TY - CHAP A1 - Hackl, Andreas A1 - Hirschberg, Wolfgang A1 - Lex, Cornelia A1 - Rill, Georg ED - Andreescu, Cristian ED - Clenci, Adrian T1 - Tyre Dynamics: Model Validation and Parameter Identification T2 - Proceedings of the European Automotive Congress EAEC-ESFA 2015 N2 - The present paper deals with the experimental validation of tyre dynamics approaches as it is widely applied in tyre models for vehicle dynamics and handling. Firstly it gives a brief derivation of two modelling principles regarding the deflection velocity in the considered direction of the tyre’s deformation. This is than followed by a brief description of the performed measurement procedure. From the measurements, a set of model parameters of the considered tyre, depending on different manoeuvre speeds and frequencies, is identified, where no particular fitting parameters for the tyre dynamics are needed. Based on these model parameters, the related dynamic simulations are carried out. The comparisons show that the applied first-order model describes the behaviour quite well within a certain operation range, whereas the second-order approach cannot deliver better results in spite of the longer computational time. However, for investigations within an enlarged frequency range of the steer input and at high slip angles, a more detailed model is recommended. KW - Semi-physical model KW - Tyre dynamics modelling KW - Tyre testing KW - vehicle dynamics Y1 - 2016 SN - 978-3-319-27275-7 U6 - https://doi.org/10.1007/978-3-319-27276-4_20 VL - 45 SP - 219 EP - 232 PB - Springer CY - Cham ER - TY - CHAP A1 - Hopfensperger, Bernhard A1 - Daubner, Andreas A1 - Herrmann, Fabian A1 - Hopkins, Andrew A1 - Mellor, Phil T1 - Investigation of Shifted PWM Methods for a Dual Three-Phase System to Reduce Capacitor RMS Current T2 - PCIM Europe Digital Days 2020: International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management: 07.-08.07.2020, Online [proceedings] N2 - Mild hybrid automotive topologies containing a 48V high power (>15 kW) electric drive system demand a high integration of power electronics and electrical machine. A multi-phase motor winding topology helps to keep the per-phase operating currents to a reasonable level. Close integration and multi-phase system have led to a drive system with dual 3-phase systems supplied by a common 48V DC-link, which allows to shift PWM patterns for reduction of DC-link capacitor ripple current and size. This paper derives some basic rules for combinations of common PWM methods for dual 3-phase systems without magnetic cross-coupling. Experimental measurements verify simulated results. KW - Elektroantrieb KW - dual three phase system Y1 - 2020 UR - https://ieeexplore.ieee.org/document/9177989 SN - 978-3-8007-5245-4 SP - 124 EP - 131 PB - VDE-Verlag CY - Berlin, Offenbach ER - TY - CHAP A1 - Becke, Mark ED - Liu, Honghai ED - Kubota, Naoyuki ED - Zhu, Xiangyang ED - Dillmann, Rüdiger T1 - On Modeling and Least Squares Fitting of Cylinders from Single and Multiple Views Using Contour Line Features T2 - Intelligent Robotics and Applications N2 - In this paper, a new method for a minimum-error pose estimation of cylinder axes based on apparent contour line features from multiple views is presented. Novel model equations for both single and particularly multiple views are derived, and based upon these, an algorithm for least squares fitting the model to imaged cylinder contour line features is introduced. The good performance of the proposed algorithm is shown by solving an exemplary fitting problem. KW - Apparent contour KW - Computer vision KW - Least squares fitting KW - Multiple view geometry KW - Straight Homogeneous Circular Cylinder Y1 - 2015 SN - 978-3-319-22872-3 U6 - https://doi.org/10.1007/978-3-319-22873-0_33 VL - 9246 SP - 372 EP - 385 PB - Springer CY - Cham ER - TY - CHAP A1 - Böhm, Valter A1 - Schorr, Philipp A1 - Zimmermann, Klaus A1 - Zentner, Lena T1 - An Approach to the Estimation of the Actuation Parameters for Mobile Tensegrity Robots with Tilting Movement Sequences T2 - 2018 International Conference on Reconfigurable Mechanisms and Robots (ReMAR); 20-22 June 2018; Delft, Netherlands N2 - This paper deals with the locomotion by tilting sequences of shape-variable compliant tensegrity structures. The shape of these structures is controlled by manipulating their prestress state. The tensegrity structure is tilting as consequence of a suitable variation of its shape. By multiple repetition of such tilting sequences a motion is generated. Quasi-static considerations for the considered structures are presented in order to estimate the actuation parameters. For a proper number of actuators this quasi-static approach enables an analytical calculation of the actuation parameters of the structure in order to control the geometrical configuration as required. As an example a two-dimensional tensegrity structure which is in contact with a horizontal plane due to gravity is considered. By successive tilting sequences a uniaxial motion results. The excitation of the structure is calculated for a given change of shape with the quasi-static analysis. The according results are compared with transient dynamic simulations. Qualitative conclusions about the motion behavior and the usability of the quasi-static approach are given. KW - mobile robots KW - motion control KW - robot dynamics KW - structural engineering Y1 - 2018 U6 - https://doi.org/10.1109/REMAR.2018.8449871 SP - 1 EP - 8 PB - IEEE ER - TY - CHAP A1 - Briem, Ulrich ED - Dohm, Martin T1 - Fatigue Behaviour of Rope Wires T2 - Proceedings of the OIPEEC Conference, La Rochelle, France, 12th - 15th March 2019 N2 - The rope curve line of a tensioned rope can be described by means of the catenary curve. Opposed to that, the curved line of a free bent rope cannot be described by an analytical function. Practical applications of free bending are for example at tail ropes at the bottom of shaft in rope drives with traction sheaves. The question whether the maximum diameter of rope loop is small enough for the diameter of the shaft is highly interesting. In [1] a method was presented to calculate the curved line of free bent ropes numerically by help of energy methods. An analytical description of rope curve line would be very helpful. Beginning with the structure of a rope curve line of tensioned rope (catenary curve) and considering the influence of bending stiffness, the structure of an analytical equation for the curve line of a free bent rope will be developed. The main focus of this paper is to develop and to describe the structure of such an analytical equation. To get a first idea about the values of the constants in that analytical equation a few test results were evaluated. But these equations consider the static rope behavior only. Due to dynamic effects in the rope while running through the loop at the bottom of a shaft, pendulousness of the tail rope occurs. Y1 - 2019 UR - https://oipeec.org/products/mathematical-approach-to-curve-line-of-free-bent-ropes PB - OIPEEC ER - TY - CHAP A1 - Briem, Ulrich ED - Dohm, Martin T1 - Mathematical Approach to Curve Line of free bent Ropes T2 - Proceedings of the OIPEEC Conference, La Rochelle, France, 12th - 15th March 2019 N2 - The rope curve line of a tensioned rope can be described by means of the catenary curve. Opposed to that, the curved line of a free bent rope cannot be described by an analytical function. Practical applications of free bending are for example at tail ropes at the bottom of shaft in rope drives with traction sheaves. The question whether the maximum diameter of rope loop is small enough for the diameter of the shaft is highly interesting. In [1] a method was presented to calculate the curved line of free bent ropes numerically by help of energy methods. An analytical description of rope curve line would be very helpful. Beginning with the structure of a rope curve line of tensioned rope (catenary curve) and considering the influence of bending stiffness, the structure of an analytical equation for the curve line of a free bent rope will be developed. The main focus of this paper is to develop and to describe the structure of such an analytical equation. To get a first idea about the values of the constants in that analytical equation a few test results were evaluated. But these equations consider the static rope behavior only. Due to dynamic effects in the rope while running through the loop at the bottom of a shaft, pendulousness of the tail rope occurs. KW - Bending Stiffness KW - Catenary KW - Free Bending KW - Rope Curvature KW - Tail Ropes Y1 - 2019 UR - https://oipeec.org/products/mathematical-approach-to-curve-line-of-free-bent-ropes PB - OIPEEC ER - TY - CHAP A1 - Schneider, Sebastian A1 - Mühlbauer, Christian A1 - Sittl, Christopher A1 - Rottengruber, Hermann A1 - Rabl, Hans-Peter A1 - Wagner, Marcus A1 - Verhey, Jesko L. ED - Rottengruber, Hermann ED - Luft, Tommy ED - Schneider, Sebastian T1 - Tickergeräuschanalyse an einem Otto-DI-Motor mittels empirischer Bewertungsformel T2 - Motor- und Aggregate-Akustik: 11. Magdeburger Symposium, Tagungsband N2 - Beim Kauf eines Pkw wird der akustische Qualitätseindruck eines Fahrzeugantriebstrangs stetig relevanter. Die wahrgenommene Geräuschqualität des Motoraggregates nimmt hierbei eine Schlüsselrolle ein. Aufgrund der Ausprägung einzelner Störgeräusche wird jene Geräuschqualität negativ beeinflusst. Diese als unangenehm empfundenen Geräuschkomponenten gilt es im Rahmen der Fahrzeugentwicklung weiter zu reduzieren, wobei die Identifikation und Bewertung störender Geräuschanteile am Motorgesamtgeräusch Voraussetzungen für eine effektive Akustikoptimierung sind. Vor allem das impulshafte Tickergeräusch wird bei Otto-DI-Motoren als besonders lästig eingestuft, weswegen dieser Beitrag darauf abzielt, die tickernden Geräuschanteile aus dem Gesamtgeräusch zu analysieren und zu bewerten. Hierzu wurde eine empirische Formel entwickelt, welche die tickernden Geräuschanteile in ihrer Intensität in Grenzen einstufen kann. Diese ist rein empfindungsbasiert und besteht aus der Impulshaftigkeit, der Lautheit sowie der Schärfe des Motorgesamtgeräusches. Wie auch bei anderen psychoakustischen Bewertungsskalen wurde die Benotung von 1 (sehr tickernd) bis 10 (nicht tickernd) vorgenommen. Anhand von Hörversuchen mithilfe einer Expertenjury konnte die Tickergeräuschbewertungsformel anschließend verifiziert werden. Hiernach kann präzise ausgesagt werden, in welchen Motorkennfeldbereichen das Tickergeräusch die Angenehmheit des Motorgesamtgeräusches untergräbt. KW - Messtechnik KW - Geräuschentwicklung KW - Psychoakustik KW - Schallentstehung Y1 - 2021 SN - 978-3-948749-02-6 U6 - https://doi.org/10.25673/36611 SP - 65 EP - 86 PB - Otto-von-Guericke-Universität CY - Magdeburg ER - TY - CHAP A1 - Schneider, Sebastian A1 - Hots, Jan A1 - Luft, Tommy A1 - Rottengruber, Hermann A1 - Verhey, Jesko L. A1 - Rabl, Hans-Peter T1 - Entwicklung einer empirischen Formel zur Bewertung der Tickergeräuschanteile von Motorgeräuschen T2 - DAGA 2019 - 45. Jahrestagung für Akustik, 8.-21. März 2019, Rostock Y1 - 2019 UR - https://pub.dega-akustik.de/DAGA_2019/data/daga19_proceedings.pdf SN - 978-3-939296-14-0 VL - 45 SP - 643 EP - 646 PB - Deutsche Gesellschaft für Akustik e.V. ER - TY - CHAP A1 - Rieger, Anna A1 - Mühlbauer, Christian A1 - Weber, Rainer A1 - Rabl, Hans-Peter T1 - Measures to Address the Dissonance Perception of Multiple Tonal Components in Sounds T2 - DAGA 2019 - 45. Jahrestagung für Akustik, 18.-21. März 2019, Rostock Y1 - 2019 UR - https://pub.dega-akustik.de/DAGA_2019/data/articles/000499.pdf VL - 45 SP - 375 EP - 378 PB - Deutsche Gesellschaft für Akustik e.V. ER - TY - CHAP A1 - Rieger, Anna A1 - Oetjen, Arne A1 - van de Par, Steven A1 - Rabl, Hans-Peter T1 - Einfluss der Dissonanz auf die Wahrnehmung der Geräuschqualität T2 - Fortschritte der Akustik DAGA 2022: 48. Jahrestagung für Akustik, 21. - 24. März 2022, Stuttgart und Online Y1 - 2022 UR - https://www.dega-akustik.de/publikationen/online-proceedings/ VL - 48 PB - Deutsche Gesellschaft für Akustik e.V. CY - Stuttgart ER -