TY - RPRT A1 - Bergmeier, Sonja A1 - Bock, Maximilian A1 - Fischer, Lukas A1 - Flassig, Nathanael A1 - Hidvégi, Barnabás A1 - Bächer, Tim A1 - Hierl, Jonas A1 - Kaltenbach, Dominik A1 - Lackermeier, Florian A1 - Laubmann, Julia A1 - Liebl, Jonas A1 - Pirthauer, Tobias A1 - Reif, Robin A1 - Roider, Stefan ED - Fuhrmann, Thomas ED - Hipp, Susanne ED - Niemetz, Michael ED - Sterz, Oliver T1 - FMS-Berichte Wintersemester 2024/25 BT - Seminar zu aktuellen Themen der Elektro- und Informationstechnik T2 - FMS-Berichte Wintersemester 2024/25 N2 - Dieser Bericht entstand ursprünglich auf Initiative der Studierenden des damals neuen Masterstudiengangs „Elektro- und Informationstechnik (MEI)“ an der OTH Regensburg, die an der Pflichtlehrveranstaltung „Forschungsmethoden und Seminar (FMS)“ im Wintersemester 2020/21 teilnahmen. Diese Lehrveranstaltung hat das Ziel, systematisch an das wissenschaftliche Arbeiten, speziell die Wissenschaftskommunikation, heranzuführen. Daher ist im Laufe der Veranstaltung geeignete Literatur zu einem individuellen Thema zu recherchieren, sind Veröffentlichungen auf ihre Relevanz hin zu beurteilen und letztendlich gilt es eine eigene Ausarbeitung basierend auf der Literaturrecherche zu erstellen und diese in einem Vortrag zu präsentieren. Parallel dazu wird im Theorieteil die entsprechende Hinführung zu den verschiedenen Elementen der Wissenschaftskommunikation vermittelt: • Bedeutung der Wissenschaftskommunikation für die Arbeit der Ingenieure in Forschung und Entwicklung • Literaturrecherche, Suchmaschinen, Sichtung und Analyse vorhandener Publikationen, Bewertung der Qualität aufgefundener Fachliteratur, Auswahl geeigneter Materialien für die eigene Arbeit • Aufbereitung und Darstellung der recherchierten technischer Inhalte in Form einer seitenanzahlbegrenzten wissenschaftlichen Ausarbeitung • Einhalten formaler Randbedingungen bzgl. Strukturierung, einschl. Bildnachweise und Zitationsstile • Peer-review-Prozess bei wertschätzender Beurteilung der Leistung anderer • Publikumsangepasstes Aufbereiten komplexer fachlicher Inhalte mit hochschulöffentlicher Präsentation der Ergebnisse • Führen mündlicher wissenschaftlicher Diskurse Die präsentierten Themen beruhen nicht auf eigener Forschungstätigkeit, sondern sind als einführende Reviewartikel zum jeweiligen vorgegebenen technischen oder gesellschaftspolitischen Forschungsthema zu verstehen. T3 - Forschungsmethoden-Seminar - 9 KW - Elektrotechnik KW - Informationstechnik KW - Energietechnik KW - Literaturrecherche Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-83121 VL - 2024 IS - 9 CY - Regensburg ER - TY - JOUR A1 - Rauch, Johannes A1 - Brückl, Oliver T1 - Achieving Optimal Reactive Power Compensation in Distribution Grids by Using Industrial Compensation Systems JF - Electricity N2 - This paper presents a method for integrating industrial consumers owning compensation systems as alternative reactive power sources into grid operating processes. In remuneration, they receive a market-based provision of reactive power. The aim is to analyze the potential of reactive power compensation systems of industrial companies connected to medium-voltage (10 kV–30 kV) AC grids in order to increase the reactive power ability of distribution grids. Measurement methods and reactive power potential results of six industrial companies are presented to characterize the amount and temporal availability of their reactive power potential. The presented approach for using the decentralized reactive power potential is a centralized reactive power control method and is based on optimal power flow (OPF) calculations. An optimization algorithm based on linear programming is used to coordinate a reactive power retrieval tuned to the actual demand. The influencing quantities are the current grid status (voltage and load flow capacity reserves at grid nodes and power lines) and the current reactive power potential of the reactive power sources. The compensation impact of six measured industrial companies on an exemplary medium-voltage grid is shown by an application example. KW - Blindleistung KW - Blindleistungsmanagement KW - Industriebetriebe KW - Optimal Power Flow KW - Reactive Power Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-59139 N1 - Corresponding author: Johannes Rauch VL - 4 IS - 1 SP - 78 EP - 95 PB - MDPI CY - Basel ER - TY - CHAP A1 - Schweiberer, Philipp A1 - Rauch, Johannes A1 - Brückl, Oliver T1 - Control strategy for industrial reactive power sources depending on a specified reactive power setpoint value T2 - ETG Kongress 2023: Die Energiewende beschleunigen, 25.-26. Mai 2023, Kassel, Germany N2 - Industrial plants can provide reactive power (Q) for system- and grid-serving behavior, for which a functioning reactive power management system is essential. To make reactive power retrieval as efficient and safe as possible, the selection of reactive power sources to meet the Q-demand must consider their sensitivities and the restrictions of the industrial grid, such as operating equipment utilization or voltage limits. On this basis, a concept for a sensitivity-based control strategy that manages the reactive power retrieval of multiple reactive power sources depending on a predefined reactive power demand value is proposed. Based on the simulation of an industrial plant in the medium-voltage grid, which can provide reactive power in the form of industrial compensation systems (ICS) and generators, the operation of the algorithm is shown. Y1 - 2023 UR - https://ieeexplore.ieee.org/document/10173014/authors#authors SN - 978-3-8007-6108-1 SP - 553 EP - 558 PB - VDE VERLAG CY - Berlin ER - TY - JOUR A1 - Metsch, P. A1 - Schmidt, Henrik A1 - Sindersberger, Dirk A1 - Kalina, K. A. A1 - Brummund, J. A1 - Auernhammer, Günter A1 - Monkman, Gareth J. A1 - Kästner, Markus T1 - Field-Induced Interactions in Magneto-Active Elastomers BT - A Comparison of Experiments and Simulations JF - Smart Materials and Structures N2 - In this contribution, field-induced interactions of magnetizable particles embedded into a soft elastomer matrix are analyzed with regard to the resulting mechanical deformations. By comparing experiments for two-, three- and four-particle systems with the results of finite element simulations, a fully coupled continuum model for magneto-active elastomers is validated with the help of real data for the first time. The model under consideration permits the investigation of magneto-active elastomers with arbitrary particle distances, shapes and volume fractions as well as magnetic and mechanical properties of the individual constituents. It thus represents a basis for future studies on more complex, realistic systems. Our results show a very good agreement between experiments and numerical simulations—the deformation behavior of all systems is captured by the model qualitatively as well as quantitatively. Within a sensitivity analysis, the influence of the initial particle positions on the systems' response is examined. Furthermore, a comparison of the full three-dimensional model with the often used, simplified two-dimensional approach shows the typical overestimation of resulting interactions in magneto-active elastomers. Y1 - 2020 U6 - https://doi.org/10.1088/1361-665X/ab92dc N1 - Corrigendum: Field-induced interactions in magneto-active elastomers—a comparison of experiments and simulations (2020 Smart Mater. Struct. 29 085026); https://doi.org/10.1088/1361-665X/abb98b VL - 29 IS - 8 SP - 1 EP - 10 PB - IOPscience ER - TY - RPRT A1 - Caspar, Stefan A1 - Dorfner, Manuel A1 - Engelmann, Uwe A1 - Erhardsberger, Ludwig A1 - Gressitzek, Tobias A1 - Michelmann, Björn A1 - Steinberger, Melanie A1 - Stuchlý, Jan ED - Meier, Hans ED - Niemetz, Michael ED - Fuhrmann, Thomas ED - Reindl, Andrea T1 - FMS-Berichte Sommersemester 2023 BT - Seminar zu aktuellen Themen der Elektro- und Informationstechnik N2 - Dieser Bericht entstand ursprünglich auf Initiative der Studierenden des damals neuen Masterstudiengangs „Elektro- und Informationstechnik (MEI)“ an der OTH Regensburg, die an der Pflichtlehrveranstaltung „Forschungsmethoden und Seminar (FMS)“ im Wintersemester 2020/21 teilnahmen. Diese Lehrveranstaltung hat das Ziel, systematisch an das wissenschaftliche Arbeiten, speziell die Wissenschaftskommunikation, heranzuführen. Daher ist im Laufe der Veranstaltung geeignete Literatur zu einem individuellen Thema zu recherchieren, sind Veröffentlichungen auf ihre Relevanz hin zu beurteilen und letztendlich gilt es eine eigene Ausarbeitung basierend auf der Literaturrecherche zu erstellen und diese in einem Vortrag zu präsentieren. Parallel dazu wird im Theorieteil die entsprechende Hinführung zu den verschiedenen Elementen der Wissenschaftskommunikation vermittelt: • Bedeutung der Wissenschaftskommunikation für die Arbeit der Ingenieure in Forschung und Entwicklung • Literaturrecherche, Suchmaschinen, Sichtung und Analyse vorhandener Publikationen, Bewertung der Qualität aufgefundener Fachliteratur, Auswahl geeigneter Materialien für die eigene Arbeit • Aufbereitung und Darstellung der recherchierten technischer Inhalte in Form einer seitenanzahlbegrenzten wissenschaftlichen Ausarbeitung • Einhalten formaler Randbedingungen bzgl. Strukturierung, einschl. Bildnachweise und Zitationsstile • Peer-review-Prozess bei wertschätzender Beurteilung der Leistung anderer • Publikumsangepasstes Aufbereiten komplexer fachlicher Inhalte mit hochschulöffentlicher Präsentation der Ergebnisse • Führen mündlicher wissenschaftlicher Diskurse Die präsentierten Themen beruhen nicht auf eigener Forschungstätigkeit, sondern sind als einführende Reviewartikel zum jeweiligen vorgegebenen technischen oder gesellschaftspolitischen Forschungsthema zu verstehen. T3 - Forschungsmethoden-Seminar - 6 KW - Elektrotechnik KW - Informationstechnik KW - Energietechnik KW - Literaturrecherche Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-77787 IS - 1 CY - Regensburg ER - TY - JOUR A1 - Gärtner, Sebastian A1 - Rank, Daniel A1 - Heberl, Michael A1 - Gaderer, Matthias A1 - Dawoud, Belal A1 - Haumer, Anton A1 - Sterner, Michael T1 - Simulation and Techno-Economic Analysis of a Power-to-Hydrogen Process for Oxyfuel Glass Melting JF - Energies N2 - As an energy-intensive industry sector, the glass industry is strongly affected by the increasingly stringent climate protection targets. As established combustion-based production systems ensure high process stability and glass quality, an immediate switch to low greenhouse gas emission processes is difficult. To approach these challenges, this work investigates a step-by-step integration of a Power-to-Hydrogen concept into established oxyfuel glass melting processes using a simulation approach. This is complemented by a case study for economic analysis on a selected German glass industry site by simulating the power production of a nearby renewable energy park and subsequent optimization of the power-to-hydrogen plant performance and capacities. The results of this study indicate, that the proposed system can reduce specific carbon dioxide emissions by up to 60%, while increasing specific energy demand by a maximum of 25%. Investigations of the impact of altered combustion and furnace properties like adiabatic flame temperature (+25 °C), temperature efficiency (∆ξ = −0.003) and heat capacity flow ratio (∆zHL = −0.009) indicate that pure hydrogen-oxygen combustion has less impact on melting properties than assumed so far. Within the case study, high CO2 abatement costs of 295 €/t CO2-eq. were determined. This is mainly due to the insufficient performance of renewable energy sources. The correlations between process scaling and economic parameters presented in this study show promising potential for further economic optimization of the proposed energy system in the future. KW - Power-to-Gas KW - Hydrogen KW - Electrolysis KW - Oxyfuel KW - Glass Industry Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-22713 N1 - Corresponding author: Sebastian Gärtner VL - 14 IS - 24 PB - MDPI ER - TY - CHAP A1 - Grab, Robin A1 - Rauch, Johannes A1 - Götz, Rebekka A1 - Brückl, Oliver A1 - Eichner, Stefan A1 - Engel, Bernd T1 - Q-Dynamik: Blindleistungsstellgeschwindigkeiten im Verteilnetz T2 - Zukünftige Stromnetze: 27.-28. Januar 2021, 03.-04. Februar 2021, Tagungsunterlagen N2 - Mit der Energiewende geht eine starke Dezentralisierung der Energieeinspeisung einher. So sind im Deutschland des Jahres 2020 rund 31.000 Windenergieanlagen (WEA) in Betrieb, während bei der Solarenergie vor kurzem die zweimillionste Photovoltaik-Anlage (PVA) installiert wurde. Fast alle diese dezentralen Energieressourcen (DER) sind nach den Einspeiserichtlinien der Vergangenheit und der Gegenwart in der Lage, Blindleistung bereitzustellen, um die Spannung im Netz zu regeln und zum Blindleistungsausgleich beizutragen. Weitere potentielle dezentrale Blindleistungsquellen wie Blockheizkraftwerke, Kompensationsanlagen und perspektivisch sogar Verbraucher und Speicher sind im Verteilnetz zu finden. Durch den stetigen Rückbau konventioneller Großkraftwerke, welche dem Übertragungsnetz bisher als Blindleistungsquellen zur Verfügung standen, bedarf es einer Untersuchung mit der Fragestellung, in welchem Maß die neue Erzeugungslandschaft auch in diesem Feld als Ersatz dienen kann. Ein mögliches Hindernis für einen breitangelegten Einsatz von DER zu Zwecken des spannungsebenenübergreifenden Blindleistungsmanagements ist mangelndes Wissen über die Regeldynamik dieser verteilten Blindleistungsquellen. Übertragungs- und Verteilnetzbetreiber, die DER aktiv für Blindleistungsausgleich oder statische Spannungsregelung einsetzen, geben in der Regel ihre Blindleistungsanforderungen in kleineren Stufen mit erheblichen Latenzzeiten zwischen zwei Schritten weiter. Befürchtet wird, dass schnellere Sprünge in der Blindleistungsvorgabe zu instabilen Betriebszuständen oder anderweitigen Fehlfunktionen im Netz führen können. Eine genauere Kenntnis der dynamischen Fähigkeiten vorhandener Blindleistungsquellen sowie der Auswirkungen auf die Netzstabilität und den Netzschutz könnte dazu beitragen, die Geschwindigkeit der Blindleistungsbereitstellung zu optimieren und somit temporäre Spannungsschwankungen und -verluste zu minimieren und die Spannungsstabilität insgesamt zu verbessern. Durch eine entsprechende Regelungs- und Einsatzstrategie kann ein optimales Zusammenspiel der verschiedenen Technologien zur Deckung der Blindleistungsbedarfe für unterschiedliche Zeitbereiche erzielt werden. Hierfür ist eine genaue Kenntnis der Blindleistungsstellgeschwindigkeiten und des dynamischen Regelverhaltens erforderlich. Dieser Beitrag stellt dazu Ergebnisse aus dem Forschungsprojekt „Q-Integral“ vor. Um die relevanten Zeitkonstanten der Blindleistungsbereitstellung vollständig aufzuführen, werden zunächst typische Kommunikationszeiten für die Übermittlung von Sollwerten diskutiert. Anschließend werden Untersuchungen zu theoretischen und praktischen Reaktionszeiten verschiedener Blindleistungsquellen vorgestellt. Dafür werden verschiedene Technologien wie Umrichter für PVA, Batteriespeicher und WEA sowie Synchrongeneratoren, die bei thermischen Kraftwerken die dominierende Technologie sind, betrachtet. Abschließend werden diese Werte mit realen Blindleistungsstellgeschwindigkeiten von ausgedehnten Wind- und Solarkraftwerken verglichen. KW - Blindleistung KW - Blindleistungsmanagement KW - Q-Dynamik KW - Blindleistungsquellen KW - Verteilungsnetz Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-58762 SN - 978-3-948176-12-9 SP - 46 EP - 55 PB - Conexio-PSE GmbH CY - Pforzheim ER - TY - CHAP A1 - Rauch, Johannes A1 - Brückl, Oliver T1 - Konzeptionierung netzplanerischer Prozessansätze zur Ermittlung von Blindleistungskapazitäten zum Ausgleich des Blindleistungsbedarfs in einer Netzregion T2 - Tagungsband Tagung Zukünftige Stromnetze 26./27. Januar 2022 (online) N2 - Um einen sicheren und zuverlässigen Stromnetzbetrieb zu gewährleisten, muss die Spannung im Grundfall als auch bei ungeplanten Ausfällen in definierten Bereichen gehalten werden. Im Übertragungsnetz wird hierfür bisher Blindleistung hauptsächlich aus Blindleistungskompensationsanlagen und konventionellen Großkraftwerken eingesetzt. Zukünftig wird nach §12h EnWG eine marktgestützte Beschaffung dieser Dienstleistung zur Spannungsregelung vorgeschrieben. Zugleich verändert sich der Blindleistungsbedarf der Netzbetriebsmittel durch die Integration erneuerbarer Energieanlagen und der Elektromobilität sowie durch den Netzausbau bei Übertragungs- und Verteilungsnetzbetreibern. Es bedarf somit angepasster Netzbetriebs- und Netzplanungskonzepte für ein technisch effizientes und wirtschaftlich günstiges Blindleistungsmanagement. Dieser Beitrag beschäftigt sich damit, Prozessansätze und Methodiken für ebendieses in der Netzplanung aufzuzeigen, um erforderliche Blindleistungskapazitäten unter minimalen Gesamtkostenaufwand und unter Berücksichtigung einer effizienten Blindleistungsbedarfsdeckung zu bestimmen. Dabei liegt der Fokus verstärkt in der Bedarfsanalyse. KW - Blindleistung KW - Blindleistungsmanagement KW - Netzplanungsprozesse KW - Spannungshaltung KW - Optimierungsverfahren Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-58665 SN - 978-3-948176-16-7 SP - 117 EP - 126 PB - Conexio-PSE GmbH CY - Pforzheim ER - TY - CHAP A1 - Rauch, Johannes A1 - Brückl, Oliver T1 - Analysis of the correlation behavior between local available information to the overall reactive power of a medium-voltage grid group T2 - Applied Research Conference - ARC 2017, 7 July 2017 München N2 - The initiated energy transition leads to extensive changes in the supply of energy. The increasing use of renewable energy causes a shift of the produced power from centralized conventional power plants to decentralized energy plants. Because of this redistribution and the related change of load-flows, new challenges and problems for distribution system operators appear. This includes the integration of new loads and plants into the existing power grid and the guarantee of a high supply security and quality. It also includes strengthened requirements for the use and provision of reactive power. The project “SyNErgie” (“Systemoptimierendes Netz- und Energiemanagement für Verteilungsnetze der Zukunft“) deals with the development of a new reactive power management, which gets embedded in grid planning and controlling processes. One focus of the project is on the integration of decentralized energy plants (DEPs) to the reactive power management. The aim is to develop a decentralized and self-sufficient reactive power control system, which only works with local available information (measures). Therefore is no necessity of a complex communication system to the grid control center. Self-controlled Q-controller in the DEPs get characteristic curves and control the reactive power sources with local measurements (e.g. current, voltage, effective power). This new reactive power control management aims for the reactive power compensation in order to increase the integration capacity of loads and plants in a grid [2]. In order to generate characteristic curves for DEPs, it is necessary to analyze the correlation behavior between the local available measurements at the DEPs and the overall-Q-behavior of the grid group at the transformer. In that regard, influencing quantities should be considered. The aim is to involve und evaluate all relevant influencing quantities in order to determine energy plants and certain operating points, in which the correlation behavior and the prediction for the overall-Q-behavior are sufficient. The next step is to develop a model that fits these correlation behaviors and generate characteristic curves. One method to generate characteristic curves for the Q-controllers is regression analysis. The developed Q-control-system with the characteristic curves will be tested, evaluated and optimized in a following field test in cooperation with distribution system operators. KW - Mittelspannungsnetz KW - Blindleistungsmanagement KW - Blindleistung KW - Integration Erneuerbare Energien KW - Potentialerschließung Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-58712 SP - 224 EP - 230 CY - München ER - TY - CHAP A1 - Schweiberer, Philipp A1 - Rauch, Johannes A1 - Brückl, Oliver T1 - Entwicklung eines Regelkonzeptes für einen optimierten Blindleistungsabruf auf Basis von Blindleistungspotentialanalysen bei Industriebetrieben im Mittelspannungsnetz T2 - Tagungsband Tagung Zukünftige Stromnetze 26./27. Januar 2022 (online) N2 - Im Zuge der Energiewende ergibt sich ein Wandel in der Struktur des Elektrizitätsversorgungsnetzes. Die Verschiebung der Erzeugungsleistung von konventionellen Großkraftwerken in höheren Netzebenen hin zu dezentralen erneuerbaren Energieanlagen in niedrigeren Netzebenen resultiert sowohl in bidirektionalen Lastflüssen als auch in schwankenden Einspeisecharakteristiken. Des Weiteren folgen durch den Wegfall von Großkraftwerken als Blindleistungsquellen Leistungsdefizite in der Übertragungsnetzebene, die kompensiert werden müssen. Daraus resultieren Herausforderungen an einen sicheren und zuverlässigen Betrieb der Verteil- und Übertragungsnetze. Neue Konzepte müssen für die Erbringung von Blindleistung entwickelt werden, es soll mehr Blindleistung aus dem Verteilungsnetz zur Verfügung gestellt werden, um die Systemstabilität zu wahren. Im Rahmen des Projektes Q-Integral wird das Thema „Blindleistung“ (Q) ganzheitlich untersucht. Es werden dazu verschiedene Erbringungsoptionen für Blindleistung hinsichtlich technischer und wirtschaftlicher Potentiale untersucht, die in ein funktionales und effizientes Blindleistungsmanagement eingebracht werden. Die Untersuchungsansätze dafür sind sowohl spannungsebenen-übergreifend als auch netzbetreiber-übergreifend. Ein Ansatzpunkt des Projektes ist die Betrachtung der Blindleistungsbereitstellung von Industriebetrieben. Dazu wird das Potential von Betrieben, die an das Verteilnetz angeschlossen sind und Blindleistung durch Kompensations- oder Erzeugungsanlagen bereitstellen können, untersucht. Ziel ist es, das gesicherte und maximale induktive sowie kapazitive Potential zu bestimmen. Das gesicherte kapazitive Potential kann genutzt werden, um Aussagen darüber zu treffen, wie stark dem Spannungsfall im vorgelagerten Netz zu Starklastzeiten entgegengewirkt werden kann. Anhand des gesicherten induktiven Potentials kann ein Spannungsanstieg während Schwachlastzeiten ausgeglichen werden kann. In diesem Beitrag werden Ergebnisse aus dem Projekt Q-Integral vorgestellt. Dazu werden zuerst die Berechnungsgrundlagen der induktiven und kapazitiven Blindleistungspotentiale aufgezeigt und die Ergebnisse der Berechnungen vorgestellt. Die gewonnen Ergebnisse entstammen aus Messungen an einem Industriebetrieb mit Blindleistungskompensationsanlagen (BKA), den entsprechenden Reglern der Anlagen und einer installierten Kompensationsleistung von 1600 kvar. Sowohl die Lastgänge als auch das Schaltverhalten der einzelnen Kompensationsanlagen liegen den Berechnungen zugrunde. Um den Austausch der Blindleistung an der Übergabestelle des Betriebs zum Mittelspannungsnetz netzdienlich einzustellen, bedarf es eines geeigneten Regelkonzepts, das neben den BKAs auch weitere Q-Quellen berücksichtigt. Deshalb wird abschließend ein Regelkonzept vorgestellt, das den technisch-optimierten Blindleistungsabruf unter Berücksichtigung mehrerer Blindleistungsquellen behandelt. KW - Blindleistung KW - Blindleistungsmanagement KW - Blindleistungsquellen KW - Blindleistungspotentiale KW - Industriebetriebe Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-58704 SN - 978-3-948176-16-7 SP - 224 EP - 233 PB - Conexio-PSE GmbH CY - Pforzheim ER - TY - CHAP A1 - Rauch, Johannes A1 - Brückl, Oliver A1 - Engel, Bernd ED - Schulz, Detlef T1 - Analysis and optimization of the steady state voltage deviation demand for reactive power planning using installed reactive power sources T2 - NEIS 2022; Conference on Sustainable Energy Supply and Energy Storage Systems, 26-27 September 2022, Hamburg N2 - The provision of reactive power is one option for maintaining the grid voltage, that is defined as an ancillary service in Germany. This paper presents an approach for determining deficient voltage deviation demands within an electrical grid for long term reactive power planning investigations. In contrast to previous approaches, which evaluate the Q-behavior of extended ward elements or grid assets, voltage deviations are analyzed bus-specifically. So further reactive power planning investigations are able to scale and optimize additional reactive power sources directly on planning voltage limits using load flow sensitivity techniques. The focus lies on the analysis of the steady state demand at base case conditions. Therefore, a grid planning process is conceptualized. An optimal power flow algorithm based on Differential Evolution is used for an optimal reactive power dispatch of installed reactive power sources, e. g. reactive power compensation systems or (renewable) energy sources to minimize the total voltage deviation according to voltage limits of Transmission System Operators planning principles. Methodological and processuals specifications as well as an application use case with an exemplary transmission system are presented in this paper. KW - Reactive Power KW - Reactiver Power Planning KW - Voltage Control KW - Optimal Power Flow KW - Differential Evolution Y1 - 2022 UR - https://ieeexplore.ieee.org/document/10048083 SN - 978-3-8007-5983-5 SN - 2510-6902 SP - 175 EP - 182 PB - VDE-Verlag CY - Berlin ER - TY - CHAP A1 - Schweiberer, Philipp A1 - Rauch, Johannes A1 - Brückl, Oliver ED - Schulz, Detlef T1 - Long-term analysis of industrial reactive power potentials with consideration of plant-internal grid restrictions using the example of an industrial plant in a distribution grid T2 - NEIS 2022; Conference on Sustainable Energy Supply and Energy Storage Systems, 26-27 September 2022, Hamburg N2 - Since conventional generation plants provide a considerable share of reactive power but are gradually being shut down due to energy transition, leading to power deficits at the transmission grid level, new concepts for the supply of reactive power must be developed. As one possibility for the latter, industrial plants in the distribution grid are considered suitable, as their reactive power potentials can contribute to voltage maintenance and thus to a grid- or system-serving behavior. In this paper, the determination of reactive power potentials provided by industrial compensation systems (ICS) is presented. An industrial plant in the medium voltage grid, with three installed ICSs, is investigated. The potentials are determined and described based on their time characteristics, which provide information about the occurrence and distribution of inductive and capacitive potentials. A grid simulation of the investigated industrial grid is used to analyze the effects of retrieving the reactive power potentials regarding equipment utilizations and voltage limits. KW - Reactive Power KW - Reactive Power Potentials KW - Industrial plant KW - Voltage Stability KW - Long term analysis Y1 - 2022 UR - https://ieeexplore.ieee.org/document/10048065 SN - 978-3-8007-5983-5 SN - 2510-6902 SP - 51 EP - 56 PB - VDE-Verlag CY - Berlin ER - TY - RPRT A1 - Brixner, Luis A1 - Gnerlich, Patrick A1 - Jakob, Jonas A1 - Kiener, Johannes A1 - Oberländer, Jonas A1 - Plößl, Moritz A1 - Schächinger, Stefan A1 - Stelz, Raphael A1 - Wartner, Felix ED - Fuhrmann, Thomas ED - Niemetz, Michael ED - Reindl, Andrea T1 - FMS-Berichte Wintersemester 2023/24 BT - Seminar zu aktuellen Themen der Elektro- und Informationstechnik N2 - Dieser Bericht entstand ursprünglich auf Initiative der Studierenden des damals neuen Masterstudiengangs „Elektro- und Informationstechnik (MEI)“ an der OTH Regensburg, die an der Pflichtlehrveranstaltung „Forschungsmethoden und Seminar (FMS)“ im Wintersemester 2020/21 teilnahmen. Diese Lehrveranstaltung hat das Ziel, systematisch an das wissenschaftliche Arbeiten, speziell die Wissenschaftskommunikation, heranzuführen. Daher ist im Laufe der Veranstaltung geeignete Literatur zu einem individuellen Thema zu recherchieren, sind Veröffentlichungen auf ihre Relevanz hin zu beurteilen und letztendlich gilt es eine eigene Ausarbeitung basierend auf der Literaturrecherche zu erstellen und diese in einem Vortrag zu präsentieren. Parallel dazu wird im Theorieteil die entsprechende Hinführung zu den verschiedenen Elementen der Wissenschaftskommunikation vermittelt: • Bedeutung der Wissenschaftskommunikation für die Arbeit der Ingenieure in Forschung und Entwicklung • Literaturrecherche, Suchmaschinen, Sichtung und Analyse vorhandener Publikationen, Bewertung der Qualität aufgefundener Fachliteratur, Auswahl geeigneter Materialien für die eigene Arbeit • Aufbereitung und Darstellung der recherchierten technischer Inhalte in Form einer seitenanzahlbegrenzten wissenschaftlichen Ausarbeitung • Einhalten formaler Randbedingungen bzgl. Strukturierung, einschl. Bildnachweise und Zitationsstile • Peer-review-Prozess bei wertschätzender Beurteilung der Leistung anderer • Publikumsangepasstes Aufbereiten komplexer fachlicher Inhalte mit hochschulöffentlicher Präsentation der Ergebnisse • Führen mündlicher wissenschaftlicher Diskurse Die präsentierten Themen beruhen nicht auf eigener Forschungstätigkeit, sondern sind als einführende Reviewartikel zum jeweiligen vorgegebenen technischen oder gesellschaftspolitischen Forschungsthema zu verstehen. T3 - Forschungsmethoden-Seminar - 7 KW - Elektrotechnik KW - Informationstechnik KW - Energietechnik KW - Literaturrecherche Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-77796 IS - 1 CY - Regensburg ER - TY - RPRT A1 - Blößer, Julia A1 - Branilovic, Fabio A1 - Michael, Bretz A1 - Ebner, Andreas A1 - Gleich, Ralf A1 - Inderst, Christian A1 - Kopp, Lorenz A1 - Müller, Markus A1 - Schächiner, Michael A1 - von Beerfelde, Rebekka ED - Fuhrmann, Thomas ED - Niemetz, Michael ED - Reindl, Andrea T1 - FMS-Berichte Sommersemester 2024 BT - Seminar zu aktuellen Themen der Elektro- und Informationstechnik T2 - FMS-Berichte Sommersemester 2024 N2 - Dieser Bericht entstand ursprünglich auf Initiative der Studierenden des damals neuen Masterstudiengangs „Elektro- und Informationstechnik (MEI)“ an der OTH Regensburg, die an der Pflichtlehrveranstaltung „Forschungsmethoden und Seminar (FMS)“ im Wintersemester 2020/21 teilnahmen. Diese Lehrveranstaltung hat das Ziel, systematisch an das wissenschaftliche Arbeiten, speziell die Wissenschaftskommunikation, heranzuführen. Daher ist im Laufe der Veranstaltung geeignete Literatur zu einem individuellen Thema zu recherchieren, sind Veröffentlichungen auf ihre Relevanz hin zu beurteilen und letztendlich gilt es eine eigene Ausarbeitung basierend auf der Literaturrecherche zu erstellen und diese in einem Vortrag zu präsentieren. Parallel dazu wird im Theorieteil die entsprechende Hinführung zu den verschiedenen Elementen der Wissenschaftskommunikation vermittelt: • Bedeutung der Wissenschaftskommunikation für die Arbeit der Ingenieure in Forschung und Entwicklung • Literaturrecherche, Suchmaschinen, Sichtung und Analyse vorhandener Publikationen, Bewertung der Qualität aufgefundener Fachliteratur, Auswahl geeigneter Materialien für die eigene Arbeit • Aufbereitung und Darstellung der recherchierten technischer Inhalte in Form einer seitenanzahlbegrenzten wissenschaftlichen Ausarbeitung • Einhalten formaler Randbedingungen bzgl. Strukturierung, einschl. Bildnachweise und Zitationsstile • Peer-review-Prozess bei wertschätzender Beurteilung der Leistung anderer • Publikumsangepasstes Aufbereiten komplexer fachlicher Inhalte mit hochschulöffentlicher Präsentation der Ergebnisse • Führen mündlicher wissenschaftlicher Diskurse Die präsentierten Themen beruhen nicht auf eigener Forschungstätigkeit, sondern sind als einführende Reviewartikel zum jeweiligen vorgegebenen technischen oder gesellschaftspolitischen Forschungsthema zu verstehen. T3 - Forschungsmethoden-Seminar - 8 KW - Elektrotechnik KW - Informationstechnik KW - Energietechnik KW - Literaturrecherche Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-77801 IS - 1 CY - Regensburg ER - TY - RPRT A1 - Rank, Daniel A1 - Heberl, Michael A1 - Sterner, Michael T1 - Die CO2-Bilanz der OTH [Ostbayerischen Technische Hochschule Regenburg] BT - Tool für Hochschulen und Firmen Y1 - 2020 UR - https://sae58cb7e2208a3d2.jimcontent.com/download/version/1613400473/module/9240277976/name/1. Sitzung AG_Präsentation Prof. Sterner-1.pdf ER - TY - JOUR A1 - Chatzitakis, Paris A1 - Safarov, Javid A1 - Opferkuch, Frank A1 - Dawoud, Belal T1 - Experimental investigation of an absorption heat pump with organic working pairs JF - Applied Thermal Engineering N2 - As part of a systematic approach towards the search for alternative absorption heat pump (AHP) working pairs that could potentially provide comparable performance to conventional ones, a previous work performed a detailed theoretical cycle analysis and simulation that revealed concrete correlations between key working fluid thermophysical properties and AHP performance indicators. Following this work, targeted combinations of two organic refrigerants, 2,2,2-trifluoroethanol (TFE) and 2,2,3,3,3-pentafluoropropanol (5FP) and two organic absorbents, 1,3-dimethyl-2-imidazolidinone (DMI) and 2-pyrrolidone (PYR) were tested in a prototype 5 kW AHP, based on a highly compact plate heat exchanger design, which has been previously introduced. The purpose of this effort was to test the findings of the previous work with experimental measurements. The working pair combinations were also subjected to vapor liquid equilibrium (VLE) and viscosity measurements, in order to determine reliable activity coefficient and improve the accuracy of the simulations. The experimental performance data agree well with the COP simulations and show to be consistent with the conclusions derived from the previous theoretical work. KW - Absorption heat pump KW - Coefficient of performance KW - FLUID KW - MIXTURES KW - Organic working pairs KW - Specific solution circulation Y1 - 2019 U6 - https://doi.org/10.1016/j.applthermaleng.2019.114311 VL - 163 IS - December PB - Elsevier ER - TY - JOUR A1 - Hansen, B. A1 - Hoebler, Michael A1 - Purr, Stephan A1 - Meinhardt, J. A1 - Merklein, Marion T1 - Basics for inline measurement of tribological conditions in series production of car body parts JF - IOP Conference Series: Materials Science and Engineering N2 - The quality of car body parts in series production is strongly dependent on the tribological behavior. Fluctuating material properties such as the sheet roughness and the amount of lubricant have an influence on the forming process. On the basis of large amounts of data it is possible to investigate the friction behavior in series production and to make process adjustments if required. Therefore, inline measurement systems have a great potential to detect the sheet roughness during the cutting process of blanks in the coil line. Furthermore, contactless systems are advantageous as they do not damage the surface. Nevertheless, the optical measuring is influenced by the lubricant layer on top of the surface. Therefore, the previously unknown impact of the lubricant on the measuring result is investigated. Within this study, stationary optical roughness measurements have been conducted using different amounts of lubricant on hot-dip galvanized EDT steel. The results demonstrate the influence of different amounts of lubricant on the sheet roughness measurement. Hence, it is possible to correct the inline measuring results and gain knowledge of fluctuating surface roughness. In addition, strip drawing test has been carried out to investigate the effect of fluctuating tribological conditions. Y1 - 2019 U6 - https://doi.org/10.1088/1757-899x/651/1/012050 VL - 651 PB - IOP Publishing ER - TY - CHAP A1 - Bresinsky, Markus A1 - Reusner, Florian T1 - GLOBE – Learn and Innovate Digitization by a Virtual Collaboration Exercise and Living Lab T2 - Interactivity, Game Creation, Design, Learning, and Innovation. 6th International Conference, ArtsIT 2017, and Second International Conference, DLI 2017, Heraklion, Crete, Greece, October 30–31, 2017, Proceedings N2 - This paper presents an advanced interactive learning platform .dot that implements the GLOBE exercise, using innovative information and communication technologies to enhance learning and development of management and leadership skills in a complex organizational setting. GLOBE on the one hand focuses on competences around ICT and virtual collaboration, and on the other hand on digital transformation, technologies and tools at higher education institutions. By this applied science, learning and developing on the real-world platform, analysis and drive of digital innovation and transformation can be fostered. The main goal is to co-create knowledge and solutions in the following focused subjects: Management and leadership of multidisciplinary, multinational and multicultural virtual and real collaboration in a complex organizational environment. GLOBE uses real world scenarios (e.g. United Nations mission) and involves real world actors. This comprehensive educational approach should enhance learning techniques and leverage learning progress with hands-on experiences and applied science in the context of ICT and virtual collaboration, and the embodied dynamics of behavior to support innovation and development. KW - Digitization KW - Experiential learning KW - Human factors KW - ICT KW - Interactive and collaborative learning KW - Living Lab KW - Open innovation KW - Problem-based learning KW - Virtual collaboration Y1 - 2018 U6 - https://doi.org/10.1007/978-3-319-76908-0_26 SP - 273 EP - 281 PB - Springer Nature ER - TY - JOUR A1 - Hofrichter, Andreas A1 - Rank, Daniel A1 - Heberl, Michael A1 - Sterner, Michael T1 - Determination of the optimal power ratio between electrolysis and renewable energy to investigate the effects on the hydrogen production costs JF - International Journal of Hydrogen Energy N2 - Green hydrogen via renewable powered electrolysis has a high relevance in decarbonization and supply security. Achieving economically competitive hydrogen production costs is a major challenge in times of an energy price crisis. Our objective is to show the economically optimal installed capacity of electrolysers in relation to wind and solar power so swift and credible statements can be made regarding the system design. The ratio between renewable generation and electrolysis power as well as scaling effects, operating behaviour and development of costs are considered. Hydrogen production costs are calculated for four exemplary real PV and wind sites and different ratios of electrolysis to renewable power for the year 2020. The ideal ratio for PV systems is between 14% and 73% and for wind between 3.3% and 143% for low and high full load hours. The lowest hydrogen production costs are identified at 2.53 €/kg for 50 MW wind power and 72 MW electrolysis power. The results provide plant constructors the possibility to create a cost-optimized design via an optimum ratio of electrolysis to renewable capacity. Therefore, the procedures for planning and dimensioning of selected systems can be drastically simplified. Y1 - 2023 U6 - https://doi.org/10.1016/j.ijhydene.2022.09.263 SN - 0360-3199 N1 - Corresponding author: Michael Heberl N1 - Corrigendum to “Determination of the optimal power ratio between electrolysis and renewable energy to investigate the effects on the hydrogen production costs” [Int J Hydrogen Energy 48 (5) (2023) 1651–1663] - https://doi.org/10.1016/j.ijhydene.2023.03.128 VL - 48 IS - 5 SP - 1651 EP - 1663 PB - Elsevier ER - TY - CHAP A1 - Gärtner, Sebastian A1 - Rank, Daniel A1 - Heberl, Michael A1 - Gaderer, Matthias A1 - Sterner, Michael T1 - Integration of Power-To-Methane into Glass Melting Processes T2 - Proceedings of the International Renewable Energy Storage Conference (IRES 2022) N2 - The glass industry is facing increased challenges regarding climate protection targets and rising energy costs. The integration of renewable energy including conversion and storage is a key for both challenges in this energy-intensive industrial sector, which has been mainly relying on fossil gas so far. The options considered to this point for reducing CO2 emissions and switching to a renewable energy supply involve far-reaching changes of the established melting processes. This entails significant risks in terms of influences on glass quality and stable production volumes. The presented approach for the integration of a Power-to-Methane (PtM) system into the glass industry is a completely new concept and has not been considered in detail before. It allows the use of established oxyfuel melting processes, the integration of fluctuating renewable energy sources and a simultaneous reduction of CO2 emissions by more than 78%. At the same time, natural gas purchases become obsolete. A techno-economic evaluation of the complete PtM process shows, that 1,76 €/m3 or 1,26 €/kg synthetic natural gas are possible with renewable energy supply. Using electricity from the energy grid would require electricity prices < 0,126 €/kWh to allow cost competitive PtM processes in the glass industry. Such electricity prices could be achieved by electricity market-based optimization and operation of the PtM system. This operation strategy would require AI-based algorithms predicting availabilities and prices on future-based markets. KW - Power-to-Gas KW - Methanation KW - Glass Melting KW - Glass Industry KW - Decarbonisation Y1 - 2023 U6 - https://doi.org/10.2991/978-94-6463-156-2_12 SN - 2589-4943 VL - 16 SP - 147 EP - 161 PB - Atlantis Press ER - TY - CHAP A1 - Tremmel, Florian A1 - Nagler, Oliver A1 - Kutter, Christoph A1 - Holmer, Rainer T1 - Smart Cantilever Probe with Integrated Force and Acoustic Emission Sensor T2 - 2023 IEEE SENSORS, Vienna, Austria, 10/29/2023 - 11/1/2023 N2 - Acoustic emission (AE) testing recently found its application in the wafer testing sector of the semiconductor industry. To find out the mechanical robustness of semiconductor devices, contact pads on the chip surface are intentionally overstressed with an indenter tip and the appearing oxide cracks are detected with help of the generated AE signals. This is done in a customized test bench with a patented sensor-indenter system. This paper presents an improved version of the measurement setup that solves certain disadvantages of it and can be used in a standard wafer prober. The main components of the developed sensor system are a strain gauge for contact force measurement and a piezoelectric sensor element for AE signal detection. Both components are integrated on a cantilever beam which has an exchangeable indenter tip at its free end. The cantilever probe is electrically conductive to enable electrical tests via the indenter tip. This smart sensor-cantilever combination (SCC) can be mounted with several adapter components on a carrier plate to place it in a wafer prober. For both sensor elements amplifier circuits are developed to enhance their signal-to-noise ratios (SNRs). A prototype setup is shown together with simulated and experimental results to demonstrate its performance. The mechanical properties of the cantilever, as well as the force sensor and the AE crack signals, already fulfill the requirements for an implementation in a wafer prober. To further improve the sensor resolutions and detection limits, several optimizations regarding the design of the SCC are in progress. KW - Acoustic emission testing KW - piezoelectric sensor KW - strain gauge KW - operational amplifier circuit Y1 - 2023 SN - 979-8-3503-0387-2 U6 - https://doi.org/10.1109/SENSORS56945.2023.10325021 SP - 1 EP - 4 PB - IEEE ER - TY - INPR A1 - Heberl, Michael A1 - Withelm, Christian A1 - Kaul, Anja A1 - Rank, Daniel A1 - Sterner, Michael T1 - Prospective Life Cycle Assessment of Biological Methanation in a Trickle-Bed Pilot Plant and a Potential Scale-Up N2 - In this study, a pilot-scale trickle-bed reactor for biological methanation and various scale-up scenarios for 2023 and 2050 were investigated using LCA. A best- and worst-case scenario for technology development until 2050 was evolved using cross consistency analysis and morphological field, based on which the data for the ecological models were determined.The results show that the plant scale-up has a very positive effect on the ecological consequences of methanation. In the best-case scenario, the values are a factor of 23-780 lower than those of the actual plant today. A hot-spot analysis showed that especially electrolysis operation has a large impact on total emissions. The final Monte-Carlo simulation shows that the technology is likely to achieve a low GWP with a median of 104.0 kg CO2-eq / MWh CH4. Y1 - 2023 U6 - https://doi.org/10.2139/ssrn.4635066 N1 - Der Aufsatz wurde peer-reviewd veröffentlich und ist ebenfalls in diesem Repositorium verzeichnet unter: https://opus4.kobv.de/opus4-oth-regensburg/frontdoor/index/index/docId/7349 PB - SSRN ER - TY - CHAP A1 - Rill, Georg ED - Apetaur, Milan T1 - Vehicle Dynamics in Real-Time Simulation T2 - The dynamics of vehicles on roads and on tracks N2 - This paper presents some ideas on a new concept, named COMPACT (Computer Simulation of Passenger Cars and Trucks). COMPACT was developed for the mathematical description of vehicles in all driving situations. As COMPACT is completely adopted to the particular problems in road vehicle dynamics, it results in a computer code where execution time is minimized. Thus, even real-time application at the Daimler-Benz driving simulator is possible. Previous Chapter Next Chapter Y1 - 2021 SN - 9781003210894 U6 - https://doi.org/10.1201/9781003210894-40 SP - 337 EP - 347 PB - CRC Press CY - Boca Raton ER - TY - INPR A1 - Meisinger, Alexander A1 - Hofrichter, Andreas A1 - Bauer, Franz A1 - Sterner, Michael T1 - Unlocking Potential Energy Partnerships in Europe: a Case Study on the Way to a Franco-German Energy Transition N2 - Global warming is already causing global destabilization. Geopolitical challenges fuel this instability and highlight the need for trusted energy partnerships to ensure energy security. To limit global warming and increase energy security, it is essential to take joint action on an international and global scale. The European Green Deal contributes to this. However, specific national actions are still needed. This research presents a way forward for a Franco-German energy transition and unlocks the potential of energy partnerships within Europe, using a cost-based, sector-coupled optimization model. Both countries are coupled via an isolated country optimization approach. Thus, the focus is on the development of each national energy system. The results highlight the increase of energy security in line with the European Green Deal. The main pillars of the energy transition are solar energy (32- 33%), wind energy (25-38%) and biogenic energy sources (13-27%). Nuclear power is being phased out in Germany and France. The results show that a Franco-German energy partnership has great potential. Overall, France can cost-effectively cover 25% of Germany’s hydrogen import needs (122 TWh) in 2050. At the same time, France can also benefit from the energy partnership in terms of economic growth and joint action to mitigate climate crisis. KW - Decarbonization KW - Energy partnership KW - Energy system modelling KW - Energy transition KW - European Green Deal KW - Power-to-X Y1 - 2025 U6 - https://doi.org/10.2139/ssrn.5251699 PB - SSRN ER - TY - JOUR A1 - Romeis, Dirk A1 - Kostrov, Sergei A. A1 - Kramarenko, Elena Yu A1 - Stepanov, Gennady V. A1 - Shamonin (Chamonine), Mikhail A1 - Saphiannikova, Marina T1 - Magnetic-field-induced stress in confined magnetoactive elastomers JF - Soft Matter N2 - We present a theoretical approach for calculating the state of stress induced by a uniform magnetic field in confined magnetoactive elastomers of arbitrary shape. The theory explicitly includes the magnetic field generated by magnetizable spherical inclusions in the sample interior assuming a non-linear magnetization behavior. The initial spatial distribution of particles and its change in an external magnetic field are considered. This is achieved by the introduction of an effective demagnetizing factor where both the sample shape and the material microstructure are taken into account. Theoretical predictions are fitted to the stress data measured using a specifically designed experimental setup. It is shown that the theory enables the quantification of the effect of material microstructure upon introducing a specific microstructural factor and its derivative with respect to the extensional strain in the undeformed state. The experimentally observed differences between isotropic and anisotropic samples, compliant and stiff elastomer matrices are explained. Y1 - 2020 U6 - https://doi.org/10.1039/D0SM01337D VL - 16 IS - 39 SP - 9047 EP - 9058 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Snarskii, Andrei A. A1 - Shamonin (Chamonine), Mikhail A1 - Yuskevich, Pavel A1 - Savelev, Dmitrii V. A1 - Belyaeva, Inna A. T1 - Induced anisotropy in composite materials with reconfigurable microstructure: Effective medium model with movable percolation threshold JF - Physica A: Statistical Mechanics and its Applications N2 - In composite materials, with field-dependent restructuring of the filler material (changes in the mutual arrangement of inclusions), the presence of an external magnetic field induces anisotropy of the dielectric properties, even if the composite is isotropic in the absence of an external field. A modified effective medium approximation is proposed for the calculation of the components of effective permittivity within a class of composites with reconfigurable microstructure, where both phases (the filler and the matrix) are isotropic and the inclusions have spherical shape. The effective physical properties are calculated in the parallel and perpendicular directions to an applied field. The appearance of the anisotropy of the permittivity is simulated by the introduction of two not-equal, possibly variable (field-dependent) percolation thresholds. The implications, of the proposed theoretical approach, are demonstrated for the case of the dielectric properties of magnetoactive elastomers (MAEs). In MAEs with soft polymer matrices, the mutual arrangement of micrometer-sized magnetic inclusions can significantly change in an applied magnetic field. A reasonable agreement between theory and experiment at a measurement frequency of 1 kHz is found, and is improved in comparison to the previous models. The components of the effective permittivity tensor, characterizing the dielectric properties along the direction of the applied magnetic field and in the orthogonal direction, grow with an increasing field. This growth is more pronounced for the permittivity component in the field direction. The possible extensions of the theoretical model and future directions of research are discussed. The presented theoretical approach can be useful for the application-driven development of a number of smart materials, in particular electro- and magnetorheological gels, elastomers and fluids. KW - Effective medium theory KW - Magnetoactive elastomer KW - Percolation threshold KW - Anisotropy KW - Effective permittivity KW - Random heterogeneous medium Y1 - 2020 U6 - https://doi.org/10.1016/j.physa.2020.125170 VL - 560 IS - December PB - Elsevier ER - TY - JOUR A1 - Savelev, Dmitrii V. A1 - Belyaeva, Inna A. A1 - Chashin, Dmitri V. A1 - Fetisov, Leonid Y. A1 - Romeis, Dirk A1 - Kettl, Wolfgang A1 - Kramarenko, Elena Yu A1 - Saphiannikova, Marina A1 - Stepanov, Gennady V. A1 - Shamonin (Chamonine), Mikhail T1 - Giant extensional strain of magnetoactive elastomeric cylinders in uniform magnetic fields JF - Materials N2 - Elongations of magnetoactive elastomers (MAEs) under ascending–descending uniform magnetic fields were studied experimentally using a laboratory apparatus specifically designed to measure large extensional strains (up to 20%) in compliant MAEs. In the literature, such a phenomenon is usually denoted as giant magnetostriction. The synthesized cylindrical MAE samples were based on polydimethylsiloxane matrices filled with micrometer-sized particles of carbonyl iron. The impact of both the macroscopic shape factor of the samples and their magneto-mechanical characteristics were evaluated. For this purpose, the aspect ratio of the MAE cylindrical samples, the concentration of magnetic particles in MAEs and the effective shear modulus were systematically varied. It was shown that the magnetically induced elongation of MAE cylinders in the maximum magnetic field of about 400 kA/m, applied along the cylinder axis, grew with the increasing aspect ratio. The effect of the sample composition is discussed in terms of magnetic filler rearrangements in magnetic fields and the observed experimental tendencies are rationalized by simple theoretical estimates. The obtained results can be used for the design of new smart materials with magnetic-field-controlled deformation properties, e.g., for soft robotics. KW - magnetostriction KW - magnetoactive elastomer KW - extensional strain KW - hysteresis KW - magnetomechanical effect KW - magnetodeformation Y1 - 2020 U6 - https://doi.org/10.3390/ma13153297 SN - 1996-1944 N1 - Corresponding author: Mikhail Shamonin VL - 13 IS - 15 SP - 1 EP - 17 PB - MDPI CY - Basel ER - TY - JOUR A1 - Savelev, Dmitrii V. A1 - Fetisov, Leonid Y. A1 - Chashin, Dmitri V. A1 - Fetisov, Yuri K. A1 - Khon, Anastasia A1 - Shamonin (Chamonine), Mikhail T1 - Effects of ferromagnetic-material thickness on magnetoelectric voltage transformation in a multiferroic heterostructure JF - Smart Materials and Structures N2 - A magnetoelectric (ME) voltage transformer is fabricated on the basis of a ferromagnetic (FM)-piezoelectric (PE) heterostructure comprising two equally thick laminated layers of an amorphous FM alloy and a piezoceramic lead zirconate-titanate layer sandwiched between them. The structure, placed inside an excitation coil, is electrically poled and magnetized in the direction of the long axis. The primary voltage is applied to the coil and the secondary voltage is measured between the electrodes of the PE material. It is shown for the first time that the change in the total thickness of magnetic layers significantly influences the transformer ' s characteristics. At the largest total thickness of FM layers of 138 mu m, the open-circuit voltage transformation ratio K has a maximum value of about 20, and the power transfer efficiency eta at a matched resistive load of about 20 k omega reaches 45%. The variation of the control magnetic field in the range of 0-21.6 kA m(-1) makes it possible to change the voltage transformation ratio K from zero to the maximum value. A simple model allows one to calculate the dependence of the characteristics of the ME transformer on the frequency of the primary voltage, thickness of the FM layers, control magnetic field, and the load. KW - magnetoelectric effect KW - magnetostriction KW - multiferroic heterostructure KW - piezoelectric effect KW - voltage transformer Y1 - 2021 U6 - https://doi.org/10.1088/1361-665X/abf6c0 VL - 30 IS - 6 PB - IOP PUBLISHING ER - TY - JOUR A1 - Savelev, Dmitrii V. A1 - Belyaeva, Inna A. A1 - Chashin, Dmitri V. A1 - Fetisov, Leonid Y. A1 - Shamonin (Chamonine), Mikhail T1 - Large Wiedemann effect in a magnetoactive elastomer JF - Journal of Magnetism and Magnetic Materials N2 - Large twists of a soft tube (hollow cylinder) in helical magnetic fields are presented for the first time. Such a phenomenon is usually denoted as the Wiedemann effect. The tube is fabricated from a soft magnetoactive elastomer material with the shear modulus of about 56 kPa. The composite material comprises 80 mass% of micrometer-sized iron particles embedded into a polydimethylsiloxane matrix. The circular magnetic field is generated by an electric current in a straight wire passing through the inner hole of the tube. The maximum value of approximately 350″/cm is observed in a longitudinal magnetic field of a few kA/m overlapped with a circumferential magnetic field of about 1.4 kA/m on the surface of the inner hole. A pronounced hysteresis in the dependence of the Wiedemann effect on the circular magnetic field is found. The ways to enhance the Wiedemann twist in magnetoactive elastomers are discussed. The observed large effect is promising for application in magnetic-field controlled torsional actuators, in particular for soft robotics. Y1 - 2020 U6 - https://doi.org/10.1016/j.jmmm.2020.166969 VL - 511 IS - October PB - Elsevier ER - TY - JOUR A1 - Savelev, Dmitrii V. A1 - Fetisov, Leonid Y. A1 - Chashin, Dmitri V. A1 - Shabin, P. A. A1 - Vyunik, D. A. A1 - Fedulov, Feodor A1 - Kettl, Wolfgang A1 - Shamonin (Chamonine), Mikhail T1 - Method of Measuring Deformations of Magnetoactive Elastomers under the Action of Magnetic Fields JF - Russian Technological Journal Y1 - 2019 U6 - https://doi.org/10.32362/2500-316x-2019-7-4-81-91 VL - 7 IS - 4 SP - 81 EP - 91 ER - TY - CHAP A1 - Mühlbauer, Christian A1 - Rabl, Hans-Peter A1 - Rottengruber, Hermann ED - Siebenpfeiffer, Wolfgang T1 - Development of a Methodology for Acoustic Analysis and Optimization of Mechatronic Fuel Injection Systems T2 - Automotive Acoustics Conference 2019: Proceedings, 5. Internationale ATZ-Fachtagung Fahrzeugakustik N2 - To identify the sound quality of fuel injection systems as a frontloading measure, a system test bench has been developed that simulates the structure and airborne noise emission. The setup of the system test bench includes an assembly of the acoustical relevant engine parts and an encapsulated drive for the high-pressure pump. A specific control unit enables a high variability for the operation strategy of the injection system. The focus of this study is on the development of a methodology to analyze and optimize the sound quality of gasoline direct injectors in critical operation points by suitable active means. For this, the injection parameters in engine idle have been identified and subsequently transferred to the system test bench. Additionally, the injection parameters have been optimized acoustically and the impacts on the key functions regarding injection rating and shot-to-shot scattering of the injected fuel mass are discussed. Y1 - 2020 SN - 978-3-658-27668-3 U6 - https://doi.org/10.1007/978-3-658-27669-0_15 SP - 211 EP - 225 PB - Springer Vieweg CY - Wiesbaden ER - TY - GEN A1 - Pershina, K. V. A1 - Savelev, Dmitrii V. A1 - Glavan, Gašper A1 - Chashin, Dmitri V. A1 - Belyaeva, Inna A. A1 - Fetisov, Leonid Y. A1 - Shamonin (Chamonine), Mikhail T1 - The voltage response of a structure comprising a magnetoactive-elastomer cylinder and a piezoelectric material to magnetic field step excitations T2 - The 4th International Baltic Conference on Magnetism (IBCM 2021) : Svetlogorsk, Russia August 29 - September 2, 2021 : Book of Abstracts Y1 - 2021 UR - http://smba.science/wp-content/uploads/2021/10/IBCM-2021-Book-of-Abstracts-5.pdf SP - 182 PB - Immanuel Kant Baltic Federal University, Kaliningrad, Russia ER - TY - BOOK A1 - Rill, Georg A1 - Schaeffer, Thomas T1 - Grundlagen und Methodik der Mehrkörpersimulation N2 - Dieses Lehrbuch stellt die Methoden der Mehrkörpersimulation anschaulich dar und erläutert an einfachen Beispielen die Vor- und Nachteile bei der praktischen Anwendung. In den Text integrierte Matlab-Skripte und -Funktionen verdeutlichen die einzelnen Methoden. Die Modellbildung, die mathematische Beschreibung und die numerische Simulation von Systemen starrer Körper bilden dabei die Schwerpunkte. Konkrete Beispiele beinhalten die Eigendynamik eines Traktors mit Vorderachsfederung, das Hubschrauberrotorblatt sowie eine Pkw- Vorderachse. Die entsprechenden Matlab-Skripte und Lösungen zu den Übungsaufgaben können auf der Springer-Homepage beim Buch heruntergeladen werden. Neu aufgenommen wurden SparseMatrix Operationen sowie ein Beispiel zu einfach geschlossenen kinematischen Schleifen. Y1 - 2017 SN - 978-3-658-16008-1 U6 - https://doi.org/10.1007/978-3-658-16009-8 PB - Springer CY - Wiesbaden ET - 3. Aufl. ER - TY - BOOK A1 - Rill, Georg A1 - Schaeffer, Thomas T1 - Grundlagen und Methodik der Mehrkörpersimulation : Vertieft in Matlab-Beispielen, Übungen und Anwendungen N2 - Dieses Lehrbuch vermittelt nicht nur Grundlagen, sondern stellt auch die Methoden der Mehrkörpersimulation anschaulich dar und erläutert an einfachen Beispielen die Vor- und Nachteile bei der praktischen Anwendung. In den Text integrierte Matlab-Skripte und -Funktionen verdeutlichen die einzelnen Methoden und ermöglichen es, Aufwand und Problematik bei der Umsetzung der Theorie innerhalb von Simulationsprogrammen einzuschätzen. Die Modellbildung, die mathematische Beschreibung und die numerische Simulation von Systemen starrer Körper bilden dabei die Schwerpunkte. Konkret behandelte Beispiele sind die Eigendynamik eines Traktors mit gefederter Vorderachse, das Rotorblatt eines Hubschraubers sowie die Vorderachse eines Pkws. Die entsprechenden Matlab-Skripte und Lösungen zu den Übungsaufgaben können auf der Springer-Homepage beim Buch heruntergeladen werden. Der Inhalt Dynamik des starren Körpers - Bewegungsgleichungen - Starre Körper mit elastischen und kinematischen Verbindungselementen - Integrationsverfahren - Rekursiver Algorithmus - Differential-Algebraische Gleichungen - Analyse von Mehrkörpersystemen - Anwendungs- und Übungsbeispiele aus der Technik Die Zielgruppen Studenten des Maschinenbaus, der Elektrotechnik und Mechatronik sowie der Biomechanik an Hochschulen und Universitäten Ingenieure in der Praxis, die sich mit Fragestellungen der Mehrkörpersimulation (MKS) befassen Entwickler aus der Kfz-Technik sowie Fachleute aus F+E Die Autoren Dr.-Ing. Georg Rill ist Professor mit den Lehrgebieten Technische Mechanik, Ingenieurinformatik, Fahrdynamik, Mehrkörperdynamik sowie Laborleiter Fahrdynamik. Dr.-Ing. Thomas Schaeffer ist Professor mit den Lehrgebieten Konstruktion, CAD, Maschinenelemente und Getriebetechnik, Mehrkörpersysteme und Bewegungstechnik sowie Laborleiter Mehrkörpersimulation, beide an der Ostbayerischen Technischen Hochschule (OTH) Regensburg. Y1 - 2014 U6 - https://doi.org/10.1007/978-3-658-06084-8 PB - Springer CY - Berlin ER - TY - JOUR A1 - Rill, Georg A1 - Schuderer, Matthias T1 - A Second-Order Dynamic Friction Model Compared to Commercial Stick–Slip Models JF - Modelling N2 - Friction has long been an important issue in multibody dynamics. Static friction models apply appropriate regularization techniques to convert the stick inequality and the non-smooth stick–slip transition of Coulomb’s approach into a continuous and smooth function of the sliding velocity. However, a regularized friction force is not able to maintain long-term stick. That is why dynamic friction models were developed in recent decades. The friction force depends herein not only on the sliding velocity but also on internal states. The probably best-known representative, the LuGre friction model, is based on a fictitious bristle but realizes a too-simple approximation. The recently published second-order dynamic friction model describes the dynamics of a fictitious bristle more accurately. It is based on a regularized friction force characteristic, which is continuous and smooth but can maintain long-term stick due to an appropriate shift in the regularization. Its performance is compared here to stick–slip friction models, developed and launched not long ago by commercial multibody software packages. The results obtained by a virtual friction test-bench and by a more practical festoon cable system are very promising. Thus, the second-order dynamic friction model may serve not only as an alternative to the LuGre model but also to commercial stick–slip models. KW - commercial stick–slip friction models KW - dynamic friction model KW - long-term stick KW - multibody dynamics Y1 - 2023 U6 - https://doi.org/10.3390/modelling4030021 SN - 2673-3951 N1 - Corresponding author: Georg Rill VL - 4 IS - 3 SP - 366 EP - 381 PB - MDPI ER - TY - GEN A1 - Sterner, Michael A1 - Schumm, Leon T1 - Netzpuffer – Speicher & Kraftwerke als virtuelle Leitungen für mehr Versorgungssicherheit und EE-Integration in Nord und Süd T2 - 7. Smart-Grid-Fachtagung WAGO, Hannover, 29. Sept. 2021 KW - Stromspeicher KW - Batterien KW - Netzpuffer KW - Stromnetz Y1 - 2021 ER - TY - RPRT A1 - Sterner, Michael A1 - Schumm, Leon A1 - Rank, Daniel A1 - Hofrichter, Andreas T1 - Intelligente Netzpuffer : Abschlussbericht (24.01.2021) KW - Stromspeicher KW - Batterien KW - Netzpuffer KW - Stromnetz Y1 - 2021 N1 - unveröffentlichter Abschlussbericht ER - TY - JOUR A1 - Walter, Stefanie A1 - Schwanzer, Peter A1 - Hagen, Gunter A1 - Rabl, Hans-Peter A1 - Dietrich, Markus A1 - Moos, Ralf T1 - Combined Ash and Soot Monitoring for Gasoline Particulate Filters Using a Radio-Frequency-Based Sensor JF - Emission Control Science and Technology N2 - Increasingly stringent emission limits have made particulate filters necessary for gasoline engines. Similar to diesel applications, gasoline particulate filters (GPFs) can be monitored by differential pressure measurement or by the radio-frequency-based filter diagnosis (RF sensor). In addition to measuring the soot loading, ash detection is critical for monitoring the GPF over the entire vehicle lifetime. Because the RF sensor detects the filter loading through a change in the dielectric properties of the GPF, it can detect not only soot but also ash. In diesel applications, the RF sensor has already demonstrated its potential for ash detection. To verify the feasibility of simultaneous ash and soot monitoring for GPFs, filters were loaded with ash on an engine test bench and measured on a lab test bench under defined synthetic exhaust gas conditions. By evaluating resonant modes, soot and ash could be clearly distinguished, as ash mainly affects the resonant frequency, while soot also changes the quality factor due to its high dielectric losses. However, higher soot loadings could not be detected by the resonant parameters, but instead by a frequency-averaged transmission signal. While the presence of ash caused an offset in this signal, its sensitivity to soot was not affected. Thus, the influence of ash can be corrected if the signal in the soot-free filter state is known, e.g., from the behavior of the resonant parameters. Therefore, even with a continuously increasing ash loading over the lifetime of a vehicle, an accurate soot detection is possible with the RF sensor. KW - Gasoline particulate flter KW - Radio-frequency KW - Soot mass determination KW - Ash detection Y1 - 2023 U6 - https://doi.org/10.1007/s40825-023-00235-y PB - Springer ER - TY - GEN A1 - Walter, Stefanie A1 - Schwanzer, Peter A1 - Hagen, Gunter A1 - Rabl, Hans-Peter A1 - Dietrich, Markus A1 - Moos, Ralf T1 - Combined Ash and Soot Monitoring in Gasoline Particulate Filters with a Radio-Frequency-Based Sensor T2 - SAE World Congress Experience, April 5-7, 2022, Detroit, Michigan, USA N2 - In recent years, it turned out that primarily the number of ultrafine particles and not their mass is relevant in terms of harmful health effects. Therefore, exhaust emission standards are constantly being tightened with regard to the particulate number. To meet the emission limits, particulate filters have become necessary for gasoline engines. Similar to diesel applications, gasoline particulate filters (GPFs) can be monitored via differential pressure measurement or via a radio-frequency approach (RF-sensor). The latter is based on the influence of the soot conductivity on the electromagnetic field. To control the GPF, ash detection is of crucial importance besides the soot load monitoring. With the differential pressure system, this is only possible with high uncertainties due to the low pressure increase caused by ash. The RF-sensor, however, has already demonstrated its potential for ash detection in diesel applications. In order to verify the applicability of the system for GPFs, filters were loaded via a method for fast ash loading. Thereby, it was shown that by evaluating resonant modes – especially the resonant frequency – the ash loading can easily be measured as long as the filter is soot-unloaded. In contrast, soot loading can be determined independently from this by considering a frequency-averaged transmission signal between the antennas of the RF-sensor. Using a setup for radio-frequency material characterization, the dielectric parameters of the generated ash were also measured. In comparison with the properties of the synthetic soot PrintexU, ash showed significantly lower dielectric losses. Thus, the evaluation of the loss-dependent quality factor, which is only possible at low soot loadings, allows a precise conclusion whether the filter is completely soot-free. Furthermore, using synthetic soot loading, it could be shown that soot detection via the averaged transmission signal is not affected by ash. In summary, it could be shown that with the RF-sensor, ash and soot can be simultaneously detected. Y1 - 2022 UR - https://eref.uni-bayreuth.de/id/eprint/69506 ER - TY - INPR A1 - Schumm, Leon A1 - Abdel-Khalek, Hazem A1 - Brown, Tom A1 - Ueckerdt, Falko A1 - Sterner, Michael A1 - Fioriti, Davide A1 - Parzen, Max T1 - The impact of temporal hydrogen regulation on hydrogen exporters and their domestic energy transition N2 - As global demand for green hydrogen rises, potential hydrogen exporters move into the spotlight. However, the large-scale installation of on-grid hydrogen electrolysis for export can have profound impacts on domestic energy prices and energy-related emissions. Our investigation explores the interplay of hydrogen exports, domestic energy transition and temporal hydrogen regulation, employing a sector-coupled energy model in Morocco. We find substantial co-benets of domestic climate change mitigation and hydrogen exports, whereby exports can reduce domestic electricity prices while mitigation reduces hydrogen export prices. However, increasing hydrogen exports quickly in a system that is still dominated by fossil fuels can substantially raise domestic electricity prices, if green hydrogen production is not regulated. Surprisingly, temporal matching of hydrogen production lowers domestic electricity cost by up to 31% while the effect on exporters is minimal. This policy instrument can steer the welfare (re-)distribution between hydrogen exporting firms, hydrogen importers, and domestic electricity consumers and hereby increases acceptance among actors. KW - Energy Transition KW - Hydrogen regulation KW - Hydrogen export KW - Climate-neutral KW - Domestic prices KW - Hydrogen prices KW - Power-to-X Y1 - 2024 U6 - https://doi.org/10.21203/rs.3.rs-4285425/v1 N1 - Der Aufsatz wurde peer-reviewed veröffentlicht und ist ebenfalls in diesem Repositorium verzeichnet unter: https://opus4.kobv.de/opus4-oth-regensburg/8485 PB - Research Square Platform LLC ER - TY - JOUR A1 - Tremmel, Florian A1 - Nagler, Oliver A1 - Kutter, Christoph A1 - Holmer, Rainer T1 - Mechanical robustness analysis of semiconductors with a single needle probe card using acoustic emissions JF - e-Journal of Nondestructive Testing N2 - The combination of indentation testing and acoustic emission (AE) is widely used to analyze the fracture toughness of test substrates. In the manufacturing of semiconductor devices this material parameter also plays an important role. During the so-called wafer testing inside a wafer prober small probe tips are pressed onto the chip surface to check its performance. To prevent damaging the chip by that, the fracture toughness and load limit of it has to be defined in a prequalification step. This paper presents a test system that imitates the wafer testing process as close as possible and uses acoustic emission to detect appearing cracks and thereby also the load limit. The frontend of the test setup consists of a modular single needle probe card which can be placed in a wafer prober. Also, the indenter properties (tip diameter, stiffness, etc.) can be adjusted to the probe used later on during productive wafer testing to ensure realistic probing conditions. A piezoelectric sensor and a full strain gauge Wheatstone bridge are implemented close to the single indenter to measure the AEs and the applied contact force respectively. The signal-to-noise-ratios (SNRs) of both sensors are improved with an own analog amplifier module before recording them with an USB oscilloscope. A developed measurement software (LabVIEW) is used to adjust measurement parameters (trigger limit, record length, conversion factors, etc.) and automatically store and separate measurement data from different acoustic events and imprints. To evaluate the result files a second software tool (MATLAB) reads the files out and clusters the recorded events to separate crack signals from electrical and mechanical disturbances. With a prototype first test results are generated and the functionality and accuracy of the measurement concept is proven. KW - Acoustic Emission KW - Crack probability distribution KW - Fracture load limit KW - Wafer testing Y1 - 2024 U6 - https://doi.org/10.58286/30254 SN - 1435-4934 VL - 29 IS - 10 PB - NDT.net ER - TY - RPRT A1 - Volkenhoff, Tobias A1 - Gerstenberger, Marcus A1 - Breitbarth, Lutz A1 - Carstensen, Christian A1 - Dölger, Reiner A1 - Feldges, Michael A1 - Hegewald, Jessica A1 - Mutzbauer, Johannes A1 - Rose, Martin A1 - Schopf, Hans Jürgen A1 - Schroth, Max A1 - Schwietering, Christoph A1 - Seidel, Christian A1 - Sievers, Ariane A1 - Spangler, Matthias A1 - Trupat, Stefan A1 - Üstün, Ellen T1 - H NBA - Hinweise zum Einsatz von Netzbeeinflussungsanlagen KW - Verkehrstechnik KW - Netzbeeinflussungsanlagen KW - Verkehrsmanagement Y1 - 2025 SN - 978-3-86646-434-8 IS - 310/1 PB - FGSV CY - Köln ET - Ausgabe 2025 ER - TY - JOUR A1 - Schumm, Leon A1 - Brown, Tom A1 - Abdel-Khalek, Hazem A1 - Ueckerdt, Falko A1 - Sterner, Michael A1 - Fioriti, David A1 - Parzen, Max T1 - The impact of temporal hydrogen regulation on hydrogen exporters and their domestic energy transition JF - Nature Communications N2 - As global demand for green hydrogen rises, potential hydrogen exporters move into the spotlight. While exports can bring countries revenue, large-scale on-grid hydrogen electrolysis for export can profoundly impact domestic energy prices and energy-related emissions. Our investigation explores the interplay of hydrogen exports, domestic energy transition and temporal hydrogen regulation, employing a sector-coupled energy model in Morocco. We find substantial co-benefits of domestic carbon dioxide mitigation and hydrogen exports, whereby exports can reduce market-based costs for domestic electricity consumers while mitigation reduces costs for hydrogen exporters. However, increasing hydrogen exports in a fossil-dominated system can substantially raise market-based costs for domestic electricity consumers, but surprisingly, temporal matching of hydrogen production can lower these costs by up to 31% with minimal impact on exporters. Here, we show that this policy instrument can steer the welfare (re-)distribution between hydrogen exporting firms, hydrogen importers, and domestic electricity consumers and hereby increases acceptance among actors. KW - Energy Transition KW - Hydrogen regulation Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-84857 N1 - Die Preprint-Version ist ebenfalls in diesem Repositorium verzeichnet unter: https://opus4.kobv.de/opus4-oth-regensburg/7272 VL - 16 PB - Nature CY - London ER - TY - RPRT A1 - Bhardwaj, Prakhar A1 - Hauer, Franziska A1 - Mücke, Vanessa A1 - Dotter, Caroline A1 - Haug, Sonja A1 - Weikl, Simone A1 - Weber, Karsten T1 - Recording and understanding multi- and intermodal mobility - a review N2 - The transition to sustainable mobility requires detailed knowledge of actual mobility behavior. Recording mobility behavior through conventional, aggregated, or retrospective survey methods (e.g., counting stations, travel diaries) may yield incomplete insights. In addition, these methods are often expensive, prone to error, or not scalable. The aim of this literature review is to provide a systematic overview of the current state of the literature on recording and analysis of individual mobility data and, based on this, to identify possible research gaps and potential. The exploratory literature review includes social science surveys on multi- and intermodal mobility behavior, as well as an overview of possible ways to analyze travel data. The focus of the latter is on identifying relevant data sources and methodological approaches for segmentation, identification of transport mode, and trip purpose determination. Results from recent studies show that sensor-based data collection alone is not sufficient to fully and accurately map mobility behavior. One possible solution is a “best-of-both-worlds” approach that combines passive, automatic mobility data collection via smartphone sensors with targeted user corrections and additions (“human-in-the-loop”) within an app. The literature review shows that this approach yields the best data quality. Combining mobility surveys with passive collection of mobility data provides a comprehensive, accurate, and complete overview of mobility behavior. KW - multimodal mobility KW - mobility Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-87427 CY - Regensburg ER - TY - GEN A1 - Rahim, Stefan A1 - Schumm, Leon T1 - Weather Data Cutouts for the Wasserstoffatlas (Hydrogen Map) [Data set] N2 - The cutouts are required to calculate the solar PV and wind onshore feed-in profiles of the Wasserstoffatlas. The provided cutouts are spatiotemporal subsets of the European weather data from the ECMWF ERA5 reanalysis dataset and the CMSAF SARAH-2 solar surface radiation dataset for the year 2013. They have been prepared by and are for use with the atlite tool (https://atlite.readthedocs.io/). ECMWF ERA5 Source: https://cds.climate.copernicus.eu/cdsapp#!/dataset/reanalysis-era5-single-levels?tab=overview Terms of Use: https://cds.climate.copernicus.eu/api/v2/terms/static/20180314_Copernicus_License_V1.1.pdf CMSAF SARAH-2 Pfeifroth, Uwe; Kothe, Steffen; Müller, Richard; Trentmann, Jörg; Hollmann, Rainer; Fuchs, Petra; Werscheck, Martin (2017): Surface Radiation Data Set - Heliosat (SARAH) - Edition 2, Satellite Application Facility on Climate Monitoring, DOI:10.5676/EUM_SAF_CM/SARAH/V002, https://doi.org/10.5676/EUM_SAF_CM/SARAH/V002 Terms of Use: https://www.eumetsat.int/cs/idcplg?IdcService=GET_FILE&dDocName=pdf_leg_data_policy&allowInterrupt=1&noSaveAs=1&RevisionSelectionMethod=LatestReleased Y1 - 2023 U6 - https://doi.org/10.5281/zenodo.8135586 ER - TY - GEN A1 - Birett, Falk A1 - Schumm, Leon A1 - Hofrichter, Andreas A1 - Heusgen, Valentin A1 - Rahim, Stefan T1 - Wasserstoffatlas Deutschland (Hydrogen Map) [Data set] N2 - Input files required for Hydrogen Map workflow in the project "Wasserstoffatlas Deutschland", funded by the BMBF. Y1 - 2025 U6 - https://doi.org/10.5281/zenodo.13960465 N1 - Further versions linked on Zenodo. ER -