TY - JOUR A1 - Schoenenwald, Alexander A1 - Kern, Simon A1 - Viehhauser, Josef A1 - Schildgen, Johannes T1 - Collecting and visualizing data lineage of Spark jobs JF - Datenbank-Spektrum N2 - Metadata management constitutes a key prerequisite for enterprises as they engage in data analytics and governance. Today, however, the context of data is often only manually documented by subject matter experts, and lacks completeness and reliability due to the complex nature of data pipelines. Thus, collecting data lineage—describing the origin, structure, and dependencies of data—in an automated fashion increases quality of provided metadata and reduces manual effort, making it critical for the development and operation of data pipelines. In our practice report, we propose an end-to-end solution that digests lineage via (Py‑)Spark execution plans. We build upon the open-source component Spline, allowing us to reliably consume lineage metadata and identify interdependencies. We map the digested data into an expandable data model, enabling us to extract graph structures for both coarse- and fine-grained data lineage. Lastly, our solution visualizes the extracted data lineage via a modern web app, and integrates with BMW Group’s soon-to-be open-sourced Cloud Data Hub. Y1 - 2021 U6 - https://doi.org/10.1007/s13222-021-00387-7 N1 - Corresponding author: Johannes Schildgen VL - 21 IS - 3 SP - 179 EP - 189 PB - Springer Nature ER - TY - JOUR A1 - Curbach, Janina A1 - Lander, Jonas A1 - Dierks, Marie-Luise A1 - Grepmeier, Eva-Maria A1 - von Sommoggy, Julia T1 - How do health professionals translate evidence on early childhood allergy prevention into health literacy-responsive practice? BT - A protocol for a mixed-method study on the views of German health professionals JF - BMJ OPEN N2 - Introduction Paediatricians, general practitioners (GPs) and midwives in primary care are important sources of information for parents on early childhood allergy prevention (ECAP). Research has shown that preventive counselling by health professionals can be effective in improving patients' health literacy (HL) and health behaviour. Providing effective advice relies on two factors. First, health professionals need be up-to-date with research evidence on ECAP, to consider popular misconceptions and fears and to translate this knowledge into clear recommendations for parents (knowledge translation). Second, they need to know and apply counselling techniques and create a practice setting which accommodates parental HL needs (health literacy-responsive care). The objective of this study is to explore and assess how German health professionals take up and translate ECAP evidence into appropriate recommendations for parents, how they consider HL in counselling and practice organisation and what barriers and enablers they find in their performance of HL-responsive ECAP. Methods and analysis The study has a sequential mixed-method design, in two phases. In the first phase, qualitative semi-structured expert interviews will be conducted with health professionals (paediatricians, GPs and midwives) at primary care level and professional policy level. Data collection is ongoing until January 2022. In the second phase, based on the qualitative results, a standardised questionnaire will be developed, and pilot-tested in a wider population of German health professionals. The findings of both phases will be integrated. Ethics and dissemination The study has received ethical approval from the Ethics Committee of the University of Regensburg (18-1205-101). The results will be published in international peer-reviewed open access journals and via presentations at scientific conferences. The results will also be shared with German health professionals, decision-makers and potential funders of interventions. KW - FOOD ALLERGY KW - INTERVENTION KW - MINDLINES KW - PERCEPTIONS KW - PERSPECTIVES KW - PHYSICAL-ACTIVITY KW - preventive medicine KW - PRIMARY-CARE KW - public health KW - qualitative research KW - social medicine Y1 - 2021 U6 - https://doi.org/10.1136/bmjopen-2020-047733 N1 - Corresponding author: Janina Curbach VL - 11 SP - 1 EP - 8 PB - BMJ ER - TY - JOUR A1 - Berndt, Dominik A1 - Muggli, Josef A1 - Heckel, Robert A1 - Rahiman, Mohd Fuad A1 - Lindner, Matthias A1 - Heinrich, Stephan A1 - Plöchinger, Heinz A1 - Schreiner, Rupert T1 - A Robust Miniaturized Gas Sensor for H₂ and CO₂ Detection Based on the 3ω Method JF - Sensors N2 - Gas concentration monitoring is essential in industrial or life science areas in order to address safety-relevant or process-related questions. Many of the sensors used in this context are based on the principle of thermal conductivity. The 3ω-method is a very accurate method to determine the thermal properties of materials. It has its origin in the thermal characterization of thin solid films. To date, there have been very few scientific investigations using this method to determine the thermal properties of gases and to apply it to gas measurement technology. In this article, we use two exemplary gases (H2 and CO2) for a systematical investigation of this method in the context of gas analysis. To perform our experiments, we use a robust, reliable sensing element that is already well established in vacuum measurement technology. This helix-shaped thin wire of tungsten exhibits high robustness against chemical and mechanical influences. Our setup features a compact measurement environment, where sensor operation and data acquisition are integrated into a single device. The experimental results show a good agreement with a simplified analytical model and FEM simulations. The sensor exhibits a lower detection limit of 0.62% in the case of CO2, and only 0.062% in case the of H2 at an excitation frequency of 1 Hz. This is one of the lowest values reported in literature for thermal conductivity H2 sensors. KW - 3ω-method KW - CO2 sensor KW - H2 sensor KW - thermal gas sensor Y1 - 2022 U6 - https://doi.org/10.3390/s22020485 N1 - Corresponding author: Dominik J. Berndt VL - 22 IS - 2 SP - 1 EP - 17 PB - MDPI CY - Basel ER - TY - JOUR A1 - Steininger, Peter A1 - Gaderer, Matthias A1 - Steffens, Oliver A1 - Dawoud, Belal T1 - Experimental and Numerical Study on the Heat Transfer Characteristics of a Newly-Developed Solar Active Thermal Insulation System JF - Buildings N2 - A newly-developed solar active thermal insulation system (SATIS) is introduced with the main objective to accomplish a highly-dependent total solar transmittance on the irradiation angle. SATIS is also designed to obtain the maximum transmittance at a prescribed design irradiation angle and to reduce it remarkably at higher irradiation angles. A purely mineral thermal insulation plaster with micro hollow glass spheres is applied to manufacture the investigated SATIS prototype. Light-conducting elements (LCEs) have been introduced into SATIS and suitable closing elements have been applied. The SATIS prototype has been investigated both experimentally and numerically. It turned out that the contributions of conduction, radiation and convection to the effective thermal conductivity of SATIS, without the closing elements (49 mWmK), amount to 86.2%, 13.2% and 0.6%, respectively. The angle-dependent short-wave radiation exchange within the LCE has been investigated via ray tracing. At the incidence angle of 19% (design angle), 27% of the radiation within the LCE is absorbed by the absorber plate, resulting in measured and computed total solar energy transmittances of 11.2%/11.7%, respectively. For a typical summer irradiation angle of 60%, 98% of the incident radiation is absorbed by the surfaces at the entrance of the LCE. The corresponding total solar energy transmittance amounts to 2.9%. KW - angle-dependent total solar energy transmittance KW - effective thermal conductivity KW - experimental investigation KW - numerical simulation KW - ray tracing KW - solar active thermal insulation system (SATIS) Y1 - 2021 U6 - https://doi.org/10.3390/buildings11030123 N1 - Corresponding author: Belal Dawoud VL - 11 IS - 3 SP - 1 EP - 22 PB - MDPI ER - TY - JOUR A1 - Gamisch, Bernd A1 - Gaderer, Matthias A1 - Dawoud, Belal T1 - On the Development of Thermochemical Hydrogen Storage: An Experimental Study of the Kinetics of the Redox Reactions under Different Operating Conditions JF - Applied Sciences N2 - This work aims at investigating the reduction/oxidation (redox) reaction kinetics on iron oxide pellets under different operating conditions of thermochemical hydrogen storage. In order to reduce the iron oxide pellets (90% Fe2O3, 10% stabilizing cement), hydrogen (H2) is applied in different concentrations with nitrogen (N2), as a carrier gas, at temperatures between between 700 ∘C and 900 ∘C, thus simulating the charging phase. The discharge phase is triggered by the flow of a mixture out of steam (H2O) and N2 at different concentrations in the same temperature range, resulting in the oxidizing of the previously reduced pellets. All investigations were carried out in a thermo-gravimetric analyzer (TGA) with a flow rate of 250mL/min. To describe the obtained kinetic results, a simplified analytical model, based on the linear driving force model, was developed. The investigated iron oxide pellets showed a stable redox performance of 23.8% weight reduction/gain, which corresponds to a volumetric storage density of 2.8kWh/(L bulk), also after the 29 performed redox cycles. Recalling that there is no H2 stored during the storage phase but iron, the introduced hydrogen storage technology is deemed very promising for applications in urban areas as day-night or seasonal storage for green hydrogen. KW - hydrogen storage KW - iron/iron oxide KW - reaction kinetics KW - redox reactions Y1 - 2021 U6 - https://doi.org/10.3390/app11041623 N1 - Corresponding author: Belal Dawoud VL - 11 IS - 4 SP - 1 EP - 15 PB - MDPI CY - Basel ER - TY - JOUR A1 - Prem, Nina A1 - Sindersberger, Dirk A1 - Monkman, Gareth J. T1 - Mini-Extruder for 3D Magnetoactive Polymer Printing JF - Advances in Materials Science and Engineering N2 - This work describes the development of a new miniature extruder, essential to cavity-free 3D printing of silicone-based smart materials. This makes the 3D printing of magnetoactive and electroactive polymer soft robotic components and devices directly from CAD data possible. The special feature of such an extruder is that it is designed for use with addition-crosslinking RTV-2 silicones, including solid particulate additives. The extruder merges the respective components automatically during extrusion which obviates the need for premixing and vacuum evacuation. Problems associated with inhomogeneities and unwanted cavity production are consequently eliminated. Rheological details necessary to the design, together with some preliminary performance results, are presented. Y1 - 2019 U6 - https://doi.org/10.1155/2019/8715718 N1 - Corresponding author: Gareth J. Monkman SP - 1 EP - 8 PB - HINDAWI ER - TY - JOUR A1 - Stein, Oliver T1 - On analytic properties of the standard zeta function attached to a vector-valued modular form JF - Research in Number Theory N2 - We proof a Garrett–Böcherer decomposition of a vector-valued Siegel Eisenstein series E2l,0 of genus 2 transforming with the Weil representation of Sp2(Z) on the group ring C[(L′/L)2]. We show that the standard zeta function associated to a vector-valued common eigenform f for the Weil representation can be meromorphically continued to the whole s-plane and that it satisfies a functional equation. The proof is based on an integral representation of this zeta function in terms of f and E2l,0. Y1 - 2022 U6 - https://doi.org/10.1007/s40993-022-00368-z N1 - Corresponding author: Oliver Stein VL - 8 IS - 4 SP - 1 EP - 27 PB - Springer Nature ER - TY - JOUR A1 - Dechant, Eduard A1 - Fedulov, Feodor A1 - Fetisov, Leonid Y. A1 - Shamonin (Chamonine), Mikhail T1 - Bandwidth Widening of Piezoelectric Cantilever Beam Arrays by Mass-Tip Tuning for Low-Frequency Vibration Energy Harvesting JF - Applied Science N2 - Wireless sensor networks usually rely on internal permanent or rechargeable batteries as a power supply, causing high maintenance efforts. An alternative solution is to supply the entire system by harvesting the ambient energy, for example, by transducing ambient vibrations into electric energy by virtue of the piezoelectric effect. The purpose of this paper is to present a simple engineering approach for the bandwidth optimization of vibration energy harvesting systems comprising multiple piezoelectric cantilevers (PECs). The frequency tuning of a particular cantilever is achieved by changing the tip mass. It is shown that the bandwidth enhancement by mass tuning is limited and requires several PECs with close resonance frequencies. At a fixed frequency detuning between subsequent PECs, the achievable bandwidth shows a saturation behavior as a function of the number of cantilevers used. Since the resonance frequency of each PEC is different, the output voltages at a particular excitation frequency have different amplitudes and phases. A simple power-transfer circuit where several PECs with an individual full wave bridge rectifier are connected in parallel allows one to extract the electrical power close to the theoretical maximum excluding the diode losses. The experiments performed on two- and three-PEC arrays show reasonable agreement with simulations and demonstrate that this power-transfer circuit additionally influences the frequency dependence of the harvested electrical power. KW - array KW - BAND-PASS FILTERS KW - bandwidth KW - BIMORPH KW - Optimization KW - OUTPUT KW - PERFORMANCE KW - piezoelectric cantilever KW - POWER KW - vibration energy harvesting Y1 - 2017 U6 - https://doi.org/10.3390/app7121324 N1 - Corresponding Author: Mikhail Shamonin VL - 7 IS - 12 PB - MDPI ER - TY - JOUR A1 - Frikel, Jürgen A1 - Haltmeier, Markus T1 - Efficient regularization with wavelet sparsity constraints in photoacoustic tomography JF - Inverse Problems N2 - In this paper, we consider the reconstruction problem of photoacoustic tomography (PAT) with a flat observation surface. We develop a direct reconstruction method that employs regularization with wavelet sparsity constraints. To that end, we derive a wavelet-vaguelette decomposition (WVD) for the PAT forward operator and a corresponding explicit reconstruction formula in the case of exact data. In the case of noisy data, we combine the WVD reconstruction formula with soft-thresholding, which yields a spatially adaptive estimation method. We demonstrate that our method is statistically optimal for white random noise if the unknown function is assumed to lie in any Besov-ball. We present generalizations of this approach and, in particular, we discuss the combination of PAT-vaguelette soft-thresholding with a total variation (TV) prior. We also provide an efficient implementation of the PAT-vaguelette transform that leads to fast image reconstruction algorithms supported by numerical results. KW - Image reconstruction KW - photoacoustic tomography KW - sparsity constraints KW - variational regularization KW - wavelet-vaguelette decomposition Y1 - 2018 U6 - https://doi.org/10.1088/1361-6420/aaa0ac N1 - Corresponding authors: Jürgen Frikel and Markus Haltmeier VL - 34 IS - 2 SP - 1 EP - 28 ER - TY - JOUR A1 - Diamantidis, Dimitris T1 - A Critical View on Environmental and Human Risk Acceptance Criteria JF - International Journal of Environmental Science and Development N2 - Natural and technological hazards have a major impact on environmental and human safety. Risk assessment plays an essential role in the risk management of the effects of such hazards. This contribution summarizes first the general formulation of risk depending on two parameters: hazard probability and associated consequences. Problems faced in industrial applications based on the experience of the author are discussed. Risk acceptance criteria for the contributors to risk i.e. human, economic and environment are critically reviewed. Resilience based criteria are also included and conclusions for future developments are provided. KW - Environmental risk KW - human risk KW - Risk acceptance KW - Risk analysis KW - safety measures Y1 - 2017 U6 - https://doi.org/10.18178/ijesd.2017.8.1.921 N1 - Corresponding author: Dimitris Diamantidis VL - 8 IS - 1 SP - 62 EP - 66 ER - TY - JOUR A1 - Franz, Maja A1 - Wolf, Lucas A1 - Periyasamy, Maniraman A1 - Ufrecht, Christian A1 - Scherer, Daniel D. A1 - Plinge, Axel A1 - Mutschler, Christopher A1 - Mauerer, Wolfgang T1 - Uncovering Instabilities in Variational-Quantum Deep Q-Networks JF - Journal of the Franklin Institute N2 - Deep Reinforcement Learning (RL) has considerably advanced over the past decade. At the same time, state-of-the-art RL algorithms require a large computational budget in terms of training time to converge. Recent work has started to approach this problem through the lens of quantum computing, which promises theoretical speed-ups for several traditionally hard tasks. In this work, we examine a class of hybrid quantumclassical RL algorithms that we collectively refer to as variational quantum deep Q-networks (VQ-DQN). We show that VQ-DQN approaches are subject to instabilities that cause the learned policy to diverge, study the extent to which this afflicts reproduciblity of established results based on classical simulation, and perform systematic experiments to identify potential explanations for the observed instabilities. Additionally, and in contrast to most existing work on quantum reinforcement learning, we execute RL algorithms on an actual quantum processing unit (an IBM Quantum Device) and investigate differences in behaviour between simulated and physical quantum systems that suffer from implementation deficiencies. Our experiments show that, contrary to opposite claims in the literature, it cannot be conclusively decided if known quantum approaches, even if simulated without physical imperfections, can provide an advantage as compared to classical approaches. Finally, we provide a robust, universal and well-tested implementation of VQ-DQN as a reproducible testbed for future experiments. KW - Artificial Intelligence KW - Computer Science KW - Quantum Physics Y1 - 2022 U6 - https://doi.org/10.1016/j.jfranklin.2022.08.021 SN - 0016-0032 N1 - Corresponding author: Maja Franz PB - Elsevier ET - In Press, Corrected Proof ER - TY - JOUR A1 - Schloplocher, Paul Dragos A1 - Ettengruber, Stefan A1 - Steffens, Oliver T1 - Improvements for building-performance simulations by a comparative finite-element method analysis JF - Energy and Buildings N2 - This paper presents a method to improve building-performance simulations (BPS) by the comparison and analysis of different approaches based on finite-element method (FEM) models. The lumped parameter method (LPM) is used in several BPS programs and tools. It has the advantage of fast computing times and comparably good accuracy for thermal and energy loads. With the help of detailed FEM simulations, it is possible to further improve the degree of detail and accuracy while maintaining the high simulation speed. In this work, we compare time-dependent results for local temperatures in a generic reference room within a given periode of time. In a second step, the differences between the models with respect to various physical effects are analyzed and used to introduce additional equations into the LPM model in order to improve its accuracy. Thus, we discuss potentials for improvement for BPS and demonstrate a method of a practical implementation. The results show minor differences of less than 0.1 K for radiation and heat transfer, so their level of detail in BPS is appropriate. In these terms, no improvements were pursued within the work. However, the FEM simulation is capable of calculating the internal convective heat transfer and thermal bridges more accurately due to the use of computational fluid dynamics (CFD) and the geometrically precise representation of the FEM model. Here, deviations of up to 1 K in room temperature (convective heat transfer) and up to 0.5 K in wall temperatures (thermal bridges) were pointed out. By improving the LPM with equations obtained from the FEM, these deviations can be reduced to less than 0.2 K, which is a considerable improvement in accuracy. KW - Lumped parameter model KW - Finite-element method KW - Building performance simulation Y1 - 2023 U6 - https://doi.org/10.1016/j.enbuild.2022.112563 N1 - Corresponding author: Dragos Paul Schoplocher VL - 278 SP - 1 EP - 12 PB - Elsevier ER - TY - JOUR A1 - Maiwald, Frederik A1 - Roider, Clemens A1 - Schmidt, Michael A1 - Hierl, Stefan T1 - Optical Coherence Tomography for 3D Weld Seam Localization in Absorber-Free Laser Transmission Welding JF - Applied Sciences N2 - Quality and reliability are of the utmost importance for manufacturing in the optical and medical industries. Absorber-free laser transmission welding enables the precise joining of identical polymers without additives or adhesives and is well-suited to meet the demands of the aforementioned industries. To attain sufficient absorption of laser energy without absorbent additives, thulium fiber lasers, which emit in the polymers’ intrinsic absorption spectrum, are used. Focusing the laser beam with a high numerical aperture provides significant intensity gradients inside the workpiece and enables selective fusing of the internal joining zone without affecting the surface of the device. Because seam size and position are crucial, the high-quality requirements demand internal weld seam monitoring. In this work, we propose a novel method to determine weld seam location and size using optical coherence tomography. Changes in optical material properties because of melting and re-solidification during welding allow for weld seam differentiation from the injection-molded base material. Automatic processing of the optical coherence tomography data enables the identification and measurement of the weld seam geometry. The results from our technique are consistent with microscopic images of microtome sections and demonstrate that weld seam localization in polyamide 6 is possible with an accuracy better than a tenth of a millimeter. KW - image processing KW - laser transmission welding KW - optical coherence tomography KW - process monitoring KW - transparent polymers Y1 - 2022 U6 - https://doi.org/10.3390/app12052718 N1 - Corresponding author: Frederik Maiwald VL - 12 IS - 5 SP - 1 EP - 11 PB - MPDI CY - Basel ER - TY - JOUR A1 - Kreitmeier, Florian A1 - Chashin, Dmitri V. A1 - Fetisov, Yuri K. A1 - Fetisov, Leonid Y. A1 - Schulz, Irene A1 - Monkman, Gareth J. A1 - Shamonin (Chamonine), Mikhail T1 - Nonlinear Magnetoelectric Response of Planar Ferromagnetic-Piezoelectric Structures to Sub-Millisecond Magnetic Pulses JF - Sensors N2 - The magnetoelectric response of bi- and symmetric trilayer composite structures to pulsed magnetic fields is experimentally investigated in detail. The structures comprise layers of commercially available piezoelectric (lead zirconate titanate) and magnetostrictive (permendur or nickel) materials. The magnetic-field pulses have the form of a half-wave sine function with duration of 450 µs and amplitudes ranging from 500 Oe to 38 kOe. The time dependence of the resulting voltage is presented and explained by theoretical estimations. Appearance of voltage oscillations with frequencies much larger than the reciprocal pulse length is observed for sufficiently large amplitudes (~1-10 kOe) of the magnetic-field pulse. The origin of these oscillations is the excitation of bending and planar acoustic oscillations in the structures. Dependencies of the magnetoelectric voltage coefficient on the excitation frequency and the applied magnetic field are calculated by digital signal processing and compared with those obtained by the method of harmonic field modulation. The results are of interest for developing magnetoelectric sensors of pulsed magnetic fields as well as for rapid characterization of magnetoelectric composite structures. Y1 - 2012 U6 - https://doi.org/10.3390/s121114821 N1 - Corresponding author: Mikhail Shamonin VL - 12 IS - 11 SP - 14821 EP - 14837 PB - MDPI CY - Basel ER - TY - JOUR A1 - Apelsmeier, Andreas A1 - Gleixner, Ramona A1 - Mayer, Matthias A1 - Shamonin (Chamonine), Mikhail A1 - Schmauss, Bernhard T1 - Intensity referencing in an extrinsic optical fiber temperature sensor JF - Procedia Engineering N2 - Optical fiber sensors based on intensity measurement require some form of intensity referencing to avoid errors arising from parasitic losses. Known techniques of referencing such as balanced bridge, divided beam systems or two-wavelength referencing are not suitable for low-cost applications since they use relatively complicated optical components such as multiple LED sources, couplers, filters etc. In this work a novel method of referencing in an extrinsic optical fiber sensor system utilizing temperature dependence of absorption edge in a semiconductor crystal is described. The sensor system comprises a single LED source and no optical fiber junctions. The emission spectrum of an LED depends on its temperature. The reference is provided by controlling the temperature of an LED source and transmission measurements with different emission spectra. The entire process is controlled by a microprocessor unit. Performance of a sensor system is investigated and it is shown that the losses in connectors may be compensated for. KW - Extrinsic optical fiber sensor KW - Intensity referencing KW - Temperature measurement KW - Absorption edge KW - Semiconductor KW - Hot-spot measurement Y1 - 2010 U6 - https://doi.org/10.1016/j.proeng.2010.09.301 VL - 5 SP - 1095 EP - 1098 PB - Elsevier ER - TY - JOUR A1 - Monkman, Gareth J. A1 - Sindersberger, Dirk A1 - Prem, Nina A1 - Szecsey, Tamara T1 - Smart Stiction JF - Robotics & Automation Engineering Journal N2 - Soft robotics could loosely be described as the engineering science of expanded dexterity through controllable flexibility. The exploitation of controllable compliance through the judicious choice of soft flexible members, as opposed to a finite number of rigid kinematic joints, can result in greater dexterity without compromising simplicity. One example is the replacement of segmented mechanical legs with simple compliant material eruciform prolegs. To achieve this in robotics, without introducing additional mechanical joints, mobile surfaces with switchable coefficients of friction is essential. This paper explains how, using silicone based smart materials, the rapid alternation between kinematic and static friction (stiction) may be achieved. Y1 - 2019 U6 - https://doi.org/10.19080/RAEJ.2019.04.555641 N1 - Corresponding author: Gareth J. Monkman VL - 4 IS - 4 PB - Juniper Publishers ER - TY - JOUR A1 - Herrmann, Frank T1 - Human Experience Versus Rule Decision at Krones AG JF - Biomedical Journal of Scientific & Technical Research N2 - Final assembly at Krones AG must make the best possible use of its production space and meeting the specified customer due dates is critical. Via a self developed simulation tool, the present scheduling procedure is compared with the one by priority rule shortest slack. As a consequence slack should have a higher importance in the planning KW - Simulation of Scheduling KW - Tardiness KW - Unused Area Y1 - 2022 UR - https://biomedres.us/pdfs/BJSTR.MS.ID.006691.pdf U6 - https://doi.org/10.26717/BJSTR.2022.42.006691 SN - 2574 -1241 N1 - Corressponding author: Frank Herrmann VL - 42 IS - 1 SP - 33255 EP - 33260 PB - Biomedical Research Network+ ER - TY - JOUR A1 - Göppel, Simon A1 - Frikel, Jürgen A1 - Haltmeier, Markus T1 - Data-Proximal Complementary ℓ1-TV Reconstruction for Limited Data Computed Tomography JF - Mathematics N2 - In a number of tomographic applications, data cannot be fully acquired, resulting in severely underdetermined image reconstruction. Conventional methods in such cases lead to reconstructions with significant artifacts. To overcome these artifacts, regularization methods are applied that incorporate additional information. An important example is TV reconstruction, which is known to be efficient in compensating for missing data and reducing reconstruction artifacts. On the other hand, tomographic data are also contaminated by noise, which poses an additional challenge. The use of a single regularizer must therefore account for both the missing data and the noise. A particular regularizer may not be ideal for both tasks. For example, the TV regularizer is a poor choice for noise reduction over multiple scales, in which case ℓ1 curvelet regularization methods are well suited. To address this issue, in this paper, we present a novel variational regularization framework that combines the advantages of different regularizers. The basic idea of our framework is to perform reconstruction in two stages. The first stage is mainly aimed at accurate reconstruction in the presence of noise, and the second stage is aimed at artifact reduction. Both reconstruction stages are connected by a data proximity condition. The proposed method is implemented and tested for limited-view CT using a combined curvelet–TV approach. We define and implement a curvelet transform adapted to the limited-view problem and illustrate the advantages of our approach in numerical experiments. KW - image reconstruction KW - limited data KW - artifact reduction KW - sparse regularization KW - total variation KW - wedge-adapted curvelets Y1 - 2024 U6 - https://doi.org/10.3390/math12101606 SN - 2227-7390 N1 - Corresponding author der OTH Regensburg: Jürgen Frikel (und Markus Haltmeier) VL - 12 IS - 10 PB - MDPI ER - TY - JOUR A1 - Mikhaeil, Makram A1 - Gaderer, Matthias A1 - Dawoud, Belal T1 - On the development of an innovative adsorber plate heat exchanger for adsorption heat transformation processes; an experimental and numerical study JF - Energy N2 - An innovative adsorber plate heat exchanger (APHE), which is developed for application in adsorption heat pumps, chillers and thermal energy storage systems, is introduced. A test frame has been constructed as a representative segment of the introduced APHE for applying loose grains of AQSOA-Z02. Adsorption kinetic measurements have been carried out in a volumetric large-temperature-jump setup under typical operating conditions of adsorption processes. A transient 2-D model is developed for the tested sample inside the setup. The measured temporal uptake variations with time have been fed to the model, through which a micro-pore diffusion coefficient at infinite temperature of 2 E−4 [m2s−1] and an activation energy of 42.1 [kJ mol−1] have been estimated. A 3-D model is developed to simulate the combined heat and mass transfer inside the APHE and implemented in a commercial software. Comparing the obtained results with the literature values for an extruded aluminium adsorber heat exchanger coated with a 500 μm layer of the same adsorbent, the differential water uptake obtained after 300 s of adsorption (8.2 g/100 g) implies a sound enhancement of 310%. This result proves the great potential of the introduced APHE to remarkably enhance the performance of adsorption heat transformation appliances. KW - Adsorber heat exchanger KW - Plate heat exchanger KW - Adsorption kinetics KW - Dynamic simulation Y1 - 2020 U6 - https://doi.org/10.1016/j.energy.2020.118272 N1 - Corresponding author: Belal Dawoud VL - 207 IS - September SP - 1 EP - 13 PB - Elsevier ER - TY - JOUR A1 - Huber, Lea A1 - Heindl, Melanie A1 - Schlosser, Marc A1 - Pfitzner, Arno A1 - Dawoud, Belal T1 - On the Cycle Stability and Macroscopic Structure of Iron Oxide Pellets for Thermochemical Hydrogen Storage: Influence of Water Content during the Pelletizing Process JF - Applied Sciences N2 - Hydrogen storage based on the repeated reduction and oxidation (redox) reactions of iron oxide/iron composites represents a promising technology. This work is dedicated to studying the influence of the amount of water added during the pelletizing process on the cycle stability and structure of iron oxide pellets. The storage composites were prepared from iron oxide (Fe2O3) and 10 wt.-% support material (cement) with different amounts of water (18 and 33 wt.-%) in a laboratory-scale pelletizing disk. To evaluate the cycle stability of the composites, the kinetics of the redox reactions were experimentally measured at 800 ∘ C in an atmosphere of 50% N2 and 50% H2 (reduction) or 50% steam (oxidation), respectively. Moreover, the structure of the pellets was analyzed by micro-computed tomography scans. It turned out that pellets with higher water contents attained faster kinetics and a higher cycle stability. The sample with the least water content (18 wt.-%) needed about 26 min and 19 min to reach a conversion rate of 80% during the reduction and oxidation reactions of the sixth redox cycle, respectively. In contrast, the sample with the highest water content (33 wt.-%) could achieve the same conversion rate after 18 min (reduction) and 13 min (oxidation) during the ninth redox cycle. KW - hydrogen storage KW - redox reactions KW - iron/iron oxide KW - pelletizing process KW - cycle stability KW - water content Y1 - 2023 U6 - https://doi.org/10.3390/app13116408 N1 - Corresponding author: Belal Dawoud VL - 13 IS - 11 PB - MDPI CY - 16 ER - TY - JOUR A1 - Schiek, Roland T1 - Nonlinear refractive index in silica glass JF - Optical Materials Expres N2 - The third-order nonlinear susceptibility of silica glass is measured via self-phase modulation in standard single mode fibers at a wavelength of 1550 nm. To minimize the influence of polarization state changes along the propagation only meter-long fibers were investigated. With pulse durations of picoseconds a quasi-instantaneous nonlinearity with ultrafast electronic and fast nuclear-vibration contributions produces under conditions of negligible dispersion a classic and clean nonlinear phase shift following exactly the shape of the pulse power. The complex pulse envelope was retrieved from frequency optical gating spectrograms. The nonlinear fiber parameter γ could be determined with an accuracy of 3.7 percent. Considering the mode field structure and the doping influence the nonlinear refractive index of silica glass as the fiber base material was found to be n 2 =2.22⋅10 −16 cm 2 W±6.0% for picosecond-long pulses. Comparing nonlinear phase shifts from linear and circular polarized light a nuclear-vibration contribution to the cubic fiber nonlinearity of 25 percent was estimated. Y1 - 2023 U6 - https://doi.org/10.1364/ome.489520 N1 - Corresponding author: Roland Schiek VL - 13 IS - 6 SP - 1727 EP - 1740 PB - Optica ER - TY - JOUR A1 - Romano, Marco A1 - Ehrlich, Ingo T1 - Classification of damping properties of fabric-reinforced flat beam-like specimens by a degree of ondulation implying a mesomechanic kinematic JF - Science and Engineering of Composite Materials N2 - In order to determine the influence of the ondulations in fabrics on the damping properties of fiber-reinforced plastics, the structural dynamic properties of fabric- and unidirectionally reinforced plastics are investigated. The free decay behavior of flat beam-like specimens is investigated under fixed-free boundary conditions. As the material damping is consistently higher in fabric-reinforced specimens compared to unidirectionally reinforced ones, a contribution of an additionally acting mesomechanic kinematic in fabric weaves is implied. Based on a degree of ondulation, it is possible to classify the enhancement of the material damping and determine the corresponding energy dissipation. The study provides valuable quantitative relations of the additional damping effect due to the mesomechanic kinematic. Compared to the unidirectionally reinforced material, plain weave enhances the material damping by 37…52% at ˜OPL=0.0133 , whereas twill weave 2/2 enhances it by 31…40% at ˜OT2=0.0098 . The consideration of the findings contributes to a deeper understanding of the visco-elastic dynamic behavior of fabric-reinforced plastics and allows further applications in research, development, and industry. KW - fiber-reinforced plastics KW - mesomechanic scale KW - fabric-reinforced layer KW - ondulation Y1 - 2024 U6 - https://doi.org/10.1515/secm-2024-0019 SN - 2191-0359 SN - 0792-1233 N1 - Corresponding author der OTH Regensburg: Marco Romano VL - 31 IS - 1 PB - Walter de Gruyter GmbH ER - TY - JOUR A1 - Steininger, Peter A1 - Gaderer, Matthias A1 - Dawoud, Belal T1 - Assessment of the Annual Transmission Heat Loss Reduction of a Refurbished Existing Building with an Advanced Solar Selective Thermal Insulation System JF - Sustainability N2 - A numerical parameter sensitivity analysis of the design parameters of the recently published solar selective thermal insulation system (SATIS) has been carried out to enhance its thermal and optical properties. It turned out that the insulation properties of SATIS can be effectively improved by reducing the length of the glass closure element. Increasing the area share of the light conducting elements (LCEs) and decreasing their length-to-diameter (L/D) ratio were identified as key parameters in order to increase the solar gain. Two SATIS variants were compared with the same wall insulation without SATIS in a yearly energetic performance assessment. The SATIS variant with 10 mm length of the closure element, 44.2% area share of LCE, as well as front and rear diameters of 12 mm/9 mm shows an 11.8% lower transmission heat loss over the heating period than the wall insulation without SATIS. A new methodology was developed to enable the implementation of the computed solar gains of SATIS in 1D simulation tools. The result is a radiant heat flow map for integration as a heat source in 1D simulation models. A comparison between the 1D and 3D models of the inside wall heat fluxes showed an integral yearly agreement of 98%. KW - effective thermal conductivity KW - parameter sensitivity analysis KW - radiant heat flow map KW - solar selective thermal insulation system (SATIS) KW - total solar energy transmittance KW - yearly energetic performance assessment Y1 - 2021 U6 - https://doi.org/10.3390/su13137336 N1 - Corresponding author: Belal Dawoud VL - 13 IS - 13 SP - 1 EP - 19 PB - MDPI CY - Basel ER - TY - JOUR A1 - Sindersberger, Dirk A1 - Prem, Nina A1 - Monkman, Gareth J. T1 - Structure formation in low concentration magnetoactive polymers JF - AIP advances N2 - This paper concerns recent research into the autonomous formation of micro-structures in low carbonyl iron powder (CIP) concentration magneto active polymers (MAP). Higher concentrations of CIP show an isotropic distribution of magnetic filler throughout the entire sample, while autonomous structure formation is possible at mass concentrations lower than 3%. The formation of micro-toroids commences as CIP concentration approaches 1% wt. Further development of coherent rings with a defined order follow as CIP concentrations increase toward 2% wt, whilst exceeding 3% wt leads to the same isotropic distribution found in higher concentration MAP. Structured samples containing between 1% wt and 3% wt CIP were investigated using X-Ray tomography where solitary structures could clearly be observed. The ring structures represent microinductivities whose geometries can be manipulated during fabrication. In addition, these structures are magnetic field sensitive. This is not only relevant to applications in the GHz and THz areas but recent research has revealed implications for optical, thermal, acoustic and even chemical MAP sensors. (C) 2019 Author(s). Y1 - 2019 U6 - https://doi.org/10.1063/1.5079997 N1 - Corresponding author: Dirk Sindersberger VL - 9 IS - 3 PB - AIP Publishing ER - TY - JOUR A1 - Sterner, Michael A1 - Bauer, Franz T1 - Power-to-X im Kontext der Energiewende und des Klimaschutzes in Deutschland JF - Chemie-Ingenieur-Technik N2 - Um den Einfluss verschiedener Power-to-X-Verfahren auf die Transformation des deutschen Energiesystems und das Erreichen der Klimaschutzziele zu überprüfen, wurde ein sektorübergreifendes Energiesystemmodel entwickelt. Die daraus gewonnenen Ergebnisse zeigen: Für eine erfolgreiche Energiewende ist der Einsatz von Power-to-X in Zukunft unverzichtbar. Vor allem in Bereichen und Sektoren, in denen hohe Energiedichten erforderlich und nur wenig andere Optionen zur Defossilisierung vorhanden sind, werden Power-to-X-Technologien zwingend notwendig. T2 - Power-to-X in Context of Energy Transition and Climate Change Mitigation in Germany KW - Power-to-Gas KW - Climate mitigation KW - Energy system KW - Modeling KW - Power-to-X KW - Klimaschutz KW - Energiewende Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-11669 SN - 0009-286X N1 - Corresponding author: Franz Bauer VL - 92 IS - 1-2 SP - 85 EP - 90 PB - Wiley ER - TY - JOUR A1 - Kloiber, Jessica A1 - Schultheiß, Ulrich A1 - Sotelo, Lamborghini A1 - Sarau, George A1 - Christiansen, Silke H. A1 - Gavras, Sarkis A1 - Hort, Norbert A1 - Hornberger, Helga T1 - Corrosion behaviour of electropolished magnesium materials JF - Materials Today Communications N2 - Although magnesium and its alloys are promising candidates as biodegradable implant materials, the tendency for localized corrosion mechanism in physiological environment limit their biomedical application. Electropolishing is an attractive strategy for improving the corrosion behaviour of metals, but it is still largely unexplored in magnesium materials. In this study, the characterization of electropolished surfaces of AM50 and pure magnesium was performed, focussing on their in vitro degradation behaviour in cell medium. Corrosion rates were evaluated using potentiodynamic polarisation. The surface morphology before and after the onset of corrosion was investigated by scanning electron microscopy and confocal laser scanning microscopy. The presented electropolishing process led to improved surface performances, observable by significantly lower corrosion rates (0.08 mm·year-1 in Dulbecco's modified Eagle's medium), lower arithmetical mean height (0.05 µm), lower water contact angle (25-35°) and lower micro hardness (35-50 HV 0.1) compared to mechanically and chemically treated surfaces. MgO/Mg(OH)2 could be detected on electropolished surfaces. The localized corrosion mode could be reduced, but not entirely prevented. Electropolishing shows great potential as post-treatment of magnesium-based components, but detailed tests of the long-term corrosion behaviour are an important area of future research. KW - biomedical application KW - corrosion behaviour KW - electropolishing KW - magnesium alloy KW - pure magnesium KW - surface characterization Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-68254 N1 - Corresponding author: Helga Hornberger PB - Elsevier ET - Journal Pre-proof ER - TY - JOUR A1 - Thema, Martin A1 - Bauer, Franz A1 - Sterner, Michael T1 - Power-to-Gas: Electrolysis and methanation status review JF - Renewable and Sustainable Energy Reviews N2 - This review gives a worldwide overview on Power-to-Gas projects producing hydrogen or renewable substitute natural gas focusing projects in central Europe. It deepens and completes the content of previous reviews by including hitherto unreviewed projects and by combining project names with details such as plant location. It is based on data from 153 completed, recent and planned projects since 1988 which were evaluated with regards to plant allocation, installed power development, plant size, shares and amounts of hydrogen or substitute natural gas producing examinations and product utilization phases. Cost development for electrolysis and carbon dioxide methanation was analyzed and a projection until 2030 is given with an outlook to 2050. The results show substantial cost reductions for electrolysis as well as for methanation during the recent years and a further price decline to less than 500 euro per kilowatt electric power input for both technologies until 2050 is estimated if cost projection follows the current trend. Most of the projects examined are located in Germany, Denmark, the United States of America and Canada. Following an exponential global trend to increase installed power, today's Power-to-Gas applications are operated at about 39 megawatt. Hydrogen and substitute natural gas were investigated on equal terms concerning the number of projects. KW - Biological CO2-Methanation KW - Chemical CO2-Methanation KW - Cost-development KW - Electrolysis KW - Power-to-Gas Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-26238 N1 - Corresponding author: Martin Thema VL - 112 IS - 7 SP - 775 EP - 787 PB - Elsevier ER - TY - JOUR A1 - Sterner, Michael A1 - Hofrichter, Andreas A1 - Meisinger, Alexander A1 - Bauer, Franz A1 - Pinkwart, Karsten A1 - Maletzko, Annabelle A1 - Dittmar, Felix A1 - Cremers, Carsten T1 - 19 Import options for green hydrogen and derivatives - An overview of efficiencies and technology readiness levels JF - International Journal of Hydrogen Energy N2 - The import of hydrogen and derivatives forms part of many national strategies and is fundamental to achieving climate protection targets. This paper provides an overview and technical comparison of import pathways for hydrogen and derivatives in terms of efficiency, technological maturity and development and construction times with a focus on the period up to 2030. The import of hydrogen via pipeline has the highest system efficiency at 57-67 % and the highest technological maturity with a technology readiness level (TRL) of 8-9. The import of ammonia and methanol via ship and of SNG via pipeline shows efficiencies in the range of 39-64 % and a technological maturity of TRL 7 to 9 when using point sources. Liquid hydrogen, LOHC and Fischer-Tropsch products have the lowest efficiency and TRL in comparison. The use of direct air capture (DAC) reduces efficiency and TRL considerably. Reconversion of the derivatives to hydrogen is also associated with high losses and is not achievable for all technologies on an industrial scale up to 2030. In the short to medium term, import routes for derivatives that can utilise existing infrastructures and mature technologies are the most promising for imports. In the long term, the most promising option is hydrogen via pipelines. KW - Hydrogen KW - Derivatives KW - Power-to-X KW - Efficiency KW - TRL KW - Construction time KW - Technical assessment KW - Import KW - Hydrogen strategy KW - Energy system modelling Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-77756 SN - 0360-3199 N1 - Corresponding author der OTH Regensburg: Michael Sterner VL - 90 SP - 1112 EP - 1127 PB - Elsevier ER - TY - JOUR A1 - Kovalev, Alexander A1 - Belyaeva, Inna A. A1 - von Hofen, Christian A1 - Gorb, Stanislav A1 - Shamonin (Chamonine), Mikhail T1 - Magnetically Switchable Adhesion and Friction of Soft Magnetoactive Elastomers JF - Advanced Engineering Materials N2 - Herein, the effect of an applied moderate (~240 mT) magnetic field on the work of adhesion (WoA) of mechanically soft (the shear modulus ~10 kPa) magnetoactive elastomer (MAE) samples with two different mass fractions (70 and 80 wt%) of carbonyl iron powder (CIP) is concerned. The unfilled elastomer sample is used for comparison. Due to some sedimentation of filling particles, the concentration of inclusions in thin (~10 μm) subsurface layers is different. It is shown that the WoA increases (up to 1.8-fold) on the particle-enriched side (PES) in the magnetic field and its value is higher for higher filler concentration. On the particle-depleted side (PDS), WoA does not depend on particle concentration and on the magnetic field. Adhesion and friction are coupled in MAEs. No statistically significant difference in the friction coefficient, determined from the extended Amontons´ law, depending on sample side, CIP concentration, or presence of magnetic field is found. However, the PDS in the magnetic field demonstrates significantly higher critical shear stress compared to that for the PES or PDS in the absence of magnetic field. Correlations between different surface properties are discussed. Obtained results are useful for the development of magnetically controllable soft robots. Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-45283 N1 - Corresponding authors: Stanislav Gorb und Mikhail Shamonin VL - 24 IS - 10 SP - 1 EP - 8 PB - WILEY-VCH ER - TY - JOUR A1 - Bartsch, Alexander A1 - Beham, Daniela A1 - Gebhardt, Jakob A1 - Ehrlich, Ingo A1 - Schratzenstaller, Thomas A1 - Monkman, Gareth J. T1 - Mechanical Properties of NdPrFeB Based Magnetoactive Bisphenol-Free Boron-Silicate Polymers JF - Journal of Nanomedicine and Nanotechnology N2 - Following a ban on many materials containing bisphenol-A, new bisphenol-free Boron silicates have been found as substitutes. The purpose of this study is to describe the mechanical properties of these bisphenol-free magnetoactive borosilicate polymers containing hard magnetic particles. Samples of 0%, 33% and 66% by wt. were loaded for compression using a universal testing machine. The maximum forces occurring for different travel speeds were compared before and after post-magnetization treatments. The post-magnetization included 2 stages. In addition, the change in mechanical properties within 24 hours after the post-magnetization process was investigated. Furthermore, the influence of speed and particle content were investigated. In general, there is a correlation between the required compressive force and, the level of post-magnetization stress, the increase in travel speed and particle content in the boron silicate. Comparison of the non-post-magnetized and post-magnetized samples using two-tailed t-tests shows that the p-values for all weight fraction changes in NdPrFeB particles and travel speeds are less than 0.001. Also, a comparison between tests in which the traverse speed was varied also showed significant changes in the resulting compression forces. The same is valid for changes in the weight ratio of the NdPrFeB particles in the samples. For post-magnetized samples, no significant difference can be observed in the first 24 hours following magnetization. In summary, the material presents viscoelastic, plastic force-displacement behavior, which can be well recognized by its bi-linear curve shape. The investigation shows that borosilicate polymers based on NdPrFeB can have their mechanical behavior modified and controlled by post-magnetization processes. This opens new possibilities for many future applications. Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-67425 UR - https://www.walshmedicalmedia.com/open-access/mechanical-properties-of-ndprfeb-based-magnetoactive-bisphenolfree-boronsilicate-polymers-124385.html SN - 2157-7439 N1 - Corresponding author: Alexander Bartsch VL - 14 IS - 6 PB - Walsh Medical Media ER - TY - JOUR A1 - Glavan, Gašper A1 - Belyaeva, Inna A. A1 - Shamonin (Chamonine), Mikhail T1 - On the Piezomagnetism of Magnetoactive Elastomeric Cylinders in Uniform Magnetic Fields: Height Modulation in the Vicinity of an Operating Point by Time-Harmonic Fields JF - Polymers N2 - Soft magnetoactive elastomers (MAEs) are currently considered to be promising materials for actuators in soft robotics. Magnetically controlled actuators often operate in the vicinity of a bias point. Their dynamic properties can be characterized by the piezomagnetic strain coefficient, which is a ratio of the time-harmonic strain amplitude to the corresponding magnetic field strength. Herein, the dynamic strain response of a family of MAE cylinders to the time-harmonic (frequency of 0.1-2.5 Hz) magnetic fields of varying amplitude (12.5 kA/m-62.5 kA/m), superimposed on different bias magnetic fields (25-127 kA/m), is systematically investigated for the first time. Strain measurements are based on optical imaging with sub-pixel resolution. It is found that the dynamic strain response of MAEs is considerably different from that in conventional magnetostrictive polymer composites (MPCs), and it cannot be described by the effective piezomagnetic constant from the quasi-static measurements. The obtained maximum values of the piezomagnetic strain coefficient (∼102 nm/A) are one to two orders of magnitude higher than in conventional MPCs, but there is a significant phase lag (35-60°) in the magnetostrictive response with respect to an alternating magnetic field. The experimental dependencies of the characteristics of the alternating strain on the amplitude of the alternating field, bias field, oscillation frequency, and aspect ratio of cylinders are given for several representative examples. It is hypothesized that the main cause of observed peculiarities is the non-linear viscoelasticity of these composite materials. Y1 - 2024 U6 - https://doi.org/10.3390/polym16192706 N1 - Corresponding author der OTH Regensburg: Gašper Glavan VL - 16 IS - 19 ER - TY - JOUR A1 - Glavan, Gašper A1 - Kettl, Wolfgang A1 - Brunhuber, Alexander A1 - Shamonin (Chamonine), Mikhail A1 - Drevenšek‐Olenik, Irena T1 - Effect of Material Composition on Tunable Surface Roughness of Magnetoactive Elastomers JF - Polymers N2 - We investigated magnetic-field-induced modifications of the surface roughness of magnetoactive elastomers (MAEs) with four material compositions incorporating two concentrations of ferromagnetic microparticles (70 wt% and 80 wt%) and exhibiting two shear storage moduli of the resulting composite material (about 10 kPa and 30 kPa). The analysis was primarily based on spread optical reflection measurements. The surfaces of all four materials were found to be very smooth in the absence of magnetic field (RMS roughness below 50 nm). A maximal field-induced roughness modification (approximately 1 m/T) was observed for the softer material with the lower filler concentration, and a minimal modification (less than 50 nm/T) was observed for the harder material with the higher filler concentration. All four materials showed a significant decrease in the total optical reflectivity with an increasing magnetic field as well. This effect is attributed to the existence of a distinct surface layer that is depleted of microparticles in the absence of a magnetic field but becomes filled with particles in the presence of the field. We analyzed the temporal response of the reflective properties to the switching on and off of the magnetic field and found switching-on response times of around 0.1 s and switching-off response times in the range of 0.3-0.6 s. These observations provide new insight into the magnetic-field-induced surface restructuring of MAEs and may be useful for the development of magnetically reconfigurable elastomeric optical surfaces. KW - magnetically tunable surface reflectivity KW - magnetically tunable surface roughness KW - magnetorheological elastomer KW - magnetorheological polymers KW - surface properties Y1 - 2019 U6 - https://doi.org/10.3390/polym11040594 N1 - Corresponding author: Gašper Glavan VL - 11 IS - 4 SP - 1 EP - 13 PB - MDPI CY - Basel ER - TY - JOUR A1 - Förstl, Nikolas A1 - Süß, Franz A1 - Englert, Carsten A1 - Dendorfer, Sebastian T1 - Design of a reverse shoulder implant to measure shoulder stiffness during implant component positioning JF - Medical Engineering & Physics N2 - To avoid dislocation of the shoulder joint after reverse total shoulder arthroplasty, it is important to achieve sufficient shoulder stability when placing the implant components during surgery. One parameter for assessing shoulder stability can be shoulder stiffness. The aim of this research was to develop a temporary reverse shoulder implant prototype that would allow intraoperative measurement of shoulder stiffness while varying the position of the implant components. Joint angle and torque measurement techniques were developed to determine shoulder stiffness. Hall sensors were used to measure the joint angles by converting the magnetic flux densities into angles. The accuracy of the joint angle measurements was tested using a test bench. Torques were determined by using thin-film pressure sensors. Various mechanical mechanisms for variable positioning of the implant components were integrated into the prototype. The results of the joint angle measurements showed measurement errors of less than 5° in a deflection range of ±15° adduction/abduction combined with ±45° flexion/extension. The proposed design provides a first approach for intra-operative assessment of shoulder stiffness. The findings can be used as a technological basis for further developments. Y1 - 2023 U6 - https://doi.org/10.1016/j.medengphy.2023.104059 N1 - Corresponding author: Sebstian Dendorfer VL - 121 PB - Elsevier ET - Journal Pre-proof ER - TY - JOUR A1 - Bartsch, Alexander A1 - Burger, Moritz A1 - Grad, Marius A1 - Esper, Lukas A1 - Schultheiß, Ulrich A1 - Noster, Ulf A1 - Schratzenstaller, Thomas T1 - Enhancement of laser cut edge quality of ultra-thin titanium grade 2 sheets by applying an in-process approach using modulated Yb:YAG continuous wave fiber laser JF - Discover Mechanical Engineering N2 - Titanium is used in many areas due to its excellent mechanical, biological and corrosion-resistant properties. Implants often have thin and filigree structures, providing an ideal application for fine cutting with laser. In the literature, the main focus is primarily on investigating and optimizing the parameters for titanium sheets with thicknesses greater than 1 mm. Hence, in this study, the basic manufacturing parameters of laser power, cutting speed and laser pulse of a 200 W modulated fiber laser are investigated for 0.15 mm thick grade 2 titanium sheets. A reproducible, continuous cut could be achieved using 90 W laser-power and 2 mm/s cutting-speed. Pulse pause variations between 85 and 335 μs in 50 μs steps and a fixed pulse width of 50 μs show that a minimum kerf width of 23.4 μm, as well as a minimum cut edge roughness Rz of 3.59 μm, is achieved at the lowest pulse pause duration. An increase in roughness towards the laser exit side, independent of the laser pulse pause duration, was found and discussed. The results provide initial process parameters for cutting thin titanium sheets and thus provide the basis for further investigations, such as the influence of cutting gas pressure and composition on the cut edge. KW - Laser cutting KW - Titanium sheet KW - Kerf Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-65647 N1 - Corresponding author: Alexander Bartsch IS - 10 PB - Springer ER - TY - JOUR A1 - Siegl, Marco A1 - Jungbauer, Bastian A1 - Gebhardt, Jakob A1 - Judenmann, Anna A1 - Ehrlich, Ingo ED - Baeten, Somayeh T1 - Winding process of fibre-reinforced thermoplastic tubes with integrated tape production through in-situ roving impregnation and infrared consolidation JF - The International Journal of Advanced Manufacturing Technology N2 - This paper introduces a novel method for producing fibre-reinforced thermoplastic tubes by integrating tape production and consolidation into a single operation. This innovation diverges from conventional methods by combining processes to reduce costs by using raw materials instead of organotapes, allowing customised material combinations and utilising residual heat from tape production. The new process uses carbon roving and molten low-viscosity PA6 granulates, processed through a new direct impregnation setup in siphon design. Key advancements include a high-speed impregnation module capable of up to 1 m/s with high-performance extruders, cost-effective infrared emitters for winding, and a powered consolidation unit with adjustable winding angles between ±65° and ±90°. Experiments demonstrate operational speeds of approximately 471 mm/min, with an optimal cross-winding speed of 354 mm/min due to the technical limitations of the laboratory extruder and IR emitter used. Based on the technical limitations of the current system, future improvements and methodological changes will be discussed. KW - Thermoplastic composite tubes KW - Filament-winding KW - Tape production KW - Thermoplastic impregnation KW - In-situ roving impregnation KW - Infrared consolidation Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-77827 N1 - Corresponding author der OTH Regensburg: Marco Siegl VL - 135 IS - 5-6 SP - 2847 EP - 2870 PB - Springer Nature ER - TY - JOUR A1 - Kravanja, Gaia A1 - Belyaeva, Inna A. A1 - Hribar, Luka A1 - Drevenšek‐Olenik, Irena A1 - Jezeršek, Matija A1 - Shamonin (Chamonine), Mikhail T1 - Tunable Drop Splashing on Magnetoactive Elastomers JF - Advanced Materials Interfaces N2 - The significant effect of an external dc magnetic field on the splashing behavior of ethanol drops impacting on the unstructured (flat) surface of soft magnetoactive elastomers (MAEs) is reported. The Weber number corresponding to the transition between the deposition and the splashing regime is reduced by ≈20% in a moderate magnetic field of ≈300 mT. Alongside this effect, a two-fold increase of the initial deceleration of the ejection sheet is observed for the softest sample. The main underlying mechanism for the observed phenomena is believed to be the magnetic-field-induced stiffening of the MAEs. Further possible mechanisms are magnetically induced changes in the surface roughness and magnetic-field-induced plasticity (magnetic shape memory effect). The potential application areas are magnetically regulable wetting and magneto-responsive surfaces for controlling the drop splashing. Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-24504 N1 - Corresponding author: Mikhail Shamonin VL - 8 IS - 11 SP - 1 EP - 7 PB - Wiley ER - TY - GEN A1 - Kriegl, Raphael A1 - Kravanja, Gaia A1 - Hribar, Luka A1 - Jezeršek, Matija A1 - Drevenšek‐Olenik, Irena A1 - Shamonin (Chamonine), Mikhail T1 - Characterization of Wetting Properties of Magnetoactive Elastomer Surfaces T2 - Proceedings of the ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS) - 2023, September 11–13, 2023 Austin, Texas, USA N2 - Commercially available contact angle (CA) measuring devices usually do not allow for the application of magnetic fields to the sample under test. A setup for measuring the CA of liquids on magnetosensitive surfaces has been developed specifically for investigating the surfaces of magnetoactive elastomers (MAEs). The addition of a programmable linear stage, which moves a permanent magnet, allows for fine control of the magnetic field applied to the MAE without the need for large and power-consuming electromagnets. Paired with a custom control and evaluation software, this measurement setup operates semiautomatically, limiting operator error and increasing precision, speed, as well as repeatability of static and dynamic CA measurements for different magnetoactive materials. The software is equipped with robust droplet fitting algorithms to avoid experimental challenges arising with soft magnetoactive materials, such as the curling of sample edges or diffuse non-reflective surfaces. Several application examples on MAE surfaces, both processed and unprocessed, are presented. KW - magnetoactive elastomers KW - image processing KW - droplet contour fitting KW - contact angle Y1 - 2023 SN - 978-0-7918-8752-3 U6 - https://doi.org/10.1115/SMASIS2023-110998 N1 - Corresponding author: Raphael Kriegl PB - The American Society of Mechanical Engineers CY - New York, USA ER - TY - JOUR A1 - Pangerl, Jonas A1 - Sukul, Pritam A1 - Rück, Thomas A1 - Escher, Lukas A1 - Miekisch, Wolfram A1 - Bierl, Rudolf A1 - Matysik, Frank-Michael T1 - Photoacoustic trace-analysis of breath isoprene and acetone via interband- and Quantum Cascade Lasers JF - Sensors and Actuators: B. Chemical N2 - This research presents two laser-based photoacoustic approaches for analyzing exhaled breath isoprene and acetone. The integration of a PTR-ToF-MS as a reference device ensured the reliability and accuracy of the photoacoustic systems that is based on an ICL for isoprene and a QCL for acetone detection. The calibration yielded limits of detection of 26.9 ppbV and 1.7 ppbV, respectively, and corresponding normalized noise equivalent absorption coefficients (NNEAs) of 5.0E-9 Wcm 1Hz 0.5 and 4.9E-9 Wcm 1Hz 0.5. Laboratory as well as real breath sample measurements from alveolar breath revealed a robust system performance, with only one outlier within the static isoprene measurements. However, discrepancies emerged under dynamic breath sampling conditions, emphasizing the need for further optimization. Especially by knowing the dynamic nature and endogenous origin of exhaled isoprene our findings highlight the potential of breath analysis for non-invasive physio-metabolic and pathophysiological monitoring towards point-of-care devices KW - Photoacoustic spectroscopy KW - Breath analysis/profiling KW - Real-time mass spectrometry KW - Isoprene KW - Acetone Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-77024 N1 - Corresponding author der OTH Regensburg: Jonas Pangerl VL - 424 PB - Elsevier ER - TY - JOUR A1 - Franke, Markus A1 - Wagner, Marcus T1 - Transient surrogate modeling of modally reduced structures with discontinuous loads and damping JF - Archive of Applied Mechanics N2 - In this work, a surrogate model for structural, transient and discontinuously excited finite element method simulations is developed. This allows to reduce the computational effort of repeated calculations of identical models under different load cases. The architecture of the surrogate combines fully connected neural network layers with long short-term memory layers. For the reproduction of different damping ratios, a categorical variable is added to the continuous input data. Based on a recursive flow of the predicted data back to the input layer, long-term dependencies do not vanish due to short-input sequences. The system dimension is reduced by applying the model-order reduction technique for modal decomposition. The high accuracy of the surrogate and the reduction of computational costs are shown on an academic example of a cantilever beam and a real-world example of a robot. The advantages of our approach are illustrated in comparison with state-of-the-art surrogates for transient finite element analysis. By using the surrogate proposed in this study, oscillations due to discontinuous excitation of mechanical structures can be reproduced. For this purpose, only short-input sequences are necessary since the excitation of the oscillations does not have to be part of the input sequence during the whole duration of the oscillations. Due to the categorical variable for the damping ratio, the surrogate can account for the influence of different damping in parameter studies. KW - Discontinuous loads KW - Modal decomposition KW - Surrogate modeling KW - Long short-term memory KW - Finite element method Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-72834 N1 - Corresponding author der OTH Regensburg: Markus Franke VL - 94 IS - 5 PB - Springer Nature ER - TY - JOUR A1 - Lindner, Matthias A1 - Pipa, Andrei V. A1 - Karpen, Norbert A1 - Hink, Rüdiger A1 - Berndt, Dominik A1 - Foest, Rüdiger A1 - Bonaccurso, Elmar A1 - Weichwald, Robert A1 - Friedberger, Alois A1 - Caspari, Ralf A1 - Brandenburg, Ronny A1 - Schreiner, Rupert T1 - Icing Mitigation by MEMS-Fabricated Surface Dielectric Barrier Discharge JF - Applied Sciences N2 - Avoiding ice accumulation on aerodynamic components is of enormous importance to flight safety. Novel approaches utilizing surface dielectric barrier discharges (SDBDs) are expected to be more efficient and effective than conventional solutions for preventing ice accretion on aerodynamic components. In this work, the realization of SDBDs based on thin-film substrates by means of micro-electro-mechanical-systems (MEMS) technology is presented. The anti-icing performance of the MEMS SDBDs is presented and compared to SDBDs manufactured by printed circuit board (PCB) technology. It was observed that the 35 mu m thick electrodes of the PCB SDBDs favor surface icing with an initial accumulation of supercooled water droplets at the electrode impact edges. This effect was not observed for 0.3 mu m thick MEMS-fabricated electrodes indicating a clear advantage for MEMS-technology SDBDs for anti-icing applications. Titanium was identified as the most suitable material for MEMS electrodes. In addition, an optimization of the MEMS-SDBDs with respect to the dielectric materials as well as SDBD design is discussed. KW - aerospace engineering KW - anti-icing KW - DBD PLASMA ACTUATORS KW - EXCITATION KW - FLOW-CONTROL KW - low-temperature plasma KW - MEMS KW - SEPARATION CONTROL KW - SDBD Y1 - 2021 U6 - https://doi.org/10.3390/app112311106 N1 - Corresponding author: Matthias Lindner VL - 11 IS - 23 SP - 1 EP - 17 PB - MDPI CY - Basel ER - TY - JOUR A1 - Gamisch, Bernd A1 - Huber, Lea A1 - Gaderer, Matthias A1 - Dawoud, Belal T1 - On the Kinetic Mechanisms of the Reduction and Oxidation Reactions of Iron Oxide/Iron Pellets for a Hydrogen Storage Process JF - Energies N2 - This work aims at investigating the kinetic mechanisms of the reduction/oxidation (redox) reactions of iron oxide/iron pellets under different operating conditions. The reaction principle is the basis of a thermochemical hydrogen storage system. To simulate the charging phase, a single pellet consisting of iron oxide (90% Fe2O3, 10% stabilising cement) is reduced with different hydrogen (H2) concentrations at temperatures between 600 and 800 °C. The discharge phase is initiated by the oxidation of the previously reduced pellet by water vapour (H2O) at different concentrations in the same temperature range. In both reactions, nitrogen (N2) is used as a carrier gas. The redox reactions have been experimentally measured in a thermogravimetric analyser (TGA) at a flow rate of 250 mL/min. An extensive literature review has been conducted on the existing reactions’ kinetic mechanisms along with their applicability to describe the obtained results. It turned out that the measured kinetic results can be excellently described with the so-called shrinking core model. Using the geometrical contracting sphere reaction mechanism model, the concentration- and temperature-dependent reduction and oxidation rates can be reproduced with a maximum deviation of less than 5%. In contrast to the reduction process, the temperature has a smaller effect on the oxidation reaction kinetics, which is attributed to 71% less activation energy (Ea,Re=56.9 kJ/mol versus Ea,Ox=16.0 kJ/mol). The concentration of the reacting gas showed, however, an opposite trend: namely, to have an almost twofold impact on the oxidation reaction rate constant compared to the reduction rate constant. Y1 - 2022 U6 - https://doi.org/10.3390/en15218322 N1 - Corresponding author: Belal Dawoud VL - 15 IS - 21 PB - MDPI ER - TY - JOUR A1 - Käss, Sebastian A1 - Strahringer, Susanne A1 - Westner, Markus T1 - A Multiple Mini Case Study on the Adoption of Low Code Development Platforms in Work Systems JF - IEEE Access N2 - Although adopting Low Code Development Platforms (LCDPs) promises significant efficiency and effectiveness improvements for application development, its adoption still needs further empirical research. This paper uses a combinatorial approach to research LCDP adoption and presents the results of a multiple mini case study with 36 cases on LCDP adoption. A combination of the Socio-Technical Systems theory and the Technology-Organisational-Environment model is used as a theoretical lens. In this paper, we show that LCDP adoption is a multifaceted phenomenon and identify three archetypes for LCDP adoption (i.e., IT Resource Shortage Mitigators, Application Development Democratisers, and Synergy Realisers) and one archetype for LCDP non-adoption (i.e., Intricacy Adversaries). Each archetype can be interpreted as an individual path towards LCDP (non-)adoption. Based on these archetypes, we derive seven starting points for practitioners to adopt LCDPs in work systems. Moreover, by using the theoretical lenses, the paper shows that for an LCDP adoption to occur, an optimisation of the social and technical sub-systems is required. KW - Low Code Development Platform KW - Adoption KW - Case study Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-65634 SN - 2169-3536 N1 - Corresponding author: Markus Westner SP - 118762 EP - 118786 PB - IEEE ER - TY - JOUR A1 - Kriegl, Raphael A1 - Kravanja, Gaia A1 - Hribar, Luka A1 - Čoga, Lucija A1 - Drevenšek‐Olenik, Irena A1 - Jezeršek, Matija A1 - Kalin, Mitjan A1 - Shamonin (Chamonine), Mikhail T1 - Microstructured Magnetoactive Elastomers for Switchable Wettability JF - Polymers N2 - We demonstrate the control of wettability of non-structured and microstructured magnetoactive elastomers (MAEs) by magnetic field. The synthesized composite materials have a concentration of carbonyl iron particles of 75 wt.% (≈27 vol.%) and three different stiffnesses of the elastomer matrix. A new method of fabrication of MAE coatings on plastic substrates is presented, which allows one to enhance the response of the apparent contact angle to the magnetic field by exposing the particle-enriched side of MAEs to water. A magnetic field is not applied during crosslinking. The highest variation of the contact angle from (113 ± 1)° in zero field up to (156 ± 2)° at about 400 mT is achieved in the MAE sample with the softest matrix. Several lamellar and pillared MAE structures are fabricated by laser micromachining. The lateral dimension of surface structures is about 50 µm and the depth varies between 3 µm and 60 µm. A systematic investigation of the effects of parameters of laser processing (laser power and the number of passages of the laser beam) on the wetting behavior of these structures in the absence and presence of a magnetic field is performed. In particular, strong anisotropy of the wetting behavior of lamellar structures is observed. The results are qualitatively discussed in the framework of the Wenzel and Cassie-Baxter models. Finally, directions of further research on magnetically controlled wettability of microstructured MAE surfaces are outlined. The obtained results may be useful for the development of magnetically controlled smart surfaces for droplet-based microfluidics. Y1 - 2022 U6 - https://doi.org/10.3390/polym14183883 N1 - Corresponding authors: Raphael Kriegl und Mikhail Shamonin VL - 14 IS - 18 SP - 1 EP - 21 PB - MDPI ER - TY - JOUR A1 - Lehrer, Tobias A1 - Kaps, Arne A1 - Lepenies, Ingolf A1 - Duddeck, Fabian A1 - Wagner, Marcus T1 - 2S-ML: A simulation-based classification and regression approach for drawability assessment in deep drawing JF - International Journal of Material Forming N2 - New structural sheet metal parts are developed in an iterative, time-consuming manner. To improve the reproducibility and speed up the iterative drawability assessment, we propose a novel low-dimensional multi-fidelity inspired machine learning architecture. The approach utilizes the results of low-fidelity and high-fidelity finite element deep drawing simulation schemes. It hereby relies not only on parameters, but also on additional features to improve the generalization ability and applicability of the drawability assessment compared to classical approaches. Using the machine learning approach on a generated data set for a wide range of different cross-die drawing configurations, a classifier is trained to distinguish between drawable and non-drawable setups. Furthermore, two regression models, one for drawable and one for non-drawable designs are developed that rank designs by drawability. At instantaneous evaluation time, classification scores of high accuracy as well as regression scores of high quality for both regressors are achieved. The presented models can substitute low-fidelity finite element models due to their low evaluation times while at the same time, their predictive quality is close to high-fidelity models. This approach may enable fast and efficient assessments of designs in early development phases at the accuracy of a later design phase in the future. KW - One-step KW - Deep drawing KW - Drawability KW - Meta-modeling KW - Machine learning Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-64664 N1 - Corresponding author: Tobias Lehrer VL - 16 SP - 1 EP - 17 PB - Springer ER - TY - JOUR A1 - Mikhaeil, Makram A1 - Nowak, Sebastian A1 - Palomba, Valeria A1 - Frazzica, Andrea A1 - Gaderer, Matthias A1 - Dawoud, Belal T1 - Experimental and analytical investigation of applying an asymmetric plate heat exchanger as an evaporator in a thermally driven adsorption appliance JF - Applied Thermal Engineering N2 - This communication presents an experimental and analytical study on the evaporation mechanism in a closed-structured asymmetric plate heat exchanger (PHE) employed as a stagnant water evaporator for the application in an adsorption heat transformation appliance. To this aim, an experimental unit is constructed, which comprises two identical PHEs, one acting as an vaporator/condenser and the second, as an adsorber/desorber. Two endoscopes are mounted inside the investigated evaporator to visualize the evaporation mechanism when performing adsorption-evaporation processes under different boundary conditions. It turned out that the evaporation mechanism is a partially covered, thin film evaporation. A heat transfer analysis is performed to evaluate the heat transfer coefficient of the thin film evaporation () inside the investigated evaporator, resulting in -values between 1330 and 160 [W∙m−2∙K−1] over the investigated adsorption-evaporation time. Correlating the obtained () to the film thickness and the wetted area results in -values between 0.34 and 0.78 [mm] and wetted to total area ratios of 0.78 to 0.16. Besides, an analytical model has been developed and introduced to correlate the overall evaporator heat transfer coefficient with the adsorption potential and the time rate of change of the water uptake. KW - Adsorption-evaporation KW - Evaporator KW - Plate heat exchanger KW - Thin film evaporation Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-61115 N1 - Corresponding author: Belal Dawoud IS - 228 PB - Elsevier ER - TY - CHAP A1 - Karamara, Merve A1 - Bogdanski, Moritz-Ole A1 - Zöller, Raphael A1 - Albrecht, Sophie Viktoria A1 - Linner, Thomas A1 - Bock, Thomas A1 - Braml, Thomas T1 - Increasing efficiency and sustainability: A comparative analysis of concrete 3D printing and traditional methods based on case studies T2 - MATEC Web of Conferences N2 - At the forthcoming Concrete Solutions 2025 conference, the subject of concrete 3D printing will be explored in the “Case Studies” category, with a comparison to traditional methods. Concrete 3D printing offers several significant advantages, including the ability to create complex geometries, increased material efficiency, faster build times and cost savings. These are particularly important in the context of the current skilled labour shortage and emphasis on resource efficiency in construction. Nevertheless, challenges persist in the areas of machine reliability, process integration, and material adaptation to meet the requirements of 3D printing. The case studies will present modular and design-engineering-based strategies for the development of efficient, scalable automation solutions that integrate 3D printing into existing processes and allow for project-specific customisation through selective automation. These findings provide a robust framework for industrial applications that enhance efficiency and adaptability. By comparing concrete 3D printing to conventional methods, the insights offer a foundation for advancing automated production in construction, promoting scalable, resource-efficient, and economically sustainable practices that address the industry’s evolving demands. Y1 - 2025 U6 - https://doi.org/10.1051/matecconf/202540913005 N1 - Corresponding author der OTH Regensburg: Merve Karamara VL - 409 PB - EDP Sciences ER - TY - JOUR A1 - Franke, Markus A1 - Wagner, Marcus A1 - Krause, Tom Janis T1 - Data-driven model order reduction with surrogate elements for transient simulations JF - Engineering Computations : International journal for computer-aided engineering and software N2 - Purpose – The purpose of this study is to introduce surrogate elements for static and transient finite element simulations. These elements are designed to replace regions of several conventional solid elements with a single artificial element that possesses a reduced number of degrees of freedoms (dofs). A notable advantage of our surrogate elements is their seamless integration into standard finite element meshes. Design/methodology/approach – The construction of the surrogate elements stiffness and mass matrices is achieved through an optimization process wherein displacements serve as the optimization objective. Moreover, the matrices are designed to possess properties analogous to those of standard finite elements. A particular focus is placed on ensuring that the artificial stiffness matrices are positive semi-definite. Furthermore, artificial degrees of freedom are introduced. Findings – The efficacy of the proposed technique is demonstrated through its application to two different use cases. It is demonstrated that, despite being trained on examples comprising a single surrogate element, the surrogate elements can be employed multiple times within complex and practical models. The degree of accuracy achieved in these applications is noteworthy. Moreover, the proposed method is considerably faster than the fully discretized models. Originality/value – The study expands the field of substructuring and model order reduction by incorporating artificial surrogate elements built by neural networks, which enables seamless integration with standard finite element analysis via positive semi-definite matrices. Furthermore, the introduction of artificial degrees of freedom, which are detached from the computational domain, is proposed. Once trained, the surrogate elements can be utilised in load and support independent scenarios. Y1 - 2025 U6 - https://doi.org/10.1108/EC-06-2024-0511 VL - 2025 PB - Emerald Publishing CY - Leeds ER - TY - JOUR A1 - Hillebrand, Patrick A1 - Westner, Markus A1 - Matschi, Markus T1 - Schlüsselfaktoren erfolgreicher CIOs JF - HMD Praxis der Wirtschaftsinformatik N2 - Die vorliegende Studie untersucht Schlüsselfaktoren erfolgrei- cher CIOs in deutschen Großunternehmen. Mit einer mittleren Verweildauer (Median) von 4,0 Jahren weisen deutsche CIOs, die mit 43 % noch überwiegend an den CFO berichten, im Vergleich zu anderen C-Level-Positionen eine deutlich kürzere Verweildauer im Amt auf. Die Ergebnisse aus 60 Interviews mit erfolgreichen deutschsprachigen CIOs, die primär über eine überdurchschnittlich lange Verweildauer verfügen, lassen verschiedene Schlüsselfaktoren für den Erfolg erkennen: Grundvoraussetzung ist stets die Gewährleistung eines sicheren und effizienten IT-Betriebs. Über effektive und innovative Change-Projekte machen die interviewten CIOs den IT-Mehrwert transparent und agieren als Brückenbauer zwischen IT und Fachbereichen. Dadurch wirken sie positiv auf die Firmenkultur ein und etablieren die IT nachhaltig in den Fachbereichen als Erfolgsfaktor. Erfolgreiche CIOs selbst sind keine „Techies“, sondern zeichnen sich durch hohe Führungskompetenz und ein hohes Geschäftsverständnis, gepaart mit visionärem Denken aus. Dadurch gelingt es ihnen, die IT zukunftsorientiert auszurichten und Anforderungen und Potenziale für und aus den Fachbereichen frühzeitig zu antizipieren. Die zukünftige Entwicklung der CIO-Organisation und der Paradigmen in der IT wird durch die Studienteilnehmer hingegen teilweise kontrovers diskutiert – so gibt es beispielsweise bei der Beurteilung der Sinnhaftigkeit und Relevanz der CDO-Position noch kein einheitliches Meinungsbild. Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-33751 N1 - Corresponding author: Markus Westner VL - 59 SP - 762 EP - 779 PB - Springer Nature ER - TY - JOUR A1 - Thumann, Philipp A1 - Buchner, Stefan A1 - Marburg, Steffen A1 - Wagner, Marcus T1 - A comparative study of Glinka and Neuber approaches for fatigue strength assessment on 42CrMoS4-QT specimens JF - Strain N2 - In fatigue strength assessment, the methods based on ideal elastic stresses according to Basquin and the less established method based on elastic-plastic stress quantities according to Manson, Coffin and Morrow are applied. The former calculates loads using linear-elastic stresses, the latter requires elasticplastic evaluation parameters, such as stresses and strains. These can be determined by finite element analysis (FEA) with a linear-elastic constitutive law, and subsequent conversion to elastic-plastic loads, using the macro support formula by Neuber. In this contribution, an alternative approach to approximate elastic-plastic parameters proposed by Glinka is compared to the the strain-life method using Neuber's formula, as well as the stress-life method of Basquin. Several component tests on 42CrMoS4-QT specimens are investigated. To determine the input data for the fatigue strength evaluations, the entire test setup is computed by FEA. The nodal displacements from these validated full-model simulations are used as boundary conditions for a submodel simulation of a notch, whose results serve as input for the fatigue strength assessments. It is shown that all approaches provide a reliable assessment of components. Our key result is that the strain-life method using the concept by Glinka for notch stress computation, yields improved results in fatigue strength assessments. KW - 42CrMoS4-QT KW - fatigue strength KW - stress-life method KW - Glinka KW - strain-life method Y1 - 2023 U6 - https://doi.org/10.1111/str.12470 SN - 1475-1305 N1 - Corresponding author: Marcus Wagner VL - 2023 IS - e12470 PB - Wiley ER - TY - JOUR A1 - Schuhegger, Lukas A1 - Kara, Sinan A1 - Galka, Stefan A1 - Dünnweber, Jan A1 - Meißner, Sebastian T1 - Umzugsplanung mit Fabrikdatenmodellen und Virtual Reality JF - Zeitschrift für wirtschaftlichen Fabrikbetrieb N2 - Angesichts eines dynamischen industriellen Umfelds müssen produzierende Unternehmen flexibel bleiben und sich kontinuierlich anpassen, um ihre Wettbewerbsfähigkeit zu erhalten. Eine effektive Planung von Restrukturierungen in Produktionssystemen, oft als Umzugsplanung bezeichnet, ist entscheidend, um Verzögerungen zu vermeiden und Stillstandszeiten zu minimieren. Die Identifikation von Umzugsfällen, welche den Umfang umzuziehender Ressourcen wie Maschinen, Anlagen, Ausrüstungen und Arbeitsplätzen beschreiben und die Definition zugehöriger Aufgaben sind essenzielle Schritte der Umzugsplanung. Dieser Beitrag stellt eine Vorgehensweise zur Bestimmung von Umzugsfällen mittels eines Fabrikdatenmodells vor, ergänzt durch eine Visualisierung in Virtual Reality, um Planende bei der Umzugsplanung zu unterstützen. N2 - Given a dynamic industrial environment, manufacturing companies must remain flexible and continuously adapt to maintain their competitiveness. Effective planning of restructuring efforts in production systems, often referred to as reconfiguration planning, is crucial to avoid delays and minimize downtime. Identifying reconfiguration cases, which describe the scope of resources to be relocated, such as machines, equipment, and workstations, and defining the associated tasks are essential steps in reconfiguration planning. This paper presents an approach for determining reconfiguration cases using a factory data model, complemented by visualization in virtual reality, to support planners in the reconfiguration process. KW - Fabrikdatenmodel KW - Virtual Reality KW - Umzugsplanung KW - Restrukturierung KW - Umstellung KW - Factory Data Model KW - Reconfiguration Planning KW - Restructuring KW - Relocation KW - Virtual Reality Y1 - 2024 U6 - https://doi.org/10.1515/zwf-2024-1154 SN - 2511-0896 SN - 0947-0085 N1 - Corresponding author der OTH Regensburg: Lukas Schuhegger VL - 119 IS - 11 SP - 799 EP - 804 PB - de Gruyter ER - TY - JOUR A1 - Schmidbauer, Simon A1 - Becker, Maria A1 - Haug, Sonja T1 - Online Political Participation of Refugees in Germany: Analysis of a Survey in Bavaria JF - Sage Online N2 - New media are an important resource for the political participation of marginalized groups. However, there is still a lack of knowledge about the factors that influence whether this opportunity is used. Influencing factors emerge from both the Civic Voluntarism Model and previous research on migrants’ political activity. Using data collected in 2019/2020 from 486 refugees living in Bavaria, we estimate linear probability models to investigate facilitating factors for the use of new media for political participation. The analysis shows that refugees in Germany who inform themselves about politics online tend to be predominantly male, higher educated, and politically involved. Language skills and the duration of stay also appear to be important. For the expression of one’s political opinion online, gender and language skills have an impact, but informing oneself about German politics, political interest, and offline political activity in Germany are the most relevant factors. This indicates that there is a close link between on- und offline activity. However, using the internet requires particular resources, so that people with lower language skills, for example, are particularly disadvantaged. KW - political participation KW - internet use KW - refugees KW - political online participation Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-77671 N1 - Corresponding author der OTH Regensburg: Sonja Haug PB - Sage CY - Thousand Oaks ER - TY - JOUR A1 - Grad, Marius A1 - Schultheiß, Ulrich A1 - Diemar, Andreas A1 - Spieß, Lothar A1 - Noster, Ulf T1 - Preparation methodology for the microstructural characterization of diffusion layers in a titanium/steel composite JF - Practical Metallography N2 - Hot pressing of titanium and carbon steel leads to the formation of a diffusion layer at the interface. Depending on the carbon content of the steel used, it either exclusively contains TiC or additional other phases. In the case of steel with a medium carbon concentration (0.67 wt.% C), a pure TiC layer forms. A preparation methodology was developed to make statements about functional and microstructural properties of the respective layers such as layer thickness, porosity, or grain size. However, apart from the diffusion layer’s microstructure, it also reveals the microstructure of the two base substrates. A comparison based on electron backscatter diffraction (EBSD) examinations yields similar results in terms of microstructure. A micrograph analysis based on the new preparation methodology also allows confirming the element distribution measurement by glow discharge optical emission spectroscopy (GDOES). The methodology therefore provides a way of quickly and reliably controlling the layer formation during the hot pressing process of titanium and carbon steel. N2 - Beim Heißpressen von Titan und Kohlenstoffstahl entsteht an der Grenzfläche eine Diffusionsschicht, welche abhängig vom Kohlenstoffgehalt des verwendeten Stahls entweder ausschließlich TiC oder zusätzliche andere Phasen enthält. Im Fall eines Stahls mit mittlerer Kohlenstoffkonzentration (0,67 wt.-% C) bildet sich eine reine TiC-Schicht. Um eine Aussage über die funktionalen und mikrostrukturellen Eigenschaften, wie Schichtdicke, Porosität oder Korngröße, entsprechender Schichten treffen zu können, wurde eine Präparationsmethodik entwickelt. Hierbei wird jedoch nicht nur das Gefüge der Diffusionsschicht, sondern auch das der beiden Grundsubstrate entwickelt. Ein Vergleich mit Elektronenrückstreubeugungs-Untersuchungen (EBSD) liefert hinsichtlich der Mikrostruktur vergleichbare Ergebnisse. Auch die Messung der Elementverteilung durch Glimmentladungsspektroskopie (GDOES) kann durch eine Schliffbildanalyse unter Anwendung der neuen Präparationsmethodik belegt werden. Die Methodik stellt also eine Möglichkeit zur schnellen und sicheren Kontrolle der Schichtbildung beim Heißpressen von Titan und Kohlenstoffstahl dar. T2 - Präparationsmethodik zur mikrostrukturellen Charakterisierung von Diffusionsschichten eines Titan-Stahl-Verbunds KW - Diffusion layers KW - TiC KW - microstructure KW - preparation methodology KW - EBSD KW - GDOES Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-78346 SN - 2195-8599 N1 - Corresponding author der OTH Regensburg: Marius Grad VL - 61 IS - 12 SP - 938 EP - 946 PB - Walter de Gruyter GmbH ER - TY - JOUR A1 - Pangerl, Jonas A1 - Moser, Elisabeth A1 - Müller, Max A1 - Weigl, Stefan A1 - Jobst, Simon A1 - Rück, Thomas A1 - Bierl, Rudolf A1 - Matysik, Frank-Michael T1 - A sub-ppbv-level Acetone and Ethanol Quantum Cascade Laser Based Photoacoustic Sensor– Characterization and Multi-Component Spectra Recording in Synthetic Breath JF - Photoacoustics N2 - Trace gas analysis in breath is challenging due to the vast number of different components. We present a highly sensitive quantum cascade laser based photoacoustic setup for breath analysis. Scanning the range between 8263 and 8270 nm with a spectral resolution of 48 pm, we are able to quantify acetone and ethanol within a typical breath matrix containing water and CO2. We photoacoustically acquired spectra within this region of mid-infra-red light and prove that those spectra do not suffer from non-spectral interferences. The purely additive behavior of a breath sample spectrum was verified by comparing it with the independently acquired single component spectra using Pearson and Spearman correlation coefficients. A previously presented simulation approach is improved and an error attribution study is presented. With a 3σ detection limit of 6.5 ppbv in terms of ethanol and 250 pptv regarding acetone, our system is among the best performing presented so far. KW - Acetone KW - Breath analysis KW - Photoacoustic spectroscopy KW - Quantum cascade laser KW - Spectral simulation Y1 - 2023 U6 - https://doi.org/10.1016/j.pacs.2023.100473 SN - 2213-5979 N1 - Corresponding author: Jonas Pangerl VL - 30 SP - 1 EP - 12 PB - Elsevier ER - TY - JOUR A1 - Rauch, Johannes A1 - Brückl, Oliver T1 - Achieving Optimal Reactive Power Compensation in Distribution Grids by Using Industrial Compensation Systems JF - Electricity N2 - This paper presents a method for integrating industrial consumers owning compensation systems as alternative reactive power sources into grid operating processes. In remuneration, they receive a market-based provision of reactive power. The aim is to analyze the potential of reactive power compensation systems of industrial companies connected to medium-voltage (10 kV–30 kV) AC grids in order to increase the reactive power ability of distribution grids. Measurement methods and reactive power potential results of six industrial companies are presented to characterize the amount and temporal availability of their reactive power potential. The presented approach for using the decentralized reactive power potential is a centralized reactive power control method and is based on optimal power flow (OPF) calculations. An optimization algorithm based on linear programming is used to coordinate a reactive power retrieval tuned to the actual demand. The influencing quantities are the current grid status (voltage and load flow capacity reserves at grid nodes and power lines) and the current reactive power potential of the reactive power sources. The compensation impact of six measured industrial companies on an exemplary medium-voltage grid is shown by an application example. KW - Blindleistung KW - Blindleistungsmanagement KW - Industriebetriebe KW - Optimal Power Flow KW - Reactive Power Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-59139 N1 - Corresponding author: Johannes Rauch VL - 4 IS - 1 SP - 78 EP - 95 PB - MDPI CY - Basel ER - TY - CHAP A1 - Pfahler, Katharina A1 - Thiel, Charlotte A1 - Neidhart, Thomas T1 - Einfluss der Probengeometrie auf die Mechanischen Eigenschaften von Stampflehm - Eine Literaturrecherche T2 - ce/papers - Proceedings in Civil Engineering N2 - Der Klimawandel lenkt den Fokus im Bauwesen zunehmend auf die Reduktion von Treibhausgasen und die Förderung nachhaltiger Materialien. Baustoffe wie Lehm gewinnen dank ihrer ökologischen und bauphysikalischen Vorteile an Bedeutung. Eine zentrale Herausforderung stellt die Definition standardisierter Prüfmethoden für Stampflehm dar. Dieser Beitrag analysiert Forschungsergebnisse zur Geometrie von Stampflehmprobekörpern mittels Literaturrecherche und vergleicht experimentelle Untersuchungen sowie relevante Normen und Testmethoden. Die Auswertung zeigt, dass äußere Einflüsse wie Mischungszusammensetzung, Verdichtungsenergie, Gesteinskörnung und Tonminerale eine zentrale Rolle spielen. Eine Vereinheitlichung von Probengeometrie, Lagerung und Prüfverfahren ist essenziell, um reproduzierbare Ergebnisse zu erzielen und die mechanischen Kennwerte von Stampflehm vergleichbar zu machen. Ziel ist es, einheitliche Standards zu entwickeln, um die Stampflehmbauweise in der Praxis zu fördern. KW - Lehmbau KW - Stampflehm KW - Stampflehm Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-80291 SN - 2509-7075 N1 - Corresponding author der OTH Regensburg: Katharina Pfahler VL - 8 IS - 1 SP - 57 EP - 68 PB - Ernst & Sohn, a Wiley Brand ER - TY - JOUR A1 - Röhrl, Simon A1 - Staufer, Susanne A1 - Bugert, Flemming A1 - Nadimpalli, Vamsi Krishna A1 - Hauser, Florian A1 - Grabinger, Lisa A1 - Bittner, Dominik A1 - Ezer, Timur A1 - Altweck, Ricardo A1 - Graf, Sabine A1 - Kriza, Thomas A1 - Mottok, Jürgen T1 - Ethical Considerations of AI in Education: A Case Study based on Pythia Learning Enhancement System JF - IEEE Access N2 - As the use of AI in education increases, addressing ethical concerns is essential for its responsible use and implementation. This study explores the ethical considerations of AI in education by analyzing a concrete application, the Pythia Learning Enhancement System, which enables personalized and adaptive educational experiences. In this case study, the concrete implementation of Pythia, contrary to high-level abstract analyses, provides practical insights into these ethical issues. To achieve this goal, we first define Pythia and outline its implementation. Using the various topics covered by Pythia, the ethical issues associated with each of these topics are outlined, resulting in a list of ten distinct ethical issues. Because there is overlap in issues covered by similar applications, they can benefit from this identification. An ethical (human rights) and didactic (constructivism) theoretical background is then provided as a basis for further discussion. This is used to build the arguments used in the main study. This consists of analyzing each of the issues and providing recommendations to mitigate potential harm arising from these issues. This helps to provide guidelines for future applications. In the analysis, the ethical discussion is mainly based on the human rights of the stakeholders involved, emphasizing human dignity. After the analysis, each of the issues is contextualized with the recent AI Act of the European Union, providing a novel mapping of the issues of AI in education to the AI Act. Finally, the limitations of the study are stated and a plan for future research is presented. KW - Ethics KW - Artificial intelligence KW - Education KW - Stakeholders KW - Psychology KW - Privacy KW - Search problems KW - Guidelines KW - Focusing KW - Europe Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-83403 SN - 2169-3536 N1 - Corresponding author der OTH Regensburg: Simon Röhrl VL - 11 SP - 1 EP - 25 PB - Institute of Electrical and Electronics Engineers (IEEE) ER - TY - JOUR A1 - Gärtner, Sebastian A1 - Rank, Daniel A1 - Heberl, Michael A1 - Gaderer, Matthias A1 - Dawoud, Belal A1 - Haumer, Anton A1 - Sterner, Michael T1 - Simulation and Techno-Economic Analysis of a Power-to-Hydrogen Process for Oxyfuel Glass Melting JF - Energies N2 - As an energy-intensive industry sector, the glass industry is strongly affected by the increasingly stringent climate protection targets. As established combustion-based production systems ensure high process stability and glass quality, an immediate switch to low greenhouse gas emission processes is difficult. To approach these challenges, this work investigates a step-by-step integration of a Power-to-Hydrogen concept into established oxyfuel glass melting processes using a simulation approach. This is complemented by a case study for economic analysis on a selected German glass industry site by simulating the power production of a nearby renewable energy park and subsequent optimization of the power-to-hydrogen plant performance and capacities. The results of this study indicate, that the proposed system can reduce specific carbon dioxide emissions by up to 60%, while increasing specific energy demand by a maximum of 25%. Investigations of the impact of altered combustion and furnace properties like adiabatic flame temperature (+25 °C), temperature efficiency (∆ξ = −0.003) and heat capacity flow ratio (∆zHL = −0.009) indicate that pure hydrogen-oxygen combustion has less impact on melting properties than assumed so far. Within the case study, high CO2 abatement costs of 295 €/t CO2-eq. were determined. This is mainly due to the insufficient performance of renewable energy sources. The correlations between process scaling and economic parameters presented in this study show promising potential for further economic optimization of the proposed energy system in the future. KW - Power-to-Gas KW - Hydrogen KW - Electrolysis KW - Oxyfuel KW - Glass Industry Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-22713 N1 - Corresponding author: Sebastian Gärtner VL - 14 IS - 24 PB - MDPI ER - TY - JOUR A1 - Reicheneder, Matthias A1 - Westner, Markus A1 - Matschi, Markus T1 - IT-Near- und Offshoring in deutschen Großunternehmen: Aktueller Stand, Motive und Auswahlkriterien JF - HMD Praxis der Wirtschaftsinformatik N2 - Die vorliegende Studie untersucht die aktuelle IT-Near- und Offshoring-Praxis in deutschen Großunternehmen. Dafür wurden 33 CIOs und IT-Führungskräfte mittels Interviews befragt. Haupttreiber der geografischen Verlagerung von IT-Services ins Ausland ist die Ressourcenverfügbarkeit in anderen Ländern, bedingt durch den Fachkräftemangel in Deutschland. Dies trifft auch auf die Auswahl geeigneter IT-Services für das Near- und Offshoring zu. Während IT-Near- und Offshoring historisch primär aufgrund von Kosteneinsparungen initiiert wurde, spielt dieser Aspekt heute eine untergeordnete Rolle. Die Interviewteilnehmer und -teilnehmerinnen sehen in Kosteneinsparungen zwar immer noch einen positiven Effekt, erwarten aber, dass dieser in Zukunft aufgrund der Angleichung des Kostenniveaus schwinden wird. Die Unternehmen verlagern hauptsächlich Applikationsbetrieb und -entwicklung, erkennen jedoch zunehmend das Potenzial, auch höherwertige Aufgaben, z. B. Projektmanagement und Unternehmensarchitekturmanagement, aus geografisch entfernteren Ländern erbringen zu lassen. Unternehmen, die ausschließlich IT-Nearshoring betreiben, erbringen weniger als ein Drittel ihrer IT-Services aus nahegelegenen Ländern. Firmen mit IT-Offshoring-Präsenzen weisen einen höheren IT-Near‑/Offshoringgrad auf und verlagern knapp die Hälfte der eigenen IT-Serviceerbringung ins Ausland. Die beliebtesten Länder sind Portugal für das Nearshoring und Indien für das Offshoring. KW - Nearshoring KW - Offshoring KW - IT Services KW - Drivers KW - Selection Criteria KW - Large Companies KW - Study KW - Motive KW - Auswahlkriterien KW - Großunternehmen KW - Studie Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-79582 SN - 1436-3011 N1 - Corresponding author der OTH Regensbrg: Markus Westner PB - Springer Nature CY - Wiesbaden ER - TY - JOUR A1 - Mauerer, Wolfgang A1 - Joblin, Mitchell A1 - Tamburri, Damian A1 - Paradis, Carlos A1 - Kazman, Rick A1 - Apel, Sven T1 - In Search of Socio-Technical Congruence: A Large-Scale Longitudinal Study JF - IEEE Transactions on Software Engineering (TSE) N2 - This paper describes a large-scale empirical study investigating the relevance of socio-technical congruence over key basic software quality metrics, namely, bugs and churn. That is, we explore whether alignment or misalignment of social communication structures and technical dependencies in large software projects influences software quality. To this end, we have defined a quantitative and operational notion of socio-technical congruence, which we call /socio-technical motif congruence/ (STMC). STMC is a measure of the degree to which developers working on the same file or on two related files, need to communicate. As socio-technical congruence is a complex and multi-faceted phenomenon, the interpretability of the results is one of our main concerns, so we have employed a careful mixed-methods statistical analysis. In particular, we provide analyses with similar techniques as employed by seminal work in the field to ensure comparability of our results with the existing body of work. The major result of our study, based on an analysis of 25 large open-source projects, is that STMC is /not/ related to project quality measures---software bugs and churn---in any temporal scenario. That is, we find no statistical relationship between the alignment of developer tasks and developer communications on one hand, and project outcomes on the other hand. We conclude that, wherefore congruence does matter as literature shows, then its measurable effect lies elsewhere. KW - Socio-Technical Congruence KW - Human Factors in Software Engineering; KW - Graph Analysis KW - Empirical Software Engineering KW - Quantitative Software Engineering KW - Mixed-Methods Research KW - Socio-Technical Analysis Y1 - 2022 U6 - https://doi.org/10.1109/TSE.2021.3082074 N1 - Corresponding author: Wolfgang Mauerer VL - 48 IS - 8 SP - 3159 EP - 3184 PB - IEEE ER - TY - JOUR A1 - Hofrichter, Andreas A1 - Rank, Daniel A1 - Heberl, Michael A1 - Sterner, Michael T1 - Determination of the optimal power ratio between electrolysis and renewable energy to investigate the effects on the hydrogen production costs JF - International Journal of Hydrogen Energy N2 - Green hydrogen via renewable powered electrolysis has a high relevance in decarbonization and supply security. Achieving economically competitive hydrogen production costs is a major challenge in times of an energy price crisis. Our objective is to show the economically optimal installed capacity of electrolysers in relation to wind and solar power so swift and credible statements can be made regarding the system design. The ratio between renewable generation and electrolysis power as well as scaling effects, operating behaviour and development of costs are considered. Hydrogen production costs are calculated for four exemplary real PV and wind sites and different ratios of electrolysis to renewable power for the year 2020. The ideal ratio for PV systems is between 14% and 73% and for wind between 3.3% and 143% for low and high full load hours. The lowest hydrogen production costs are identified at 2.53 €/kg for 50 MW wind power and 72 MW electrolysis power. The results provide plant constructors the possibility to create a cost-optimized design via an optimum ratio of electrolysis to renewable capacity. Therefore, the procedures for planning and dimensioning of selected systems can be drastically simplified. Y1 - 2023 U6 - https://doi.org/10.1016/j.ijhydene.2022.09.263 SN - 0360-3199 N1 - Corresponding author: Michael Heberl N1 - Corrigendum to “Determination of the optimal power ratio between electrolysis and renewable energy to investigate the effects on the hydrogen production costs” [Int J Hydrogen Energy 48 (5) (2023) 1651–1663] - https://doi.org/10.1016/j.ijhydene.2023.03.128 VL - 48 IS - 5 SP - 1651 EP - 1663 PB - Elsevier ER - TY - JOUR A1 - Müller, Max A1 - Weigl, Stefan A1 - Müller-Williams, Jennifer A1 - Lindauer, Matthias A1 - Rück, Thomas A1 - Jobst, Simon A1 - Bierl, Rudolf A1 - Matysik, Frank-Michael T1 - Comparison of photoacoustic spectroscopy and cavity ring-down spectroscopy for ambient methane monitoring at Hohenpeißenberg JF - Atmospheric Measurement Techniques N2 - With an atmospheric concentration of approximately 2000 parts per billion (ppbV, 10−9), methane (CH4) is the second most abundant greenhouse gas (GHG) in the atmosphere after carbon dioxide (CO2). The task of long-term and spatially resolved GHG monitoring to verify whether climate policy actions are effective is becoming more crucial as climate change progresses. In this paper we report the CH4 concentration readings of our photoacoustic (PA) sensor over a 5 d period at Hohenpeißenberg, Germany. As a reference device, a calibrated cavity ring-down spectrometer, Picarro G2301, from the meteorological observatory of the German Weather Service (DWD) was employed. Trace gas measurements with photoacoustic instruments promise to provide low detection limits at comparably low costs. However, PA devices are often susceptible to cross-sensitivities related to fluctuating environmental conditions, e.g. ambient humidity. The obtained results show that for PA sensor systems non-radiative relaxation effects induced by varying humidity are a non-negligible factor. Applying algorithm compensation techniques, which are capable of calculating the influence of non-radiative relaxation effects on the photoacoustic signal, increase the accuracy of the photoacoustic sensor significantly. With an average relative deviation of 1.11 % from the G2301, the photoacoustic sensor shows good agreement with the reference instrument. Y1 - 2023 U6 - https://doi.org/10.5194/amt-16-4263-2023 SN - 1867-8548 VL - 16 IS - 18 SP - 4263 EP - 4270 PB - Copernicus Publications ER - TY - JOUR A1 - Knödler, Leonard A1 - Dean, Jillian A1 - Knoedler, Samuel A1 - Kauke-Navarro, Martin A1 - Hollmann, Katharina A1 - Alfertshofer, Michael A1 - Helm, Sabrina A1 - Prantl, Lukas A1 - Schliermann, Rainer T1 - Hard shell, soft core? Multi-disciplinary and multi-national insights into mental toughness among surgeons JF - Frontiers in Surgery N2 - Background: With the prevalence of burnout among surgeons posing a significant threat to healthcare outcomes, the mental toughness of medical professionals has come to the fore. Mental toughness is pivotal for surgical performance and patient safety, yet research into its dynamics within a global and multi-specialty context remains scarce. This study aims to elucidate the factors contributing to mental toughness among surgeons and to understand how it correlates with surgical outcomes and personal well-being. Methods: Utilizing a cross-sectional design, this study surveyed 104 surgeons from English and German-speaking countries using the Mental Toughness Questionnaire (MTQ-18) along with additional queries about their surgical practice and general life satisfaction. Descriptive and inferential statistical analyses were applied to investigate the variations in mental toughness across different surgical domains and its correlation with professional and personal factors. Results: The study found a statistically significant higher level of mental toughness in micro-surgeons compared to macro-surgeons and a positive correlation between mental toughness and surgeons' intent to continue their careers. A strong association was also observed between general life satisfaction and mental toughness. No significant correlations were found between the application of psychological skills and mental toughness. Conclusion: Mental toughness varies significantly among surgeons from different specialties and is influenced by professional dedication and personal life satisfaction. These findings suggest the need for targeted interventions to foster mental toughness in the surgical community, potentially enhancing surgical performance and reducing burnout. Future research should continue to explore these correlations, with an emphasis on longitudinal data and the development of resilience-building programs. KW - mental toughness KW - mental health KW - resilience KW - robustness KW - psychology KW - surgery Y1 - 2024 U6 - https://doi.org/10.3389/fsurg.2024.1361406 N1 - Correspondign author der OTH Regensburg: Rainer Schliermann (und Leonard Knoedler) VL - 11 PB - Frontiers ER - TY - JOUR A1 - Savelev, Dmitrii V. A1 - Glavan, Gašper A1 - Belan, Viktoria O. A1 - Belyaeva, Inna A. A1 - Fetisov, Leonid Y. A1 - Shamonin (Chamonine), Mikhail T1 - Resonant Magnetoelectric Effect at Low Frequencies in Layered Polymeric Cantilevers Containing a Magnetoactive Elastomer JF - Applied Sciences N2 - In this work, the resonance enhancement of magnetoelectric (ME) coupling at the two lowest bending resonance frequencies was investigated in layered cantilever structures comprising a magnetoactive elastomer (MAE) slab and a commercially available piezoelectric polymer multilayer. A cantilever was fixed at one end in the horizontal plane and the magnetic field was applied horizontally. Five composite structures, each containing an MAE layer of different thicknesses from 0.85 to 4 mm, were fabricated. The fundamental bending resonance frequency in the absence of a magnetic field varied between roughly 23 and 55 Hz. It decreased with the increasing thickness of the MAE layer, which was explained by a simple theory. The largest ME voltage coefficient of about 7.85 V/A was measured in a sample where the thickness of the MAE layer was ≈2 mm. A significant increase in the bending resonance frequencies in the applied DC magnetic field of 240 kA/m up to 200% was observed. The results were compared with alternative designs for layered multiferroic structures. Directions for future research were also discussed. KW - flexible composite KW - low frequency KW - magnetoactive elastomer KW - magnetoelectric effect KW - piezoelectric polymer Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-30637 N1 - corresponding authors: Dmitry V. Saveliev and Mikhail Shamonin VL - 12 IS - 4 SP - 1 EP - 13 PB - MPDI ER - TY - JOUR A1 - Gebhardt, Jakob A1 - Schlamp, Matthias A1 - Ehrlich, Ingo A1 - Hiermaier, Stefan T1 - Low-velocity impact behavior of elliptic curved composite structures JF - International Journal of Impact Engineering N2 - Although many composite structures are inconsistently curved, such as the leading edges of aircraft wings, the variety of research in impact engineering is almost limited to the impact performance of plates or cylindrically curved specimens. It is not known whether the findings obtained from standardized tests can be transferred to curved structures or which adaptions are required. Therefore, a deeper understanding of the deformation and damage behavior of inconsistently curved structures is essential to transfer the observed impact behavior of flat specimens to general curved structures and therefore to utilize the full lightweight potential of a load-specific design. An accurate description of the procedure as well as the results of the experimental and numerical study of the low-velocity impact behavior of differently single-curved elliptic specimens is presented. To close the research gap of the impact behavior of geometries with curvatures between the plates and simplified leading edges, novel specimens geometries have been derived from established impact test standards. Glassfiber-reinforced specimens are subjected to an instrumented impact test at constant impact energy. This is numerically investigated by a stacked-layer model, which used cohesive zone modeling to enable the simulation of matrix cracking, fiber fracture and delamination. The resulting projected damage areas, as well as the force and deflection histories, were evaluated and section cuts were examined to discuss the damage morphology, formation and propagation process. Significant effects on maximum deflection, compliance and dynamic behavior on the size and morphology of damage were found. KW - Impact damage KW - Impact behavior KW - Curved composite KW - Numerical model KW - GFRP Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-59304 N1 - Corrsponding author: Jakob Gebhardt VL - 180 PB - Elsevier ER - TY - JOUR A1 - Markov-Glazer, Alon A1 - Elbe, Anne-Marie A1 - Schliermann, Rainer T1 - From their eyes: Deaflympic athletes' and coaches' perspectives on mental training JF - Frontiers in sports and active living N2 - INTRODUCTION Sport psychology research has largely overlooked athletes with hearing impairments competing in Deaflympic sports, the designated elite sporting movement for this population. This study therefore explored Deaflympic athletes' and coaches' perspectives on mental training in the elite Deaf sports. METHODS A qualitative approach was used, involving six focus group interviews with 23 athletes (Mage = 33.09; 26.1% female) and four coaches from individual and team Deaf sports. Data were analyzed using reflexive thematic analysis. RESULTS Three themes emerged: sport psychology consultation, the influence of visual orientation on psychological skills and demands, and Deaf sport culture and communication. While participants expressed strong interest in sport psychology, engagement with professionals was limited by accessibility issues, lack of sign language-fluent consultants, and structural barriers. Deaf athletes reported adapting some techniques to match their visual-spatial orientation and both advantages and challenges of visual reliance in sports. Distinct communication dynamics between native signers and spoken-language users within Deaf teams were also revealed. DISCUSSION These findings highlight the importance of culturally sensitive sport psychology frameworks that support the needs and preferences of Deaflympic athletes and promote equitable access to effective mental training resources. Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-84183 N1 - Corresponding author der OTH Regensburg: Alon Markov-Glazer VL - 7 PB - Frontiers ER - TY - JOUR A1 - Schulz, Carsten A1 - Vogl, Yannick A1 - Geiger, Benjamin A1 - Schaeffer, Thomas T1 - Vor- und Nachteile einer Lumped-Mass-Modellierung von Förderbändern am Beispiel eines Zwei-Walzensystems JF - Forschung im Ingenieurwesen JF - Engineering Research N2 - Im Betrieb von Förderbändern auftretende Phänomene sind das Bandwandern in Achsrichtung der Walzen und die Bandverformung in der Bandebene [1, S. 142]. Das Bandwandern ist bisher detailliert untersucht [2–4], während die Bandverformung Gegenstand weniger Veröffentlichungen ist. Deshalb wird in diesem Artikel eine Methode zur Berechnung der sich im dynamischen Betrieb einstellenden Verformung eines elastischen Förderbandes vorgestellt. Dazu wird ein Mehrkörpersimulations-Modell basierend auf der Lumped-Mass-Modellierung verwendet. Als Untersuchungsbeispiel dient ein Zwei-Walzensystem mit flexiblen und zylindrischen Walzen, sowie ein flexibles Förderband. Es zeigt sich, dass mit der Lumped-Mass-Modellierung eine dynamische Bandverformung, die von der gewählten Diskretisierung abhängt, berechnet werden kann. Aufgrund dieser Abhängigkeit ist es notwendig eine Konvergenzanalyse durchzuführen. Zusätzlich ist darauf zu achten, dass die künstliche Anregung aufgrund der Lumped-Mass-Modellierung nicht mit einer Eigenfrequenz des Modells zusammenfällt. N2 - Phenomena occurring in the operation of conveyor belts are belt walking in the axial direction of the rollers and belt deformation in the belt plane [1, S. 142]. Whereas [2,3,4] investigate the first effect in detail [2,3,4], the latter is mostly neglected. The authors therefore focus on the calculation of the deformation of the elastic conveyor belt during dynamic operation using a flexible multibody approach. To consider the flexibility of the belt in an efficient way, the model uses the well-known Lumped-Mass-Approach. The discretization of the model (number and distance of masses) thereby impacts the shape of the band deformation. The article investigates the minimum required discretization for two dimensions, the effect on the system response and the influence on the computation time. As an example, a two-roller system with flexible, cylindrical rolls and a flexible conveyor belt is used. The results of the model will be compared with theoretical expectations and show very promising results. T2 - Pros and cons of Lumped Mass Modelling of conveyor belts using a two-roller system Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-72891 SN - 0015-7899 N1 - Corresponding author der OTH Regensburg: Carsten Schulz VL - 88 IS - 1 PB - Springer Vieweg CY - Belrin ; Heidelberg ER - TY - JOUR A1 - Fetisov, Yuri K. A1 - Chashin, Dmitri V. A1 - Savelev, Dmitrii V. A1 - Fetisov, Leonid Y. A1 - Shamonin (Chamonine), Mikhail T1 - Anisotropic Magnetoelectric Effect in a Planar Heterostructure Comprising Piezoelectric Ceramics and Magnetostrictive Fibrous Composite JF - Materials N2 - The direct magnetoelectric (ME) effect is investigated in a planar structure comprising mechanically coupled layers of a magnetostrictive fibrous composite (MFC) and a piezoelectric ceramics (lead zirconate titanate, PZT). The MFC is an array of Ni-wires with a diameter of 200 mu m that are aligned parallel to each other in a single layer. The wires are separated by a distance of 250 or 500 mu m and fixed in a polyamide matrix. The structure was placed in a tangential constant field H and was excited by an alternating magnetic field h parallel to H, while the voltage generated by the PZT layer was measured. The resulting field dependences of the magnetization M(H) and the magnetostriction lambda(H) were determined by the orientation of the field H in the plane of the structure and the distance between the Ni-wires. The ME coupling coefficient of the structure decreased from 4.8 to 0.25 V/A when the orientation of H was changed from parallel to perpendicular to Ni-wires. With an increase in the excitation field amplitude h, a nonlinear ME effect in the output voltage, namely frequency doubling, was observed. The frequency and field dependences of the efficiency of the ME transduction in the MFC-piezoelectric heterostructure are well described by the existing theory. KW - composite KW - frequency doubling KW - heterostructure KW - magnetoelectric effect KW - magnetostrictive fiber KW - piezoelectric ceramic material Y1 - 2019 U6 - https://doi.org/10.3390/ma12193228 N1 - Corresponding authors: Yuri Fetisov, Mikhail Shamonin VL - 12 IS - 19 SP - 1 EP - 13 PB - MDPI CY - Basel ER - TY - GEN A1 - Saffert, Anne-Sophie A1 - Melzner, Maximilian A1 - Dendorfer, Sebastian T1 - Biomechanical Analysis of the Right Elevated Glenohumeral Joint in Violinists during Legato-Playing T2 - Biomdlore 2021: 21-23 October 2021 Vilnius/Trakai, Lithuania N2 - BACKGROUND: Many statistics reveal that violin players suffer most often from musculoskeletal disorders compared to musicians of other instrument groups. A common phenomenon, especially observed in violin beginners, is the tendency to elevate the right shoulder during playing the violin. This can probably lead to serious disorders in long-term practice with repetitive movements. OBJECTIVE: For this reason, this study investigated the relationship between the right shoulder elevation and the force in the right glenohumeral joint during violin playing. It was hypothesized that the forces in the right glenohumeral joint are higher during playing with the right shoulder raised compared to playing in normal posture. METHODS: Motion capture data from four experienced violinists was recorded and processed by means of musculoskeletal simulation to get the force and elevation angle while playing with raised shoulder and in normal position. RESULTS: The results indicate that the absolute values of the resulting force, as well as the forces in the mediolateral, inferosuperior, and anteroposterior directions, are higher in playing the violin with the shoulder raised than in a normal posture. CONCLUSIONS: Elevating the right shoulder while playing the violin may pose a potential problem. Y1 - 2021 U6 - https://doi.org/10.3233/THC-219001 N1 - Veröffentlicht in: Technology and Health Care, vol. 30, no. 1 (Selected Papers From the 13th International Conference BIOMDLORE 2021), pp. 177-186, 2022 ER - TY - JOUR A1 - Glavan, Gašper A1 - Belyaeva, Inna A. A1 - Ruwisch, Kevin A1 - Wollschlaeger, Joachim A1 - Shamonin (Chamonine), Mikhail T1 - Magnetoelectric Response of Laminated Cantilevers Comprising a Magnetoactive Elastomer and a Piezoelectric Polymer, in Pulsed Uniform Magnetic Fields JF - Sensors N2 - The voltage response to pulsed uniform magnetic fields and the accompanying bending deformations of laminated cantilever structures are investigated experimentally in detail. The structures comprise a magnetoactive elastomer (MAE) slab and a commercially available piezoelectric polymer multilayer. The magnetic field is applied vertically and the laminated structures are customarily fixed in the horizontal plane or, alternatively, slightly tilted upwards or downwards. Six different MAE compositions incorporating three concentrations of carbonyl iron particles (70 wt%, 75 wt% and 80 wt%) and two elastomer matrices of different stiffness are used. The dependences of the generated voltage and the cantilever's deflection on the composition of the MAE layer and its thickness are obtained. The appearance of the voltage between the electrodes of a piezoelectric material upon application of a magnetic field is considered as a manifestation of the direct magnetoelectric (ME) effect in a composite laminated structure. The ME voltage response increases with the increasing total quantity of the soft-magnetic filler in the MAE layer. The relationship between the generated voltage and the cantilever's deflection is established. The highest observed peak voltage around 5.5 V is about 8.5-fold higher than previously reported values. The quasi-static ME voltage coefficient for this type of ME heterostructures is about 50 V/A in the magnetic field of approximate to 100 kA/m, obtained for the first time. The results could be useful for the development of magnetic field sensors and energy harvesting devices relying on these novel polymer composites. KW - cantilever KW - composites KW - DEMAGNETIZING FACTORS KW - direct magnetoelectric effect KW - laminated structure KW - magnetic field sensor KW - magnetoactive elastomer KW - piezoelectric polymer Y1 - 2021 U6 - https://doi.org/10.3390/s21196390 N1 - Corresponding authors: Gašper Glavan, Mikhail Shamonin VL - 21 IS - 19 SP - 1 EP - 19 PB - MDPI CY - Basel ER - TY - JOUR A1 - Savelev, Dmitrii V. A1 - Belyaeva, Inna A. A1 - Chashin, Dmitri V. A1 - Fetisov, Leonid Y. A1 - Romeis, Dirk A1 - Kettl, Wolfgang A1 - Kramarenko, Elena Yu A1 - Saphiannikova, Marina A1 - Stepanov, Gennady V. A1 - Shamonin (Chamonine), Mikhail T1 - Giant extensional strain of magnetoactive elastomeric cylinders in uniform magnetic fields JF - Materials N2 - Elongations of magnetoactive elastomers (MAEs) under ascending–descending uniform magnetic fields were studied experimentally using a laboratory apparatus specifically designed to measure large extensional strains (up to 20%) in compliant MAEs. In the literature, such a phenomenon is usually denoted as giant magnetostriction. The synthesized cylindrical MAE samples were based on polydimethylsiloxane matrices filled with micrometer-sized particles of carbonyl iron. The impact of both the macroscopic shape factor of the samples and their magneto-mechanical characteristics were evaluated. For this purpose, the aspect ratio of the MAE cylindrical samples, the concentration of magnetic particles in MAEs and the effective shear modulus were systematically varied. It was shown that the magnetically induced elongation of MAE cylinders in the maximum magnetic field of about 400 kA/m, applied along the cylinder axis, grew with the increasing aspect ratio. The effect of the sample composition is discussed in terms of magnetic filler rearrangements in magnetic fields and the observed experimental tendencies are rationalized by simple theoretical estimates. The obtained results can be used for the design of new smart materials with magnetic-field-controlled deformation properties, e.g., for soft robotics. KW - magnetostriction KW - magnetoactive elastomer KW - extensional strain KW - hysteresis KW - magnetomechanical effect KW - magnetodeformation Y1 - 2020 U6 - https://doi.org/10.3390/ma13153297 SN - 1996-1944 N1 - Corresponding author: Mikhail Shamonin VL - 13 IS - 15 SP - 1 EP - 17 PB - MDPI CY - Basel ER - TY - JOUR A1 - Schuderer, Matthias A1 - Rill, Georg A1 - Schaeffer, Thomas A1 - Schulz, Carsten T1 - Friction modeling from a practical point of view JF - Multibody System Dynamics N2 - AbstractRegularized static friction models have been used successfully for many years. However, they are unable to maintain static friction in detail. For this reason, dynamic friction models have been developed and published in the literature. However, commercial multibody simulation packages such as Adams, RecurDyn, and Simpack have developed their own specific stick-slip models instead of adopting one of the public domain approaches. This article introduces the fundamentals of these commercial models and their behavior from a practical point of view. The stick-slip models were applied to a simple test model and a more sophisticated model of a festoon cable system using their standard parameters. KW - Multibody dynamics KW - Friction KW - Stick-slip effect KW - Adams KW - RecurDyn KW - Simpack Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-72513 SN - 1384-5640 N1 - Corresponding author: Matthias Schuderer PB - Springernature ER - TY - JOUR A1 - Putz, Christoph A1 - Schirmer, Maximilian A1 - Sattler, Robert A1 - Monkman, Gareth J. T1 - Fabrication of Bisphenol-free Boron-Siloxane Polymers JF - Materials Chemistry and Physics N2 - Interest in the preparation of magnetoactive boron-siloxane polymers (MBP) has been stimulated by recent scientific developments. However, recent regulations have prohibited the inclusion of Bisphenol-A normally employed in the manufacture of commercially available products. In the following publication, two different routes for the preparation of magnetoactive borosiloxane polymers have been taken. First, the possibilities of obtaining homogeneous mixtures of magnetoactive polymers by mixing the magnetic particles with the polymer using solid CO2 (dry ice) and stirring (shearing) are investigated. In the course of the work, an approach for the preparation of reference materials of different viscosities was made to prove the transferability to other elastomers. This is then followed by a brief review of the reaction of the polymer with different solvents in relation to the mixing with particles. In manually kneaded compounds, dispersions ranging from 0.00004 to 0.004 particles per mm3 are common. The process described in this work resulted in agglomerations of no greater than 0.00004 particles per mm3 A possible synthesis route for bisphenol-free boron-siloxanes is then considered, in which for the polymer matrix, polydimethylsilanes (dichloro(methyl)silane), boric acid and iron(III)chloride are used for this purpose by polycondensation. Y1 - 2025 U6 - https://doi.org/10.1016/j.matchemphys.2025.130567 N1 - Corresponding author der OTH Regensburg: Gareth J. Monkman PB - Elsevier ET - Journal Pre-proof ER - TY - JOUR A1 - Rill, Georg A1 - Schaeffer, Thomas A1 - Schuderer, Matthias T1 - LuGre or not LuGre JF - Multibody System Dynamics N2 - The LuGre model is widely used in the analysis and control of systems with friction. Recently, it has even been made available in the commercial multibody dynamics simulation software system Adams. However, the LuGre model exhibits well-known drawbacks like too low and force rate-dependent break-away forces, drift problems during sticking periods, and significant differences in non-stationary situations between the pre-defined friction law and the one produced by the LuGre model. In the present literature, these problems are supposed to come from the model dynamics or its nonlinear nature. However, most of these drawbacks are not simple side effects of a dynamic friction model but are caused in the LuGre approach, as shown here, by a too simple and inconsistent model of the bristle dynamics. Standard examples and a more practical application demonstrate that the LuGre model is not a “what you see is what you get” approach. A dynamic friction model with accurate bristle dynamics and consistent friction force is set up here. It provides insight into the physical basis of the LuGre model dynamics. However, it results in a nonlinear and implicit differential equation, whose solution will not be easy because of the ambiguity of the friction characteristics. The standard workaround, a static model based on simple regularized characteristics, produces reliable and generally satisfactory results but definitely cannot maintain a stick. The paper presents a second-order dynamic friction model, which may serve as an alternative. It can maintain a stick and produces realistic and reliable results. KW - Dynamic friction model KW - LuGre model KW - Asymmetric regularization KW - Break-away force KW - Stick-slip KW - Multibody dynamics Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-65653 N1 - Corresponding author: Georg Rill PB - Springer ER - TY - JOUR A1 - Rill, Georg A1 - Schuderer, Matthias T1 - A Second-Order Dynamic Friction Model Compared to Commercial Stick–Slip Models JF - Modelling N2 - Friction has long been an important issue in multibody dynamics. Static friction models apply appropriate regularization techniques to convert the stick inequality and the non-smooth stick–slip transition of Coulomb’s approach into a continuous and smooth function of the sliding velocity. However, a regularized friction force is not able to maintain long-term stick. That is why dynamic friction models were developed in recent decades. The friction force depends herein not only on the sliding velocity but also on internal states. The probably best-known representative, the LuGre friction model, is based on a fictitious bristle but realizes a too-simple approximation. The recently published second-order dynamic friction model describes the dynamics of a fictitious bristle more accurately. It is based on a regularized friction force characteristic, which is continuous and smooth but can maintain long-term stick due to an appropriate shift in the regularization. Its performance is compared here to stick–slip friction models, developed and launched not long ago by commercial multibody software packages. The results obtained by a virtual friction test-bench and by a more practical festoon cable system are very promising. Thus, the second-order dynamic friction model may serve not only as an alternative to the LuGre model but also to commercial stick–slip models. KW - commercial stick–slip friction models KW - dynamic friction model KW - long-term stick KW - multibody dynamics Y1 - 2023 U6 - https://doi.org/10.3390/modelling4030021 SN - 2673-3951 N1 - Corresponding author: Georg Rill VL - 4 IS - 3 SP - 366 EP - 381 PB - MDPI ER - TY - JOUR A1 - Hausladen, Matthias A1 - Schels, Andreas A1 - Asgharzade, Ali A1 - Buchner, Philipp A1 - Bartl, Mathias A1 - Wohlfartsstätter, Dominik A1 - Edler, Simon A1 - Bachmann, Michael A1 - Schreiner, Rupert T1 - Investigation of Influencing Factors on the Measurement Signal of a CMOS Image Sensor for Measuring Field Emission Currents JF - Sensors Y1 - 2025 U6 - https://doi.org/10.3390/s25051529 N1 - Corresponding author der OTH Regensburg: Matthias Hausladen VL - 25 IS - 5 PB - MDPI ER - TY - JOUR A1 - Markov-Glazer, Alon A1 - Elbe, Anne-Marie A1 - Schliermann, Rainer T1 - The use of psychological skills in deaflympic sport JF - European Journal of Adapted Physical Activity N2 - This study explores the use of psychological skills among Deaflympic athletes and aims to provide initial insights into sport psychology practices in this overlooked population. To this end, the frequency of psychological skills’ usage, usage patterns, and differences between subgroups were examined within this population. The Test of Performance Strategies (TOPS) was administered to 84 German Deaflympic athletes (mean age = 28; 27% female) along with biographical questions (e.g., hearing status). The findings indicate that Deaflympic athletes regularly utilize psychological skills in training and competition, displaying similar usage to that of Olympic athletes. However, only a minority of Deaflympic athletes train their skills with professional consultants. Additionally, relaxation techniques were employed rarely in comparison to the other investigated skills. This study’s findings contribute to the foundation of sport psychology research with Deaflympic athletes and underscore the need for a differentiated approach in tailoring interventions for this population. KW - Deaf culture KW - Deaflympian KW - psychological skills training KW - TOPS Y1 - 2024 U6 - https://doi.org/10.5507/euj.2024.012 VL - 17 IS - 15 PB - European Federation of Adapted Physical Activity CY - Olomouc ER - TY - JOUR A1 - Schwarz, Tobias A1 - Pastötter, Angelina A1 - Tran, T. H. A1 - Schlosser, Marc A1 - Kaulen, Corinna A1 - Lechner, Alfred A1 - Slabon, A. A1 - Kammler, Martin T1 - Effect of temperature on the growth of Cupric and Cuprous Nanoparticles in a wet chemical synthesis JF - Materials Letters N2 - Cuprous oxide (Cu2O) and cupric oxide (CuO) particles were synthesized using a wet chemical surfactant free method at different synthesis temperatures from 25 °C to 60 °C. Morphology, size, and chemical composition of the prepared Cu2O particles were analyzed by FESEM, PXRD, and UV-vis. We discovered that the chemical composition of the Cu2O particles remained unaffected by the synthesis temperature. However, morphology and size of the particles showed a strong temperature dependency. This could be attributed to the temperature induced formation of CuO species from the copper hydroxide (Cu(OH)2) precursor which also functions as copper precursor for the Cu2O particle growth. The cupric oxide species was determined to be the main cause for the formation of micrometer sized particles, whereas with the Cu(OH)2 precursor species for the Cu2O particles nanocubes with smaller edge lengths as well as octahedrons were obtained. KW - Crystal structure KW - Crystal growth KW - Nanoparticle KW - Copper oxide Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-79279 VL - 381 PB - Springer Nature ER - TY - JOUR A1 - Vogl, Yannick A1 - Schulz, Carsten A1 - Schaeffer, Thomas A1 - Geiger, Benjamin T1 - Prediction of the wear behavior of a conveyor belt with flexible rollers JF - Multibody System Dynamics N2 - This paper introduces a method to predict wear behavior in conveyor belt systems using a lumped mass modeling approach. While previous research has focused primarily on lateral belt walking, this study shifts attention to belt deformation and its associated wear. Both significantly affect system efficiency and component lifespan. The authors propose using local frictional power as a wear indicator, leveraging its direct relation to frictional work in established wear models. To solely demonstrate the method, the study simulates a conveyor belt with three flexible rollers and a deformable belt modeled through rigid spheres connected by spring-damper elements. The authors visualize frictional power density across the belt width, distinguishing between running and transverse directions. The results demonstrate that the frictional power distribution depends heavily on discretization quality, particularly due to the polygon effect inherent in the lumped mass approach. A convergence analysis reveals the minimum necessary discretization of the belt, ensuring reliable qualitative results. To support the credibility of the work, this study compares theoretical expectations and initial wear observations from a real belt with the results from the shown approach. The plausibility check already shows promising results. The proposed methodology provides an adaptable framework to evaluate wear in belt-like structures. It can be readily adapted to a variety of multibody dynamics applications and integrated into larger MBS models that include the overall drivetrain and engine control. Future work will focus on refining discretization strategies and contact models, as well as validation of the wear model to enable quantitative predictions. Y1 - 2025 U6 - https://doi.org/10.1007/s11044-025-10097-7 SN - 1384-5640 N1 - Die Preprint-Version ist ebenfalls in diesem Repositorium verzeichnet: https://opus4.kobv.de/opus4-oth-regensburg/8194 PB - Springer CY - Cham ER - TY - JOUR A1 - Mendel, Robert A1 - Rauber, David A1 - Souza Jr., Luis Antonio de A1 - Papa, João Paulo A1 - Palm, Christoph T1 - Error-Correcting Mean-Teacher: Corrections instead of consistency-targets applied to semi-supervised medical image segmentation JF - Computers in Biology and Medicine N2 - Semantic segmentation is an essential task in medical imaging research. Many powerful deep-learning-based approaches can be employed for this problem, but they are dependent on the availability of an expansive labeled dataset. In this work, we augment such supervised segmentation models to be suitable for learning from unlabeled data. Our semi-supervised approach, termed Error-Correcting Mean-Teacher, uses an exponential moving average model like the original Mean Teacher but introduces our new paradigm of error correction. The original segmentation network is augmented to handle this secondary correction task. Both tasks build upon the core feature extraction layers of the model. For the correction task, features detected in the input image are fused with features detected in the predicted segmentation and further processed with task-specific decoder layers. The combination of image and segmentation features allows the model to correct present mistakes in the given input pair. The correction task is trained jointly on the labeled data. On unlabeled data, the exponential moving average of the original network corrects the student’s prediction. The combined outputs of the students’ prediction with the teachers’ correction form the basis for the semi-supervised update. We evaluate our method with the 2017 and 2018 Robotic Scene Segmentation data, the ISIC 2017 and the BraTS 2020 Challenges, a proprietary Endoscopic Submucosal Dissection dataset, Cityscapes, and Pascal VOC 2012. Additionally, we analyze the impact of the individual components and examine the behavior when the amount of labeled data varies, with experiments performed on two distinct segmentation architectures. Our method shows improvements in terms of the mean Intersection over Union over the supervised baseline and competing methods. Code is available at https://github.com/CloneRob/ECMT. KW - Semi-supervised Segmentation KW - Mean-Teacher KW - Pseudo-labels KW - Medical Imaging Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-57790 SN - 0010-4825 N1 - Corresponding author der OTH Regensburg: Robert Mendel VL - 154 IS - March PB - Elsevier ER - TY - JOUR A1 - Graßmann, Felix A1 - Mengelkamp, Judith A1 - Brandl, Caroline A1 - Harsch, Sebastian A1 - Zimmermann, Martina E. A1 - Linkohr, Birgit A1 - Peters, Annette A1 - Heid, Iris M. A1 - Palm, Christoph A1 - Weber, Bernhard H. F. T1 - A Deep Learning Algorithm for Prediction of Age-Related Eye Disease Study Severity Scale for Age-Related Macular Degeneration from Color Fundus Photography JF - Ophtalmology N2 - Purpose Age-related macular degeneration (AMD) is a common threat to vision. While classification of disease stages is critical to understanding disease risk and progression, several systems based on color fundus photographs are known. Most of these require in-depth and time-consuming analysis of fundus images. Herein, we present an automated computer-based classification algorithm. Design Algorithm development for AMD classification based on a large collection of color fundus images. Validation is performed on a cross-sectional, population-based study. Participants. We included 120 656 manually graded color fundus images from 3654 Age-Related Eye Disease Study (AREDS) participants. AREDS participants were >55 years of age, and non-AMD sight-threatening diseases were excluded at recruitment. In addition, performance of our algorithm was evaluated in 5555 fundus images from the population-based Kooperative Gesundheitsforschung in der Region Augsburg (KORA; Cooperative Health Research in the Region of Augsburg) study. Methods. We defined 13 classes (9 AREDS steps, 3 late AMD stages, and 1 for ungradable images) and trained several convolution deep learning architectures. An ensemble of network architectures improved prediction accuracy. An independent dataset was used to evaluate the performance of our algorithm in a population-based study. Main Outcome Measures. κ Statistics and accuracy to evaluate the concordance between predicted and expert human grader classification. Results. A network ensemble of 6 different neural net architectures predicted the 13 classes in the AREDS test set with a quadratic weighted κ of 92% (95% confidence interval, 89%–92%) and an overall accuracy of 63.3%. In the independent KORA dataset, images wrongly classified as AMD were mainly the result of a macular reflex observed in young individuals. By restricting the KORA analysis to individuals >55 years of age and prior exclusion of other retinopathies, the weighted and unweighted κ increased to 50% and 63%, respectively. Importantly, the algorithm detected 84.2% of all fundus images with definite signs of early or late AMD. Overall, 94.3% of healthy fundus images were classified correctly. Conclusions Our deep learning algoritm revealed a weighted κ outperforming human graders in the AREDS study and is suitable to classify AMD fundus images in other datasets using individuals >55 years of age. KW - Senile Makuladegeneration KW - Krankheitsverlauf KW - Mustererkennung KW - Maschinelles Lernen Y1 - 2018 U6 - https://doi.org/10.1016/j.ophtha.2018.02.037 N1 - Corresponding authors: Bernhard H. F. Weber, University of Regensburg, and Christoph Palm VL - 125 IS - 9 SP - 1410 EP - 1420 PB - Elsevier ER - TY - JOUR A1 - Maier, Johannes A1 - Perret, Jerome A1 - Simon, Martina A1 - Schmitt-Rüth, Stephanie A1 - Wittenberg, Thomas A1 - Palm, Christoph T1 - Force-feedback assisted and virtual fixtures based K-wire drilling simulation JF - Computers in Biology and Medicine N2 - One common method to fix fractures of the human hand after an accident is an osteosynthesis with Kirschner wires (K-wires) to stabilize the bone fragments. The insertion of K-wires is a delicate minimally invasive surgery, because surgeons operate almost without a sight. Since realistic training methods are time consuming, costly and insufficient, a virtual-reality (VR) based training system for the placement of K-wires was developed. As part of this, the current work deals with the real-time bone drilling simulation using a haptic force-feedback device. To simulate the drilling, we introduce a virtual fixture based force-feedback drilling approach. By decomposition of the drilling task into individual phases, each phase can be handled individually to perfectly control the drilling procedure. We report about the related finite state machine (FSM), describe the haptic feedback of each state and explain, how to avoid jerking of the haptic force-feedback during state transition. The usage of the virtual fixture approach results in a good haptic performance and a stable drilling behavior. This was confirmed by 26 expert surgeons, who evaluated the virtual drilling on the simulator and rated it as very realistic. To make the system even more convincing, we determined real drilling feed rates through experimental pig bone drilling and transferred them to our system. Due to a constant simulation thread we can guarantee a precise drilling motion. Virtual fixtures based force-feedback calculation is able to simulate force-feedback assisted bone drilling with high quality and, thus, will have a great potential in developing medical applications. KW - Handchirurgie KW - Osteosynthese KW - Operationstechnik KW - Lernprogramm KW - Virtuelle Realität KW - Medical training system KW - Virtual fixtures KW - Virtual reality KW - Force-feedback haptic KW - Minimally invasive hand surgery KW - K-wire drilling Y1 - 2019 U6 - https://doi.org/10.1016/j.compbiomed.2019.103473 N1 - Corresponding author: Christoph Palm VL - 114 SP - 1 EP - 10 PB - Elsevier ER - TY - JOUR A1 - Rückert, Tobias A1 - Rückert, Daniel A1 - Palm, Christoph T1 - Methods and datasets for segmentation of minimally invasive surgical instruments in endoscopic images and videos: A review of the state of the art JF - Computers in Biology and Medicine N2 - In the field of computer- and robot-assisted minimally invasive surgery, enormous progress has been made in recent years based on the recognition of surgical instruments in endoscopic images and videos. In particular, the determination of the position and type of instruments is of great interest. Current work involves both spatial and temporal information, with the idea that predicting the movement of surgical tools over time may improve the quality of the final segmentations. The provision of publicly available datasets has recently encouraged the development of new methods, mainly based on deep learning. In this review, we identify and characterize datasets used for method development and evaluation and quantify their frequency of use in the literature. We further present an overview of the current state of research regarding the segmentation and tracking of minimally invasive surgical instruments in endoscopic images and videos. The paper focuses on methods that work purely visually, without markers of any kind attached to the instruments, considering both single-frame semantic and instance segmentation approaches, as well as those that incorporate temporal information. The publications analyzed were identified through the platforms Google Scholar, Web of Science, and PubMed. The search terms used were “instrument segmentation”, “instrument tracking”, “surgical tool segmentation”, and “surgical tool tracking”, resulting in a total of 741 articles published between 01/2015 and 07/2023, of which 123 were included using systematic selection criteria. A discussion of the reviewed literature is provided, highlighting existing shortcomings and emphasizing the available potential for future developments. KW - Deep Learning KW - Minimal-invasive Chirurgie KW - Bildsegmentierung KW - Surgical instrument segmentation KW - Surgical instrument tracking KW - Spatio-temporal information KW - Endoscopic surgery KW - Robot-assisted surgery Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-69830 N1 - Corresponding author: Tobias Rückert N1 - Corrigendum unter: https://opus4.kobv.de/opus4-oth-regensburg/frontdoor/index/index/docId/7033 VL - 169 PB - Elsevier CY - Amsterdam ER - TY - CHAP A1 - Höng, Simon K. A1 - Wiederer, Jonas A1 - Eder, Friedrich A1 - Obergriesser, Mathias A1 - Linner, Thomas T1 - Towards AI-enhanced facade planning : integrating human expertise with machine learning-driven parametric modeling T2 - EC³ & CIB W78 : 2025 European Conference on Computing in Construction & 42nd CIB W78 IT in Construction Conference N2 - Planning modern facade systems is complex, requiring optimization across multiple domains.This paper proposes an AI-enhanced workflow for facade planning, harnessing computer vision and human input via a Large Language Model.A generative AI system then guides a parametric model to produce 3D facade designs. Automated checks provide feedback to a Reinforcement Learning system, to iteratively determine optimal solutions.These solutions are verified and finalized by human expertise, ensuring improved outcomes with reduce planning time and effort.The approach illustrates how combining advanced AI methods with human expertise can address the multifactorial challenges of facade design within current industry practices. Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-84862 SN - 978-9-083451-31-2 SN - 2684-1150 VL - 6 SP - 192 EP - 199 PB - European Council for Computing in Construction ER - TY - JOUR A1 - Maerkl, Raphaela A1 - Rueckert, Tobias A1 - Rauber, David A1 - Gutbrod, Max A1 - Weber Nunes, Danilo A1 - Palm, Christoph T1 - Enhancing generalization in zero-shot multi-label endoscopic instrument classification JF - International Journal of Computer Assisted Radiology and Surgery N2 - Purpose Recognizing previously unseen classes with neural networks is a significant challenge due to their limited generalization capabilities. This issue is particularly critical in safety-critical domains such as medical applications, where accurate classification is essential for reliability and patient safety. Zero-shot learning methods address this challenge by utilizing additional semantic data, with their performance relying heavily on the quality of the generated embeddings. Methods This work investigates the use of full descriptive sentences, generated by a Sentence-BERT model, as class representations, compared to simpler category-based word embeddings derived from a BERT model. Additionally, the impact of z-score normalization as a post-processing step on these embeddings is explored. The proposed approach is evaluated on a multi-label generalized zero-shot learning task, focusing on the recognition of surgical instruments in endoscopic images from minimally invasive cholecystectomies. Results The results demonstrate that combining sentence embeddings and z-score normalization significantly improves model performance. For unseen classes, the AUROC improves from 43.9% to 64.9%, and the multi-label accuracy from 26.1% to 79.5%. Overall performance measured across both seen and unseen classes improves from 49.3% to 64.9% in AUROC and from 37.3% to 65.1% in multi-label accuracy, highlighting the effectiveness of our approach. Conclusion These findings demonstrate that sentence embeddings and z-score normalization can substantially enhance the generalization performance of zero-shot learning models. However, as the study is based on a single dataset, future work should validate the method across diverse datasets and application domains to establish its robustness and broader applicability. KW - Generalized zero-shot learning KW - Sentence embeddings KW - Z-score normalization KW - Multi-label classification KW - Surgical instruments Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-85674 N1 - Corresponding author der OTH Regensburg: Raphaela Maerkl VL - 20 SP - 1577 EP - 1587 PB - Springer Nature ER - TY - JOUR A1 - Esper, Lukas A1 - Schultheiss, Ulrich A1 - Grad, Marius A1 - Noster, Ulf A1 - Bund, Andreas T1 - Application of the Hull Cell for Identifying Electropolishing Parameters to Adjust Surface Morphology in Additive Manufacturing JF - ECS Advances N2 - Additively processed materials are increasingly used to manufacture customized parts, e.g. medical implants. Implant surfaces often require a smooth finish, which can be achieved by post-processing and well-defined process parameters. In this study, the effects of electropolishing of metal parts produced by laser powder bed fusion are investigated using Hull cell experiments and a three-electrode setup. Current density voltage curves were measured with the three-electrode setup to identify the regimes for electropolishing. Subsequently different constant-currents were applied and Hull cell experiments were conducted. The surface roughness (Sz, Sa) and the mass removal were analysed. Surface morphologies were assessed using laser scanning and scanning electron microscopy. A reduction of the initial surface roughness of more than 90% to Sa < 0.3 μm has been achieved. Considering the passed electrical charge during electropolishing, results from Hull cell experiments are systematically correlated with current-controlled electropolishing. This approach enables the precise tailoring of polishing parameters to achieve surfaces with defined roughness. Furthermore, the study demonstrates the suitability of Hull cells in determining electropolishing parameters for additive materials and highlights their contribution to post-processing in additive manufacturing. Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-86295 SN - 2754-2734 N1 - Corresponding author der OTH Regensburg: Lukas Esper VL - 4 IS - 4 PB - The Electrochemical Society ER - TY - JOUR A1 - Greiner, Nina A1 - Lauer, Norina A1 - Schedel, Valentin A1 - Pfingsten, Andrea T1 - Group rehabilitation for adults with acquired neurological disorders: A systematic review of mono- and interdisciplinary interventions in physical and speech-language therapy JF - PM&R N2 - Background: Group treatments and interdisciplinary collaboration are recommended in evidence-based guidelines for neurorehabilitation, including physical and speech-language therapy. Evidence suggests that activating overlapping neural networks for upper extremity motor control and speechlanguage processing produces synergistic effects during therapy. This systematic review aims to overview and appraise the efficacy of group treatments in traditional rehabilitation and telerehabilitation. In addition to summarizing evidence on monodisciplinary approaches in physical and speech-language therapy, it seeks data on integrative approaches involving one or both disciplines to inform further interdisciplinary collaboration. Methods: The review was registered with PROSPERO (CRD42021288012) and followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. Systematic searches were conducted in PubMed, CINAHL, and the Cochrane Library. Two reviewers independently screened studies, extracted data, and assessed quality using AMSTAR 2, the Physiotherapy Evidence Database (PEDro) scale, or the Joanna Briggs Institute (JBI) Checklist, as appropriate. The evidence was summarized in a systematic narrative synthesis and its certainty rated based on the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) approach. Results: A total of 29 studies were included: 16 on speech-language therapy (861 participants) and 13 on physical therapy (1757 participants). No studies addressed interdisciplinary group interventions, and only two evaluated group telerehabilitation. Outcome domains and measures varied across studies and the certainty of evidence was predominantly low. However, moderate-certainty evidence supports that group speech-language therapy improves quality of life, communication, and language in stroke survivors, especially when interventions emphasize verbal production in communicative settings with multimodal materials and cueing. In physical therapy, circuit class training may be more effective than other group approaches for enhancing quality of life and mobility. Conclusion: Group treatments in neurorehabilitation show some benefits, but further research is needed – especially regarding interdisciplinary approaches and telerehabilitation. KW - Gruppentherapie KW - Logopädie KW - Physiotherapie KW - Neurologie KW - systematic review KW - group treatment KW - interdisciplinary collaboration KW - speech-language therapy KW - physical therapy Y1 - 2025 U6 - https://doi.org/10.1002/pmrj.70006 N1 - Corresponding author der OTH Regensburg: Nina Greiner PB - Wiley ER - TY - JOUR A1 - Barthel, Mareike A1 - Süß, Franz A1 - Dendorfer, Sebastian T1 - Application of a transformer encoder for the prediction of intra-abdominal pressure JF - Computer Methods in Biomechanics and Biomedical Engineering N2 - Intra-abdominal pressure is a significant physiological parameter influencing spinal stability and pelvic floor health. This study investigates the potential of a transformer encoder model to predict IAP using motion capture data and musculoskeletal modeling. Data from 211 subjects performing walking, fast walking, and running were used to train a transformer encoder. The model showed promising results with an overall Mean Absolute Percentage Error of 13.5% and a Pearson correlation coefficient of 0.85. Predictions for fast walking and running proved to be more challenging compared to walking, which was attributed to the greater variability and complexity of faster movements. KW - Intra-abdominal pressure KW - transformer encoder KW - machine learning KW - motion capture KW - musculoskeletal modeling Y1 - 2025 U6 - https://doi.org/10.1080/10255842.2025.2586143 N1 - Corresponding author der OTH Regensburg: Mareike Barthel PB - Taylor & Francis ER - TY - JOUR A1 - Currle, Edda A1 - Haug, Sonja A1 - Weber, Karsten T1 - Akzeptanz des Einsatzes von Künstlicher Intelligenz im Anamneseprozess: Ergebnisse einer Bevölkerungsbefragung in Deutschland JF - Zeitschrift für Evidenz, Fortbildung und Qualität im Gesundheitswesen N2 - Hintergrund und Zielsetzung Zunehmend werden digitale Anamneseverfahren, wie z. B. Chatbots, entwickelt und evaluiert, sind jedoch in Arztpraxen in Deutschland noch nicht flächendeckend implementiert. Ziel dieser Arbeit ist die Erhebung der Akzeptanz der Bevölkerung in Deutschland gegenüber KI-gestützten Verfahren im Anamneseprozess, durch die es möglich wird, Rückschlüsse auf die Nutzung der Verfahren und ihre Eignung als Bestandteil von Digitalisierungsstrategien der Praxen zu ziehen. Methode Die Studie basiert auf einer Onlinebefragung der Bevölkerung in Deutschland (Feldphase 18.-24.11.2024, n = 1.000). Zurückgehend auf die „Unified Theory of Acceptance and Use of Technology“ (UTAUT) wurden drei zentrale Hypothesen zur Nutzung von Künstlicher Intelligenz (KI) im Anamneseprozess aufgestellt und mit linearen Regressionsmodellen getestet. Ergebnisse Die Akzeptanz für die Nutzung von KI-gestützten Systemen fällt in beiden untersuchten Szenarien, der Nutzung eines Chatbots zu Hause und der Nutzung eines Chatbots in einer Arztpraxis, hoch aus. Dabei bestätigen sich die erwarteten Zusammenhänge von Leistungserwartung, Aufwandserwartung und erwartetem Sozialem Einfluss mit der Verhaltensabsicht, einen Chatbot in der Arztpraxis oder vor dem Besuch einer Arztpraxis zu nutzen. Die Einflüsse von Alter, Geschlecht oder Erfahrung mit der Technologie zeigen jedoch nicht die vermuteten Zusammenhänge. Diskussion und Schlussfolgerung Die Praktikabilität ist von entscheidender Bedeutung für eine positive Einstellung gegenüber der Nutzung. Dabei zeigt sich kein Unterschied zwischen den Geschlechtern. Bei der Implementierung von Chatbots im Anamneseprozess sollten die Aspekte Praktikabilität, Datenschutz und Datensicherheit eine wesentliche Rolle spielen. Angesichts der Tatsache, dass ein großer Teil der älteren Bevölkerung in Deutschland nach wie vor über begrenzte Erfahrung mit digitalen Technologien verfügt, ist Gebrauchstauglichkeit für diese Bevölkerungsgruppe sowie für Menschen mit Beeinträchtigungen von hoher Relevanz. N2 - Background and objectives Digital tools for medical history-taking, such as chatbots, are increasingly being developed and evaluated but have not yet been implemented across the board in medical practices in Germany. The aim of this study was to survey the acceptance of AI-supported tools for medical history-taking among the German population, thereby allowing conclusions to be drawn about the use of these tools and their suitability as part of digitalization strategies in medical practices. Method The study is based on an online survey among the German population (fieldwork November 18 to 24, 2024, n = 1,000). Based on the ‘Unified Theory of Acceptance and Use of Technology’ (UTAUT), three central hypotheses on the use of artificial intelligence (AI) in the medical history-taking process were generated and tested using linear regression models. Results In the two scenarios examined — patients using a chatbot at home and at the doctor’s office — there was a high level of acceptance for the use of AI-supported systems. The expected relationships between Performance Expectancy, Effort Expectancy and expected Social Influence with the behavioral intention to use a chatbot either in the doctor’s office or before visiting the doctor’s office have been confirmed. However, influential factors such as age, gender, or experience with technology do not show the expected correlations. Discussion and conclusion Practicability is crucial for a favorable attitude towards AI applications. There were no apparent gender differences. When implementing chatbots in the medical history-taking process, the aspects of practicability, data protection, and data security should play a key role. Given that a large number of the elderly in Germany still have limited experience with digital technologies, usability is highly relevant for both this population group and for people with disabilities. T2 - Acceptance of artificial intelligence tools for medical history-taking: Findings of a population survey in Germany KW - Künstliche Intelligenz KW - Anamnese KW - Technologieakzeptanz KW - UTAUT KW - Bevölkerungsumfrage Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-86715 N1 - Corresponding author der OTH Regensburg: Edda Currle VL - 198-199 SP - 9 EP - 17 PB - Elsevier ER - TY - JOUR A1 - Weiherer, Maximilian A1 - Eigenberger, Andreas A1 - Egger, Bernhard A1 - Brébant, Vanessa A1 - Prantl, Lukas A1 - Palm, Christoph T1 - Learning the shape of female breasts: an open-access 3D statistical shape model of the female breast built from 110 breast scans JF - The Visual Computer N2 - We present the Regensburg Breast Shape Model (RBSM)—a 3D statistical shape model of the female breast built from 110 breast scans acquired in a standing position, and the first publicly available. Together with the model, a fully automated, pairwise surface registration pipeline used to establish dense correspondence among 3D breast scans is introduced. Our method is computationally efficient and requires only four landmarks to guide the registration process. A major challenge when modeling female breasts from surface-only 3D breast scans is the non-separability of breast and thorax. In order to weaken the strong coupling between breast and surrounding areas, we propose to minimize the variance outside the breast region as much as possible. To achieve this goal, a novel concept called breast probability masks (BPMs) is introduced. A BPM assigns probabilities to each point of a 3D breast scan, telling how likely it is that a particular point belongs to the breast area. During registration, we use BPMs to align the template to the target as accurately as possible inside the breast region and only roughly outside. This simple yet effective strategy significantly reduces the unwanted variance outside the breast region, leading to better statistical shape models in which breast shapes are quite well decoupled from the thorax. The RBSM is thus able to produce a variety of different breast shapes as independently as possible from the shape of the thorax. Our systematic experimental evaluation reveals a generalization ability of 0.17 mm and a specificity of 2.8 mm. To underline the expressiveness of the proposed model, we finally demonstrate in two showcase applications how the RBSM can be used for surgical outcome simulation and the prediction of a missing breast from the remaining one. Our model is available at https://www.rbsm.re-mic.de/. KW - Statistical shape model KW - Non-rigid surface registration KW - Breast imaging KW - Surgical outcome simulation KW - Breast reconstruction surgery Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-30506 N1 - Corresponding author: Christoph Palm N1 - Zugehörige arXiv-Publikation: https://opus4.kobv.de/opus4-oth-regensburg/frontdoor/index/index/docId/2023 VL - 39 IS - 4 SP - 1597 EP - 1616 PB - Springer Nature ER - TY - JOUR A1 - Brébant, Vanessa A1 - Weiherer, Maximilian A1 - Noisser, Vivien A1 - Seitz, Stephan A1 - Prantl, Lukas A1 - Eigenberger, Andreas T1 - Implants Versus Lipograft: Analysis of Long-Term Results Following Congenital Breast Asymmetry Correction JF - Aesthetic Plastic Surgery N2 - Aims Congenital breast asymmetry represents a particular challenge to the classic techniques of plastic surgery given the young age of patients at presentation. This study reviews and compares the long-term results of traditional breast augmentation using silicone implants and the more innovative technique of lipografting. Methods To achieve this, we not only captured subjective parameters such as satisfaction with outcome and symmetry, but also objective parameters including breast vol-ume and anthropometric measurements. The objective examination was performed manually and by using the Vectra H2 photogrammetry scanning system. Results Differences between patients undergoing either implant augmentation or lipograft were revealed not to be significant with respect to patient satisfaction with surgical outcome (p= 0.55) and symmetry (p= 0.69). Furthermore, a breast symmetry of 93 % was reported in both groups. Likewise, no statistically significant volume difference between the left and right breasts was observed in both groups (p\0.41). However, lipograft patients needed on average 2.9 procedures to achieve the desired result, compared with 1.3 for implant augmentation. In contrast, patients treated with implant augmentation may require anumber of implant changes during their lifetime. Conclusion Both methods may be considered for patients presenting with congenital breast asymmetry. KW - Congenital Breast Asymmetry KW - 3D volumetry KW - Autologous fat injections KW - Three-dimensional imaging KW - Lipograft Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-32404 N1 - Corresponding author der OTH Regensburg: Vanessa Brébant VL - 46 SP - 2228 EP - 2236 PB - Springer Nature ER - TY - JOUR A1 - Maier, Johannes A1 - Weiherer, Maximilian A1 - Huber, Michaela A1 - Palm, Christoph T1 - Imitating human soft tissue on basis of a dual-material 3D print using a support-filled metamaterial to provide bimanual haptic for a hand surgery training system JF - Quantitative Imaging in Medicine and Surgery N2 - Background: Currently, it is common practice to use three-dimensional (3D) printers not only for rapid prototyping in the industry, but also in the medical area to create medical applications for training inexperienced surgeons. In a clinical training simulator for minimally invasive bone drilling to fix hand fractures with Kirschner-wires (K-wires), a 3D-printed hand phantom must not only be geometrically but also haptically correct. Due to a limited view during an operation, surgeons need to perfectly localize underlying risk structures only by feeling of specific bony protrusions of the human hand. Methods: The goal of this experiment is to imitate human soft tissue with its haptic and elasticity for a realistic hand phantom fabrication, using only a dual-material 3D printer and support-material-filled metamaterial between skin and bone. We present our workflow to generate lattice structures between hard bone and soft skin with iterative cube edge (CE) or cube face (CF) unit cells. Cuboid and finger shaped sample prints with and without inner hard bone in different lattice thickness are constructed and 3D printed. Results: The most elastic available rubber-like material is too firm to imitate soft tissue. By reducing the amount of rubber in the inner volume through support material (SUP), objects become significantly softer. Without metamaterial, after disintegration, the SUP can be shifted through the volume and thus the body loses its original shape. Although the CE design increases the elasticity, it cannot restore the fabric form. In contrast to CE, the CF design increases not only the elasticity but also guarantees a local limitation of the SUP. Therefore, the body retains its shape and internal bones remain in its intended place. Various unit cell sizes, lattice thickening and skin thickness regulate the rubber material and SUP ratio. Test prints with higher SUP and lower rubber material percentage appear softer and vice versa. This was confirmed by an expert surgeon evaluation. Subjects adjudged pure rubber-like material as too firm and samples only filled with SUP or lattice structure in CE design as not suitable for imitating tissue. 3D-printed finger samples in CF design were rated as realistic compared to the haptic of human tissue with a good palpable bone structure. Conclusions: We developed a new dual-material 3D print technique to imitate soft tissue of the human hand with its haptic properties. Blowy SUP is trapped within a lattice structure to soften rubber-like 3D print material, which makes it possible to reproduce a realistic replica of human hand soft tissue. KW - Dual-material 3D printing KW - Hand surgery training KW - Metamaterial KW - Support material KW - Tissue-imitating hand phantom KW - Handchirurgie KW - 3D-Druck KW - Biomaterial KW - Lernprogramm Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-979 N1 - Corresponding author: Christoph Palm VL - 9 IS - 1 SP - 30 EP - 42 PB - AME Publishing Company ER - TY - JOUR A1 - Maier, Johannes A1 - Weiherer, Maximilian A1 - Huber, Michaela A1 - Palm, Christoph T1 - Optically tracked and 3D printed haptic phantom hand for surgical training system JF - Quantitative Imaging in Medicine and Surgery N2 - Background: For surgical fixation of bone fractures of the human hand, so-called Kirschner-wires (K-wires) are drilled through bone fragments. Due to the minimally invasive drilling procedures without a view of risk structures like vessels and nerves, a thorough training of young surgeons is necessary. For the development of a virtual reality (VR) based training system, a three-dimensional (3D) printed phantom hand is required. To ensure an intuitive operation, this phantom hand has to be realistic in both, its position relative to the driller as well as in its haptic features. The softest 3D printing material available on the market, however, is too hard to imitate human soft tissue. Therefore, a support-material (SUP) filled metamaterial is used to soften the raw material. Realistic haptic features are important to palpate protrusions of the bone to determine the drilling starting point and angle. An optical real-time tracking is used to transfer position and rotation to the training system. Methods: A metamaterial already developed in previous work is further improved by use of a new unit cell. Thus, the amount of SUP within the volume can be increased and the tissue is softened further. In addition, the human anatomy is transferred to the entire hand model. A subcutaneous fat layer and penetration of air through pores into the volume simulate shiftability of skin layers. For optical tracking, a rotationally symmetrical marker attached to the phantom hand with corresponding reference marker is developed. In order to ensure trouble-free position transmission, various types of marker point applications are tested. Results: Several cuboid and forearm sample prints lead to a final 30 centimeter long hand model. The whole haptic phantom could be printed faultless within about 17 hours. The metamaterial consisting of the new unit cell results in an increased SUP share of 4.32%. Validated by an expert surgeon study, this allows in combination with a displacement of the uppermost skin layer a good palpability of the bones. Tracking of the hand marker in dodecahedron design works trouble-free in conjunction with a reference marker attached to the worktop of the training system. Conclusions: In this work, an optically tracked and haptically correct phantom hand was developed using dual-material 3D printing, which can be easily integrated into a surgical training system. KW - Handchirurgie KW - 3D-Druck KW - Lernprogramm KW - Zielverfolgung KW - HaptiVisT KW - Dual-material 3D printing KW - hand surgery training KW - metamaterial KW - tissue imitating phantom hand Y1 - 2020 U6 - https://doi.org/10.21037/qims.2019.12.03 N1 - Corresponding author: Christoph Palm VL - 10 IS - 02 SP - 340 EP - 455 PB - AME Publishing Company CY - Hong Kong, China ER - TY - JOUR A1 - Ebigbo, Alanna A1 - Mendel, Robert A1 - Probst, Andreas A1 - Manzeneder, Johannes A1 - Souza Jr., Luis Antonio de A1 - Papa, João Paulo A1 - Palm, Christoph A1 - Messmann, Helmut T1 - Computer-aided diagnosis using deep learning in the evaluation of early oesophageal adenocarcinoma JF - GuT N2 - Computer-aided diagnosis using deep learning (CAD-DL) may be an instrument to improve endoscopic assessment of Barrett’s oesophagus (BE) and early oesophageal adenocarcinoma (EAC). Based on still images from two databases, the diagnosis of EAC by CAD-DL reached sensitivities/specificities of 97%/88% (Augsburg data) and 92%/100% (Medical Image Computing and Computer-Assisted Intervention [MICCAI] data) for white light (WL) images and 94%/80% for narrow band images (NBI) (Augsburg data), respectively. Tumour margins delineated by experts into images were detected satisfactorily with a Dice coefficient (D) of 0.72. This could be a first step towards CAD-DL for BE assessment. If developed further, it could become a useful adjunctive tool for patient management. KW - Speiseröhrenkrebs KW - Diagnose KW - Computerunterstütztes Verfahren KW - Maschinelles Lernen Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-68 N1 - Corresponding authors: Alanna Ebigbo and Christoph Palm VL - 68 IS - 7 SP - 1143 EP - 1145 PB - British Society of Gastroenterology ER - TY - JOUR A1 - Safi, Hila A1 - Bandic, Medina A1 - Niedermeier, Christoph A1 - Almudever, Carmen G. A1 - Feld, Sebastian A1 - Mauerer, Wolfgang T1 - Stacking the odds: full-stack quantum system design space exploration JF - EPJ Quantum Technology N2 - Design space exploration (DSE) plays an important role in optimising quantum circuit execution by systematically evaluating different configurations of compilation strategies and hardware settings. In this paper, we conduct a comprehensive investigation into the impact of various layout methods, qubit routing techniques, and optimisation levels, as well as device-specific properties such as different variants and strengths of noise and imperfections, the topological structure of qubits, connectivity densities, and back-end sizes. By spanning through these dimensions, we aim to understand the interplay between compilation choices and hardware characteristics. A key question driving our exploration is whether the optimal selection of device parameters, mapping techniques, comprising of initial layout strategies and routing heuristics can mitigate device induced errors beyond standard error mitigation approaches. Our results show that carefully selecting software strategies (e.g., mapping and routing algorithms) and tailoring hardware characteristics (such as minimising noise and leveraging topology and connectivity density) significantly improve the fidelity of circuit execution outcomes, and thus the expected correctness or success probability of the computational result. We provide estimates based on key metrics such as circuit depth, gate count and expected fidelity. Our results highlight the importance of hardware–software co-design, particularly as quantum systems scale to larger dimensions, and along the way towards fully error corrected quantum systems: Our study is based on computationally noisy simulations, but considers various implementations of quantum error correction (QEC) using the same approach as for other algorithms. The observed sensitivity of circuit fidelity to noise and connectivity suggests that co-design principles will be equally critical when integrating QEC in future systems. Our exploration provides practical guidelines for co-optimising physical mapping, qubit routing, and hardware configurations in realistic quantum computing scenarios. Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-85157 N1 - Corresponding author der OTH Regensburg: Hila Safi VL - 12 PB - Springer CY - Heidelberg ER - TY - CHAP A1 - Graf, Julian A1 - Hachani, Murad A1 - Fischer, Sebastian A1 - Hackenberg, Rudolf T1 - A heuristic packet processing model for improved encrypted network analysis T2 - CSCS '25: Proceedings of the 2nd Cyber Security in CarS Workshop N2 - Modern networked systems, such as those in the automotive sector, face increasing complexity and growing attack surfaces due to the rise of interconnected and data-driven technologies. Detecting malicious behavior in these environments requires efficient and scalable methods that can operate reliably despite limited resources and high communication volumes. This paper proposes a heuristic packet processing model designed to support intrusion detection based on structural and temporal characteristics of encrypted network traffic. The model follows a modular architecture consisting of four key phases: recording, sorting, prioritizing, and analyzing. At the core of the approach is the Polymetric Queueing Topology Space, a feature space that combines statistical and time series attributes derived from model structure and flow data. These features serve as input for machine learning models, which can effectively distinguish between benign and intrusion traffic patterns without relying on packet data beyond the transport layer. The approach was evaluated using the publicly available ToN_IoT dataset and demonstrated that reliable classification is achievable using a subset of the developed feature space that contains model-derived traffic features. We used Random Forest for supervised binary and multi-class classification achieving high accuracy scores of 99% for binary and 98% for multi-class classification. Additionally, for unsupervised anomaly detection, we created an Isolation Forest model accomplishing F1-scores of 0.92 for the benign and 0.96 for intrusion class. The architecture is designed to enable dynamic traffic prioritization and to offer a flexible foundation that can observe diverse network domains while maintaining efficient performance under constrained computational conditions. Y1 - 2025 U6 - https://doi.org/10.1145/3736130.3764510 PB - ACM CY - New York, USA ER - TY - JOUR A1 - Heberl, Michael A1 - Hofrichter, Andreas A1 - Rank, Daniel A1 - Bauer, Franz A1 - Sterner, Michael T1 - Influence of plant dimensioning and location on the ecology of PEM electrolysis JF - International Journal of Hydrogen Energy N2 - PV and wind systems with PEM electrolysis offer great potential for producing hydrogen with low emissions. Our research has identified the ecologically optimal size of PEM in relation to fixed PV/wind capacities. We calculate efficiencies and production volumes for PEM with 240 capacity and site variations. We analyse the global warming potential of all systems and draw conclusions about the optimal system design. The lowest GWP is achieved at the site with the highest full load hours with 1.32 kg CO2-eq/kg H2 (Wind, 28 MW electrolysis) and 4.24 kg CO2-eq/kg H2 (PV, 23 MW electrolysis). We have identified a clear trend: increasing PV/wind full load hours leads to higher ideal PEM capacities. However, there is a significant discrepancy between the ideal economic and ecological capacity. Furthermore, higher electrolysis capacities can achieve lower emissions as they increasingly operate at a more efficient partial load. KW - Electrolysis KW - Life cycle analysis KW - Global warming potential KW - Plant design KW - Renewable energy Y1 - 2025 U6 - https://doi.org/10.1016/j.ijhydene.2025.151039 SN - 0360-3199 VL - 167 PB - Elsevier ER - TY - CHAP A1 - Stocker, Philipp A1 - Lehrer, Tobias A1 - Duddeck, Fabian A1 - Wagner, Marcus T1 - Face-wise prediction of sheet-metal drawability using graph neural networks T2 - Journal of Physics: Conference Series N2 - The early design phase of deep-drawn structural components involves time-consuming iterative development. Traditional drawability assessments rely on finite element simulations, which are computationally expensive and slow the design process. Alternative machine learning (ML) approaches show promise in accelerating this process but face challenges with existing methods. Existing low-dimensional ML models only provide global predictions without identifying specific geometric regions prone to failure. High-dimensional models provide local predictions but require significant amounts of training data. We propose a data-driven approach leveraging graph neural networks (GNNs) for face-wise drawability prediction of sheet metal components in their computer-aided design (CAD) representation. Our method aims to bridge the gap between the computational efficiency of ML and the spatial resolution of simulation by providing face-wise insight into potential failure regions. This study utilises a dataset of parametric U-channel geometries with variability in both geometry and topology. Ground-truth labels are generated using inverse analysis simulations. Geometric entities are represented through the use of UV parameterisations, whereby 3D surfaces are mapped into 2D space to facilitate geometric encoding. Concurrently, the topological relationships are captured using a face adjacency graph. To address data scarcity, we evaluate how different amounts of training data affect model performance and perform ablation studies to analyse the impact of different CAD representation features. Our results show that the proposed approach achieves high accuracy even with limited training data. In addition, the ablation studies provide insights into the most critical CAD features, guiding future research. These results highlight the potential of our GNN to predict face-wise drawability in the early design phase. Y1 - 2025 U6 - https://doi.org/10.1088/1742-6596/3104/1/012053 SN - 1742-6588 N1 - Corresponding author der OTH Regensburg: Philipp Stocker VL - 3104 IS - 1 PB - IOP Publishing ER - TY - JOUR A1 - Hantsch, Carolin A1 - Westner, Markus A1 - Matschi, Markus T1 - IT/OT-Konvergenz: Status-Quo und Umsetzungsempfehlungen JF - HMD Praxis der Wirtschaftsinformatik N2 - Organisationen machen große Anstrengungen zur Verbesserung ihrer Ambidextrie, d. h. ihrer Fähigkeit sowohl Exploitationsziele (z. B. Effizienz, Vorhersagbarkeit) als auch Explorationsziele (z. B. Anpassbarkeit, Innovation) zu erreichen. Obwohl gemäß der Praxisliteratur Technologie in Software-Projekten dabei eine zentrale Rolle spielen kann, gibt es kaum Forschung dazu, wie technologische Faktoren Ambidexterie in Software-Projekten beeinflussen. In dieser Studie untersuchen wir die Rolle dreier technologischer Faktoren: kontinuierliche Integration, Standardisierung und Microservice-Architektur. Die Ergebnisse einer Mehrinformanten-Umfrage in 95 Projekten in der Schweiz und Dänemark zeigen, dass kontinuierliche Integration und Standardisierung mit höherer Ambidexterie einhergehen, während der Zusammenhang zwischen Microservice-Architektur und Ambidextrie nicht signifikant ist. Unser Artikel geht über die existierende Forschung hinaus, indem er zeigt, dass kontinuierliche Integration und Standardisierung nicht nur Exploitation, sondern auch Exploration fördern können. Wir diskutieren auch Gründe für den insignifikanten Zusammenhang zwischen Microservice-Architektur und Ambidextrie. N2 - This study examines IT/OT Convergence in 31 predominantly large German companies. It presents an “IT/OT Governance Framework” as a specific model for successful convergence implementation. The analysis reveals a heterogeneous level of convergence maturity across the examined companies, the majority of which are at the beginning or in the implementation phase. Close cooperation between IT and OT is favored, but without IT completely taking over OT. An IT/OT tandem consisting of a CIO and a central OT responsible person is seen as the ideal way to take responsibility. Six specific recommendations were derived from the interviews and included in the IT/OT Governance Framework developed. These include ensuring top management support, using security as a driver, introducing a central OT responsible person, bringing IT and OT teams physically closer together, continuously demonstrating the added value of convergence, and taking a step-by-step approach to implementation. KW - IT/OT Convergence KW - Operational Technology KW - OT KW - Governance Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-77937 N1 - Corresponding author der OTH Regensburg: Markus Westner PB - Springer Nature ER - TY - JOUR A1 - Schmid, Michael T. A1 - Thiel, Charlotte T1 - Is it worth it? Potential for reducing the environmental impact of bitumen roofing membrane production JF - Recycling N2 - Between 51% and 72% of a bituminous roofing membrane used for structural water-proofing consists of organic material, predominantly bitumen - a derivative of crude oil refining - highlighting the strong dependence of this product on fossil resources. Considering that several tonnes of these membranes must be replaced every 30 to 50 years, substantial potential exists for emission reduction through the establishment of circular material systems. This study investigates this potential by analysing 26 Environmental Product Declarations (EPDs) and life cycle datasets from across Europe covering the period from 2007 to 2023. To ensure comparability, all data were normalised to a declared unit of 1 kg of roofing membrane. The reinforcement layers were categorised into glass and polyester & glass composites, and their differences were examined using Welch’s t-tests. Correlative analyses and linear as well as multiple regression models were then applied to explore relationships between environmental indicators and the shares of organic and mineral mass fractions. The findings reveal that renewable energy sources, although currently representing only a small share of total production energy, provide a major lever for reducing nearly all environmental impact categories. The type of reinforcement layer was also found to influence the demand for fossil resources, both materially and energetically. For most environmental indicators, only multiple regression models can explain at least 30% of the variance based on the proportions of organic and mineral inputs. Overall, the study underscores the crucial importance of high-quality, transparently documented product data for accurately assessing the sustainability of building products. It further demonstrates that substituting fossil energy carriers with renewable sources and optimising material efficiency can substantially reduce environmental burdens, provided that methodological consistency and clarity of indicator definitions are maintained. KW - bitumen sealing KW - bitumen recycling KW - circular construction KW - correlation analysis KW - LCA Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-86873 N1 - Corresponding author der OTH Regensburg: Michael Schmid VL - 10 IS - 6 PB - MDPI ER - TY - JOUR A1 - Bedbur, Stefan A1 - Kamps, Udo A1 - Schmiedt, Anja Bettina T1 - A flexible model of ordered random variables for non-metallic inclusions in steels and related statistical inference JF - Applied Mathematical Modelling N2 - In a data set of non-metallic inclusion sizes in samples from engineering steel, common order statistics fail to serve as a suitable model for ascendingly ordered measurements within single samples. Therefore, a flexible model of ordered random variables is proposed, which allows for changes of distributions described by model parameters. Joint maximum likelihood estimation of these parameters and the shape parameter of an underlying left-truncated Weibull distribution is considered, and a model test is developed for the null-hypothesis of common order statistics being an adequate model. To overcome small data situations, a link-function approach is examined in order to reduce the number of involved model parameters as well as to propose to use a link-function parameter as a material indicator. An asymptotic test is provided to check for the presence of a linear link function, and tests for hypotheses about two link-function parameters are studied. Moreover, the construction of simultaneous confidence regions for the link-function parameters as well as of confidence bands for the entire graph of the link function are presented. Throughout, the findings are applied to the real metallurgical data set. Similar problems and data structures arise in other fields of material science and applications such as geology. Y1 - 2026 U6 - https://doi.org/10.1016/j.apm.2025.116284 SN - 0307-904X N1 - Corresponding author der OTH Regensburg: Anja Bettina Schmiedt VL - 149 PB - Elsevier ER -