TY - CHAP A1 - Chow, Rosan A1 - Frommeld, Debora A1 - Glanz, Jessica A1 - Boettger, Lars A1 - Stadlbauer, Jana A1 - Weber, Karsten ED - Palinko, Oskar T1 - Envision a Future of Living with Robots through Participatory Theatre BT - A Field Report T2 - Social Robotics N2 - With the goal to facilitate societal discussion, the interactive exhibitioin “Living with Robots”, open to the public at the Science Night in Regens-burg, Germany in 2024 gave visitors the opportunity to imagine a life with robots at home, at work, for care, and education. It was set up with multiple stations of which an improvisation theatre was the highlight. Most of public presentations of robots emphasize the power of technology; the exhibition was intentionally designed to set apart from this. We chose theatric play as the medium of engagement and communication, and it was shown to be fruitful. In this paper, we draw implications from our experiences and present some preliminary results on the public opinions of living with robots. Y1 - 2025 SN - 978-981-96-3519-1 U6 - https://doi.org/10.1007/978-981-96-3519-1_42 SN - 1611-3349 SP - 470 EP - 475 PB - Springer Nature CY - Singapore ER - TY - JOUR A1 - Bartsch, Alexander A1 - Beham, Daniela A1 - Gebhardt, Jakob A1 - Ehrlich, Ingo A1 - Schratzenstaller, Thomas A1 - Monkman, Gareth J. T1 - Mechanical Properties of NdPrFeB Based Magnetoactive Bisphenol-Free Boron-Silicate Polymers JF - Journal of Nanomedicine and Nanotechnology N2 - Following a ban on many materials containing bisphenol-A, new bisphenol-free Boron silicates have been found as substitutes. The purpose of this study is to describe the mechanical properties of these bisphenol-free magnetoactive borosilicate polymers containing hard magnetic particles. Samples of 0%, 33% and 66% by wt. were loaded for compression using a universal testing machine. The maximum forces occurring for different travel speeds were compared before and after post-magnetization treatments. The post-magnetization included 2 stages. In addition, the change in mechanical properties within 24 hours after the post-magnetization process was investigated. Furthermore, the influence of speed and particle content were investigated. In general, there is a correlation between the required compressive force and, the level of post-magnetization stress, the increase in travel speed and particle content in the boron silicate. Comparison of the non-post-magnetized and post-magnetized samples using two-tailed t-tests shows that the p-values for all weight fraction changes in NdPrFeB particles and travel speeds are less than 0.001. Also, a comparison between tests in which the traverse speed was varied also showed significant changes in the resulting compression forces. The same is valid for changes in the weight ratio of the NdPrFeB particles in the samples. For post-magnetized samples, no significant difference can be observed in the first 24 hours following magnetization. In summary, the material presents viscoelastic, plastic force-displacement behavior, which can be well recognized by its bi-linear curve shape. The investigation shows that borosilicate polymers based on NdPrFeB can have their mechanical behavior modified and controlled by post-magnetization processes. This opens new possibilities for many future applications. Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-67425 UR - https://www.walshmedicalmedia.com/open-access/mechanical-properties-of-ndprfeb-based-magnetoactive-bisphenolfree-boronsilicate-polymers-124385.html SN - 2157-7439 N1 - Corresponding author: Alexander Bartsch VL - 14 IS - 6 PB - Walsh Medical Media ER - TY - CHAP A1 - Heese, Carl A1 - Thaler, Tilman ED - Mührel, Eric ED - Birgmeier, Bernd T1 - Ökonomisierung des Fachdiskurses? Empirische Analyse der Zeitschrift Sozialmagazin T2 - Soziale Arbeit in der Ökonomisierungsfalle N2 - Die Ökonomisierung der Sozialen Arbeit ist ein vieldiskutiertes und kontroverses Th ema. Das Spektrum der Diskussion reicht dabei von der affi rmativen Aufnahme der Th ematik mit Beiträgen zu dem relativ neuen Th ema des Sozialmanagements bis zur detaillierten Beschreibung einer negativen sozial-politischen Tendenz, für deren Charakteristik der Begriff der Ökonomisierung überwiegend pejorativ gebraucht wird. Hier werden häufi g Vorgänge problematisiert, indem ökonomische Rücksichten als imperative Verdrängungen der Eigenlogik der Sozialen Arbeit interpretiert werden. Die affi rmative Aufnahme hat ihren systematischen Niederschlag in der Formulierung von klassischen Sozialmanagementmodellen wie dem Freiburger Managementmodell (siehe Schwarz 2000) und dem Bielefelder Diakonie-Managementmodell (siehe Lohmann 1997) gefunden. Ihr in die Praxis wirkendes Pendant stellt die expansive Entwicklung von Studiengängen für das Sozialmanagement dar (vgl. Boeßenecker/Markert 2007). Der andere Pol der Diskussion wird exemplarisch durch das „Schwarzbuch Soziale Arbeit“ (Seithe 2011) repräsentiert. KW - Soziale Arbeit Y1 - 2016 SN - 978-3-658-13060-2 U6 - https://doi.org/10.1007/978-3-658-13060-2_7 SP - 95 EP - 106 PB - VS Springer CY - Wiesbaden ET - 1. Aufl. ER - TY - JOUR A1 - Heese, Carl A1 - Stein, Margit ED - Stein, Margit ED - Heese, Carl T1 - Auf welche Schlüsselqualifikationen kommt es an? Ausbilder und Auszubildende bewerten JF - Der Modellversuch "Leistungsstarke Auszubildende nachhaltig fördern". Wissenschaftliche Diskussionspapiere KW - Berufliche Bildung Y1 - 2003 IS - 67 SP - 93 EP - 104 PB - BIBB CY - Bonn ER - TY - JOUR A1 - Heese, Carl ED - Heese, Carl ED - Stein, Margits T1 - Modellversuch "Leistungsstarke Auszubildende nachhaltig fördern" - Ziele und Konzeption JF - Der Modellversuch "Leistungsstarke Auszubildende nachhaltig fördern" KW - Berufliche Bildung Y1 - 2003 IS - 67 SP - 19 EP - 30 PB - BIBB CY - Bonn ER - TY - CHAP A1 - Heese, Carl A1 - Stein, Margit ED - Holz, H. ED - Schremme, D. T1 - Evaluationsansätze in der Modellversuchsforschung T2 - Wissenschaftliche Begleitforschung bei der Neugestaltung des Lernens KW - Berufliche Bildung Y1 - 2005 SN - 9783763910496 SP - 221 EP - 230 PB - Bertelsmann CY - Bielefeld ER - TY - JOUR A1 - Heese, Carl T1 - Schulentwicklung durch "Persönliche Projekte" JF - Schul-Managment: Die Zeitschrift für Schulleitung und Schulpraxis KW - Schulmanagment Y1 - 2010 SN - 0341-8235 VL - 41 IS - 5 SP - 27 EP - 29 PB - Cornelsen Schulverlage CY - München ER - TY - JOUR A1 - Heese, Carl A1 - Waldmüller, Norbert T1 - Interkulturelles Management: Benötigt das Krankenhaus Integrationsbeauftragte? JF - Das Krankenhaus KW - Krankenhausmanagment Y1 - 2010 SN - 0340-3602 VL - Vol. 102 SP - 867 EP - 869 PB - Kohlhammer CY - Stuttgart ER - TY - JOUR A1 - Heese, Carl ED - Haferkamp, Hermann T1 - Das Qualitätswesen einer Rehaeinrichtung: Wie kann man das als Patient oder Angehöriger nutzen? JF - Wachkoma und danach KW - Rehabilitation Y1 - 2005 VL - 9 IS - 4 SP - 52 EP - 55 ER - TY - JOUR A1 - Heese, Carl A1 - Wiederer, Ralf T1 - Neue Rollenverteilung in der Arztassistenz JF - Führen und Wirtschaften im Krankenhaus: F & W KW - Krankenhausmanagement Y1 - 2007 VL - 24 IS - 5 SP - 500 EP - 502 PB - Bibliomed-Medizinische Verlagsges. CY - Melsungen ER - TY - CHAP A1 - Schaeffer, Leon A1 - Herrmann, David A1 - Böhm, Valter T1 - Preliminary theoretical considerations of a hand orthosis based on a prestressed, compliant structure T2 - Proceedings of the 2023 International Symposium on Medical Robotics (ISMR), Atlanta, 19-21 April 2023 N2 - In the treatment of hand injuries in the context of orthopedic care, movable hand orthoses are used in many cases. Early motion therapy is in most cases advantageous for adequate, rapid, and successful long-term healing of the hand. Conventional mobile hand orthoses can only be used for movement therapy to a limited extent since they represent the wrist as a simple rotating joint and neglect the complexity of the movement possibilities of the hand. In this paper, a novel concept for movable hand orthoses based on prestressed compliant structures is presented. The advantage with this concept is that it replicates the multiaxial motion capabilities without the need for conventional joints. Besides the derivation and description of the concept, a first three-dimensional CAD design is shown. Additionally, the next planned steps in the development of such a novel dynamic hand orthosis are described. Y1 - 2023 U6 - https://doi.org/10.1109/ISMR57123.2023.10130230 SP - 1 EP - 7 PB - IEEE ER -