TY - CHAP A1 - Kral, Christian A1 - Haumer, Anton A1 - Grabner, Christian ED - Ao, Sio-Iong ED - Gelman, Len T1 - Broken Rotor Bars in Squirrel Cage Induction Machines – Modeling and Simulation T2 - Electronic Engineering and Computing Technology N2 - This paper presents a physical model of a squirrel cage induction machine with rotor topology. The machine is modeled in Modelica, an object oriented multi physical modeling system. The presented machine model is used to investigate electrical rotor asymmetries in induction machines. For the case of a single broken rotor bar a simulation model is compared with measurement results. KW - broken rotor bar KW - induction machines KW - Modelica KW - rotor asymmetries KW - squirrel cage Y1 - 2010 SN - 978-90-481-8775-1 SN - 978-90-481-8776-8 U6 - https://doi.org/10.1007/978-90-481-8776-8_8 SP - 81 EP - 91 PB - Springer CY - Dordrecht ER - TY - CHAP A1 - Kral, Christian A1 - Haumer, Anton ED - Schmidt, Matthias T1 - Object Oriented Modeling of Rotating Electrical Machines T2 - Advances in Computer Science and Engineering Y1 - 2011 SN - 978-953-307-173-2 SN - 978-953-51-5990-2 U6 - https://doi.org/10.5772/15898 SP - 135 EP - 160 PB - IntechOpen ER - TY - JOUR A1 - Kral, Christian A1 - Haumer, Anton A1 - Kapeller, Hansjörg A1 - Pirker, Franz T1 - Design and Thermal Simulation of Induction Machines for Traction in Electric and Hybrid Electric Vehicles JF - World Electric Vehicle Journal N2 - An electric traction machine for an electric or a hybrid electric vehicle is usually designed for a specific operating point or cycle. For such an operating point or cycle, the masses and the cooling circuit of the electric machine determine the time dependent temperature distribution within the machine. For a specific load cycle, the thermal simulation of the machine can reveal possible mass and size reductions for a given insulation class of the machine. In addition, such simulations allow the comparison of various cooling concepts. In the machine design process, the first step is a conventional electromagnetic machine design. From the geometric data of this design and the material properties, the parameters of a thermal equivalent circuit can be derived. The differential and algebraic equations of the thermal equivalent circuit are solved by a simulation tool to predict the temperatures of the critical parts in the electric machine. A thermal equivalent circuit is accurate enough to predict the thermal behavior of the critical parts in the electric machine, and yet not too complex, to obtain simulation results with moderate numerical effort. This enables an iterative design process to optimize the drive. KW - Induction Motor KW - Electric Drive KW - Modeling KW - Simulation KW - Thermal Management Y1 - 2007 U6 - https://doi.org/10.3390/wevj1010190 SN - 2032-6653 VL - 1 IS - 1 SP - 190 EP - 196 PB - MDPI ER - TY - CHAP A1 - Haumer, Anton T1 - Modeling and Control Design of an Educational Magnetic Levitation System T2 - Proceedings of the 15th International Modelica Conference 2023, Aachen, October 9-11 N2 - A magnetic levitation system is a perfect educational example of a nonlinear unstable system. Only with suitable control, a small permanent magnet can be held floating stable below a coil. After modeling and simulation of the system, control of the system can be developed. At the end, the control algorithm can be coded on a microcontroller, connected to a pilot plant. KW - mechatronics KW - magnetic levitation KW - time-discrete control KW - functional mockup interface Y1 - 2023 U6 - https://doi.org/10.3384/ecp204763 SN - 1650-3686 PB - Linköping University Electronic Press ER - TY - CHAP A1 - Bäuml, T. A1 - Haumer, Anton A1 - Kapeller, Hansjörg A1 - Starzinger, J. A1 - Farzi, P. T1 - Impact of inverter pulse inhibition on the high-voltage supply system of an electric vehicle — A simulative approach T2 - 2011 IEEE Vehicle Power and Propulsion Conference (VPPC 2011) : Powering sustainable transportation ; Chicago, Illinois, USA, 06. - 09.09.2011 N2 - This paper deals with a simulative approach for investigating the impact of inverter pulse inhibition during field weakening operation of permanent magnet synchronous machines and asynchronous induction machines. The modelling and simulation language Modelica is used to design models for the vehicle, the electric machine and the inverter in different abstraction levels. It is shown that when using a permanent magnet synchronous machine, a sudden breakdown of the field weakening current causes induction of high voltages in the stator windings. Hence, the electric system of the vehicle has to be protected against the resulting high currents. Furthermore precautions have to be taken to avoid dangerous driving conditions because of high braking torques in an inverter fault operation mode. In the case of the asynchronous induction machine an inverter pulse inhibition poses no big problem, neither for the electric system of the vehicle, nor the driver. KW - asynchronous machines KW - Connectors KW - electric vehicles KW - Inverters KW - invertors KW - Mathematical model KW - Object oriented modeling KW - permanent magnet machines KW - power engineering computing KW - Rotors KW - synchronous machines KW - Torque KW - Vehicles Y1 - 2011 SN - 978-1-61284-248-6 SN - 978-1-61284-247-9 SN - 978-1-61284-246-2 U6 - https://doi.org/10.1109/VPPC.2011.6043159 SP - 1 EP - 5 PB - IEEE CY - Piscataway, NJ ER - TY - CHAP A1 - Jungreuthmayer, C. A1 - Bauml, T. A1 - Winter, O. A1 - Ganchev, M. A1 - Kapeller, Hansjörg A1 - Haumer, Anton A1 - Kral, Christian T1 - Heat and fluid flow analysis of an internal permanent magnet synchronous machine by means of computational fluid dynamics T2 - 2011 IEEE International Electric Machines & Drives Conference (IEMDC 2011) ; Niagara Falls, Ontario, Canada, 15 - 18 May 2011 N2 - This paper presents a comprehensive computational fluid (CFD) model of a radial flux permanent magnet synchronous machine with interior magnets. In the CFD model the water jacket cooling and a simplified model of the topology of the distributed stator winding are considered. The heat sources of the CFD model are determined from a finite element analysis of the machine. The numerically determined temperature distributions of the machine are compared with measurement results from sensors located both in the stator and rotor. The particular focus of this paper is the analysis of the temperatures and the heat flow in the air gap and from the stator winding head and the rotor to the inner air. KW - CFD KW - computational fluid dynamics KW - Cooling KW - finite element analysis KW - interior magnet KW - permanent magnet machines KW - permanent magnet synchronous machine KW - Rotors KW - sensor placement KW - stators KW - synchronous machines KW - temperature KW - temperature distribution KW - thermal analysis Y1 - 2011 SN - 978-1-4577-0060-6 SN - 978-1-4577-0061-3 SN - 978-1-4577-0059-0 U6 - https://doi.org/10.1109/IEMDC.2011.5994651 SP - 515 EP - 520 PB - IEEE CY - Piscataway, NJ ER - TY - JOUR A1 - Gärtner, Sebastian A1 - Rank, Daniel A1 - Heberl, Michael A1 - Gaderer, Matthias A1 - Dawoud, Belal A1 - Haumer, Anton A1 - Sterner, Michael T1 - Simulation and Techno-Economic Analysis of a Power-to-Hydrogen Process for Oxyfuel Glass Melting JF - Energies N2 - As an energy-intensive industry sector, the glass industry is strongly affected by the increasingly stringent climate protection targets. As established combustion-based production systems ensure high process stability and glass quality, an immediate switch to low greenhouse gas emission processes is difficult. To approach these challenges, this work investigates a step-by-step integration of a Power-to-Hydrogen concept into established oxyfuel glass melting processes using a simulation approach. This is complemented by a case study for economic analysis on a selected German glass industry site by simulating the power production of a nearby renewable energy park and subsequent optimization of the power-to-hydrogen plant performance and capacities. The results of this study indicate, that the proposed system can reduce specific carbon dioxide emissions by up to 60%, while increasing specific energy demand by a maximum of 25%. Investigations of the impact of altered combustion and furnace properties like adiabatic flame temperature (+25 °C), temperature efficiency (∆ξ = −0.003) and heat capacity flow ratio (∆zHL = −0.009) indicate that pure hydrogen-oxygen combustion has less impact on melting properties than assumed so far. Within the case study, high CO2 abatement costs of 295 €/t CO2-eq. were determined. This is mainly due to the insufficient performance of renewable energy sources. The correlations between process scaling and economic parameters presented in this study show promising potential for further economic optimization of the proposed energy system in the future. KW - Power-to-Gas KW - Hydrogen KW - Electrolysis KW - Oxyfuel KW - Glass Industry Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:898-opus4-22713 N1 - Corresponding author: Sebastian Gärtner VL - 14 IS - 24 PB - MDPI ER -