TY - JOUR A1 - Pangerl, Jonas A1 - Müller, Max A1 - Rück, Thomas A1 - Weigl, Stefan A1 - Bierl, Rudolf T1 - Characterizing a sensitive compact mid-infrared photoacoustic sensor for methane, ethane and acetylene detection considering changing ambient parameters and bulk composition (N2, O2 and H2O) JF - Sensors and Actuators B: Chemical N2 - We present a sensitive and compact interband cascade laser (ICL) based photoacoustic setup for the detection of gaseous hydrocarbons and discuss its applicability towards trace gas analysis. We investigated the performance of the sensor for trace concentrations of methane, ethane and acetylene diluted in nitrogen. The excitation of methane and ethane was accomplished using one tunable diode laser, covering a range from 3360 to 3372 nm, which was replaced by a separate ICL at 3025 nm for acetylene detection. The influence of ambient parameters such as temperature, flow rate and pressure as well as potential cross-sensitivities towards O2 and H2O have been examined in terms of methane and acetylene detection. A series of simulations proved several of these influences to be attributed to relaxation effects. With a 3σ limit of detection (LoD) of 6.8 parts per billion (ppbV) in case of methane, 2.3 ppbV regarding ethane and 3.6 ppbV in terms of acetylene, the sensor demonstrates a great potential for applications in the field of trace gas analysis. KW - Acetylene KW - Cross-sensitivities KW - Ethane KW - Interband cascade laser KW - Methane KW - Photoacoustic spectroscopy KW - Relaxation effects Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-25868 N1 - Corresponding author: Jonas Pangerl VL - 352,1 SP - 1 EP - 12 PB - Elsevier ER - TY - JOUR A1 - Burdin, Dmitrii A. A1 - Ekonomov, Nikolai A. A1 - Chashin, Dmitri V. A1 - Fetisov, Leonid Y. A1 - Fetisov, Yuri K. A1 - Shamonin (Chamonine), Mikhail T1 - Temperature Dependence of the Resonant Magnetoelectric Effect in Layered Heterostructures JF - Materials N2 - The dependence of the resonant direct magnetoelectric effect on temperature is studied experimentally in planar composite structures. Samples of rectangular shapes with dimensions of 5 mm x 20 mm employed ferromagnetic layers of either an amorphous (metallic glass) alloy or nickel with a thickness of 20-200 m and piezoelectric layers of single crystalline langatate material or lead zirconate titanate piezoelectric ceramics with a thickness of 500 m. The temperature of the samples was varied in a range between 120 and 390 K by blowing a gaseous nitrogen stream around them. It is shown that the effective characteristics of the magnetoelectric effectsuch as the mechanical resonance frequency f(r), the quality factor Q and the magnitude of the magnetoelectric coefficient (E) at the resonance frequencyare contingent on temperature. The interrelations between the temperature changes of the characteristics of the magnetoelectric effect and the temperature variations of the following material parametersYoung's modulus Y, the acoustic quality factor of individual layers, the dielectric constant epsilon, the piezoelectric modulus d of the piezoelectric layer as well as the piezomagnetic coefficients ((n)) of the ferromagnetic layerare established. The effect of temperature on the characteristics of the nonlinear magnetoelectric effect is observed for the first time. The results can be useful for designing magnetoelectric heterostructures with specified temperature characteristics, in particular, for the development of thermally stabilized magnetoelectric devices. KW - acoustic quality factor KW - composite structure KW - linear KW - magnetoelectric effect KW - magnetoelectric heterostructure KW - magnetostriction KW - nonlinear KW - piezoelectric KW - temperature dependence Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-32185 N1 - corresponding author: Mikhail Shamonin VL - 10 IS - 10 PB - MDPI ER - TY - JOUR A1 - Monkman, Gareth J. A1 - Sindersberger, Dirk A1 - Prem, Nina T1 - Magnetically enhanced photoconductive high voltage control JF - ISSS Journal of Micro and Smart Systems N2 - The recent surge of interest in electrostatic actuators, particularly for soft robotic applications, has placed increasing demands on high voltage control technology. In this respect, optoelectronic bidirectional switching and analogue regulation of high voltages is becoming increasingly important. One common problem is the leakage current due to dark resistance of the material or device used. Another is the physical size of such elements. However, their ability to provide galvanic separation makes them a very attractive alternative to conventional (wired) semiconductor elements. This paper gives an overview of available methods and devices before introducing a concept based on the combination of photoresistive and magnetoresistive effects in Gallium Arsenide that are potentially applicable to other semiconductor materials. KW - GaAs KW - High voltage actuators KW - Magnetoresistance KW - Opto-sensors KW - Photoconduction KW - Soft robotics Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-30606 N1 - Corresponding author: Gareth J. Monkman VL - 11 SP - 317 EP - 328 PB - Springer Nature ER - TY - CHAP A1 - Diehl, Andreas A1 - Wolff, Lilli A1 - Fuhrmann, Thomas A1 - Niemetz, Michael A1 - Mörtlbauer, Stefanie A1 - Dirnberger, Sandra T1 - Compact Freshmen Welcome Seminar for Engineering Students T2 - Procedia - Social and Behavioral Sciences N2 - The Faculty of Electrical Engineering and Information Technology of the OTH Regensburg developed and implemented a compact freshmen seminar for the afternoon of the first day of study. The intention of this seminar is to help the freshmen during their transition between school and study without losing lecture time in the first semester. The concept was tested with one small study group at the beginning of the summer semester 2015. To rate the impact of the seminar and to find aspects for continuous improvement an evaluation method was developed and used. Due to the good student resonance during the first run, this introduction seminar was held again in the winter semester 2015/16. It is planned to integrate this seminar as a regular session for all freshmen of the faculty curriculum and monitor the long-term effects of student motivation and success. KW - Engineering Education KW - Freshmen Seminar Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-31034 N1 - Corresponding author: Thomas Fuhrmann IS - 228 SP - 45 EP - 52 PB - Elsevier ER - TY - JOUR A1 - Westner, Markus T1 - Rezension "Designed for Digital". BT - Ross, J. W., Beath, C. M., & Mocker, M. (2019). Designed for digital: How to architect your business for sustained success. The MIT Press. ISBN 978-0262042888 JF - HMD Praxis Der Wirtschaftsinformatik Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-38626 N1 - Corresponding author: Markus Westner PB - Springer Nature ER - TY - JOUR A1 - Grad, Marius A1 - Nadammal, Naresh A1 - Schultheiss, Ulrich A1 - Lulla, Philipp A1 - Noster, Ulf T1 - An Integrative Experimental Approach to Design Optimization and Removal Strategies of Supporting Structures Used during L-PBF of SS316L Aortic Stents JF - Applied Sciences N2 - One of the fundamental challenges in L-PBF of filigree geometries, such as aortic stents used in biomedical applications, is the requirement for a robust yet easily removable support structure that allows each component to be successfully fabricated without distortion. To solve this challenge, an integrative experimental approach was attempted in the present study by identifying an optimal support structure design and an optimized support removal strategy for this design. The specimens were manufactured using four different support structure designs based on the geometry exposed to the laser beam during the L-PBF. Support removal procedures included sand blasting (SB), glass bead blasting (GB), and electrochemical polishing (ECP). The two best-performing designs (line and cross) were chosen due to shorter lead times and lower material consumption. As an additional factor that indicates a stable design, the breaking load requirement to remove the support structures was determined. A modified line support with a 145° included angle was shown to be the best support structure design in terms of breaking load, material consumption, and manufacturing time. All three procedures were used to ensure residue-free support removal for this modified line support design, with ECP proving to be the most effective. Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-25612 N1 - Corresponding author: Marius Grad VL - 11 IS - 19 SP - 1 EP - 22 PB - MPDL ER - TY - JOUR A1 - Sterner, Michael A1 - Specht, Michael T1 - Power-to-Gas and Power-to-X-The History and Results of Developing a New Storage Concept JF - Energies N2 - Germany's energy transition, known as 'Energiewende', was always very progressive. However, it came technically to a halt at the question of large-scale, seasonal energy storage for wind and solar, which was not available. At the end of the 2000s, we combined our knowledge of both electrical and process engineering, imitated nature by copying photosynthesis and developed Power-to-Gas by combining water electrolysis with CO2-methanation to convert water and CO2 together with wind and solar power to synthetic natural gas. Storing green energy by coupling the electricity with the gas sector using its vast TWh-scale storage facility was the solution for the biggest energy problem of our time. This was the first concept that created the term 'sector coupling' or 'sectoral integration'. We first implemented demo sites, presented our work in research, industry and ministries, and applied it in many macroeconomic studies. It was an initial idea that inspired others to rethink electricity as well as eFuels as an energy source and energy carrier. We developed the concept further to include Power-to-Liquid, Power-to-Chemicals and other ways to 'convert' electricity into molecules and climate-neutral feedstocks, and named it 'Power-to-X'at the beginning of the 2010s. KW - 100% renewable energy scenarios KW - CARBON RECYCLING SYSTEM KW - CO2 KW - eFuels KW - electric fuels KW - energy transition KW - hydrogen KW - methanation KW - METHANOL KW - Power-to-Gas KW - Power-to-Hydrogen KW - Power-to-Methane KW - Power-to-X KW - sector coupling KW - sectoral integration KW - TRANSPORTATION Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-26202 N1 - Corresponding author: Michael Sterner VL - 14 IS - 20 PB - MDPI ER - TY - JOUR A1 - Schiek, Roland T1 - Excitation of nonlinear beams: from the linear Talbot effect through modulation instability to Akhmediev breathers JF - Optics express N2 - The smooth transition between stable, Talbot-effect-dominated and modulationally unstable nonlinear optical beam propagation is described as the superposition of oscillating, growing and decaying eigenmodes of the common linearized theory of modulation instability. The saturation of the instability in form of breather maxima is embedded between eigenmode growth and decay. This explains well the changes of beam characteristics when the input intensity increases in experiments on modulation instability and breather excitation in spatial-spatial experimental platforms. An increased accuracy of instability gain measurements, a variety of interesting nonlinear beam scenarios and a more selective and well-directed breather excitation are demonstrated experimentally. KW - DYNAMICS KW - FIBER KW - GENERATION KW - PEREGRINE SOLITON KW - SPATIAL SOLITONS KW - WAVE-GUIDE Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-26049 N1 - Corresponding author: Roland Schiek VL - 29 IS - 10 SP - 15830 EP - 15851 PB - Optica Publishing Group CY - Washington, DC, USA ER - TY - JOUR A1 - Schildgen, Johannes T1 - Interaktive Vorlesungsfolien mit SQL-Unterstützung JF - Datenbank-Spektrum N2 - Mit PowerPoint oder LaTeX Beamer erstellte Vorlesungsfolien sind meist statisch und dienen hauptsächlich der Präsentation von Lehrinhalten. Als Alternative dazu werden drei Erweiterungen für das HTML- und JavaScript-basierte Präsentationsframework reveal.js vorgestellt, die für mehr Interaktion in der Datenbankenlehre sorgen sollen: (1) Eine Live-Ausführung von SQL-Anfragen und eine Darstellung des Anfrageergebnisses direkt auf der Folie; mit Möglichkeit zur Anpassung der Anfrage im Präsentationsbetrieb, (2) eine JSON-basierte Beschreibung von ER-Diagrammen, welche graphisch auf den Folien dargestellt werden sollen und (3) eingebettete Smartphone-Umfragen, um zwischendurch – ohne einen Kontextwechsel – Quiz-Fragen zu stellen. Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-26059 N1 - Corresponding author: Johannes Schildgen VL - 21 IS - 1 SP - 19 EP - 27 PB - Springer Nature ER - TY - JOUR A1 - Monkman, Gareth J. A1 - Striegl, Birgit A1 - Prem, Nina A1 - Sindersberger, Dirk T1 - Electrical Properties of Magnetoactive Boron‐Organo‐Silicon Oxide Polymers JF - Macromolecular Chemistry and Physics N2 - The electrical properties of rheopectic magnetoactive composites comprising boron-organo-silicon oxide dielectric matrices containing carbonyl iron microparticles are presented for the first time. The increase in interfacial magnetocapacitance is seen to greatly exceed that experienced when using conventional elastomeric matrices such as polydimethylsiloxane. In addition to the increase in capacitance, a simultaneous and sharp decrease in the parallel electrical resistance over several orders of magnitude is also observed. The effects are time dependent but repeatable. Potential applications include magnetically controlled frequency dependent devices, magnetic sensor systems, weighting elements for neural networks, etc. Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-26488 N1 - Corresponding author: Gareth J. Monkman VL - 221 IS - 4 SP - 1 EP - 8 PB - Wiley ER - TY - JOUR A1 - Prem, Nina A1 - Sindersberger, Dirk A1 - Monkman, Gareth J. T1 - Infrared spectral analysis of low concentration magnetoactive polymers JF - Journal of Applied Polymer Science N2 - This work concerns an area of magnetoactive polymer (MAP) research seldom considered. Traditionally only MAP with high concentrations of magnetic filler (typically between 10 and 90 wt%) have been investigated. This article deals with a hitherto neglected aspect of research, namely MAP containing lower magnetic filler concentrations (1 to 3 wt%). This article utilizes a range of spectroscopic analysis methods (Raman and FTIR) and their applicability to MAP characterization at wavelengths ranging from 2.5 to 25 mu m. Particular attention is paid to low carbonyl iron particle (CIP) concentrations in MAP for which the emergence of capillary doublets at a critical 2 wt% concentration is revealed. This results in measurable magnetic field-dependent changes in IR absorption at a wavelength of 4.255 mu m together with a detectable CO2 susceptibility. (c) 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 48366. KW - ELASTOMERS KW - magnetism and magnetic properties KW - sensors and actuators KW - spectroscopy Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-25913 SN - 1097-4628 N1 - Corresponding author: Nina Prem VL - 137 IS - 7 SP - 1 EP - 7 PB - Wiley ER - TY - JOUR A1 - Chow, Rosan T1 - Moving forward together JF - Strategic Design Research Journal Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-29007 N1 - corresponding author: Rosan Chow VL - 11 IS - 2 SP - 167 EP - 169 PB - OJS/PKP ER - TY - JOUR A1 - Müller, Max A1 - Rück, Thomas A1 - Jobst, Simon A1 - Pangerl, Jonas A1 - Weigl, Stefan A1 - Bierl, Rudolf A1 - Matysik, Frank-Michael T1 - An Algorithmic Approach to Compute the Effect of Non-Radiative Relaxation Processes in Photoacoustic Spectroscopy JF - Photoacoustics N2 - Successful transfer of photoacoustic gas sensors from laboratory to real-life applications requires knowledge about potential cross-sensitivities towards environmental and gas matrix changes. Multi-dimensional calibration in case of cross-sensitivities can become very complex or even unfeasible. To address this challenge, we present a novel algorithm to compute the collision based non-radiative efficiency and phase lag of energy relaxation on a molecular level (CoNRad) for photoacoustic signal calculation. This algorithmic approach allows to calculate the entire elaxation cascade of arbitrarily complex systems, yielding a theoretical photoacoustic signal. In this work the influence of varying bulk compositions, i.e. nitrogen (N2), oxygen (O2) and water (H2O) on the photoacoustic signal during methane (CH4) detection is demonstrated. The applicability of the algorithm to other photoacoustic setups is shown exemplary by applying it to the relaxational system investigated in [1]. Hayden et al. examined the effect of water on photoacoustic carbon monoxide (CO) detection. Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-39935 N1 - Corresponding author: Max Müller VL - 26 PB - Elsevier ER - TY - JOUR A1 - Görtler, Michael T1 - Rechtspopulismus als (komplexe) Problemstellung der Sozialen Arbeit JF - Soziale Passagen : Journal für Empirie und Theorie Sozialer Arbeit N2 - Dieser Beitrag enthält Überlegungen zum Rechtspopulismus als (komplexe) Problemstellung der Sozialen Arbeit. Eine theoretisch-reflexive Analyse pädagogischer und didaktischer Ansätze, eine qualitative Analyse zu Herausforderungen und Bewältigungsstrategien von Fachkräften in der Kinder- und Jugendhilfe sowie eine Analyse aktueller Veröffentlichungen und Stellungnahmen im Kontext des Rechtspopulismus legen die Vermutung nahe, dass sich die Soziale Arbeit aufgrund der Komplexität dieses gesellschaftlichen und politischen Phänomens in einer Suchbewegung befindet. KW - Kinder- und Jugendhilfe KW - Padagogische und didaktische Ansätze KW - Soziale Arbeit KW - Rechtspopulismus KW - Politische Bildung KW - Professionalität Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-45323 N1 - Corresponding author: Michael Görtler VL - 14 SP - 193 EP - 199 PB - Springer Nature ER - TY - JOUR A1 - Gärtner, Sebastian A1 - Marx-Schubach, Thomas A1 - Gaderer, Matthias A1 - Schmitz, Gerhard A1 - Sterner, Michael T1 - Techno-Economic Analysis of Carbon Dioxide Separation for an Innovative Energy Concept towards Low-Emission Glass Melting JF - energies N2 - The currently still high fossil energy demand is forcing the glass industry to search for innovative approaches for the reduction in CO2 emissions and the integration of renewable energy sources. In this paper, a novel power-to-methane concept is presented and discussed for this purpose. A special focus is on methods for the required CO2 capture from typical flue gases in the glass industry, which have hardly been explored to date. To close this research gap, process simulation models are developed to investigate post-combustion CO2 capture by absorption processes, followed by a techno-economic evaluation. Due to reduced flue gas volume, the designed CO2 capture plant is found to be much smaller (40 m3 absorber column volume) than absorption-based CO2 separation processes for power plants (12,560 m3 absorber column volume). As there are many options for waste heat utilization in the glass industry, the waste heat required for CO2 desorption can be generated in a particularly efficient and cost-effective way. The resulting CO2 separation costs range between 41 and 42 EUR/t CO2, depending on waste heat utilization for desorption. These costs are below the values of 50–65 EUR/t CO2 for comparable industrial applications. Despite these promising economic results, there are still some technical restrictions in terms of solvent degradation due to the high oxygen content in flue gas compositions. The results of this study point towards parametric studies for approaching these issues, such as the use of secondary and tertiary amines as solvents, or the optimization of operating conditions such as stripper pressure for further cost reductions potential. KW - economic evaluation KW - CO2-separation KW - glass industry KW - oxyfuel KW - methanation KW - power-to-gas Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-53627 N1 - Corresponding author: Sebastian Gärtner VL - 16 IS - 5 SP - 1 EP - 25 PB - MDPI CY - Basel ER - TY - JOUR A1 - Grad, Marius A1 - Nadammal, Naresh A1 - Tytko, Darius A1 - Noster, Ulf T1 - On the nanoindentation behavior of a TiC layer formed through thermo-reactive diffusion during hot pressing of Ti and cast iron JF - Materials Letters: X N2 - Hot pressing of pure Ti and cast iron under vacuum formed a ~15 μm wide TiC-layer through the thermoreactive diffusion process. Nanoindentation testing of the TiC-layer revealed average hardness and elastic modulus values of ~35 GPa and ~400 GPa, respectively. High-resolution indentation mapping indicated hardness change across the boundary with peak values observed within the TiC-layer. Solid state high temperature diffusion holds significant potential for developing uniform hard coatings on pure Ti/Ti-alloys. KW - Titanium alloys KW - Hard coating KW - Nanoindentation KW - Electron backscatter diffraction Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-50066 SN - 2590-1508 N1 - Corresponding author: Marius Grad VL - 15 IS - September SP - 1 EP - 4 PB - Elsevier CY - Amsterdam, Niederlande ER - TY - JOUR A1 - Zacherl, Florian A1 - Wopper, Christoph A1 - Schwanzer, Peter A1 - Rabl, Hans-Peter T1 - Potential of the Synthetic Fuel Oxymethylene Ether (OME) for the Usage in a Single-Cylinder Non-Road Diesel Engine: Thermodynamics and Emissions JF - Energies N2 - Non-road sectors, such as agriculture and construction machinery, require high energy densities and flexibility in use, which is why diesel engines are mainly used. The use of climate-neutral fuels, produced from renewable energies, such as Oxymethylene Ether (OME) as a diesel substitute, can significantly reduce CO2 and pollutant emissions in these sectors. In addition to CO2 neutrality, OME also offers improved combustion characteristics compared to diesel fuel, eliminating the soot–NOx trade-off and thus enabling new opportunities in engine design and calibration. In this paper, the combustion of pure OME on a close-to-production, single-cylinder non-road diesel engine with a pump–line–nozzle injection system is analyzed. A variation of the center of combustion at constant power output was performed for diesel and OME at different operating points. Two injectors were investigated with OME. A study on ignition delay and a detailed thermodynamic analysis was carried out. In addition, the exhaust emissions CO, NOx, VOC, as well as particulate-matter, -number and -size distributions were measured. With OME, a significantly shorter ignition delay as well as a shortened combustion duration could be observed, despite a longer injection duration. In addition, the maximum injection pressure increases. VOC and CO emissions are reduced. Particulate matter was reduced by more than 99% and particle number (>10 nm) was reduced by multiple orders of magnitude. The median of the particle size distribution shifts from 60 to 85 nm (diesel) into a diameter range of sub 23 nm (OME). A significant reduction of NOx emissions with OME enables new degrees of freedom in engine calibration and an efficiency advantage without hardware adaption. Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-55350 N1 - Project: NAMOSYN: Nachhaltige Mobilität durch synthetische Kraftstoffe (Funding Nr. 03SF0566N0) N1 - Corresponding author: Florian Zacherl VL - 15 IS - 21 SP - 1 EP - 26 PB - MDPI ER - TY - JOUR A1 - Troidl, Kilian A1 - Schroll-Decker, Irmgard T1 - Wie theoriebasiert sind Forschungsbeiträge zur Bildungsbeteiligung? Eine Qualitative Inhaltsanalyse ausgewählter Fachzeitschriften der Erwachsenen- und Weiterbildungsforschung JF - Zeitschrift für Weiterbildungsforschung N2 - In der Vergangenheit wurde beklagt, dass in der empirischen Forschung zur Bildungsbeteiligung Erwachsener selten eine Integration von Theorie und Empirie erfolge und die mangelnde empirische Prüfung eine theoretische Weiterentwicklung des Forschungsfeldes erschwere. Mittels einer Qualitativen Inhaltsanalyse von Beiträgen ausgewählter Fachzeitschriften der Erwachsenen‑/Weiterbildungsforschung wurde versucht, die Aktualität dieser Feststellung empirisch zu überprüfen. Dazu wurden 38 empirische Forschungsbeiträge zur Bildungsbeteiligung der Jahrgänge 2018 bis 2020 von neun Fachzeitschriften mit Peer-Review untersucht. Die Einschätzung der Beiträge erfolgte hinsichtlich des Grades der Theorieeinbindung. Die Ergebnisse der Analyse zeigen ein gemischtes Bild: neun Beiträge (24 %) binden keine Theorie in den Forschungsprozess ein, ein Beitrag (3 %) zitiert Theorie lediglich, ohne sie weiter einzubinden. Am häufigsten ist eine Einbindung zum theoriegeleiteten Vorgehen (16 Beiträge, 42 %). Eine tiefergehende Theorieanwendung findet sich in sechs Beiträgen (16 %). Eine theorieprüfende oder -bildende Einbindung liegt mit je drei Beiträgen (je 8 %) seltener vor. Die rezipierten Theorien sind vielfältig: es werden 20 verschiedene Theorieansätze festgestellt. Den Forderungen nach einer verstärkten Einbindung von Theorie in den Forschungsprozess kann somit weiterhin Gültigkeit attestiert werden: ein substanzieller Teil der Beiträge berichtet keine Theorieeinbindung, eine empirische Prüfung oder Weiterentwicklung findet relativ selten statt. N2 - Regarding empirical research on participation in adult education, it has been criticized that only rarely has there been an integration of theoretical and empirical approaches and that empirical testing was lacking. This, it has been stated, was an impediment to further developing the research field. To empirically check if this is still the case, a qualitative content analysis of selected journals in the field of adult and continuing education was carried out. 38 peer-reviewed articles, published in professional journals between 2018 and 2020, which presented empirical research on participation in adult education were examined. The main goal of this study was to assess the extent to which theory is used in these articles along a continuum of theory use. The result of the analysis gave a mixed picture. Nine contributions (24%) show no reference to theory at all, one contribution (3%) merely cites theoretical work without making further use of it. Most frequently, theory is reported to inform the empirical research (16 contributions, 42%); six contributions (16%) further apply theory. Only three contributions (8%) report either theory testing or building. The theories used vary: 20 different theoretical approaches were observed. A thorough integration of theory into the research process still seems to be lacking: Most articles report no or only limited use of theory. Empirical testing or further development of theory only takes place in a small portion of the studies analyzed. T2 - The use of theory in research on participation in adult education: A qualitative content analysis of key adult and continuing education journals KW - Erwachsenenbildung KW - Weiterbildung KW - Wissenschaftliche Zeitschrift KW - Qualitative Inhaltsanalyse KW - Bildungsbeteiligung KW - Adult learning participation KW - Research on participation KW - Theory use KW - Journals KW - Qualitative content analysis Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-55460 N1 - Corresponding author: Irmgard Schroll-Decker VL - 45 PB - Springer Nature ER - TY - JOUR A1 - Haug, Sonja A1 - Schnell, Rainer A1 - Scharf, Anna A1 - Altenbuchner, Amelie A1 - Weber, Karsten T1 - Bereitschaft zur Impfung mit einem COVID-19-Vakzin - Risikoeinschätzung, Impferfahrungen und Einstellung zu Behandlungsverfahren JF - Prävention und Gesundheitsförderung N2 - Hintergrund Impfungen stellen eine bedeutende Präventionsmaßnahme dar. Grundlegend für die Eindämmung der Coronapandemie mittels Durchimpfung der Gesellschaft ist eine ausgeprägte Impfbereitschaft. Ziel der Arbeit Die Impfbereitschaft mit einem COVID‑19-Vakzin (Impfstoff gegen das Coronavirus) und deren Einflussfaktoren werden anhand einer Zufallsstichprobe der Gesamtbevölkerung in Deutschland untersucht. Material und Methoden Die Studie basiert auf einer telefonischen Zufallsstichprobe und berücksichtigt ältere und vorerkrankte Personen ihrem Bevölkerungsanteil entsprechend. Die Ein-Themen-Bevölkerungsbefragung zur Impfbereitschaft (n = 2014) wurde im November/Dezember 2020 durchgeführt. Ergebnisse Die Impfbereitschaft in der Stichprobe liegt bei rund 67 %. Vorerfahrungen mit Impfungen moderieren die Impfbereitschaft. Sie steigt bei Zugehörigkeit zu einer Risikogruppe. Der Glaube an die Wirksamkeit alternativer Heilmethoden und Befürwortung alternativer Behandlungsverfahren geht mit geringerer Impfbereitschaft einher. Ältere Menschen sind impfbereiter, kovariierend mit ihrer Einschätzung höherer Gefährdung bei Erkrankung. Ebenso ist die Ablehnung einer Impfung mit der Überschätzung von Nebenwirkungen assoziiert. Schlussfolgerung Die Impfbereitschaft hängt mit Impferfahrungen und Einstellungen zu Gesundheitsbehandlungsverfahren allgemein zusammen. Die Überschätzung der Häufigkeit ernsthafter Nebenwirkungen bei Impfungen weist auf weit verbreitete Fehlinformationen hin. T2 - Willingness to be vaccinated with a COVID‑19 vaccine—risk assessment, vaccination experiences and towards treatment procedures KW - Coronavirus-Impfung KW - Risikogruppe KW - Impfnebenwirkungen KW - Einstellung zu Medizin KW - Arztbesuche Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-154 N1 - Corresponding Author: Sonja Haug VL - 17 IS - 4 SP - 537 EP - 544 PB - Springer Nature ER - TY - JOUR A1 - Altenbuchner, Amelie A1 - Haug, Sonja A1 - Schnell, Rainer A1 - Scharf, Anna A1 - Weber, Karsten T1 - Impfbereitschaft von Eltern mit einem COVID-19-Vakzin BT - Die Rolle von Elternschaft und Geschlecht JF - Pädiatrie & Pädologie. Österreichische Zeitschrift für Kinder- & Jugendheilkunde N2 - Hintergrund: Eltern stehen im Rahmen der eigenen Impfung und der Kinderimpfung mit einem COVID-19-Vakzin vor einer Impfentscheidung. Zum aktuellen Zeitpunkt gibt es keine (vollständige) Impfempfehlung. Fragestellung: Die Studie untersucht die Impfbereitschaft von Eltern minderjähriger Kinder und Personen ohne minderjährige Kinder, wobei insbesondere Geschlechtsunterschiede überprüft werden. Methoden: Die Studie basiert auf einer Zufallsstichprobe (Telefon-Survey, n = 2014, Erhebung zwischen 12.11.2020 und 10.12.2020). Die Auswertung stützt sich insbesondere auf die Teilstichprobe von Personen mit minderjährigen Kindern im Haushalt (n = 461). Ergebnisse: Eltern weisen durchgängig eine geringere Impfbereitschaft mit einem COVID-19-Vakzin auf als Befragte ohne minderjährige Kinder (54,1 % vs. 71,1 %). Väter weisen eine stärker ausgeprägte eigene Impfbereitschaft auf als Mütter. Darüber hinaus sind Männer eher als Frauen bereit, das eigene Kind mit einem COVID-19-Vakzin impfen zu lassen. Schlussfolgerungen: Bei Eltern und insbesondere Müttern ist eine erhebliche Fehleinschätzung von Impfrisiken und häufiger Glaube an Impfverschwörungstheorien zu beobachten. Empfohlen werden anschauliche und leicht verständliche Informationen über die Wirkung und Nebenwirkungen der Impfung mit einem COVID-19-Vakzin durch zuständige Institutionen und Ärzte. T2 - Parentsʼ Willingness to Vaccinate with a COVID-19 Vaccine KW - Nebenwirkungen KW - Impfstoffverschwörungsglaube KW - Einstellung zu Homöopathie KW - Risikokommunikation KW - Impfberatung Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-196 N1 - Corresponding Author: Sonja Haug VL - 56 IS - 5 SP - 230 EP - 234 PB - Springer Nature ER -