TY - CHAP A1 - Schmailzl, Marc A1 - Spitzhirn, M. A1 - Eder, Friedrich A1 - Krüll, Georg A1 - Obergrießer, Mathias A1 - Linner, Thomas A1 - Albalkhy, Wassim A1 - Lafhaj, Zoubeir T1 - Towards interfacing human centered design processes with the AEC industry by leveraging BIM-based planning methodologies T2 - 40th International Symposium on Automation and Robotics in Construction (ISARC 2023): Chennai, India, July 3–9, 2023 N2 - Digital workflows in the Architecture, Engineering and Construction (AEC) industry have been working with a wide range of software solutions trying to enable a Design-to-Production (DtP) end-to-end data flow. Thereby, state-of-the-art software solutions attempt to streamline the design and production processes accordingly. However, most digital workflows lack in terms of adequate sequential data preparation, agglomeration, and interfacing capabilities for consecutive design phases. These issues result in long, tedious correction loops, a wide range of software solutions and extensions to mitigate the issues. In addition, many digital workflows do not consider or integrate construction, production and machine relevant data holistically (respectively geometry and semantics). In this context, the production relevant data in from of human-centered work process data referring to digital human models (DHM), derived human abilities, safety and ergonomic criteria are often neglected. However, this is essential to interface the construction, human and machine relevant data in a holistic manner. This paper therefore proposes a DtP-workflow which is intended to solve some of the issues by interfacing relevant software solutions incorporating construction, production (including DHM and more) and machine relevant data in a holistic manner using a Building Information Modeling (BIM)-approach (based on the IFC schema). In this regard, the DtP-workflow aims to reverse common top-down digital workflows by considering and integrating the relevant data for consecutive design phases from the beginning. Subsequently, the DtP-workflow should achieve a reduction in planning effort. KW - Architecture Engineering and Construction (AEC) industry KW - Building Information Modeling (BIM) KW - Interoperability KW - Digital Human model (DHM) Y1 - 2023 SN - 978-0-6458322-0-4 U6 - https://doi.org/10.22260/ISARC2023/0045 SN - 2413-5844 SP - 325 EP - 332 PB - I.A.A.R.C. ER - TY - CHAP A1 - Ji, Yang A1 - Borrmann, André A1 - Obergrießer, Mathias T1 - Toward the exchange of parametric bridge models using a neutral data format T2 - Computing in Civil Engineering 2011, Proceedings of the 2011 ASCE International workshop ORKSHOP on Computing in civil engineering, June 19-22, 2011, Miami, Florida N2 - While there are mature data models for exchanging semantically rich building models, no means for exchanging bridge models using a neutral data format exist so far. A major challenge lies in the fact that a bridge's geometry is often described in parametric terms, using geometric constraints and mathematical expressions to describe dependencies between different dimensions. Since the current draft of IFC-Bridge does not provide a parametric geometric description, this paper presents a possible extension and describes in detail the object-oriented data model proposed to capture parametric design including geometric and dimensional constraints. The feasibility of the concept has been verified by actually implementing the exchange of parametric models between two different computer-aided design (CAD) applications. Y1 - 2011 U6 - https://doi.org/10.1061/41182(416)65 SP - 528 EP - 535 PB - American Society of Civil Engineers ASCE CY - Reston, VA ER - TY - CHAP A1 - Koch, H. A1 - Imamovic, D. A1 - Lutz, B. A1 - Neidhart, Thomas A1 - Rogler, R.-D. T1 - High power underground transmission for HV DC T2 - CIGRE Session 46 : from 21 till 26 August 2016 Y1 - 2016 UR - https://cigre.es/wp-content/uploads/2016/08/call-for-papers.pdf PB - CIGRÉ CY - Paris ET - 1 DVD-ROM ER - TY - CHAP A1 - Obergrießer, Mathias A1 - Borrmann, Andre T1 - Infrastructural BIM standards-development of an Information Delivery Manual for the geotechnical infrastructural design and analysis process T2 - eWork and eBusiness in Architecture, Engineering and Construction - proceedings of the 9th European Conference on Product and Process Modelling 2012, Reykjavik, Iceland,25-27 July 2012 N2 - Defining infrastructural BIM standards is an essential issue to successfully implement BIM in the civil engineering domain and to gain acceptance of engineers, software developers and executive users. For this reason the paper proposes a way to improve collaboration between the geomechanical infrastructural design and analysis process, by introducing an infrastructural Information Delivery Manual (IDM). To realize IDM, the traditional geomechanical infrastructural use case was defined and the process specific workflow (activities & data exchange) was determined by developing an infrastructural process map. In order to ensure correct data exchange between the involved processes various Exchange Requirements (ER) were specified. But to the effect an infrastructural product model like IFC is still not available, the data exchange as well as the ER specification was made by different formats. At the end of this research activity the Model View Definition (MVD) was discussed. Y1 - 2012 UR - https://publications.cms.bgu.tum.de/2012_Obergriesser_ECPPM.pdf SP - 581 EP - 587 PB - Taylor & Francis ER - TY - JOUR A1 - Schorr, Markus A1 - Borrmann, André A1 - Obergrießer, Mathias A1 - Ji, Yang A1 - Günthner, Willibald A. A1 - Rank, Ernst T1 - Employing product data management systems in civil engineering projects: Functionality analysis and assessment JF - Journal of soft computing in civil engineering : SCCE N2 - Product Data Management (PDM) systems are well established in the manufacturing industry. Here, they form the standard solution for the central storage of all data relating to a product and the processes involved in its manufacture. Particularly the consistent management of CAD models, including sophisticated versioning techniques and access rights management as well as the integrated workflow management are attractive features for using PDM systems also for civil engineering projects. This paper investigates the technical concepts behind PDM systems and compares their suitability as a data management solution in civil engineering projects with that of Document Management Systems and Product Model Servers. Alongside a comparative study of the major PDM systems available on the market, we also present a case study involving a PDM system that has been employed for a concrete civil engineering project. Y1 - 2011 UR - https://publications.cms.bgu.tum.de/2011_Schorr_PDM.pdf VL - 25 IS - 6 SP - 430 EP - 441 PB - ASCE CY - New York, NY ER - TY - CHAP A1 - Thumann, Maria A1 - Kusterle, Wolfgang ED - Maekawa, Koichi ED - Kasuga, Akio ED - Yamazaki, Jun T1 - Enhanced durability of shotcrete – Reduced potential for precipitations T2 - Proceedings of the 11th fib International PhD Symposium in Civil Engineering. - 29.-31.08.2016, Tokyo, Japan N2 - The contact of underground water with shotcrete leads to leaching of calcium hydroxide and can increase the precipitation of calcite in the secondary drainage system of tunnels under certain conditions. Indeed precipitations in the drainage pipes lead to high maintenance costs. Within a research project the leaching behavior of new and innovative binder compositions was tested in lab tests. One possible change in mix-design is the reduction in clinker content by using a lower amount of Ordinary Portland Cement together with cementitious materials. Successful combinations were further investigated in sprayed mortar and shotcrete tests to examine the influences of the spraying process and the addition of accelerator. The results indicate how shotcrete mix-design can be improved regarding its potential for precipitations and subsequently enhanced durability of shotcrete. Y1 - 2016 SN - 978-4-9909148-0-6 SP - 221 EP - 228 PB - Technical University of Tokyo ER - TY - JOUR A1 - Wagnar, B. A1 - Neidhart, Thomas A1 - Siedentopf, W. A1 - Weidlich, Ingo A1 - Schleyer, A. T1 - Project in the Europaviertel in Frankfurt: Extensometer measurement technique for the quality assurance of the district heating pipelines embedded in temporarily fluid self-compressing construction filling materials JF - Euroheat and Power/Fernwärme International T2 - Projekt im Europaviertel Frankfurt: Extensometermesstechnik zur Qualitätssicherung der in ZFSV gebetteten Fernwarmeleitungen Y1 - 2013 UR - https://www.scopus.com/authid/detail.uri?authorId=55875881100#disabled VL - 42 IS - 12 SP - 35 EP - 39 ER - TY - JOUR A1 - Wagner, Bernd A1 - Neidhart, Thomas A1 - Weidlich, Ingo T1 - Initial findings of the research project: Contact behavior of temporarily fluid, self-compacting backfilling materials and HDPE JF - Euroheat and Power/Fernwärme International T2 - Erste Erkenntnisse des Forschungsvorhabens: Kontaktverhalten von zeitweise fließfähigen, selbstverdichtenden Verfüllbaustoffen und PEHD Y1 - 2013 VL - 42 IS - 10 SP - 26 EP - 29 ER - TY - CHAP A1 - Zeitler, Berndt A1 - Höller, Christoph A1 - Mahn, Jeffrey T1 - Empirical model of direct sound transmission through lightweight wood-framed construction T2 - Implementing noise control technology : 44th International Congress and Exposition on Noise Control Engineering (Internoise 2015) : San Francisco, California, USA, 9 - 12 August 2015 N2 - Tools to predict sound transmission through building elements are beneficial from both amarketing and a research standpoint. Prediction models can assist with the optimization ofelement performance and often reduce both cost and time in projects. However, the morephysical phenomena are to be included in the model, the more input data that is needed,which in some cases can be quite time-consuming and costly to collect. A balance is neededbetween the input and modeling effort and the output, which is usually delivered in onethird octave frequency bands or single number ratings. Many different types of models arecommonly used, including analytical, numerical, and empirical are used, all of which haveadvantages and disadvantages. In this paper, the latter type is presented using a set ofphysical properties of lightweight wood elements, and the errors made in the prediction arequantified. The disadvantage of empirical compared to analytical modeling is that thephysical phenomena are more difficult to identify. The advantage is often the simplicityand accuracy of the prediction results. Y1 - 2015 UR - https://www.researchgate.net/publication/281065914_Empirical_Model_of_Direct_Sound_Transmission_through_Lightweight_Wood-Framed_Construction PB - Curran CY - Red Hook, NY ER - TY - CHAP A1 - Zeitler, Berndt A1 - Mahn, Jeffrey A1 - Sabourin, Ivan A1 - Höller, Christoph A1 - Schoenwald, Stefan T1 - Apparent airborne sound insulation of hybrid wood-concrete masonry assemblies T2 - Euronoise 2015 : 10th European Congress and Exposition on Noise Control Engineering : Maastricht, 31 May - 3 June 2015 N2 - As part of a research project to develop design solutions for concrete-masonry buildings for the Canadian market, the apparent sound insulation performance of hybrid assemblies with concrete masonry walls and wood joist floors was evaluated. In this paper, the effect of junction coupling is investigated in an ISO 15712 flanking prediction context. Airborne flanking path data predicted according to ISO 15712 are compared to data measured using the indirect ISO 10848 shielding method. Recommendations are made on how appropriate the application of ISO 15712 is for this type of hybrid assembly. Y1 - 2015 UR - https://www.conforg.fr/euronoise2015/proceedings/data/articles/000436.pdf SP - 2515 EP - 2520 CY - Maastricht ER - TY - JOUR A1 - Thiel, Charlotte A1 - Strasser, Juliane A1 - Obergrießer, Mathias A1 - Linner, Thomas T1 - Strategien zur Implementierung der Kreislaufwirtschaft beim Bauen mit Beton JF - Beton- und Stahlbetonbau N2 - Beton ist das am meisten verwendete Baumaterial weltweit. CO2-Emissionen, die bei der Zement- und Betonherstellung an-fallen, müssen reduziert, Produktionsmethoden verbessert und Betonzusammensetzungen angepasst werden. Zudem steigt die Nachfrage nach Beton, während fossile Brennstoffreserven und die Verfügbarkeit von mineralischen Rohstoffen abnehmen. Hinzu kommt, dass bei der Betonherstellung neue mineralogi-sche Phasen entstehen, was ein echtes Recycling erschwert. Die Implementierung kreislaufkonformer Strategien wie der Verlängerung der Nutzungsphase ist ein wichtiger Hebel, um Umweltwirkungen im Bauwesen zu reduzieren, und erfordert die ganzheitliche Betrachtung des Bauwerks. Besonders großes Potenzial liefern hier die digital vernetzte und modellba-sierte Planung sowie die darauf aufbauende robotergestützte Fertigung der Bauteile, mit der sich leicht lösbare Verbindun-gen, einfach rückbaubare, multifunktionale, flexible sowie bzgl. Dauerhaftigkeit optimierte Strukturen ökologisch und kosten-effizient generieren lassen. Technisch wären bereits viele Pro-jekte in der Praxis umsetzbar, allerdings müssen hierzu die rechtlichen Rahmenbedingungen verbessert und bürokratische Hürden abgebaut werden. Dieser Beitrag hat das Ziel, das Be-wusstsein für den nötigen Wechsel von der Linear- zur Kreis-laufwirtschaft im Betonbau und den korrespondierenden Daten zu erhöhen und dem Planer einfache Grundsätze für den Ent-wurf, die Ausschreibung und Umsetzung mitzugeben, um jetzt schon einen wichtigen Beitrag zum verantwortungsvollen Um-gang mit immer knapper werdenden Ressourcen zu leisten. KW - zirkuläres Bauen KW - RC-Beton KW - Kreislaufwirtschaft KW - kreislaufgerecht Bauen Y1 - 2023 U6 - https://doi.org/DOI: 10.1002/best.202200118 VL - 118 PB - Ernst & Sohn, a Wiley Brand CY - Berlin ER - TY - CHAP A1 - Gömmel, Roland A1 - Spirkl, Florian A1 - Neidhart, Thomas T1 - Nachweis der Gesamtstandsicherheit geotechnischer Strukturen mit verschiedenartigen pfahlartigen Traggliedern T2 - Bauen in weichen Böden: Besondere Herausforderungen in Planung und Ausführung; Beiträge zum 36. Christian Veder Kolloquium : 28. und 29. Juni 2022, Graz T2 - NAWI Graz Geocenter ; Heft 11 Y1 - 2022 SP - 165 EP - 181 PB - Technische Universität Graz CY - Graz ER - TY - GEN A1 - Gömmel, Roland T1 - Ein Ansatz zum Nachweis der Gesamtstandsicherheit mit pfahlartigen Traggliedern T2 - 37. Baugrundtagung - Spezialsitzung "Forum für junge Geotechnikingenieure und -Ingenieurinnen", 5. – 8. Oktober 2022, Wiesbaden, Germany Y1 - 2022 ER - TY - GEN A1 - Schermer, Detleff ED - Schermer, Detleff ED - Brehm, Eric T1 - Mauerwerk-Kalender 2023 BT - Schwerpunkte: Instandsetzung; Erdbeben; Lehmbau Y1 - 2023 SN - 978-3-433-03374-6 PB - Ernst & Sohn GmbH CY - Berlin ET - 48. Jahrgang ER - TY - CHAP A1 - Haynack, Alexander A1 - Schneider, Alexander A1 - Timothy, Jithender J. A1 - Kränkel, Thomas A1 - Gehlen, Christoph A1 - Thiel, Charlotte T1 - Effect of Chloride Concentration on the Freeze-Thaw Resistance of Concrete T2 - International RILEM Conference on Synergising expertise towards sustainability and robustness of CBMs and concrete structures, SynerCrete’23 - Volume 2 N2 - Performance test methods intend to provide a fast, accurate and precise determination of a particular building material property and thus determine the associated material performance. In concrete, various performance tests are used to classify existing or to approve new materials, to compare concrete compositions or to determine causes of damage in existing structures. The challenge of such test methods is to accelerate natural (very slow) mechanisms to determine the material performance precisely within a short time. However, the attack on the material must not be unrealistically intensive, but must represent reality, just in fast motion. The performance tests used to demonstrate the freeze-thaw resistance of concrete employ a 3% NaCl solution, with literature data ranging from 1% to 10% showing that low concentrations can result in higher surface scaling. In this paper, mortar and concrete specimens are tested at 0, 1, 3, 6, and 9% NaCl solution following the CDF procedure (DIN CEN/TS 12390-9:2017-05). The results are discussed against the background of the existing literature and show that the damage is critically dependent on the pore system and thus also on the effect of the micro-ice lens pump. With increasing freeze-thaw exposition, the pessimum in the external damage shifts towards a de-icing salt concentration of 6%. Furthermore, a novel test methodology based on 3D-laserscanning is presented to determine scaling accurately by eliminating side effects that are typically present in current standards. KW - Concrete KW - durability KW - freeze-thaw resistance KW - chloride concentration KW - 3D laser scanning Y1 - 2023 U6 - https://doi.org/10.1007/978-3-031-33187-9_83 SP - 911 EP - 921 PB - Springer CY - Cham ER - TY - CHAP A1 - Grimm, Benedikt A1 - Münchmeyer, Sebastian A1 - Kränkel, Thomas A1 - Gehlen, Christoph A1 - Thiel, Charlotte T1 - Developing a New Rapid, Relevant, and Reliable (R3) Method for Accelerated Measurement of Carbonation Progress at Gas Overpressure T2 - International RILEM Conference on Synergising expertise towards sustainability and robustness of CBMs and concrete structures, SynerCrete’23 - Volume 1 N2 - The determination of durability-relevant material resistances of concrete is of great importance. They serve as input to engineering models to predict the durability of structures under real environmental conditions. The natural resistances have to be determined in time-consuming experiments, since the processes in nature are very slow. This is particularly important for new materials where long-term experience is not yet available. Thus, accelerated testing is required. Only that way new materials can be evaluated regarding their durability and subsequently be used in practical applications. For carbonation, a new R3 accelerated test method is presented in this contribution. An automated carbonation pressure chamber was developed. It consists of a pressure vessel, automated in such a way that it can apply gas overpressure of various intensities up to 8 bar to mortar and concrete samples. Simultaneously, it can control and regulate the ambient CO2 concentration from 0 to 99.5% in a fully automated and continuously variable procedure. Experiments were carried out with varying combinations of gas overpressure at CO2 concentrations of 3 vol.-% to achieve the most time-efficient carbonation of mortars and concretes. Mortars with different material compositions were used to evaluate the general suitability of the test procedure with the developed equipment. The automated carbonation pressure chamber enables reliable carbonation testing with a total duration under accelerated conditions of only 7 days. KW - Carbonation KW - concrete KW - durability KW - accelerated testing KW - gas overpressure Y1 - 2023 U6 - https://doi.org/10.1007/978-3-031-33211-1_30 SP - 336 EP - 346 PB - Springer ER - TY - CHAP A1 - Grewolls, Kathrin A1 - Grewolls, Gerald ED - Abbaspour, Amir T1 - Vorteile von BIM für die Brand- und Evakuierungssimulation T2 - Digitales Bauen mit BIM: Use Case Management im Hochbau N2 - BIM – das ist die Zukunft des Bauwesens. Mit BIM werden neue Grade der Digitalisierung und des vernetzten Arbeitens, des dynamischen Workflows ermöglicht. Doch wie sieht BIM in der Praxis aus? Das vorliegende Buch geht dieser Frage anhand eines praktischen Beispiels nach. Ein virtuelles Bauprojekt wird in jeder Lebensphase mit BIM realisiert. „Digitales Bauen mit BIM“ führt den Leser durch die verschiedenen Abschnitte, von der Planung über die konkrete Ausführung bis letztlich zum Betreiben des Gebäudes. Dabei versteht sich das Buch als Praxisleitfaden: Es setzt auf möglichst gut verständlich aufbereitetes Wissen. Der Band bietet Grundlageninformationen und führt in die Methode BIM als solche ein, die ihren festen Platz im Prozessmanagement bereits eingenommen hat. Es behandelt aber auch und vor allem die ganz konkreten Abschnitte und Schritte und die zur Anwendung kommenden Techniken, die in einem realen Bauprojekt mit BIM bewältigt werden können. Viele Grafiken sorgen für ein hohes Maß an Anschaulichkeit und unterstreichen die Praxisbezogenheit des Werks. Dabei kommen verschiedene Experten zu Wort und geben weitere hilfreiche Praxistipps. Wer eine Schritt-für-Schritt-Anleitung für BIM-Projekte sucht, der ist mit „Digitales Bauen mit BIM“ gut beraten. Y1 - 2021 UR - https://www.researchgate.net/publication/354606622_Vorteile_von_BIM_fur_die_Brand-_und_Evakuierungssimulation SN - 978-3-410-30243-8 SP - 69 EP - 73 PB - Beuth ER - TY - CHAP A1 - Reichwald, Marc-Philip T1 - Haus B Ellerbek T2 - Architekturführer Deutschland 2019 N2 - Vom Umlauftank zum Brauhaus und weiter in die Oper: Der Architekturführer Deutschland 2019 stellt 97 aktuelle Bauwerke vor. Recherchiert wurden die Bauten vom Deutschen Architekturmuseum (DAM). Außerdem waren die Architektenkammern der meisten Bundesländer mit Vorschlägen an der Auswahl beteiligt. Ein besonderes Augenmerk galt den Planungen junger, noch im Aufbau befindlicher Büros. Die Reise, zu der der Architekturführer inspirieren möchte, beginnt im Norden Deutschlands, führt im Uhrzeigersinn über den Osten nach Süden und endet schließlich im Westen. Auf der Route liegen Metropolen, Groß- und Kleinstädte, auch Dörfer abseits der vertrauten Strecken sind dabei. Was dort zu finden ist, bietet eine große Bandbreite, sowohl was die Größenordnung der Bauten als auch ihre Entstehungsgeschichte und Nutzung angeht. Ob Museum, Theater, Villa, Wohnhaus, Studentenwohnheim, Umspannwerk, Sport- oder Bildungseinrichtung, Bibliothek, Verwaltungsbau, Sanierung, Umbau oder städtebauliches Ensemble – alle Gebäude haben gemeinsam, dass sie bemerkenswerte Beispiele der aktuellen Baukultur in Deutschland sind. Y1 - 2020 UR - https://dom-publishers.com/products/deutschland-2019 SP - 16 EP - 17 PB - DOM publishers ER - TY - CHAP A1 - Gömmel, Roland T1 - Empfehlungen des Arbeitskreises Stabilisierungssäulen - Aktueller Stand T2 - 16. Erdbaufachtagung 2020 "Sicherungen und Stabilisierungen im Erd- und Grundbau", 05.03.- 06.03.2020, Leipzig N2 - Überblick über Stabilisierungssäulen-Typen; Bemessungsschema von Stabilisierungssäulen; Anwendungsbeispiel "Verkehrsdamm auf Stabilisierungssäulen"; Nachweis der Gesamtstandsicherheit (Böschungsbruch); Nachweis der inneren Tragfähigkeit der StS Y1 - 2020 UR - https://www.researchgate.net/publication/349519653_Empfehlungen_des_Arbeitskreises_Stabilisierungssaulen_-_Aktueller_Stand ER - TY - GEN ED - Greim, Markus ED - Kusterle, Wolfgang ED - Teubert, Oliver T1 - Rheologische Messungen an Baustoffen 2020 : Tagungsband zum 29. Workshop und Kolloquium, 11. und 12. März an der OTH Regensburg T2 - Rheological measurement of building materials 2020 : proceedings of the 29th conferences and laboratory workshops, 11th and 12th March at OTH Regensburg Y1 - 2020 SN - 978-3-347-02887-6 PB - tredition CY - Hamburg ER - TY - CHAP A1 - Zilch, Konrad A1 - Finckh, Wolfgang T1 - Erweiterung der Verbundmodelle auf eingeschlitzte CFK-Bewehrung T2 - Befestigungstechnik, Bewehrungstechnik und … Y1 - 2012 SN - 978-3-8982-1208-3 PB - ibidem CY - Stuttgart ER - TY - JOUR A1 - Chow, Rosan A1 - Jonas, Wolfgang A1 - Romero-Tejedor, Felicidad T1 - Design Research in Germany? JF - Design Issues Y1 - 2015 U6 - https://doi.org/10.1162/DESI_e_00303 VL - 31 IS - 1 SP - 3 EP - 6 PB - MIT Press ER - TY - CHAP A1 - Albalkhy, Wassim A1 - Hernandez Valera, Elias A1 - Karmaoui, Dorra A1 - Lafhaj, Zoubeir A1 - Linner, Thomas A1 - Ayadi, Syrine A1 - Zerrari, Reda A1 - Boutabba, Assia ED - Gonzalez-Moret, Vicente ED - Zhang, Jiansong ED - García de Soto, Borja ED - Brilakis, Ioannis T1 - Motives and Barriers for Offsite and Onsite Construction 3D Printing T2 - Proceedings of the 41st International Symposium on Automation and Robotics in Construction. - Lille, France. - 6/3/2024 - 6/5/2024 N2 - This study aims to compare between onsite and offsite construction 3D printing (C3DP). For this purpose, the Systematic Literature Review approach (SLR) was employed. The review which was based on studying 48 sources identified six categories to classify the motives and barriers for the two C3DP techniques; cost, transportation, design flexibility, workers and materials, production process, and environmental considerations. The literature identified the cost as the main factor that influences the choice between the two techniques. The presented list of motives and barriers is helpful to support decision-making in C3DP projects. KW - Additive Manufacturing KW - 3D Printing KW - Construction Management KW - Modular Construction KW - Offsite Construction KW - Literature Review Y1 - 2024 U6 - https://doi.org/10.22260/ISARC2024/0154 SN - 2413-5844 SP - 1190 EP - 1197 PB - International Association for Automation and Robotics in Construction (IAARC) ER - TY - GEN A1 - Spirkl, Florian A1 - Neidhart, Thomas T1 - Vergleichende CO2-Bilanzierung von Rohrgrabenverfüllungen mit Sand und ZFSV KW - CO2-Bilanzierung KW - Rohrgrabenverfüllung KW - Bettungsmaterial KW - ZFSV Y1 - 2023 VL - 2023 ER - TY - CHAP A1 - Höller, Christoph A1 - Blödt, Adrian ED - Rolfes, Raimund ED - Peissig, Jürgen T1 - Praxisnahe, projektbasierte Lehre in der Bauakustik mit Hilfe von realen Bauobjekten T2 - Tagungsband - Proceedings "Fortschritte der Akustik - DAGA 2024" : DAGA 2024 - 50. Jahrestagung für Akustik, 18.-21. März 2024, Hannover N2 - Im Rahmen des Masterstudiengangs Bauingenieurwesen können Studierende der Ostbayerischen Technische Hochschule Regensburg einen Wahlpflichtkurs zu fortgeschrittener Bauphysik belegen, um ihr Wissen über Wärme- und Feuchteverhalten, Energieeffizienz von Gebäuden sowie Raum- und Bauakustik zu vertiefen. Im letzten Jahr wurde dieser Kurs von einer klassischen Frontalvorlesung auf eine interaktivere und praxisnähere Unterrichtsform umgestellt. Im Fokus stehen nun Gruppenarbeiten und projektbasiertes Lernen mit realen Bauprojekten. Für den Bauakustik-Teil wurde ein kürzlich errichtetes Mehrfamilienhaus in Holzbauweise als Beispielobjekt verwendet. Die Studierenden wurden in fünf Gruppen eingeteilt, die sich jeweils mit einem Aspekt des akustischen Planungsprozesses befassten: Luft- und Trittschalldämmung, Raumakustik, Fassadenschalldämmung, Geräusche von gebäudetechnischen Anlagen sowie Immissionsschutz. Jede Gruppenaufgabe war so konzipiert, dass sie Berechnungen und messtechnische Aspekte enthielt. Die Studierenden wurden durch ausgewählte Vorlesungen, Kleingruppenbetreuung und einen abschließenden "Messtag" unterstützt. Am Ende des Semesters präsentierte jede Gruppe die für die Projektaufgaben verwendeten Methoden und die Ergebnisse. Die ersten Rückmeldungen der Studierenden sind positiv, das Engagement hat spürbar zugenommen. Der praxisorientierte Ansatz impliziert, dass die Studierenden mit realen Herausforderungen konfrontiert werden, wie beispielsweise unbekannten oder fehlerhaften Daten, anspruchsvollen Messgeräten oder komplexen Vorschriften. Sie lernen, wie sie mit diesen Herausforderungen umgehen können. In diesem Beitrag werden Einzelheiten des Projekts und die bisher gesammelten Erfahrungen vorgestellt. Y1 - 2024 UR - https://pub.dega-akustik.de/DAGA_2024/konferenz?article=321 UR - https://pub.dega-akustik.de/DAGA_2024/ SN - 978-3-939296-22-5 SP - 826 EP - 828 ER - TY - CHAP A1 - Höller, Christoph A1 - Müller-Trapet, Markus T1 - Measured and predicted sound transmission through a laboratory concrete floor T2 - 53rd International Congress and Exposition on Noise Control Engineering (Inter-Noise 2024), 25.-29. August 2024, Nantes France Y1 - 2024 ER - TY - CHAP A1 - Rieger, Anna A1 - Däuble, Lukas A1 - Scheck, Jochen A1 - Zeitler, Berndt A1 - Höller, Christoph T1 - Experimental study on using transient excitation signals in the prediction of sound pressure levels from building services according to EN 12354-5 and EN 15657 T2 - Proceedings of DAS|DAGA 2025, 51st Annual Meeting on Acoustics, March 17-20, 2025, Copenhagen N2 - EN 12354-5:2023 describes a calculation procedure to predict the sound pressure levels from building service equipment. The procedure uses the blocked force of the source as input data. This quantity can be determined using the reception plate method according to EN 15657:2017. The methods have been developed and validated for stationary excitation signals (Leq). Real structure-borne sound sources often have time-varying excitation signals. In addition, the requirements for sound insulation against noise from building service equipment in Germany (DIN 4109) are given in terms of the maximum, time-weighted sound pressure level (LFmax). This contribution investigates the suitability of the methods described in EN 12354-5 and EN 15657 for structure-borne sound sources with transient excitation signals. A measurement series with time signals ranging from stationary to highly transient was conducted in a building-like laboratory. The reverberation time of the receiving room was adjusted to three different values. The calculations were processed using Leq values, LFmax values and short-time Leq values. The results show the uncertainties that can arise in the prediction of signals with varying transient characteristics compared to stationary excitation signals. Y1 - 2025 SN - 978-3-939296-23-2 U6 - https://doi.org/10.71568/dasdaga2025.526 SP - 372 EP - 375 CY - Berlin ER - TY - GEN A1 - Appelt, Andreas T1 - BIM - Masterplan in der Lehre BT - Der weite Weg von der Klothoide zum digitalen Zwilling T2 - VSVI-Bayern: Seminar BIM im Verkehrswegebau, 20.05.2025, Unterschleißheim N2 - Neben der Vermittlung von grundlegenden Kenntnissen, Fertigkeiten und Kompetenzen im Bereich der Verkehrswegeplanung sind künftig auch die Grundlagen des modellbasierten Planens und die Anwendung in den entsprechenden Softwarelösungen zu vermitteln. Um diesem Umstand gerecht zu werden, wurden sowohl der Bachelor- als auch der Masterstudiengang Bauingenieurwesen an der OTH Regensburg neu strukturiert und die Themen Digitalisierung und Nachhaltigkeit im Rahmen von neu geschaffenen Schwerpunkten vertieft und in Modulen zu digitalen Kompetenzen über den gesamten Studienverlauf als Querschnittsthema implementiert. Um vorlesungsbegeleitend den Einsatz von digitalen Methoden zu fördern, wurde im Fachgebiet Straßenplanung / Straßenbau in den letzten Jahren ein durchgängiges Planungsprojekt einer fiktiven Ortsumfahrung entwickelt. Basierend auf realen Grundlagendaten (DGM, Rasterbilder, Achsdaten etc.) wurde die Reallaborsituation „Orstumfahrung Presseck“ aufgebaut. Die Herausforderung, um die Ansätze des BIM-Masterplans auch in der Lehre zu integrieren liegt in der Vermittlung einer neuen Arbeitsmethodik bei begrenztem zeitlichem Umfang im Rahmen der stark reglementierten Bachelorstudiengänge. Der Ansatz, eines durchgängigen Projektes das mittels kurzer Lehrvideos und Anleitungen vorlesungsbegleitend zur Verfügung gestellt wird, hat sich bewährt. Durch die konkrete Anwendung modellbasierter Methoden im Sinne einer „Technologie zum Anfassen“ wird ein dauerhafter Lernerfolg sichergestellt. Voraussetzung zu diesem Vorgehen ist die stetige Aktualisierung der Unterlagen und die zuverlässige Verfügbarkeit von Softwarelösungen, was nur mit entsprechender personeller Ausstattung möglich ist. KW - BIM KW - Verkehrswegebau Y1 - 2025 ER - TY - BOOK A1 - Finckh, Wolfgang T1 - Stahlbetonkonstruktion 2 BT - Von der Bauteilberechnung über die Bemessung zur Bauwerksplanung N2 - Aufbauend auf dem ersten Teil „Stahlbetonkonstruktion“ werden in diesem Teil erweiterte Grundlagen der Stahlbetonberechnung erläutert. Neben den Torsionsnachweisen, dem genaueren Verfahren zur Durchbiegeberechnung und den Schnittgrößenumlagerungen werden vor allem besonders häufig vorkommende Stahlbetonbauteile behandelt. Zu diesen Bauteilen zählen Aussteifungssysteme, Bodenplatten, Fundamente, liniengelagerte Platten sowie Elementdecken. Hierbei werden bei diesen Bauteilen, welche nahezu in jedem Bauwerk vorkommen, sowohl die Ermittlung der Schnittgrößen wie auch die Bemessung und konstruktive Durchbildung erklärt. Zusätzlich wird in diesem Lehrbuch auch die Bemessung des Werkstoffes Stahlfaserbeton, welcher insbesondere bei Bodenplatten im Industriebau verwendet wird, erläutert. Die im Lehrbuch vorgestellten theoretischen Grundlagen werden anhand zahlreicher Abbildungen verdeutlicht. In jedem Kapitel sind zum besseren Verständnis umfangreiche Bemessungsbeispiele mit Praxisbezug enthalten. Nach der erfolgreichen Lektüre des ersten Bandes der Reihe „Stahlbetonkonstruktion“ wird in diesem zweiten Band das Wissen gefestigt und stark erweitert. Dies ermöglicht dem Lesenden einen sicheren Umgang mit dem Werkstoff Stahlbeton. KW - Stahlbetonkonstruktion KW - Stahlbetonbau KW - Torsion KW - Aussteifung KW - Fundamente KW - Verbundfugen KW - Torsionsbemessung KW - Platten KW - Aussteifung von Gebäuden KW - Bodenplatten KW - Durchbiegung KW - Schnittgrößenumlagerung KW - Stahlfaserbeton Y1 - 2024 SN - 9783658449605 U6 - https://doi.org/10.1007/978-3-658-44961-2 SN - 2524-8693 PB - Springer Fachmedien Wiesbaden CY - Wiesbaden ER - TY - BOOK A1 - Finckh, Wolfgang T1 - Verstärken von Betonbauteilen BT - Tragwerksplanung im Bestand N2 - Dieses Lehrbuch widmet sich dem Bauen im Bestand mit Betonbauteilen und den dabei häufig vorkommenden Verstärkungsmaßnahmen. Dazu wird zunächst das Sicherheitskonzept bestehender Bauteile erläutert. Darauf aufbauend wird die Analyse der Bestandsmaterialien und das Vorgehen bei einer Analyse des Tragverhaltens des Bestandsbauteils bzw. einer Nachrechnung behandelt. Die weiteren Kapitel des Buches beschäftigen sich mit dem Verstärken der bestehenden Betonbauteile. Hierbei werden alle gängigen Verstärkungen im Stahlbetonbau, wie das Verstärken mit geklebter Bewehrung, Carbonbeton, Betonschrauben und das Verstärken mittels Auf- und Spritzbeton, erklärt. Dabei werden bei allen Verfahren die Gemeinsamkeiten, die Unterschiede sowie die sinnvollsten Anwendungsgebiete herausgearbeitet. Die theoretischen Grundlagen werden anhand zahlreicher Abbildungen verdeutlicht. In jedem Kapitel sind zum besseren Verständnis umfangreiche Bemessungsbeispiele mit Praxisbezug enthalten. Die erfolgreiche Lektüre dieses Buches ermöglicht dem Lesenden, sich den tragwerksplanerischen Aufgaben von bestehenden Betonbauwerken zu stellen und Verstärkungsmaßnahmen zu berechnen. KW - Bestandsbeton KW - Bauen im Bestand KW - Bewertung KW - Verstärken KW - CFK-Lamellen KW - Carbonbeton KW - Sicherheitskonzept KW - Spritzbeton KW - Aufbeton KW - Sützenverstärkung KW - Schubverbinder KW - Betonschrauben KW - Biegeverstärkung KW - Querkraftverstärkung Y1 - 2024 SN - 9783658458560 U6 - https://doi.org/10.1007/978-3-658-45857-7 SN - 2524-8693 PB - Springer Fachmedien Wiesbaden CY - Wiesbaden ER - TY - GEN A1 - Obergrießer, Mathias T1 - Digitale Kompetenzen im Bauwesen: BIM, Lean und KI BT - Werkzeugem für den modernen Bauingenieur T2 - VSVI-Bayern: Seminar BIM im Verkehrswegebau, 20.05.2025, Unterschleißheim KW - BIM KW - Bauingenieur KW - Berufliche Qualifikation KW - Digitale Kompetenz Y1 - 2025 ER - TY - CHAP A1 - Höller, Christoph A1 - Parzinger, Michael A1 - Schanda, Ulrich T1 - The Sound Reduction Index of Homogeneous Building Elements according to Annex B of ISO 12354-1 – Discussion and Proposal for Changes T2 - Proceedings of DAS|DAGA 2025, 51st Annual Meeting on Acoustics, March 17-20, 2025, Copenhagen N2 - Annex B of ISO 12354-1:2017 describes a procedure for the calculation of the frequency-dependent sound reduction index of homogeneous building elements such as concrete floors or masonry walls. With the introduction of EN 12354-5:2023 and an upcoming change in DIN 4109-2 regarding the calculation of sound levels due to service equipment, it is anticipated that the practical relevance and usage of Annex B will increase in the future. For this reason, the procedure has recently been investigated by an informal working group of academics from several German universities. It was found that Annex B contains some errors, missing references, and ambiguities in the calculation procedure. Based on these discussions, some changes were proposed to the committee responsible for the standard (CEN/TC 126/WG 2). While the general calculation procedure was left unchanged, the proposed changes focus on the influence of shear deformation, the radiation factor for free waves, a moving average function to limit the variability in the coincidence region, and the calculation examples provided in the annex. This contribution provides an overview of the procedure, presents some background information on the underlying theory, and discusses the proposed changes. Y1 - 2025 SN - 978-3-939296-23-2 U6 - https://doi.org/10.71568/dasdaga2025.147 SP - 312 EP - 315 CY - Berlin ER - TY - CHAP A1 - Bäumler, Georg A1 - Höller, Christoph T1 - Modifying a Wall Transmission Suite to Measure Diffuse Field Sound Absorption Coefficients – A Case Study T2 - Proceedings of DAS|DAGA 2025, 51st Annual Meeting on Acoustics, March 17-20, 2025, Copenhagen N2 - The determination of the diffuse field sound absorption coefficient is carried out in reverberation chambers that comply with the requirements of the corresponding standard, ISO 354. No such chamber exists at OTH Regensburg University of Applied Sciences, but a new wall transmission suite according to ISO 10140 is available. This student project investigates the possibility of using the wall transmission suite to measure absorption coefficients for teaching and research purposes.To assess the suitability of the room, the diffusivity was evaluated using the standard deviation of both the reverberation times and the equivalent continuous sound pressure levels at multiple positions within the room. These results, along with a comparison with expected values for a diffuse sound field, guided the design of reflector panels to introduce diffuse reflections. The implementation features acrylic (PMMA) as the primary material in combination with dense viscoelastic damping sheets, resulting in a low vibration solution. Suspended from the ceiling of the chamber, these improved the diffusivity of the sound field, making the room suitable for absorption measurements across a broad frequency range. Y1 - 2025 SN - 978-3-939296-23-2 U6 - https://doi.org/10.71568/dasdaga2025.291 SP - 1191 EP - 1194 CY - Berlin ER - TY - CHAP A1 - Neugart, Sandrine A1 - Bresinsky, Markus T1 - Situational Awareness of Critical Infrastructures at the Local Level – Fostering Resilience Through Accessible Method-based Analysis T2 - Critical Infrastructure Protection and Resilience Europe (CIPRE) 2022, Bukarest (Rumänien) N2 - Critical infrastructure protection and resilience start at the local level. While laws and regulations provide the necessary frameworks within which the various stakeholders act, little effort has been made to bring together local and regional actors in order to facilitate a shared understanding of critical infrastructure (CI) risks and security. Such a common analysis, however, is essential to identifying local vulnerabilities, understanding their key drivers as well as their interdependencies, and ultimately, to adapting strategies which overall contribute to improving the security of KRITIS in the region. This paper outlines a best practice approach to analyzing risks associated with KRITIS and their interdependencies at the local level. It addresses frequently overlooked issues such as bringing together different stakeholders whilst making the discussion accessible and comprehensible to everyone. It also deals with analytic questions regarding the development of a methods-based approach to situational awareness, ranging from defining appropriate categories of thinking to mitigating the impact of potential biases influencing the different thought processes. In order to advance these ideas, the analysis is based on thorough research as well as first-hand experience from running local workshops for stakeholders of KRITIS. Overall, this paper seeks to develop a format which encourages action among KRITIS stakeholders at the local level. It approaches critical infrastructures from a system thinking perspective, whilst linking intellectual accessibility with the rigor of academic analysis. Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-55676 ER - TY - BOOK A1 - Finckh, Wolfgang T1 - Mit Stabwerkmodellen zur Bewehrungsführung: Detailnachweise im Stahlbetonbau N2 - Aufbauend auf den Grundlagen des Stahlbetonbaus wird in diesem Lehrbuch das Konzept der Bemessung von Stahlbetonkonstruktionen mittels Stabwerkmodellen erläutert. Dieses Bemessungskonzept wird insbesondere im Bereich der Detailnachweise und bei gedrungenen Tragwerken im Stahlbetonbau benötigt. Neben der generellen Modellbildung und Nachweismethodik werden auch die üblichen Modelle und Nachweise für häufig vorkommende Details vorgestellt. Hierbei werden insbesondere Krafteinleitungsbereiche, Konsolen, ausgeklinkte Auflager, Rahmenknoten, Querschnittssprünge, Trägeröffnungen und Wandartige Träger detailliert behandelt. Die im Lehrbuch vorgestellten theoretische Grundlagen werden anhand zahlreicher Abbildungen erläuterten. In jedem Kapitel sind zum besseren Verständnis umfangreiche Bemessungsbeispiele mit Praxisbezug enthalten. KW - Abgesetzte Auflager KW - Auflager KW - Druckkräfte KW - Konsolen KW - Stabkräfte KW - Stabwerk KW - Stabwerksmodelle KW - Stegöffnungen KW - Wandartige Träger KW - Zugkräfte Y1 - 2023 SN - 978-3-658-40881-7 U6 - https://doi.org/10.1007/978-3-658-40882-4 PB - Springer Fachmedien CY - Wiesbaden ER - TY - GEN ED - Rickert, Alexa ED - Schlosser, Sophie T1 - Gestaltung, Funktion und Bedeutung antiker Treppenanlagen BT - Multiperspektivische Analyse einer transkulturellen Konstante N2 - Die vorliegende Publikation dokumentiert die Ergebnisse des Symposiums "Gestaltung, Funktion und Bedeutung antiker Treppenanlagen. Multiperspektivische Analyse einer transkulturellen Konstante", welches erstmals die Treppe und die Anfänge ihrer Reflexion in das Zentrum einer internationalen Fachtagung stellte. Diese fand im Rahmen der Symposienwochen der VolkswagenStiftung vom 20.–22. Oktober 2021 in Schloss Herrenhausen (Hannover) sowie im virtuellen Raum statt. Der Sammelband nähert sich einer kulturimmanenten wie transkulturellen Perspektive auf die Treppe an, indem Quellen unterschiedlicher Art und aus mehreren antiken Kulturräumen (Alter Orient, Ägypten, griechische Welt, Römisches Reich und Spätantike) untersucht werden. Das Studium des bauhistorischen Befundes wird so mit der Analyse von relevantem Bild- und Textmaterial kombiniert. Die jeweiligen Quellen zur Gestaltung, Funktion und Bedeutung der Treppenanlagen geben durch diese erweiterte Betrachtung Aufschluss darüber, welche Rolle jene für die Menschen in der Antike spielten. N2 - This publication documents the results of the symposium "Design, Function and Meaning of Ancient Staircases. Multi-perspective Analysis of a Transcultural Constant," which placed the staircase and the beginnings of its perception for the first time at the centre of an international conference. It took place as part of the Volkswagen Foundation's symposium weeks from October 20-22, 2021, at Herrenhausen Palace (Hanover), as well as in virtual space. The volume approaches a cultural-immanent as well as transcultural perspective on the staircase by examining sources of different kinds and from several cultural areas (Ancient Near East, Egypt, the Greek world, the Roman Empire, and Late Antiquity). The study of the architectural evidence is thus combined with the analysis of relevant pictorial and textual material. The respective sources on the design, function and meaning of ancient staircases provide information on their role for the people in antiquity. KW - Antike KW - Architektur KW - Treppe KW - Stufe KW - Scalalogie Y1 - 2022 SN - 978-3-96327-215-8 U6 - https://doi.org/10.17879/43059664331 N1 - Zugleich Print- und OA-Version PB - Zaphon CY - Münster ER - TY - JOUR A1 - Kurapkat, Dietmar A1 - Mollenhauer, Anne A1 - Issa, Mayssoun A1 - Topal, Tutku A1 - Mai, Philipp T1 - Digital Monument Preservation in 3D. The virtual bazaar of Aleppo (Suq al-Madina) as a discussion tool for the preservation of historical monuments JF - Forum für digitale Archäologie und Infrastruktur (FDAI) N2 - Die Nutzung virtueller Modelle zur Visualisierung historischer Gebäude stellt seit vielen Jahren einen Standard in der Vermittlung von Architekturgeschichte dar. Darüber hinaus besitzen diese Modelle ein großes Potenzial, um als Werkzeuge in Arbeitsprozessen von historischer ­Bauforschung und praktischer Denkmalpflege genutzt zu wer­den. Sie können beispielsweise dazu dienen, die Plau­sibilität von Rekonstruktionsvorschlägen früh­zeitig im 3D-Raum zu überprüfen und mögliche Maßnahmen zwischen Wissenschaftler:innen, Poli­tiker:innen, Bürger:innen und anderen Stake­holdern zu kommunizieren und diskutieren. In einem Workshop am Architekturreferat des DAI in Berlin wurde das virtuelle Modell des Basars von Aleppo als Fallstudie zu den genannten Fragen präsentiert. KW - 3D-Dokumentation KW - Aleppo, Basar KW - Denkmalpflege KW - Digital Humanities KW - Open Access KW - Online-Publikation KW - Spezielle Anwenderprogramme KW - Syrien KW - Weltkulturerbe Y1 - 2023 U6 - https://doi.org/10.34780/4vcd-2sac SN - 2748-8861 PB - Deutsches Archäologisches Institut ER - TY - CHAP A1 - Schreyer, Marcus A1 - Wedding, Tim ED - Przybylo, Jakob T1 - Unternehmensgruppe Max Bögl T2 - BIM in der Anwendung: Beispiele und Referenzen KW - Building Information Modeling Y1 - 2017 SN - 978-3-410-26815-4 SP - 109 EP - 119 PB - Beuth CY - Berlin ER - TY - CHAP A1 - Lerch, Maximilian A1 - Neidhart, Thomas ED - Stahlmann, Joachim ED - Hinzmann, Nils ED - Stein, Philipp ED - Gattermann, Jörg T1 - Messtechnische Ausrüstung von Betonstopfsäulen bei Probebelastungen T2 - Messen in der Geotechnik 2020, Fachseminar am 20./21. Februar 2020 in Braunschweig N2 - Die Ausrüstung vollverdrängter pfahlartiger Elemente – bei Keller Betonstopfsäulen (BSS) genannt – mit Messtechnik ist während der Herstellung wegen des Einsatzes schwerer Rütteltechnik und fehlender Stahlbewehrung praktisch unmöglich. In Zusammenarbeit von Keller und der Fakultät Bauingenieurwesen der Ostbayerischen Technischen Hochschule Regensburg wurde ein Verfahren zur nachträglichen Installation der Messtechnik entwickelt, das axiale Dehnungsmessungen in den BSS während der Probebelastungen ermöglicht. Die Ausrüstung besteht u. a. aus faseroptischen Komponenten. Das Verfahren wurde in situ an 1:1 Versuchen auf einem Testfeld sowohl bei statischen als auch dynamischen Probebelastungen umgesetzt. Es wurden zwei unterschiedliche Messtechniken gemäß der jeweiligen Art der Probebelastungen eingesetzt. Daneben wurden robuste Piezometer in den Boden eingebracht, die kontinuierliche Porenwasserdruckmessungen nahe der Säulen ermöglichen. Zweck der verwendeten Messtechnik war es vor allem belastbarere Ergebnisse für effektive Bemessungen der Stopfsäulen zu liefern. KW - Acceleration KW - Ausrüstung KW - Baugrund KW - Bauverfahren KW - Bayern KW - Bemessung KW - Beschleunigung KW - Bodenaufbau KW - Bohrloch KW - Bohrpfahl KW - bore pile KW - bore-hole KW - Bundesrepublik KW - compacted column foundation KW - construction method KW - cycle KW - Dehnungsmessung KW - design KW - Deutschland KW - driving KW - driving rod KW - Drucksondierung KW - equation KW - equipment KW - Extensometer KW - Faseroptik KW - Faserverbund KW - fiber optic KW - frequency range KW - Frequenzbereich KW - Gleichung KW - ground KW - grouting technology KW - in-situ concrete pile KW - in-situ test KW - In-Situ-Versuch KW - measuring KW - Messtechnik KW - normal force KW - Normalkraft KW - Ortbetonpfahl KW - penetration testing KW - Piezometer KW - pore (water) pressure KW - Porenwasserdruck KW - preliminary test KW - Probebelastung KW - Rammsonde KW - Rammung KW - Regensburg KW - Sensor KW - soil structure KW - Stopfsäule KW - strain measurement KW - test loading KW - Verpresstechnik KW - Vorversuch KW - Zyklus Y1 - 2020 SN - 978-3-948141-02-8 U6 - https://doi.org/10.24355/dbbs.084-201912181435-0 VL - 110 SP - 275 EP - 296 PB - Selbstverlag CY - Braunschweig ER - TY - BOOK A1 - Finckh, Wolfgang T1 - Stahlbetonkonstruktion BT - von der Bemessung über die Konstruktionsregeln zum Bewehrungsplan N2 - Die Grundlagen der Berechnung von Stahlbetonbauteilen werden in diesem Lehrbuch anhand der mechanischen Beziehungen erläutert. Ausgehend von den Nachweisen für Biegung und Querkraft werden auch die Berechnungen für die im Hochbau üblichen Stahlbetonbauteile, wie Balken, Platten, Stützen und Flachdecken erarbeitet. Neben den Nachweisen für Trag- und Gebrauchstauglichkeit werden aufbauend auf den Bemessungsergebnissen die Konstruktionsregeln und Bewehrungsführungen umfangreich dargestellt. Die im Lehrbuch vorgestellten theoretischen Grundlagen werden anhand zahlreicher Abbildungen erläutert. In jedem Kapitel sind zum besseren Verständnis umfangreiche Bemessungsbeispiele mit Praxisbezug enthalten. Um die LeserInnen für die Baupraxis vorzubereiten, werden auch die Erstellung von statischen Berechnungen, Schalplänen und von Bewehrungsplänen behandelt. Damit wird für den Hochbau eine umfassende Basis des Stahlbetonbaus vermittelt, welche einen erfolgreichen Start ins Berufsleben gewährleistet. KW - Abgesetzte Auflager KW - Bewehrung, Bewehrungsführung KW - Krafteinleitungsbereiche KW - Modellbildung KW - Rahmenknoten KW - Stabwerksmodelle KW - Stegöffnungen KW - Wandartige Träger Y1 - 2023 SN - 978-3-658-41336-1 U6 - https://doi.org/10.1007/978-3-658-41336-1 PB - Springer Fachmedien CY - Wiesbaden ER - TY - CHAP A1 - Höller, Christoph A1 - Blödt, Adrian T1 - Aufzugschächte in Holzbauweise – Konstruktionsprinzipien und Prognosemöglichkeiten für den Schallschutz T2 - Forum Holzbau, Bauphysik & Gebäudetechnik: 7. Internationale Fachtagung Bauphysik & Gebäudetechnik (BGT 2024), 24./25. April 2024, Friedrichshafen, Deutschland Y1 - 2024 PB - Forum Holzbau CY - Biel ER - TY - JOUR A1 - Kleinitz, Cornelia A1 - Apoh, Wazi A1 - Fiador, Ernest K. A1 - Kurapkat, Dietmar A1 - Linstädter, Jörg A1 - Loges, Kathrin A1 - Verstegen, Ute A1 - Zeitler, Annika T1 - Kpando, Volta Region, Ghana. Archaeology and ›Shared Heritage‹ of German Colonialism in Former Togoland. Research in 2022 and 2023 JF - e-Forschungsberichte des Deutschen Archäologischen Instituts N2 - A cooperative project focusing on the archaeology and ›shared heritage‹ of German colonialism in the former Togoland colony brings together capacities from Ghanaian and German partners in the fields of archaeology, history, ethnography, architecture/building archaeology and surveying/cartography. The project aims to document, research, preserve, and present built heritage from the German colonial period in close consultation and cooperation with local authorities and communities. Building on extensive archaeological research on German missionisation and colonisation of Togoland led by Wazi Apoh and students over the past 20 years, the project partners initially focus on archival and building archaeological research, including damage assessments and restoration/rehabilitation planning in addition to (GIS-)mapping. This report outlines preliminary results from preparatory research in 2022 and a first field season in the Volta Region of Ghana in early 2023, and it highlights possible avenues for further work. KW - Historische Bauforschung KW - Ghana KW - Voltaregion KW - Kolonialarchitektur KW - Afrikanische Archäologie KW - Baumaterialien KW - Kolonialismus KW - Christiliche Archäologie KW - Neuzeitliche Archäologie Y1 - 2023 U6 - https://doi.org/10.34780/06b8-361b SN - 2198-7734 IS - Faszikel 2-2023 SP - 20 EP - 32 CY - Berlin ER - TY - JOUR A1 - Kleinitz, Cornelia A1 - Apoh, Wazi A1 - Fiador, Ernest K. A1 - Kurapkat, Dietmar A1 - Linstädter, Jörg A1 - Loges, Kathrin A1 - Verstegen, Ute A1 - Zeitler, Annika T1 - Archäologie und „gemeinsames Erbe“ des deutschen Kolonialismus in Afrika BT - Das Volta-german Shared Colonial Heritage Project in Ghana JF - Blickpunkt Archäologie KW - Historische Bauforschung KW - Kolonialarchitektur KW - Ghana KW - Voltaregion KW - Afrikanische Archäologie KW - Baustoff KW - Kolonialismus KW - Christiliche Archäologie KW - Neuzeitliche Archäologie Y1 - 2023 SN - 2364-4796 VL - 2023 IS - 2/2023 PB - Dr. Friedrich Pfeil CY - München ER - TY - CHAP A1 - Hoeller, Christoph A1 - Mueller-Trapet, Markus T1 - Measured and predicted sound transmission through a laboratory concrete floor T2 - INTER-NOISE and NOISE-CON Congress and Conference Proceedings, INTER-NOISE24, Nantes, France N2 - The direct sound transmission through a simple, massive, homogeneous building element with and without lining is investigated experimentally and compared with analytical and empirical models from the literature. A 150 mm thick concrete floor and a 100 mm thick floating floor were measured in the floor transmission facility of the National Research Council Canada, i.e. without flanking sound transmission. In addition to the sound reduction index and the normalized impact sound pressure level, loss factors, radiation efficiencies, and mean squared velocities were recorded in the laboratory. The measured data is compared to established models of sound transmission. A focus is placed on the calculation model of ISO 12354-1 (Appendix B), which uses calculated radiation efficiencies and loss factors to predict the sound reduction index of heavy, homogeneous building elements. Some difficulties with the calculation model and the examples in the standard are discussed. In principle, the results in this study show that the calculation model of ISO 12354-1 gives good estimates when the correct input parameters are used. However, deviations between the calculated and the measured loss factors and radiation efficiencies have large effects on the accuracy of the estimates, particularly in the region around the coincidence frequency. Y1 - 2024 U6 - https://doi.org/10.3397/IN_2024_3902 SP - 7042 EP - 7050 PB - ingenta ER - TY - INPR A1 - Malz, Sebastian A1 - Sindersberger, Dirk A1 - Monkman, Gareth J. A1 - Steffens, Oliver A1 - Kusterle, Wolfgang T1 - Determination of the Water Content within Tunnel Linings to Assess Fire Safety T2 - SSRN Electronic Journal N2 - Fires in tunnels are known to lead to explosive spalling of the tunnel linings, mainly due to rapid expansion of water as a result of vaporization in the concrete. In order to determine water content and assess fire safety within tunnel linings a novel measurement system has been developed. The development process includes the calibration of the sensor system via both direct and indirect approaches. This work compares both calibration methods and shows the differences that can occur due to measurement uncertainty. This work presents the measured water content within the Inntal tunnel, Austria as a representative tunnel from a total of four investigated tunnels. The obtained water content is compared to that found in the literature, and recommendations for practical work in terms of fire safety is given. KW - tunnel inner lining KW - water content KW - moisture sensor KW - moisture measurement KW - Fire safety KW - concrete spalling Y1 - 2023 U6 - https://doi.org/10.2139/ssrn.4390700 ER - TY - CHAP A1 - Gebhardt, H. A1 - Linner, Thomas ED - Richter, Götz T1 - DIN Arbeitsausschuss „Alternde Gesellschaften“ : Einleitung T2 - Arbeit und Altern : Eine Bilanz nach 20 Jahren Forschung und Praxis Y1 - 2021 SN - 9783748909378 U6 - https://doi.org/10.5771/9783748909378-445 SP - 445 EP - 450 PB - Nomos ER - TY - CHAP A1 - Chow, Rosan A1 - Jonas, Wolfgang ED - Durling, David ED - Rust, Chris ED - Chen, Lin-Lin ED - Ashton, Philippa ED - Friedman, Ken T1 - Beyond Dualisms in Methodology. An Integrative Design Research Medium "MAPS" and some Reflections T2 - Undisciplined! Design Research Society Conference 2008, Sheffield Hallam, University, Sheffield, UK, 16-19 July 2008 N2 - Design research is an academic issue and increasingly an essential success factor for industrial, organizational and social innovation. The fierce rejection of 1st generation design methods in the early 1970s resulted in the postmodernist attitude of "no methods", and subsequently, after more than a decade, in the strong adoption of scientific methods, or "the" scientific method, for design research. The current situation regarding methodology is characterized by unproductive dualisms such as scientific methods vs. designerly methods, normative methods vs. descriptive methods, research vs. design. The potential of the early (1st generation) methods is neglected and the practical usefulness of design research is impeded. The suggestion for 2nd generation methods as discussed by Rittel and others has hardly been taken up in design. The development of a methodological tool / medium for research through design – MAPS1 – (which is the central part of the paper) presents the cause and catalyst for some reflections about the usability / desirability / usefulness of methodical support for the design (research) process. KW - Integrative Design Research Medium KW - Research Through Design KW - MAPS KW - Methodology Y1 - 2008 UR - https://shura.shu.ac.uk/477/1/fulltext.pdf SN - 978-1-84387-293-1 PB - Sheffield Hallam University CY - Shefield, UK ER - TY - JOUR A1 - Chow, Rosan A1 - Jonas, Wolfgang T1 - Case Transfer: A Design Approach by Artefacts and Projection JF - Design Issues Y1 - 2010 UR - https://www.researchgate.net/publication/254925186_Case_Transfer_A_Design_Approach_by_Artifacts_and_Projection U6 - https://doi.org/10.1162/DESI_a_00040 VL - 26 IS - 4 SP - 9 EP - 19 PB - MIT press ER - TY - JOUR A1 - Chow, Rosan A1 - Jonas, Wolfgang A1 - Romero-Tejedor, Felicidad T1 - Design Research in Germany? JF - Design Issues Y1 - 2015 U6 - https://doi.org/10.1162/DESI_e_00303 SN - 1531-4790 SN - 0747-9360 VL - 31 IS - 1 SP - 3 EP - 6 PB - MIT press CY - London ER - TY - JOUR A1 - Chow, Rosan T1 - Projection before Analysis JF - Design Principles and Practices: An International Journal Y1 - 2009 UR - https://www.academia.edu/1166242/Projection_before_Analysis VL - 3 IS - 1 SP - 341 EP - 346 PB - Academia ER - TY - BOOK ED - Timpe, Jakob T1 - 7 Year Itch BT - Sieben Jahre Studiengang Industriedesign an der Ostbayerischen Technischen Hochschule Regensburg 2011-2019 KW - Designstudium KW - Industriedesign KW - Produktgestaltung KW - Ostbayerische Technische Hochschule Regensburg Y1 - 2019 SN - 978-3-96018-086-9 PB - Morsbach CY - Regensburg ER - TY - JOUR A1 - Chow, Rosan A1 - Jonas, Wolfgang T1 - Case Transfer: A Design Approach by Artifacts and Projection JF - Design Issues Y1 - 2010 U6 - https://doi.org/10.1162/DESI_a_00040 VL - 26 IS - 4 SP - 9 EP - 19 PB - MIT Press ER - TY - CHAP A1 - Chow, Rosan ED - Verbeke, Johan ED - Jakimowicz, Adam ED - Jakimowicz, T1 - Fallman meets Jonas: Compare and Contrast two models of Design Research BT - Proceedings of the colloquium ‘Communicating (by) Design’, Sint-Lucas Brussels, 15th - 17th April 2009 T2 - Communicating (by) Design N2 - In the pursuit of a relevant yet flexible foundation for research in the design disciplines, practice-led research has generated a tremendous amount of interest in the recent years. A designer’s knowledge synthesizes intellectual, creative, experimental and interpretative skills, arguably exceeding the forms of knowledge privileged by, and in, conventional research. The “Communicating (by) Design” conference seeks to investigate developments in the sphere of research by (or through) design. While our main concern originates in architecture, other design disciplines are also of interest.The conference will investigate one of the central challenges for the designbased researcher, namely that of communicating. Communicating here may be understood as a set of processes, activities and events, which take place on different levels in designing - from individual, inner dialogues, through the issue of naming and defining terms to a more general problem of the representation of design knowledge - in order to articulate a set of intentions and values to an audience (which may be oneself ). Exploring aspects of defining, framing and sharing within design, the role of listening will also be raised, as the attitude that constitutes connectivity and allows conversation. The relationship between theory and practice, or “creative” and “critical” modes of inquiry, will also form an important theme of discussion, with a view to drawing the contours of new “hybrid” research practices. We accordingly welcome different representational forms relating to designled research - formal, explorative and/or interpretative - reflecting both doing and thinking about designing. The “Communicating (by) Design” conference is organized jointly between: Sint-Lucas School of Architecture in Brussels and Ghent, Belgium and Department of Architecture at the Chalmers University of Technology in Göteborg, Sweden. KW - research design KW - design research KW - research by designing KW - knowledge processes KW - design practice Y1 - 2009 UR - https://arch.kuleuven.be/onderzoek/publicaties/communicating-by-design SN - 9789081323802 SP - 107 EP - 113 PB - Hogeschool voor Wetenschap & Kunst CY - Brussels ER - TY - CHAP A1 - Chow, Rosan A1 - Jonas, Wolfgang ED - Malins, Julian T1 - Pericean Abduction, Signs & Design Transfer T2 - 8th European Academy of Design Conference ’Design Connexity’. Robert Gordon University, Aberdeen, Scotland, April 1-3, 2009 N2 - We take abduction to be the central 'logical' and social "mechanism" of knowledge generation in general, applicable to everyday life, design, and the sciences. In our designerly methodological terms, we speak of ANALYSIS (the inductive phase), PROJECTION (the abductive phase) and SYNTHESIS (the deductive phase). We suppose that projection is enabled by abduction, and that understanding the abductive mechanisms in design PROJECTION is essential for the development of genuine designerly concepts of research. We hypothesize that transfer and transferability are relevant concepts and that establishing their relation to abduction is necessary. We set up quasi-experiments to examine design transfer. Based on the results of the experiments and following , we relate Peircean semiotics to his logical theory: his classes of signs are also classes of abduction. Firstly, we subscribe to Peirce's semiotic -a sign is in a triadic relation among object, interpretant and sign itself. Then we... Y1 - 2009 UR - https://www.academia.edu/430886/PEIRCEAN_ABDUCTION_SIGNS_and_DESIGN_TRANSFER SN - 978-1-901085-97-6 SP - 87 EP - 91 PB - Robert Gordon University, Gray's School of Art CY - Aberdeen ER - TY - CHAP A1 - Chow, Rosan ED - Romero-Tejedor, Felicidad ED - Jonas, Wolfgang ED - den van Boom, Holger T1 - Potenziale der Designwissenschaft T2 - Positionen zur Designwissenschaft N2 - Designwissenschaft, Designtheorie, Designforschung ¿ diese Begriffe werden immer noch recht bunt gemischt verwendet. Wir halten Designwissenschaft für das übergeordnete Konzept, das die Aktivitäten und die Ergebnisse der Wissensproduktion im Design bezeichnet. Designwissenschaft entwirft auch Theorien und forscht, um neues Wissen im Design zu schaffen. Das Buch soll einige Aspekte des Für und Wider der Designwissenschaft erörtern. Es richtet sich an alle, die bezüglich der behandelten Themen nach Orientierung suchen. Das Buch wird auch signalisieren, in welch komplexe Kontexte Design eingebettet ist. Die vorliegende Sammlung bietet eine Momentaufnahme des Zustands der Designwissenschaft in Deutschland. Die Beiträge sind ernsthaft, engagiert, wenig ironisch und lassen Konvergenz in Richtung auf einen Konsens allenfalls erahnen. Es handelt sich, wie nicht anders zu erwarten, um eine erste Bestandsaufnahme, die, so hoffen wir, weitere Überlegungen, Diskussionen und Forschungen anregen wird. Y1 - 2010 UR - https://www.uni-kassel.de/upress/online/frei/978-3-89958-876-7.volltext.frei.pdf SN - 978-3-89958-876-7 SP - 32 EP - 36 PB - kassel university press CY - Kassel ER - TY - CHAP A1 - Jonas, Wolfgang A1 - Chow, Rosan A1 - Grand, Simon ED - Engels-Schwarzpaul, A.-Chr. ED - Peters, Michael A. T1 - Alternative Design Doctorates as Drivers for New Forms of Research T2 - Of Other Thoughts: Non-Traditional Ways to the Doctorate N2 - We currently observe an interesting paradox: on the one hand, a narrow and determined preoccupation with the world we actually live in, away from the multiple pasts and futures in which we are embedded. On the other hand, we note a recurrent appeal to transcend the present towards the future – without reference, however, to the questions, perspectives, value propositions and investments that might define the necessary steps for ‘moving forward’ in important areas of social, cultural and economic life. KW - Design Research KW - Knowledge Production KW - Alternative Design KW - Wicked Problem KW - Autopoietic System Y1 - 2013 SN - 94-6209-317-2 U6 - https://doi.org/10.1007/978-94-6209-317-1_18 SP - 183 EP - 202 PB - Springer CY - Rotterdam ER - TY - CHAP A1 - Chow, Rosan ED - Aebersold, Roman ED - Minder, Bettina ED - Léchot Hirt, Lysianne T1 - Case Transfer Vs. Case Study. An Evaluation of Case Study as a Method for Design Research T2 - "Focused" - Current Design Research Projects and Methods : Swiss Design Network Symposium 2008, Berne, 0-31 May 2008 Y1 - 2008 UR - https://www.academia.edu/1166337/Case_Transfer_Vs_Case_Study_An_Evaluation_of_Case_Study_as_a_Method_for_Design_Research SN - 978-3952313800 PB - SDN CY - Bern ER - TY - CHAP A1 - Chow, Rosan ED - Verbeke, Johan ED - Jakimowicz, Adam T1 - Abduction Revisited T2 - Proceedings of the colloquium ‘Communicating (by) Design’, Sint-Lucas Brussels, 15th - 17th April 2009 Y1 - 2009 UR - https://arch.kuleuven.be/onderzoek/publicaties/communicating-by-design SN - 9789081323802 SP - 193 EP - 197 PB - Chamlers University of Technology & Hogeschool voor Wetenshcp & Kunst CY - Brussels ER - TY - CHAP A1 - Chow, Rosan A1 - Bredies, Katharina ED - Lam, Felix T1 - Some Student-Driven Activities in Design Research in Germany T2 - cltad’s 5th international conference Challenging the curriculum: exploring discipline boundaries in art, design and media - 12th & 13th April, 2010 Novotel Tiergarten, Berlin Y1 - 2010 CY - Berlin ER - TY - CHAP A1 - Chow, Rosan ED - Mareis, Claudia ED - Joost, Gesche ED - Kimpel, Kora T1 - What Should be done with the Different Versions of Research Through Design T2 - Entwerfen - Wissen - Produzieren: Designforschung im Anwendungskontext Y1 - 2014 SN - 9783839414637 U6 - https://doi.org/10.1515/transcript.9783839414637 SP - 145 EP - 158 PB - transcript Verlag ER - TY - BOOK A1 - Busen, Tobias A1 - Knechtel, Miriam A1 - Knobling, Clemens A1 - Nagel, Elke A1 - Schuller, Manfred A1 - Todt, Birte T1 - Measured building survey N2 - The precisely measured documentation of historical buildings by means of drawings – the building survey – serves several purposes: it is not only an important part of the scientific study of architecture, but also an essential basis for building measures in existing contexts. It is the only way to undertake well-founded research respectively detailed architectural planning, from structural improvement to conservation and restoration measures. In addition to a historical overview of building surveying as a method, this volume mainly offers practical assistance regarding the different methods for documenting historic buildings – starting from manual methods of measuring up to electronic and computer-aided utilities available today. The content is complemented by many illustrations and examples as well as an introduction to methods, that go beyond the mere graphic documentation and thus represent ways of conducting thorough building examinations. The book offers easy access to the topic of building surveying, both for students as well as for anyone dealing professionally with historic buildings KW - Technical University of Munich KW - historic architecture KW - building history KW - building archaeology KW - heritage conservation KW - building documentation KW - architectural drawing KW - building survey KW - measurement KW - surveying Y1 - 2022 SN - 978-3-95884-038-6 U6 - https://doi.org/10.14459/2021md1636474 PB - TUM University Press ER - TY - BOOK A1 - Bulenda, Thomas T1 - Finite-Element-Modellierung 1 BT - Anwendungen in der linearen Statik N2 - Es gibt eine Vielzahl von „Wie-erstelle-ich-ein Finite-Element-Programm?“-Lehrbüchern, aber nur recht wenige Veröffentlichungen zur Frage „Wie wende ich ein Finite-Element-Programm an?“. Dieses Buch legt den Schwerpunkt auf die zweite Fragestellung. Es basiert auf den Vorlesungen zur Anwendung der Finite-Element-Methode, die der Autor seit 1998 an der OTH Regensburg hält. Deren Inhalte kommen aus seiner Tätigkeit als Prüfingenieur für Baustatik in einem großen Münchener Ingenieurbüro. Behandelt werden sowohl Fragestellungen, mit denen sich jeder Ingenieur konfrontiert sieht, wenn er Berechnungen mit einem Finite-Element-Programm erstellen will, als auch Problempunkte, die im Büro des Autors im Zuge einer Projektbearbeitung auftraten und auf den ersten Blick gar nicht so klar waren. In Teil 1 des zweibändigen Werks werden Themen aus der linearen Statik behandelt. KW - Berechnung komplexer Strukturen KW - Lineare Statik KW - Finite Elemente KW - Lineare Methoden KW - Nichtlineare Methoden KW - Dynamik Y1 - 2024 SN - 978-3-658-42203-5 U6 - https://doi.org/10.1007/978-3-658-42204-2 PB - Springer Nature ER - TY - BOOK A1 - Bulenda, Thomas T1 - Finite-Element-Modellierung 2 BT - Anwendungen in der nichtlinearen Statik N2 - ​Es gibt eine Vielzahl von „Wie-erstelle-ich-ein Finite-Element-Programm?“-Lehrbüchern, aber nur recht wenige Veröffentlichungen zur Frage „Wie wende ich ein Finite-Element-Programm an?“. Dieses Buch legt den Schwerpunkt auf die zweite Fragestellung. Es basiert auf den Vorlesungen zur Anwendung der Finite-Element-Methode, die der Autor seit 1998 an der OTH Regensburg hält. Deren Inhalte kommen aus seiner Tätigkeit als Prüfingenieur für Baustatik in einem großen Münchener Ingenieurbüro. Behandelt werden sowohl Fragestellungen, mit denen sich jeder Ingenieur konfrontiert sieht, wenn er Berechnungen mit einem Finite-Element-Programm erstellen will, als auch Problempunkte, die im Büro des Autors im Zuge einer Projektbearbeitung auftraten und auf den ersten Blick gar nicht so klar waren. Der 2.Teil des zweibändigen Werkes befasst sich mit Themen aus der nichtlinearen Statik. KW - Berechnung komplexer Strukturen KW - Lineare Statik KW - Finite Elemente KW - Lineare Methoden KW - Nichtlineare Methoden KW - Dynamik Y1 - 2024 SN - 978-3-658-42207-3 U6 - https://doi.org/10.1007/978-3-658-42208-0 PB - Springer Fachmedien ER - TY - JOUR A1 - Spirkl, Florian A1 - Wittl, Theresa A1 - Neidhart, Thomas T1 - Kohlendioxid-Bilanzierung: Rohrgrabenverfüllung mit Sand vs. ZFSV JF - Korrespondenz Abwasser, Abfall N2 - Als Alternative zur konventionellen Bettung von Leitungen und Rohren in Sand werden immer häufiger Zeitweise fließfähige, Selbstverdichtende Verfüllbaustoffe (ZFSV) verwendet. Die Bettung in ZFSV kann zu einer Zeit- und Kostenersparnis führen. In diesem Beitrag wird gezeigt, dass die Verwendung von ZFSV zur Rohrgrabenverfüllung gegenüber der konventionellen Sandbettung neben der Schonung der natürlichen Ressourcen zusätzlich ein Einsparpotenzial bezüglich der Treibhausgasemissionen aufweist. Y1 - 2024 U6 - https://doi.org/10.3242/kae2024.04.004 VL - 71 IS - 4 SP - 294 EP - 299 PB - GFA CY - Hennef ER - TY - RPRT A1 - Kuhn, Alexander A1 - Franzius, Jan Niklas A1 - Möller, Dennis A1 - Pralle, Norbert A1 - Reich, Franziska A1 - Hellmuth, René A1 - Tombeil, Anne-Sophie A1 - Wenzel, Günter A1 - Linner, Thomas A1 - Schmailzl, Marc T1 - Machbarkeitsstudie für den Aufbau eines Kompetenzzentrums für Baurobotik im Hochbau : Akronym: CONSAS (Construction Assistance Robotics) : innerhalb des Förderschwerpunktes des BMBF "Roboter für Assistenzfunktionen: Interaktion in der Praxis" Phase 1: Machbarkeitsstudie N2 - The overall aim of the project proposal is to develop a systematic, integrative approach for the use of assistance robotics on building construction sites, involving all stakeholders in construction robotics. Y1 - 2022 U6 - https://doi.org/10.2314/KXP:1845903056 N1 - CC BY-ND 3.0 PB - Ed. Züblin AG CY - Stuttgart ER - TY - CHAP A1 - Saffert, Anne-Sophie A1 - Schmailzl, Marc A1 - Spitzhirn, Michael A1 - Linner, Thomas T1 - A Cyber-Physical Toolbox for Teaching Digital Construction – Technical Configuration, Learning Tactics and Hands-On Testing and Evaluation in Dedicated Courses T2 - Learning Factories of the Future, Proceedings of the 14th Conference on Learning Factories 2024, Volume 2 N2 - The construction industry faces substantial economic, environmental, and social challenges. Simultaneously, the industry experiences one of the lowest degrees of digitalization. In this context, cyber-physical education is essential to empower learners with skills to utilize digital and physical solutions more effectively. Therefore, a modular as well as construction specific learning setting was designed. The setting facilitates a range of topics, such as production planning considering human and robot capabilities, (semi-) automated construction machines, robotics, sensing & actuation and more. The digital part of the cyber-physical toolbox consists of various methods and tools to learn programming languages, frameworks, offline simulators, post-processors and more. This step is essential to enable an end-to-end data-/workflow from design (e.g., BIM-based planning methodologies) to (machine-based) production. A focus is given to human-machine/-robot collaboration and appropriate simulation tools (e.g., emaWD) enabling the incorporation of human factors. The physical setting is highly modular, and each device and its periphery can be customized to a broad variety of learning scenarios and levels. This paper describes the details of the learning setting, extracts learning strategies, and analyzes selected learning scenarios and their initial testing in various learning formats. KW - learning setting KW - production planning KW - construction industry KW - human-robot collaboration Y1 - 2024 SN - 9783031653995 U6 - https://doi.org/10.1007/978-3-031-65400-8_10 SN - 2367-3370 SP - 83 EP - 91 PB - Springer Nature CY - Cham ER - TY - CHAP A1 - Albrecht, Sophie Viktoria A1 - Thiel, Charlotte A1 - Hellerbrand, Stefan A1 - Weininger, Florian T1 - Possibilities for Reducing the Environmental Impact in the Construction Industry Using the Example of a 3D Printed Staircase T2 - Proceedings of the 4th International Conference on Sustainable Development in Civil, Urban and Transportation Engineering (CUTE 2024), 14–17 October, Wrocław, Poland N2 - The construction industry faces numerous challenges, including environmental sustainability, high material costs, and a shortage of skilled labor. Modern technologies enabling digital fabrication present opportunities to reduce raw material consumption and waste generation. Among these, 3D printing technologies offer distinct advantages over traditional construction methods, particularly in handling complex geometries. However, the significant environmental impact of cement in 3D printed concrete, due to its high rheological and printability requirements, remains a concern. This study introduces a novel application of 3D printed permanent formwork in the construction of a winder staircase, assessed through an environmental Life Cycle Assessment (LCA) from cradle to gate. By comparing the environmental impacts of various construction materials and processes, the study highlights the comparative advantages and disadvantages of conventional methods versus 3D printing. The LCA results reveal that traditional production methods, particularly those using plywood formwork, exhibit higher environmental impacts. In contrast, timber formwork performs better than most 3D printed mixtures in terms of Global Warming Potential (GWP), Acidification Potential (AP), and Abiotic Depletion Potential (ADP). The findings of this study underscore the potential of additive manufacturing for sustainable construction, particularly through the use of low clinker cement in 3D printed formwork, offering a promising pathway towards reducing the environmental footprint of construction activities. Y1 - 2025 SN - 978-981-97-9400-3 U6 - https://doi.org/10.1007/978-981-97-9400-3_6 SP - 55 EP - 64 PB - Springer Nature ER - TY - JOUR A1 - Haynack, Alexander A1 - Timothy, Jithender J. A1 - Kränkel, Thomas A1 - Gehlen, Christoph A1 - Thiel, Charlotte T1 - Analyse des Frost‐Tausalz‐Widerstands zementgebundener Baustoffe mittels 3D‐Laserscanning JF - ce/papers: Proceedings in Civil Engineering N2 - Eine Herausforderung performancebasierter Prüfverfahren zur Bewertung der Dauerhaftigkeit ist die Beschleunigung natürlicher Mechanismen. Dies ist notwendig, um innerhalb kurzer Zeit die Langzeit-Leistungsfähigkeit ermitteln zu können. Die Bestimmung der Frost-Tausalzbeständigkeit von Beton kann durch den CDF-Test erfolgen, welcher für Betone mit ausreichendem Frost-Tausalz-Widerstand sehr gut funktioniert. Bei Proben mit einer unzureichenden bzw. unbekannten Performance können erhöhte Randabwitterungen auftreten, welche durch das Ablösen des seitlichen Abdichtbands entstehen. Der zunehmende Randeinfluss führt so zu einer Verfälschung der Ergebnisse und zu einer Unterschätzung der tatsächlichen Performance des Bauteils. In diesem Beitrag werden Mörtel- und Betonprobekörper mit unterschiedlichen Abwitterungsraten in Anlehnung an das CDF-Verfahren untersucht. Zusätzlich wird die Oberflächenschädigung der Proben anhand einer neuartigen Messmethode mittels hochauflösendem 3D-Laserscanning ausgewertet. Die Ergebnisse zeigen, dass die Randeffekte mit der Laserscan-Methode umgangen und vergleichbare Ergebnisse zu den CDF-Untersuchungen erzielt werden können. Somit können Betone ohne Randeinflüsse charakterisiert und eine präzise Prognose der Langzeitbeständigkeit getroffen werden. KW - Beton KW - Mörtel KW - Frost-Tausalz-Widerstand KW - Dauerhaftigkeit KW - 3D-Laserscanning Y1 - 2023 U6 - https://doi.org/10.1002/cepa.2951 SN - 2509-7075 VL - 6 IS - 6 SP - 1189 EP - 1196 PB - Ernst & Sohn ER - TY - CHAP A1 - Jonas, Wolfgang A1 - Chow, Rosan A1 - Bredies, Katharina A1 - Vent, Kathrin ED - Durling, David ED - Chen, Lin-Lin ED - Poldma, T. ED - Roworth-Stokes, S. ED - Stolterman, E. T1 - Far Beyond Dualisms in Methodology - An Integrative Design Research Medium MAPS T2 - Design & Complexity - Proceedings of the Design Research Society Conference (DRS 2010), Montreal, 7 - 9 July, 2010 N2 - Design research is an academic issue and increasingly a success factor for industrial,organizational and social innovation. Efficient methodical support is crucial. The fiercerejection of 1st generation design methods in the early 1970s resulted in thepostmodernist attitude of "no methods", and subsequently in the strong adoption ofscientific ways of thinking for design research. The situation regarding methodologyhas been characterized by unproductive dualisms such as scientific vs. designerlymethods, normative vs. descriptive methods, research vs. design. The potential of theearly (1st generation) methods is neglected and the practical usefulness of designresearch is impeded. The suggestion for 2nd generation methods, conceived asdiscursive instruments, as discussed by Rittel and others has hardly been taken up indesign. The development of MAPS is aimed at the support of practice-oriented design,innovation and research processes. The long-term aim is the development of anintegrated knowledge and communication platform for research through design. MAPSis based upon the idea of a productive reconciliation of the strong dualisms between"scientific" and "designerly" modes of inquiry and supports the emerging concept ofdesign thinking. The paper reports on the ongoing research and development processfrom MAPS1.0 towards MAPS2.0 and beyond. KW - research through design KW - methodology KW - MAPS KW - integrative design research medium Y1 - 2010 UR - https://dl.designresearchsociety.org/conference-volumes/7/ SN - 978-2-9811985-2-5 PB - DRS Digtial Library CY - Montreal, Canada ER - TY - JOUR A1 - Grimm, Benedikt A1 - Thiel, Charlotte A1 - Kränkel, Thomas A1 - Gehlen, Christoph T1 - Einfluss der Permeation auf die Carbonatisierung von Beton JF - ce/papers: Proceedings in Civil Engineering N2 - Die Carbonatisierung von Beton kann einerseits zu Schäden bei Stahlbetonbauwerken führen, andererseits kann der Beton so CO2 speichern und damit seinen CO2-Fußabdruck verringern. In diesem Beitrag wird dargestellt, wie eine effiziente Beschleunigung der Carbonatisierung durch Anlegen eines geringen äußeren Drucks erreicht werden kann. Damit wird neben der Diffusion der wesentlich schneller ablaufende Transportmechanismus der Permeation ausgenutzt, der das CO2 tiefer in das Probeninnere transportiert und damit in kurzer Zeit die Bestimmung des Carbonatisierungswiderstand zementgebundener Materialien ermöglicht. Hierzu wurde eine Prüfeinrichtung entwickelt, die es ermöglicht, die CO2-Konzentration und in gewissen Grenzen auch relative Luftfeuchte sowie die Temperatur gezielt einzustellen und zu steuern, um so Mörtel- und Betonproben schnell und präzise zu carbonatisieren. Der Einfluss verschiedener Druckstufen und Wechselzyklen wird dargelegt und die resultierenden chemischen und physikalischen Veränderungen der Proben bestimmt. Als besonders effizient und gleichzeitig realitätsnah erwies sich die konstante CO2-Beaufschlagung mit 3 Vol.-% CO2 mit zusätzlichem, moderatem Gasdruck. Das hier entwickelte Verfahren kann daher genutzt werden, um Betone schnell und effizient in zeitraffenden Materialtests hinsichtlich Carbonatisierungswiderstand zu charakterisieren. KW - Beton KW - Carbonatisierung KW - Prüfverfahren KW - Gasdruck KW - Permeation Y1 - 2023 U6 - https://doi.org/10.1002/cepa.3005 SN - 2509-7075 VL - 6 IS - 6 SP - 1348 EP - 1357 PB - Ernst & Sohn CY - Berlin ER - TY - CHAP A1 - Thiel, Charlotte A1 - Hechtl, C. Maximilian A1 - Gehlen, Christoph A1 - Kränkel, Thomas ED - Lowke, Dirk ED - Freund, Niklas ED - Böhler, David ED - Herding, Friedrich T1 - Sustainability Potential of Additive Manufactured Concrete Structures – Studies on the Life Cycle Assessment and Circularity of an Extruded Exterior Wall T2 - Fourth RILEM International Conference on Concrete and Digital Fabrication (DC 2024), Munich, Germany, September 2024 N2 - The Brundtland Report defined sustainable development as a development that meets the needs of the present without compromising the ability of future generations to meet their own needs. If this definition is applied to the construction sector, a new, circular approach to cementitious materials is required. Additive manufacturing (AM) enables to design material-efficient and monolithic structures that meet physical and chemical requirements of building standards while allowing reuse or high-quality recycling of concrete. Here, the environmental impact as well as the circularity potential of an additively manufactured exterior wall, produced by 3D concrete extrusion, are determined. To classify the results, the additively manufactured exterior wall is compared with a conventional concrete construction. Finally, various options for optimizing the printed wall are considered and evaluated. Additive manufacturing enabled significant material savings compared to conventional construction. The environmental impacts strongly depend on the used concrete composition. For example, greenhouse gas emissions could be reduced by 20% when changing the type of lightweight aggregate. The additively manufactured exterior wall exhibited advantages in terms of circularity. Through further development and research, additive manufacturing of concrete can promote a paradigm shift towards sustainable practices. Y1 - 2024 SN - 978-3-031-70030-9 U6 - https://doi.org/10.1007/978-3-031-70031-6_2 SP - 13 EP - 21 PB - SPRINGER INTERNATIONAL PU ER - TY - CHAP A1 - Gmeiner, Cornelia A1 - Lengenfeld, Jonas A1 - Schaller, Katharina ED - Brandt, Sigrid ED - Haspel, Jörg ED - Paschke, Ralph ED - Ziesemer, John T1 - The Old "Jahn Stadium" in Regensburg. A Lost Piece of Olympic History T2 - Das moderne Erbe der Olympischen Spiele / The Modern Heritage of the Olympic Games Historic Sports Sites Y1 - 2021 UR - https://www.icomos.de/icomos/pdf/icomos_olympia_epaper_doppelseite.pdf SN - 978-3-945880-80-7 SP - 213 EP - 215 PB - Hendrik Bäßler Verlag CY - Berlin ER - TY - CHAP A1 - Gmeiner, Cornelia ED - Erkens, Franz-Reiner T1 - Der Torturm der Veste Oberhaus in Passau T2 - Passauer Jahrbuch KW - Historische Bauforschung KW - Bauaufnahme KW - Mittelalter Y1 - 2019 SN - 1862-3212 VL - 61 SP - 83 EP - 132 CY - Passau ER - TY - CHAP A1 - Mühlberger, Thomas A1 - Schoplocher, Paul Dragos A1 - Steffens, Oliver ED - Fouad, Nabil A. T1 - Thermische Gebäudesimulation: aktuelle Anwendungen und Erweiterungen mittels der Finite‐Elemente‐Methode T2 - Bauphysik-Kalender 2025: Simulationen, BIM und KI N2 - Nach einem kurzen historischen Abriss der Entwicklung der Gebäudesimulation wird die aktuell übliche gleichungsbasierte Kompaktmodell-Simulation beschrieben und deren praktische Anwendung aufgezeigt. Dabei wird auf die Bedeutung der Validierung von Simulationstools und auf etablierte Validierungsstandards eingegangen. Gebäudesimulation dient der Optimierung des Bauens in allen Planungsphasen. Mit Praxisbeispielen vom sommerlichen Wärmeschutz bis hin zur Modellierung innovativer Konstruktionen werden unterschiedliche Einsatzbereiche demonstriert. Im zweiten Teil wird die Verwendung der Finite-Elemente-Methode (FEM) für die bauphysikalische Modellierung vorgestellt. Anhand von Beispielen zeigen wir, dass die (rechenzeitintensive) FEM aufgrund einer detaillierteren Modellierung von Geometrie, Strahlung und Konvektion präzisere Simulationsergebnisse liefert. Zum Abschluss werden Wege vorgeschlagen, wie dies zur Erweiterung der schnelleren Kompaktmodell-Simulation eingesetzt werden kann. KW - Energieeffizienz KW - Finite-Elemente-Methode KW - Gebäudesimulation KW - Kompaktmodelle KW - thermische Bauphysik Y1 - 2025 SN - 9783433034514 U6 - https://doi.org/10.1002/9783433612095.ch12 SP - 435 EP - 468 PB - Ernst & Sohn CY - Berlin ER - TY - GEN A1 - Schermer, Detleff T1 - Test set-up and proposed testing procedure for the determination of masonry walls under in-plane shear loadings : Brick and Block Masonry: Trends, Innovations and Challenges T2 - Proceedings of the 16th International Brick and Block Masonry Conference (IMAC), Padova, Italy, 26-30 June 2016 Y1 - 2016 SP - 1883 EP - 1888 PB - Routledge ER - TY - CHAP A1 - Höng, Simon A1 - Eder, Friedrich T1 - Methode zur Generierung multimodalersynthetischer Daten aus parametrischen BIM-Modellen zur Nutzung in KI-Systemen T2 - Tagungsband 34. Forum Bauinformatik, 06. - 08.09.2023, Bochum N2 - Für die erfolgreiche Implementierung von KI-Systemen ist eine große Menge an relevanten (und gelabelten) Trainingsdaten nötig. Die Datenqualität, Format, Struktur und nicht zuletzt urheberrechtliche Belange schränken die unmittelbare Nutzung vorhandener Daten ein und hindern die gewinnbringende Nutzung dieser Technologien in der Praxis. In diesem Beitrag wird ein Ansatz vorgestellt, der auf Basis einer parametrischen bzw. regelbasierten Erstellung von BIM-Modellen synthetische, gelabelte Trainingsdaten für die nachgelagerte Nutzung in diversen KI-Workflows generiert. Die Modelle werden mithilfe einer C#-Anwendung über die API von Autodesk Revit erzeugt und können durch automatisiertes Postprocessing mittels Python zu annotierten Daten in gängigen Austauschformaten aufbereitet werden. Die synthetischen Bauwerksmodelle ermöglichen die Ableitung multimodaler Trainings-Datensätze. Das heißt, sie können in unterschiedlichen Dateiformaten vorgehalten werden. Dadurch lassen sich Datensätze erzeugen, die auf den jeweiligen Anwendungsfall zugeschnitten sind (z. B.: Rastergrafiken, Punktwolken, CAD- oder BIM-Formate). Die Daten lassen sich somit in entsprechende KI-Systeme integrieren. Dieser Lösungsansatz wird am Anwendungsbeispiel einer KI-gestützten Objektklassifizierung in 2D-Plänen auf Basis synthetischer Datensätze im COCO-Format durchgeführt. Die künstlich erzeugten Plandaten in Anlehnung an Positionspläne von rasterförmig aufgebauten Skelettbauwerken konnten erfolgreich einem KI-System als Trainingsdaten zugeführt werden. Damit wird die nahtlose Verkettung der einzelnen Prozessschritte (Modellierung, Annotation, Integration) validiert. Die Ergebnisse werden abschließend evaluiert und Optimierungsansätze diskutiert. KW - AI KW - Machine Learning KW - Computer Vision KW - Synthetic Data KW - BIM Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:294-101306 SP - 398 EP - 405 ER - TY - CHAP A1 - Hu, Rongbo A1 - Pan, Wen A1 - Iturralde, Kepa A1 - Linner, Thomas A1 - Bock, Thomas T1 - Construction Automation and Robotics for Concrete Construction: Case Studies on Research, Development, and Innovations T2 - Proceedings of the 40th International Association for Automation and Robotics in Construction (ISARC 2023), Chennai, India N2 - The construction industry, supported by the materials industry, is a major user of natural resources. Automation and robotics have the potential to play a key role in the development of circular construction by increasing productivity, reducing waste, increasing safety, and mitigating labor shortages. Starting with a brief synopsis of the history of construction robotics and the concept of robot-oriented design, this article presents exemplary case studies of research projects and entrepreneurial activities in which the authors have participated that have contributed to the advancement of concrete construction. The activities of the authors have systematically led to spin-offs and start-ups, especially in recent years (e.g., CREDO Robotics GmbH, ARE23 GmbH, KEWAZO GmbH, ExlenTec Robotics GmbH, etc.), which shows that the use of construction robots is becoming an important part of the construction industry. With the use of automation and robotics in the built environment especially for concrete construction, current challenges such as the housing shortage can be addressed using the leading machinery and robot technology in Germany and other parts of the world. The knowledge and know-hows gained in these endeavors will lay the groundwork for the next frontier of construction robotics beyond the construction sites. Y1 - 2023 SN - 978-0-6458322-0-4 U6 - https://doi.org/10.22260/ISARC2023/0095 SN - 2413-5844 SP - 683 EP - 690 PB - IAARC ER - TY - CHAP A1 - Kuhn, Alexander A1 - Franzius, Jan Niklas A1 - Möller, Dennis A1 - Pralle, Norbert A1 - Reich, Franziska A1 - Hellmuth, René A1 - Tombeil, Anne-Sophie A1 - Wenzel, Günter A1 - Linner, Thomas A1 - Schmailzl, Marc A1 - Hu, Rongbo A1 - Bock, Thomas A1 - Maufroy, Christophe A1 - Kopp, Verena A1 - Bölke, Nico A1 - Daub, Urban T1 - Kompetenzzentrum für Baurobotik im Hochbau (CONSAS) - Förderkennzeichen 16SV8637 T2 - Roboter für Assistenzfunktionen: Konzeptstudien für die Interaktion in der Praxis Y1 - 2023 UR - https://www.researchgate.net/publication/373084211_Kompetenzzentrum_fur_Baurobotik_im_Hochbau_CONSAS_-_Forderkennzeichen_16SV8637 SN - 9783731512448 SP - 169 EP - 207 ER - TY - CHAP A1 - Hu, Rongbo A1 - Iturralde, Kepa A1 - Pan, Wen A1 - Linner, Thomas A1 - Bock, Thomas ED - Bergmeister, Konrad ED - Fingerloos, Frank ED - Wörner, Johann-Dietrich T1 - Bauautomatisierung und Robotik im Betonbau: Fallstudien zu Forschung, Entwicklung und Innovation T2 - Beton-Kalender 2024 Y1 - 2023 SN - 978-3-433-03407-1 SP - 563 EP - 573 PB - Ernst & Sohn CY - Berlin ER - TY - JOUR A1 - Marzani, Giulia A1 - Tondelli, Simona A1 - Kuma, Yuko A1 - Cruz Rios, Fernanda A1 - Hu, Rongbo A1 - Bock, Thomas A1 - Linner, Thomas T1 - Embedding Circular Economy in the Construction Sector Policy Framework: Experiences from EU, U.S., and Japan for Better Future Cities JF - Smart Cities N2 - The transition towards a Circular Economy (CE) in the construction sector is essential to achieving sustainable, inclusive smart cities. This study examines the integration of CE principles into construction policies across four key global contexts: the European Union (focusing on Italy and Germany), the United States, and Japan. Through a comparative policy analysis, the research identifies best practices, implementation barriers, and the role of digitalization in advancing CE strategies. In Europe, CE is embedded in policy frameworks such as the Green Deal and the New Circular Economy Action Plan, driving the shift toward sustainable urban development. The United States, while in the early stages of CE adoption, is fostering circular initiatives at local levels, particularly in waste management and building deconstruction. Japan’s policy landscape integrates CE within a broader strategy for resource efficiency, emphasizing technological innovation. The findings highlight the necessity of a research-driven approach to inform policies that leverage digital tools, such as Building Information Modeling and Digital Product Passports, to enhance material traceability and urban circularity. This study contributes to the global effort of designing smart cities that are not only technologically advanced but also environmentally and socially sustainable through the adoption of CE principles in the built environment. Y1 - 2025 U6 - https://doi.org/10.3390/smartcities8020048 VL - 8 IS - 2 PB - MDPI ER - TY - CHAP A1 - Linner, Thomas A1 - Schmailzl, Marc A1 - Bock, Thomas A1 - Hu, Rongbo A1 - Güttler, Jörg T1 - Active Assisted Living Technology in the Context of the Built Environment T2 - The Routledge Companion to Ecological Design Thinking: Healthful Ecotopian Visions for Architecture and Urbanism Y1 - 2022 U6 - https://doi.org/10.4324/9781003183181-50 PB - Routledge CY - New York ER - TY - CHAP A1 - Schmailzl, Marc A1 - Saffert, Anne-Sophie A1 - Karamara, Merve A1 - Linner, Thomas A1 - Eder, Friedrich A1 - Hoeng, Simon Konrad A1 - Obergriesser, Mathias T1 - Enhancing Decision-Making for Human-Centered Construction Robotics: A Methodological Framework T2 - Proceedings of the 41st International Symposium on Automation and Robotics in Construction (ISARC), Lille, France N2 - While the Architecture, Engineering, and Construction (AEC) industry is increasingly aware of the rising demands for productivity and human-centered construction improvements, the holistic adoption of robotics as a fundamental strategy to address these challenges has not yet reached comprehensive fruition. This paper therefore introduces a methodological framework aiming to address the industry's pressing need for a systematic approach for assessing the feasibility of integrating robotics into human-centered construction processes. It aims to enhance decision-making regarding the degree of automation in human-centered construction processes, ranging from partial to full robotization or non-robotization. The framework is characterized by a more holistic end-to-end data-/workflow and therefore adopts a multifaceted approach, leveraging BIM-based planning methodologies and integrating new technologies [e.g., Motion Capturing (MoCap), work process simulation software incorporating Digital Human Models (DHM), self-developed conversion/interfacing software and more] that have not been widely used in the industry to date. Subsequently, the framework is evaluated in a real-life bricklaying construction process to ensure a more application-based approach. Overall, the framework advances current construction processes with a more inclusive and conscious technology infill to empower construction professionals with the workflow and corresponding tools necessary for the practical integration of robotics into human-centered construction processes. KW - Decision-Making KW - Framework KW - Workflow KW - AEC Industry KW - Robotics KW - Building Information Modeling (BIM) KW - Human-Centered KW - Motion Capturing Y1 - 2024 SN - 978-0-6458322-1-1 U6 - https://doi.org/10.22260/ISARC2024/0083 SN - 2413-5844 SP - 637 EP - 644 PB - International Association for Automation and Robotics in Construction (IAARC) ER - TY - CHAP A1 - Hu, Rongbo A1 - Bock, Thomas A1 - Lu, Yuan A1 - Linner, Thomas ED - Dunmade, Israel Sunday ED - Daramola, Michael Olawale ED - Green Energy and Technology, T1 - A Procedure Model for Developing Gerontechnological Solutions to Achieve Demographic Sustainability in Aging Society T2 - Sustainable Engeneering N2 - Population aging is arguably one of the most serious challenges facing human society. It is not only a severe crisis in the developed world but also a rigorous threat to emerging economies. Therefore, vigorous measures need to be taken to mitigate the impact of aging society. This chapter proposes a procedure model as the foundation to systematically develop gerontechnological solutions. Based on the analysis of the state-of-the-art assistive smart furniture and smart home solutions and the requirements of older adults, a service system called Ambient Rehabilitation Kit that transforms clinical and care environments into personalized modular sensing, prevention, and intervention systems was proposed, encouraging older adults to become healthier through various activities. To achieve that goal, several modular smart interior devices integrating advanced sensing and assistive technologies were developed which seamlessly materialize the care concepts and functionality. Meanwhile, a strategy for testing and exhibiting the system was proposed. Furthermore, this chapter also introduces a framework for the cost-benefit analysis of the gerontechnological solutions compared to traditional care methods. Finally, in order to mitigate the severe threat imposed by rapid population aging to the social sustainability of emerging economies, the prospects for implementing the Ambient Rehabilitation Kit in China’s market are discussed, and a research and development action plan is proposed based on the results of a nationwide opinion survey. KW - Aging society KW - Demographic sustainability KW - Gerontechnology KW - Procedure model KW - Smart furniture KW - Smart home Y1 - 2024 SN - 978-3-031-47214-5 U6 - https://doi.org/10.1007/978-3-031-47215-2_26 SP - 449 EP - 475 PB - Springer ER - TY - CHAP A1 - Bulenda, Thomas A1 - Knippers, Jan A1 - Sailer, S. ED - Ramm, Ekkehard ED - Stein, W. ED - Wunderlich, W. T1 - Untersuchungen zum Tragverhalten von Netzkuppeln T2 - Finite Elemente in der Baupraxis : Modellierung, Berechnung und Konstruktion ; Beiträge der Tagung FEM '95 an der Universität Stuttgart am 23. und 24. Februar 1995 KW - Finite Elemente, Nichtlinearität, Stabilität, Gitterschalen Y1 - 1995 SN - 978-3-433-01289-5 SN - 3-433-01289-X SP - 201 EP - 212 PB - Ernst CY - Berlin ER - TY - CHAP A1 - Bulenda, Thomas A1 - Knippers, Jan A1 - Park, D.-U. ED - Katz, Casimir ED - Protopsaltis, Byron T1 - Traglastberechnung von Gitterschalentonnen T2 - Software für Statik und Konstruktion : Berichte des 9.SOFiSTiK Anwender Seminars, Nürnberg, Juni 1997 KW - Finite Elemente KW - Nichtlinearität KW - Stabilität KW - Gitterschalen Y1 - 1998 SN - 9789054109549 SN - 9054109548 SP - 437 EP - 460 ER - TY - CHAP A1 - Sýkora, Miroslav A1 - Holický, Milan A1 - Jung, Karel A1 - Diamantidis, Dimitris ED - Akiyama, Mitsuyoshi ED - Furuta, Hitoshi ED - Frangopol, Dan M. T1 - Target reliability levels for assessment of existing structures considering economic and societal aspects T2 - Life-Cycle of Structural Systems N2 - Specification of the target reliability levels is one of the key issues of the assessment of existing structures. ISO 13822:2010 and ISO 2394:1998 indicate procedures for deriving the target reliability levels by optimisation of the total cost related to an assumed remaining working life of a structure. In the submitted study this approach is applied to estimate the target reliability levels of an existing structural member in conjunction with the human safety criteria. Obtained results are critically compared with the recommendations given in present standards. It appears that the requirement on the same target reliability levels for existing structures as for new structures is uneconomical. Further, the cost optimisation seems to yield rather low reliability levels and human safety criteria become commonly decisive for specification of the target reliabilities of existing structures. Y1 - 2014 SN - 9780429227196 U6 - https://doi.org/10.1201/b17618-121 SP - 838 EP - 845 PB - CRC Press CY - London ER - TY - CHAP A1 - Thumann, Maria A1 - Briendl, Lukas G. A1 - Juhart, Joachim A1 - Kusterle, Wolfgang ED - Teubert, Oliver ED - Kusterle, Wolfgang ED - Greim, Markus T1 - Rheologische Untersuchungen an Frischbetonmischungen für Spritzbeton T2 - Rheologische Messungen an Baustoffen 2019 : Tagungsband zum 28. Workshop und Kolloquium, 13. und 14. März an der OTH Regensburg KW - Beton KW - Rheologie Y1 - 2019 SN - 978-3-7482-4651-0 PB - tredition CY - Hamburg ER - TY - RPRT A1 - Hu, Rongbo A1 - Kabouteh, Amir A1 - Schlandt, Marcel A1 - Güttler, Jörg A1 - Linner, Thomas A1 - Kozak, Dominika A1 - Walter, B. A1 - Schäpers, Barbara A1 - Randriambelonoro, Mirana E. T1 - Partly functional / functional mock-ups and prototypes of Personalised Intelligent Interior Units (PI²Us) BT - Deliverable submitted as part of the EU H2020 research project REACH (Responsive Engagement of the Elderly promoting Activity and Customized Healthcare), Grant Agreement No. 690425 (Report number: REACH2020 Deliverable D24) N2 - This deliverable report examines the outcome of the construction of functional or partly functional prototypes or mock-ups of Personalized Interior Intelligent Environment Units (PI²Us) for demonstration and testing purposes, associated with Task T5.4. The first part of this document will give an overview of the relation of this task to other tasks of WP5, other work packages, and the larger framework of the REACH project. The second part sets out the details of the progressive development from early concepts to the current prototyping stage. Moreover, the subsequent lab-based testing is described in the third part of the report. This includes both already carried out and planned testing activities for either early stage validation or final demonstration in a naturalistic test environment. Finally, part four summarizes the results and puts the different prototypes in perspective to the respective touchpoints and the overall REACH engine functionality. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 690425. Y1 - 2019 UR - https://www.researchgate.net/publication/333324604_Partly_functional_functional_mock-ups_and_prototypes_of_Personalised_Intelligent_Interior_Units_PIUs N1 - REACH2020: Responsive Engagement of the Elderly promoting Activity and Customized Healthcare (Horizon 2020, PHC track) ER - TY - CHAP A1 - Steindl, F. A1 - Mittermayr, Florian A1 - Thumann, Maria A1 - Juhart, Joachim A1 - Galan Garcia, Isabel A1 - Baldermann, Andre A1 - Briendl, Lukas G. A1 - Sakoparnig, Marlene A1 - Röck, Rudolf A1 - Kusterle, Wolfgang T1 - Sulfate resistance of dry mix shotcretes with new binder composition T2 - ICCC 2019: 15th International Congress on the Chemistry of Cement, 16.-20.09.2019, Prague, Czech Republik N2 - Improved understanding of the mechanisms underlying deleterious chemical attacks is necessary to better predict the long-term performance and durability of shotcrete in aggressive environments. In the scope of the research project “ASSpC - Advanced and Sustainable Sprayed Concrete”, new durable and sustainable shotcretes and new test methods are developed. In order to increase shotcrete durability, the spray cement (specified in Austrian Guideline “Sprayed concrete”) used is substituted with supplementary cementitious materials (SCMs). However, in the past SCMs have seen only limited use in the application of dry-mix shotcrete. This contribution presents 6 new mix designs intended to be used for dry-mix shotcrete, each with varying amounts and types of SCMs, and compares their performance and sprayability with a commercially available spray cement. As sulfate attack is one of the major threats to shotcrete (e.g. in tunnelling), the resistance of the new mixes against sulfate attack is tested using a modified version of the Swiss sulfate test according to SIA 262/1:2013. This approach provides new insights into damaging mechanisms of dry mix shotcrete in sulfate-loaded environments Y1 - 2019 SP - 3527 EP - 3872 ER - TY - CHAP A1 - Baldermann, Andre A1 - Mittermayr, Florian A1 - Thumann, Maria A1 - Kusterle, Wolfgang T1 - Development of shotcrete with increased durability against thaumasite sulfate attack BT - Experiences from a tunnel site and laboratory tests T2 - ICCC 2019: 15th International Congress on Chemistry of Cement, 16.-20.09.2019, Prague, Czech Republik Y1 - 2019 SP - 3425 EP - 3435 ER - TY - JOUR A1 - Von Greve-Dierfeld, Stefanie A1 - Lothenbach, Barbara A1 - Vollpracht, Anya A1 - Wu, Bei A1 - Huet, Bruno A1 - Andrade, Carmen A1 - Medina, César A1 - Thiel, Charlotte A1 - Gruyaert, Elke A1 - Vanoutrive, Hanne A1 - Del Saéz Bosque, Isabel F. A1 - Ignjatovic, Ivan A1 - Elsen, Jan A1 - Provis, John L. A1 - Scrivener, Karen A1 - Thienel, Karl-Christian A1 - Sideris, Kosmas A1 - Zajac, Maciej A1 - Alderete, Natalia A1 - Cizer, Özlem A1 - Van den Heede, Philip A1 - Hooton, Robert Douglas A1 - Kamali-Bernard, Siham A1 - Bernal, Susan A. A1 - Zhao, Zengfeng A1 - Shi, Zhenguo A1 - De Belie, Nele T1 - Understanding the carbonation of concrete with supplementary cementitious materials BT - a critical review by RILEM TC 281-CCC JF - Materials and Structures N2 - Blended cements, where Portland cement clinker is partially replaced by supplementary cementitious materials (SCMs), provide the most feasible route for reducing carbon dioxide emissions associated with concrete production. However, lowering the clinker content can lead to an increasing risk of neutralisation of the concrete pore solution and potential reinforcement corrosion due to carbonation. carbonation of concrete with SCMs differs from carbonation of concrete solely based on Portland cement (PC). This is a consequence of the differences in the hydrate phase assemblage and pore solution chemistry, as well as the pore structure and transport properties, when varying the binder composition, age and curing conditions of the concretes. The carbonation mechanism and kinetics also depend on the saturation degree of the concrete and CO2 partial pressure which in turn depends on exposure conditions (e.g. relative humidity, volume, and duration of water in contact with the concrete surface and temperature conditions). This in turn influence the microstructural changes identified upon carbonation. This literature review, prepared by members of RILEM technical committee 281-CCC carbonation of concrete with supplementary cementitious materials, working groups 1 and 2, elucidates the effect of numerous SCM characteristics, exposure environments and curing conditions on the carbonation mechanism, kinetics and structural alterations in cementitious systems containing SCMs. KW - Transport properties KW - Environmental impact KW - Aggregate KW - Supplementary cementitious materials KW - Carbonations Y1 - 2020 U6 - https://doi.org/10.1617/s11527-020-01558-w VL - 53 SP - 1 EP - 34 PB - Springer Nature ER - TY - CHAP A1 - Schmailzl, Marc A1 - Linner, Thomas ED - Heese, Carl ED - Schütz, Sandra ED - Obergrießer, Stefanie T1 - ReduSys - Kontaktreduzierte Pflege durch multimodale Systeme, Robotik und digitales Bauen T2 - Die Nachhaltigkeitsziele der UN im Spiegel der Wissenschaft: Beispiele aus der Sozial- und Gesundheitsforschung N2 - Durch die fortschreitende Digitalisierung wird der klinische bzw. pflegerische Kontext zunehmend interdisziplinär. Im Zuge dessen wird die menschzentrierte und zugleich integrative Technologieentwicklung immer wichtiger um adäquate und reflektierte Systemlösungen für die Herausforderungen (z. B. demografischer Wandel, Fachkräftemangel etc.) von heute als auch morgen zu schaffen. In diesem Beitrag wird daher das Forschungsprojekt (BMBF-Projekt) ReduSys (Akronym: Kontaktreduzierte Pflege im klinischen Umfeld durch multimodale Systeme und Robotik) vorgestellt und die sozio-technischen Entwicklungen im Kontext der Nachhaltigkeit erörtert. ReduSys strebt eine ganzheitliche Systemlösung an, welche bestehend aus verschiedenen Technologien (z. B. Sensorik, IoT, Robotik VR etc.) den Übergang von der herkömmlichen zur kontaktreduzierten Pflege (z. B. bei pandemischen Situationen wie der Covid-19 Pandemie) ermöglichen soll. Durch den Technologieeinsatz (z. B. kontaktlos-kontinuierliche Vitalparametererfassung via Medical Smart Bed oder humanoide Robotik via ‚Robody‘ etc.) sollen Pflegekräfte nachhaltig entlastet und gleichzeitig eine bessere Patientenfürsorge gewährleistet werden. In diesem Zusammenhang bildet die Fakultät Bauingenieurwesen mit dem ‚Building Lab/Digitales Bauen‘ an der OTH Regensburg die Schnittstelle zwischen gebauter Umwelt und den eingesetzten digitalen und robotischen Technologien. Darüber hinaus wird der Systemansatz durch die weiteren Projektpartner komplementiert und kontinuierlich praxisnah validiert, um eine möglichst integrative Systemlösung zu gewährleisten. In diesem Beitrag wird auf die Entwicklung digitaler, als auch modularer Technologie als ‚Infill‘ für Gebäude bzw. Möbel seitens der OTH Regensburg eingegangen, um veranschaulichen zu können, wie mit gezielten technologischen Eingriffen ein signifikanter Mehrwert für die klinische bzw. pflegerische Umgebung geschaffen werden kann und simultan Aspekte der ökologischen, sozialen, wie auch wirtschaftlichen Nachhaltigkeit in die technische Entwicklung miteinfließen können KW - Kontaktreduzierte Pflege KW - Multimodale Systeme KW - Robotik KW - Sensorik Y1 - 2025 SN - 978-3-658-43333-8 U6 - https://doi.org/10.1007/978-3-658-43334-5_17 SN - 2731-8834 SP - 301 EP - 316 PB - Springer VS CY - Wiesbaden ER - TY - CHAP A1 - Karamara, Merve A1 - Bogdanski, Moritz-Ole A1 - Zöller, Raphael A1 - Albrecht, Sophie Viktoria A1 - Linner, Thomas A1 - Bock, Thomas A1 - Braml, Thomas T1 - Increasing efficiency and sustainability: A comparative analysis of concrete 3D printing and traditional methods based on case studies T2 - MATEC Web of Conferences N2 - At the forthcoming Concrete Solutions 2025 conference, the subject of concrete 3D printing will be explored in the “Case Studies” category, with a comparison to traditional methods. Concrete 3D printing offers several significant advantages, including the ability to create complex geometries, increased material efficiency, faster build times and cost savings. These are particularly important in the context of the current skilled labour shortage and emphasis on resource efficiency in construction. Nevertheless, challenges persist in the areas of machine reliability, process integration, and material adaptation to meet the requirements of 3D printing. The case studies will present modular and design-engineering-based strategies for the development of efficient, scalable automation solutions that integrate 3D printing into existing processes and allow for project-specific customisation through selective automation. These findings provide a robust framework for industrial applications that enhance efficiency and adaptability. By comparing concrete 3D printing to conventional methods, the insights offer a foundation for advancing automated production in construction, promoting scalable, resource-efficient, and economically sustainable practices that address the industry’s evolving demands. Y1 - 2025 U6 - https://doi.org/10.1051/matecconf/202540913005 N1 - Corresponding author der OTH Regensburg: Merve Karamara VL - 409 PB - EDP Sciences ER - TY - JOUR A1 - Sakoparnig, Marlene A1 - Galan, Isabel A1 - Steindl, Florian Roman A1 - Kusterle, Wolfgang A1 - Juhart, Joachim A1 - Grengg, Cyrill A1 - Briendl, Lukas G. A1 - Saxer, Andreas A1 - Thumann, Maria A1 - Mittermayr, Florian T1 - Durability of clinker reduced shotcrete: Ca2+ leaching, sintering, carbonation and chloride penetration JF - Materials and structures N2 - The reduction of clinker use is mandatory to lower the negative environmental impact of concrete. In shotcrete mixes, similarly to the case of conventional concrete, the use of supplementary cementitious materials (SCMs) and proper mix design allow for the substitution of clinker without compromising the mechanical properties. However, the impact of the substitution on the durability of shotcrete needs to be further assessed and understood. The results from the present study, obtained from real-scale sprayed concrete applications, show a reduction of the Ca2+ leaching and sintering potential of clinker-reduced shotcrete mixes due to the presence of SCMs. This positive effect, crucial for low maintenance costs of tunnels, is mainly related to a reduced portlandite content, which on the other hand negatively affects the carbonation resistance of shotcrete. Additionally, the hydration of SCMs positively influences the chloride penetration resistance presumably due to a combination of microstructural changes and changes in the chloride binding capacity. Differences found in the pore size distribution of the various mixes have low impact on the determined durability parameters, in particular compared to the effect of inhomogeneities produced during shotcrete application. KW - Carbonate precipitation KW - Carbonation KW - Chloride penetration KW - Durability KW - Leaching KW - Shotcrete Y1 - 2021 U6 - https://doi.org/10.1617/s11527-021-01644-7 VL - 54 SP - 1 EP - 23 PB - Springer Nature ER - TY - JOUR A1 - Steindl, Florian Roman A1 - Galan, Isabel A1 - Baldermann, Andre A1 - Sakoparnig, Marlene A1 - Briendl, Lukas G. A1 - Juhart, Joachim A1 - Thumann, Maria A1 - Dietzel, Martin A1 - Röck, Rudolf A1 - Kusterle, Wolfgang A1 - Mittermayr, Florian T1 - Sulfate durability and leaching behaviour of dry- and wet-mix shotcrete mixes JF - Cement and Concrete Research N2 - Shotcrete is a material frequently used in underground constructions such as tunnels, where Ca leaching and sulfate attack are important durability issues. In this study, two test methods were employed to investigate the sulfate resistance and leaching behaviour of dry- and wet-mix shotcretes in sulfate solutions on a time-resolved basis. Tests on powdered samples showed the dissolution of AFm, portlandite and C-A-S-H, subsequently followed by the precipitation of calcite and ettringite. The extent of sulfate expansion of drill cores corresponded to the chemical response of the powder materials, particularly on the reactivity of Ca- and Al-containing hydrated cement phases. The use of high-purity metakaolin (7-10 wt%) in the shotcrete binder significantly decreased the sulfate durability, while high amounts of other SCMs such as blast-furnace slag and silica fume (> 20 wt%) had a positive effect on the durability of shotcrete. KW - ADMIXTURES KW - ALKALI-FREE KW - ATTACK KW - BLAST-FURNACE SLAG KW - concrete KW - Durability KW - Leaching KW - MECHANISM KW - METAKAOLIN KW - RESISTANCE KW - SCMs KW - Shotcrete KW - Sulfate attack KW - TEMPERATURE KW - THAUMASITE FORM Y1 - 2020 U6 - https://doi.org/10.1016/j.cemconres.2020.106180 VL - 137 IS - November SP - 1 EP - 19 PB - Elsevier ER - TY - JOUR A1 - Galan, Isabel A1 - Briendl, Lukas G. A1 - Thumann, Maria A1 - Steindl, Florian A1 - Roeck, Rudolf A1 - Kusterle, Wolfgang A1 - Mittermayr, Florian T1 - Filler Effect in Shotcrete JF - Materials N2 - The effects of fine limestone powder on the early hydration of cementitious systems accelerated by means of alkali-free aluminum sulfate based products, commonly used for shotcrete applications, were investigated in the course of laboratory and real scale tests. In binary (CEM I + limestone) and ternary (CEM I + limestone + slag) systems the addition of fine limestone led to an enhancement of the hydration degree and strength development at early times (<24 h). The formation of ettringite, aluminate hydrates, and C-S-H is affected by the joint action of the setting accelerator and the fine limestone. Accelerator and limestone, in combination with the cement, can be optimized to enhance ettringite and silicate reaction, in some cases coupled with aluminate reaction inhibition, to produce mixes suitable for sprayed concrete applications. Such optimization can help to reduce the cement content in the mixes without compromising the early strength development of the shotcrete. KW - acceleration KW - ACCELERATORS KW - ALKALI-FREE KW - ALUMINUM SULFATE KW - CaCO3 KW - CALCIUM-CARBONATE KW - CEMENT HYDRATION KW - EARLY AGE HYDRATION KW - hydration KW - LIMESTONE POWDER KW - mechanical properties KW - PORTLAND-CEMENT Y1 - 2019 U6 - https://doi.org/10.3390/ma12193221 VL - 12 IS - 19 SP - 1 EP - 24 PB - MDPI CY - Basel ER - TY - CHAP A1 - Mittermayr, Florian A1 - Galan, Isabel A1 - Saade, Marcella Ruschi Mendes A1 - Saxer, Andreas A1 - Kusterle, Wolfgang T1 - "ASSpC" Shotcrete research for the needs of tomorrow T2 - ICCC 2019: 15th International Congress on the Chemistry of Cement, ICCC 2019, 16.-20.09.2019, Prague, Czech Republik N2 - Shotcrete or sprayed concrete in tunneling in connection with the "New Austrian Tunneling Method” has been developed over the last decades to reach a high quality standard. However, at present the development of new shotcrete mixes is required to fulfill durability and stainability requirements, i.e. for superior performance in aggressive environments and reduction of maintenance costs. In the course of the project ASSpC ("Advanced and sustainable sprayed concrete") the research team focuses on producing and testing new and innovative shotcrete mixes using local and environmentally friendly raw materials. Sustainable and durable shotcrete with optimized mechanical and physical properties and improved chemical resistance is developed. This paper outlines the motivation for the project, gives an overview of the project structure and introduces key reaction mechanisms and environmental controls causing damage of shotcrete in tunnels. Y1 - 2019 UR - https://iccc-online.org/fileadmin/gruppen/iccc/proceedings/ICCC15_2019.pdf SP - 3518 EP - 3872 ER - TY - JOUR A1 - Schermer, Detleff A1 - Meyer, Udo Joachim A1 - Lutman, Marjana A1 - Triller, Petra T1 - Shear tests on full scale storey-height specimens constructed with thermally insulating clay unit masonry with thin-layer mortar JF - Mauerwerk N2 - The paper presents results of a series of 6 in-plane shear tests on storey-height clay unit masonry panels [1] with thin-layer mortar, carried out in addition to previous test campaigns [2], [3], and [4]. The walls were constructed with unfilled thermally insulating clay units with a thermal conductivity of lambda = 0.09 W/(m . K). The current design rules for clay unit masonry according to DIN EN 1996-1-1/NA [5] are conservative compared to the presented test results for thermally insulating clay unit masonry. KW - clay units KW - design KW - in-plane shear KW - test methods KW - thin-layer mortar KW - WALLS Y1 - 2019 U6 - https://doi.org/10.1002/dama.201900025 SN - 1432-3427 VL - 23 IS - 6 SP - 378 EP - 386 PB - Ernst & Sohn ER - TY - CHAP A1 - Sakoparnig, Marlene A1 - Galan, Isabel A1 - Balderman, Andre A1 - Steindl, Florian A1 - Dietzel, Martin A1 - Thumann, Maria A1 - Saxer, Andreas A1 - Kusterle, Wolfgang A1 - Mittermayr, Florian T1 - Experimental Ca leaching of shotcrete & secondary precipitation T2 - ICCC 2019: 15th International Congress on the Chemistry of Cement, ICCC 2019, 16.-20.09.2019, Prague, Czech Republik Y1 - 2019 UR - https://iccc-online.org/fileadmin/gruppen/iccc/proceedings/ICCC15_2019.pdf SP - 3488 EP - 3495 ER - TY - CHAP A1 - Briendl, Lukas G. A1 - Galan, Isabel A1 - Steindl, Florian A1 - Röck, Rudolf A1 - Thumann, Maria A1 - Juhart, Joachim A1 - Baldermann, Andre A1 - Mittermayr, Florian A1 - Kusterle, Wolfgang T1 - Hydration processes of accelerated cementitious systems governing early strength development T2 - ICCC 2019: 15th International Congress on Chemistry of Cement, 16.-20.09.2019, Prague, Czech Republik Y1 - 2019 SP - 714 EP - 724 ER -