TY - RPRT A1 - Thema, Martin A1 - Kaul, Anja A1 - Sterner, Michael A1 - Heberl, Michael T1 - Optimierung eines Rieselbett-Bioreaktors für die dynamische mikrobielle Biosynthese von Methan mit Archaeen-Mikroorganismen in Power-to-Gas-Anlagen N2 - Das übergeordnete Ziel des Vorhabens war die Entwicklung neuer technologischer Möglichkeiten für den biologischen Methanisierungsprozess mit Archaeen1 in Power-to-Gas-Anwendungen. Im Gegensatz zur technisch ausgereiften chemisch-katalytischen Methanisierung sind hier noch Potenziale zur Optimierung verfahrenstechnischer und biologischer Prozesse für das Speicherkonzept Power-to-Gas [7] vorhanden. Dabei sollte zum einen ein Rieselbett-Bioreaktor optimiert, simuliert und für die Hochskalierung vorbereitet werden. Zum anderen sollte eine Kombination optimal geeigneter Mikroorganismen und Packungsmaterialien selektiert und deren Verhalten und Eignung im Reaktor analysiert werden. Das Verhalten des entwickelten Systems sollte zunächst im Labor- und Technikumsmaßstab und anschließend im Feldtest an einer bestehenden Power-to-Gas-Anlage untersucht werden. Hauptziel während des Feldtests war die Produktion von einspeisefähigem Methan sowie dessen Einspeisung ins Gasnetz. Ein Hauptziel des Projektes war es, die Normung und Standardisierung notwendiger Systemparameter und Semantik zur Beschreibung und Einbindung biologischer Methanisierungseinheiten in Power-to-Gas-Anlagen voranzutreiben. Dies sollte zum einen die Vergleichbarkeit der wissenschaftlichen Erkenntnisse verbessern und zum anderen unterstützend bei der Kommerzialisierung der Technologie wirken. Aus dem Projekt heraus wurde so die neue Normungsreihe VDI 4635 Power-to-X beim Verein Deutscher Ingenieure angestoßen. KW - Biologische Methanisierung KW - Power-to-Gas KW - Erneuerbare Energien KW - Rieselbett-Bioreaktor KW - Archaeen Y1 - 2021 U6 - https://doi.org/10.2314/KXP:1815321555 ER - TY - CHAP A1 - Klitsman, Maksym A1 - Brückl, Oliver A1 - Eller, Johannes ED - Schulz, Detlef T1 - Analysis and simulation of the population driving behaviour and charging processes at different charging station types with electric vehicles T2 - NEIS 2021, Conference on Sustainable Energy Supply and Energy Storage Systems: 13-14. September 2021, Hamburg N2 - Electric vehicles are one of the important components of the energy transition, which is necessary for the CO2 emission reduction. In order to estimate the influence of electromobility on electric grids at present day and in the future, the generation of realistic charge profiles is necessary. The main objective of this study is the development of an algorithm, which generates realistic charge time series of electric vehicles. The very huge and detailed input surveys enable to define different population groups, representing specific driving behaviour. These groups are then composed and scaled up, according to the statistical population structure of a chosen town or city in Germany, and show typical driving behaviour of all inhabitants. The charge profiles are calculated for several charge station types, based on daily electric vehicle user mobility, day type and household type. In addition, charge process occurrence is evaluated through a model, involving charge infrastructure presence, attractiveness of corresponding charge station type and charge process necessity. Y1 - 2021 SN - 978-3-8007-5651-3 SP - 254 EP - 260 PB - VDE-Verlag ER - TY - GEN A1 - Pershina, K. V. A1 - Saveliev, Dmitry V. A1 - Glavan, Gašper A1 - Chashin, Dmitri V. A1 - Belyaeva, Inna A. A1 - Fetisov, Leonid Y. A1 - Shamonin (Chamonine), Mikhail T1 - The voltage response of a structure comprising a magnetoactive-elastomer cylinder and a piezoelectric material to magnetic field step excitations T2 - The 4th International Baltic Conference on Magnetism (IBCM 2021) : Svetlogorsk, Russia August 29 - September 2, 2021 : Book of Abstracts Y1 - 2021 UR - http://smba.science/wp-content/uploads/2021/10/IBCM-2021-Book-of-Abstracts-5.pdf SP - 182 PB - Immanuel Kant Baltic Federal University, Kaliningrad, Russia ER - TY - GEN A1 - Sterner, Michael A1 - Heberl, Michael T1 - The ORBIT-Project: Biological methanation in a trickle-bed reactor - key results and next steps T2 - 5th Nuremberg Workshop on Methanation and 2nd Generation, Nürnberg Friedrich-Alexander-Universität, 28.05.2021 KW - biologische Methanisierung KW - Archaeen KW - Power-to-Gas KW - Erneuerbare Energien KW - Rieselbett Bioreaktor Y1 - 2021 ER - TY - JOUR A1 - Rill, Georg A1 - Bauer, Florian A1 - Kirchbeck, Mathias T1 - VTT - a virtual test truck for modern simulation tasks JF - Vehicle system dynamics N2 - The development of new technologies like advanced driver assistance systems or automated driving requires a flexible simulation environment of sufficient complexity. In general this flexibility is not provided by commercial software packages. This paper presents a three-dimensional and nonlinear hand-made model for heavy commercial vehicles including tractor and trailer as well as tractor and semitrailer combinations that can be used in different simulation environments, as well as in real-time applications. As typical for trucks, the torsional flexibility of the frame and a suspended driver's cabin are taken into account. The design kinematics makes it possible to handle different and quite complex axle suspensions very efficiently. Appropriate force elements are used to model various couplings between tractor and trailer or tractor and semitrailer, respectively. The virtual test truck environment (VTT) coded in ANSI C is extremely portable and can easily be embedded in commercial simulation packages like MATLAB/Simulink. It includes the TMeasy tyre model and offers flexible interfaces to third-party software tools. KW - coupled air springs KW - design Kinematics KW - heavy commercial vehicles KW - MATLAB KW - Simulink KW - TMeasy tyre model KW - vehicle coupling KW - Vehicle modelling Y1 - 2021 U6 - https://doi.org/10.1080/00423114.2019.1705356 VL - 59 IS - 4 SP - 635 EP - 656 PB - Taylor&Francis ER - TY - JOUR A1 - Rill, Georg A1 - Bauer, Florian A1 - Topcagic, Edin T1 - Performance of leaf spring suspended axles in model approaches of different complexities JF - Vehicle System Dynamics N2 - Axles with leaf spring suspension systems are still a popular choice in many commercial vehicles. However, leaf springs are not in perfect conformity to standard multibody vehicle models because they combine guidance and suspension in one single element. Combining standard multibody vehicle models with sophisticated finite element leaf spring models results in rather complex and computing time-consuming solutions. Purely kinematic models, defined by lookup tables or the design kinematics approach, cover only some but not all features of the leaf spring suspension. As shown here, the five-link model, which incorporates a quasi-static solution of the leaf spring compliance, provides a very practical model. It is comparatively lean and provides results of sufficient accuracy in the whole application range. KW - beam-model KW - commercial vehicles KW - design kinematics KW - five-Link model KW - Leaf spring suspension KW - vehicle dynamics Y1 - 2021 U6 - https://doi.org/10.1080/00423114.2021.1928249 VL - 60 IS - 8 SP - 2871 EP - 2889 PB - Taylor&Francis ER - TY - GEN A1 - Sterner, Michael T1 - Strom - Wärme - Verkehr - Industrie: das Zusammenspiel der Sektoren über Power-to-X T2 - Deutscher Ingenieurtag 2021, Düsseldorf 20. Mai 2021 KW - Erneuerbare Energien KW - Klimaneutralität KW - Energiewende KW - Sektorenkopplung Y1 - 2021 PB - VDI-Verlag ER - TY - JOUR A1 - Frazzica, Andrea A1 - Palomba, Valeria A1 - Dawoud, Belal T1 - Thermodynamic Performance of Adsorption Working Pairs for Low-Temperature Waste Heat Upgrading in Industrial Applications JF - Applied Sciences N2 - The present work aims at the thermodynamic analysis of different working pairs in adsorption heat transformers (AdHT) for low-temperature waste heat upgrade in industrial processes. Two different AdHT configurations have been simulated, namely with and without heat recovery between the adsorbent beds. Ten working pairs, employing different adsorbent materials and four different refrigerants, have been compared at varying working boundary conditions. The effects of heat recovery and the presence of a temperature gradient for heat transfer between sinks/sources and the AdHT components have been analyzed. The achieved results demonstrate the possibility of increasing the overall performance when internal heat recovery is implemented. They also highlight the relevant role played by the existing temperature gradient between heat transfer fluids and components, that strongly affect the real operating cycle of the AdHT and thus its expected performance. Both extremely low, i.e., 40-50 degrees C, and low (i.e., 80 degrees C) waste heat source temperatures were investigated at variable ambient temperatures, evaluating the achievable COP and specific energy. The main results demonstrate that optimal performance can be achieved when 40-50 K of temperature difference between waste heat source and ambient temperature are guaranteed. Furthermore, composite sorbents demonstrated to be the most promising adsorbent materials for this application, given their high sorption capacity compared to pure adsorbents, which is reflected in much higher achievable specific energy. KW - adsorption KW - efficiency KW - heat transformer KW - heat upgrading KW - waste heat KW - working pairs Y1 - 2021 U6 - https://doi.org/10.3390/app11083389 VL - 11 IS - 8 PB - MDPI ER - TY - JOUR A1 - Thema, Martin A1 - Weidlich, Tobias A1 - Kaul, Anja A1 - Böllmann, Andrea A1 - Huber, Harald A1 - Bellack, Annett A1 - Karl, Jürgen A1 - Sterner, Michael T1 - Optimized biological CO2-methanation with a pure culture of thermophilic methanogenic archaea in a trickle-bed reactor JF - Bioresource Technology N2 - In this study, a fully automated process converting hydrogen and carbon dioxide to methane in a high temperature trickle-bed reactor was developed from lab scale to field test level. The reactor design and system performance was optimized to yield high methane content in the product gas for direct feed-in to the gas grid. The reaction was catalyzed by a pure culture of Methanothermobacter thermoautotrophicus IM5, which formed a biofilm on ceramic packing elements. During 600 h in continuous and semi-continuous operation in countercurrent flow, the 0.05 m3 reactor produced up to 95.3 % of methane at a methane production rate of 0.35 mCH43mR-3h-1. Adding nitrogen as carrier gas during startup, foam control and dosing of ammonium and sodium sulfide as nitrogen and sulfur source were important factors for process automation. KW - Biological methanation KW - Power-to-Gas KW - Reactor concept KW - Thermophilic archaea KW - Trickle-bed reactor Y1 - 2021 U6 - https://doi.org/10.1016/j.biortech.2021.125135 IS - 333 PB - Elsevier ER - TY - JOUR A1 - Gärtner, Sebastian A1 - Rank, Daniel A1 - Heberl, Michael A1 - Gaderer, Matthias A1 - Dawoud, Belal A1 - Haumer, Anton A1 - Sterner, Michael T1 - Simulation and Techno-Economic Analysis of a Power-to-Hydrogen Process for Oxyfuel Glass Melting JF - Energies N2 - As an energy-intensive industry sector, the glass industry is strongly affected by the increasingly stringent climate protection targets. As established combustion-based production systems ensure high process stability and glass quality, an immediate switch to low greenhouse gas emission processes is difficult. To approach these challenges, this work investigates a step-by-step integration of a Power-to-Hydrogen concept into established oxyfuel glass melting processes using a simulation approach. This is complemented by a case study for economic analysis on a selected German glass industry site by simulating the power production of a nearby renewable energy park and subsequent optimization of the power-to-hydrogen plant performance and capacities. The results of this study indicate, that the proposed system can reduce specific carbon dioxide emissions by up to 60%, while increasing specific energy demand by a maximum of 25%. Investigations of the impact of altered combustion and furnace properties like adiabatic flame temperature (+25 °C), temperature efficiency (∆ξ = −0.003) and heat capacity flow ratio (∆zHL = −0.009) indicate that pure hydrogen-oxygen combustion has less impact on melting properties than assumed so far. Within the case study, high CO2 abatement costs of 295 €/t CO2-eq. were determined. This is mainly due to the insufficient performance of renewable energy sources. The correlations between process scaling and economic parameters presented in this study show promising potential for further economic optimization of the proposed energy system in the future. KW - Power-to-Gas KW - Hydrogen KW - Electrolysis KW - Oxyfuel KW - Glass Industry Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-22713 N1 - Corresponding author: Sebastian Gärtner VL - 14 IS - 24 PB - MDPI ER - TY - JOUR A1 - Schorr, Philipp A1 - Zentner, Lena A1 - Zimmermann, Klaus A1 - Böhm, Valter T1 - Jumping locomotion system based on a multistable tensegrity structure JF - Mechanical systems and signal processing N2 - All known locomotion principles are limited respective to environmental conditions. Often, the occurrence of obstacles or gaps means the break-off for the operating motion systems. For such circumstances, a controllable jumping locomotion is required to cross these barriers. However, this locomotion demands sophisticated requirements to the actuation. The abrupt actuation is commonly realized by high dynamic actuators or complex mechanisms. In this work, a simple solution utilizing the multistability of a compliant tensegrity structure is described. Therefore, a two-dimensional tensegrity structure featuring four stable equilibria is considered. Based on bifurcation analyses a feasible actuation to control the current equilibrium configuration is derived. Changing between selected equilibrium states enables a great difference in potential energy, which yields a jumping motion of the structure. Based on numerical simulations a suitable actuation strategy is chosen to overcome obstacle and steps by jumping forward or backward, respectively. The theoretical approach is examined experimentally with a prototype of the multistable tensegrity structure. (c) 2020 Elsevier Ltd. All rights reserved. All known locomotion principles are limited respective to environmental conditions. Often, the occurrence of obstacles or gaps means the break-off for the operating motion systems. For such circumstances, a controllable jumping locomotion is required to cross these barriers. However, this locomotion demands sophisticated requirements to the actuation. The abrupt actuation is commonly realized by high dynamic actuators or complex mechanisms. In this work, a simple solution utilizing the multistability of a compliant tensegrity structure is described. Therefore, a two-dimensional tensegrity structure featuring four stable equilibria is considered. Based on bifurcation analyses a feasible actuation to control the current equilibrium configuration is derived. Changing between selected equilibrium states enables a great difference in potential energy, which yields a jumping motion of the structure. Based on numerical simulations a suitable actuation strategy is chosen to overcome obstacle and steps by jumping forward or backward, respectively. The theoretical approach is examined experimentally with a prototype of the multistable tensegrity structure. KW - Compliant tensegrity structure KW - Multibody dynamics KW - Multistability KW - Non-classical locomotion Y1 - 2021 U6 - https://doi.org/10.1016/j.ymssp.2020.107384 IS - 152 PB - Elsevier ER - TY - JOUR A1 - Haug, Sonja A1 - Vetter, Miriam T1 - Altersgerechtes Wohnen im Quartier JF - Standort - Zeitschrift für angewandte Geographie N2 - Im Alter nimmt das Quartier aufgrund geringerer Aktionsradien an Bedeutung zu. Der Beitrag befasst sich mit der Frage, welche Besonderheiten sich bei Senioren-Haushalten im Hinblick auf Wohnen und soziale Teilhabe zeigen. Aus dem Projekt MAGGIE werden Ergebnisse einer schriftlichen Haushaltsbefragung (N=195) in der Wohngenossenschaft Margaretenau Regensburg dargestellt. Hierbei wird auf die aktuelle und zukünftige Wohnsituation, den Veränderungsbedarf, den Wunsch nach Gemeinschaftsangeboten und die soziale Einbettung eingegangen. Es zeigt sich eine geringe Veränderungsbereitschaft und ein überdurchschnittlich hohes Maß an lokalem Sozialkapital. Am Ende werden Schlussfolgerungen für das Sanierungs- und Quartiersmanagement gezogen. T2 - Age-appropriate living in the neighborhood KW - Alter KW - Wohnen KW - Stadtviertel KW - Sozialraum KW - Senioren KW - Wohnsituation KW - Sozialraum KW - Lokales Sozialkapital KW - Quartiersgestaltung Y1 - 2021 U6 - https://doi.org/10.1007/s00548-020-00678-3 SN - 1432-220X N1 - Corresponding author: Sonja Haug VL - 45 SP - 11 EP - 17 PB - Springer Nature ER - TY - JOUR A1 - Palomba, Valeria A1 - Nowak, Sebastian A1 - Dawoud, Belal A1 - Frazzica, Andrea T1 - Dynamic modelling of Adsorption systems: a comprehensive calibrated dataset for heat pump and storage applications JF - Journal of energy storage N2 - The growing efforts for the development of clean and efficient energy systems require the use of a multi-disciplinary approach and the integration of multiple generation appliances. Among the fields that can be considered enabling technologies, adsorption systems for air conditioning and thermal energy storages, are constantly increasing their maturity. However, for a proper design and integration of such systems, there is the need for a simulation framework that is reliable and computationally convenient. In the present paper, the implementation of a dynamic model for adsorption systems is presented, which includes different components (adsorber, phase changer, sorption materials) and is structured as a library. Modelica language and the commercial software Dymola (R) are used for the analysis. Data for different heat exchangers and working pairs are calibrated using experimental results and the calibrated model is subsequently used for the design of an adsorber based on a plate heat exchanger for thermal energy storage applications. The results proved that the model is fast and can reproduce experimental results with good accuracy, thus being a useful tool for the design and optimization of the different components of sorption systems. KW - CHILLERS KW - DIFFUSION KW - ETHANOL ADSORPTION KW - Optimization KW - PERFORMANCE KW - SCALE KW - simulation KW - THERMAL-ENERGY STORAGE KW - TRANSFORMATION KW - WATER-ADSORPTION Y1 - 2021 U6 - https://doi.org/10.1016/j.est.2020.102148 VL - 33 PB - Elsevier ER - TY - JOUR A1 - Sovacool, Benjamin K. A1 - Cabeza, Luisa F. A1 - Pisello, Anna Laura A1 - Colladon, Andrea Fronzetti A1 - Larijani, Hatef Madani A1 - Dawoud, Belal A1 - Martiskainen, Mari T1 - Decarbonizing household heating: Reviewing demographics, geography and low-carbon practices and preferences in five European countries JF - Renewable & Sustainable Energy Reviews N2 - What commonalities are there in sustainable or unsustainable heating practices in five high-income, high-emitting western European countries? What preferences do a nationally representative sample of the public in these countries hold towards low-carbon options? It is imperative that climate policy researchers and practitioners grapple with the difficulty of decarbonizing heat, which remains the largest single end-use service worldwide and which accounts about half of total final energy consumption. Based on a comparative assessment of five representative national surveys in Germany (N = 2009), Italy (N = 2039), Spain (N = 2038), Sweden (N = 2023), and the United Kingdom (N = 2000), this study explores the demographics and geography of household heat decarbonisation in Europe. By analyzing our country level data as well as our combined sample of 10,109 respondents, it investigates how people conceive of the purposes of low-carbon heat, their preferences for particular forms of heat supply, and their (at times odd) practices of heat consumption and temperature settings. Grounded in its original data, the study organizes its findings inductively across the five themes of literacy (heating knowledge, awareness and control), sustainability (heating practices, dynamics and conflicts), temperature (heating satisfaction and preferences), desirability of change (low-carbon heating priorities, business models and trust), and culture (country and national variation). The study also explores intersections between these dimensions, using multivariate analysis, as well as how preferences differ according to varying types of actors as well as geography and space. KW - Climate policy KW - Cooling KW - Energy policy KW - Heat decarbonisation KW - Household heat KW - Low-carbon heating KW - Space heating Y1 - 2021 U6 - https://doi.org/10.1016/j.rser.2020.110703 IS - 139 SP - 1 EP - 28 PB - Elsevier ER - TY - JOUR A1 - Monkman, Gareth J. A1 - Sindersberger, Dirk A1 - Prem, Nina A1 - Diermeier, Andreas A1 - Szecsey, Tamara T1 - Dielectric behaviour of magnetic hybrid materials JF - Physical Sciences Reviews N2 - The objectives of this work include the analysis of electrical and magnetic properties of magneto-elastic hybrid materials with the intention of developing new techniques for sensor and actuator applications. This includes the investigation of dielectric properties at both low and high frequencies. The behaviour of capacitors whose dielectrics comprise magnetic hybrid materials is well known. Such interfacial magnetocapacitance can be varied according to magnetic content, magnetic flux density and the relative permittivity of the polymer matrix together with other dielectric content. The basic function of trapping electrical charges in polymers (electrets) is also established technology. However, the combination of magnetoactive polymers and electrets has led to the first electromagnetic device capable of adhering to almost any material, whether magnetically susceptible or not. During the course of this research, in addition to dielectrics, electrically conductive polymers based on (PDMS) matrices were developed in order to vary the electrical properties of the material in a targeted manner. In order to ensure repeatable results, this demanded new fabrication techniques hitherto unavailable. The 3D printing of silicones is far from being a mature technology and much pioneering work was necessary before extending the usual 3 d.o.f. to include orientation about and diffusion of particles in these three axes, thus leading to the concept of 6D printing. In 6D printing, the application of a magnetic field can be used during the curing process to control the particulate distribution and thus the spatial filler particle density as desired. Most of the devices (sensors and actuators) produced by such methods contain levels of carbonyl iron powder (CIP) embedded magnetic filler of up to 70 wt%. Contrary to this, a hitherto neglected research area, namely magnetoactive polymers (MAPs) having significantly lower magnetic particle concentrations (1 to 3 wt% CIP) were also investigated. With filler concentrations lower than 3 wt%, structures are formed which are completely absent at higher filler levels. CIP concentrations in the range of 1wt% demonstrate the formation of toroidal structures. Further development of coherent rings with a compact order results as filler concentrations increase towards 2 wt%. Above 3 wt% the structure eventually disintegrates to the usual random order found in traditional MAP with higher CIP content. Structured samples containing 1%–3 wt% CIP were investigated with the aid of X-ray tomography where solitary ring structures can be observed and eventually the formation of capillary doubles. Over wavelengths ranging from 1 to 25 µm, spectroscopic analysis of thin film MAP samples containing 2 wt% CIP revealed measurable magnetic-field-dependent changes in IR absorption at a wavenumber 2350 (λ = 4.255 µm). This was found to be due to the diamagnetic susceptibility of atmospheric carbon dioxide (CO2). Consequently, the first potential application for sparse matrix MAPs was found. KW - cappillary doublet KW - diamagnetic KW - elastomer dielectric KW - FTIR KW - interfacial magnetocapacitance KW - magnetoactive polymer KW - PDMS KW - toroid Y1 - 2021 U6 - https://doi.org/10.1515/psr-2019-0121 N1 - Corresponding author: Gareth J. Monkman VL - 7 IS - 10 SP - 1169 EP - 1185 PB - de Gruyter ER - TY - JOUR A1 - Schwanzer, Peter A1 - Schillinger, Maximilian A1 - Mieslinger, Johann A1 - Walter, Stefanie A1 - Hagen, Gunter A1 - Maerkl, Susanne A1 - Haft, Gerhard A1 - Dietrich, Markus A1 - Moos, Ralf A1 - Gaderer, Matthias A1 - Rabl, Hans-Peter T1 - A Synthetic Ash-Loading Method for Gasoline Particulate Filters with Active Oil Injection JF - SAR International Journal of Engines N2 - To reduce particulate emissions, the use of particulate filters in diesel engines is meanwhile state of the art, while the integration of such systems in gasoline engines is now also necessary in order to comply with today's regulations. Over its lifetime, a gasoline particulate filter (GPF) collects ash components of fuel, lubrication oil, and materials originating from the catalytic coating and from engine abrasion. In the development and application process, synthetic ashing from GPFs is challenging. The ash of the lubrication oil can be increased in various ways, like oil-doped fuel, a separate oil burner, or changes in the piston-cylinder system of the engine. However, these methods show major disadvantages. For this reason, an improved approach is presented in this study, which allows a quick response to changes in combustion (e.g., engine knocking) and producing ash, which is more realistic due to its primary particle size and the density of ash plugs, in a shorter time. Therefore, an approach to accelerate ash loading by active oil injection using a multi-point injection (MPI) system is introduced. With the help of this methodology, an ashing capacity of 1.21 g/h is implemented, which is a high rate compared to other investigations. The primary particle size (evaluated by means of a transmission electron microscope), is in the same size range as those detected at the full-load curve during regular operation. A computer tomographic (CT) analysis of the incinerated particulate filter also shows that a very high density of ash plugs can be realized, which has also been found in the literature for real applications. In addition, with the help of a mass spectrometer (MS) and an intermediate weighing of the particulate filter, the current ash loading of the GPF could be determined with an accuracy of 1%. KW - Ash KW - GDI KW - GPF KW - Particle Y1 - 2021 U6 - https://doi.org/10.4271/03-14-04-0029 SN - 1946-3936 SN - 1946-3944 VL - 14 IS - 4 SP - 493 EP - 506 PB - SAE International ER - TY - JOUR A1 - Schmidt, Henrik A1 - Straub, Benedikt B. A1 - Sindersberger, Dirk A1 - Bröckel, Ulrich A1 - Monkman, Gareth J. A1 - Auernhammer, Günter T1 - Collision and separation of nickel particles embedded in a Poly dimethylsiloxan matrix under a rotating magnetic field: A strong magneto active function JF - Colloid and Polymer Science N2 - In order to function as soft actuators, depending on their field of use, magnetorheological elastomers (MREs) must fulfill certain criteria. To name just a few, these can include rapid response to external magnetic fields, mechanical durability, mechanical strength, and/or large deformation. Of particular interest are MREs which produce macroscopic deformation for small external magnetic field variations. This work demonstrates how this can be achieved by just a small change in magnetic field orientation. To achieve this, (super)paramagnetic nickel particles of size ≈ 160 μm were embedded in a non-magnetic polydimethylsiloxan (PDMS) (661–1301 Pa) and their displacement in a stepwise rotated magnetic field (170 mT) recorded using a video microscope. Changes in particle aggregation resulting from very small variations in magnetic field orientation led to the observation of a new strongly magneto-active effect. This configuration is characterized by an interparticle distance in relation to the angle difference between magnetic field and particle axis. This causes a strong matrix deformation which in turn demonstrates hysteresis on relaxation. It is shown that the occurrence strongly depends on the particle size, particle distance, and stiffness of the matrix. Choosing the correct parameter combination, the state can be suppressed and the particle-matrix system demonstrates no displacement or hysteresis. In addition, evidences of non-negligible higher order magnetization effects are experimentally ascertained which is qualitatively in agreement with similar, already theoretically described, particle systems. Even at larger particle geometries, the new strongly magneto-active configuration is preserved and could create macroscopic deformation changes. Y1 - 2021 U6 - https://doi.org/10.1007/s00396-020-04784-4 VL - 299 SP - 955 EP - 967 PB - Springer ER - TY - CHAP A1 - Rieger, Anna A1 - Oetjen, Arne A1 - van de Par, Steven A1 - Rabl, Hans-Peter T1 - Gehörbezogene Modellierung der Dissonanz T2 - Tagungsband DAGA 2021: 47. Jahrestagung für Akustik, 15.-18. August 2021, Wien und Online Y1 - 2021 UR - https://www.dega-akustik.de/publikationen/online-proceedings/ VL - 47 SP - 1034 EP - 1037 PB - Deutsche Gesellschaft für Akustik e.V. ER - TY - CHAP A1 - Bauer, Franz A1 - Gawlik, Julia A1 - Sterner, Michael A1 - Hamacher, Thomas ED - Ausfelder, Florian ED - Dura, Hanna T1 - Übergreifende Energiesystemmodellierung T2 - Optionen für ein nachhaltiges Energiesystem mit Power-to-X-Technologien: Transformation - Anwendungen – Potentiale. 3. Roadmap des Kopernikus-Projektes P2X, Phase II Y1 - 2021 UR - https://www.kopernikus-projekte.de/lw_resource/datapool/systemfiles/elements/files/CBE2878A53D522EEE0537E695E868061/live/document/DEC_P2X_II_V06_Online_small.pdf SN - 978-3-89746-236-6 SP - 19 EP - 33 PB - DECHEMA Gesellschaft für Chemische Technik und Biotechnologie e.V. CY - Frankfurt a.M. ER - TY - JOUR A1 - Lindner, Matthias A1 - Pipa, Andrei V. A1 - Karpen, Norbert A1 - Hink, Ruediger A1 - Berndt, Dominik A1 - Foest, Rüdiger A1 - Bonaccurso, Elmar A1 - Weichwald, Robert A1 - Friedberger, Alois A1 - Caspari, Ralf A1 - Brandenburg, Ronny A1 - Schreiner, Rupert T1 - Icing Mitigation by MEMS-Fabricated Surface Dielectric Barrier Discharge JF - Applied Sciences N2 - Avoiding ice accumulation on aerodynamic components is of enormous importance to flight safety. Novel approaches utilizing surface dielectric barrier discharges (SDBDs) are expected to be more efficient and effective than conventional solutions for preventing ice accretion on aerodynamic components. In this work, the realization of SDBDs based on thin-film substrates by means of micro-electro-mechanical-systems (MEMS) technology is presented. The anti-icing performance of the MEMS SDBDs is presented and compared to SDBDs manufactured by printed circuit board (PCB) technology. It was observed that the 35 mu m thick electrodes of the PCB SDBDs favor surface icing with an initial accumulation of supercooled water droplets at the electrode impact edges. This effect was not observed for 0.3 mu m thick MEMS-fabricated electrodes indicating a clear advantage for MEMS-technology SDBDs for anti-icing applications. Titanium was identified as the most suitable material for MEMS electrodes. In addition, an optimization of the MEMS-SDBDs with respect to the dielectric materials as well as SDBD design is discussed. KW - aerospace engineering KW - anti-icing KW - DBD PLASMA ACTUATORS KW - EXCITATION KW - FLOW-CONTROL KW - low-temperature plasma KW - MEMS KW - SEPARATION CONTROL KW - SDBD Y1 - 2021 U6 - https://doi.org/10.3390/app112311106 N1 - Corresponding author: Matthias Lindner VL - 11 IS - 23 SP - 1 EP - 17 PB - MDPI CY - Basel ER -