experiments. The wetting ridge is observed on MAEs with different shear moduli and different material thicknesses by confocal laser scanning microscopy (LSM). The preservation quality of the ridge is analyzed for several values of magnetic field from 10 mT to 270 mT. To verify the plausibilty of results obtained, the measured shape is compared to a theoretical model by Style & Dufresne. Findings. Upon removal of the sessile droplet, the deformation remains embossed onto the MAE surface as long as the magnetic field remains applied. The height of the ridge peak on soft samples (effective shear modulus kPa) is close to the theoretical prediction for a magnetic flux density of 50 mT. The magnitude of the external magnetic field magnifies the height of the wetting ridge. KW - Wetting ridge KW - Droplet KW - Magnetoactive elastomer KW - Magnetorheological elastomer KW - Field-induced plasticity KW - Confocal laser scanning microscopy Y1 - 2025 U6 - https://doi.org/10.1016/j.jcis.2024.12.132 SN - 0021-9797 N1 - Corresponding author der OTH Regensburg: Raphael Kriegl VL - 683 SP - 1019 EP - 1027 PB - Elsevier ER - TY - JOUR A1 - Loo, Xuyan A1 - Nagaraju, Bhavana A1 - Pathivada, Sai A1 - Bartsch, Alexander A1 - Schratzenstaller, Thomas A1 - Sattler, Robert A1 - Monkman, Gareth J. T1 - Electrical properties of bisphenol-A-free magnetoactive borosilicate polymers JF - AIP Advances N2 - The recent REACH regulations require the elimination of bisphenol-A and titanium dioxide from commercially available boron-based polymers. This has led to changes in some of the mechanical characteristics, which strongly influence the properties of magnetoactive borosilicate polymers. This work delivers results on the electrical properties and discusses some implications for future research using bisphenol-A and titanium-dioxide-free substitutes. KW - Electrical components KW - Electrical properties and parameters KW - Dielectric properties KW - Electrical resistivity KW - Magnetic materials KW - Viscoelasticity KW - Polymers KW - Non Newtonian fluids KW - Magnetic fluids Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-72936 SN - 2158-3226 N1 - Corresponding author der OTH Regensburg: Gareth J. Monkman VL - 14 IS - 5 PB - AIP Publishing ER - TY - JOUR A1 - Thema, Martin A1 - Weidlich, Tobias A1 - Hörl, Manuel A1 - Bellack, Annett A1 - Mörs, Friedemann A1 - Hackl, Florian A1 - Kohlmayer, Matthias A1 - Gleich, Jasmin A1 - Stabenau, Carsten A1 - Trabold, Thomas A1 - Neubert, Michael A1 - Ortloff, Felix A1 - Brotsack, Raimund A1 - Schmack, Doris A1 - Huber, Harald A1 - Hafenbradl, Doris A1 - Karl, Jürgen A1 - Sterner, Michael T1 - Biological CO2-Methanation: An Approach to Standardization JF - Energies N2 - Power-to-Methane as one part of Power-to-Gas has been recognized globally as one of the key elements for the transition towards a sustainable energy system. While plants that produce methane catalytically have been in operation for a long time, biological methanation has just reached industrial pilot scale and near-term commercial application. The growing importance of the biological method is reflected by an increasing number of scientific articles describing novel approaches to improve this technology. However, these studies are difficult to compare because they lack a coherent nomenclature. In this article, we present a comprehensive set of parameters allowing the characterization and comparison of various biological methanation processes. To identify relevant parameters needed for a proper description of this technology, we summarized existing literature and defined system boundaries for Power-to-Methane process steps. On this basis, we derive system parameters providing information on the methanation system, its performance, the biology and cost aspects. As a result, three different standards are provided as a blueprint matrix for use in academia and industry applicable to both, biological and catalytic methanation. Hence, this review attempts to set the standards for a comprehensive description of biological and chemical methanation processes. KW - Biological methanation KW - bubble column reactor KW - CO2-methanation KW - CSTR KW - membrane reactor KW - methanation KW - Power-to-Gas KW - Power-to-Methane KW - standardization KW - Trickle-bed reactor Y1 - 2019 U6 - https://doi.org/10.3390/en12091670 N1 - Corresponding author: Martin Thema VL - 12 IS - 9 SP - 1 EP - 32 PB - MDPI ER - TY - JOUR A1 - Snarskii, Andrei A. A1 - Kalita, Viktor M. A1 - Shamonin (Chamonine), Mikhail T1 - Renormalization of the critical exponent for the shear modulus of magnetoactive elastomers JF - Scientific Reports N2 - It is shown that the critical exponent for the effective shear modulus of a composite medium where a compliant polymer matrix is filled with ferromagnetic particles may significantly depend on the external magnetic field. The physical consequence of this dependence is the critical behavior of the relative magnetorheological effect. Y1 - 2018 U6 - https://doi.org/10.1038/s41598-018-22333-6 N1 - Corresponding author: Mikhail Shamonin VL - 8 SP - 1 EP - 8 PB - Nature ER - TY - JOUR A1 - Monkman, Gareth J. A1 - Sindersberger, Dirk A1 - Prem, Nina A1 - Diermeier, Andreas A1 - Szecsey, Tamara T1 - Dielectric behaviour of magnetic hybrid materials JF - Physical Sciences Reviews N2 - The objectives of this work include the analysis of electrical and magnetic properties of magneto-elastic hybrid materials with the intention of developing new techniques for sensor and actuator applications. This includes the investigation of dielectric properties at both low and high frequencies. The behaviour of capacitors whose dielectrics comprise magnetic hybrid materials is well known. Such interfacial magnetocapacitance can be varied according to magnetic content, magnetic flux density and the relative permittivity of the polymer matrix together with other dielectric content. The basic function of trapping electrical charges in polymers (electrets) is also established technology. However, the combination of magnetoactive polymers and electrets has led to the first electromagnetic device capable of adhering to almost any material, whether magnetically susceptible or not. During the course of this research, in addition to dielectrics, electrically conductive polymers based on (PDMS) matrices were developed in order to vary the electrical properties of the material in a targeted manner. In order to ensure repeatable results, this demanded new fabrication techniques hitherto unavailable. The 3D printing of silicones is far from being a mature technology and much pioneering work was necessary before extending the usual 3 d.o.f. to include orientation about and diffusion of particles in these three axes, thus leading to the concept of 6D printing. In 6D printing, the application of a magnetic field can be used during the curing process to control the particulate distribution and thus the spatial filler particle density as desired. Most of the devices (sensors and actuators) produced by such methods contain levels of carbonyl iron powder (CIP) embedded magnetic filler of up to 70 wt%. Contrary to this, a hitherto neglected research area, namely magnetoactive polymers (MAPs) having significantly lower magnetic particle concentrations (1 to 3 wt% CIP) were also investigated. With filler concentrations lower than 3 wt%, structures are formed which are completely absent at higher filler levels. CIP concentrations in the range of 1wt% demonstrate the formation of toroidal structures. Further development of coherent rings with a compact order results as filler concentrations increase towards 2 wt%. Above 3 wt% the structure eventually disintegrates to the usual random order found in traditional MAP with higher CIP content. Structured samples containing 1%–3 wt% CIP were investigated with the aid of X-ray tomography where solitary ring structures can be observed and eventually the formation of capillary doubles. Over wavelengths ranging from 1 to 25 µm, spectroscopic analysis of thin film MAP samples containing 2 wt% CIP revealed measurable magnetic-field-dependent changes in IR absorption at a wavenumber 2350 (λ = 4.255 µm). This was found to be due to the diamagnetic susceptibility of atmospheric carbon dioxide (CO2). Consequently, the first potential application for sparse matrix MAPs was found. KW - cappillary doublet KW - diamagnetic KW - elastomer dielectric KW - FTIR KW - interfacial magnetocapacitance KW - magnetoactive polymer KW - PDMS KW - toroid Y1 - 2021 U6 - https://doi.org/10.1515/psr-2019-0121 N1 - Corresponding author: Gareth J. Monkman VL - 7 IS - 10 SP - 1169 EP - 1185 PB - de Gruyter ER - TY - JOUR A1 - Prem, Nina A1 - Sindersberger, Dirk A1 - Monkman, Gareth J. T1 - Mini-Extruder for 3D Magnetoactive Polymer Printing JF - Advances in Materials Science and Engineering N2 - This work describes the development of a new miniature extruder, essential to cavity-free 3D printing of silicone-based smart materials. This makes the 3D printing of magnetoactive and electroactive polymer soft robotic components and devices directly from CAD data possible. The special feature of such an extruder is that it is designed for use with addition-crosslinking RTV-2 silicones, including solid particulate additives. The extruder merges the respective components automatically during extrusion which obviates the need for premixing and vacuum evacuation. Problems associated with inhomogeneities and unwanted cavity production are consequently eliminated. Rheological details necessary to the design, together with some preliminary performance results, are presented. Y1 - 2019 U6 - https://doi.org/10.1155/2019/8715718 N1 - Corresponding author: Gareth J. Monkman SP - 1 EP - 8 PB - HINDAWI ER - TY - JOUR A1 - Dechant, Eduard A1 - Fedulov, Feodor A1 - Fetisov, Leonid Y. A1 - Shamonin (Chamonine), Mikhail T1 - Bandwidth Widening of Piezoelectric Cantilever Beam Arrays by Mass-Tip Tuning for Low-Frequency Vibration Energy Harvesting JF - Applied Science N2 - Wireless sensor networks usually rely on internal permanent or rechargeable batteries as a power supply, causing high maintenance efforts. An alternative solution is to supply the entire system by harvesting the ambient energy, for example, by transducing ambient vibrations into electric energy by virtue of the piezoelectric effect. The purpose of this paper is to present a simple engineering approach for the bandwidth optimization of vibration energy harvesting systems comprising multiple piezoelectric cantilevers (PECs). The frequency tuning of a particular cantilever is achieved by changing the tip mass. It is shown that the bandwidth enhancement by mass tuning is limited and requires several PECs with close resonance frequencies. At a fixed frequency detuning between subsequent PECs, the achievable bandwidth shows a saturation behavior as a function of the number of cantilevers used. Since the resonance frequency of each PEC is different, the output voltages at a particular excitation frequency have different amplitudes and phases. A simple power-transfer circuit where several PECs with an individual full wave bridge rectifier are connected in parallel allows one to extract the electrical power close to the theoretical maximum excluding the diode losses. The experiments performed on two- and three-PEC arrays show reasonable agreement with simulations and demonstrate that this power-transfer circuit additionally influences the frequency dependence of the harvested electrical power. KW - array KW - BAND-PASS FILTERS KW - bandwidth KW - BIMORPH KW - Optimization KW - OUTPUT KW - PERFORMANCE KW - piezoelectric cantilever KW - POWER KW - vibration energy harvesting Y1 - 2017 U6 - https://doi.org/10.3390/app7121324 N1 - Corresponding Author: Mikhail Shamonin VL - 7 IS - 12 PB - MDPI ER - TY - JOUR A1 - Kreitmeier, Florian A1 - Chashin, Dmitri V. A1 - Fetisov, Yuri K. A1 - Fetisov, Leonid Y. A1 - Schulz, Irene A1 - Monkman, Gareth J. A1 - Shamonin (Chamonine), Mikhail T1 - Nonlinear Magnetoelectric Response of Planar Ferromagnetic-Piezoelectric Structures to Sub-Millisecond Magnetic Pulses JF - Sensors N2 - The magnetoelectric response of bi- and symmetric trilayer composite structures to pulsed magnetic fields is experimentally investigated in detail. The structures comprise layers of commercially available piezoelectric (lead zirconate titanate) and magnetostrictive (permendur or nickel) materials. The magnetic-field pulses have the form of a half-wave sine function with duration of 450 µs and amplitudes ranging from 500 Oe to 38 kOe. The time dependence of the resulting voltage is presented and explained by theoretical estimations. Appearance of voltage oscillations with frequencies much larger than the reciprocal pulse length is observed for sufficiently large amplitudes (~1-10 kOe) of the magnetic-field pulse. The origin of these oscillations is the excitation of bending and planar acoustic oscillations in the structures. Dependencies of the magnetoelectric voltage coefficient on the excitation frequency and the applied magnetic field are calculated by digital signal processing and compared with those obtained by the method of harmonic field modulation. The results are of interest for developing magnetoelectric sensors of pulsed magnetic fields as well as for rapid characterization of magnetoelectric composite structures. Y1 - 2012 U6 - https://doi.org/10.3390/s121114821 N1 - Corresponding author: Mikhail Shamonin VL - 12 IS - 11 SP - 14821 EP - 14837 PB - MDPI CY - Basel ER - TY - JOUR A1 - Apelsmeier, Andreas A1 - Gleixner, Ramona A1 - Mayer, Matthias A1 - Shamonin (Chamonine), Mikhail A1 - Schmauss, Bernhard T1 - Intensity referencing in an extrinsic optical fiber temperature sensor JF - Procedia Engineering N2 - Optical fiber sensors based on intensity measurement require some form of intensity referencing to avoid errors arising from parasitic losses. Known techniques of referencing such as balanced bridge, divided beam systems or two-wavelength referencing are not suitable for low-cost applications since they use relatively complicated optical components such as multiple LED sources, couplers, filters etc. In this work a novel method of referencing in an extrinsic optical fiber sensor system utilizing temperature dependence of absorption edge in a semiconductor crystal is described. The sensor system comprises a single LED source and no optical fiber junctions. The emission spectrum of an LED depends on its temperature. The reference is provided by controlling the temperature of an LED source and transmission measurements with different emission spectra. The entire process is controlled by a microprocessor unit. Performance of a sensor system is investigated and it is shown that the losses in connectors may be compensated for. KW - Extrinsic optical fiber sensor KW - Intensity referencing KW - Temperature measurement KW - Absorption edge KW - Semiconductor KW - Hot-spot measurement Y1 - 2010 U6 - https://doi.org/10.1016/j.proeng.2010.09.301 VL - 5 SP - 1095 EP - 1098 PB - Elsevier ER - TY - JOUR A1 - Monkman, Gareth J. A1 - Sindersberger, Dirk A1 - Prem, Nina A1 - Szecsey, Tamara T1 - Smart Stiction JF - Robotics & Automation Engineering Journal N2 - Soft robotics could loosely be described as the engineering science of expanded dexterity through controllable flexibility. The exploitation of controllable compliance through the judicious choice of soft flexible members, as opposed to a finite number of rigid kinematic joints, can result in greater dexterity without compromising simplicity. One example is the replacement of segmented mechanical legs with simple compliant material eruciform prolegs. To achieve this in robotics, without introducing additional mechanical joints, mobile surfaces with switchable coefficients of friction is essential. This paper explains how, using silicone based smart materials, the rapid alternation between kinematic and static friction (stiction) may be achieved. Y1 - 2019 U6 - https://doi.org/10.19080/RAEJ.2019.04.555641 N1 - Corresponding author: Gareth J. Monkman VL - 4 IS - 4 PB - Juniper Publishers ER - TY - JOUR A1 - Schiek, Roland T1 - Nonlinear refractive index in silica glass JF - Optical Materials Expres N2 - The third-order nonlinear susceptibility of silica glass is measured via self-phase modulation in standard single mode fibers at a wavelength of 1550 nm. To minimize the influence of polarization state changes along the propagation only meter-long fibers were investigated. With pulse durations of picoseconds a quasi-instantaneous nonlinearity with ultrafast electronic and fast nuclear-vibration contributions produces under conditions of negligible dispersion a classic and clean nonlinear phase shift following exactly the shape of the pulse power. The complex pulse envelope was retrieved from frequency optical gating spectrograms. The nonlinear fiber parameter γ could be determined with an accuracy of 3.7 percent. Considering the mode field structure and the doping influence the nonlinear refractive index of silica glass as the fiber base material was found to be n 2 =2.22⋅10 −16 cm 2 W±6.0% for picosecond-long pulses. Comparing nonlinear phase shifts from linear and circular polarized light a nuclear-vibration contribution to the cubic fiber nonlinearity of 25 percent was estimated. Y1 - 2023 U6 - https://doi.org/10.1364/ome.489520 N1 - Corresponding author: Roland Schiek VL - 13 IS - 6 SP - 1727 EP - 1740 PB - Optica ER - TY - JOUR A1 - Sindersberger, Dirk A1 - Prem, Nina A1 - Monkman, Gareth J. T1 - Structure formation in low concentration magnetoactive polymers JF - AIP advances N2 - This paper concerns recent research into the autonomous formation of micro-structures in low carbonyl iron powder (CIP) concentration magneto active polymers (MAP). Higher concentrations of CIP show an isotropic distribution of magnetic filler throughout the entire sample, while autonomous structure formation is possible at mass concentrations lower than 3%. The formation of micro-toroids commences as CIP concentration approaches 1% wt. Further development of coherent rings with a defined order follow as CIP concentrations increase toward 2% wt, whilst exceeding 3% wt leads to the same isotropic distribution found in higher concentration MAP. Structured samples containing between 1% wt and 3% wt CIP were investigated using X-Ray tomography where solitary structures could clearly be observed. The ring structures represent microinductivities whose geometries can be manipulated during fabrication. In addition, these structures are magnetic field sensitive. This is not only relevant to applications in the GHz and THz areas but recent research has revealed implications for optical, thermal, acoustic and even chemical MAP sensors. (C) 2019 Author(s). Y1 - 2019 U6 - https://doi.org/10.1063/1.5079997 N1 - Corresponding author: Dirk Sindersberger VL - 9 IS - 3 PB - AIP Publishing ER - TY - JOUR A1 - Sterner, Michael A1 - Bauer, Franz T1 - Power-to-X im Kontext der Energiewende und des Klimaschutzes in Deutschland JF - Chemie-Ingenieur-Technik N2 - Um den Einfluss verschiedener Power-to-X-Verfahren auf die Transformation des deutschen Energiesystems und das Erreichen der Klimaschutzziele zu überprüfen, wurde ein sektorübergreifendes Energiesystemmodel entwickelt. Die daraus gewonnenen Ergebnisse zeigen: Für eine erfolgreiche Energiewende ist der Einsatz von Power-to-X in Zukunft unverzichtbar. Vor allem in Bereichen und Sektoren, in denen hohe Energiedichten erforderlich und nur wenig andere Optionen zur Defossilisierung vorhanden sind, werden Power-to-X-Technologien zwingend notwendig. T2 - Power-to-X in Context of Energy Transition and Climate Change Mitigation in Germany KW - Power-to-Gas KW - Climate mitigation KW - Energy system KW - Modeling KW - Power-to-X KW - Klimaschutz KW - Energiewende Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-11669 SN - 0009-286X N1 - Corresponding author: Franz Bauer VL - 92 IS - 1-2 SP - 85 EP - 90 PB - Wiley ER - TY - JOUR A1 - Thema, Martin A1 - Bauer, Franz A1 - Sterner, Michael T1 - Power-to-Gas: Electrolysis and methanation status review JF - Renewable and Sustainable Energy Reviews N2 - This review gives a worldwide overview on Power-to-Gas projects producing hydrogen or renewable substitute natural gas focusing projects in central Europe. It deepens and completes the content of previous reviews by including hitherto unreviewed projects and by combining project names with details such as plant location. It is based on data from 153 completed, recent and planned projects since 1988 which were evaluated with regards to plant allocation, installed power development, plant size, shares and amounts of hydrogen or substitute natural gas producing examinations and product utilization phases. Cost development for electrolysis and carbon dioxide methanation was analyzed and a projection until 2030 is given with an outlook to 2050. The results show substantial cost reductions for electrolysis as well as for methanation during the recent years and a further price decline to less than 500 euro per kilowatt electric power input for both technologies until 2050 is estimated if cost projection follows the current trend. Most of the projects examined are located in Germany, Denmark, the United States of America and Canada. Following an exponential global trend to increase installed power, today's Power-to-Gas applications are operated at about 39 megawatt. Hydrogen and substitute natural gas were investigated on equal terms concerning the number of projects. KW - Biological CO2-Methanation KW - Chemical CO2-Methanation KW - Cost-development KW - Electrolysis KW - Power-to-Gas Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-26238 N1 - Corresponding author: Martin Thema VL - 112 IS - 7 SP - 775 EP - 787 PB - Elsevier ER - TY - JOUR A1 - Sterner, Michael A1 - Hofrichter, Andreas A1 - Meisinger, Alexander A1 - Bauer, Franz A1 - Pinkwart, Karsten A1 - Maletzko, Annabelle A1 - Dittmar, Felix A1 - Cremers, Carsten T1 - 19 Import options for green hydrogen and derivatives - An overview of efficiencies and technology readiness levels JF - International Journal of Hydrogen Energy N2 - The import of hydrogen and derivatives forms part of many national strategies and is fundamental to achieving climate protection targets. This paper provides an overview and technical comparison of import pathways for hydrogen and derivatives in terms of efficiency, technological maturity and development and construction times with a focus on the period up to 2030. The import of hydrogen via pipeline has the highest system efficiency at 57-67 % and the highest technological maturity with a technology readiness level (TRL) of 8-9. The import of ammonia and methanol via ship and of SNG via pipeline shows efficiencies in the range of 39-64 % and a technological maturity of TRL 7 to 9 when using point sources. Liquid hydrogen, LOHC and Fischer-Tropsch products have the lowest efficiency and TRL in comparison. The use of direct air capture (DAC) reduces efficiency and TRL considerably. Reconversion of the derivatives to hydrogen is also associated with high losses and is not achievable for all technologies on an industrial scale up to 2030. In the short to medium term, import routes for derivatives that can utilise existing infrastructures and mature technologies are the most promising for imports. In the long term, the most promising option is hydrogen via pipelines. KW - Hydrogen KW - Derivatives KW - Power-to-X KW - Efficiency KW - TRL KW - Construction time KW - Technical assessment KW - Import KW - Hydrogen strategy KW - Energy system modelling Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-77756 SN - 0360-3199 N1 - Corresponding author der OTH Regensburg: Michael Sterner VL - 90 SP - 1112 EP - 1127 PB - Elsevier ER - TY - JOUR A1 - Kovalev, Alexander A1 - Belyaeva, Inna A. A1 - von Hofen, Christian A1 - Gorb, Stanislav A1 - Shamonin (Chamonine), Mikhail T1 - Magnetically Switchable Adhesion and Friction of Soft Magnetoactive Elastomers JF - Advanced Engineering Materials N2 - Herein, the effect of an applied moderate (~240 mT) magnetic field on the work of adhesion (WoA) of mechanically soft (the shear modulus ~10 kPa) magnetoactive elastomer (MAE) samples with two different mass fractions (70 and 80 wt%) of carbonyl iron powder (CIP) is concerned. The unfilled elastomer sample is used for comparison. Due to some sedimentation of filling particles, the concentration of inclusions in thin (~10 μm) subsurface layers is different. It is shown that the WoA increases (up to 1.8-fold) on the particle-enriched side (PES) in the magnetic field and its value is higher for higher filler concentration. On the particle-depleted side (PDS), WoA does not depend on particle concentration and on the magnetic field. Adhesion and friction are coupled in MAEs. No statistically significant difference in the friction coefficient, determined from the extended Amontons´ law, depending on sample side, CIP concentration, or presence of magnetic field is found. However, the PDS in the magnetic field demonstrates significantly higher critical shear stress compared to that for the PES or PDS in the absence of magnetic field. Correlations between different surface properties are discussed. Obtained results are useful for the development of magnetically controllable soft robots. Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-45283 N1 - Corresponding authors: Stanislav Gorb und Mikhail Shamonin VL - 24 IS - 10 SP - 1 EP - 8 PB - WILEY-VCH ER - TY - JOUR A1 - Glavan, Gašper A1 - Belyaeva, Inna A. A1 - Shamonin (Chamonine), Mikhail T1 - On the Piezomagnetism of Magnetoactive Elastomeric Cylinders in Uniform Magnetic Fields: Height Modulation in the Vicinity of an Operating Point by Time-Harmonic Fields JF - Polymers N2 - Soft magnetoactive elastomers (MAEs) are currently considered to be promising materials for actuators in soft robotics. Magnetically controlled actuators often operate in the vicinity of a bias point. Their dynamic properties can be characterized by the piezomagnetic strain coefficient, which is a ratio of the time-harmonic strain amplitude to the corresponding magnetic field strength. Herein, the dynamic strain response of a family of MAE cylinders to the time-harmonic (frequency of 0.1-2.5 Hz) magnetic fields of varying amplitude (12.5 kA/m-62.5 kA/m), superimposed on different bias magnetic fields (25-127 kA/m), is systematically investigated for the first time. Strain measurements are based on optical imaging with sub-pixel resolution. It is found that the dynamic strain response of MAEs is considerably different from that in conventional magnetostrictive polymer composites (MPCs), and it cannot be described by the effective piezomagnetic constant from the quasi-static measurements. The obtained maximum values of the piezomagnetic strain coefficient (∼102 nm/A) are one to two orders of magnitude higher than in conventional MPCs, but there is a significant phase lag (35-60°) in the magnetostrictive response with respect to an alternating magnetic field. The experimental dependencies of the characteristics of the alternating strain on the amplitude of the alternating field, bias field, oscillation frequency, and aspect ratio of cylinders are given for several representative examples. It is hypothesized that the main cause of observed peculiarities is the non-linear viscoelasticity of these composite materials. Y1 - 2024 U6 - https://doi.org/10.3390/polym16192706 N1 - Corresponding author der OTH Regensburg: Gašper Glavan VL - 16 IS - 19 ER - TY - JOUR A1 - Glavan, Gašper A1 - Kettl, Wolfgang A1 - Brunhuber, Alexander A1 - Shamonin (Chamonine), Mikhail A1 - Drevenšek‐Olenik, Irena T1 - Effect of Material Composition on Tunable Surface Roughness of Magnetoactive Elastomers JF - Polymers N2 - We investigated magnetic-field-induced modifications of the surface roughness of magnetoactive elastomers (MAEs) with four material compositions incorporating two concentrations of ferromagnetic microparticles (70 wt% and 80 wt%) and exhibiting two shear storage moduli of the resulting composite material (about 10 kPa and 30 kPa). The analysis was primarily based on spread optical reflection measurements. The surfaces of all four materials were found to be very smooth in the absence of magnetic field (RMS roughness below 50 nm). A maximal field-induced roughness modification (approximately 1 m/T) was observed for the softer material with the lower filler concentration, and a minimal modification (less than 50 nm/T) was observed for the harder material with the higher filler concentration. All four materials showed a significant decrease in the total optical reflectivity with an increasing magnetic field as well. This effect is attributed to the existence of a distinct surface layer that is depleted of microparticles in the absence of a magnetic field but becomes filled with particles in the presence of the field. We analyzed the temporal response of the reflective properties to the switching on and off of the magnetic field and found switching-on response times of around 0.1 s and switching-off response times in the range of 0.3-0.6 s. These observations provide new insight into the magnetic-field-induced surface restructuring of MAEs and may be useful for the development of magnetically reconfigurable elastomeric optical surfaces. KW - magnetically tunable surface reflectivity KW - magnetically tunable surface roughness KW - magnetorheological elastomer KW - magnetorheological polymers KW - surface properties Y1 - 2019 U6 - https://doi.org/10.3390/polym11040594 N1 - Corresponding author: Gašper Glavan VL - 11 IS - 4 SP - 1 EP - 13 PB - MDPI CY - Basel ER - TY - JOUR A1 - Kravanja, Gaia A1 - Belyaeva, Inna A. A1 - Hribar, Luka A1 - Drevenšek‐Olenik, Irena A1 - Jezeršek, Matija A1 - Shamonin (Chamonine), Mikhail T1 - Tunable Drop Splashing on Magnetoactive Elastomers JF - Advanced Materials Interfaces N2 - The significant effect of an external dc magnetic field on the splashing behavior of ethanol drops impacting on the unstructured (flat) surface of soft magnetoactive elastomers (MAEs) is reported. The Weber number corresponding to the transition between the deposition and the splashing regime is reduced by ≈20% in a moderate magnetic field of ≈300 mT. Alongside this effect, a two-fold increase of the initial deceleration of the ejection sheet is observed for the softest sample. The main underlying mechanism for the observed phenomena is believed to be the magnetic-field-induced stiffening of the MAEs. Further possible mechanisms are magnetically induced changes in the surface roughness and magnetic-field-induced plasticity (magnetic shape memory effect). The potential application areas are magnetically regulable wetting and magneto-responsive surfaces for controlling the drop splashing. Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-24504 N1 - Corresponding author: Mikhail Shamonin VL - 8 IS - 11 SP - 1 EP - 7 PB - Wiley ER - TY - GEN A1 - Kriegl, Raphael A1 - Kravanja, Gaia A1 - Hribar, Luka A1 - Jezeršek, Matija A1 - Drevenšek‐Olenik, Irena A1 - Shamonin (Chamonine), Mikhail T1 - Characterization of Wetting Properties of Magnetoactive Elastomer Surfaces T2 - Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS) - 2023, September 11–13, 2023 Austin, Texas, USA N2 - Commercially available contact angle (CA) measuring devices usually do not allow for the application of magnetic fields to the sample under test. A setup for measuring the CA of liquids on magnetosensitive surfaces has been developed specifically for investigating the surfaces of magnetoactive elastomers (MAEs). The addition of a programmable linear stage, which moves a permanent magnet, allows for fine control of the magnetic field applied to the MAE without the need for large and power-consuming electromagnets. Paired with a custom control and evaluation software, this measurement setup operates semiautomatically, limiting operator error and increasing precision, speed, as well as repeatability of static and dynamic CA measurements for different magnetoactive materials. The software is equipped with robust droplet fitting algorithms to avoid experimental challenges arising with soft magnetoactive materials, such as the curling of sample edges or diffuse non-reflective surfaces. Several application examples on MAE surfaces, both processed and unprocessed, are presented. KW - magnetoactive elastomers KW - image processing KW - droplet contour fitting KW - contact angle Y1 - 2023 SN - 978-0-7918-8752-3 U6 - https://doi.org/10.1115/SMASIS2023-110998 N1 - Corresponding author: Raphael Kriegl PB - The American Society of Mechanical Engineers CY - New York, USA ER - TY - JOUR A1 - Kriegl, Raphael A1 - Kravanja, Gaia A1 - Hribar, Luka A1 - Čoga, Lucija A1 - Drevenšek‐Olenik, Irena A1 - Jezeršek, Matija A1 - Kalin, Mitjan A1 - Shamonin (Chamonine), Mikhail T1 - Microstructured Magnetoactive Elastomers for Switchable Wettability JF - Polymers N2 - We demonstrate the control of wettability of non-structured and microstructured magnetoactive elastomers (MAEs) by magnetic field. The synthesized composite materials have a concentration of carbonyl iron particles of 75 wt.% (≈27 vol.%) and three different stiffnesses of the elastomer matrix. A new method of fabrication of MAE coatings on plastic substrates is presented, which allows one to enhance the response of the apparent contact angle to the magnetic field by exposing the particle-enriched side of MAEs to water. A magnetic field is not applied during crosslinking. The highest variation of the contact angle from (113 ± 1)° in zero field up to (156 ± 2)° at about 400 mT is achieved in the MAE sample with the softest matrix. Several lamellar and pillared MAE structures are fabricated by laser micromachining. The lateral dimension of surface structures is about 50 µm and the depth varies between 3 µm and 60 µm. A systematic investigation of the effects of parameters of laser processing (laser power and the number of passages of the laser beam) on the wetting behavior of these structures in the absence and presence of a magnetic field is performed. In particular, strong anisotropy of the wetting behavior of lamellar structures is observed. The results are qualitatively discussed in the framework of the Wenzel and Cassie-Baxter models. Finally, directions of further research on magnetically controlled wettability of microstructured MAE surfaces are outlined. The obtained results may be useful for the development of magnetically controlled smart surfaces for droplet-based microfluidics. Y1 - 2022 U6 - https://doi.org/10.3390/polym14183883 N1 - Corresponding authors: Raphael Kriegl und Mikhail Shamonin VL - 14 IS - 18 SP - 1 EP - 21 PB - MDPI ER - TY - JOUR A1 - Rauch, Johannes A1 - Brückl, Oliver T1 - Achieving Optimal Reactive Power Compensation in Distribution Grids by Using Industrial Compensation Systems JF - Electricity N2 - This paper presents a method for integrating industrial consumers owning compensation systems as alternative reactive power sources into grid operating processes. In remuneration, they receive a market-based provision of reactive power. The aim is to analyze the potential of reactive power compensation systems of industrial companies connected to medium-voltage (10 kV–30 kV) AC grids in order to increase the reactive power ability of distribution grids. Measurement methods and reactive power potential results of six industrial companies are presented to characterize the amount and temporal availability of their reactive power potential. The presented approach for using the decentralized reactive power potential is a centralized reactive power control method and is based on optimal power flow (OPF) calculations. An optimization algorithm based on linear programming is used to coordinate a reactive power retrieval tuned to the actual demand. The influencing quantities are the current grid status (voltage and load flow capacity reserves at grid nodes and power lines) and the current reactive power potential of the reactive power sources. The compensation impact of six measured industrial companies on an exemplary medium-voltage grid is shown by an application example. KW - Blindleistung KW - Blindleistungsmanagement KW - Industriebetriebe KW - Optimal Power Flow KW - Reactive Power Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-59139 N1 - Corresponding author: Johannes Rauch VL - 4 IS - 1 SP - 78 EP - 95 PB - MDPI CY - Basel ER - TY - JOUR A1 - Röhrl, Simon A1 - Staufer, Susanne A1 - Bugert, Flemming A1 - Nadimpalli, Vamsi Krishna A1 - Hauser, Florian A1 - Grabinger, Lisa A1 - Bittner, Dominik A1 - Ezer, Timur A1 - Altweck, Ricardo A1 - Graf, Sabine A1 - Kriza, Thomas A1 - Mottok, Jürgen T1 - Ethical Considerations of AI in Education: A Case Study based on Pythia Learning Enhancement System JF - IEEE Access N2 - As the use of AI in education increases, addressing ethical concerns is essential for its responsible use and implementation. This study explores the ethical considerations of AI in education by analyzing a concrete application, the Pythia Learning Enhancement System, which enables personalized and adaptive educational experiences. In this case study, the concrete implementation of Pythia, contrary to high-level abstract analyses, provides practical insights into these ethical issues. To achieve this goal, we first define Pythia and outline its implementation. Using the various topics covered by Pythia, the ethical issues associated with each of these topics are outlined, resulting in a list of ten distinct ethical issues. Because there is overlap in issues covered by similar applications, they can benefit from this identification. An ethical (human rights) and didactic (constructivism) theoretical background is then provided as a basis for further discussion. This is used to build the arguments used in the main study. This consists of analyzing each of the issues and providing recommendations to mitigate potential harm arising from these issues. This helps to provide guidelines for future applications. In the analysis, the ethical discussion is mainly based on the human rights of the stakeholders involved, emphasizing human dignity. After the analysis, each of the issues is contextualized with the recent AI Act of the European Union, providing a novel mapping of the issues of AI in education to the AI Act. Finally, the limitations of the study are stated and a plan for future research is presented. KW - Ethics KW - Artificial intelligence KW - Education KW - Stakeholders KW - Psychology KW - Privacy KW - Search problems KW - Guidelines KW - Focusing KW - Europe Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-83403 SN - 2169-3536 N1 - Corresponding author der OTH Regensburg: Simon Röhrl VL - 11 SP - 1 EP - 25 PB - Institute of Electrical and Electronics Engineers (IEEE) ER - TY - JOUR A1 - Gärtner, Sebastian A1 - Rank, Daniel A1 - Heberl, Michael A1 - Gaderer, Matthias A1 - Dawoud, Belal A1 - Haumer, Anton A1 - Sterner, Michael T1 - Simulation and Techno-Economic Analysis of a Power-to-Hydrogen Process for Oxyfuel Glass Melting JF - Energies N2 - As an energy-intensive industry sector, the glass industry is strongly affected by the increasingly stringent climate protection targets. As established combustion-based production systems ensure high process stability and glass quality, an immediate switch to low greenhouse gas emission processes is difficult. To approach these challenges, this work investigates a step-by-step integration of a Power-to-Hydrogen concept into established oxyfuel glass melting processes using a simulation approach. This is complemented by a case study for economic analysis on a selected German glass industry site by simulating the power production of a nearby renewable energy park and subsequent optimization of the power-to-hydrogen plant performance and capacities. The results of this study indicate, that the proposed system can reduce specific carbon dioxide emissions by up to 60%, while increasing specific energy demand by a maximum of 25%. Investigations of the impact of altered combustion and furnace properties like adiabatic flame temperature (+25 °C), temperature efficiency (∆ξ = −0.003) and heat capacity flow ratio (∆zHL = −0.009) indicate that pure hydrogen-oxygen combustion has less impact on melting properties than assumed so far. Within the case study, high CO2 abatement costs of 295 €/t CO2-eq. were determined. This is mainly due to the insufficient performance of renewable energy sources. The correlations between process scaling and economic parameters presented in this study show promising potential for further economic optimization of the proposed energy system in the future. KW - Power-to-Gas KW - Hydrogen KW - Electrolysis KW - Oxyfuel KW - Glass Industry Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-22713 N1 - Corresponding author: Sebastian Gärtner VL - 14 IS - 24 PB - MDPI ER - TY - JOUR A1 - Hofrichter, Andreas A1 - Rank, Daniel A1 - Heberl, Michael A1 - Sterner, Michael T1 - Determination of the optimal power ratio between electrolysis and renewable energy to investigate the effects on the hydrogen production costs JF - International Journal of Hydrogen Energy N2 - Green hydrogen via renewable powered electrolysis has a high relevance in decarbonization and supply security. Achieving economically competitive hydrogen production costs is a major challenge in times of an energy price crisis. Our objective is to show the economically optimal installed capacity of electrolysers in relation to wind and solar power so swift and credible statements can be made regarding the system design. The ratio between renewable generation and electrolysis power as well as scaling effects, operating behaviour and development of costs are considered. Hydrogen production costs are calculated for four exemplary real PV and wind sites and different ratios of electrolysis to renewable power for the year 2020. The ideal ratio for PV systems is between 14% and 73% and for wind between 3.3% and 143% for low and high full load hours. The lowest hydrogen production costs are identified at 2.53 €/kg for 50 MW wind power and 72 MW electrolysis power. The results provide plant constructors the possibility to create a cost-optimized design via an optimum ratio of electrolysis to renewable capacity. Therefore, the procedures for planning and dimensioning of selected systems can be drastically simplified. Y1 - 2023 U6 - https://doi.org/10.1016/j.ijhydene.2022.09.263 SN - 0360-3199 N1 - Corresponding author: Michael Heberl N1 - Corrigendum to “Determination of the optimal power ratio between electrolysis and renewable energy to investigate the effects on the hydrogen production costs” [Int J Hydrogen Energy 48 (5) (2023) 1651–1663] - https://doi.org/10.1016/j.ijhydene.2023.03.128 VL - 48 IS - 5 SP - 1651 EP - 1663 PB - Elsevier ER - TY - JOUR A1 - Savelev, Dmitrii V. A1 - Glavan, Gašper A1 - Belan, Viktoria O. A1 - Belyaeva, Inna A. A1 - Fetisov, Leonid Y. A1 - Shamonin (Chamonine), Mikhail T1 - Resonant Magnetoelectric Effect at Low Frequencies in Layered Polymeric Cantilevers Containing a Magnetoactive Elastomer JF - Applied Sciences N2 - In this work, the resonance enhancement of magnetoelectric (ME) coupling at the two lowest bending resonance frequencies was investigated in layered cantilever structures comprising a magnetoactive elastomer (MAE) slab and a commercially available piezoelectric polymer multilayer. A cantilever was fixed at one end in the horizontal plane and the magnetic field was applied horizontally. Five composite structures, each containing an MAE layer of different thicknesses from 0.85 to 4 mm, were fabricated. The fundamental bending resonance frequency in the absence of a magnetic field varied between roughly 23 and 55 Hz. It decreased with the increasing thickness of the MAE layer, which was explained by a simple theory. The largest ME voltage coefficient of about 7.85 V/A was measured in a sample where the thickness of the MAE layer was ≈2 mm. A significant increase in the bending resonance frequencies in the applied DC magnetic field of 240 kA/m up to 200% was observed. The results were compared with alternative designs for layered multiferroic structures. Directions for future research were also discussed. KW - flexible composite KW - low frequency KW - magnetoactive elastomer KW - magnetoelectric effect KW - piezoelectric polymer Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-30637 N1 - corresponding authors: Dmitry V. Saveliev and Mikhail Shamonin VL - 12 IS - 4 SP - 1 EP - 13 PB - MPDI ER - TY - JOUR A1 - Fetisov, Yuri K. A1 - Chashin, Dmitri V. A1 - Savelev, Dmitrii V. A1 - Fetisov, Leonid Y. A1 - Shamonin (Chamonine), Mikhail T1 - Anisotropic Magnetoelectric Effect in a Planar Heterostructure Comprising Piezoelectric Ceramics and Magnetostrictive Fibrous Composite JF - Materials N2 - The direct magnetoelectric (ME) effect is investigated in a planar structure comprising mechanically coupled layers of a magnetostrictive fibrous composite (MFC) and a piezoelectric ceramics (lead zirconate titanate, PZT). The MFC is an array of Ni-wires with a diameter of 200 mu m that are aligned parallel to each other in a single layer. The wires are separated by a distance of 250 or 500 mu m and fixed in a polyamide matrix. The structure was placed in a tangential constant field H and was excited by an alternating magnetic field h parallel to H, while the voltage generated by the PZT layer was measured. The resulting field dependences of the magnetization M(H) and the magnetostriction lambda(H) were determined by the orientation of the field H in the plane of the structure and the distance between the Ni-wires. The ME coupling coefficient of the structure decreased from 4.8 to 0.25 V/A when the orientation of H was changed from parallel to perpendicular to Ni-wires. With an increase in the excitation field amplitude h, a nonlinear ME effect in the output voltage, namely frequency doubling, was observed. The frequency and field dependences of the efficiency of the ME transduction in the MFC-piezoelectric heterostructure are well described by the existing theory. KW - composite KW - frequency doubling KW - heterostructure KW - magnetoelectric effect KW - magnetostrictive fiber KW - piezoelectric ceramic material Y1 - 2019 U6 - https://doi.org/10.3390/ma12193228 N1 - Corresponding authors: Yuri Fetisov, Mikhail Shamonin VL - 12 IS - 19 SP - 1 EP - 13 PB - MDPI CY - Basel ER - TY - JOUR A1 - Glavan, Gašper A1 - Belyaeva, Inna A. A1 - Ruwisch, Kevin A1 - Wollschlaeger, Joachim A1 - Shamonin (Chamonine), Mikhail T1 - Magnetoelectric Response of Laminated Cantilevers Comprising a Magnetoactive Elastomer and a Piezoelectric Polymer, in Pulsed Uniform Magnetic Fields JF - Sensors N2 - The voltage response to pulsed uniform magnetic fields and the accompanying bending deformations of laminated cantilever structures are investigated experimentally in detail. The structures comprise a magnetoactive elastomer (MAE) slab and a commercially available piezoelectric polymer multilayer. The magnetic field is applied vertically and the laminated structures are customarily fixed in the horizontal plane or, alternatively, slightly tilted upwards or downwards. Six different MAE compositions incorporating three concentrations of carbonyl iron particles (70 wt%, 75 wt% and 80 wt%) and two elastomer matrices of different stiffness are used. The dependences of the generated voltage and the cantilever's deflection on the composition of the MAE layer and its thickness are obtained. The appearance of the voltage between the electrodes of a piezoelectric material upon application of a magnetic field is considered as a manifestation of the direct magnetoelectric (ME) effect in a composite laminated structure. The ME voltage response increases with the increasing total quantity of the soft-magnetic filler in the MAE layer. The relationship between the generated voltage and the cantilever's deflection is established. The highest observed peak voltage around 5.5 V is about 8.5-fold higher than previously reported values. The quasi-static ME voltage coefficient for this type of ME heterostructures is about 50 V/A in the magnetic field of approximate to 100 kA/m, obtained for the first time. The results could be useful for the development of magnetic field sensors and energy harvesting devices relying on these novel polymer composites. KW - cantilever KW - composites KW - DEMAGNETIZING FACTORS KW - direct magnetoelectric effect KW - laminated structure KW - magnetic field sensor KW - magnetoactive elastomer KW - piezoelectric polymer Y1 - 2021 U6 - https://doi.org/10.3390/s21196390 N1 - Corresponding authors: Gašper Glavan, Mikhail Shamonin VL - 21 IS - 19 SP - 1 EP - 19 PB - MDPI CY - Basel ER - TY - JOUR A1 - Savelev, Dmitrii V. A1 - Belyaeva, Inna A. A1 - Chashin, Dmitri V. A1 - Fetisov, Leonid Y. A1 - Romeis, Dirk A1 - Kettl, Wolfgang A1 - Kramarenko, Elena Yu A1 - Saphiannikova, Marina A1 - Stepanov, Gennady V. A1 - Shamonin (Chamonine), Mikhail T1 - Giant extensional strain of magnetoactive elastomeric cylinders in uniform magnetic fields JF - Materials N2 - Elongations of magnetoactive elastomers (MAEs) under ascending–descending uniform magnetic fields were studied experimentally using a laboratory apparatus specifically designed to measure large extensional strains (up to 20%) in compliant MAEs. In the literature, such a phenomenon is usually denoted as giant magnetostriction. The synthesized cylindrical MAE samples were based on polydimethylsiloxane matrices filled with micrometer-sized particles of carbonyl iron. The impact of both the macroscopic shape factor of the samples and their magneto-mechanical characteristics were evaluated. For this purpose, the aspect ratio of the MAE cylindrical samples, the concentration of magnetic particles in MAEs and the effective shear modulus were systematically varied. It was shown that the magnetically induced elongation of MAE cylinders in the maximum magnetic field of about 400 kA/m, applied along the cylinder axis, grew with the increasing aspect ratio. The effect of the sample composition is discussed in terms of magnetic filler rearrangements in magnetic fields and the observed experimental tendencies are rationalized by simple theoretical estimates. The obtained results can be used for the design of new smart materials with magnetic-field-controlled deformation properties, e.g., for soft robotics. KW - magnetostriction KW - magnetoactive elastomer KW - extensional strain KW - hysteresis KW - magnetomechanical effect KW - magnetodeformation Y1 - 2020 U6 - https://doi.org/10.3390/ma13153297 SN - 1996-1944 N1 - Corresponding author: Mikhail Shamonin VL - 13 IS - 15 SP - 1 EP - 17 PB - MDPI CY - Basel ER - TY - JOUR A1 - Putz, Christoph A1 - Schirmer, Maximilian A1 - Sattler, Robert A1 - Monkman, Gareth J. T1 - Fabrication of Bisphenol-free Boron-Siloxane Polymers JF - Materials Chemistry and Physics N2 - Interest in the preparation of magnetoactive boron-siloxane polymers (MBP) has been stimulated by recent scientific developments. However, recent regulations have prohibited the inclusion of Bisphenol-A normally employed in the manufacture of commercially available products. In the following publication, two different routes for the preparation of magnetoactive borosiloxane polymers have been taken. First, the possibilities of obtaining homogeneous mixtures of magnetoactive polymers by mixing the magnetic particles with the polymer using solid CO2 (dry ice) and stirring (shearing) are investigated. In the course of the work, an approach for the preparation of reference materials of different viscosities was made to prove the transferability to other elastomers. This is then followed by a brief review of the reaction of the polymer with different solvents in relation to the mixing with particles. In manually kneaded compounds, dispersions ranging from 0.00004 to 0.004 particles per mm3 are common. The process described in this work resulted in agglomerations of no greater than 0.00004 particles per mm3 A possible synthesis route for bisphenol-free boron-siloxanes is then considered, in which for the polymer matrix, polydimethylsilanes (dichloro(methyl)silane), boric acid and iron(III)chloride are used for this purpose by polycondensation. Y1 - 2025 U6 - https://doi.org/10.1016/j.matchemphys.2025.130567 N1 - Corresponding author der OTH Regensburg: Gareth J. Monkman PB - Elsevier ET - Journal Pre-proof ER - TY - JOUR A1 - Heberl, Michael A1 - Hofrichter, Andreas A1 - Rank, Daniel A1 - Bauer, Franz A1 - Sterner, Michael T1 - Influence of plant dimensioning and location on the ecology of PEM electrolysis JF - International Journal of Hydrogen Energy N2 - PV and wind systems with PEM electrolysis offer great potential for producing hydrogen with low emissions. Our research has identified the ecologically optimal size of PEM in relation to fixed PV/wind capacities. We calculate efficiencies and production volumes for PEM with 240 capacity and site variations. We analyse the global warming potential of all systems and draw conclusions about the optimal system design. The lowest GWP is achieved at the site with the highest full load hours with 1.32 kg CO2-eq/kg H2 (Wind, 28 MW electrolysis) and 4.24 kg CO2-eq/kg H2 (PV, 23 MW electrolysis). We have identified a clear trend: increasing PV/wind full load hours leads to higher ideal PEM capacities. However, there is a significant discrepancy between the ideal economic and ecological capacity. Furthermore, higher electrolysis capacities can achieve lower emissions as they increasingly operate at a more efficient partial load. KW - Electrolysis KW - Life cycle analysis KW - Global warming potential KW - Plant design KW - Renewable energy Y1 - 2025 U6 - https://doi.org/10.1016/j.ijhydene.2025.151039 SN - 0360-3199 VL - 167 PB - Elsevier ER - TY - JOUR A1 - Schumm, Leon A1 - Brown, Tom A1 - Abdel-Khalek, Hazem A1 - Ueckerdt, Falko A1 - Sterner, Michael A1 - Fioriti, David A1 - Parzen, Max T1 - The impact of temporal hydrogen regulation on hydrogen exporters and their domestic energy transition JF - Nature Communications N2 - As global demand for green hydrogen rises, potential hydrogen exporters move into the spotlight. While exports can bring countries revenue, large-scale on-grid hydrogen electrolysis for export can profoundly impact domestic energy prices and energy-related emissions. Our investigation explores the interplay of hydrogen exports, domestic energy transition and temporal hydrogen regulation, employing a sector-coupled energy model in Morocco. We find substantial co-benefits of domestic carbon dioxide mitigation and hydrogen exports, whereby exports can reduce market-based costs for domestic electricity consumers while mitigation reduces costs for hydrogen exporters. However, increasing hydrogen exports in a fossil-dominated system can substantially raise market-based costs for domestic electricity consumers, but surprisingly, temporal matching of hydrogen production can lower these costs by up to 31% with minimal impact on exporters. Here, we show that this policy instrument can steer the welfare (re-)distribution between hydrogen exporting firms, hydrogen importers, and domestic electricity consumers and hereby increases acceptance among actors. KW - Energy Transition KW - Hydrogen regulation Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-84857 N1 - Die Preprint-Version ist ebenfalls in diesem Repositorium verzeichnet unter: https://opus4.kobv.de/opus4-oth-regensburg/7272 VL - 16 PB - Nature CY - London ER - TY - CHAP A1 - Bugl, Benedikt A1 - Schneider, Viola I. A1 - Sehr, Armin T1 - Vertical Sound Localization: Precision and Robustness to Reverberation in a Large-Scale Study T2 - Proceedings of the 11th Convention of the European Acoustics Association Forum Acusticum / EuroNoise 2025 // Málaga, Spain ; 23-26. June 2025 N2 - Vertical sound localization, the ability to perceive the elevation of a sound source, is a fundamental aspect of human auditory perception, yet it remains far less understood than horizontal localization. Existing studies rely on small sample sizes, limiting the generalizability of findings. The presented study bridges that gap by examining vertical sound localization and precision in a cohort exceeding 150 participants, making it the largest investigation of its kind to date.Participants were exposed to broadband noise stimuli from various elevations under controlled anechoic conditions. The elevation localization error was measured by comparing perceived sound source elevations to actual positions of speakers of a curved array. Azimuth angles of arrival were altered between 0°, 45° and 90°. For a small group the experiment was repeated in echoic conditions, to gain insight in reverberation and reflection robustness of vertical sound localization.This large-scale study establishes benchmarks for vertical sound localization precision and robustness, advancing our understanding of human auditory spatial perception. These findings have implications for audio technology development, such as spatial audio rendering and hearing aid design, and lay the groundwork for further exploration into the neural and anatomical underpinnings of vertical localization. Y1 - 2025 SN - 978-84-87985-35-5 U6 - https://doi.org/10.61782/fa.2025.0953 SP - 3431 EP - 3434 PB - European Acoustics Association ER - TY - JOUR A1 - Schumm, Leon A1 - Haas, Jannik A1 - Peer, Rebecca A1 - Sterner, Michael T1 - The role of hydrogen offtaker regulation in highly renewable electricity systems JF - Energy N2 - The growing demand for green hydrogen necessitates a rapid scale-up of production and exports to meet decarbonization targets globally. However, current ramp-up efforts remain insufficient, calling for policies that unlock the potential of hydrogen as a low-carbon energy carrier. A key lever is the offtaker regulation, which impacts the pace and sustainability of export projects. This study investigates minimum renewable share requirements for hydrogen exports in countries with high renewable electricity shares. Using New Zealand as a case study, we develop a fully sector-coupled capacity expansion and dispatch model, integrating hydrogen and electricity network planning based on PyPSA-Earth. The model optimizes New Zealand’s energy system under varying export scenarios, renewable electricity shares, and resulting system impacts. We find that domestic electricity demand and renewable expansion rates dominate long-term outcomes, while progressive regulation enables short-term hydrogen and Power-to-X exports. Relaxing the renewable threshold from 80% to 60% triples export volumes from 2.5 TWh to 8.2 TWh by 2030. We propose a two-stage requirement: an initially progressive threshold to attract investment with low consequential emissions, followed by stricter regulation to prevent high emissions, rising domestic electricity prices, and declining hydrogen competitiveness. This framework, demonstrated for New Zealand, can guide hydrogen-exporting countries worldwide. KW - Climate neutrality KW - e-fuels KW - Emission intensity KW - Energy systems modelling KW - Hydrogen exports KW - Hydrogen offtaker regulation KW - Power-to-X Y1 - 2026 U6 - https://doi.org/10.1016/j.energy.2025.139513 N1 - Corresponding author der OTH Regensburg: Leon Schumm VL - 342 PB - Elsevier ER - TY - JOUR A1 - Glavan, Gašper A1 - Belyaeva, Inna A. A1 - Shamonin (Chamonine), Mikhail T1 - Multiferroic Cantilevers Containing a Magnetoactive Elastomer: Magnetoelectric Response to Low-Frequency Magnetic Fields of Triangular and Sinusoidal Waveform JF - Sensors N2 - In this work, multiferroic cantilevers comprise a layer of a magnetoactive elastomer (MAE) and a commercially available piezoelectric polymer-based vibration sensor. The structures are fixed at one end in the horizontal plane and the magnetic field is applied vertically. First, the magnetoelectric (ME) response to uniform, triangle-wave magnetic fields with five different slew rates is investigated experimentally. Time and field dependences of the generated voltage, electric charge, and observed mechanical deflection are obtained and compared for four different thicknesses of the MAE layer. The ME responses to triangular and sinusoidal wave excitations are examined in contrast. Second, the ME response at low frequencies (≤3 Hz) is studied by the standard method of harmonic magnetic field modulation. The highest ME coupling coefficient is observed in the bias magnetic field strength of ≈73 kA/m and it is estimated to be about 3.3 ns/m (ME voltage coefficient ≈ 25 V/A) at theoretically vanishing modulation frequency (f→0 Hz). Presented results demonstrate that the investigated heterostructures are promising for applications as magnetic-field sensors and energy harvesting devices. KW - magnetoactive elastomer KW - piezoelectric polymer KW - multilayer cantilever KW - direct magnetoelectric effect KW - magnetic field sensing Y1 - 2022 U6 - https://doi.org/10.3390/s22103791 N1 - Corresponding authors: Gašper Glavan und Mikhail Shamonin Veröffentlichtes Datenset: https://doi.org/10.5281/zenodo.14651784 VL - 22 IS - 10 SP - 1 EP - 17 PB - MDPI CY - Basel ER - TY - JOUR A1 - Glavan, Gašper A1 - Belyaeva, Inna A. A1 - Shamonin (Chamonine), Mikhail T1 - Transient Response of Macroscopic Deformation of Magnetoactive Elastomeric Cylinders in Uniform Magnetic Fields JF - Polymers N2 - Significant deformations of bodies made from compliant magnetoactive elastomers (MAE) in magnetic fields make these materials promising for applications in magnetically controlled actuators for soft robotics. Reported experimental research in this context was devoted to the behaviour in the quasi-static magnetic field, but the transient dynamics are of great practical importance. This paper presents an experimental study of the transient response of apparent longitudinal and transverse strains of a family of isotropic and anisotropic MAE cylinders with six different aspect ratios in time-varying uniform magnetic fields. The time dependence of the magnetic field has a trapezoidal form, where the rate of both legs is varied between 52 and 757 kA/(s·m) and the maximum magnetic field takes three values between 153 and 505 kA/m. It is proposed to introduce four characteristic times: two for the delay of the transient response during increasing and decreasing magnetic field, as well as two for rise and fall times. To facilitate the comparison between different magnetic field rates, these characteristic times are further normalized on the rise time of the magnetic field ramp. The dependence of the normalized characteristic times on the aspect ratio, the magnetic field slew rate, maximum magnetic field values, initial internal structure (isotropic versus anisotropic specimens) and weight fraction of the soft-magnetic filler are obtained and discussed in detail. The normalized magnetostrictive hysteresis loop is introduced, and used to explain why the normalized delay times vary with changing experimental parameters. KW - magnetoactive elastomer KW - magnetorheological elastomer KW - macroscopic deformation KW - magnetostriction KW - time-varying magnetic field Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-71067 SN - 2073-4360 N1 - Corresponding author der OTH Regensburg: Gašper Glavan Zugehöriges Datenset: doi:10.5281/zenodo.10679499 VL - 16 IS - 5, Special Issue Magnetic Polymer Composites: Design and Application II PB - MDPI CY - Basel, Schweiz ER - TY - JOUR A1 - Schiek, Roland A1 - Solntsev, Alexander S. A1 - Neshev, Dragomir N. T1 - Measurement of the cubic nonlinear susceptibility in lithium niobate JF - Optical Materials Express N2 - We measured the cubic nonlinear susceptibility tensor elements ( χ(3)) for polarization along the primary crystallographic axis in titanium-indiffused lithium niobate waveguides, assessed through self-phase modulation using picosecond-duration pulses at telecommunication wavelengths. A dominant, highly temperature- and wavelength-dependent contribution from a cascaded second-order nonlinearity is observed. Through careful extraction of the cascaded effect, we quantify the intrinsic third-order susceptibility tensor elements as χ(3) zzzz(ω; ω, ω, −ω) = (5.2 ± 1.3) × 10−21 m2 V2 and χ(3) xxxx(ω; ω, ω, −ω) = χ(3) yyyy(ω; ω, ω, −ω) = (3.6 ± 0.8) × 10−21 m2 V2 . These measurements underscore the substantial impact of the cascaded nonlinearity in enhancing the effective cubic nonlinearity in lithium niobate and offer precise values essential for the design of nonlinear photonic devices. Y1 - 2025 U6 - https://doi.org/10.1364/OME.557516 SN - 2159-3930 N1 - Corresponding author der OTH Regensburg: Schiek, Roland VL - 15 IS - 5 SP - 1100 EP - 1117 PB - Optica Publishing Group ER -