TY - CHAP A1 - Croce, Valeria A1 - Diamantidis, Dimitris A1 - Sýkora, Miroslav ED - Bien, Jan T1 - Planning post earthquake surveys: assessments and reconstruction of small historical centres T2 - 1st IABSE Online Symposium 2020, Synergy of culture and civil engineering - history and challenges: Wrocław, Poland, 7-9 October 2020, Proceedings N2 - The contribution presents a methodological procedure for the management and planning of interventions after earthquake events in small historic centres. Reference is made to the case study of Castelluccio di Norcia, a village in the Apennine Mountains affected by the seismic sequence that hit Central Italy in 2016. The earthquake risk of the area and the damaging events of 2016 are critically reviewed. The implementation of cognitive analysis and the application of advanced survey techniques involving the use of nmanned Aerial Vehicles (UAVs) for the purposes of emergency management and monitoring of damaged areas are analysed. The outcomes, combined with the direct involvement of the local population, represent a complete and integrated approach allowing the definition of a) possible intervention strategies, b) related decision criteria and c) practical recommendations for the reconstruction and regeneration of Castelluccio, and, in general, of small historic centres damaged by catastrophic events. Y1 - 2021 UR - http://toc.proceedings.com/57946webtoc.pdf SN - 978-1-7138-2387-2 SP - 332 EP - 339 PB - Curran Associates Inc CY - Red Hook, NY ER - TY - CHAP A1 - Rösel, Birgit T1 - A concept of a mainly digitalized course on control theory including problembased practical units and digital supported exams T2 - HEAd'20: Sixth International Conference on Higher Education Advances, June 2 - June 5 2020, Valencia (Spain) N2 - This paper decribes the concept of a course on control theory as a minor subject in the department of electrical engineering at the OTH Regensburg. The basis for a new concept is the idea of contructive alignment. The whole teaching module is devided in two blocks. The first block contains the teaching of the knowledge about control theory with an integrated approach for lectures, exercises and practical sessions. In the second block the students attent a practical work package to have the possibility to applicate and deepen their knowledge. To foster active participation the students are asked to document and reflect their work with the course context in an electronic portfolio. The exam of this module consists of three parts with respect to the different competencies obtained during the module. This concept develops not only the knowledge on control theory but personal and social competencies which are of growing interest. The aim of the paper is to present the idea of the concept. Following papers will illustrate the development process and the results obtained later on. Y1 - 2020 U6 - https://doi.org/10.4995/HEAd20.2020.11112 ER - TY - CHAP A1 - Diamantidis, Dimitris A1 - Sýkora, Miroslav T1 - Reliability Differentiation and Uniform Risk in Standards BT - a Critical Review and a Practical Appraisal: kriticki pregled i prakticna ocjena T2 - Scientific Symposium Future Trends in Civil Engineering, Zagreb,Croatia, 17 October 2029 N2 - Reliability of structures and infrastructures is a major issue in structural engineering. Structural standards have traditionally been mainly concerned with public safety preventing loss of life or injury; this view has been shifting in recent years towards minimisation of economic loss. This contribution discusses the reliability differentiation principle in modern standards. Its aim is to achieve uniform risk levels for the various classes of structures. Codified criteria for reliability differentiation and risk informed decisions inherent in standards and especially in the Eurocodes are critically reviewed. It is shown that the classification of structures based on consequences of failure is an approach that has not been widely implemented in everyday design. Practical rules for the classification and implementation in design are needed and related proposals are presented. T2 - Razlikovanje pouzdanosti i ujednacenost rizika u propisima Y1 - 2020 U6 - https://doi.org/10.5592/CO/FTCE.2019.11 SP - 241 EP - 260 ER - TY - JOUR A1 - Frazzica, Andrea A1 - Palomba, Valeria A1 - Dawoud, Belal T1 - Thermodynamic Performance of Adsorption Working Pairs for Low-Temperature Waste Heat Upgrading in Industrial Applications JF - Applied Sciences N2 - The present work aims at the thermodynamic analysis of different working pairs in adsorption heat transformers (AdHT) for low-temperature waste heat upgrade in industrial processes. Two different AdHT configurations have been simulated, namely with and without heat recovery between the adsorbent beds. Ten working pairs, employing different adsorbent materials and four different refrigerants, have been compared at varying working boundary conditions. The effects of heat recovery and the presence of a temperature gradient for heat transfer between sinks/sources and the AdHT components have been analyzed. The achieved results demonstrate the possibility of increasing the overall performance when internal heat recovery is implemented. They also highlight the relevant role played by the existing temperature gradient between heat transfer fluids and components, that strongly affect the real operating cycle of the AdHT and thus its expected performance. Both extremely low, i.e., 40-50 degrees C, and low (i.e., 80 degrees C) waste heat source temperatures were investigated at variable ambient temperatures, evaluating the achievable COP and specific energy. The main results demonstrate that optimal performance can be achieved when 40-50 K of temperature difference between waste heat source and ambient temperature are guaranteed. Furthermore, composite sorbents demonstrated to be the most promising adsorbent materials for this application, given their high sorption capacity compared to pure adsorbents, which is reflected in much higher achievable specific energy. KW - adsorption KW - efficiency KW - heat transformer KW - heat upgrading KW - waste heat KW - working pairs Y1 - 2021 U6 - https://doi.org/10.3390/app11083389 VL - 11 IS - 8 PB - MDPI ER - TY - CHAP A1 - Altmann, Robert A1 - Gebhard, Jürgen A1 - Troeger, Adrian A1 - Winkler, Markus A1 - Töpfer, Georg A1 - Remmele, Edgar A1 - Gaderer, Matthias A1 - Rabl, Hans-Peter ED - Berns, Karsten ED - Dressler, Klaus ED - Kalmar, Ralf ED - Stephan, Nicole ED - Teutsch, Roman ED - Thul, Martin T1 - Engine performance and emission analysis of a NRMM CI engine with common rail injection system operated with diesel fuel and rapeseed oil fuel T2 - Proceedings of the 6th Commercial Vehicle Technology Symposium 2020/2021 N2 - The use of alternative fuels in high-power non-road mobile machinery (NRMM) combustion engines is a possible way to substitute fossil fuel. By using pure vegetable oil fuels, like rapeseed oil fuel (DIN 51605), the greenhouse gases can be reduced effectively. Due to the differences in physical and chemical properties, a modification of the engine control unit calibration is necessary to adapt the working process on the fuel. Without modifications, the engine power output with rapeseed oil fuel is lower than with diesel fuel because of the smaller energy content. By adapting the engine settings, like the injection fuel mass, the power loss can be compensated but it accompanies with a higher fuel consumption. The engine emissions at part load conditions show, that there are benefits in particle emissions by using rapeseed oil at similar NOx emissions. Therefore, a design of experiment setup was initiated on a selected engine operation point to determine the effects of further parameters, like rail pressure, manifold pressure and injection pattern, on the process and to see the potential of an optimized calibration. KW - CI engine KW - common rail injection KW - Diesel Engine KW - DoE KW - rapeseed oil Y1 - 2021 SN - 978-3-658-29716-9 U6 - https://doi.org/10.1007/978-3-658-29717-6_16 SP - 231 EP - 242 PB - Springer Vieweg CY - Wiesbaden ER - TY - CHAP A1 - Rill, Georg A1 - Arrieta Castro, Abel ED - Klomp, Matthijs ED - Bruzelius, Fredrik ED - Nielsen, Jens ED - Hillemyr, Angela T1 - A Novel Approach for Parametrization of Suspension Kinematics T2 - Advances in Dynamics of Vehicles on Roads and Tracks: Proceedings of the 26th Symposium of the International Association of Vehicle System Dynamics (IAVSD 2019), August 12-16, 2019, Gothenburg, Sweden N2 - n the automotive industry, simulations are needed to analyse the dynamics of vehicles and also of its main components and subsystems, e.g. tires, brakes and suspension systems. These simulations are required for an early-stage development and in consequence, they must deliver realistic results. Suspension systems plays a key role in comfort and safety of road vehicles. They usually consist of rigid links and force elements that are arranged with a specific topology. In addition, some of their functionalities are to carry the weight of the car and the passengers, and maintain a correct wheel alignment. In simulations involving suspension systems, lookup-tables are frequently used. They are obtained from a Kinematic and Compliance (KnC) test and then standardized for a specific vehicle simulation software. Nonetheless, lookup-tables require a reasonable number of characteristic points. Additionally, derivatives, interpolation, and extrapolation are not necessarily smooth. This produces results that depend on the interpolation technique and may be inaccurate. In this paper, a novel method called “design kinematics” is proposed. This method can describe the kinematic properties of almost any type of suspension systems. Comparisons with an analytic calculation and a KnC measurement shown that the design kinematics is able to represent the kinematic and compliance properties of suspension systems extremely well and very efficiently. KW - design Kinematics KW - Kinematic and compliance test KW - Suspension systems Y1 - 2020 SN - 978-3-030-38076-2 U6 - https://doi.org/10.1007/978-3-030-38077-9_210 SP - 1848 EP - 1857 PB - Springer International Publishing CY - Cham ER - TY - CHAP A1 - Rill, Georg A1 - Arrieta Castro, Abel ED - Kecskeméthy, Andrés ED - Geu Flores, Francisco ED - Carrera, Eliodoro ED - Elias, Dante A. T1 - The Influence of Axle Kinematics on Vehicle Dynamics T2 - Interdisciplinary Applications of Kinematics. Proceedings of the Third International Conference (IAK) N2 - The automotive industry employs many different kinds of axle suspension systems at modern passenger cars. Important criteria are costs, space requirements, kinematic properties, and compliance attributes. This paper illustrates that in particular the kinematic properties of a suspension system have a significant influence on the dynamics of vehicles. As a consequence, the kinematics of a suspension system must be modeled very precisely and nonlinear. Typical kinematical features of a suspension system are discussed by analyzing the most common double wishbone axle suspension system. The influence of the axle kinematics on vehicle dynamics is finally demonstrated by simulation results generated with a fully nonlinear and three-dimensional multibody vehicle model. KW - Double wishbone suspension system KW - Multibody system KW - Suspension kinematics KW - vehicle dynamics Y1 - 2019 SN - 978-3-030-16422-5 U6 - https://doi.org/10.1007/978-3-030-16423-2_2 VL - 71 SP - 23 EP - 31 PB - Springer International Publishing CY - Cham ER - TY - CHAP A1 - Rill, Georg ED - Lugner, Peter T1 - Multibody Systems and Simulation Techniques T2 - Vehicle Dynamics of Modern Passenger Cars N2 - This part begins with an introduction to Multibody Systems (MBS). It presents the elements of MBS and discusses different modeling aspects. Then, different methods to generate the equations of motion are presented. Solvers for ordinary differential equations (ODE) as well as differential algebraic equations (DAE) are discussed. Finally, techniques for “online” and “offline” simulations including real-time applications are presented like necessary for car development. Special examples show the connection between simulation and test results. KW - Differential equations KW - Equations of motion KW - Multibody systems KW - Numerical solution KW - Vehicle models Y1 - 2019 SN - 978-3-319-79007-7 U6 - https://doi.org/10.1007/978-3-319-79008-4_6 SP - 309 EP - 375 PB - Springer International Publishing CY - Cham ER - TY - CHAP A1 - Thomeczek, Ludwig A1 - Attenberger, Andreas A1 - Kolb, Johannes A1 - Matoušek, Václav A1 - Mottok, Jürgen ED - Unger, Herwig T1 - Betrachtungen zu Latenzquellen und deren Beobachtung in POSIX-Systemen am Beispiel von Container-Runtimes T2 - Echtzeit 2019 N2 - Die am weitesten verbreiteten autonomen Systeme der Zukunft sind aller Voraussicht nach intelligente Fahrzeuge, welche selbständig im Straßenverkehr navigieren und mit der Umgebung interagieren. Diese neuen Funktionen erfordern den Einsatz von performanten Mehrkernprozessoren sowie von komplexen (POSIX-kompatiblen) Betriebssystemen. Gleichzeitig erfordert der Einsatz im Automobil hohe funktionale Sicherheit (ASIL-Level), was unter anderem robuste Echtzeiteigenschaften der verwendeten Hard- und Software voraussetzt. Den Echtzeiteigenschaften steht die erhöhte Komplexität mit neuen Quellen für nichtdeterministische Latenzen gegenüber. In diesem Paper präsentieren wir eine Übersicht über diese neuen Einflussfaktoren, und vermessen anschließend Containerlaufzeitumgebungen und deren Latenzverhalten. Wir zeigen dabei, das Netzwerkbrücken unter Last erheblichen Einfluss (Faktor 4–5) auf die Netzwerklatenz ausüben können. Y1 - 2019 SN - 978-3-658-27807-6 U6 - https://doi.org/10.1007/978-3-658-27808-3_12 VL - 35 SP - 109 EP - 118 PB - Springer Fachmedien Wiesbaden CY - Wiesbaden ER - TY - JOUR A1 - Sýkora, Miroslav A1 - Diamantidis, Dimitris A1 - Holický, Milan A1 - Marková, Jana A1 - Rózsás, Árpád T1 - Assessment of compressive strength of historic masonry using non-destructive and destructive techniques JF - Construction and Building Materials N2 - Masonry structures were built by various techniques using different materials, the properties of which exhibit a considerable scatter dependent on periods of construction and region-specific conditions. For historic structures with a heritage value, various non- or minor-destructive tests (NDTs) are commonly applied, while the application of destructive tests (DTs) is minimized. The contribution is based on investigations of 15 historic stone and clay brick masonry structures, for which NDT strengths of masonry units are verified by DTs. The proposed operational approach makes it possible to account for statistical uncertainty due to a limited number of DTs used to calibrate NDTs. KW - Calibration KW - Clay bricks KW - Compressive strength KW - Mortar KW - Non-destructive test KW - Statistical analysis KW - Stone masonry KW - Uncertainty Y1 - 2018 U6 - https://doi.org/10.1016/j.conbuildmat.2018.10.180 VL - 193 IS - December SP - 196 EP - 210 PB - Elsevier ER -