TY - CHAP A1 - Sterner, Michael A1 - Bauer, Franz A1 - Crotogino, Fritz A1 - Eckert, Fabian A1 - von Olshausen, Christian A1 - Teichmann, Daniel A1 - Thema, Martin T1 - Chemische Energiespeicher T2 - Energiespeicher - Bedarf, Technologien, Integration KW - Energiespeicher KW - Elektrochemisches Verfahren KW - Elektrochemische Energieumwandlung Y1 - 2017 SN - 978-3-662-48893-5 SN - 978-3-662-48892-8 U6 - https://doi.org/10.1007/978-3-662-48893-5_8 SP - 327 EP - 493 PB - Springer Vieweg CY - Berlin ; Heidelberg ET - 2. Auflage ER - TY - CHAP A1 - Stadler, Ingo A1 - Bauer, Franz A1 - Budt, Marcus A1 - Heindl, Eduard A1 - Wolf, Daniel T1 - Mechanische Energiespeicher T2 - Energiespeicher - Bedarf, Technologien, Integration Y1 - 2017 SN - 978-3-662-48893-5 SN - 978-3-662-48892-8 U6 - https://doi.org/10.1007/978-3-662-48893-5_9 SP - 495 EP - 577 PB - Springer Vieweg CY - Berlin ; Heidelberg ET - 2. Auflage ER - TY - CHAP A1 - Sterner, Michael A1 - Bauer, Franz T1 - Definition und Klassifizierung von Energiespeichern T2 - Energiespeicher - Bedarf, Technologien, Integration KW - Energiespeicher Y1 - 2017 SN - 978-3-662-48892-8 U6 - https://doi.org/10.1007/978-3-662-48893-5_2 SP - 25 EP - 49 PB - Springer Vieweg CY - Berlin ; Heidelberg ET - 2. Auflage ER - TY - RPRT A1 - Sörgel, Dominika A1 - Luderer, Gunnar A1 - Emelianova, Polina A1 - Koch, Otto A1 - Timpe, Christof A1 - Bauer, Franz A1 - Sterner, Michael T1 - Kopernikus-Szenarienvergleich - Robuste Eigenschaften von Klimaschutzpfaden zur Treibhausgasneutralität 2045 und relevante Unsicherheiten N2 - Im Rahmen der vier Kopernikus-Projekte – Ariadne, ENSURE, P2X und SynErgie – wird die Transformation des deutschen Energiesystems hin zur Klimaneutralität analysiert. Im vorliegenden Bericht werden hierbei robuste Kernaussagen und relevante Unsicherheiten derjenigen Szenarien der Kopernikus-Schwesterprojekte dargestellt, die zur Zielsetzung die Klimaneutralität 2045 haben. Hierbei liegt der Fokus auf Indikatoren, die eine besonders hohe klimapolitische Relevanz haben. Y1 - 2023 UR - https://publications.pik-potsdam.de/pubman/faces/ViewItemFullPage.jsp?itemId=item_29216 PB - Kopernikus-Projekte CY - Potsdam ER - TY - CHAP A1 - Bauer, Franz A1 - Gawlik, Julia A1 - Sterner, Michael A1 - Hamacher, Thomas ED - Ausfelder, Florian ED - Du Tran, Dinh T1 - Übergreifende Energiesystemmodellierung T2 - Optionen für ein nachhaltiges Energiesystem mit Power-to-X-Technologien: Transformation - Anwendungen – Potentiale. 4. Roadmap des Kopernikus-Projektes P2X, Phase II Y1 - 2022 UR - https://www.kopernikus-projekte.de/lw_resource/datapool/systemfiles/elements/files/EC7C18F68BCE7C0DE0537E695E86F60F/live/document/221025_DEC_P2X4_V08_Web.pdf SN - 978-3-89746-238-0 SP - 17 EP - 35 PB - DECHEMA Gesellschaft für Chemische Technik und Biotechnologie e.V. CY - Frankfurt a.M. ER - TY - JOUR A1 - Gamisch, Bernd A1 - Ettengruber, Stefan A1 - Gaderer, Matthias A1 - Dawoud, Belal T1 - Dynamic simulation of isothermal and non-isothermal reduction and oxidation reactions of iron oxide for a hydrogen storage process JF - Renewable and Sustainable Energy N2 - This work aims first to develop a dynamic lumped model for the isothermal reactions of hydrogen/steam with a single iron oxide/iron pellet inside a tubular reactor and to validate the model results against the experimental reaction kinetic data with the help of our STA device. To describe the temporal change in mass, and consequently, the temporal heat of reaction, the shrinking core model, based on the geometrical contracting sphere, is applied. It turned out that, the simulation model can reproduce the experimental, temporal concentration and temperature-dependent conversion rates with a maximum deviation of 4.6% during the oxidation reactions and 3.1% during the reduction reactions. In addition, a measured isothermal storage process comprising one reduction and one oxidation phase with a holding phase in between on a single reacting pellet could be reproduced with a maximum absolute deviation in the conversion rate of 1.5%. Moreover, a lumped, non-isothermal simulation model for a pelletized tubular redox-reactor including 2kg of iron oxide pellets has been established, in which the heat of reaction, heat transfer to the ambient and heat transfer between the solid and gas phases are considered. The temporal courses of the outlet gas concentration as well as the temperatures of the gas stream and the solid material at a constant input gas flow rate and a constant reacting gas inlet concentration but different input gas temperatures are estimated. Because of the endothermic nature of the reduction reaction, the inlet reacting gas temperature shall be kept high to prevent the severe temperature drop in the solid phase and, consequently, the significant reduction of the reaction rate. Contrary to that, the oxidation process requires lower input gas temperatures to avoid the excessive overheating of the reaction mass and, consequently, the sintering of the reacting pellets. Finally, five of the previous reactors have been connected in series to explore the influence of the changing inlet gas temperatures and concentrations on the dynamic performance of each storage mass. KW - hydrogen storage KW - iron/iron oxide KW - redox reactions KW - lumped model KW - isothermal reactions KW - non-isothermal reactions KW - kinetics of reactions KW - Aspen Custom Modeler Y1 - 2023 U6 - https://doi.org/10.55092/rse20230004 N1 - Corresponding author: Belal Dawoud VL - 1 IS - 1 PB - ELSP, International Open Science Platform ER - TY - CHAP A1 - Wagner, Marcus A1 - Lehrer, Tobias A1 - Franke, Markus A1 - Al-Abadi, Ali A1 - Gamil, Ahmed T1 - A Tank Resonance Model for Power Transformers T2 - ARWtr 2022 proceedings, 2022 7th Advanced Research Workshop on Transformers (ARWtr): October (23)24-26, 2022, Baiona, Spain N2 - During the factory acceptance test, the sound levels are measured. If the measured sound levels exceed pre-specified values, modifications on the transformer’s active part and/or tank need to be conducted. Tank resonance, if occurs, at twice main power frequency and its higher harmonics is one of the main reasons of amplifying the generated sound levels. Therefore, it is preferable to know already in the design stage about the occurrence of the tank resonance and propose reliable tank solutions. The current study presents a newly developed model for calculating the mode shapes and its corresponding eigenfrequencies of the tank. Y1 - 2022 U6 - https://doi.org/10.23919/ARWtr54586.2022.9959917 SP - 7 EP - 12 PB - IEEE ER - TY - JOUR A1 - Klenk, Eva Marianne A1 - Galka, Stefan T1 - Analysis of real-time tour building and scheduling strategies for in-plant milk-run systems with volatile transportation demand JF - IFAC - PapersOnLine N2 - In modern manufacturing systems, milk run (MR) systems represent route-based, cyclic material-handling systems that are used widely and enable frequent deliveries of containerized parts in small lot sizes from a central storage area to multiple points of use on the factory floor. Usually, deliveries take place at predetermined, constant time intervals. As in real-world MR systems, the number of containers to deliver in each interval varies in the short term, peaks in the number of deliveries may lead to capacity bottlenecks and late deliveries. In this paper, we develop three alternative strategies to determine starting times of MR cycles in real-time based on the current number of delivery orders in the system aiming to better handle variations in the number of orders. We evaluate the three strategies for different system load scenarios with respect to delivery service levels, order lead times, systems utilization and necessary number of MR trains using a discrete-event simulation model. KW - Control algorithms KW - Logistics KW - Material handling KW - Milk-run systems KW - Production systems KW - Real-time decision making KW - Transportation control Y1 - 2019 U6 - https://doi.org/10.1016/j.ifacol.2019.11.517 VL - 52 IS - 13 SP - 2110 EP - 2115 PB - Elsevier ER - TY - JOUR A1 - Heberl, Michael A1 - Withelm, Christian A1 - Kaul, Anja A1 - Rank, Daniel A1 - Sterner, Michael T1 - Prospective Life Cycle Assessment of Biological Methanation in a Trickle-Bed Pilot Plant and a Potential Scale-Up JF - Energies N2 - The fluctuating nature of renewable energies results in the need for sustainable storage technologies to defossilize the energy system without other negative consequences for humans and the environment. In this study, a pilot-scale trickle-bed reactor for biological methanation and various scale-up scenarios for 2024 and 2050 were investigated using life cycle assessment. A best- and worst-case scenario for technology development until 2050 was evolved using cross-consistency analysis and a morphological field, based on which the data for the ecological models were determined. The results show that the plant scale-up has a very positive effect on the ecological consequences of methanation. In the best-case scenario, the values are a factor of 23–780 lower than those of the actual plant today. A hot-spot analysis showed that electrolysis operation has an especially large impact on total emissions. The final Monte Carlo simulation shows that the technology is likely to achieve a low global warming potential with a median of 104.0 kg CO2-eq/MWh CH4 and thus can contribute to decarbonization. KW - Ökobilanzierung KW - Power-to-Gas KW - Elektrolyse KW - Methanisierung KW - erneuerbare Energien Y1 - 2024 U6 - https://doi.org/https://doi.org/10.3390/en17092206 SN - 1996-1073 VL - 17 IS - 9 PB - MDPI AG CY - Basel ER - TY - INPR A1 - Takayasu, Anna A1 - Weikl, Simone A1 - Dahmen, Victoria A1 - Bogenberger, Klaus T1 - Impact of Travel Stress and Infrastructure Quality on Cycling Mode Share: Insights From Multimodal Trajectory and Survey Data Analysis N2 - This study explores the relationship between travel stress, infrastructure quality, and cycling mode share. Utilizing multimodal trajectory data, survey responses on travel stress, and detailed road network information with geological and bicycle facility data, the study analyzes correlations between actual and perceived infrastructure quality, travel stress, and cycling mode share, as well as the impact of travel time and distance on cycling mode share. The results indicate significant correlations between perceived infrastructure quality and travel stress levels, and between travel stress levels and cycling mode share, particularly among regular bike users. However, clear correlations between actual and perceived infrastructure quality, and between perceived infrastructure quality and cycling mode share, were not observed. Additionally, direct effects of travel time and distance on cycling mode share were not evident. From these findings, three main insights emerge. Firstly, accurately estimating cycling mode share requires considering multiple parameters beyond travel time and distance. Secondly, to implement effective measures for bicycle facilities, a detailed analysis of perceived infrastructure quality, incorporating actual infrastructure design, is crucial. Lastly, travel stress, when carefully assessed with consideration of various factors beyond infrastructure design, emerges as a key determinant of travel mode choice. These insights have significant implications for future cycling research, including the development of travel mode choice models and estimating cycling demand. The study's valuable contributions advance efforts to promote cycling as a sustainable and preferred mode of transportation. Y1 - 2023 U6 - https://doi.org/10.13140/RG.2.2.30696.85766 PB - Researchgate ER -