TY - GEN A1 - Sterner, Michael T1 - The role of green H 2 + Power-to-X in the German Energy Transition T2 - First Brazilian-German Green Hydrogen Congress, Brasilia 06.10.2020 KW - Erneuerbare Energien KW - Klimaneutralität KW - Energiewende KW - Sektorenkopplung KW - Wasserstoff KW - Power-to-X Y1 - 2020 ER - TY - GEN A1 - Sterner, Michael T1 - Die Grenzen des Wasserstoff-Hypes T2 - 1. Mitteldeutscher Wasserstoffkongress, 2. November 2021, Leuna CCE Kulturhaus KW - Erneuerbare Energien KW - Klimaneutralität KW - Energiewende KW - Wasserstoff Y1 - 2021 ER - TY - CHAP A1 - Altmann, Robert A1 - Gebhard, Jürgen A1 - Troeger, Adrian A1 - Winkler, Markus A1 - Töpfer, Georg A1 - Remmele, Edgar A1 - Gaderer, Matthias A1 - Rabl, Hans-Peter ED - Berns, Karsten ED - Dressler, Klaus ED - Kalmar, Ralf ED - Stephan, Nicole ED - Teutsch, Roman ED - Thul, Martin T1 - Engine performance and emission analysis of a NRMM CI engine with common rail injection system operated with diesel fuel and rapeseed oil fuel T2 - Proceedings of the 6th Commercial Vehicle Technology Symposium 2020/2021 N2 - The use of alternative fuels in high-power non-road mobile machinery (NRMM) combustion engines is a possible way to substitute fossil fuel. By using pure vegetable oil fuels, like rapeseed oil fuel (DIN 51605), the greenhouse gases can be reduced effectively. Due to the differences in physical and chemical properties, a modification of the engine control unit calibration is necessary to adapt the working process on the fuel. Without modifications, the engine power output with rapeseed oil fuel is lower than with diesel fuel because of the smaller energy content. By adapting the engine settings, like the injection fuel mass, the power loss can be compensated but it accompanies with a higher fuel consumption. The engine emissions at part load conditions show, that there are benefits in particle emissions by using rapeseed oil at similar NOx emissions. Therefore, a design of experiment setup was initiated on a selected engine operation point to determine the effects of further parameters, like rail pressure, manifold pressure and injection pattern, on the process and to see the potential of an optimized calibration. KW - CI engine KW - common rail injection KW - Diesel Engine KW - DoE KW - rapeseed oil Y1 - 2021 SN - 978-3-658-29716-9 U6 - https://doi.org/10.1007/978-3-658-29717-6_16 SP - 231 EP - 242 PB - Springer Vieweg CY - Wiesbaden ER - TY - CHAP A1 - Buttner, Johannes A1 - Alonso-Villa, Cristina A1 - Bohigas Boladeras, Pere A1 - Kucera, Markus A1 - Waas, Thomas T1 - The Need for New Software Architectures for Next-generation Vehicle T2 - Proceedings of the 5th International E-Conference on Advances in Engineering, Technology and Management (ICETM 2021) N2 - Assuming that future connected cars with automated driving functions will require even more computing power and communication bandwidth, the current network infrastructure as well as the existing individualized control units are not a profitable option for such vehicles. In addition, changing user expectations demand flexible architectural patterns and upgradeability of software components without the need to visit the workshop. However, the current statically developed and configured ECU architecture does not offer any practicable possibilities for this. For these reasons, the research for a new dynamic and flexible architecture is necessary. This new type of system architecture is expected to meet future requirements in terms of space, cost, performance, energy efficiency and number of required computing units in the vehicle, which will arise as a result of the implementation/inclusion of new automated driving functionalities, and due to the changes in user expectations. Solutions to this issue can be found in the field of enterprise IT (cluster computing), in which technologies such as Ethernet, container-based virtualization and flexible software architectures have proven themselves to be very efficient for years. Relevant infrastructures, for example from cloud computing providers, have commonly been used in high-performance or high-availability applications. Thus, in the research project A 3F has been investigated which of these concepts and methods can be applied to modern vehicle system architectures. One of the main goals is to assess the synergy potential of the two sectors, information technology and automotive industry, which to date have very different orientations. However, this synergy is expected to grow strongly in the course of the developments mentioned above. In the following pages, the necessary changes related to hardware and software will be discussed briefly und will be compared to concepts and possible solutions from the IT world. Y1 - 2021 UR - https://www.seekdl.org/conferences/paper/details/10605.html SN - 978-1-63248-192-4 SP - 58 EP - 61 ER - TY - CHAP A1 - Mühlbauer, Christian A1 - Rabl, Hans-Peter A1 - Rottengruber, Hermann T1 - Akustische Optimierung von mechatronischen Direkteinspritzsystemen und Analyse der Auswirkungen auf die Robustheit im Systembetrieb T2 - Motor- und Aggregate-Akustik: 11. Magdeburger Symposium, Tagungsband N2 - The tightening of the emission legislation and political and social demands for sustainable mobility are forcing the automotive industry to develop complex, high precision mechatronic drive systems. The increasing precision of mechatronic components generally leads to an increase in structural excitation and thus to a rise in noise. The socalled ticking of the fuel injection system has a rather low sound pressure level compared to the residual engine noise. Nevertheless, the impulsive and high frequency noise character leads to a decline concerning the perception of comfort and sound quality. In order to identify the sound quality of fuel injection systems as a frontloading measure, a system test bench has been developed which represents the structureborne and airborne sound radiation of the stand-alone injection system in a close to series configuration. In this paper, measures for the acoustic optimization of injection systems and their effects on the robustness of the system are discussed. The focus is on engine idling, since at this operating point the ticking of the injectors and the high-pressure pump can be perceived most clearly due to the low masking effects of other noise sources. For this purpose, the injection parameters were measured during full engine operation and transferred to the system test bench. By using a special development control unit, it was possible to modify the parameters, quantify their influence on the acoustic behavior and, based on this, define NVH optimized control strategies. For the robustness evaluation of the NVH optimized control strategies, key functions of the injection system were analyzed under varying boundary conditions in system operation on an injection rate test bench. N2 - Die Verschärfung der Abgasgesetzgebung sowie die politischen und gesellschaftlichen Forderungen an eine nachhaltige Mobilität zwingen die Automobilindustrie zur Entwicklung komplexer, hochpräziser mechatronischer Antriebssysteme. Die zunehmende Präzision der mechatronischen Komponenten führt dabei in der Regel zu einer Zunahme der Strukturanregung und damit zu einer Erhöhung der Störgeräusche. Das so genannte Tickern des Kraftstoffeinspritzsystems hat im Vergleich zum Restmotorgeräusch einen niedrigeren Schalldruckpegel. Dennoch führt der impulshaltige und hochfrequente Geräuschcharakter zu einem Mangel in der Komfort- und Qualitäts- 32 wahrnehmung. Um die Geräuschqualität von raftstoffeinspritzsystemen als Frontloading-Maßnahme zu identifizieren, wurde ein Systemprüfstand entwickelt, der die Körper- und Luftschallabstrahlung des Einspritzsystems in seriennaher Konfiguration abbildet. In diesem Beitrag werden Maßnahmen zur akustischen Optimierung von Einspritzsystemen und deren Auswirkungen auf die Robustheit im Systembetrieb diskutiert. Der Fokus liegt dabei auf dem Motorleerlauf, da an diesem Betriebspunkt das Tickern der Injektoren und der Hochdruckpumpe durch den geringen Maskierungseffekt anderer Geräusche am deutlichsten wahrzunehmen ist. Dazu wurden die Einspritzparameter im Vollmotorbetrieb erfasst und auf den Systemprüfstand transferiert. Durch ein spezielles Entwicklungssteuergerät war es möglich, die Parameter zu modifizieren, deren Einfluss auf das akustische Verhalten zu quantifizieren und darauf aufbauend NVHoptimierte Ansteuerstrategien zu definieren. Zur Robustheitsbewertung der NVHoptimierten Ansteuerstrategien wurden Schlüsselfunktionen des Einspritzsystems unter variierenden Randbedingungen im Systembetrieb analysiert. Y1 - 2021 U6 - https://doi.org/10.25673/36611 VL - 11 SP - 32 EP - 51 PB - Otto-von-Guericke-Universität CY - Magdeburg ER - TY - CHAP A1 - Schneider, Sebastian A1 - Mühlbauer, Christian A1 - Sittl, Christopher A1 - Rottengruber, Hermann A1 - Rabl, Hans-Peter A1 - Wagner, Marcus A1 - Verhey, Jesko L. ED - Rottengruber, Hermann ED - Luft, Tommy ED - Schneider, Sebastian T1 - Tickergeräuschanalyse an einem Otto-DI-Motor mittels empirischer Bewertungsformel T2 - Motor- und Aggregate-Akustik: 11. Magdeburger Symposium, Tagungsband N2 - Beim Kauf eines Pkw wird der akustische Qualitätseindruck eines Fahrzeugantriebstrangs stetig relevanter. Die wahrgenommene Geräuschqualität des Motoraggregates nimmt hierbei eine Schlüsselrolle ein. Aufgrund der Ausprägung einzelner Störgeräusche wird jene Geräuschqualität negativ beeinflusst. Diese als unangenehm empfundenen Geräuschkomponenten gilt es im Rahmen der Fahrzeugentwicklung weiter zu reduzieren, wobei die Identifikation und Bewertung störender Geräuschanteile am Motorgesamtgeräusch Voraussetzungen für eine effektive Akustikoptimierung sind. Vor allem das impulshafte Tickergeräusch wird bei Otto-DI-Motoren als besonders lästig eingestuft, weswegen dieser Beitrag darauf abzielt, die tickernden Geräuschanteile aus dem Gesamtgeräusch zu analysieren und zu bewerten. Hierzu wurde eine empirische Formel entwickelt, welche die tickernden Geräuschanteile in ihrer Intensität in Grenzen einstufen kann. Diese ist rein empfindungsbasiert und besteht aus der Impulshaftigkeit, der Lautheit sowie der Schärfe des Motorgesamtgeräusches. Wie auch bei anderen psychoakustischen Bewertungsskalen wurde die Benotung von 1 (sehr tickernd) bis 10 (nicht tickernd) vorgenommen. Anhand von Hörversuchen mithilfe einer Expertenjury konnte die Tickergeräuschbewertungsformel anschließend verifiziert werden. Hiernach kann präzise ausgesagt werden, in welchen Motorkennfeldbereichen das Tickergeräusch die Angenehmheit des Motorgesamtgeräusches untergräbt. KW - Messtechnik KW - Geräuschentwicklung KW - Psychoakustik KW - Schallentstehung Y1 - 2021 SN - 978-3-948749-02-6 U6 - https://doi.org/10.25673/36611 SP - 65 EP - 86 PB - Otto-von-Guericke-Universität CY - Magdeburg ER - TY - CHAP A1 - Brückl, Oliver A1 - Wildfeuer, M. A1 - Schächinger, J. T1 - Systemdienstleistungen durch Biogasanlagen T2 - Biogas in der Landwirtschaft - Stand und Perspektiven: 7. FNR/KTBL-Onlinetagung 29.-30.09.2021, Darmstadt KW - Biogasanlage Y1 - 2021 SN - 978-3-945088-83-8 SP - 92 EP - 101 CY - Darmstadt ER - TY - CHAP A1 - Jupke, Michael A1 - Reindl, Andrea A1 - Meier, Hans A1 - Niemetz, Michael ED - Pinker, Jiří T1 - Bidirectional DC-DC Converter with Digital Droop Parameterization T2 - 26th 2021 International Conference on Applied Electronics (AE): 7-8 Sept. 2021 Pilsen, Czech Republic N2 - The key for decentralized battery systems is a robust and communication-less control strategy for autonomous power sharing of parallel-connected DC-DC converters. Battery systems improve the reliability and quality of power supply in renewable energy systems and enable power supply for off-grid, mobile applications, including islanded grids, home storage, and electric vehicles. In many cases, components with different electrical properties require different voltage levels. An adaptation is consequently essential and is normally implemented in DC grids for the batteries via bidirectional DC-DC converters. The power flow in both directions can thus be ensured. To achieve a power distribution in parallel connected DC-DC converters, a droop control in the form of a virtual internal resistor can be used. This paper presents a novel approach of a DC-DC converter with a digitally parameterizable droop resistor, whose voltage regulation is based on an analog operational amplifier circuit to ensure low delays and robustness. The droop resistor is adjusted with a microcontroller, which offers the possibility to apply a higher-level control for load sharing via an interface. Mathematical correlations are used to clearly define the parameters of the control. Furthermore, the circuit was completely simulated and tested in the hardware setup. The shown results verify the functionality and indicate only minor deviations. Therefore, this circuit is important for future use in distributed battery systems. KW - battery storage plants KW - DC-DC power convertors KW - power convertors KW - distributed power generation KW - microcontrollers KW - voltage regulators KW - voltage control KW - power generation control KW - power grids Y1 - 2021 SN - 978-80-261-0972-3 U6 - https://doi.org/10.23919/AE51540.2021.9542920 SP - 1 EP - 6 PB - Institute of Electrical and Electronics Engineers ER - TY - CHAP A1 - Reindl, Andrea A1 - Singer, Thomas A1 - Meier, Hans A1 - Niemetz, Michael A1 - Park, Sangyoung T1 - Framework to Test DC-DC Converters Developed for a Decentralized Battery Management System T2 - 2021 International Conference on Applied Electronics (AE): 7-8 Sept. 2021, Pilsen, Czech Republic N2 - DC- DC converters control the power flow and thus the power distribution between the components on different voltage levels. They are essential for (dis)charging batteries and influence the safety and stability of the entire battery management system (BMS). Therefore, testing the functionality and the reliability of DC-DC converters is crucial. This is especially true for decentralized battery management systems (DBMS), where multiple nodes communicate to collectively control the system. The used DC-DC converters are modified to parameterize them during operation via microcontroller interfaces. Integrating the communication into the control loop requires an analysis of the control behavior due to additional delays. Therefore, this paper proposes a framework to test DC-DC converters considering the control and communication perspectives. The response time, the control accuracy and stability of these DC-DC converters, e.g., under continuous and abrupt load changes, are measured in automated tests. The dedicated software framework simulates the DBMS and stimulates the hardware components (e.g. electronic loads, data acquisition) via respective interfaces (CAN, RS232). This allows the test of various DC-DC converters with flexibly adaptable load and power generation profiles. An initial application validates the test framework by verifying the aforementioned aspects and thus the applicability of a DC-DC converter within the DBMS. KW - Batteries KW - Battery management system KW - Battery management systems KW - Control systems KW - DC-DC converter KW - DC-DC power converters KW - decentralized control KW - hardware in the loop testing KW - object oriented programming KW - Power system stability KW - Python KW - Stability analysis KW - system testing KW - Time measurement Y1 - 2021 U6 - https://doi.org/10.23919/AE51540.2021.9542882 SP - 1 EP - 6 PB - IEEE ER - TY - CHAP A1 - Reindl, Andrea A1 - Meier, Hans A1 - Niemetz, Michael A1 - Park, Sangyoung T1 - Decentralized Battery Management System with Customized Hardware Components T2 - IEEE 19th Student Conference on Research and Development (SCOReD), Sustainable Engineering and Technology towards Industry Revolution: 23-25 Nov. 2021, Kota Kinabalu, Malaysia N2 - With an increasing number of sold electric vehicles (EVs), a large number of used batteries will be at disposal. How to deal with these resources is one of the major challenges in reducing the environmental impact of batteries throughout their entire life cycle. Heterogeneous cell parameters due to the different usage histories are a challenge for second-life use. The effort and cost of remanufacturing required to test and assemble a new battery pack is a further concern. Systems that combine battery packs/modules without full reassembly offer advantages such as cost and reusability. A decentralized battery management system (DBMS) provides a suitable architecture for such systems involving different types of batteries. In this paper, an architecture for a decentralized, battery state-dependent control is shown. The proposed DBMS supports various types of batteries, is scalable and flexibly adaptable for a wide range of applications. Despite the significant advantages, there are increased requirements to meet for the hardware implementation and the applied control strategies. Therefore, the necessary hardware components and their requirements are described and the hardware implementations are provided. KW - battery fitness KW - Battery management system KW - Battery management systems KW - bidirectional power flow KW - Computer architecture KW - Costs KW - DC-DC power converters KW - decentralized control KW - Electric vehicles KW - Hardware KW - load sharing KW - Microprocessors KW - Renewable energy sources KW - second life battery Y1 - 2021 U6 - https://doi.org/10.1109/SCOReD53546.2021.9652737 SP - 350 EP - 355 PB - IEEE ER -