TY - JOUR A1 - Weber, Karsten A1 - Haug, Sonja T1 - Wie verhält sich der typische MP3-Nutzer? JF - Der Musikmarkt Y1 - 2001 SP - 26 EP - 27 ER - TY - JOUR A1 - Weber, Karsten A1 - Haug, Sonja T1 - Geocaching und Raumnutzung BT - Freizeitbeschäftigung mit Konfliktpotenzial JF - Standort - Zeitschrift für angewandte Geographie N2 - Geocaching ist eine Art internetbasierte Schnitzeljagd, die im öffentlichen Raum stattfindet. Der Artikel erläutert die Funktionsweise des Geocaching als Freizeitbeschäftigung und beschreibt anhand einer Datenerhebung die Verbreitung in Deutschland. Mit den stark steigenden Teilnehmerzahlen gehen Konflikte bei der Nutzung des öffentlichen Raums – insbesondere sind hiervon naturnahe Räume wie Wälder betroffen – und von Privatbesitz einher. Die Konfliktfelder werden exemplarisch aufgeführt, die Herausforderungen für die angewandte Geographie dargelegt. Durch die Anwendung neuer Technologien wie des GPS im Freizeitbereich bildet sich eine neue Form der Raumnutzung heraus. Damit verbunden sind für die angewandte Geographie noch weitgehend ungenutzte Möglichkeiten der Stadtentwicklung, des Regionalmanagements oder der Bildung. Zugleich treten mit der zunehmenden Verbreitung des Geocaching neue Konfliktfelder der Raumnutzung offen zu Tage. Y1 - 2012 U6 - https://doi.org/10.1007/s00548-012-0195-3 VL - 36 IS - 1 SP - 17 EP - 24 ER - TY - JOUR A1 - Weber, Karsten A1 - Haug, Sonja A1 - Altenbuchner, Amelie A1 - Zachmayer, Tobias T1 - Impfbereitschaft, Impfskepsis und Impfung in der COVID-19-Pandemie JF - GWP - Gesellschaft. Wirtschaft. Politik N2 - Der Beitrag fasst sozialwissenschaftliche Erkenntnisse zur Impfbereitschaft und Impfung mit einem COVID-19 Vakzin zusammen. Diskutiert werden Impfskepsis und Einflussfaktoren wie Sozialstruktur, Verschwörungsüberzeugungen, kollektive Verantwortung, Einstellungen zu alternativen Heilverfahren und zur Impfpflicht. KW - Impfung KW - Verschwörungsüberzeugung KW - Verantwortung KW - Corona-Pandemie Y1 - 2022 U6 - https://doi.org/10.3224/gwp.v71i2.08 IS - 2 SP - 192 EP - 204 PB - Budrich ER - TY - JOUR A1 - Weber, Karsten A1 - Haug, Sonja A1 - Dotter, Caroline T1 - Forschung: Speichern, freigeben, weiterleiten, ...? - Gesundheitdatennutzung: Was wollen die Menschen? JF - Health & care management N2 - In Deutschland werden 402 medizinische Register geführt, darunter ein Herzklappenregister und ein In-vitro-Fertilisationsregister. Doch nicht alle medizinischen Daten, für die der Bedarf eines Registers identifiziert wurde, sind tatsächlich verfügbar. So wird z.B. seit längerem ein nationales Mortalitätsregister gefordert und im Unterschied zu anderen europäischen Ländern existiert in Deutschland kein Impfregister. Dabei sind Gesundheitsdaten unerlässlich für medizinische Forschung, Versorgungsforschung oder Epidemiologie; deren Verfügbarkeit kann zur bedarfsgerechten Gesundheitsversorgung beitragen. Ein Element, um die aktuelle Situation zu verbessern, stellt die Nutzung von Daten der (einrichtungsübergreifenden) elektronischen Patientenakte (ePA) in Forschungsdatenzentren dar, ein anderes die Nutzbarkeit medizinischer Register. Um belastbare Aussagen über die Bereitschaft der bundesdeutschen Bevölkerung treffen zu können, ob und welche Gesundheitsdaten für Forschungszwecke in Registern freigegeben würden, wurde im Zeitraum vom 01.06. bis zum 27.06.2022 eine computergestützte Telefonbefragung (Dual-Frame) bei einer Zufallsstichprobe der deutschen erwachsenen Gesamtbevölkerung durchgeführt (n=1.308). Der Fragebogen bestand aus 46 standardisierten Fragen. Die Telefonbefragung stellt einen Bevölkerungsquerschnitt dar; im Gegensatz zu Online-Befragungen ermöglicht dies, auch Personen mit geringer Internetaffinität einzubeziehen. Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-66847 SN - 2191-2432 VL - 14 IS - 6 SP - 72 EP - 75 PB - Holzmann Medien CY - Bad Wörishofen ER - TY - CHAP A1 - Weber, Karsten A1 - Kleine, Nadine ED - Boylan, Michael ED - Teays, Wanda T1 - Cybersecurity in health care T2 - Ethics in the AI, Technology, and Information Age Y1 - 2022 SN - 978-1-5381-6076-3 SP - 233 EP - 256 PB - Rowman & Littlefield CY - Lanham ER - TY - CHAP A1 - Weber, Karsten A1 - Kleine, Nadine ED - Heinlein, Michael ED - Huchler, Norbert T1 - Normierung, Regulierung, Governance: Wie, von wem und mit welchen Mitteln kann der Einsatz Künstlicher Intelligenz gesellschaftlich gestaltet werden? T2 - Künstliche Intelligenz, Mensch und Gesellschaft: Soziale Dynamiken und gesellschaftliche Folgen einer technologischen Innovation N2 - Künstliche Intelligenz (KI) stellt eine Schlüsseltechnologie des gesellschaftlichen Wandels im 21. Jahrhundert dar. Mittlerweile werden zahlreiche technologische Anwendungen genutzt, die auf maschinellem Lernen und den damit verbundenen Möglichkeiten der Datensamm¬lung, -nutzung und -verwertung aufbauen. Indem KI große Datenmengen beherrschbar und verborgene Muster und Zusammenhänge sichtbar macht, wird vieles schneller, einfacher und effizienter – sei es im Alltag, in der Arbeit oder in Organisationen. Offen bleibt jedoch nach wie vor die Frage, welche tiefgreifenden und teilweise latenten Folgen für den Menschen als soziales Wesen und das gesellschaftliche Zusammenleben mit dem Einsatz und der Entwick¬lung von KI verbunden sind. Wie wandelt sich das Verhältnis von Mensch und Technik durch KI und wie ist dieser Wandel zu bewerten? Welche Chancen, aber auch Risiken eröffnen sich durch den Einsatz und die Entwicklung von KI für Mensch und Gesellschaft? Welchen Grenzen unterliegt der Wandel und welche Gestaltungsmöglichkeiten bieten sich? Und nicht zuletzt: Was und wer bestimmt die Entwicklungspfade, die KI nimmt – mit welchen Folgen und für wen? KW - Digital Sociology KW - Techniksoziologie KW - STS KW - Künstliche intelligenz KW - Sicherheitsforschung KW - Technikphilosophie KW - Methoden der KI-Forschung KW - Technisierung von Arbeit KW - Governance KW - Soziale Dynamik von Künstlicher Intelligenz KW - Akteure im KI-Diskurs KW - Theorie sozialen Handelns KW - Social Inequality KW - KI und gesellschaftlicher Wandel Y1 - 2024 SN - 978-3-658-43521-9 U6 - https://doi.org/10.1007/978-3-658-43521-9_8 SP - 179 EP - 198 PB - Springer ER - TY - JOUR A1 - Weber, Karsten A1 - Krug, Henriette A1 - Haug, Sonja A1 - Kühn, Andrea A. A1 - Scharf, Anna T1 - External Observations and Subjective Experiences: Metaphors Used by DBS Patients JF - AJOB Neuroscience Y1 - 2023 U6 - https://doi.org/10.1080/21507740.2023.2246219 VL - 14 IS - 3 SP - 323 EP - 325 PB - Taylor&Francis ER - TY - JOUR A1 - Weber, Karsten A1 - Loi, Michele A1 - Christen, Markus A1 - Kleine, Nadine T1 - Digital Medicine, Cybersecurity, and Ethics BT - An Uneasy Relationship JF - American Journal of Bioethics Y1 - 2018 U6 - https://doi.org/10.1080/15265161.2018.1498935 VL - 18 IS - 9 SP - 52 EP - 53 PB - Taylor&Francis ER - TY - JOUR A1 - Weber, Karsten A1 - Nagenborg, Michael A1 - Drüeke, Ricarda A1 - Langewitz, Oliver T1 - Ubiquitous Media BT - Ökonomische und technische Rahmung sozialer Handlungsmöglichkeiten JF - Merz Medien + Erziehung, Zeitschrift für Medienpädagogik N2 - Die durch das Internet und Web 2.0 mit angestoßene Medienkonvergenz zwingt die Medien- und Contentindustrie zur stetigen Bereitstellung neuer medialer Inhalte; die stetig wachsende Nachfrage zu decken wird über deren unternehmerischen Erfolg entscheiden. Es wird ein Szenario entwickelt, in dem die Konsumenten gleichzeitig Produzenten der In- halte sind und dabei Kommunikationsinfrastrukturen wie Mobiltelefone nutzen. Es werden die weitreichenden sozialen Konsequenzen dieser Entwicklung skizziert. Y1 - 2009 UR - https://www.researchgate.net/publication/235550940_Ubiquitous_Media_-_Okonomische_und_technische_Rahmung_sozialer_Handlungsmoglichkeiten VL - 53 IS - 6 SP - 102 EP - 110 ER - TY - JOUR A1 - Weber, Karsten A1 - Pallas, Frank A1 - Ulbricht, Max-R. T1 - Challenges of Citizen Science: Commons, Incentives, Organizations, and Regulations JF - American Journal of Bioethics Y1 - 2019 U6 - https://doi.org/10.1080/15265161.2019.1619862 VL - 19 IS - 8 SP - 52 EP - 54 ER - TY - JOUR A1 - Weber, Karsten A1 - Pallas, Frank A1 - Ulbricht, Max-R. T1 - Quantified Self, Participatory Sensing und die Grenzen der Regulierung JF - Jahrbuch für Recht und Ethik N2 - One of the aims of technology assessment is to inform policy makers about possible future developments of technology, about their likelihood, and about the most probable impacts on individuals as well as on the fabric of society. Such information could be used to plan and create adequate regulations to minimize negative and maximize positive effects of the corresponding technology. However, certain innovations, which we call bottom up-innovations in this paper, make it quite difficult if not almost impossible to provide information of the kind technology assessment shall produce. After introducing the dichotomy of top down-and bottom up-innovations and bringing these types of innovation in the context of more established notions of innovation on a theoretical level we will use the examples of the quantified self-movement and the idea of participatory sensing to describe bottom up-innovations as they take place in real life. By depicting these examples we will try to identify some of the social consequences of the technology that is used in each of the contexts mentioned above. Finally, we will try to draw some more general conclusions concerning bottom up-innovations and technology assessment and its ability to provide reliable information with regard to possible futures. We shall argue that regulation of technology resulting from bottom up-innovations must go " beyond markets and state ". Y1 - 2015 IS - 23 SP - 75 EP - 94 ER - TY - JOUR A1 - Weber, Karsten A1 - Scorna, Ulrike A1 - George, Wolfgang Michael T1 - Ethische Dimensionen der Begleitung Sterbender BT - Eine qualitative Erhebung der Bedingungen des Sterbeprozesses in deutschen Pflegeeinrichtungen JF - Pflege & Gesellschaft N2 - Wie Untersuchungen zeigen, beeinträchtigen nicht medizinisch indizierte Verlegungen die Lebens- und Versorgungsqualität Sterbender stark. Das Projekt Avenue-Pal hat das Ziel, Leitlinien zu entwickeln, die diese unnötigen Verlegungen reduzieren sollen. Die hier vorgestellte Begleitstudie untersucht aus ethischer Sicht die im Sterbe- und Verlegungsprozess stattfinden Abläufe sowie deren potenziellen Gestaltungsmöglichkeiten. Mittels einer Literaturrecherche, der Teilnahme an einem Fokusgruppengespräch und einer modifizierten MEESTAR-Befragung werden die Bedingungen für eine optimale Betreuung Sterbender sowie für ein würdevolles Sterben identifiziert und die aktuellen Abläufe im Rahmen des Verlegungsmanagements vor und während der Implementierung der Leitlinien unter Berücksichtigung der ethischen Dimensionen Selbstverständnis, Selbstbestimmung, Fürsorge, Gerechtigkeit, Privatheit und Teilhabe analysiert. Die Ergebnisse der Untersuchung zeigen, dass Verlegungen v.a. aus Unsicherheiten, mangelndem palliativmedizinischem Wissen oder Personalmangel resultieren und dass die Etablierung der Leitlinien und eines palliativen Konsildienstes besonders die fachliche Kompetenz des Personal stärkt und dadurch unnötige Verlegungen reduziert werden konnten. Y1 - 2022 U6 - https://doi.org/10.3262/P&G2204337 SN - 1430-9653 VL - 27 IS - 4 SP - 337 EP - 354 PB - Beltz Juventa CY - Weinheim ER - TY - CHAP A1 - Weber, Karsten A1 - Scorna, Ulrike A1 - George, Wolfgang Michael ED - Frewer, Andreas ED - Franzò, Kerstin ED - Langmann, Elisabeth T1 - Die Zukunft des Sterbens im Krankenhaus. Eine Reflektion zu besseren Wegen für Patient*innen T2 - Die Zukunft von Medizin und Gesundheitswesen. Prognosen - Visionen - Utopien Y1 - 2021 SN - 978-3-8260-7484-4 SP - 75 EP - 94 PB - Königshausen & Neumann CY - Würzburg ER - TY - GEN A1 - Weber, Karsten A1 - Sonar, Arne A1 - Gerhards, Helene A1 - Bittner, Uta A1 - Krug, Henriette A1 - Reuter-Oppermann, Melanie A1 - Pumplun, Luisa A1 - Müller, Helene A1 - Buxmann, Peter A1 - Schneider, Diana A1 - Zoglauer, Thomas ED - Sonar, Arne ED - Weber, Karsten T1 - Künstliche Intelligenz und Gesundheit BT - Ethische, philosophische und sozialwissenschaftliche Explorationen N2 - Der Einsatz von künstlicher Intelligenz im Gesundheitsbereich verspricht besonders großen Nutzen durch eine bessere Versorgung sowie effizientere Abläufe und bietet damit letztlich auch ökonomische Vorteile. Dem stehen unter anderem Befürchtungen entgegen, dass sich durch den Einsatz von künstlicher Intelligenz das Arzt-Patienten-Verhältnis verändern könnte, Arbeitsplätze gefährdet seien oder die Ökonomisierung des Gesundheitswesens einen weiteren Schub erfahren könnte. Zuweilen wird die Debatte um diese Technologie, zumal in der Öffentlichkeit, emotional und fern sachlicher Argumente geführt. Die Autorinnen und Autoren untersuchen die Geschichte des KI-Einsatzes in der Medizin, deren öffentliche Wahrnehmung, Governance der KI, die Möglichkeiten und Grenzen der Technik sowie Einsatzgebiete, die bisher noch nicht oder nur wenig im Fokus der Aufmerksamkeit waren. Dabei erweist sich die KI als leistungsfähiges Werkzeug, das zahlreiche ethische und soziale Fragen aufwirft, die bei der Einführung anderer Technologien bereits gestellt wurden; allerdings gibt es auch neue Herausforderungen, denen sich Professionen, Politik und Gesellschaft stellen müssen. KW - Ethik KW - Künstliche Intelligenz KW - Gesundheit KW - Technikfolgenabschätzung Y1 - 2022 SN - 978-3-515-12977-0 U6 - https://doi.org/10.25162/9783515129770 PB - Franz Steiner CY - Stuttgart ER - TY - CHAP A1 - Weber, Karsten A1 - Wackerbarth, Alena ED - Marquardt, Gesine T1 - Partizipative Technikgestaltung altersgerechter Wohnumgebungen BT - Akzeptanzerhöhung und Berücksichtigung normativer Überlegungen T2 - MATI: Mensch-Architektur-Technik-Interaktion für demografische Nachhaltigkeit N2 - Noch immer vollzieht sich Technikentwicklung in erster Linie produktorientiert, Partizipation und Akzeptanz werden wenig berücksichtigt. Dabei hängt der Produkterfolg maßgeblich von der Akzeptanz der Nutzer ab. Grundannahme des folgenden Texts ist, dass bei Einbindung möglichst vieler Stakeholder in die Entwicklung von Technik diese noch vor Markteinführung verbessert werden kann und somit ein größerer Erfolg sowie eine nachhaltige Implementierung zu erwarten ist. Es werden Akzeptanzmodelle vorgestellt, die sich durch eine immer stärkere Einbeziehung der Nutzer auszeichnen. Danach wird ein ethisches Evaluierungsmodell skizziert, das im Kontext altersgerechter Assistenzsysteme bereits umfänglich genutzt wird. Zuletzt wird der Versuch unternommen Akzeptanzmodelle und ethische Evaluierungswerkzeuge zu integrieren, um einen Beitrag zur Entwicklung von besser an die Erwartungen der Stakeholder angepassten altersgerechten Assistenzsystemen zu leisten und dadurch deren Akzeptanz zu erhöhen. Y1 - 2015 UR - https://www.researchgate.net/publication/304743121 SP - 158 EP - 171 PB - Fraunhofer IRB Verlag CY - Stuttgart ER - TY - CHAP A1 - Weber, Karsten A1 - Wackerbarth, Alena ED - Maring, Matthias T1 - Partizipative Technikgestaltung altersgerechter Assistenzsysteme als Verfahren der angewandten Ethik T2 - Vom Praktisch-Werden der Ethik in interdisziplinärer Sicht Y1 - 2015 SN - 978-3-7315-0325-5 U6 - https://doi.org/10.5445/KSP/1000044975 SP - 300 EP - 313 PB - KIT Scientific Publishing CY - Karlsruhe ER - TY - CHAP A1 - Weber, Karsten A1 - Wackerbarth, Alena ED - Pfannstiel, Mario A. ED - Krammer, Sandra ED - Swoboda, Walter T1 - Methoden der ethischen Evaluierung digitalisierter Dienstleistungen in der Pflege T2 - Digitale Transformation von Dienstleistungen im Gesundheitswesen III N2 - Ambient-Assisted-Living- (AAL) bzw. altersgerechte Assistenzsysteme sollen in der Pflege alter und hochbetagter Menschen, aber auch anderer physisch oder psychisch gehandicapter Personen, eingesetzt werden. Damit dieser Einsatz nicht zu sozialen und normativen Konflikten führt, muss die Technik so gestaltet werden, dass die in der Gesellschaft verankerten normativen Prinzipien ebenso wie die subjektiven Erwartungen der prospektiven Anwender adressiert werden. Diese Aufgabe gehört in den Bereich der Technikbewertung und partizipativen Technikgestaltung. Dazu gehören Methoden der ethischen Evaluierung der zu entwickelnden Technik, um Konfliktfelder identifizieren und mögliche Lösungsvorschläge entwickeln zu können, die dann in die Gestaltung der Technik einfließen sollten. Nachdem kurz auf die Herkunft altersgerechter Systeme und auf allgemeine normative Fragen des Einsatzes solcher Systeme eingegangen wurde, werden im Folgenden vier Verfahren zur Technikbewertung und partizipativen Technikgestaltung präsentiert, Bezüge zur Akzeptanzforschung hergestellt sowie kurz die Reichweite und die Grenzen ethischer Evaluierung behandelt. KW - Altengerechte Technik KW - AAL-Technik KW - Technikbewertung KW - Technikgestaltung Y1 - 2017 SN - 978-3-658-13642-0 U6 - https://doi.org/10.1007/978-3-658-13642-0_5 SP - 71 EP - 86 PB - Springer Gabler CY - Wiesbaden ER - TY - CHAP A1 - Weber, Karsten A1 - Wackerbarth, Alena ED - Hofstedt, Petra ED - Meer, Klaus ED - Schmitt, Ingo T1 - Partizipative Gestaltung verlässlicher Assistenzsysteme für die Pflege alter und hochbetagter Menschen T2 - Informatik'2015: 45. Jahrestagung der Gesellschaft für Informatik, Informatik, Energie und Umwelt, Tagung von 28. September - 2. Oktober 2015 in Cottbus N2 - Ambient Assisted Living- (AAL) bzw. altersgerechte Assistenzsysteme sollen in der Pflege alter und hochbetagter Menschen, aber auch anderer physisch oder psychisch gehandicapter Personen, eingesetzt werden. Dafür müssen diese Systeme hochverlässlich sein, aber gleichzeitig auch Erwartungen erfüllen, die weniger im technischen und stärker im sozialen Bereich angesiedelt sind. Nach einer kurzen Einführung der Geschichte dieser Systeme und der Beschreibung des Stands der Technik soll auf verschiedene Evaluationswerkzeuge eingegangen werden, die dazu genutzt werden können, eine partizipative Technikgestaltung von AAL-Systemen zu unterstützen Y1 - 2015 SP - 1247 EP - 1249 PB - Gesellschaft für Informatik CY - Bonn ER - TY - BOOK A1 - Weber, Karsten A1 - Zoglauer, Thomas T1 - Verbesserte Menschen N2 - Was zunächst nur als verheißungsvolle Utopie am Zukunftshorizont der Gentechnik aufschien, ist längst dem bioethischen Diskurs entwachsen und konfrontiert uns mit grundlegenden Fragen unseres menschlichen Selbstverständnisses: die Verbesserung und zunehmende Technisierung des Menschen. In diesem Band wird das Thema Enhancement aus sozialphilosophischer und technikphilosophischer Perspektive behandelt. Thomas Zoglauer zeichnet die wesentlichen ethischen Argumentationslinien dieser Debatte nach und setzt sich kritisch mit dem Enhancement unter den Aspekten der Freiheit, sozialen Gerechtigkeit, Chancengleichheit und menschlichen Wohlergehens auseinander. Karsten Weber zeigt wie das Konzept des Cyborgs von der Science-Fiction-Literatur geprägt wurde und als utopisches Leitbild die Medizin- und Neurotechnik beeinflusst hat. Als Folge dieser Entwicklung beginnen sich die Unterschiede zwischen Mensch und Maschine und die damit verbundenen anthropologischen Dichotomien aufzulösen, was auch Konsequenzen für unser Menschenbild und die normative Bewertung des Enhancements hat. Y1 - 2015 SN - 978-3-495-48591-0 PB - Alber CY - Münster ER - TY - CHAP A1 - Weber, Karsten A1 - Zoglauer, Thomas ED - Bendel, Oliver T1 - Maschinenethik und Technikethik T2 - Handbuch Maschinenethik N2 - Der Eigenständigkeitsanspruch der Maschinenethik steht und fällt mit der Frage, ob man autonome Maschinen als moralische Agenten betrachten kann. Zur Beantwortung dieser Frage wird untersucht, unter welchen Voraussetzungen man Maschinen als moralische Agenten betrachten und ob man Maschinen Autonomie und Verantwortungsfähigkeit zusprechen kann. Die Autoren kommen zu dem Schluss, dass es in absehbarer Zukunft zwar keine „moralische Maschinen“ geben mag, es aber Aufgabe der Maschinenethik sein sollte, Maschinen so zu gestalten, dass sie als quasi-moralische Akteure akzeptiert werden können. Dabei dürfen jedoch jene menschlichen Akteure, die entsprechende Maschinen gestalten, entwickeln, bauen und nutzen, nicht aus ihrer Verantwortung entlassen werden. KW - Verantwortung KW - Autonomie KW - Moralische Agenten KW - Turing-Test KW - Akteur-Netzwerk-Theorie KW - Ethik KW - Künstliche Intelligenz KW - Mensch-Maschine-System KW - Autonomes System Y1 - 2018 SN - 978-3-658-17484-2 U6 - https://doi.org/10.1007/978-3-658-17484-2_10-1 SP - 1 EP - 19 PB - Springer VS CY - Wiesbaden ER - TY - CHAP A1 - Weber, Karsten A1 - Zoglauer, Thomas ED - Bendel, Oliver T1 - Maschinenethik und Technikethik T2 - Handbuch Maschinenethik N2 - Der Eigenständigkeitsanspruch der Maschinenethik steht und fällt mit der Frage, ob man autonome Maschinen als moralische Agenten betrachten kann. Zur Beantwortung dieser Frage wird untersucht, unter welchen Voraussetzungen man Maschinen als moralische Agenten betrachten und ob man Maschinen Autonomie und Verantwortungsfähigkeit zusprechen kann. Die Autoren kommen zu dem Schluss, dass es in absehbarer Zukunft zwar keine „moralische Maschinen“ geben mag, es aber Aufgabe der Maschinenethik sein sollte, Maschinen so zu gestalten, dass sie als quasi-moralische Akteure akzeptiert werden können. Dabei dürfen jedoch jene menschlichen Akteure, die entsprechende Maschinen gestalten, entwickeln, bauen und nutzen, nicht aus ihrer Verantwortung entlassen werden. KW - Verantwortung KW - Autonomie KW - Moralische Agenten KW - Turing-Test KW - Akteur-Netzwerk-Theorie Y1 - 2019 SN - 978-3-658-17482-8 U6 - https://doi.org/10.1007/978-3-658-17483-5_10 VL - 12 SP - 145 EP - 163 PB - Springer Fachmedien CY - Wiesbaden ER - TY - JOUR A1 - Weber, Markus A1 - Merle, Christian A1 - Nawabi, Danyal H. A1 - Dendorfer, Sebastian A1 - Grifka, Joachim A1 - Renkawitz, Tobias T1 - Inaccurate offset restoration in total hip arthroplasty results in reduced range of motion JF - Scientific Reports N2 - Offset restoration in total hip arthroplasty (THA) is associated with postoperative range of motion (ROM) and gait kinematics. We aimed to research into the impact of high offset (HO) and standard stems on postoperative ROM. 121 patients received cementless THA through a minimally-invasive anterolateral approach. A 360° hip ROM analysis software calculated impingement-free hip movement based on postoperative 3D-CTs compared to ROM values necessary for activities of daily living (ADL). The same model was then run a second time after changing the stem geometry between standard and HO configuration with the implants in the same position. HO stems showed higher ROM for all directions between 4.6 and 8.9° (p < 0.001) compared with standard stems but with high interindividual variability. In the subgroup with HO stems for intraoperative offset restoration, the increase in ROM was even higher for all ROM directions with values between 6.1 and 14.4° (p < 0.001) compared to offset underrestoration with standard stems. Avoiding offset underrestoration resulted in a higher amount of patients of over 20% for each ROM direction that fulfilled the criteria for ADL (p < 0.001). In contrast, in patients with standard stems for offset restoration ROM did increase but not clinically relevant by offset overcorrection for all directions between 3.1 and 6.1° (p < 0.001). Offset overcorrection by replacing standard with HO stems improved ROM for ADL in a low number of patients below 10% (p > 0.03). Patient-individual restoration of offset is crucial for free ROM in THA. Both over and underrestoration of offset should be avoided. KW - Adaptive clinical trial KW - Bone imaging Y1 - 2020 U6 - https://doi.org/10.1038/s41598-020-70059-1 VL - 10 IS - 13208 SP - 9 PB - Nature ER - TY - JOUR A1 - Weber, Markus A1 - Suess, Franz A1 - Jerabek, Seth A1 - Meyer, Matthias A1 - Grifka, Joachim A1 - Renkawitz, Tobias A1 - Dendorfer, Sebastian T1 - Kinematic pelvic tilt during gait alters functional cup position in total hip arthroplasty JF - Journal of Orthopaedic Research N2 - Static pelvic tilt impacts functional cup position in total hip arthroplasty (THA). In the current study we investigated the effect of kinematic pelvic changes on cup position. In the course of a prospective controlled trial postoperative 3D-computed tomography (CT) and gait analysis before and 6 and 12 months after THA were obtained in 60 patients. Kinematic pelvic motion during gait was measured using Anybody Modeling System. By fusion with 3D-CT, the impact of kinematic pelvic tilt alterations on cup anteversion and inclination was calculated. Furthermore, risk factors correlating with high pelvic mobility were evaluated. During gait a high pelvic range of motion up to 15.6° exceeding 5° in 61.7% (37/60) of patients before THA was found. After surgery, the pelvis tilted posteriorly by a mean of 4.0 ± 6.6° (p < .001). The pelvic anteflexion led to a mean decrease of −1.9 ± 2.2° (p < .001) for cup inclination and −15.1 ± 6.1° (p < .001) for anteversion in relation to the anterior pelvic plane (APP). Kinematic pelvic changes resulted in a further change up to 2.3° for inclination and up to 12.3° for anteversion. In relation to the preoperative situation differences in postoperative cup position ranged from −4.4 to 4.6° for inclination and from −7.8 to 17.9° for anteversion, respectively. Female sex (p < .001) and normal body weight (p < .001) correlated with high alterations in pelvic tilt. Kinematic pelvic changes highly impact cup anteversion in THA. Surgeons using the APP as reference should aim for a higher anteversion of about 15° due to the functional anteflexion of the pelvis during gait. KW - component position KW - gait analysis KW - kinematics KW - pelvic tilt KW - total hip arthroplasty KW - Hüftgelenkprothese KW - Haltungsfehler KW - Hüftgelenkpfanne Y1 - 2021 U6 - https://doi.org/10.1002/jor.25106 SN - 1554-527X VL - 40 IS - 4 SP - 846 EP - 853 PB - Wiley ER - TY - JOUR A1 - Weber, Markus A1 - Weber, Tim A. A1 - Woerner, Michael A1 - Craiovan, Benjamin A1 - Worlicek, Michael A1 - Winkler, Sebastian A1 - Grifka, Joachim A1 - Renkawitz, Tobias T1 - The impact of standard combined anteversion definitions on gait and clinical outcome within one year after total hip arthroplasty JF - International Orthopaedics N2 - Different target areas within the concept of combined cup and stem anteversion have been published for total hip arthroplasty (THA). We asked whether component positioning according to eight standard combined anteversion rules is associated with (1) more physiological gait patterns, (2) higher improvement of gait variables and (3) better clinical outcome after THA.In a prospective clinical study, 60 patients received cementless THA through an anterolateral MIS approach in a lateral decubitus position. Six weeks postoperatively, implant position was analysed using 3D-CT by an independent external institute. Preoperatively, six and 12 months postoperatively range of motion, normalized walking speed and hip flexion symmetry index were measured using 3D motion-capture gait analysis. Patient-related outcome measures (HHS, HOOS, EQ-5D) were obtained by an observer blinded to 3D-CT results. Eight combined anteversion definitions and Lewinnek's "safe zone" were evaluated regarding their impact on gait patterns and clinical outcome.Combined cup and stem anteversion according to standard combined anteversion definitions as well as cup placement within Lewinnek's "safe zone" did not influence range of motion, normalized walking speed and/or hip flexion symmetry index six and 12 months after THA. Similarly, increase of gait parameters within the first year after THA was comparable between all eight combined anteversion rules. Clinical outcome measures like HHS, HOOS and EQ-5D did not show any benefit for either of the combined anteversion definitions.Standard combined cup and stem anteversion rules do not improve postoperative outcome as measured by gait analysis and clinical scores within one year after THA. KW - Total hip athroplasty KW - Combined anteversion KW - Outcome KW - Gait analysis KW - Hüftgelenkprothese KW - Bewegungsanalyse KW - Gehen KW - Funktionelle Anatomie Y1 - 2015 U6 - https://doi.org/10.1007/s00264-015-2777-8 VL - 39 IS - 12 SP - 2323 EP - 2333 ER - TY - CHAP A1 - Weber Nunes, Danilo A1 - Hammer, Michael A1 - Hammer, Simone A1 - Uller, Wibke A1 - Palm, Christoph T1 - Classification of Vascular Malformations Based on T2 STIR Magnetic Resonance Imaging T2 - Bildverarbeitung für die Medizin 2022: Proceedings, German Workshop on Medical Image Computing, Heidelberg, June 26-28, 2022 N2 - Vascular malformations (VMs) are a rare condition. They can be categorized into high-flow and low-flow VMs, which is a challenging task for radiologists. In this work, a very heterogeneous set of MRI images with only rough annotations are used for classification with a convolutional neural network. The main focus is to describe the challenging data set and strategies to deal with such data in terms of preprocessing, annotation usage and choice of the network architecture. We achieved a classification result of 89.47 % F1-score with a 3D ResNet 18. KW - Deep Learning KW - Magnetic Resonance Imaging KW - Vascular Malformations Y1 - 2022 U6 - https://doi.org/10.1007/978-3-658-36932-3_57 SP - 267 EP - 272 PB - Springer Vieweg CY - Wiesbaden ER - TY - JOUR A1 - Weber, Tim A. A1 - Dendorfer, Sebastian A1 - Bulstra, Sjoerd K. A1 - Grifka, Joachim A1 - Verkerke, Gijsbertus Jacob A1 - Renkawitz, Tobias T1 - Gait six month and one-year after computer assisted Femur First THR vs. conventional THR. Results of a patient- and observer- blinded randomized controlled trial JF - Gait & Posture N2 - A prospective randomized controlled trial is presented that is used to compare gait performance between the computer assisted Femur First (CAS FF) operation method and conventional THR (CON). 60 patients underwent a 3D gait analysis of the lower extremity at pre-operative, 6 months post-operative and twelve months post-operative. Detailed verification experiments were facilitated to ensure the quality of data as well as to avoid over-interpreting of the data. The results confirm a similar data-quality as reported in the literature. Walking speed, range of motion and symmetry thereof improved over the follow-up period, without significant differences between the groups. While all parameters do significantly increase over the follow-up period for both groups, there were no significant differences between them at any given time-point. Patients undergoing CAS FF showed a trend to improved hip flexion angle indicating a possible long-term benefit. KW - Biomechanics KW - Combined anteversion KW - Computer-assisted surgery KW - Femur first KW - Gait analysis Y1 - 2016 U6 - https://doi.org/10.1016/j.gaitpost.2016.06.035 VL - vol. 49 SP - 418 EP - 425 ER - TY - CHAP A1 - Weber, Tim A. A1 - Dendorfer, Sebastian A1 - Dullien, Silvia A1 - Grifka, Joachim A1 - Verkerke, Gijsbertus Jacob A1 - Renkawitz, Tobias T1 - Measuring functional outcome after total hip replacement with subject-specific hip joint loading T2 - Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine N2 - Total hip replacement is an often-performed orthopedic surgical procedure; the amount of procedures undertaken will increase since our life expectancy is growing. In order to optimize function, hip biomechanics should be restored to as near normal as possible. The goal of this pilot study was to determine whether or not it is feasible to compute the vectorial hip reaction force pathways on the head of the prosthesis and the force angles relative to the cup of the prosthesis that occur during gait in total hip replacement patients, serving as an objective measurement of the functional outcome following hip replacement. A three-dimensional gait analysis, measuring ground reaction forces and kinematics, was performed. The data retrieved from the gait analysis was used as the input for the musculoskeletal model to compute vectorial joint reaction forces for data processing. To evaluate the position and orientation of the joint reaction forces, the force path, as well as the force angles for the operated and non-operated joint, has been calculated during the stance phase of the specific leg. The force path for subject 2 on the non-operated side is only located in the posterior-lateral quarter, as is the force path for subject 1. In contrast to this subject, the force path for subject 2 at the operated hip joint can be found only within the anterior quarter of the head of the implant, where it is nearly equally distributed in the medio-lateral half of the prosthesis head. The force-inclination angles on the cup of subject 1, with respect to the plane of the socket face, indicates that the force vector is mainly positioned in the same quadrant when compared with subject 2 (in a cup-fixed coordinate system). The force-anteversion angle behaves similarly to the force-inclination angle, even when the effects are not as pronounced. The proposed methods in this article are aiming to define two functional outcomes of total hip replacement that are related to wear and rim loading. It is accepted that wear is not only a function of time, but a function of use. Owing to the methods listed in this article, we are able to determine a) the applied force and b) the sliding distance (force pathway) in a subject-specific manner. The computed hip-reaction force angles and the distance to the rim cup are a measurement for cup or rim loading, and occurs in the so-called safe-zones. This method may well give us insight into the biomechanical situation during gait, after receiving total hip replacement, that we need to fully understand the mechanisms acting on a hip joint and to prove a possible increase of functional outcome after receiving total hip replacement. KW - total hip replacement KW - subject-specific musculoskeletal modeling KW - functional outcome KW - force pathways KW - force angles KW - critical hip joint loading KW - rim loading KW - cup loading KW - Hüftgelenkprothese KW - Biomechanik KW - Lastverteilung KW - Ganganalyse KW - Simulation Y1 - 2012 U6 - https://doi.org/10.1177/0954411912447728 VL - 226 IS - 12 SP - 939 EP - 946 ER - TY - JOUR A1 - Weber, Tim A. A1 - Dendorfer, Sebastian A1 - Grifka, Joachim A1 - Verkerke, Gijsbertus Jacob A1 - Renkawitz, Tobias ED - Takagi, Michiaki T1 - Does Computer-Assisted Femur First THR Improve Musculoskeletal Loading Conditions? JF - BioMed Research International N2 - We have developed a novel, computer-assisted operation method for minimal-invasive total hip replacement (THR) following the concept of “femur first/combined anteversion,” which incorporates various aspects of performing a functional optimization of the prosthetic stem and cup position (CAS FF). The purpose of this study is to assess whether the hip joint reaction forces and patient’s gait parameters are being improved by CAS FF in relation to conventional THR (CON). We enrolled 60 patients (28 CAS FF/32 CON) and invited them for gait analysis at three time points (preoperatively, postop six months, and postop 12 months). Data retrieved from gait analysis was processed using patient-specific musculoskeletal models. The target parameters were hip reaction force magnitude (hrf), symmetries, and orientation with respect to the cup. Hrf in the CAS FF group were closer to a young healthy normal. Phase-shift symmetry showed an increase in the CAS FF group. Hrf orientation in the CAS FF group was closer to optimum, though no edge or rim-loading occurred in the CON group as well. The CAS FF group showed an improved hrf orientation in an early stage and a trend to an improved long-term outcome. KW - Hüftgelenkprothese KW - Operationstechnik KW - Computerunterstütztes Verfahren KW - Bewegungsapparat KW - Mechanische Belastung Y1 - 2015 U6 - https://doi.org/10.1155/2015/625317 VL - 2015 SP - ID 625317 ER - TY - JOUR A1 - Weber, Tim A1 - Al-Munajjed, Amir Andreas A1 - Verkerke, Gijsbertus Jacob A1 - Dendorfer, Sebastian A1 - Renkawitz, Tobias T1 - Influence of minimally invasive total hip replacement on hip reaction forces and their orientations JF - Journal of Orthopaedic Research N2 - Minimally invasive surgery (MIS) is becoming increasingly popular. Supporters claim that the main advantages of MIS total hip replacement (THR) are less pain and a faster rehabilitation and recovery. Critics claim that safety and efficacy of MIS are yet to be determined. We focused on a biomechanical comparison between surgical standard and MIS approaches for THR during the early recovery of patients. A validated, parameterized musculoskeletal model was set to perform a squat of a 50th percentile healthy European male. A bilateral motion was chosen to investigate effects on the contralateral side. Surgical approaches were simulated by excluding the incised muscles from the computations. Resulting hip reaction forces and their symmetry and orientation were analyzed. MIS THR seemed less influential on the symmetry index of hip reaction forces between the operated and nonoperated leg when compared to the standard lateral approach. Hip reaction forces at peak loads of the standard transgluteal approach were 24% higher on the contralateral side when compared to MIS approaches. Our results suggest that MIS THR contributes to a greater symmetry of hip reaction forces in absolute value as well as force-orientation following THR. KW - THA KW - THR KW - Biomechanics KW - Conventional surgery KW - Early recovery KW - Hüftgelenkprothese KW - Minimal-invasive Chirurgie KW - Biomechanik Y1 - 2014 U6 - https://doi.org/10.1002/jor.22710 VL - 32 IS - 12 SP - 1680 EP - 1687 ER - TY - CHAP A1 - Weber, Tim A1 - Dendorfer, Sebastian A1 - Bulstra, Sjoerd K. A1 - Grifka, Joachim A1 - Verkerke, Gijsbertus Jacob A1 - Renkawitz, Tim T1 - Navigated Femur First Total Hip Arthroplasty leads to improved Biomechanical Outcome after surgery T2 - ORS annual meeting, Las Vegas, USA, 2015 Y1 - 2015 ER - TY - CHAP A1 - Weber, Tim A1 - Dendorfer, Sebastian A1 - Bulstra, Sjoerd K. A1 - Verkerke, Gijsbertus Jacob A1 - Renkawitz, Tobias T1 - Biomechanical Outcome after computer-assisted vs. Conventional THR T2 - ANSYS Conference & 32th CADFEM Users' Meeting 2014, 04.-06. Juni, Nürnberg Y1 - 2014 UR - https://www.researchgate.net/publication/264547774_Biomechanical_outcome_after_computer-assisted_vs_conventional_THR ER - TY - CHAP A1 - Weber, Tim A1 - Dendorfer, Sebastian A1 - Bulstra, Sjoerd K. A1 - Verkerke, Gijsbertus Jacob A1 - Renkawitz, Tobias T1 - Musculoskeletal modeling for orthopedic surgery – Applications and chances T2 - Orthopedics meets Engineering, Regensburg, 2015 Y1 - 2015 ER - TY - CHAP A1 - Weber, Tim A1 - Dendorfer, Sebastian A1 - Grifka, Joachim A1 - Weber, Markus A1 - Wörner, Michael A1 - Dullien, Silvia A1 - Verkerke, Gijsbertus Jacob A1 - Renkawitz, Tobias T1 - Verbessert die computerassistierte Femur First Operationstechnik für die Hüftendoprothetik den muskuloskelettalen Lastfall auf das Hüftgelenk? T2 - DKOU 2015, Deutscher Kongress für Orthopädie und Unfallchirurgie 2015 Y1 - 2015 UR - https://www.researchgate.net/publication/283259007_Verbessert_die_computerassistierte_Femur_First_Operationstechnik_fur_die_Huftendoprothetik_den_muskuloskelettalen_Lastfall_auf_das_Huftgelenk ER - TY - CHAP A1 - Weber, Tim A1 - Dendorfer, Sebastian A1 - Renkawitz, Tobias A1 - Dullien, Silvia A1 - Grifka, Joachim T1 - Clinical gait analysis combined with musculoskeletal modelling – coding a new generation of evaluation instruments T2 - Deutsche Gesellschaft für Biomechanik, Murnau, 2011 Y1 - 2011 ER - TY - JOUR A1 - Weber, Tim A1 - Dullien, Silvia A1 - Grifka, Joachim A1 - Renkawitz, Tobias A1 - Dendorfer, Sebastian T1 - Validation of a Motion Capture Laboratory and a new marker-placement protcol for clinical applications JF - Gait & Posture Y1 - 2013 U6 - https://doi.org/10.1016/j.gaitpost.2013.07.229 VL - 38 IS - Suppl. 1 SP - 113 EP - 114 ER - TY - CHAP A1 - Weber, Tim A1 - Dullien, Silvia A1 - Putzer, Michael A1 - Dendorfer, Sebastian A1 - Renkawitz, Tobias T1 - Biomechanical outcome after computer-assisted vs. conventional THR – study concept and preliminary gait analysis results T2 - GAMMA Workshop, Hannover, 2012 Y1 - 2012 ER - TY - CHAP A1 - Weber, Tim A1 - Renkawitz, Tobias A1 - Bulstra, Sjoerd K. A1 - Grifka, Joachim A1 - Verkerke, Gijsbertus Jacob A1 - Dendorfer, Sebastian T1 - Biomechanics of computer-assisted vs. conventional THR after one year follow up T2 - XXV Congress of the International Society of Biomechanics, Glasgow, UK, 12th-16th July 2015 Y1 - 2015 ER - TY - CHAP A1 - Weber, Tim A1 - Renkawitz, Tobias A1 - Grifka, Joachim A1 - Bulstra, Sjoerd K. A1 - Verkerke, Gijsbertus Jacob A1 - Dendorfer, Sebastian T1 - The musculoskeletal load scenario of computer-assisted Femur-First THR up to one year after surgery T2 - VI International Conference on Computational Bioengineering, Barcelona, Sept. 2015 Y1 - 2015 UR - https://www.researchgate.net/publication/281745827_The_musculoskeletal_load_scenario_of_computer-assisted_Femur-First_THR_up_to_one_year_after_surgery ER - TY - CHAP A1 - Weber, Tim A1 - Stezowski, P. A1 - Dullien, Silvia A1 - Dendorfer, Sebastian T1 - Eine biomechanische Bewertung verschiedener Belastungsszenarios nach der Implantierung einer Hüft-Totalendoprothese T2 - 89. Jahrestagung der Vereinigung der Bayerischen Chirurgen e.V., 25. - 27. Juli 2012, Regensburg T2 - A biomechanical evaluation of different load scenarios after implantation of a total hip replacement Y1 - 2012 ER - TY - CHAP A1 - Weber, Tim A1 - Stezowski, P. A1 - Dullien, Silvia A1 - Putzer, Michael A1 - Dendorfer, Sebastian T1 - Eine biomechanische Bewertung verschiedener Belastungsszenarien nach Implantierung einer Hüft-Totalendoprothese T2 - GAMMA Workshop, Hannover, 2012 Y1 - 2012 ER - TY - JOUR A1 - Wehnes, Harald A1 - Höschl, Michael T1 - Studentische Projekte mit Auftraggebern aus Wirtschaft und Verwaltung virtuell umgesetzt JF - PROJEKTMANAGEMENT AKTUELL / Projektmanagement und Covid-19 N2 - Das Coronavirus (SARS-CoV-2) hat die Hochschulen vor ungeahnte Herausforderungen gestellt. Neben der Lehre mussten auch studentische Projekte ad hoc virtuell durchgeführt werden. Das vermeintliche Problem erwies sich aber als „Türöffner“ für eine intensivere und unkompliziertere Zusammenarbeit zwischen Hochschule und externen Auftraggebern. Die spezifischen Erfahrungen der Universität Würzburg und der OTH Regensburg werden vorgestellt. Die neuen Möglichkeiten bereichern zukünftige Lehrveranstaltungen und geben wertvolle Impulse, auch für Projektarbeit außerhalb der Hochschulen. Die beiden Autoren bieten interessierten Unternehmen und Organisationen eine Zusammenarbeit über studentische Projektarbeiten an. KW - Agilität KW - Digitalisierung KW - externe Auftraggeber KW - Lean Startup KW - Online-Lehre KW - Scrum of Scrums KW - Studierenden-Projekte KW - Wirtschaft und Verwaltung Y1 - 2021 U6 - https://doi.org/10.2357/PM-2021-0003 VL - 32 IS - 1 SP - 11 EP - 18 PB - Narr Francke Attempto Verlag ER - TY - GEN A1 - Weigert, Markus A1 - Beyer, Thomas A1 - Quick, Harald H. A1 - Pietrzyk, Uwe A1 - Palm, Christoph A1 - Müller, Stefan P. T1 - Generation of a MRI reference data set for the validation of automatic, non-rigid image co-registration algorithms T2 - Nuklearmedizin KW - Kernspintomografie KW - Referenzdaten KW - Registrierung KW - Algorithmus Y1 - 2007 VL - 46 IS - 2 SP - A116 ER - TY - GEN A1 - Weigert, Markus A1 - Palm, Christoph A1 - Quick, Harald H. A1 - Müller, Stefan P. A1 - Pietrzyk, Uwe A1 - Beyer, Thomas T1 - Template for MR-based attenuation correction for whole-body PET/MR imaging T2 - Nuklearmedizin KW - Kernspintomografie KW - Positronen-Emissions-Tomografie KW - Bildgebendes Verfahren KW - Schwächung Y1 - 2007 VL - 46 IS - 2 SP - A115 ER - TY - JOUR A1 - Weigert, Markus A1 - Pietrzyk, Uwe A1 - Müller, Stefan P. A1 - Palm, Christoph A1 - Beyer, Thomas T1 - Whole-body PET/CT imaging BT - Combining software- and hardware-based co-registration JF - Zeitschrift für Medizinische Physik N2 - Aim Combined whole-body (WB) PET/CT imaging provides better overall co-registration compared to separate CT and PET. However, in clinical routine local PET-CT mis-registration cannot be avoided. Thus, the reconstructed PET tracer distribution may be biased when using the misaligned CT transmission data for CT-based attenuation correction (CT-AC). We investigate the feasibility of retrospective co-registration techniques to align CT and PET images prior to CT-AC, thus improving potentially the quality of combined PET/CT imaging in clinical routine. Methods First, using a commercial software registration package CT images were aligned to the uncorrected PET data by rigid and non-rigid registration methods. Co-registration accuracy of both alignment approaches was assessed by reviewing the PET tracer uptake patterns (visual, linked cursor display) following attenuation correction based on the original and co-registered CT. Second, we investigated non-rigid registration based on a prototype ITK implementation of the B-spline algorithm on a similar targeted MR-CT registration task, there showing promising results. Results Manual rigid, landmark-based co-registration introduced unacceptable misalignment, in particular in peripheral areas of the whole-body images. Manual, non-rigid landmark-based co-registration prior to CT-AC was successful with minor loco-regional distortions. Nevertheless, neither rigid nor non-rigid automatic co-registration based on the Mutual Information image to image metric succeeded in co-registering the CT and noAC-PET images. In contrast to widely available commercial software registration our implementation of an alternative automated, non-rigid B-spline co-registration technique yielded promising results in this setting with MR-CT data. Conclusion In clinical PET/CT imaging, retrospective registration of CT and uncorrected PET images may improve the quality of the AC-PET images. As of today no validated and clinically viable commercial registration software is in routine use. This has triggered our efforts in pursuing new approaches to a validated, non-rigid co-registration algorithm applicable to whole-body PET/CT imaging of which first results are presented here. This approach appears suitable for applications in retrospective WB-PET/CT alignment. Ziel Kombinierte PET/CT-Bildgebung ermöglicht verbesserte Koregistrierung von PET- und CT-Daten gegenüber separat akquirierten Bildern. Trotzdem entstehen in der klinischen Anwendung lokale Fehlregistrierungen, die zu Fehlern in der rekonstruierten PET- Tracerverteilung führen können, falls die unregistrierten CT-Daten zur Schwächungskorrektur (AC) der Emissionsdaten verwendet werden. Wir untersuchen daher die Anwendung von Bildregistrierungsalgorithmen vor der CT-basierten AC zur Verbesserung der PET-Aufnahmen. Methoden Mittels einer kommerziellen Registrierungssoftware wurden die CT-Daten eines PET/CT- Tomographen durch landmarken- und intensitätsbasierte rigide (starre) und nicht-rigide Registrierungsverfahren räumlich an die unkorrigierten PET-Emissionsdaten angepasst und zur AC verwendet. Zur Bewertung wurden die Tracerverteilungen in den PET-Bildern (vor AC, CT-AC, CT-AC nach Koregistrierung) visuell und mit Hilfe korrelierter Fadenkreuze verglichen. Zusätzlich untersuchten wir die ITK-Implementierung der bekannten B-spline basierten, nicht-rigiden Registrierungsansätze im Hinblick auf ihre Verwendbarkeit für die multimodale PET/CT-Ganzkörperregistrierung. Ergebnisse Mittels landmarkenbasierter, nicht-rigider Registrierung konnte die Tracerverteilung in den PET-Daten lokal verbessert werden. Landmarkenbasierte rigide Registrierung führte zu starker Fehlregistrierung in entfernten Körperregionen. Automatische rigide und nicht-rigide Registrierung unter Verwendung der Mutual-Information-Ähnlichkeitsmetrik versagte auf allen verwendeten Datensätzen. Die automatische Registrierung mit B-spline-Funktionen zeigte vielversprechende Resultate in der Anwendung auf einem ähnlich gelagerten CT–MR-Registrierungsproblem. Fazit Retrospektive, nicht-rigide Registrierung unkorrigierter PET- und CT-Aufnahmen aus kombinierten Aufnahmensystemen vor der AC kann die Qualität von PET-Aufnahmen im klinischen Einsatz verbessern. Trotzdem steht bis heute im klinischen Alltag keine validierte, automatische Registrierungssoftware zur Verfügung. Wir verfolgen dazu Ansätze für validierte, nicht-rigide Bildregistrierung für den klinischen Einsatz und präsentieren erste Ergebnisse. KW - PET/CT KW - combined imaging KW - image co-registration KW - attenuation KW - correction KW - Positronen-Emissions-Tomografie KW - Computertomografie KW - Bildgebendes Verfahren KW - Registrierung KW - Schwächung Y1 - 2008 U6 - https://doi.org/10.1016/j.zemedi.2007.07.004 VL - 18 IS - 1 SP - 59 EP - 66 ER - TY - INPR A1 - Weiherer, Maximilian A1 - Eigenberger, Andreas A1 - Brébant, Vanessa A1 - Prantl, Lukas A1 - Palm, Christoph T1 - Learning the shape of female breasts: an open-access 3D statistical shape model of the female breast built from 110 breast scans N2 - We present the Regensburg Breast Shape Model (RBSM) – a 3D statistical shape model of the female breast built from 110 breast scans, and the first ever publicly available. Together with the model, a fully automated, pairwise surface registration pipeline used to establish correspondence among 3D breast scans is introduced. Our method is computationally efficient and requires only four landmarks to guide the registration process. In order to weaken the strong coupling between breast and thorax, we propose to minimize the variance outside the breast region as much as possible. To achieve this goal, a novel concept called breast probability masks (BPMs) is introduced. A BPM assigns probabilities to each point of a 3D breast scan, telling how likely it is that a particular point belongs to the breast area. During registration, we use BPMs to align the template to the target as accurately as possible inside the breast region and only roughly outside. This simple yet effective strategy significantly reduces the unwanted variance outside the breast region, leading to better statistical shape models in which breast shapes are quite well decoupled from the thorax. The RBSM is thus able to produce a variety of different breast shapes as independently as possible from the shape of the thorax. Our systematic experimental evaluation reveals a generalization ability of 0.17 mm and a specificity of 2.8 mm for the RBSM. Ultimately, our model is seen as a first step towards combining physically motivated deformable models of the breast and statistical approaches in order to enable more realistic surgical outcome simulation. KW - Statistical shape mode KW - Surgical outcome simulation KW - 3D breast scan registration KW - Non-rigid surface registration KW - Breast imaging Y1 - 2021 ER - TY - JOUR A1 - Weiherer, Maximilian A1 - Eigenberger, Andreas A1 - Egger, Bernhard A1 - Brébant, Vanessa A1 - Prantl, Lukas A1 - Palm, Christoph T1 - Learning the shape of female breasts: an open-access 3D statistical shape model of the female breast built from 110 breast scans JF - The Visual Computer N2 - We present the Regensburg Breast Shape Model (RBSM)—a 3D statistical shape model of the female breast built from 110 breast scans acquired in a standing position, and the first publicly available. Together with the model, a fully automated, pairwise surface registration pipeline used to establish dense correspondence among 3D breast scans is introduced. Our method is computationally efficient and requires only four landmarks to guide the registration process. A major challenge when modeling female breasts from surface-only 3D breast scans is the non-separability of breast and thorax. In order to weaken the strong coupling between breast and surrounding areas, we propose to minimize the variance outside the breast region as much as possible. To achieve this goal, a novel concept called breast probability masks (BPMs) is introduced. A BPM assigns probabilities to each point of a 3D breast scan, telling how likely it is that a particular point belongs to the breast area. During registration, we use BPMs to align the template to the target as accurately as possible inside the breast region and only roughly outside. This simple yet effective strategy significantly reduces the unwanted variance outside the breast region, leading to better statistical shape models in which breast shapes are quite well decoupled from the thorax. The RBSM is thus able to produce a variety of different breast shapes as independently as possible from the shape of the thorax. Our systematic experimental evaluation reveals a generalization ability of 0.17 mm and a specificity of 2.8 mm. To underline the expressiveness of the proposed model, we finally demonstrate in two showcase applications how the RBSM can be used for surgical outcome simulation and the prediction of a missing breast from the remaining one. Our model is available at https://www.rbsm.re-mic.de/. KW - Statistical shape model KW - Non-rigid surface registration KW - Breast imaging KW - Surgical outcome simulation KW - Breast reconstruction surgery Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-30506 N1 - Corresponding author: Christoph Palm N1 - Zugehörige arXiv-Publikation: https://opus4.kobv.de/opus4-oth-regensburg/frontdoor/index/index/docId/2023 VL - 39 IS - 4 SP - 1597 EP - 1616 PB - Springer Nature ER - TY - CHAP A1 - Weiherer, Maximilian A1 - Zorn, Martin A1 - Wittenberg, Thomas A1 - Palm, Christoph ED - Tolxdorff, Thomas ED - Deserno, Thomas M. ED - Handels, Heinz ED - Maier, Andreas ED - Maier-Hein, Klaus H. ED - Palm, Christoph T1 - Retrospective Color Shading Correction for Endoscopic Images T2 - Bildverarbeitung für die Medizin 2020. Algorithmen - Systeme - Anwendungen. Proceedings des Workshops vom 15. bis 17. März 2020 in Berlin N2 - In this paper, we address the problem of retrospective color shading correction. An extension of the established gray-level shading correction algorithm based on signal envelope (SE) estimation to color images is developed using principal color components. Compared to the probably most general shading correction algorithm based on entropy minimization, SE estimation does not need any computationally expensive optimization and thus can be implemented more effciently. We tested our new shading correction scheme on artificial as well as real endoscopic images and observed promising results. Additionally, an indepth analysis of the stop criterion used in the SE estimation algorithm is provided leading to the conclusion that a fixed, user-defined threshold is generally not feasible. Thus, we present new ideas how to develop a non-parametric version of the SE estimation algorithm using entropy. KW - Endoskopie KW - Bildgebendes Verfahren KW - Farbenraum KW - Graustufe Y1 - 2020 SN - 978-3-658-29266-9 U6 - https://doi.org/10.1007/978-3-658-29267-6 SP - 14 EP - 19 PB - Springer Vieweg CY - Wiesbaden ER - TY - JOUR A1 - Weiler, Christoph Karl Felix A1 - Körkel, Stefan T1 - Optimum experimental design for extended Gaussian disorder modeled organic semiconductor devices JF - Journal of Applied Physics N2 - We apply optimum experimental design (OED) to organic semiconductors modeled by the extended Gaussian disorder model (EGDM) which was developed by Pasveer et al. [Phys. Rev. Lett. 94, 206601 (2005)]. We present an extended Gummel method to decouple the corresponding system of equations and use automatic differentiation to get derivatives with the required accuracy for OED. We show in two examples, whose parameters are taken from Pasveer et al. [Phys. Rev. Lett. 94, 206601 (2005)] and Mensfoort and Coehoorn [Phys. Rev. B 78, 085207 (2008)] that the linearized confidence regions of the parameters can be reduced significantly by applying OED resulting in new experiments with a different setup. Y1 - 2013 U6 - https://doi.org/10.1063/1.4794365 VL - 113 IS - 9 PB - AIP CY - Melville, NY ER - TY - THES A1 - Weiß, Luiza T1 - Wie verhält sich der Beckenboden unter Spontangeburt? BT - Ein anatomisch-histologischer Blick auf den weiblichen Beckenboden und die Pathophysiologie des Dammrisses N2 - Die hohe Rate an Geburtsverletzungen unter Spontangeburt mit teilweise gravierenden Kurz- und Langzeitfolgen stellt eine physische und psychosoziale Belastung für Gebärende dar, sodass der Wunsch nach vollständig erhaltenem Damm und erhaltener Beckenbodenmuskulatur stark vorhanden ist. Als Erhaltung der Gesundheit von Mutter und Kind stellt der Schutz des Dammes und Beckenbodens eine Kernkompetenz der Hebammen dar. Um dieser nachzukommen, wird die Pathophysiologie des Dammrisses erörtert. Nachdem der weibliche Beckenboden anatomisch und histologisch aufgearbeitet wurde sowie die Pathophysiologie der Wundentstehung, konnte unter Einbeziehung des Verhaltens des Beckenbodens unter Spontangeburt die Pathophysiologie des Dammrisses aufgezeigt werden. Diese ist ein Zusammenspiel aus Druck auf das Gewebe durch das tiefertretende Kind und zum Teil aus den wirkenden Scherkräften der stattfindenden Dehnung. Der entscheidende Mechanismus liegt jedoch beim Druck, da dieser eine Minderversorgung der Zellen verursacht, sodass es zur hypoxischen Ischämie und schließlich zum nekrotischen Zelltod kommt. Es konnte aufgezeigt werden, dass zusätzliche Anspannung einen stark negativen Faktor für Geburtsverletzungen darstellt, weshalb die genetische Disposition sowie das maternales Alter valide Risikofaktoren sind und aus welchen Gründen eine trainierte Beckenbodenmuskulatur von Vorteil sein dürfte. KW - Dammriss KW - Pathophysiologie KW - Beckenboden KW - Spontangeburt KW - Dammriss KW - Pathophysiologie KW - Beckenboden KW - Spontangeburt Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-71307 ER - TY - CHAP A1 - Weiß, Roman A1 - Großmann, Benjamin A1 - Leibold, Marion A1 - Schlegl, Thomas A1 - Wollherr, Dirk A1 - Weiss, Roman A1 - Grossmann, Benjamin T1 - Modeling and nonlinear control of antagonistically actuating pneumatic artificial muscles T2 - 2017 IEEE International Conference on Advanced Intelligent Mechatronics (AIM), 3-7 July 2017, Munich, Germany N2 - This paper discusses modeling and nonlinear control of a joint antagonistically actuated by two pneumatic, artificial muscles. A single model of the whole system is obtained by a combined physical and phenomenological modeling approach. The combined model for the joint, the muscles and the proportional valves results in a nonlinear, affine-in-control system description. The model is used to derive control laws for an input/output linearization approach to linearize the plant. Modeling and parametrization errors are covered via an outer control loop consisting of a state-feedback which is extended by an additional feedback of error integral. Extensive experimental results show the quality of the model and the performance of the respective control laws. KW - FORCE KW - Muscles KW - Pulleys KW - Robot sensing systems KW - Transfer functions KW - Valves Y1 - 2017 U6 - https://doi.org/10.1109/AIM.2017.8014001 SP - 94 EP - 99 PB - IEEE ER - TY - JOUR A1 - Wessely, Rainer A1 - Hausleiter, Jörg A1 - Michaelis, Cornelia A1 - Jaschke, Birgit A1 - Vogeser, Michael A1 - Milz, Stefan A1 - Behnisch, Boris A1 - Schratzenstaller, Thomas A1 - Renke-Gluszko, Magdalena A1 - Stöver, Michael A1 - Wintermantel, Erich A1 - Kastrati, Adnan A1 - Schömig, Albert T1 - Inhibition of neointima formation by a novel drug-eluting stent system that allows for dose-adjustable, multiple, and on-site stent coating JF - Arteriosclerosis, Thrombosis, and Vascular Biology N2 - Objective The risk of in-stent restenosis can be considerably reduced by stents eluting cytostatic compounds. We created a novel drug-eluting stent system that includes several new features in the rapidly evolving field of stent-based drug delivery. Methods and Results The aim of the present study was the preclinical evaluation of a stent-coating system permitting individual, on-site coating of stents with a unique microporous surface allowing for individualizable, dose-adjustable, and multiple coatings with identical or various compounds, designated ISAR (individualizable drug-eluting stent system to abrogate restenosis). Stents were coated with 0.75% rapamycin solution, and high-performance liquid chromatography (HPLC)-based determination of drug release profile indicated drug release for >21 days. Rapamycin-eluting microporous (REMP) stents implanted in porcine coronary arteries were safe. To determine the efficacy of REMP stents, this novel drug-eluting stent platform was compared with the standard sirolimus-eluting stent. At 30 days, in-stent neointima formation in porcine coronary arteries was similar in both groups, yielding a significant decrease of neointimal area and injury-dependent neointimal thickness compared with bare-metal stents. Conclusion The ISAR drug-eluting stent platform as a novel concept for stent coating allows for a safe, effective, on-site stent coating process, thus justifying further clinical evaluation to decrease in-stent restenosis in humans. In-stent neointima formation can be successfully attenuated by drug-eluting stents. We introduce a novel conceptual approach for stent-coating that allows for dose-adjustable, on-site stent coating process if desired with multiple compounds. Microporous stents coated with rapamycin proved safe and effective for the limitation of neointima formation in a porcine coronary stent model. KW - drug-eluting stent KW - stent platform KW - sirolimus KW - rapamycin Y1 - 2005 U6 - https://doi.org/10.1161/01.ATV.0000157579.52566.ee SN - 1524-4636 VL - 25 IS - 4 SP - 748 EP - 753 ER - TY - GEN A1 - Westner, Markus A1 - Fuhrmann, Thomas T1 - Entwicklung eines Programms für internationale Gastdozierende als Good Practice Modell für die Hochschulinternationalisierung T2 - Internationalisierung der Curricula in den MINT-Fächern (ICM 2018), Berlin N2 - Der Freistaat Bayern finanziert seit einigen Jahren ein Hochschulprogramm zur Förderung von internationalen Gastprofessorinnen und Gastprofessoren an seinen Hochschulen. Mit diesen Finanzmitteln fördert die OTH Regensburg unter anderem internationale Gastvorlesungen. In der Fakultät Informatik und Mathematik wurde seit 2015 eine Zusammenstellung internationaler Gastvorlesungen entwickelt, die als Wahlpflichtfächer systematisch in ein bestehendes Curriculum integriert sind. So werden den heimischen Studierenden internationale Erfahrungen ermöglicht ("internationalization at home"), die fachliche Breite des Curriculums wird erhöht und es können auf Basis persönlicher Kontakte internationale Hochschulpartnerschaften neu geknüpft und weiter entwickelt werden. Jede Vorlesung in diesem Programm besteht aus mehreren Teilen. Zum Vorlesungsbeginn werden die geplanten Inhalte und Anforderung den Studierenden in einer Videokonferenz erläutert. Die Studierenden erhalten Unterlagen, um sich in Selbstlerneinheiten auf die Präsenzvorlesungen des Gastes vorzubereiten. Im Präsenzteil verbringt die/der Gastdozierende ca. 2 bis 3 Wochen in Regensburg und hält an der Hochschule Blockvorlesungen. So ist es möglich, Veranstaltungen mit 5 ECTS Credits in einem "blended learning" Lehr-/Lernformat durchzuführen. Studierende schätzen das Programm sehr und äußern sich in Evaluationen äußerst positiv über die fachliche und didaktische Erweiterung des Fächerspektrums. Dieses Programm wird als "good practice" innerhalb der Hochschule angesehen und soll in anderen technischen Fakultäten verbreitet werden, u.a. wurde ein "Prozesshandbuch" mit konkreten Beispielen und Handreichungen erstellt. Der Vortrag geht auf diese und weitere Umsetzungsaspekte sowie zugehörige Herausforderungen ein. KW - Hochschule KW - Internationalisierung KW - MINT-Fächer KW - Gastdozent KW - Curriculum KW - Benchmarking Y1 - 2018 ER - TY - JOUR A1 - Westner, Markus A1 - Fuhrmann, Thomas T1 - Internationale Gastdozierende virtuell und vor Ort JF - Die Neue Hochschule Y1 - 2017 UR - https://www.hlb.de/fileadmin/hlb-global/downloads/dnh/full/2017/DNH_2017-6.pdf SP - 6 PB - hlb Hochschullehrerbund e.V. ER - TY - GEN A1 - Westner, Markus A1 - Fuhrmann, Thomas T1 - Applied Learning through Industry Collaboration BT - The Case of German Universities of Applied Sciences T2 - Applied Learning Conference, 2020, Singapur N2 - Purpose In 1969, Germany founded a new type of tertiary education institution, the so-called “Universities of Applied Sciences” (UAS). In contrast to traditional universities, UAS are supposed to educate their students based on scientific methods but with a high degree of application orientation (Wissenschaftsrat, 2010). The goal was to generate highly employable graduates. Since then the number of UAS in Germany has risen to 216 in 2018/2019 (Statistisches Bundesamt, 2019). ~45% of all German students start their tertiary education at a UAS (Autorengruppe Bildungsberichterstattung, 2018). UAS graduates are well perceived by domestic employers, enjoy high recruiting rates and attractive salary levels. The educational model has proven so successful that its approach and underlying philosophy has been replicated under terms such as “cooperative education” or “applied learning” in a vast number of different countries and educational systems around the globe (Altbach, Reisberg, & Rumbley, 2011). This talk critically describes the key aspects that constitute German UAS’ approaches to industry-oriented applied learning. The findings are relevant for academics, policy makers, and industry representatives to generate ideas on how to improve study curricula, policies, or collaboration between academia and industry. Method The approach taken consists of a descriptive and structured account of the key aspects that constitute the study curricula of a UAS from an applied learning perspective. By building on their own experiences as teaching professors and part of a German UAS’ managerial team, the research method taken resembles an action research-oriented approach. Key Findings German UAS have numerous application-oriented learning elements in their curricula. These elements are performed inside the university like lab courses but many of these learning elements are carried out in cooperation with industry. Bachelor programs span over seven semesters. Fundamentals are taught in the first two semesters and from the third semester on, more and more application-oriented lectures and labs become part of the curricula. In the fifth semester, a mandatory internship is integrated in the study program. This internship is carried out either at companies in Germany or abroad. It is the goal of the internship that the students gain first practical experience in a real work environment. The work tasks in internship should be similar to the later professional demands and should contain a project. The students themselves are responsible for finding an appropriate job and organize the administrative aspects around the internship, thus their self-organization skills are advanced. The UAS teaching staff supervises the internships from an academic perspective. This mandatory internship has numerous advantages: students experience real industry environment and they build contacts to later employers thus forming a potential pathway to future employment. Bachelor and master courses each finish with thesis work. The majority of theses is carried out in companies under university supervision. This is a second chance for the students to accomplish a company project, to gain practical experience and to get in touch with potential employers. In addition to undergraduate and postgraduate education, German UAS do a lot of applied research together with companies. This applied research can also be the basis for the work of Ph.D students. Industry representatives are also involved when designing new study programs as consultants and give advice for accreditation and reaccreditation of programs. All these activities of German universities of applied sciences lead to a high practical relevance of education programs and to a high degree of employability of UAS graduates. KW - Applied Learning KW - UAS KW - Industry collaboration Y1 - 2020 ER - TY - CHAP A1 - Westner, Markus A1 - Fuhrmann, Thomas A1 - Waas, Thomas A1 - Skelton, David T1 - Internationalization of a Computer Science Faculty BT - Lessons learned from a regional german technical university of applied sciences T2 - 9th Annual International Conference on Computer Science Education: Innovation and Technology (CSEIT 2018), 2018, Singapore N2 - The paper at hand describes how a regional university of applied sciences tried to internationalize its learning and teaching environment. It describes the challenges encountered, the managerial approach taken, illustrates the implemented initiatives, and how effective they turned out. The results might be relevant to faculty staff in managerial positions at regional universities all over the world that face the challenge to internationalize their teaching and learning environment for the benefit of their domestic students. KW - Internationalization KW - Faculty development KW - Change management KW - PDCA KW - Internationalisierung KW - Hochschule für angewandte Wissenschaften KW - Lernumwelt Y1 - 2018 U6 - https://doi.org/10.5176/2251-2195_CSEIT18.118 SP - 33 EP - 38 ER - TY - JOUR A1 - Westner, Markus A1 - Kratzer, Simon A1 - Drechsler, Andreas A1 - Strahringer, Susanne T1 - The Fractional CIO in SMEs: conceptualization and research agenda JF - Information Systems and e-Business Management N2 - We conceptualize the new phenomenon of the Fractional Chief InformationOfficer (CIO) as a part-time executive who usually works for more than one pri-marily small- to medium-sized enterprise (SME) and develop promising avenuesfor future research on Fractional CIOs. We conduct an empirical study by drawingon semi-structured interviews with 40 individuals from 10 different countries whooccupy a Fractional CIO role. We derive a definition for the Fractional CIO, dis-tinguish it from other forms of employment, and compare it with existing researchon CIO roles. Further, we find four salient engagement types of Fractional CIOsoffering value for SMEs in various situations: Strategic IT management, Restruc-turing, Rapid scaling, and Hands-on support. The results reveal similarities withexisting CIO roles as well as novel insights concerning the different engagementtypes. Lastly, we propose a research agenda for the Fractional CIO field, based onfour research themes derived from existing CIO research and insights from theinterviews. KW - Fractional CIO KW - Virtual CIO KW - IT leadership KW - Part-time management KW - SMEs KW - Small businesses KW - Interim management Y1 - 2022 U6 - https://doi.org/10.1007/s10257-022-00557-4 VL - 20 SP - 581 EP - 611 PB - Springer ER - TY - CHAP A1 - Wick, Michael A1 - Lindner, Gerhard A1 - Zimmer, Katja A1 - Schreiner, Rupert A1 - Fuhrmann, Thomas A1 - Seebauer, Gudrun A1 - Xu, Boqing A1 - Zheng, Jihong A1 - Wang, Ning ED - Liu, Xu ED - Zhang, Xi-Cheng T1 - German-Chinese cooperative Bachelor in engineering physics/optoelectronics T2 - 14th Conference on Education and Training in Optics and Photonics: ETOP 2017; Hangzhou, China 29.05.2017 - 31.05.2017 N2 - The University of Shanghai for Science and Technology (USST), the Coburg University of Applied Sciences and Arts (CUASA) and the OTH Regensburg, University of Applied Sciences (OTHR) established an English taught international cooperative bachelor program in the area of Engineering Physics/Optoelectronics. Students from China study their first four semesters at USST. They continue their studies in Germany for the last three semesters, including an internship and a bachelor thesis, graduating with a Chinese and a German bachelor degree. Students from Germany study their third and fourth semester at USST to gain international experience. While the first cohort of Chinese students is currently in Germany, the second cohort of German students is in Shanghai. Up to now the feedback regarding this study program is completely positive, thus it is planned to develop it further. Y1 - 2017 SN - 9781510613812 U6 - https://doi.org/10.1117/12.2269943 PB - SPIE ER - TY - JOUR A1 - Widbiller, Matthias A1 - Keim, Lukas A1 - Schlichting, Ralf A1 - Striegl, Birgit A1 - Hiller, Karl-Anton A1 - Jungbauer, Rebecca A1 - Buchalla, Wolfgang A1 - Galler, Kerstin M. T1 - Debris Removal by Activation of Endodontic Irrigants in Complex Root Canal Systems BT - A Standardized In-Vitro-Study JF - Applied Sciences N2 - Aim of the study was to develop a standardized model system to investigate endodontic irrigation techniques and assess the efficiency of different activation methods on the removal of hard tissue debris in complex root canal systems. Mesial roots of mandibular molars were firstly scanned by micro-computed tomography (µCT) and allocated to three groups of irrigant activation: sonic activation (EDDY, VDW, Munich, Germany), laser activation (AutoSWEEPS, FOTONA, Ljubljana, Slovenia) and conventional needle irrigation (control). Roots were fixed in individual 3D-printed holders to facilitate root canal enlargement under constant irrigation with NaOCl (5%). To enable standardized quantification of remaining debris, BaSO4-enriched dentine powder was compacted into the canals, followed by another µCT-scan. The final irrigation was performed using 17% ethylenediaminetetraacetic acid (EDTA) and 5% sodium hypochlorite (NaOCl) with the respective activation method, and the volume of remaining artificial debris was quantified after a final µCT-scan. The newly developed model system allowed for reliable, reproducible and standardized assessment of irrigation methods. Activation of the irrigant proved to be significantly more effective than conventional needle irrigation regarding the removal of debris, which persisted particularly in the apical third of the root canal in the control group. The efficiency of irrigation was significantly enhanced with laser- and sonic-based activation, especially in the apical third. Y1 - 2021 U6 - https://doi.org/10.3390/app11167331 VL - 11 IS - 16 SP - 1 EP - 14 PB - MDPI CY - Basel ER - TY - CHAP A1 - Wiesent, Lisa A1 - Geith, Markus A. A1 - Wagner, Marcus T1 - Simulation of Fluid-Structure Interaction between injection medium and balloon catheter using ICFD T2 - 11th European LS-DYNA Conference 2017, 9 - 11 May, Salzburg, Austria N2 - Arteriosclerosis is a major health issue worldwide. While it is commonly treated by the implantation of an balloon-expandable stent, micro injuries may occur during stent deployment, and induce in-stent restenosis, whose consequence can be fatal. Studying this undesirable phenomenon is usually limited as experimental data is hard to obtain on ethical ground. Numerical simulation are performed to better understand this problem. To construct a more realistic simulation of a balloon-expandable stent, a partitioned strongly-coupled FSI simulation of the balloon deployment was set up using the ICFD solver of LS-DYNA, - a quite innovative approach. The complex balloon configuration as well as the interaction of the injection medium and the balloon structure was considered. The balloon structure consisting of shell elements was obtained from preliminary balloon folding and pleating simulations. The balloon consists of a flexible thin walled polyamide. The injection fluid is implemented using volume elements. Balloon deployment was initiated by a pressure boundary condition inducing a volume flow into the balloon. The initial feasibility analysis showed promising result including a continuous balloon deployment and a reasonable development of the fluid pressure and velocity field. However, applying this FSI approach to a more complex balloon structure led to a non convergent solution. The non-convergence could be mainly reduced to mechanical factors including the low wall thickness of the balloon (< 0.05 mm) and the flexibility of the polyamide. Further, the ICFD solver shows less accuracy concerning the FSI conditions when dealing with thin flexible structures as well as enclosed volumes. A shell thickness of 0.06 mm is believed to result in a convergent solution. KW - Koronare Herzkrankheit KW - Stent KW - Ballondilatation KW - Numerische Strömungssimulation Y1 - 2017 UR - https://www.dynalook.com/conferences/11th-european-ls-dyna-conference/icfd-solver-and-fsi/simulation-of-fluid-structure-interaction-between-injection-medium-and-balloon-catheter-using-icfd SN - 978-3981621549 ER - TY - GEN A1 - Wiesent, Lisa A1 - Hupke, Constantin A1 - Balk, Christian A1 - Schultheiss, Ulrich A1 - Schratzenstaller, Thomas T1 - Optimization of the cardiovascular stent design towards improved expansion behaviour and radial stiffness properties T2 - Biomedizinische Technik N2 - - Development of a FEA Tool for a realistic stent simulation - investigation on minor modification on the stent design on the expansion behaviour - analysis of three stent designs: classical stent design with pronounced dogbone effect, two modified stent design (non-dogbone-design) KW - Kardiovaskuläres System KW - Stent Y1 - 2018 U6 - https://doi.org/10.1515/bmt-2018-6031 VL - 63 IS - s1 ER - TY - JOUR A1 - Wiesent, Lisa A1 - Schultheiss, Ulrich A1 - Schmid, Christof A1 - Schratzenstaller, Thomas A1 - Nonn, Aida T1 - Experimentally validated simulation of coronary stents considering different dogboning ratios and asymmetric stent positioning JF - PlOS One N2 - In-stent restenosis remains a major problem of arteriosclerosis treatment by stenting. Expansion-optimized stents could reduce this problem. With numerical simulations, stent designs/ expansion behaviours can be effectively analyzed. For reasons of efficiency, simplified models of balloon-expandable stents are often used, but their accuracy must be challenged due to insufficient experimental validation. In this work, a realistic stent life-cycle simulation has been performed including balloon folding, stent crimping and free expansion of the balloon-stent-system. The successful simulation and validation of two stent designs with homogenous and heterogeneous stent stiffness and an asymmetrically positioned stent on the balloon catheter confirm the universal applicability of the simulation approach. Dogboning ratio, as well as the final dimensions of the folded balloon, the crimped and expanded stent, correspond well to the experimental dimensions with only slight deviations. In contrast to the detailed stent life-cycle simulation, a displacement-controlled simulation can not predict the transient stent expansion, but is suitable to reproduce the final expanded stent shape and the associated stress states. The detailed stent life-cycle simulation is thus essential for stent expansion analysis/optimization, whereas for reasons of computational efficiency, the displacement-controlled approach can be considered in the context of pure stress analysis. KW - Catheters KW - Coronary stenting KW - Deformation KW - Stent implantation KW - Stiffness KW - Stent KW - Ballondilatation KW - Numerische Strömungssimulation Y1 - 2019 U6 - https://doi.org/10.1371/journal.pone.0224026 VL - 14 IS - 10 SP - 1 EP - 25 PB - PLOS ER - TY - JOUR A1 - Wiesent, Lisa A1 - Schultheiß, Ulrich A1 - Lulla, Philipp A1 - Noster, Ulf A1 - Schratzenstaller, Thomas A1 - Schmid, Christof A1 - Nonn, Aida A1 - Spear, Ashley T1 - Computational analysis of the effects of geometric irregularities and post-processing steps on the mechanical behavior of additively manufactured 316L stainless steel stents JF - PLoS ONE N2 - Advances in additive manufacturing enable the production of tailored lattice structures and thus, in principle, coronary stents. This study investigates the effects of process-related irregularities, heat and surface treatment on the morphology, mechanical response, and expansion behavior of 316L stainless steel stents produced by laser powder bed fusion and provides a methodological approach for their numerical evaluation. A combined experimental and computational framework is used, based on both actual and computationally reconstructed laser powder bed fused stents. Process-related morphological deviations between the as-designed and actual laser powder bed fused stents were observed, resulting in a diameter increase by a factor of 2-2.6 for the stents without surface treatment and 1.3-2 for the electropolished stent compared to the as-designed stent. Thus, due to the increased geometrically induced stiffness, the laser powder bed fused stents in the as-built (7.11 ± 0.63 N) or the heat treated condition (5.87 ± 0.49 N) showed increased radial forces when compressed between two plates. After electropolishing, the heat treated stents exhibited radial forces (2.38 ± 0.23 N) comparable to conventional metallic stents. The laser powder bed fused stents were further affected by the size effect, resulting in a reduced yield strength by 41% in the as-built and by 59% in the heat treated condition compared to the bulk material obtained from tensile tests. The presented numerical approach was successful in predicting the macroscopic mechanical response of the stents under compression. During deformation, increased stiffness and local stress concentration were observed within the laser powder bed fused stents. Subsequent numerical expansion analysis of the derived stent models within a previously verified numerical model of stent expansion showed that electropolished and heat treated laser powder bed fused stents can exhibit comparable expansion behavior to conventional stents. The findings from this work motivate future experimental/numerical studies to quantify threshold values of critical geometric irregularities, which could be used to establish design guidelines for laser powder bed fused stents/lattice structures. KW - Heat treatment KW - Lasers KW - Surface treatments KW - Specimen preparation and treatment KW - Material properties KW - Stiffness KW - Deformation KW - Powders KW - Koronarendoprothese KW - Rapid prototyping KW - Numerische Methode Y1 - 2020 U6 - https://doi.org/10.1371/journal.pone.0244463 N1 - Corresponding author: Lisa Wiesent VL - 15 IS - 12 SP - 1 EP - 30 PB - PLOS ER - TY - JOUR A1 - Wiesent, Lisa A1 - Spear, Ashley A1 - Nonn, Aida T1 - Computational analysis of the effects of geometric irregularities on the interaction of an additively manufactured 316L stainless steel stent and a coronary artery JF - Journal of the Mechanical Behavior of Biomedical Materials N2 - Customized additively manufactured (laser powder bed fused (L-PBF)) stents could improve the treatment of complex lesions by enhancing stent-artery conformity. However, geometric irregularities inherent for L-PBF stents are expected to influence not only their mechanical behavior but also their interaction with the artery. In this study, the influence of geometrical irregularities on stent-artery interaction is evaluated within a numerical framework. Thus, computed arterial stresses induced by a reconstructed L-PBF stent model are compared to those induced by the intended stent model (also representing a stent geometry obtained from conventional manufacturing processes) and a modified CAD stent model that accounts for the increased strut thickness inherent for L-PBF stents. It was found that, similar to conventionally manufactured stents, arterial stresses are initially related to the basic stent design/topology, with the highest stresses occurring at the indentations of the stent struts. Compared to the stent CAD model, the L-PBF stent induces distinctly higher and more maximum volume stresses within the plaque and the arterial wall. In return, the modified CAD model overestimates the arterial stresses induced by the L-PBF stent due to its homogeneously increased strut thickness and thus its homogeneously increased geometric stiffness compared with the L-PBF stent. Therefore, the L-PBF-induced geometric irregularities must be explicitly considered when evaluating the L-PBF stent-induced stresses because the intended stent CAD model underestimates the arterial stresses, whereas the modified CAD model overestimates them. The arterial stresses induced by the L-PBF stent were still within the range of values reported for conventional stents in literature, suggesting that the use of L-PBF stents is conceivable in principle. However, because geometric irregularities, such as protruding features from the stent surface, could potentially damage the artery or lead to premature stent failure, further improvement of L-PBF stents is essential. KW - Laser powder bed fusion (L-PBF) KW - Cardiovascular stents KW - Finite element analysis (FEA) KW - Geometrical imperfections KW - Stent-artery interaction Y1 - 2022 U6 - https://doi.org/10.1016/j.jmbbm.2021.104878 SN - 1751-6161 VL - 125 PB - Elsevier ER - TY - CHAP A1 - Will, Anna A1 - Raptis, Georgios ED - Weber, Karsten ED - Haug, Sonja ED - Lauer, Norina ED - Meussling-Sentpali, Annette ED - Mohr, Christa T1 - Erfolgsfaktoren und Hemmnisse für die Akzeptanz von Ambient Assisted Living BT - Ein systematisches Literatur-Review T2 - Digitale Technik für ambulante Pflege und Therapie: Herausforderungen, Lösungen, Anwendungen und Forschungsperspektiven Y1 - 2022 SN - 978-3-8376-6235-1 U6 - https://doi.org/10.14361/9783839462355-012 VL - 1 SP - 245 EP - 286 PB - transcript CY - Bielefeld ER - TY - GEN A1 - Wilson, Edith E. A1 - Braun, Carina N. T1 - Neue empirische Erkenntnisse zu Karrierewegen in eine HAW-Professur T2 - Das Zusammenspiel von Hochschulforschung und Hochschulentwicklung: Empirie, Transfer und Wirkungen, 18. Jahrestagung der Gesellschaft für Hochschulforschung, 11.-13. September 2023, CHE Centrum für Hochschulentwicklung und Hochschule Osnabrück N2 - Der Weg in eine Professur an einer Hochschule für angewandte Wissenschaften (HAW) setzt eine „Dreifachqualifikation“ in Lehre, Forschung und Berufserfahrung voraus. Dieser hohe Anforderungsstandard limitiert aber nicht nur den Pool geeigneter Bewerber:innen (In der Smitten et al., 2017). Diese Personen sind auch bei Wirtschaftsbetrieben, Universitäten und anderen Organisationen begehrt, so dass sich der „Kampf“ um Talente mit Potenzial für eine HAW-Professur in Zukunft eher verschärft. Wissen um die Karrierewege, förderliche sowie hinderliche Aspekte in HAW-Professuren, können Hochschulen dabei helfen, geeignete Personen auf das Berufsbild aufmerksam zu machen und das Arbeitgebermarketing gegenüber potenziellen Bewerber:innen zu verbessern. Der Vortrag präsentiert erste Ergebnisse zu den Karrierewegen in eine HAW-Professur und fasst hierfür Erkenntnisse aus einer qualitativen Studie sowie Überlegungen zu deren quantitativen Überprüfung zusammen. Semi-strukturierte Interviews mit Professor:innen, welche einen Ruf an einer HAW in Bayern angenommen hatten, konnten u. a. verschiedene Karrierewege in eine Professur aufzeigen, ebenso wie die Motive, sich für dieses Berufsbild zu entscheiden. Des Weiteren wurden mögliche unterstützenden Faktoren und Hindernisse, welche den Weg in eine HAW-Professur erleichtern oder erschweren können, identifiziert. Zum Abschluss wird ein Ausblick auf eine geplante quantitativen Online-Befragung von HAW-Professor:innen gegeben, um die qualitativen Erkenntnisse zu validieren. Die Ergebnisse werden unter Bezugnahme auf die relevante Hochschulforschung (z. B. Armutat, 2022; Braun & Wilson, 2023; In der Smitten et al., 2017) ebenso wie relevante Karrieretheorien (z. B. Lent et al., 1994) diskutiert. Die abschließenden Handlungsempfehlungen für die Hochschulentwicklung sowie das Hochschulmarketing sind von praktischer Relevanz. Diese Forschung wird mit Mitteln des Bundesministeriums für Bildung und Forschung und des Landes Bayern als Teil des Projekts Zukunft akademisches Personal der OTH Regensburg (ZAP.OTHR) unter dem Programm „FH-Personal“ gefördert. KW - Hochschulen für angewandte Wissenschaften, HAW, FH, Professur, Karrierewege Y1 - 2023 ER - TY - JOUR A1 - Winkler, Fabian A1 - Westner, Markus T1 - A Systematic Literature Review of DevOps Success Factors and Adoption Models JF - SOICT '23: Proceedings of the 12th International Symposium on Information and Communication Technology. Ho Chi Minh City, Vietnam, 7-8 December 2023 N2 - This paper investigates DevOps adoption, emphasizing its cultural dimensions in the context of the information systems domain. Utilizing a robust systematic literature review methodology, we discerned nine salient success factors and delineated three stage models instrumental for a smooth transition into DevOps-centric projects. Despite the increasing breadth of research in the DevOps area, the absence of a consolidated definition remains a challenge, underscoring the importance of a unified interpretative framework. This research notably extends the current body of knowledge by focusing on the cultural dynamics of DevOps adoption. As a result, it offers a refined lens through which both practitioners involved in the adoption process and academic researchers can comprehend the nuances and implications of cultural shifts in the evolving landscape of DevOps within information systems. Y1 - 2023 SN - 979-8-4007-0891-6 U6 - https://doi.org/10.1145/3628797.3628883 SP - 525 EP - 532 PB - ACM ER - TY - JOUR A1 - Winkler, Klaudia T1 - Frauenspezifische Behandlung bei substanzbezogenen Störungen: Ergebnisse und Indikation JF - Sucht N2 - Fragestellung: Überblick über Indi-kation und Ergebnisse frauenspezifischer Beratungs- und Behandlungsangebote im Suchtbereich. Methode: Computergestützte Literaturrecherche. Ergebnisse: FrauenspezifischeAngebote erreichen vermehrt Frauen,die in herkömmlichen Einrichtungenseltener anzutreffen sind. Die erzielten Ergebnisse sind mindestens so gut wie bei traditionellen Angeboten. Als besonders günstig haben sich möglichst vielfältige Hilfsangebote erwiesen, die sich an den Problemlagen der Frauen orientieren. Wenig erfolgversprechend dagegen erscheint, lediglich Frauen gemeinsam mit anderen Frauen zu behandeln. Schlussfolgerungen: Die Evaluation und Dokumentation frauenspezifischer Angebote in Deutschland muss vorangebracht werden. T2 - Female-specific treatment for substance-related disorders: Results and indications KW - Substanzabhängigkeit KW - frauenspezifisch KW - Therapieergebnisse KW - Indikation Y1 - 2004 U6 - https://doi.org/10.1024/suc.2004.50.2.121 SN - 1664-2856 VL - 50 IS - 2 SP - 121 EP - 127 PB - Hogrefe CY - Bern ER - TY - JOUR A1 - Winkler, Klaudia T1 - Behandlungsangebote für substanzabhängige mütter kleiner kinder: Bindungstheoretische überlegungen JF - Sucht N2 - Substanzabhängigkeit der Mütter stellt für ihre Kinder sowohl wegen des Substanzkonsums, als auch wegen zahlreicher psychosozialer Belastungen, denen diese Mutter-Kind-Dyaden zusätzlich ausgesetzt sind, ein erhebliches Entwicklungsrisiko dar. Die Entwicklung einer positiven Mutter-Kind-Beziehung, die als wichtiger Schutzfaktor für die Entwicklung des Kindes gilt, ist gefährdet. Basierend auf den Annahmen der Bindungstheorie werden Möglichkeiten zur Gestaltung eziehungsorientierter Behandlungsangebote, die vor allem die Steigerung der mütterlichen Feinfühligkeit zum Ziel haben, dargestellt. Ergebnisse: Bindungsorientierte Angebote für substanzabhängige Mütter und ihre Kinder können Angebote der stationären und ambulanten Sucht- und Drogenhilfe sinnvoll ergänzen. T2 - Treatment options for substance-dependent mothers with small children: Attachment-theory considerations Y1 - 2007 U6 - https://doi.org/10.1024/2007.01.04 SN - 1664-2856 VL - 53 IS - 1 SP - 23 EP - 31 PB - Hogrefe CY - Bern ER - TY - JOUR A1 - Winkler, Klaudia T1 - Alkoholabhangige Frauen als Minderheit in Fachkliniken JF - Wiener Zeitschrift für Suchtforschung N2 - Alkoholabhängige Frauen nehmen im Bereich der Alkoholismusbehandlung in mehrfacher Hinsicht den Status einer Minderheit ein. Zum einen sind sie in Einrichtungen, in denen stationäre Behandlung angeboten wird, in Relation zu ihrem Anteil an der Gesamtzahl der alkoholabhängigen seltener anzutreffen als Manner; desweiteren sind sie in den Kliniken, in denen sie gemeinsam mit Männern behandelt werden, deutlich in der Minderheit und schließlich werden Themen, die sie betreffen im Rahmen der Behandlung seltener berücksichtigt. Es werden mögliche Erklärungen dafür gesucht, weshalb Frauen Fachkliniken seltener in Anspruch nehmen als Männer. Au ßerdem werden Folgen der Minderheitssituation der Frauen für die Kliniken als Institutionen und die Interaktion zwischen Patientinnen und Patienten aufgezeigt. T2 - Alcohol dependent women as a minority group in specialized clinics Y1 - 1996 UR - http://sfu-oc.sfu.ac.at/index.php/s/WC5FBhnAJcthLWT#pdfviewer SN - 1012-9375 VL - 19 IS - 3-4 SP - 55 EP - 62 PB - Anton Proksch-Inst. ; Ludwig Boltzmann-Inst. für Suchtforschung CY - Wien ER - TY - JOUR A1 - Winkler, Klaudia T1 - Der Frauenorientierungsindex - ein Instrument zur Beurteilung des Ausmaßes der frauenspezifischen Orientierung von Behandlungsangeboten im Suchtbereich JF - Wiener Zeitschrift für Suchtforschung N2 - Die Notwendigkeit geschlechtsspezifische Aspekte auch bei der Gestaltung der stationären Behandlungsangebote im Suchtbereich zu berücksichtigen, gewinnt zunehmend an Akzeptanz. Bisher fehlen jedoch Daten dazu, inwieweit dieser Anspruch im Rahmen der stationären Behandlungsangebote für Frauen bereits umgesetzt wird. Die vorliegende Untersuchung hatte daher zum Ziel aufzuzeigen, wie sehr sich die Behandlungsangebote in Alkoholfachkliniken an den Bedürfnissen alkoholabhängiger Frauen orientieren. Dazu wurde, basierend auf den in der Literatur formulierten Forderungen, die an die Gestaltung der Behandlungsangebote für alkoholabhängige Frauen gestellt wurden, ein Index gebildet, der das Ausmaß der Frauenorientierung der Behandlungsangebote in den Kliniken beschreibt. Die Verwendung des Index erlaubt den direkten Vergleich der verschiedenen Kliniken. In die Untersuchung gingen Daten aus 27 zufällig ausgewählten Fachkliniken ein. Die Kliniken unterscheiden sich deutlich hinsichtlich des Ausmaßes der Frauenorientierung der Behandlungs- angebote. T2 - The female orientation index - An instrument to assess the extent of treatment modalities for female addicts Y1 - 1999 UR - http://sfu-oc.sfu.ac.at/index.php/s/WC5FBhnAJcthLWT#pdfviewer SN - 1012-9375 VL - 22 IS - 1 SP - 3 EP - 9 PB - Anton Proksch-Inst. ; Ludwig Boltzmann-Inst. für Suchtforschung CY - Wien ER - TY - JOUR A1 - Winkler, Klaudia T1 - Die gemeinsame Behandlung von alkoholabhangigen Müttern mit ihren Kindern in Fachkliniken JF - Sucht T2 - In-patient treatment for alcoholic mothers and their children Y1 - 1998 SN - 1664-2856 VL - 44 IS - 3 SP - 200 EP - 206 PB - Hogrefe CY - Bern ER - TY - GEN A1 - Wolter, Jennifer A1 - Raptis, Georgios A1 - Middel, Luise A1 - Ritthaler, Markus A1 - Loss, J. A1 - Ludwig, Bernd T1 - Requirements for Apps Providing Teleconsultation Services Between Nursing Homes, Home-Based Nursing Care, and Doctors T2 - 2021 IEEE EMBS International Conference on Biomedical and Health Informatics (BHI), 27-30 July 2021, virtual conference Y1 - 2021 N1 - extended abstract & Vortrag PB - IEEE ER - TY - JOUR A1 - Wong, Christian A1 - Rasmussen, John A1 - Simonsen, Erik B. A1 - Hansen, Lone A1 - de Zee, Mark A1 - Dendorfer, Sebastian T1 - The Influence of Muscle Forces on the Stress Distribution in the Lumbar Spine JF - The Open Spine Journal N2 - Introduction: Previous studies of bone stresses in the human lumbar spine have relied on simplified models when modeling the spinal musculature, even though muscle forces are likely major contributors to the stresses in the vertebral bones. Detailed musculoskeletal spine models have recently become available and show good correlation with experimental findings. A combined inverse dynamics and finite element analysis study was conducted in the lumbar spine to investigate the effects of muscle forces on a detailed musculoskeletal finite element model of the 4th lumbar vertebral body. Materials and Methodology: The muscle forces were computed with a detailed and validated inverse dynamics musculoskeletal spine model in a lifting situation, and were then applied to an orthotropic finite element model of the 4th lumbar vertebra. The results were compared with those from a simplified load case without muscles. Results: In general the von Mises stress was larger by 30%, and even higher when looking at the von Mises stress distribution in the superio-anterior and central part of the vertebral body and in the pedicles. Conclusion: The application of spine muscles to a finite element model showed markedly larger von Mises stress responses in the central and anterior part of the vertebral body, which can be tolerated in the young and healthy spine, but it would increase the risk of compression fractures in the elderly, osteoporotic spine. KW - Lumbar spine KW - Muscle influence KW - Inverse dynamics KW - Finite element analysis KW - Lendenwirbelsäule KW - Muskelkraft KW - Belastung KW - Finite-Elemente-Methode Y1 - 2011 U6 - https://doi.org/10.2174/1876532701103010021 VL - 3 IS - 1 SP - 21 EP - 26 ER - TY - CHAP A1 - Wöhl, Rebecca A1 - Huber, Michaela A1 - Loibl, Markus A1 - Riebschläger, Birgit A1 - Nerlich, Michael A1 - Palm, Christoph T1 - The Impact of Semi-Automated Segmentation and 3D Analysis on Testing New Osteosynthesis Material T2 - Bildverarbeitung für die Medizin 2017; Algorithmen - Systeme - Anwendungen; Proceedings des Workshops vom 12. bis 14. März 2017 in Heidelberg N2 - A new protocol for testing osteosynthesis material postoperatively combining semi-automated segmentation and 3D analysis of surface meshes is proposed. By various steps of transformation and measuring, objective data can be collected. In this study the specifications of a locking plate used for mediocarpal arthrodesis of the wrist were examined. The results show, that union of the lunate, triquetrum, hamate and capitate was achieved and that the plate is comparable to coexisting arthrodesis systems. Additionally, it was shown, that the complications detected correlate to the clinical outcome. In synopsis, this protocol is considered beneficial and should be taken into account in further studies. KW - Osteosynthese KW - Implantatwerkstoff KW - Materialprüfung KW - Bildsegmentierung KW - Dreidimensionale Bildverarbeitung Y1 - 2017 U6 - https://doi.org/10.1007/978-3-662-54345-0_30 SP - 122 EP - 127 PB - Springer CY - Berlin ER - TY - JOUR A1 - Wöhl, Rebecca A1 - Maier, Johannes A1 - Gehmert, Sebastian A1 - Palm, Christoph A1 - Riebschläger, Birgit A1 - Nerlich, Michael A1 - Huber, Michaela T1 - 3D Analysis of Osteosyntheses Material using semi-automated CT Segmentation BT - a case series of a 4 corner fusion plate JF - BMC Musculoskeletal Disorders N2 - Backround Scaphoidectomy and midcarpal fusion can be performed using traditional fixation methods like K-wires, staples, screws or different dorsal (non)locking arthrodesis systems. The aim of this study is to test the Aptus four corner locking plate and to compare the clinical findings to the data revealed by CT scans and semi-automated segmentation. Methods: This is a retrospective review of eleven patients suffering from scapholunate advanced collapse (SLAC) or scaphoid non-union advanced collapse (SNAC) wrist, who received a four corner fusion between August 2011 and July 2014. The clinical evaluation consisted of measuring the range of motion (ROM), strength and pain on a visual analogue scale (VAS). Additionally, the Disabilities of the Arm, Shoulder and Hand (QuickDASH) and the Mayo Wrist Score were assessed. A computerized tomography (CT) of the wrist was obtained six weeks postoperatively. After semi-automated segmentation of the CT scans, the models were post processed and surveyed. Results During the six-month follow-up mean range of motion (ROM) of the operated wrist was 60°, consisting of 30° extension and 30° flexion. While pain levels decreased significantly, 54% of grip strength and 89% of pinch strength were preserved compared to the contralateral healthy wrist. Union could be detected in all CT scans of the wrist. While X-ray pictures obtained postoperatively revealed no pathology, two user related technical complications were found through the 3D analysis, which correlated to the clinical outcome. Conclusion Due to semi-automated segmentation and 3D analysis it has been proved that the plate design can keep up to the manufacturers’ promises. Over all, this case series confirmed that the plate can compete with the coexisting techniques concerning clinical outcome, union and complication rate. KW - Handchirurgie KW - Osteosynthese KW - Arthrodese KW - 4FC KW - SLAC wrist KW - SNAC wrist KW - Semi-automated segmentation KW - 3D analysis KW - Computertomographie KW - Bildsegmentierung KW - Dreidimensionale Bildverarbeitung Y1 - 2018 U6 - https://doi.org/10.1186/s12891-018-1975-0 VL - 19 SP - 1 EP - 8 PB - Springer Nature ER - TY - CHAP A1 - Wöhler, Claudia A1 - Colanna, Melina ED - Weber, Karsten ED - Haug, Sonja ED - Lauer, Norina ED - Mohr, Christa ED - Pfingsten, Andrea ED - Raptis, Georgios ED - Bahr, Gudrun T1 - Digitalisierung als Schlüsselfaktor für eine hochwertige Gesundheitsversorgung?! Die Perspektive einer großen Krankenversicherung BT - Die Perspektive einer großen Krankenversicherung T2 - Digitale Technik für ambulante Pflege und Therapie II - Impulse für die Praxis T3 - Regensburger Beiträge zur Digitalisierung des Gesundheitswesens - 3 Y1 - 2023 U6 - https://doi.org/10.14361/9783839467275-015 SP - 171 EP - 182 PB - transcript CY - Bielefeld ER - TY - JOUR A1 - Wünsche, Isabel A1 - Brinkmann, Melanie A1 - Gundlach, U. A1 - Pfingsten, Andrea A1 - Borgetto, Bernhard T1 - Selbsthilfe von Menschen mit Alkoholabhängigkeit JF - internistische praxis N2 - Die Gesundheitsversorgung kommt ohne die Eigenverantwortung, Selbsthilfe und aktive Mitarbeit der Patient(inn)en nicht aus. Welche Mechanismen in Selbsthilfegruppen wirken, wurde bisher nicht im Einzelnen wissenschaftlich untersucht. Im Zusammenhang mit dem gesicherten Wissen über die salutogenen und tertiärpräventiven Wirkungsweisen von Kommunikation und sozialen Bindungen kann aus dem Stand der Selbsthilfeforschung jedoch ein allgemeines heuristisches Modell der Wirkung von Selbsthilfegruppen abgeleitet werden, welches kurz erläutert wird. Alkoholbezogene Krankheiten haben in Deutschland eine besondere sozioökonomische Bedeutung. Menschen mit Alkoholabhängigkeit werden mithilfe multimodaler Therapiekonzepte (ambulante, teilstationäre oder stationäre Interventionen) und vor allem durch die vielfältigen Angebote der Suchtselbsthilfe unterstützt. Vor allem Selbsthilfegruppen tragen zur gegenseitigen sozialen Unterstützung, zur Informationsaneignung und zu Einstellungsänderungen bei den Betroffenen und in deren sozialem Umfeld bei. Sie entlasten die primären Netzwerke der Betroffenen und unterstützen bei der gezielteren Inanspruchnahme professioneller Dienste. Sind die Ergebnisse und Schlussfolgerungen der Studien zur Wirksamkeit von Selbsthilfe bei Alkoholabhängigkeit aufgrund methodischer Schwierigkeiten der Wirkungsforschung auch limitiert, so sind sich doch die meisten Forscher einig, dass die Unterstützung durch Selbsthilfegruppen allein und in Kombination mit einer professionellen Versorgung das Erreichen und Erhalten der Alkoholabstinenz unterstützt. Selbsthilfeaktivitäten werden zunehmend durch das Sozialversicherungssystem gefördert und in das Versorgungssystem integriert. Das Ungleichgewicht in der Kooperation zwischen Selbsthilfe und professionellem System kann durch ein Kennenlernen der regionalen Selbsthilfelandschaft mit ihren Strukturen, Unterstützungsleistungen und Besonderheiten ausgeglichen werden. Dieser Beitrag verringert durch die wissenschaftlich fundierte Darstellung der (Sucht-)Selbsthilfe mögliche Handlungsunsicherheiten im Umgang mit Selbsthilfegruppen in der täglichen Praxis. T2 - Self-help of people with alcohol dependence KW - Selbsthilfe KW - Alkoholabhängigkeit KW - Wirkmechanismen KW - Kooperation Y1 - 2015 VL - 55 IS - 2 SP - 349 EP - 359 ER - TY - JOUR A1 - Wünsche, Isabel A1 - Brinkmann, Melanie A1 - Gundlach, U. A1 - Pfingsten, Andrea A1 - Borgetto, Bernhard T1 - Selbsthilfe von Menschen mit Alkoholabhängigkeit JF - Tägliche Praxis N2 - Die Gesundheitsversorgung kommt ohne die Eigenverantwortung, Selbsthilfe und aktive Mitarbeit der Patient(inn)en nicht aus. Welche Mechanismen in Selbsthilfegruppen wirken, wurde bisher nicht im Einzelnen wissenschaftlich untersucht. Im Zusammenhang mit dem gesicherten Wissen über die salutogenen und tertiärpräventiven Wirkungsweisen von Kommunikation und sozialen Bindungen kann aus dem Stand der Selbsthilfeforschung jedoch ein allgemeines heuristisches Modell der Wirkung von Selbsthilfegruppen abgeleitet werden, welches kurz erläutert wird. Alkoholbezogene Krankheiten haben in Deutschland eine besondere sozioökonomische Bedeutung. Menschen mit Alkoholabhängigkeit werden mithilfe multimodaler Therapiekonzepte (ambulante, teilstationäre oder stationäre Interventionen) und vor allem durch die vielfältigen Angebote der Suchtselbsthilfe unterstützt. Vor allem Selbsthilfegruppen tragen zur gegenseitigen sozialen Unterstützung, zur Informationsaneignung und zu Einstellungsänderungen bei den Betroffenen und in deren sozialem Umfeld bei. Sie entlasten die primären Netzwerke der Betroffenen und unterstützen bei der gezielteren Inanspruchnahme professioneller Dienste. Sind die Ergebnisse und Schlussfolgerungen der Studien zur Wirksamkeit von Selbsthilfe bei Alkoholabhängigkeit aufgrund methodischer Schwierigkeiten der Wirkungsforschung auch limitiert, so sind sich doch die meisten Forscher einig, dass die Unterstützung durch Selbsthilfegruppen allein und in Kombination mit einer professionellen Versorgung das Erreichen und Erhalten der Alkoholabstinenz unterstützt. Selbsthilfeaktivitäten werden zunehmend durch das Sozialversicherungssystem gefördert und in das Versorgungssystem integriert. Das Ungleichgewicht in der Kooperation zwischen Selbsthilfe und professionellem System kann durch ein Kennenlernen der regionalen Selbsthilfelandschaft mit ihren Strukturen, Unterstützungsleistungen und Besonderheiten ausgeglichen werden. Dieser Beitrag verringert durch die wissenschaftlich fundierte Darstellung der (Sucht-)Selbsthilfe mögliche Handlungsunsicherheiten im Umgang mit Selbsthilfegruppen in der täglichen Praxis. T2 - Self-help of people with alcohol dependence KW - Selbsthilfe KW - Alkoholabhängigkeit KW - Wirkmechanismen KW - Kooperation Y1 - 2015 VL - 56 IS - 3 SP - 587 EP - 597 ER - TY - JOUR A1 - Wünsche, Isabel A1 - Brinkmann, Melanie A1 - Pfingsten, Andrea A1 - Borgetto, Bernhard T1 - Selbsthilfe von Menschen mit einer rheumatischen Erkrankung JF - internistische praxis N2 - Durch die wissenschaftlich fundierte Darstellung der Selbsthilfe (SH) bei rheumatischen Erkrankungen sollen mögliche Handlungsunsicherheiten im Umgang mit Selbsthilfegruppen (SHG) in der täglichen Praxis verringert werden. Welche Mechanismen in SHG wirken, wurde bisher nicht ausreichend wissenschaftlich untersucht. Im Zusammenhang mit dem gesicherten Wissen über die salutogenen und tertiärpräventiven Wirkungsweisen von Kommunikation und sozialen Bindungen, kann aus dem Stand der Selbsthilfeforschung jedoch ein allgemeines heuristisches Modell der Wirkung von SHG abgeleitet werden, welches kurz erläutert wird. Von der Weltgesundheitsorganisation werden rheumatische Erkrankungen als mehr oder weniger klar definierte Erkrankungen der Gelenke, gelenkumgebenden Strukturen und Muskel- oder Bindegewebe beschrieben, die zu schmerzhaften, häufig chronischen Einschränkungen des Bewegungsapparates führen können. Neben der fachärztlichen Versorgung besteht durch die Deutsche Rheuma-Liga (DRL) ein flächendeckendes SH-Angebot für Betroffene. Insbesondere SHG tragen zur gegenseitigen sozialen Unterstützung und zur Informationsaneignung bei den Betroffenen und in deren sozialen Umfeld bei. Sind die Ergebnisse und Schlussfolgerungen der Studien zu den Wirkungen von SH bei rheumatischen Erkrankungen aufgrund methodischer Schwierigkeiten der Wirkungsforschung auch limitiert, heben doch die meisten Forscher hervor, dass die Unterstützung durch SHG allein und in Kombination mit einer professionellen Versorgung neben vielen Einzelaspekten auch die Lebensqualität erhöht. KW - akuter Gelenkrheumatismus KW - Rheumatismus KW - Selbsthilfe KW - Muskelrheumatismus KW - rheumatische Erkrankungen KW - Rheumatismus KW - Selbsthilfe KW - Wirkmechanismen Y1 - 2019 SN - 0009–4846 VL - 61 IS - 1 SP - 56 EP - 67 PB - Mediengruppe Oberfranken - Fachverlage ER - TY - JOUR A1 - Wünsche, Isabel A1 - Brinkmann, Melanie A1 - Rüter, U. A1 - Gundlach, U. A1 - Pfingsten, Andrea A1 - Borgetto, Bernhard T1 - Selbsthilfe von Frauen mit einer Brustkrebserkrankung in Deutschland JF - Gynäkologische Praxis N2 - Dieser Artikel soll durch die wissenschaftlich fundierte Darstellung der (Brustkrebs)-Selbsthilfe mögliche Handlungsunsicherheiten im Umgang mit Selbsthilfegruppen (SHG) in der täglichen Praxis verringern. Die Gesundheitsversorgung kommt ohne die Eigenverantwortung, Selbsthilfe und aktive Mitarbeit der Patienten(inn)en nicht aus. Welche Mechanismen in SHG wirken, wurde bisher nicht im Einzelnen wissenschaftlich untersucht. Im Zusammenhang mit dem gesicherten Wissen über die salutogenen und tertiärpräventiven Wirkungsweisen von Kommunikation und sozialen Bindungen, kann aus dem Stand der Selbsthilfeforschung jedoch ein allgemeines heuristisches Modell der Wirkung von SHG abgeleitet werden, welches kurz erläutert wird. Die am häufigsten auftretende Krebserkrankung in Deutschland ist Brustkrebs. Davon sind zu 99 % Frauen betroffen. Frauen mit Brustkrebs werden im professionellen Versorgungssystem und insbesondere durch die vielfältigen Angebote der Selbsthilfe unterstützt. Insbesondere SHG tragen zur gegenseitigen sozialen Unterstützung und zur Informationsaneignung bei den Betroffenen und in deren sozialen Umfeld bei. Sie entlasten die primären Netzwerke der Betroffenen und unterstützen eine gezielte Inanspruchnahme professioneller Dienste. Sind die Ergebnisse und Schlussfolgerungen der Studien zur Wirksamkeit von Selbsthilfe bei Brustkrebs aufgrund methodischer Schwierigkeiten der Wirksamkeitsforschung auch limitiert, heben doch die meisten Forscher hervor, dass die Unterstützung durch SHG allein und in Kombination mit einer professionellen Versorgung psychische Störungen reduzieren und subjektiv Gesundheit und Lebensqualität erhöhen. Selbsthilfeaktivitäten werden zunehmend durch das Sozialversicherungssystem gefördert und in das Versorgungssystem integriert. Die Kooperation zwischen Selbsthilfe und professionellem System kann durch das Kennenlernen der regionalen Selbsthilfelandschaft mit ihren Strukturen, Unterstützungsleistungen und Besonderheiten verbessert werden. T2 - Self-help of women with breast cancer in Germany KW - Selbsthilfe KW - Brustkrebs bei Frauen KW - Wirkmechanismen KW - Kooperation Y1 - 2016 SN - 0341–8677 VL - 41 IS - 1 SP - 105 EP - 114 PB - mgo fachverlage ER - TY - JOUR A1 - Yaghmaei, Emad A1 - van de Poel, Ibo A1 - Christen, Markus A1 - Gordijn, Bert A1 - Kleine, Nadine A1 - Loi, Michele A1 - Morgan, Gwenyth A1 - Weber, Karsten T1 - Canvas White Paper 1 Cybersecurity and Ethics JF - SSRN Electronic Journal N2 - This White Paper outlines how the ethical discourse on cybersecurity has developed in the scientific literature, which ethical issues gained interest, which value conflicts are discussed, and where the “blind spots” in the current ethical discourse on cybersecurity are located. The White Paper is based on an extensive literature with a focus on three reference domains with unique types of value conflicts: health, business/finance and national security. For each domain, a systematic literature search has been performed and the identified papers have been analysed using qualitative and quantitative methods. An important observation is that the ethics of cybersecurity not an established subject. In all domains, cybersecurity is recognized as being an instrumental value, not an end in itself, which opens up the possibility of trade-offs with different values in different spheres. The most prominent common theme is the existence of trade-offs and even conflicts between reasonable goals, for example between usability and security, accessibility and security, privacy and convenience. Other prominent common themes are the importance of cybersecurity to sustain trust (in institutions), and the harmful effect of any loss of control over data. Y1 - 2017 U6 - https://doi.org/10.2139/ssrn.3091909 VL - 18 IS - 4 PB - SSRN ER - TY - CHAP A1 - Zacher, Johannes ED - Weber, Karsten ED - Haug, Sonja ED - Lauer, Norina ED - Mohr, Christa ED - Pfingsten, Andrea ED - Raptis, Georgios ED - Bahr, Gudrun T1 - Pflege Digital: Neue Prozesse – neue Strukturen –neue Finanzierung T2 - Digitale Technik für ambulante Pflege und Therapie II - Impulse für die Praxis T3 - Regensburger Beiträge zur Digitalisierung des Gesundheitswesens - 3 Y1 - 2023 U6 - https://doi.org/10.14361/9783839467275-006 SP - 57 EP - 69 PB - transcript CY - Bielefeld ER - TY - CHAP A1 - Zahneisen, Anton ED - Weber, Karsten ED - Haug, Sonja ED - Lauer, Norina ED - Mohr, Christa ED - Pfingsten, Andrea ED - Raptis, Georgios ED - Bahr, Gudrun T1 - 9x Ofra: Technikunterstütztes Wohnen als Beitrag zur Verbesserung der kommunalen Daseinsvorsorge T2 - Digitale Technik für ambulante Pflege und Therapie II - Impulse für die Praxis T3 - Regensburger Beiträge zur Digitalisierung des Gesundheitswesens - 3 Y1 - 2023 U6 - https://doi.org/10.14361/9783839467275-017 SP - 199 EP - 216 PB - transcript CY - Bielefeld ER - TY - JOUR A1 - Zauner, Martin T1 - Rezension vom 12.01.2021 zu: Noa Vera Zanolli: Vom guten Umgang mit Differenzen. Mediatives Denken. Wolfgang Metzner Verlag GmbH (Frankfurt am Main) 2020. ISBN 978-3-96117-062-3 JF - socialnet Rezensionen Y1 - 2021 UR - https://www.socialnet.de/rezensionen/27441.php ER - TY - JOUR A1 - Zauner, Martin T1 - Erstellung und Herausgabe der Ausgabe Nr.34/2019 des Literatur- und Lebensweltmagazins "Krass" in Kooperation mit dem Krass e.V., dem ambulanten Dienst Schulbegleitungen und dem Kinderzentrum St. Vincent (beide KJF Regensburg), dem Thomas-Wiser-Haus in Regenstauf, der Kontaktstelle Elternhaus-Schule Regensburg, der Evangelischen Jugendsozialarbeit (EJSA) Regensburg und dem KAI e.V. Kelheim T2 - Krass Y1 - 2020 IS - 34 ER - TY - JOUR A1 - Zauner, Martin T1 - Rezension vom 10.01.2017 zu: Janine Berg-Peer: Moderation von Selbsthilfegruppen. Ein Leitfaden. Psychiatrie Verlag GmbH (Köln) 2016. ISBN 978-3-88414-651-4 JF - socialnet Rezensionen Y1 - 2017 UR - https://www.socialnet.de/rezensionen/21074.php SN - 2190-9245 ER - TY - JOUR A1 - Zauner, Martin T1 - Rezension vom 26.05.2021 zu: Martin Baumann, Christoph Gordalla: Gruppenarbeit. Methoden - Techniken - Anwendungen. UTB (Stuttgart) 2020. 2., aktualisierte und erweiterte Auflage. ISBN 978-3-8252-5274-8 JF - socialnet Rezensionen Y1 - 2021 UR - https://www.socialnet.de/rezensionen/27195.php ER - TY - CHAP A1 - Zehner, Alexander A1 - Szalo, Alexander Eduard A1 - Palm, Christoph T1 - GraphMIC: Easy Prototyping of Medical Image Computing Applications T2 - Interactive Medical Image Computing (IMIC), Workshop at the Medical Image Computing and Computer Assisted Interventions (MICCAI 2015), 2015, Munich N2 - GraphMIC is a cross-platform image processing application utilizing the libraries ITK and OpenCV. The abstract structure of image processing pipelines is visually represented by user interface components based on modern QtQuick technology and allows users to focus on arrangement and parameterization of operations rather than implementing the equivalent functionality natively in C++. The application's central goal is to improve and simplify the typical workflow by providing various high level features and functions like multi threading, image sequence processing and advanced error handling. A built-in python interpreter allows the creation of custom nodes, where user defined algorithms can be integrated to extend basic functionality. An embedded 2d/3d visual-izer gives feedback of the resulting image of an operation or the whole pipeline. User inputs like seed points, contours or regions are forwarded to the processing pipeline as parameters to offer semi-automatic image computing. We report the main concept of the application and introduce several features and their implementation. Finally, the current state of development as well as future perspectives of GraphMIC are discussed KW - Bildverarbeitung KW - Medizin Y1 - 2015 U6 - https://doi.org/10.13140/RG.2.1.3718.4725 N1 - Open-Access-Publikation SP - 395 EP - 400 ER - TY - GEN A1 - Zellmer, Stephan A1 - Rauber, David A1 - Probst, Andreas A1 - Weber, Tobias A1 - Braun, Georg A1 - Römmele, Christoph A1 - Nagl, Sandra A1 - Schnoy, Elisabeth A1 - Messmann, Helmut A1 - Ebigbo, Alanna A1 - Palm, Christoph T1 - Artificial intelligence as a tool in the detection of the papillary ostium during ERCP T2 - Endoscopy N2 - Aims Endoscopic retrograde cholangiopancreaticography (ERCP) is the gold standard in the diagnosis as well as treatment of diseases of the pancreatobiliary tract. However, it is technically complex and has a relatively high complication rate. In particular, cannulation of the papillary ostium remains challenging. The aim of this study is to examine whether a deep-learning algorithm can be used to detect the major duodenal papilla and in particular the papillary ostium reliably and could therefore be a valuable tool for inexperienced endoscopists, particularly in training situation. Methods We analyzed a total of 654 retrospectively collected images of 85 patients. Both the major duodenal papilla and the ostium were then segmented. Afterwards, a neural network was trained using a deep-learning algorithm. A 5-fold cross-validation was performed. Subsequently, we ran the algorithm on 5 prospectively collected videos of ERCPs. Results 5-fold cross-validation on the 654 labeled data resulted in an F1 value of 0.8007, a sensitivity of 0.8409 and a specificity of 0.9757 for the class papilla, and an F1 value of 0.5724, a sensitivity of 0.5456 and a specificity of 0.9966 for the class ostium. Regardless of the class, the average F1 value (class papilla and class ostium) was 0.6866, the sensitivity 0.6933 and the specificity 0.9861. In 100% of cases the AI-detected localization of the papillary ostium in the prospectively collected videos corresponded to the localization of the cannulation performed by the endoscopist. Conclusions In the present study, the neural network was able to identify the major duodenal papilla with a high sensitivity and high specificity. In detecting the papillary ostium, the sensitivity was notably lower. However, when used on videos, the AI was able to identify the location of the subsequent cannulation with 100% accuracy. In the future, the neural network will be trained with more data. Thus, a suitable tool for ERCP could be established, especially in the training situation. Y1 - 2024 U6 - https://doi.org/10.1055/s-0044-1783138 VL - 56 IS - S 02 SP - S198 PB - Thieme CY - Stuttgart ER - TY - GEN A1 - Zellmer, Stephan A1 - Rauber, David A1 - Probst, Andreas A1 - Weber, Tobias A1 - Nagl, Sandra A1 - Römmele, Christoph A1 - Schnoy, Elisabeth A1 - Palm, Christoph A1 - Messmann, Helmut A1 - Ebigbo, Alanna T1 - Verwendung künstlicher Intelligenz bei der Detektion der Papilla duodeni major T2 - Zeitschrift für Gastroenterologie N2 - Einleitung Die Endoskopische Retrograde Cholangiopankreatikographie (ERCP) ist der Goldstandard in der Diagnostik und Therapie von Erkrankungen des pankreatobiliären Trakts. Jedoch ist sie technisch sehr anspruchsvoll und weist eine vergleichsweise hohe Komplikationsrate auf. Ziele  In der vorliegenden Machbarkeitsstudie soll geprüft werden, ob mithilfe eines Deep-learning-Algorithmus die Papille und das Ostium zuverlässig detektiert werden können und somit für Endoskopiker mit geringer Erfahrung ein geeignetes Hilfsmittel, insbesondere für die Ausbildungssituation, darstellen könnten. Methodik Wir betrachteten insgesamt 606 Bilddatensätze von 65 Patienten. In diesen wurde sowohl die Papilla duodeni major als auch das Ostium segmentiert. Anschließend wurde eine neuronales Netz mittels eines Deep-learning-Algorithmus trainiert. Außerdem erfolgte eine 5-fache Kreuzvaldierung. Ergebnisse Bei einer 5-fachen Kreuzvaldierung auf den 606 gelabelten Daten konnte für die Klasse Papille eine F1-Wert von 0,7908, eine Sensitivität von 0,7943 und eine Spezifität von 0,9785 erreicht werden, für die Klasse Ostium eine F1-Wert von 0,5538, eine Sensitivität von 0,5094 und eine Spezifität von 0,9970 (vgl. [Tab. 1]). Unabhängig von der Klasse zeigte sich gemittelt (Klasse Papille und Klasse Ostium) ein F1-Wert von 0,6673, eine Sensitivität von 0,6519 und eine Spezifität von 0,9877 (vgl. [Tab. 2]). Schlussfolgerung  In vorliegende Machbarkeitsstudie konnte das neuronale Netz die Papilla duodeni major mit einer hohen Sensitivität und sehr hohen Spezifität identifizieren. Bei der Detektion des Ostiums war die Sensitivität deutlich geringer. Zukünftig soll das das neuronale Netz mit mehr Daten trainiert werden. Außerdem ist geplant, den Algorithmus auch auf Videos anzuwenden. Somit könnte langfristig ein geeignetes Hilfsmittel für die ERCP etabliert werden. KW - Künstliche Intelligenz Y1 - 2023 UR - https://www.thieme-connect.de/products/ejournals/abstract/10.1055/s-0043-1772000 U6 - https://doi.org/10.1055/s-0043-1772000 VL - 61 IS - 08 PB - Thieme CY - Stuttgart ER - TY - JOUR A1 - Zellner, Johannes A1 - Hierl, Katja A1 - Mueller, Michael A1 - Pfeifer, Christian A1 - Berner, Arne A1 - Dienstknecht, Thomas A1 - Krutsch, Werner A1 - Geis, Sebastian A1 - Gehmert, Sebastian A1 - Kujat, Richard A1 - Dendorfer, Sebastian A1 - Prantl, Lukas A1 - Nerlich, Michael A1 - Angele, Peter ED - Gilbert, Jeremy T1 - Stem cell-based tissue-engineering for treatment of meniscal tears in the avascular zone JF - Journal of Biomedical Materials Research Part B Applied Biomaterials N2 - Meniscal tears in the avascular zone have a poor self-healing potential, however partial meniscectomy predisposes the knee for early osteoarthritis. Tissue engineering with mesenchymal stem cells and a hyaluronan collagen based scaffold is a promising approach to repair meniscal tears in the avascular zone. 4 mm longitudinal meniscal tears in the avascular zone of lateral menisci of New Zealand White Rabbits were performed. The defect was left empty, sutured with a 5-0 suture or filled with a hyaluronan/collagen composite matrix without cells, with platelet rich plasma or with autologous mesenchymal stem cells. Matrices with stem cells were in part precultured in chondrogenic medium for 14 days prior to the implantation. Menisci were harvested at 6 and 12 weeks. The developed repair tissue was analyzed macroscopically, histologically and biomechanically. Untreated defects, defects treated with suture alone, with cell-free or with platelet rich plasma seeded implants showed a muted fibrous healing response. The implantation of stem cell-matrix constructs initiated fibrocartilage-like repair tissue, with better integration and biomechanical properties in the precultured stem cell-matrix group. A hyaluronan-collagen based composite scaffold seeded with mesenchymal stem cells is more effective in the repair avascular meniscal tear with stable meniscus-like tissue and to restore the native meniscus. KW - biomechanics KW - meniscus KW - scaffolds KW - stem cells KW - tissue engineering KW - Meniskusschaden KW - Tissue Engineering KW - Mesenchymzelle KW - Hyaluronsäure Y1 - 2013 U6 - https://doi.org/10.1002/jbm.b.32922 VL - 101 IS - 7 SP - 1133 EP - 1142 ER - TY - CHAP A1 - Zerth, Jürgen ED - Weber, Karsten ED - Haug, Sonja ED - Lauer, Norina ED - Mohr, Christa ED - Pfingsten, Andrea ED - Raptis, Georgios ED - Bahr, Gudrun T1 - Digitale Technik für Pflege und Gesundheit: Wie kann eine Sorgestruktur in Zukunft gestaltet sein? Ein Plädoyer für die notwendige Gleichzeitigkeit von lernenden und effizienzsuchenden Gestaltungsoptionen in der Pflege T2 - Digitale Technik für ambulante Pflege und Therapie II - Impulse für die Praxis T3 - Regensburger Beiträge zur Digitalisierung des Gesundheitswesens - 3 Y1 - 2023 U6 - https://doi.org/10.14361/9783839467275-009 SP - 99 EP - 113 PB - transcript CY - Bielefeld ER - TY - JOUR A1 - Zhao, Fang A1 - Gaschler, Robert T1 - Sending motivational emails in text–picture personalised form can be feasible in e-learning: An asynchronous course case JF - Open Learning: The Journal of Open, Distance and e-Learning N2 - ntervention with motivational emails can have a positive effect on course retention in e-learning. It is, however, not yet clear whether different forms of emails affect course retention and how students make progress during the sending of emails. We therefore used a voluntary asynchronous online course with 206 students. Students were randomly divided into four groups: text–picture personalised email vs. text personalised email vs. generalised email vs. no email. Emails were sent weekly for 3 months. Results yield that more students made progress in the text–picture personalised email group than in the control group. Students in all email groups progressed by more units than students in the control group. Only students in email groups completed the course and only students in personalised email groups reacted to the emails. Emails were accepted by most students enrolled. The findings suggest that cost-effective and easily implemented emails can encourage students to progress from unit to unit. KW - Motivational email KW - personalisation KW - progress KW - completion rate KW - student reactions Y1 - 2024 U6 - https://doi.org/10.1080/02680513.2024.2326002 SP - 1 EP - 15 PB - Taylor & Francis ER - TY - JOUR A1 - Zucchi, Jose William A1 - Franco, Estefania Aparecida Thome A1 - Schreck, Thomas A1 - Castro Silva, Maria Helena A1 - Migliorini, Sandro Rogério dos Santos A1 - Garcia, T. A1 - Mota, G. A. F. A1 - de Morais, Bruna Evelyn Bueno A1 - Machado, L. H. S. A1 - Batista, A. N. R. A1 - de Pavia, Sergio A1 - de Godoy, I. A1 - Tanni, Suzana T1 - Different Clusters in Patients with Chronic Obstructive Pulmonary Disease (COPD) BT - A Two-Center Study in Brazil JF - International Journal of chronic obstructive pulmonary disease N2 - Background: Chronic obstructive pulmonary disease (COPD) has a functional definition. However, differences in clinical characteristics and systemic manifestations make COPD a heterogeneous disease and some manifestations have been associated with different risks of acute exacerbations, hospitalizations, and death. Objective: Therefore, the objective of the study was to evaluate possible clinical clusters in COPD at two study centers in Brazil and identify the associated exacerbation and mortality rate during 1 year of follow-up. Methods: We included patients with COPD and all underwent an evaluation composed of the Charlson Index, body mass index (BMI), current pharmacological treatment, smoking history (packs-year), history of exacerbations/hospitalizations in the last year, spirometry, six-minute walking test (6MWT), quality of life questionnaires, dyspnea, and hospital anxiety and depression scale. Blood samples were also collected for measurements of C-reactive protein (CRP), blood gases, laboratory analysis, and blood count. For the construction of the clusters, 13 continuous variables of clinical importance were considered: hematocrit, CRP, triglycerides, low density lipoprotein, absolute number of peripheral eosinophils, age, pulse oximetry, BMI, forced expiratory volume in the first second, dyspnea, 6MWD, total score of the Saint George Respiratory Questionnaire and packs-year of smoking. We used the Ward and K-means methods and determined the best silhouette value to identify similarities of individuals within the cluster (cohesion) in relation to the other clusters (separation). The number of clusters was determined by the heterogeneity values of the cluster, which in this case was determined as four clusters. Results: We evaluated 301 COPD patients and identified four different groups of COPD patients. The first cluster (203 patients) was characterized by fewer symptoms and lower functional severity of the disease, the second cluster by higher values of peripheral eosinophils, the third cluster by more systemic inflammation and the fourth cluster by greater obstructive severity and worse gas exchange. Cluster 2 had an average of 959 3 peripheral eosinophils, cluster 3 had a higher prevalence of nutritional depletion (46.1%), and cluster 4 had a higher BODE index. Regarding the associated comorbidities, we found that only obstructive sleep apnea syndrome and pulmonary thromboembolism were more prevalent in cluster 4. Almost 50% of all patients presented an exacerbation during 1 year of follow-up. However, it was higher in cluster 4, with 65% of all patients having at least one exacerbation. The mortality rate was statistically higher in cluster 4, with 26.9%, vs 9.6% in cluster 1. Conclusion: We could identify four clinical different clusters in these COPD populations, that were related to different clinical manifestations, comorbidities, exacerbation, and mortality rate. We also identified a specific cluster with higher values of peripheral eosinophils. KW - AIRWAY DISEASE KW - BIOMARKERS KW - BLOOD EOSINOPHILS KW - cluster analysis KW - COMORBIDITIES KW - COPD KW - COPD phenotype KW - Dyspnea KW - eosinophils KW - Identification KW - Impact KW - inflammation KW - lung function KW - Overlap syndrome KW - Prevention Y1 - 2020 U6 - https://doi.org/10.2147/COPD.S268332 VL - 15 SP - 2847 EP - 2856 PB - Dove Medical Press ER - TY - BOOK A1 - Zürner, Christian T1 - Ästhetisches Sorgen T3 - Edition Kulturwissenschaft N2 - Ästhetik reflektiert Kunst, kaum aber deren konkrete Verwendungsformen. Um zu verstehen, was Kunst ist, muss sie jedoch als spezifische Situationen konstituierende besondere Praxis untersucht werden. Kunst ist kein Erkennen oder Erfahren, sondern strategisches Tun: Als (feierliches) ästhetisches Sorgen kultiviert sie in öffentlichen wie privaten Kontexten eine Praxis existenziellen kultischen Sorgens. Christian Zürner hinterfragt ästhetische Topoi wie Autonomie und (Zweck-)Freiheit angesichts solch immanenter Notwendigkeit ebenso wie normative philosophische Zuschreibungen. Kunst bedeutet keinen souveränen Überschuss, sondern lebt vom Drang, menschliche Existenz in einer unheimlichen Welt überhaupt erst einzurichten. KW - ART KW - Ästhetik KW - Autonomie KW - Existenz KW - Freiheit KW - Kulturphilosophie KW - Kulturtheorie KW - Kunst KW - Künste KW - Kunsttheorie KW - Kunstwissenschaft KW - Liberty KW - Praxis KW - Theorie der Kunst Y1 - 2020 SN - 978-3-8376-5454-7 U6 - https://doi.org/10.14361/9783839454541 PB - transcript CY - Bielefeld ER - TY - JOUR A1 - Zürner, Christian T1 - Rezension vom 20.03.2020 zu: Gernot Heinrich Willy Graeßner, Martin Hendrik Kurz (Hrsg.): Einführung in das Bildungs- und Kulturmanagement. ZIEL Verlag (Augsburg) 2018. ISBN 978-3-944708-87-4 JF - socialnet Rezensionen Y1 - 2020 UR - https://www.socialnet.de/rezensionen/25916.php SN - 2190-9245 ER - TY - CHAP A1 - Świgoń, Marzena A1 - Weber, Karsten ED - Babik, Wieslaw ED - Ohly, Heinz Peter ED - Weber, Karsten T1 - Knowledge and Information Management by Individuals BT - A Report on Empirical Research among German Students T2 - Theorie, Semantik und Organisation von Wissen N2 - The concept of Personal Knowledge and Information Management (PKIM) is, among others, based on two heories: Personal Information Management (PIM) and Personal Knowledge Management (PKM) which were, hitherto, the subject of separate studies. Moreover, the PKIM concept is relating to the so-called Information Literacy (IL), which is a concept of information skills and competences of individuals. According to the literature, in practice the person who manages knowledge has to be information literate. Some of the empirical studies results in the PKIM scope, started in Poland (Świgoń, 2012) and recently conducted in Germany, are presented in this article. The aim of the PKIM empirical studies was to get to know the individuals’ opinions about management of knowledge and information in the context of learning and studying. This part of the studies in Germany asked the following research questions (analogical to studies in Poland): 1. What are the main definitions, dimensions and manifestations of management of knowledge and information through the eyes of individuals (students)?; 2. What is the difference, if any, between knowledge management and information management in the opinion of students?; 3. What is the role of knowledge and information management in studying and other spheres of life?; 4.Which factors influence management of knowledge and information in students’ opinion? The qualitative method was used with an unstructured questionnaire. Respondents were asked to share their own opinions according to the abovementioned open questions in a written form. Questionnaires were distributed during classes at the Brandenburg University of Technology, Cottbus (BTU) in January 2013. Finally 62 opinions were analysed. In the light of these empirical studies results, as well as the literature review Świgoń, 2012), three concepts: PIM, PKM and IL are compatible and merged with each other. Individuals perceive knowledge and information as well as knowledge management (KM) and information management (IM) as integrated areas of interests. Although they do see differences between them (knowledge vs. information, KM vs. IM), the issue of interconnections and relations seem more important. KIM is the process of following steps: gathering, selecting, organising, disseminating and using. In the context of personal knowledge and information, this process involves personal needs, objectives and benefits. Individuals understand that this process, or set of activities is strongly connected with their and skills. These are not only the so-called information skills, but knowledge skills as well, because they tion of new information and knowledge. Sometimes KIM is perceived as a way of coping with information ovabilities involve creative thinking, reflection and creaerload. Thiscompetence is not easy and depends on personal abilities, especially in selecting of information. Moreover, it depends on appropriate education and training, sometimes on other people, colleagues and experts, and sometimes on technology. All factors and variables influencing on KIM can be negative or positive in their nature. Furthermore, they are related to three categories: personal characteristics, environment (macro and micro environment), and to knowledge and information sources. KW - information management KW - knowledge management KW - personal knowledge KW - personal information KW - information literacy KW - information behaviour KW - knowledge behaviour Y1 - 2017 U6 - https://doi.org/10.5771/9783956503269-373 SP - 373 EP - 386 PB - Ergon CY - Würzburg ER - TY - GEN ED - Rudolph, Clarissa ED - Reber, Anne ED - Dollsack, Sophia T1 - Geschlechtergerechtigkeit und MINT BT - Irritationen, Ambivalenzen und Widersprüche in Geschlechterdiskursen an Hochschulen KW - Hochschule KW - MINT-Fächer KW - Gleichstellung KW - Frauenförderung Y1 - 2022 SN - 978-3-8474-1674-6 U6 - https://doi.org/10.3224/84742519 PB - Verlag Barbara Budrich CY - Opladen ; Berlin ; Toronto ER - TY - CHAP ED - Bach, Miriam ED - Narawitz, Lena ED - Schroeder, Joachim ED - Thielen, Marc ED - Thönneßen, Niklas-Max T1 - "So geht's lang! Die Berufsintegrationsklassen für Geflüchtete in Bayern: Modell der Zukunft für die Ausbildungs- und Berufsintegration von Neuzugewanderten - mit einem vergleichenden Blick auf Großbritannien" T2 - FluchtMigrationsForschung im Widerstreit. Über Ausschlüsse durch Integration Y1 - 2021 SN - 9783830944416 U6 - https://doi.org/10.31244/9783830994411 SP - 67 EP - 82 PB - Waxmann CY - Münster; New York ER - TY - BOOK ED - Weber, Karsten ED - Friesen, Hans ED - Zoglauer, Thomas T1 - Philosophie und Phantastik KW - Das Fantastische KW - Fantasie KW - Film KW - Literatur KW - Philosophie KW - Spiel Y1 - 2016 SN - 978-3-95743-073-1 PB - Mentis CY - Münster ER -