TY - JOUR A1 - Sýkora, Miroslav A1 - Diamantidis, Dimitris A1 - Holický, Milan A1 - Marková, Jana A1 - Rózsás, Árpád T1 - Assessment of compressive strength of historic masonry using non-destructive and destructive techniques JF - Construction and Building Materials N2 - Masonry structures were built by various techniques using different materials, the properties of which exhibit a considerable scatter dependent on periods of construction and region-specific conditions. For historic structures with a heritage value, various non- or minor-destructive tests (NDTs) are commonly applied, while the application of destructive tests (DTs) is minimized. The contribution is based on investigations of 15 historic stone and clay brick masonry structures, for which NDT strengths of masonry units are verified by DTs. The proposed operational approach makes it possible to account for statistical uncertainty due to a limited number of DTs used to calibrate NDTs. KW - Calibration KW - Clay bricks KW - Compressive strength KW - Mortar KW - Non-destructive test KW - Statistical analysis KW - Stone masonry KW - Uncertainty Y1 - 2018 U6 - https://doi.org/10.1016/j.conbuildmat.2018.10.180 VL - 193 IS - December SP - 196 EP - 210 PB - Elsevier ER - TY - JOUR A1 - Kaspar, Marcel A1 - Rabl, Hans-Peter A1 - Mayer, Wolfgang T1 - Ion-Molecule Reaction for the Selective Detection of Hydrocarbons in Diesel Exhaust Gas JF - Chemie Ingenieur Technik N2 - The hydrocarbons present in the diesel exhaust gas are analyzed. A mass spectrometer is used for the measurements, and it operates on the basis of an ion-molecule reaction. This method is especially suitable because it is selective, is as free of fragments as possible, and is highly sensitive to the species that need to be measured. The study shows that numerous hydrocarbons in diesel exhaust gas can be identified. In particular, three molecules, ethyne, ethene and propene, were analyzed online in-depth on an engine test bench under different engine operating conditions. KW - Diesel exhaust gas KW - Hydrocarbons KW - Ion-molecule reaction KW - Mass spectrometry Y1 - 2018 U6 - https://doi.org/10.1002/cite.201700075 VL - 90 IS - 6 SP - 826 EP - 834 PB - WILEY-VCH ER - TY - JOUR A1 - Schorr, Philipp A1 - Böhm, Valter A1 - Zentner, Lena A1 - Zimmermann, Klaus T1 - Motion characteristics of a vibration driven mobile tensegrity structure with multiple stable equilibrium states JF - Journal of Sound and Vibration N2 - A novel type of a vibration driven motion system based on a compliant tensegrity structure with multiple stable equilibrium states is considered. These equilibrium configurations correspond to different prestress states with different dynamical properties. Therefore, the motion characteristics can be varied by changing the equilibrium state. For the application in the fields of mobile robotics, these discrete adjustable dynamics are advantageous. The vibration modes of the structure as well as the corresponding motion characteristics of the system can be adapted to the given environmental conditions in order to ensure a reliable motion. In this paper, dynamical investigations of an exemplary two-dimensional multistable tensegrity structure are considered. For the chosen parameter values the structure features two relevant equilibrium configurations. The resulting motion system is in contact to a horizontal plane due to gravity and the actuation is realized by the harmonic variation of the length of a single tensioned member. The motion of the system is simulated for various actuation frequencies with the different equilibrium states as an initial configuration. A uniaxial or a planar movement occurs depending on the selection of the actuated member within the tensegrity structure. The steady state motion is evaluated regarding motion characteristics like the steady state velocity. Moreover, the influences on the motion behavior caused by the different equilibrium states as an initial condition are emphasized. (C) 2018 Elsevier Ltd. All rights reserved. KW - Compliant tensegrity structure KW - LOCOMOTION KW - Multistability KW - Vibration driven motion Y1 - 2018 U6 - https://doi.org/10.1016/j.jsv.2018.09.019 VL - 437 IS - December SP - 198 EP - 208 PB - Elsevier ER - TY - JOUR A1 - da Silva Mota, Fabio Antonio A1 - Hinckel, Jose Nivaldo A1 - Rocco, Evandro Marconi A1 - Schlingloff, Hanfried T1 - Modeling and Analysis of a LOX/Ethanol Liquid Rocket Engine JF - Journal of Aerospace Technology and Management N2 - This work studies the performance and dry mass of the under development LOX/Ethanol L75 liquid rocket engine. To this end, an object-oriented program written in C++ was developed. The program is intended to be versatile and easily extensible in order to analyze different configurations of liquid rocket engines. The UML (Unified Modeling Language) tool is used to model the architecture of the codes. UML diagrams help to visualize the code structure and the communication between objects, enabling a high degree of abstraction. The cryogenics Vulcain and HM7B engines power cycles along with the staged-combustion SSME engine perform the verification of the codes. Finally, the influence of changes in design parameters on the performance and dry mass of the L75 rocket engine is analyzed. KW - Ethanol KW - Liquid rocket engines KW - Modeling Y1 - 2018 U6 - https://doi.org/10.5028/jatm.v10.914 VL - 10 PB - Inst Aeronautica & Espaco-IAE ER - TY - JOUR A1 - Braun, Peter A1 - Gebhard, Jürgen A1 - Matysik, Frank-Michael A1 - Rabl, Hans-Peter T1 - Potential Technical Approaches for Improving Low-Temperature NOx Conversion of Exhaust Aftertreatment Systems JF - Chemie Ingenieur Technik N2 - Lean-burn engines, such as diesel engines, are widely used in mobile and stationary applications. Operation of lean-burn engines leads to formation of distinct amounts of nitrogen oxides (NO and NO2). Efficient aftertreatment is mandatory to meet legal requirements, especially at low exhaust temperatures, as for the future a decline of the exhaust temperature level can be predicted due to improved engine efficiencies. Within this review, potential technical solutions to enhance the DeNO(x)-aftertreatment efficiency at low exhaust temperatures are presented. KW - DECOMPOSITION KW - Diesel Engine KW - Exhaust aftertreatment KW - IMPACT KW - Low-temperature DeNO(x) KW - NH3 KW - NITRIC-OXIDE KW - Nitrogen oxides KW - OXIDE CATALYST KW - PERFORMANCE KW - PYROLYSIS KW - SCR KW - Selective catalytic reduction KW - SELECTIVE CATALYTIC-REDUCTION KW - UREA HYDROLYSIS Y1 - 2018 U6 - https://doi.org/10.1002/cite.201700122 VL - 90 IS - 6 SP - 762 EP - 773 PB - WILEY-VCH ER - TY - JOUR A1 - Barz, Tilman A1 - Seliger, Dominik A1 - Marx, Klemens A1 - Sommer, Andreas A1 - Walter, Sebastian F. A1 - Bock, Hans Georg A1 - Koerkel, Stefan T1 - State and state of charge estimation for a latent heat storage JF - Control Engineering Practice N2 - A nonlinear state observer is designed for a thermal energy storage with solid/liquid phase change material (PCM). Using a physical 2D dynamic model, the observer reconstructs transient spatial temperature fields inside the storage and estimates the stored energy and the state of charge. The observer has been successfully tested with a lab-scale latent heat storage with a single pass tube bundle and the phase change material located in a shell around each tube. It turns out that the observer robustly tracks the real process data with as few as four internal PCM temperature sensors. © 2017 Elsevier Ltd. All rights reserved. KW - Heat conduction in cylindrical shell KW - Kalman filter KW - Latent heat thermal energy storage (LHTES) KW - MODEL KW - Nonlinear state observer KW - OF-THE-ART KW - Orthogonal collocation KW - PCM KW - PERFORMANCE ENHANCEMENT TECHNIQUES KW - PHASE-CHANGE MATERIAL KW - POLYETHYLENE KW - Reduced model KW - simulation KW - Solidification KW - State of charge (SOC) KW - SYSTEMS KW - THERMAL-ENERGY STORAGE Y1 - 2018 U6 - https://doi.org/10.1016/j.conengprac.2017.11.006 VL - 72 SP - 151 EP - 166 PB - Pergamon-Elsevier d. ER - TY - JOUR A1 - da Silva Mota, Fabio Antonio A1 - Hinckel, Jose Nivaldo A1 - Rocco, Evandro Marconi A1 - Schlingloff, Hanfried T1 - Trajectory Optimization of Launch Vehicles Using Object-oriented Programming JF - Journal of aerospace technology and management N2 - The aim of this study is to model launch vehicles with focus on 3-DOF trajectory optimization using a modular approach. Despite the large number of operational launch vehicles, they usually consist of basic components and subsystems. In other words, a launch vehicle is an assembly of stages, which in turn is divided into propellant system and engine, and the engine is an assembly of basic components such as pumps, turbines, combustion chamber, and nozzle. To allow future extension and reuse of the codes, a modular structure using object-oriented programming is used. Two formulations of state equations of the trajectory and two optimization methods are described. The launch vehicle performance will be measured by payload mass for a given mission. The simulations of the VLS-1, Ariane 5 and VLS-Alfa were performed and showed good agreement with the literature. KW - Launch vehicle KW - Object-oriented programming KW - Optimization KW - Trajectory Y1 - 2018 U6 - https://doi.org/10.5028/jatm.v10.948 VL - 10 PB - Institute of Aeronautics and Space ER - TY - JOUR A1 - Gärtner, Uwe A1 - Rabl, Hans-Peter A1 - Zink, Uwe T1 - Exhaust Gas Aftertreatment of the Future JF - MTZ worldwide Y1 - 2018 U6 - https://doi.org/10.1007/s38313-018-0060-2 VL - 79 IS - 7-8 SP - 70 EP - 75 PB - Springer ER - TY - JOUR A1 - Schümann, Malte A1 - Morich, J. A1 - Kaufhold, Tobias A1 - Böhm, Valter A1 - Zimmermann, Klaus A1 - Odenbach, Stefan T1 - A mechanical characterisation on multiple timescales of electroconductive magnetorheological elastomers JF - Magnetism and Magnetic Materials N2 - Magnetorheological elastomers are a type of smart hybrid material which combines elastic properties of a soft elastomer matrix with magnetic properties of magnetic micro particles. This leads to a material with magnetically controllable mechanical properties of which the magnetorheological effect is the best known. The addition of electroconductive particles to the polymer mix adds electrical properties to the material behaviour. The resulting electrical resistance of the sample can be manipulated by external magnetic fields and mechanical loads. This results in a distinct interplay of mechanical, electrical and magnetic effects with a highly complex time behaviour. In this paper a mechanical characterisation on multiple time scales was conducted to get an insight on the short and long-term electrical and mechanical behaviour of this novel material. The results show a complex resistivity behaviour on several timescales, sensitive to magnetic fields and strain velocity. The observed material exhibits fatigue and relaxation behaviour, whereas the magnetorheological effect appears not to interfere with the piezoresistive properties. Y1 - 2018 U6 - https://doi.org/10.1016/j.jmmm.2018.01.029 VL - 453 IS - May SP - 198 EP - 205 PB - Elsevier ER - TY - CHAP A1 - Hackl, Andreas A1 - Hirschberg, Wolfgang A1 - Lex, Cornelia A1 - Rill, Georg ED - Spiryagin, Maksym ED - Gordon, Timothy ED - Cole, Colin ED - McSweeney, Tim T1 - Tyre type dependent transient force behaviour by means of a maxwell model T2 - The Dynamics of Vehicles on Roads and Tracks : Proceedings of the 25th Symposium of the International Association of Vehicle System Dynamics (IAVSD 2017), Rockhampton, Queensland, Australia, 14-18 August 2017 N2 - The present papers deals with the usability of an extended Maxwell model to describe the tyre dynamics during transient driving manoeuvres. In the present article, the para-metrisation process of a dynamic tyre model is investigated in a first step, using measurement data of tyre forces from a flat trac tyre test bench, (IABG 2016). Two tyre types of dimensions 255/50 R19 and 175/55 R15 are used. The practical applicability is discussed, considering the measurement procedure and the parameter optimisation process. In a second step, the performance of the dynamic tyre model is validated using measurements of manoeuvres under higher dynamic excitation. As a last step, an outlook is given on further research planned in which the presented model and parametrisation are adapted to a larger frequency range. Y1 - 2018 SN - 1351057170 U6 - https://doi.org/10.1201/9781315265506 SP - 157 EP - 162 PB - CRC Press CY - London ER -