TY - CHAP A1 - De, Sangita A1 - Niklas, Michael A1 - Mottok, Jürgen A1 - Brada, Přemek T1 - A Semantic Analysis of Interface Description Models of Heterogeneous Vehicle Application Frameworks: An Approach Towards Synergy Exploration T2 - MODELSWARD 2019: Proceedings of the 7th International Conference on Model-Driven Engineering and Software Development, 20.02.2019 - 22.02.2019, Prague, Czech Republic N2 - As the world is getting more connected, the demands of services in automotive industry are increasing with the requirements such as IoT (Internet of Things) in cars, automated driving, etc. Eventually, the automotive industry has evolved to a complex network of servi ces, where each organization depends on the other organizations, to satisfy its service requirements in different phases of the vehicle life cycle. Because of these heterogeneous and complex development environments, most of the vehicle component interface models need to be specified in various manifest ations to satisfy the semantic and syntactic requirements, specific to different application development environments or frameworks. This paperdescribes an approach to semantic analysis of components interfaces description models of heterogeneous frameworks, that are used for vehicle applications. The proposed approach intends to ensure that interface description models of different service-based vehicle frameworks can be compared, correlated and re-used based on semantic synergies, across different vehicle platforms, development environments and organizations. The approach to semantic synergy exploration could further provide the knowledge base for the increase in interoperability, overall efficiency and development of an automotive domain specific general software solutions, by facilitating coexistence of components of heterogeneous frameworks in the same high-performance ECU for future vehicle software. KW - Application: Framework KW - IDL KW - Semantic: Mapping Y1 - 2019 SN - 978-989-758-358-2 SP - 394 EP - 401 PB - SCITEPRESS ER - TY - JOUR A1 - Diermeier, Andreas A1 - Sindersberger, Dirk A1 - Krenkel, Lars A1 - Rosell, X. C. A1 - Monkman, Gareth J. T1 - Controllable Magnetoactive Polymer Conduit JF - The Open Mechanical Engineering Journal N2 - Objective: Magneto-active Polymers (MAP) are smart materials whose mechanical characteristics, such as elastic and shear moduli, may be controllable by means of an externally applied magnetic field. Methods: Various additives may be used to influence the characteristics of the polymer matrix whilst a suspension of soft and/or hard magnetic particles determine the magnetic properties of the composite. Both pre-cure and post-cure magnetization is possible. Results: A range of control strategies have been investigated for evaluation of the system using fluids of differing kinematic viscosity. Conclusion: Depending on the degree of magnetic field homogeneity, magneto-deformation and magnetostriction contribute to MAP actuation. This paper presents a novel application in the form of a peristaltic MAP tube system, applicable to flow control and pumping of hemorheological fluids in blood circulatory systems for biomedical research purposes. Y1 - 2018 UR - https://www.benthamopen.com/ABSTRACT/TOMEJ-12-192 N1 - Corresponding authro: Gareth J. Monkman VL - 12 IS - 1 SP - 192 EP - 200 PB - Bentham ER - TY - JOUR A1 - Fuhrmann, Thomas A1 - Mottok, Jürgen T1 - Ethical, intercultural and professional impulses integrated into a transmission systems lecture JF - 2017 IEEE Global Engineering Education Conference (EDUCON), 25-28 April 2017, Athens, Greece N2 - In the sixth semester of the bachelor study course “Electrical Engineering and Information Technology”, a lecture “Transmission Systems” is given. It explains basic principles, circuits and systems of electrical and optical transmission systems. Short intellectual impulses, which address professional, intercultural and ethical issues of engineers' working life are integrated into this regular lecture. In each lecture unit, an impulse with one specific topic is given approximately in the middle of the lecture hour. An evaluation was done at the end of the semester, which shows that most of the students remember the discussed topics and state high interest due to high importance for their professional life. Due to these encouraging results, this concept will be developed further. KW - Engineering Education KW - Ethics Education KW - Electrical Engineering Y1 - 2017 U6 - https://doi.org/10.1109/EDUCON.2017.7942829 SP - 92 EP - 95 PB - IEEE ER - TY - JOUR A1 - De, Sangita A1 - Premek, Brada A1 - Mottok, Jürgen T1 - Derivation of Optimized Threshold of Semantic Alignment Metrics for Intepretation of Interoperability and Reusability of Cross-enterprise Vehicle Service Interface Models JF - Informatica N2 - Over the past decade, cars have turned gradually into real cyber physical systems. The collaboration of services between the service-oriented, cross-enterprise vehicle application frameworks has increased to generate novel, smart and complicated vehicle services. Consequently, from an interoperability perspective, semantically mapping of vehicle service component’s interface ontological models emerged as a big research interest in automotive application domain that manipulates several cross-enterprise synergy knowledge applications frameworks. The ontological metamodeling lays the foundation for building semantic bridge and exploring semantic associations between service components’ interface models based on the domain knowledge for semantic interoperability. Also, several semantic quality metrics has been defined over time for the vehicle service interface ontological metamodels. The empirically evaluated values of these metrics can be used to assess progress in cross-enterprise interoperability between the service and the clients’ APIs ontological models in vehicle domain. Despite potential benefits of semantic alignment quality metrics, the effective use of these metrics for vehicle service interface ontologies have proven elusive. Yes, such metrics can be used successfully for quantification, but then they mostly fail to provide adequate annotations in subsequent decision-making in the direction of semantic interoperability and reusability. The effective use of ontology semantic alignment quality metrics is basically hindered in the absence of the meaningful thresholds. In fact, the absence of an effective and meaningful threshold for the semantic similarity measure between various vehicle service interface ontological metamodels, motivates this research work which not only proposes a design approach to an optimized threshold for the semantic similarity metrics but also applies this threshold on few defined semantic alignment quality metrics. This paper also uses a real-world vehicle domain industrial case study to illustrate the design approach. KW - interface KW - automotive services KW - semantic KW - metrics KW - optimized threshold KW - framework KW - metamodels KW - ontologies Y1 - 2023 U6 - https://doi.org/10.31449/inf.v47i7.4739 SN - 0350-5596 VL - 47 IS - 7 PB - Slovenian Society Informatika ER - TY - CHAP A1 - Franke, Ariane ED - Uhl, Christian ED - Walter, Michael ED - Stiehl, Annika T1 - Electricity load forecasting for industrial microgrid and load management T2 - Applied Research Conference 2022 Conference Proceedings: 4th July 2022, University of Applied Sciences Ansbach (Onsite Conference) N2 - As more energy systems from renewable sources and the electricity market becomes more volatile, new solutions to ensure the security of supply are tested. Microgrids offer a possibility to prevent construction downtime. In order to use the energy sources and storage facilities of the microgrid effectively, load forecasting algorithms are essential. Thus, in this study a short term load forecasting model for a construction company is designed, that will be used for managing a microgrid as well as the general load consumption. This paper proposes the use of the XGBoost algorithm for the 36-hour forecast including predictors based on past measurements as well as information extracted from the timestamp. Moreover, it is shown that including load profiles attained by conventional methods has the potential to improve the accuracy of the model. KW - load forecast KW - XGBoost KW - load profile Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-68231 SP - 405 EP - 409 PB - Hochschule Ansbach CY - Ansbach ER - TY - JOUR A1 - Huber, Lea A1 - Heindl, Melanie A1 - Schlosser, Marc A1 - Pfitzner, Arno A1 - Dawoud, Belal T1 - On the Cycle Stability and Macroscopic Structure of Iron Oxide Pellets for Thermochemical Hydrogen Storage: Influence of Water Content during the Pelletizing Process JF - Applied Sciences N2 - Hydrogen storage based on the repeated reduction and oxidation (redox) reactions of iron oxide/iron composites represents a promising technology. This work is dedicated to studying the influence of the amount of water added during the pelletizing process on the cycle stability and structure of iron oxide pellets. The storage composites were prepared from iron oxide (Fe2O3) and 10 wt.-% support material (cement) with different amounts of water (18 and 33 wt.-%) in a laboratory-scale pelletizing disk. To evaluate the cycle stability of the composites, the kinetics of the redox reactions were experimentally measured at 800 ∘ C in an atmosphere of 50% N2 and 50% H2 (reduction) or 50% steam (oxidation), respectively. Moreover, the structure of the pellets was analyzed by micro-computed tomography scans. It turned out that pellets with higher water contents attained faster kinetics and a higher cycle stability. The sample with the least water content (18 wt.-%) needed about 26 min and 19 min to reach a conversion rate of 80% during the reduction and oxidation reactions of the sixth redox cycle, respectively. In contrast, the sample with the highest water content (33 wt.-%) could achieve the same conversion rate after 18 min (reduction) and 13 min (oxidation) during the ninth redox cycle. KW - hydrogen storage KW - redox reactions KW - iron/iron oxide KW - pelletizing process KW - cycle stability KW - water content Y1 - 2023 U6 - https://doi.org/10.3390/app13116408 N1 - Corresponding author: Belal Dawoud VL - 13 IS - 11 PB - MDPI CY - 16 ER - TY - JOUR A1 - Walter, Stefanie A1 - Schwanzer, Peter A1 - Hagen, Gunter A1 - Rabl, Hans-Peter A1 - Dietrich, Markus A1 - Moos, Ralf T1 - Combined Ash and Soot Monitoring for Gasoline Particulate Filters Using a Radio-Frequency-Based Sensor JF - Emission Control Science and Technology N2 - Increasingly stringent emission limits have made particulate filters necessary for gasoline engines. Similar to diesel applications, gasoline particulate filters (GPFs) can be monitored by differential pressure measurement or by the radio-frequency-based filter diagnosis (RF sensor). In addition to measuring the soot loading, ash detection is critical for monitoring the GPF over the entire vehicle lifetime. Because the RF sensor detects the filter loading through a change in the dielectric properties of the GPF, it can detect not only soot but also ash. In diesel applications, the RF sensor has already demonstrated its potential for ash detection. To verify the feasibility of simultaneous ash and soot monitoring for GPFs, filters were loaded with ash on an engine test bench and measured on a lab test bench under defined synthetic exhaust gas conditions. By evaluating resonant modes, soot and ash could be clearly distinguished, as ash mainly affects the resonant frequency, while soot also changes the quality factor due to its high dielectric losses. However, higher soot loadings could not be detected by the resonant parameters, but instead by a frequency-averaged transmission signal. While the presence of ash caused an offset in this signal, its sensitivity to soot was not affected. Thus, the influence of ash can be corrected if the signal in the soot-free filter state is known, e.g., from the behavior of the resonant parameters. Therefore, even with a continuously increasing ash loading over the lifetime of a vehicle, an accurate soot detection is possible with the RF sensor. KW - Gasoline particulate flter KW - Radio-frequency KW - Soot mass determination KW - Ash detection Y1 - 2023 U6 - https://doi.org/10.1007/s40825-023-00235-y PB - Springer ER - TY - CHAP A1 - Bauer, Franz A1 - Gawlik, Julia A1 - Sterner, Michael A1 - Hamacher, Thomas ED - Ausfelder, Florian ED - Du Tran, Dinh T1 - Übergreifende Energiesystemmodellierung T2 - Optionen für ein nachhaltiges Energiesystem mit Power-to-X-Technologien: Transformation - Anwendungen – Potentiale. 4. Roadmap des Kopernikus-Projektes P2X, Phase II Y1 - 2022 UR - https://www.kopernikus-projekte.de/lw_resource/datapool/systemfiles/elements/files/EC7C18F68BCE7C0DE0537E695E86F60F/live/document/221025_DEC_P2X4_V08_Web.pdf SN - 978-3-89746-238-0 SP - 17 EP - 35 PB - DECHEMA Gesellschaft für Chemische Technik und Biotechnologie e.V. CY - Frankfurt a.M. ER - TY - CHAP A1 - Bauer, Franz A1 - Gawlik, Julia A1 - Sterner, Michael A1 - Hamacher, Thomas ED - Ausfelder, Florian ED - Dura, Hanna T1 - Übergreifende Energiesystemmodellierung T2 - Optionen für ein nachhaltiges Energiesystem mit Power-to-X-Technologien: Transformation - Anwendungen – Potentiale. 3. Roadmap des Kopernikus-Projektes P2X, Phase II Y1 - 2021 UR - https://www.kopernikus-projekte.de/lw_resource/datapool/systemfiles/elements/files/CBE2878A53D522EEE0537E695E868061/live/document/DEC_P2X_II_V06_Online_small.pdf SN - 978-3-89746-236-6 SP - 19 EP - 33 PB - DECHEMA Gesellschaft für Chemische Technik und Biotechnologie e.V. CY - Frankfurt a.M. ER - TY - GEN A1 - Walter, Stefanie A1 - Schwanzer, Peter A1 - Hagen, Gunter A1 - Rabl, Hans-Peter A1 - Dietrich, Markus A1 - Moos, Ralf T1 - Combined Ash and Soot Monitoring in Gasoline Particulate Filters with a Radio-Frequency-Based Sensor T2 - SAE World Congress Experience, April 5-7, 2022, Detroit, Michigan, USA N2 - In recent years, it turned out that primarily the number of ultrafine particles and not their mass is relevant in terms of harmful health effects. Therefore, exhaust emission standards are constantly being tightened with regard to the particulate number. To meet the emission limits, particulate filters have become necessary for gasoline engines. Similar to diesel applications, gasoline particulate filters (GPFs) can be monitored via differential pressure measurement or via a radio-frequency approach (RF-sensor). The latter is based on the influence of the soot conductivity on the electromagnetic field. To control the GPF, ash detection is of crucial importance besides the soot load monitoring. With the differential pressure system, this is only possible with high uncertainties due to the low pressure increase caused by ash. The RF-sensor, however, has already demonstrated its potential for ash detection in diesel applications. In order to verify the applicability of the system for GPFs, filters were loaded via a method for fast ash loading. Thereby, it was shown that by evaluating resonant modes – especially the resonant frequency – the ash loading can easily be measured as long as the filter is soot-unloaded. In contrast, soot loading can be determined independently from this by considering a frequency-averaged transmission signal between the antennas of the RF-sensor. Using a setup for radio-frequency material characterization, the dielectric parameters of the generated ash were also measured. In comparison with the properties of the synthetic soot PrintexU, ash showed significantly lower dielectric losses. Thus, the evaluation of the loss-dependent quality factor, which is only possible at low soot loadings, allows a precise conclusion whether the filter is completely soot-free. Furthermore, using synthetic soot loading, it could be shown that soot detection via the averaged transmission signal is not affected by ash. In summary, it could be shown that with the RF-sensor, ash and soot can be simultaneously detected. Y1 - 2022 UR - https://eref.uni-bayreuth.de/id/eprint/69506 ER -